ISO 6506-1:2014
Current
The latest, up-to-date edition.
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
English, French
09-25-2014
ISO 6506-1:2014 specifies the method for the Brinell hardness test for metallic materials. It is applicable to both fixed location and portable hardness testing machines.
For some specific materials and/or products, particular International Standards exist (e.g. ISO 4498) and make reference to this International Standard.
DevelopmentNote |
Supersedes ISO 6506 and ISO 410 (04/2001) 1999 version also revised by ISO 6506-4:2005. (12/2005) Supersedes ISO/DIS 6506-1. (09/2014)
|
DocumentType |
Standard
|
Pages |
16
|
PublisherName |
International Organization for Standardization
|
Status |
Current
|
Supersedes |
Standards | Relationship |
UNI EN ISO 6506-1:2015 | Identical |
JIS Z 2243-1:2018 | Identical |
NF EN ISO 6506-1 : 2014 | Identical |
NBN EN ISO 6506-1 : 2014 | Identical |
NEN EN ISO 6506-1 : 2014 | Identical |
NS EN ISO 6506-1 : 2014 | Identical |
I.S. EN ISO 6506-1:2014 | Identical |
PN EN ISO 6506-1 : 2014 | Identical |
SN EN ISO 6506-1:2014 | Identical |
UNI EN ISO 6506-1 : 2006 | Identical |
SS-EN ISO 6506-1:2014 | Identical |
UNE-EN ISO 6506-1:2015 | Identical |
BS EN ISO 6506-1:2014 | Identical |
EN ISO 6506-1:2014 | Identical |
DIN EN ISO 6506-1:2015-02 | Identical |
SANS 6506-1:2009(R2020) | Identical |
SANS 6506-1 : 2ED 2009 | Identical |
NF EN ISO 9015-1 : 2011 | DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS - HARDNESS TESTING - PART 1: HARDNESS TEST ON ARC WELDED JOINTS |
DIN EN ISO 6506-2:2016-04 (Draft) | METALLIC MATERIALS - BRINELL HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES (ISO 6506-2:2014) |
UNE-EN 14811:2007 | Railway applications - Track - Special purpose rail - Grooved and associated construction |
UNE-EN 10088-5:2010 | Stainless steels - Part 5: Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes |
BS EN 4700-001:2010 | Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Plate, sheet and strip |
BS EN 10253-2:2007 | Butt-welding pipe fittings Non alloy and ferritic alloy steels with specific inspection requirements |
I.S. EN 14688:2015 | SANITARY APPLIANCES - WASH BASINS - FUNCTIONAL REQUIREMENTS AND TEST METHODS |
ISO 5922:2005 | Malleable cast iron |
14/30303794 DC : 0 | BS EN 438-2 - HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 2: DETERMINATION OF PROPERTIES |
I.S. EN ISO 11118:2015&LC:2015-12 | GAS CYLINDERS - NON-REFILLABLE METALLIC GAS CYLINDERS - SPECIFICATION AND TEST METHODS (ISO 11118:2015) |
PREN 17142 : DRAFT 2017 | MODULAR MULTILAYER FLOOR COVERINGS - ELEMENTS WITH A WOOD POWDER BASED SURFACE LAYER - SPECIFICATIONS, REQUIREMENTS AND TEST METHODS |
PREN 438-2 : DRAFT 2014 | HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 2: DETERMINATION OF PROPERTIES |
02/704957 DC : DRAFT NOV 2002 | ISO 683-14 - HEAT-TREATABLE STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 14: HOT-ROLLED STEELS FOR QUENCHED AND TEMPERED SPRINGS |
ISO 13092:2012 | Titanium and titanium alloys — Titanium sponge |
16/30258478 DC : 0 | BS EN 13674-2 - RAILWAY APPLICATIONS - TRACK - RAIL - PART 2: SWITCH AND CROSSING RAILS USED IN CONJUNCTION WITH VIGNOLE RAILWAY RAILS 46 KG/M AND ABOVE |
11/30196123 DC : DRAFT MAY 2011 | BS ISO 11119-2 - GAS CYLINDERS OF COMPOSITE CONSTRUCTION - SPECIFICATION AND TEST METHODS - PART 2: FULLY WRAPPED FIBRE REINFORCED COMPOSITE GAS CYLINDERS WITH LOAD-SHARING METAL LINERS |
ISO 404:2013 | Steel and steel products — General technical delivery requirements |
ISO 16631:2016 | Ductile iron pipes, fittings, accessories and their joints compatible with plastic (PVC or PE) piping systems, for water applications and for plastic pipeline connections, repair and replacement |
UNE-EN ISO 5182:2017 | Resistance welding - Materials for electrodes and ancillary equipment (ISO 5182:2016) |
API 11D3 :2008 | PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - SURFACE-DRIVE SYSTEMS |
10/30217322 DC : 0 | BS EN 1338 - CONCRETE PAVING BLOCKS - REQUIREMENTS AND TEST METHODS |
12/30250149 DC : 0 | BS ISO 16143-2 - STAINLESS STEELS FOR GENERAL PURPOSES - PART 2: SEMI-FINISHED PRODUCTS, BARS, RODS AND SECTIONS |
06/30148182 DC : DRAFT MAY 2006 | ISO 7866 - GAS CYLINDERS REFILLABLE SEAMLESS ALUMINIUM ALLOY GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING |
DIN EN ISO 11118:2016-03 | GAS CYLINDERS - NON-REFILLABLE METALLIC GAS CYLINDERS - SPECIFICATION AND TEST METHODS |
12/30254917 DC : DRAFT JAN 2012 | BS EN 877 - CAST IRON PIPES AND FITTINGS, THEIR JOINTS AND ACCESSORIES FOR THE EVACUATION OF WATER FROM BUILDINGS - REQUIREMENTS, TEST METHODS AND QUALITY ASSURANCE |
13/30290101 DC : 0 | BS EN 4700-2 - AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 002: BAR AND SECTION |
17/30312468 DC : 0 | BS ISO 15461 - STEEL FORGINGS - TESTING FREQUENCY, SAMPLING CONDITIONS AND TEST METHODS FOR MECHANICAL TESTS |
PREN 598 : DRAFT 2017 | COATED AND LINED DUCTILE IRON PIPES, FITTINGS AND THEIR JOINTS FOR SEWERAGE AND DRAINAGE APPLICATIONS - PRODUCTS CHARACTERISTICS AND TEST AND ASSESSMENT METHODS |
17/30337413 DC : 0 | BS EN ISO 4957 - TOOL STEELS |
BS EN 10088-5:2009 | Stainless steels Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes |
UNE-EN 1563:2012 | Founding - Spheroidal graphite cast irons |
DIN EN 12449:2015-11 (Draft) | COPPER AND COPPER ALLOYS - SEAMLESS, ROUND TUBES FOR GENERAL PURPOSES |
API 7-1 : 2006 : ADD 3:2011(R2015) | SPECIFICATION FOR ROTARY DRILL STEM ELEMENTS |
BS EN ISO 14998:2013 | Petroleum and natural gas industries. Downhole equipment. Completion accessories |
API 5DP CHINESE : 2009 | SPECIFICATION FOR DRILL PIPE |
BS ISO 7689:2008 | Aerospace. Bolts, with MJ threads, made of alloy steel, strength class 1100 MPa. Procurement specification |
ISO 21988:2006 | Abrasion-resistant cast irons Classification |
12/30273548 DC : 0 | BS EN 61439-5 - LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 5: PARTICULAR REQUIREMENTS FOR ASSEMBLIES FOR POWER DISTRIBUTION IN PUBLIC NETWORKS |
08/30168345 DC : DRAFT JULY 2008 | BS ISO 15136-1 - DOWNHOLE EQUIPMENT FOR PETROLEUM AND NATURAL GAS INDUSTRIES - PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - PART 1: PUMPS |
UNI EN 4700-006 : 2011 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 006: PRE-PRODUCTION AND PRODUCTION FORGINGS |
DIN 17751:2002-09 | TUBES OF WROUGHT NICKEL AND NICKEL ALLOYS - PROPERTIES |
13/30247437 DC : 0 | BS EN ISO 683-17 - HEAT-TREATED STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 17: BALL AND ROLLER BEARING STEELS (ISO/DIS 683-17:2013) |
BS ISO 17804:2005 | Founding. Ausferritic spheroidal graphite ausferrite cast iron. Classification |
BIS IS 1500-2 : 2013 | METALLIC MATERIALS - BRINELL HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES |
13/30279057 DC : 0 | BS ISO 683-4 - HEAT-TREATABLE STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 4: FREE-CUTTING STEELS |
DIN 6773:2001-04 | HEAT TREATMENT OF FERROUS METALS - HEAT TREATED PARTS, PRESENTATION AND INDICATIONS ON DRAWINGS |
I.S. EN 10349:2009 | STEEL CASTINGS - AUSTENITIC MANGANESE STEEL CASTINGS |
EN 10085:2001 | Nitriding steels - Technical delivery conditions |
BS EN 15566:2016 | Railway applications. Railway rolling stock. Draw gear and screw coupling |
UNI EN 13600 : 2013 | COPPER AND COPPER ALLOYS - SEAMLESS COPPER TUBES FOR ELECTRICAL PURPOSES |
DIN EN 14811:2016-08 (Draft) | RAILWAY APPLICATIONS - TRACK - SPECIAL PURPOSE RAIL - GROOVED AND ASSOCIATED CONSTRUCTION |
09/30185939 DC : 0 | BS EN 12513 - FOUNDING - ABRASION RESISTANT CAST IRONS |
BS EN 16124:2011 | Founding. Low-alloyed ferritic spheroidal graphite cast irons for elevated temperature applications |
DIN 3523:2001-04 | Fittings for drinking water installations - Extensions |
12/30258463 DC : 0 | BS EN 16451 - RAILWAY APPLICATIONS - BRAKING - BRAKE PAD HOLDER |
14/30311463 DC : 0 | BS EN 14688 - SANITARY APPLIANCES - WASH BASINS - FUNCTIONAL REQUIREMENTS AND TEST METHODS |
11/30254168 DC : 0 | BS EN 10088-3 - STAINLESS STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR SEMI-FINISHED PRODUCTS, BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
BS EN 4700-005:2010 | Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Forging stock |
BS EN ISO 9809-2:2010 | Gas cylinders. Refillable seamless steel gas cylinders. Design, construction and testing Quenched and tempered steel cylinders with tensile strength greater than or equal to 1100 MPa |
DIN EN 10349:2010-02 | Steel castings - Austenitic manganese steel castings |
PREN 14811 : DRAFT 2016 | RAILWAY APPLICATIONS - TRACK - SPECIAL PURPOSE RAIL - GRVED AND ASSOCIATED CONSTRUCTION |
12/30265276 DC : 0 | BS EN 13001-3-3 - CRANES - GENERAL DESIGN - PART 3-3: LIMIT STATES AND PROOF OF COMPETENCE OF WHEEL/RAIL CONTACTS |
13/30261096 DC : 0 | BS EN ISO 17945 - MATERIALS RESISTANT TO SULFIDE STRESS CRACKING IN CORROSIVE PETROLEUM REFINING ENVIRONMENTS |
14/30275471 DC : 0 | BS ISO 18137-1 - LEAF SPRINGS - PART 1: TECHNICAL REQUIREMENTS AND TEST METHODS |
17/30361645 DC : DRAFT SEP 2017 | BS EN ISO 11961 - PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL DRILL PIPE |
BS ISO 11119-4:2016 | Gas cylinders. Refillable composite gas cylinders. Design, construction and testing Fully wrapped fibre reinforced composite gas cylinders up to 150 l with load-sharing welded metallic liners |
06/30143946 DC : 0 | EN 485-1 - ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
BS EN 1562:2012 | Founding. Malleable cast irons |
BS EN ISO 7866:2012 | Gas cylinders. Refillable seamless aluminium alloy gas cylinders. Design, construction and testing |
ISO 16468:2015 | Investment castings (steel, nickel alloys and cobalt alloys) General technical requirements |
06/30148179 DC : DRAFT SEP 2006 | ISO 9809-3 - GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 3: NORMALIZED STEEL CYLINDERS |
12/30251283 DC : 0 | BS ISO 9809-4 - GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 4: STAINLESS STEEL CYLINDERS WITH AN R[M] VALUE OF LESS THAN 1100 MPA |
13/30256266 DC : 0 | BS ISO 683-18 - HEAT-TREATABLE STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 18: BRIGHT STEEL PRODUCTS |
BS EN 15594:2009 | Railway applications. Track. Restoration of rails by electric arc welding |
04/30095196 DC : DRAFT MAY 2004 | EN ISO 6506-2 - METALLIC MATERIALS - BRINELL HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES |
BS EN ISO 3266 : 2010 | FORGED STEEL EYEBOLTS GRADE 4 FOR GENERAL LIFTING PURPOSES (ISO 3266:2010+A1:2015) |
05/30128668 DC : DRAFT FEB 2005 | ISO 7689 - AEROSPACE - BOLTS, WITH MJ THREADS, MADE OF ALLOY STEEL, STRENGTH CLASS 1100 MPA - PROCUREMENT |
API 11D3 : 2008 : R2015 | PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - SURFACE-DRIVE SYSTEMS |
UNI EN 13601 : 2013 | COPPER AND COPPER ALLOYS - COPPER ROD, BAR AND WIRE FOR GENERAL ELECTRICAL PURPOSES |
BIS IS/ISO 9170-1 : 2008 | TERMINAL UNITS FOR MEDICAL GAS PIPELINE SYSTEMS - PART 1: TERMINAL UNITS FOR USE WITH COMPRESSED MEDICAL GASES AND VACUUM |
BS ISO 13628-10 : 2005 AMD 16775 | PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 10: SPECIFICATION FOR BONDED FLEXIBLE PIPE |
BS ISO 6305-2:2007 | Railway components. Technical delivery requirements Non-alloy carbon steel baseplates |
06/30148176 DC : DRAFT SEP 2006 | ISO 9809-2 - GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 2: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH GREATER THAN OR EQUAL TO 1100 MPA |
UNI EN 13605 : 2013 | COPPER AND COPPER ALLOYS - COPPER PROFILES AND PROFILED WIRE FOR ELECTRICAL PURPOSES |
08/30190263 DC : DRAFT SEP 2008 | BS EN ISO 11960 - PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR USE AS CASING OR TUBING FOR WELLS |
BIS IS 5531 : 2014 | CAST IRON SPECIALS FOR ASBESTOS CEMENT PRESSURE PIPES FOR WATER AND SEWAGE - SPECIFICATION |
DIN 7603:2001-05 | Sealing rings |
I.S. EN 13001-3-3:2014 | CRANES - GENERAL DESIGN - PART 3-3: LIMIT STATES AND PROOF OF COMPETENCE OF WHEEL/RAIL CONTACTS |
API SPEC 14L : 2007 | SPECIFICATION FOR LOCK MANDRELS AND LANDING NIPPLES |
I.S. EN 14157:2017 | NATURAL STONE TEST METHODS - DETERMINATION OF THE ABRASION RESISTANCE |
I.S. EN 16771:2016 | RAILWAY APPLICATIONS - INFRASTRUCTURE - ALUMINOTHERMIC WELDING OF GROOVED RAILS |
I.S. CEN TS 15185:2006 | FURNITURE - ASSESSMENT OF THE SURFACE RESISTANCE TO ABRASION |
ISO 9352:2012 | Plastics — Determination of resistance to wear by abrasive wheels |
I.S. EN 754-1:2016 | ALUMINIUM AND ALUMINIUM ALLOYS - COLD DRAWN ROD/BAR AND TUBE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
DIN EN 13310:2015-09 | KITCHEN SINKS - FUNCTIONAL REQUIREMENTS AND TEST METHODS |
ISO 683-18:2014 | Heat-treatable steels, alloy steels and free-cutting steels — Part 18: Bright steel products |
ISO 683-4:2016 | Heat-treatable steels, alloy steels and free-cutting steels Part 4: Free-cutting steels |
I.S. EN 16725:2016 | RAILWAY APPLICATIONS - TRACK - RESTORATION AND REPAIR OF MANGANESE CROSSINGS |
I.S. EN 1563:2011 | FOUNDING - SPHEROIDAL GRAPHITE CAST IRONS |
BS EN 14917 : 2009 | METAL BELLOWS EXPANSION JOINTS FOR PRESSURE APPLICATIONS |
I.S. EN ISO 9809-2:2010 | GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 2: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH GREATER THAN OR EQUAL TO 1100 MPA |
I.S. EN ISO 17078-4:2010 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 4: PRACTICES FOR SIDE-POCKET MANDRELS AND RELATED EQUIPMENT |
ISO 22034-1:2007 | Steel wire and wire products — Part 1: General test methods |
EN 14917:2009+A1:2012 | Metal bellows expansion joints for pressure applications |
ISO 683-5:2017 | Heat treatable steels, alloy steels and free-cutting steels — Part 5: Nitriding steels |
17/30359541 DC : 0 | BS EN 12797 - BRAZING - DESTRUCTIVE TESTS OF BRAZED JOINTS |
18/30365854 DC : 0 | BS EN 1337-6 - STRUCTURAL BEARINGS - PART 6: ROCKER BEARINGS |
15/30322070 DC : 0 | BS EN 1563 - FOUNDING - SPHEROIDAL GRAPHITE CAST IRONS |
I.S. EN 4700-007:2010 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 007: REMELTING STOCK |
ISO 16220:2017 | Magnesium and magnesium alloys — Magnesium alloy ingots and castings |
ASTM F 3213 : 2017 | Standard for Additive Manufacturing – Finished Part Properties – Standard Specification for Cobalt-28 Chromium-6 Molybdenum via Powder Bed Fusion |
UNE-EN ISO 6506-2:2015 | Metallic materials - Brinell hardness test - Part 2: Verification and calibration of testing machines (ISO 6506-2:2014) |
NF EN ISO 3266 : 2010 AMD 1 2016 | FORGED STEEL EYEBOLTS GRADE 4 FOR GENERAL LIFTING PURPOSES |
I.S. EN 10088-5:2009 | STAINLESS STEELS - PART 5: TECHNICAL DELIVERY CONDITIONS FOR BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR CONSTRUCTION PURPOSES |
UNI EN ISO 11960 : 2014 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR USE AS CASING OR TUBING FOR WELLS |
API 14L CHINESE : 2007 | SPECIFICATION FOR LOCK MANDRELS AND LANDING NIPPLES |
EN 12167:2016 | COPPER AND COPPER ALLOYS - PROFILES AND BARS FOR GENERAL PURPOSES |
EN 545:2010 | Ductile iron pipes, fittings, accessories and their joints for water pipelines - Requirements and test methods |
EN 12165:2016 | COPPER AND COPPER ALLOYS - WROUGHT AND UNWROUGHT FORGING STOCK |
DIN EN 13605:2013-09 | Copper and copper alloys - Copper profiles and profiled wire for electrical purposes |
DIN EN 13262:2011-06 | RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - WHEELS - PRODUCT REQUIREMENTS |
DIN EN ISO 15156-2:2015-12 | PETROLEUM AND NATURAL GAS INDUSTRIES - MATERIALS FOR USE IN H[2]S-CONTAINING ENVIRONMENTS IN OIL AND GAS PRODUCTION - PART 2: CRACKING-RESISTANT CARBON AND LOW-ALLOY STEELS, AND THE USE OF CAST IRONS (ISO 15156-2:2015) |
DIN EN ISO 5470-1:2015-04 (Draft) | RUBBER- OR PLASTICS-COATED FABRICS - DETERMINATION OF ABRASION RESISTANCE - PART 1: TABER ABRADER (ISO 5470-1:2016) |
DIN EN 1982:2016-01 (Draft) | COPPER AND COPPER ALLOYS - INGOTS AND CASTINGS |
DIN EN 13748-2:2005-03 | Terrazzo tiles - Part 2: Terrazzo tiles for external use; German version EN 13748-2:2004 |
DIN EN ISO 11120:2015-05 | GAS CYLINDERS - REFILLABLE SEAMLESS STEEL TUBES OF WATER CAPACITY BETWEEN 150 L AND 3000 L - DESIGN, CONSTRUCTION AND TESTING (ISO 11120:2015) |
DIN EN 10208-1:2009-07 | STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 1: PIPES OF REQUIREMENT CLASS A |
DIN EN 13604:2013-09 | Copper and copper alloys - Semiconductor devices, electronic and vacuum products made from high conductivity copper |
DIN EN 14359 E : 2017 | GAS-LOADED ACCUMULATORS FOR FLUID POWER APPLICATIONS |
BS EN 14525:2004 | Ductile iron wide tolerance couplings and flange adaptors for use with pipes of different materials: ductile iron, grey iron, steel, PVC-U, PE, fibre-cement |
BS EN ISO 13628-2:2006 | Petroleum and natural gas industries. Design and operation of subsea production systems Unbonded flexible pipe systems for subsea and marine applications |
BS EN 13600:2013 | Copper and copper alloys. Seamless copper tubes for electrical purposes |
BS EN ISO 14310:2008 | Petroleum and natural gas industries. Downhole equipment. Packers and bridge plugs |
BS EN 14200:2004 | Railway applications. Suspension components. Parabolic springs, steel |
UNE-EN ISO 898-1:2015 | Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread (ISO 898-1:2013) |
EN 1706:2010 | Aluminium and aluminium alloys - Castings - Chemical composition and mechanical properties |
BS EN 13835:2012 | Founding. Austenitic cast irons |
UNE-EN 10272:2016 | Stainless steel bars for pressure purposes |
UNE-EN 1559-1:2011 | Founding - Technical conditions of delivery - Part 1: General |
BS EN 754-1:2016 | Aluminium and aluminium alloys. Cold drawn rod/bar and tube Technical conditions for inspection and delivery |
UNE-EN 1706:2011 | Aluminium and aluminium alloys - Castings - Chemical composition and mechanical properties |
BS EN ISO 11960:2014 | Petroleum and natural gas industries. Steel pipes for use as casing or tubing for wells |
BS EN 303-5:2012 | Heating boilers Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW. Terminology, requirements, testing and marking |
BS EN 1338:2003 | Concrete paving blocks. Requirements and test methods |
UNE-EN 12513:2011 | Founding - Abrasion resistant cast irons |
BS EN 10272:2007 | Stainless steel bars for pressure purposes |
BS EN ISO 3506-3:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners Set screws and similar fasteners not under tensile stress |
ISO 3506-2:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners Part 2: Nuts |
BS EN 14730-1:2017 | Railway applications. Track. Aluminothermic welding of rails Approval of welding processes |
BS EN 14616:2004 | Thermal spraying. Recommendations for thermal spraying |
BS EN 12420:2014 | Copper and copper alloys. Forgings |
BS EN 1559-1:2011 | Founding. Technical conditions of delivery General |
BS EN 14772:2005 | Flanges and their joints. Quality assurance inspection and testing of gaskets in accordance with the series of standards EN 1514 and EN 12560 |
I.S. EN 10084:2008 | CASE HARDENING STEELS - TECHNICAL DELIVERY CONDITIONS |
I.S. EN 13601:2013 | COPPER AND COPPER ALLOYS - COPPER ROD, BAR AND WIRE FOR GENERAL ELECTRICAL PURPOSES |
DIN EN 1562:2012-05 | FOUNDING - MALLEABLE CAST IRONS |
I.S. EN 459-2:2010 | BUILDING LIME - PART 2: TEST METHODS |
UNI EN ISO 9170-1 : 2008 | TERMINAL UNITS FOR MEDICAL GAS PIPELINE SYSTEMS - PART 1: TERMINAL UNITS FOR USE WITH COMPRESSED MEDICAL GASES AND VACUUM |
I.S. EN 10218-1:2012 | STEEL WIRE AND WIRE PRODUCTS - GENERAL - PART 1: TEST METHODS |
EN 13230-3:2016 | Railway applications - Track - Concrete sleepers and bearers - Part 3: Twin-block reinforced sleepers |
EN ISO 19054:2006/A1:2016 | RAIL SYSTEMS FOR SUPPORTING MEDICAL EQUIPMENT (ISO 19054:2005/AMD 1:2016) |
EN 10297-1:2003 | Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 1: Non-alloy and alloy steel tubes |
EN 13001-3-3:2014 | Cranes - General design - Part 3-3: Limit states and proof of competence of wheel/rail contacts |
EN 10277-1:2008 | Bright steel products - Technical delivery conditions - Part 1: General |
EN 10331:2003 | Magnetic materials - Specification for sintered soft magnetic materials |
EN 10088-2:2014 | STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
CEN/TS 15718:2011 | Railway applications - Wheelsets and bogies - Product requirements for cast wheels |
EN 10088-3:2014 | Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes |
CEN/TS 15185 : 2005 | FURNITURE - ASSESSMENT OF THE SURFACE RESISTANCE TO ABRASION |
DIN EN 10218-1:2012-03 | STEEL WIRE AND WIRE PRODUCTS - GENERAL - PART 1: TEST METHODS |
EN 10088-4:2009 | Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes |
DIN EN 14616:2005-02 | THERMAL SPRAYING - RECOMMENDATIONS FOR THERMAL SPRAYING |
EN 10272:2016 | Stainless steel bars for pressure purposes |
EN 10269:2013 | Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties |
DIN EN 13001-3-3:2015-02 | CRANES - GENERAL DESIGN - PART 3-3: LIMIT STATES AND PROOF OF COMPETENCE OF WHEEL/RAIL CONTACTS |
EN 10208-1:2009 | Steel pipes for pipelines for combustible fluids - Technical delivery condi-tions - Part 1: Pipes of requirement class A |
EN ISO 11439:2013 | Gas cylinders - High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles (ISO 11439:2013) |
EN 13322-2:2003/A1:2006 | TRANSPORTABLE GAS CYLINDERS - REFILLABLE WELDED STEEL GAS CYLINDERS - DESIGN AND CONSTRUCTION - PART 2: STAINLESS STEEL |
DIN ISO 4498:2005-11 | SINTERED METAL MATERIALS, EXCLUDING HARDMETALS - DETERMINATION OF APPARENT HARDNESS AND MICROHARDNESS |
DIN EN ISO 5470-1:2017-04 | RUBBER- OR PLASTICS-COATED FABRICS - DETERMINATION OF ABRASION RESISTANCE - PART 1: TABER ABRADER (ISO 5470-1:2016) |
EN ISO 9015-1:2011 | Destructive tests on welds in metallic materials - Hardness testing - Part 1: Hardness test on arc welded joints (ISO 9015-1:2001) |
ONORM EN 14917 : 2012 | METAL BELLOWS EXPANSION JOINTS FOR PRESSURE APPLICATIONS |
EN 1337-4:2004/AC:2007 | STRUCTURAL BEARINGS - PART 4: ROLLER BEARINGS |
EN 1337-6:2004 | Structural bearings - Part 6: Rocker bearings |
EN 10218-1:2012 | Steel wire and wire products - General - Part 1: Test methods |
EN 12513:2011 | Founding - Abrasion resistant cast irons |
EN 1338:2003/AC:2006 | CONCRETE PAVING BLOCKS - REQUIREMENTS AND TEST METHODS |
EN 12392:2016 | Aluminium and aluminium alloys - Wrought products and cast products - Special requirements for products intended for the production of pressure equipment |
EN 10083-2:2006 | Steels for quenching and tempering - Part 2: Technical delivery conditions for non alloy steels |
EN 15185:2011 | Furniture - Assessment of the surface resistance to abrasion |
ONORM EN ISO 898-2 : 2012 | MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 2: NUTS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD (ISO 898-2:2012) |
EN 13600:2013 | Copper and copper alloys - Seamless copper tubes for electrical purposes |
UNI EN 16482 : 2014 | FOUNDING - CONTINUOUS CAST IRON BARS |
UNE-EN 13674-4:2007 | Railway applications - Track - Rail - Part 4: Vignole railway rails from 27 kg/m to, but excluding 46 kg/m |
16/30314880 DC : 0 | BS EN ISO 9170-1 - TERMINAL UNITS FOR MEDICAL GAS PIPELINE SYSTEMS - PART 1: TERMINAL UNITS FOR USE WITH COMPRESSED MEDICAL GASES AND VACUUM |
BS EN 16451:2015 | Railway applications. Braking. Brake pad holder |
API SPEC 11D1 : 2015 | PACKERS AND BRIDGE PLUGS |
DIN ISO 4384-1:2014-07 | Plain bearings - Hardness testing of bearing metals - Part 1: Multilayer bearings materials (ISO 4384-1:2012) |
10/30196141 DC : 0 | BS ISO 11119-3 - GAS CYLINDERS OF COMPOSITE CONSTRUCTION - SPECIFICATION AND TEST METHODS - PART 3: FULLY WRAPPED FIBRE REINFORCED COMPOSITE GAS CYLINDERS AND TUBES WITH NON-METALLIC AND NON-LOAD SHARING METAL LINERS |
DIN EN 14917:2012-06 | Metal bellows expansion joints for pressure applications (includes Amendment A1:2012) |
BS EN ISO 9809-1:2010 | Gas cylinders. Refillable seamless steel gas cylinders. Design, construction and testing Quenched and tempered steel cylinders with tensile strength less than 1100 MPa |
11/30230618 DC : 0 | BS ISO 683-2 - HEAT-TREATABLE STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 2: ALLOY STEELS FOR QUENCHING AND TEMPERING |
BS EN 4700-006:2010 | Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Pre-production and production forgings |
UNE-EN 61439-5:2015 | Low-voltage switchgear and controlgear assemblies - Part 5: Assemblies for power distribution in public networks |
I.S. EN ISO 9809-1:2010 | GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 1: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH LESS THAN 1100 MPA |
14/30285793 DC : 0 | BS EN 16771 - RAILWAY APPLICATIONS - INFRASTRUCTURE - ALUMINOTHERMIC WELDING OF GROOVED RAILS |
05/30131069 DC : DRAFT MAR 2005 | EN 598:2005 - DUCTILE IRON PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS FOR SEWERAGE APPLICATIONS - REQUIREMENTS AND TEST METHODS |
ISO 17918:2015 | Corrosion of metals and alloys Evaluation of selective corrosion of Cu alloys and grey cast iron for power plant components by visual inspection and hardness measurement |
I.S. EN 10208-2:2009 | STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 2: PIPES OF REQUIREMENT CLASS B |
DIN EN ISO 3266:2016-05 | FORGED STEEL EYEBOLTS GRADE 4 FOR GENERAL LIFTING PURPOSES (ISO 3266:2010 + AMD 1:2015) |
DIN EN 16273:2015-03 | Railway applications - Track - Forged rail transitions |
UNI EN ISO 9809-3 : 2010 | GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 3: NORMALIZED STEEL CYLINDERS |
13/30274822 DC : 0 | BS ISO 11119-4 - GAS CYLINDERS - REFILLABLE COMPOSITE GAS CYLINDERS AND TUBES - DESIGN, CONSTRUCTION AND TESTING - PART 4: FULLY WRAPPED FIBRE REINFORCED COMPOSITE GAS CYLINDERS AND TUBES UP TO 450 L WITH LOAD-SHARING WELDED METALLIC LINERS |
DIN EN 10253-2:2008-09 | Butt-welding pipe fittings - Part 2: Non alloy and ferritic alloy steels with specific inspection requirements |
04/30095200 DC : DRAFT MAY 2004 | EN ISO 6506-3 - METALLIC MATERIALS. BRINELL HARDNESS TEST - PART 3: CALIBRATION OF REFERENCE BLOCKS |
BS EN 10349:2009 | Steel castings. Austenitic manganese steel castings |
I.S. EN 15566:2016 | RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - DRAW GEAR AND SCREW COUPLING |
DIN EN 16451:2015-09 | RAILWAY APPLICATIONS - BRAKING - BRAKE PAD HOLDER |
API 64 : 2017-08 | DIVERTER EQUIPMENT SYSTEMS |
UNE-EN 13001-3-3:2015 | Cranes - General design - Part 3-3: Limit states and proof of competence of wheel/rail contacts |
UNI EN 13674-4 : 2010 | RAILWAY APPLICATIONS - TRACK - RAIL - PART 4: VIGNOLE RAILWAY RAILS FROM 27 KG/M TO, BUT EXCLUDING 46 KG/M |
BS EN 13674-2 : 2006 | RAILWAY APPLICATIONS - TRACK - RAIL - PART 2: SWITCH AND CROSSING RAILS USED IN CONJUNCTION WITH VIGNOLE RAILWAY RAILS 46 KG/M AND ABOVE |
UNI EN 1562 : 2012 | FOUNDING - MALLEABLE CAST IRONS |
13/30252100 DC : 0 | BS ISO 4990 - STEEL CASTINGS - GENERAL TECHNICAL DELIVERY REQUIREMENTS |
11/30238890 DC : 0 | BS EN ISO 14998 - PETROLEUM AND NATURAL GAS INDUSTRIES - DOWN HOLE EQUIPMENT - COMPLETION ACCESSORIES |
04/30094343 DC : DRAFT NOV 2004 | ISO 21988 - ABRASION RESISTANT CAST IRONS - CLASSIFICATION |
I.S. EN ISO 9809-3:2010 | GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 3: NORMALIZED STEEL CYLINDERS |
02/713148 DC : DRAFT NOV 2002 | BS ISO 16143-2 - STAINLESS STEELS FOR GENERAL PURPOSES - PART 2: SEMI-FINISHED PRODUCTS, BARS, RODS AND SECTIONS |
DIN EN 16482:2014-09 | FOUNDING - CONTINUOUS CAST IRON BARS |
PREN 12513 : DRAFT 2009 | FOUNDING - ABRASION RESISTANT CAST IRONS |
DIN EN 15594:2009-08 | RAILWAY APPLICATIONS - TRACK - RESTORATION OF RAILS BY ELECTRIC ARC WELDING |
ISO 20703:2006 | Gas cylinders Refillable welded aluminium-alloy cylinders Design, construction and testing |
11/30253751 DC : 0 | BS EN 10269 - STEELS AND NICKEL ALLOYS FOR FASTENERS WITH SPECIFIED ELEVATED AND/OR LOW TEMPERATURE PROPERTIES |
BS ISO 4384-1:2012 | Plain bearings. Hardness testing of bearing metals Multilayer bearings materials |
BS EN 14157:2017 | Natural stone test methods. Determination of the abrasion resistance |
EN 4700-002:2016 | Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 002: Bar and section |
NF EN ISO 9809-1 : 2010 | GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 1: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH LESS THAN 1100 MPA |
BS EN 14811 : 2006 | RAILWAY APPLICATIONS - TRACK - SPECIAL PURPOSE RAIL - GROOVED AND ASSOCIATED CONSTRUCTION |
UNI EN ISO 9809-1 : 2010 | GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 1: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH LESS THAN 1100 MPA |
BS EN 16602-70-46:2014 | Space product assurance. Requirements for manufacturing and procurement of threaded fasteners |
DD CEN/TS 15185:2005 | Furniture. Assessment of the surface resistance to abrasion |
10/30216654 DC : 0 | BS EN 12842 - DUCTILE IRON FITTINGS FOR PVC-U OR PE PIPING SYSTEMS - REQUIREMENTS AND TEST METHODS |
ISO 15461:2018 | Steel forgings — Testing frequency, sampling conditions and test methods for mechanical tests |
PREN 10088-2 : DRAFT 2011 | STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
12/30246071 DC : 0 | BS ISO 15787 - TECHNICAL PRODUCT DOCUMENTATION - HEAT-TREATED FERROUS PARTS - PRESENTATION AND INDICATIONS |
13/30252136 DC : 0 | BS ISO 16468 - INVESTMENT CASTINGS (STEEL, NICKEL ALLOYS AND COBALT ALLOYS) - GENERAL TECHNICAL REQUIREMENTS |
DD ISO/TS 15869:2009 | Gaseous hydrogen and hydrogen blends. Land vehicle fuel tanks |
BS ISO 404:2013 | Steel and steel products. General technical delivery requirements |
DIN EN ISO 7866:2013-01 | Gas cylinders - Refillable seamless aluminium alloy gas cylinders - Design, construction and testing (ISO 7866:2012) |
15/30312459 DC : 0 | BS EN ISO 5182 - RESISTANCE WELDING - MATERIALS FOR ELECTRODES AND ANCILLARY EQUIPMENT |
05/30129363 DC : DRAFT AUG 2005 | ISO 9170-1 - TERMINAL UNITS FOR MEDICAL GAS PIPELINE SYSTEMS - PART 1: TERMINAL UNITS FOR USE WITH COMPRESSED MEDICAL GASES AND VACUUM |
UNI EN 15185 : 2011 | FURNITURE - ASSESSMENT OF THE SURFACE RESISTANCE TO ABRASION |
DD CEN/TS 15718:2011 | Railway applications. Wheelsets and bogies. Product requirements for cast wheels |
API 11D1 REDLINE : 2009 | PACKERS AND BRIDGE PLUGS |
06/30136240 DC : 0 | EN 12020-1 - ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED PRECISION PROFILES IN ALLOYS EN AW-6060 AND EN AW-6063 - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
UNE-EN ISO 9015-1:2011 | Destructive tests on welds in metallic materials - Hardness testing - Part 1: Hardness test on arc welded joints (ISO 9015-1:2001) |
05/30132585 DC : DRAFT APR 2005 | EN 10083-1 - STEELS FOR QUENCHING AND TEMPERING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
BS ISO 4498:2005 | Sintered metal materials, excluding hardmetals. Determination of apparent hardness and microhardness |
12/30250146 DC : 0 | BS ISO 16143-1 - STAINLESS STEELS FOR GENERAL PURPOSES - PART 1: FLAT PRODUCTS |
BS ISO 16220:2017 | Magnesium and magnesium alloys. Magnesium alloy ingots and castings |
BS EN ISO 17078-3:2009 | Petroleum and natural gas industries. Drilling and production equipment Running tools, pulling tools and kick-over tools and latches for side-pocket mandrels |
API SPEC 16F : 2017 | SPECIFICATION FOR MARINE DRILLING RISER EQUIPMENT |
ISO 4384-1:2012 | Plain bearings Hardness testing of bearing metals Part 1: Multilayer bearings materials |
UNE-EN 14688:2016 | Sanitary appliances - Wash basins - Functional requirements and test methods |
ISO 15787:2016 | Technical product documentation Heat-treated ferrous parts Presentation and indications |
ISO 11119-3:2013 | Gas cylinders Refillable composite gas cylinders and tubes Design, construction and testing Part 3: Fully wrapped fibre reinforced composite gas cylinders and tubes up to 450L with non-load-sharing metallic or non-metallic liners |
API 7-1:2006 | SPECIFICATION FOR ROTARY DRILL STEM ELEMENTS |
BS EN ISO 11961:2008 | Petroleum and natural gas industries. Steel drill pipe |
I.S. EN ISO 12679:2015 | THERMAL SPRAYING - RECOMMENDATIONS FOR THERMAL SPRAYING (ISO 12679:2011) |
UNE-EN 16668:2016 | Industrial valves - Requirements and testing for metallic valves as pressure accessories |
I.S. EN 12449:2016 | COPPER AND COPPER ALLOYS - SEAMLESS, ROUND TUBES FOR GENERAL PURPOSES |
ISO 1083:2004 | Spheroidal graphite cast irons - Classification |
I.S. EN 16124:2011 | FOUNDING - LOW-ALLOYED FERRITIC SPHEROIDAL GRAPHITE CAST IRONS FOR ELEVATED TEMPERATURE APPLICATIONS |
I.S. EN ISO 14998:2013 | PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - COMPLETION ACCESSORIES (ISO 14998:2013) |
ISO 18172-2:2007 | Gas cylinders Refillable welded stainless steel cylinders Part 2: Test pressure greater than 6 MPa |
ISO 14661:2000 | Thermal turbines for industrial applications (steam turbines, gas expansion turbines) General requirements |
ISO 683-1:2016 | Heat-treatable steels, alloy steels and free-cutting steels Part 1: Non-alloy steels for quenching and tempering |
ONORM EN ISO 11961 : 2010 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL DRILL PIPE |
PREN 10272 : DRAFT 2013 | STAINLESS STEEL BARS FOR PRESSURE PURPOSES |
PREN ISO 683-17 : DRAFT 2013 | HEAT-TREATED STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 17: BALL AND ROLLER BEARING STEELS (ISO/DIS 683-17:2013) |
EN 10253-2:2007 | Butt-welding pipe fittings - Part 2: Non alloy and ferritic alloy steels with specific inspection requirements |
EN ISO 11961:2008/AC:2009 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL DRILL PIPE |
ISO 18137:2015 | Leaf springs Technical specifications |
PREN 12797 : DRAFT 2017 | BRAZING - DESTRUCTIVE TESTS OF BRAZED JOINTS |
I.S. EN 61439-5:2015 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 5: ASSEMBLIES FOR POWER DISTRIBUTION IN PUBLIC NETWORKS |
BS EN 12449:2016 | Copper and copper alloys. Seamless, round tubes for general purposes |
I.S. EN 16079:2011 | FOUNDING - COMPACTED (VERMICULAR) GRAPHITE CAST IRONS |
ISO 11119-2:2012 | Gas cylinders Refillable composite gas cylinders and tubes Design, construction and testing Part 2: Fully wrapped fibre reinforced composite gas cylinders and tubes up to 450 l with load-sharing metal liners |
UNI EN 1563 : 2012 | FOUNDING - SPHEROIDAL GRAPHITE CAST IRONS |
I.S. EN ISO 9015-1:2011 | DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS - HARDNESS TESTING - PART 1: HARDNESS TEST ON ARC WELDED JOINTS |
EN 1563:2011 | Founding - Spheroidal graphite cast irons |
BS EN 13674-4 : 2006 | RAILWAY APPLICATIONS - TRACK - RAIL - PART 4: VIGNOLE RAILWAY RAILS FROM 27 KG/M TO, BUT EXCLUDING 46 KG/M |
UNE-EN 16273:2015 | Railway applications - Track - Forged rail transitions |
API 19G1 : 2010 | SIDE-POCKET MANDRELS |
ASTM F 3056 : 2014 | Standard Specification for Additive Manufacturing Nickel Alloy (UNS N06625) with Powder Bed Fusion |
ASTM F 2924 : 2014 : REDLINE | Standard Specification for Additive Manufacturing Titanium-6 Aluminum-4 Vanadium with Powder Bed Fusion |
PREN 1337-6 : DRAFT 2018 | STRUCTURAL BEARINGS - PART 6: ROCKER BEARINGS |
BS EN ISO 6506-2:2014 | Metallic materials. Brinell hardness test Verification and calibration of testing machines |
NF EN ISO 17078-3 : 2010 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 3: RUNNING TOOLS, PULLING TOOLS AND KICK-OVER TOOLS AND LATCHES FOR SIDE-POCKET MANDRELS |
UNI EN 16124 : 2012 | FOUNDING - LOW-ALLOYED FERRITIC SPHEROIDAL GRAPHITE CAST IRONS FOR ELEVATED TEMPERATURE APPLICATIONS |
ASTM F 3056 : 2014 : EDT 1 | Standard Specification for Additive Manufacturing Nickel Alloy (UNS N06625) with Powder Bed Fusion |
UNE-EN 10088-4:2010 | Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes |
UNI EN 4700-007 : 2011 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 007: REMELTING STOCK |
I.S. EN 4700-006:2010 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 006: PRE-PRODUCTION AND PRODUCTION FORGINGS |
UNI EN ISO 17078-3 : 2009 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 3: RUNNING TOOLS, PULLING TOOLS AND KICK-OVER TOOLS AND LATCHES FOR SIDE-POCKET MANDRELS |
ASTM F 3055 : 2014 | Standard Specification for Additive Manufacturing Nickel Alloy (UNS N07718) with Powder Bed Fusion |
ASTM F 3055 : 2014 : EDT 1 | Standard Specification for Additive Manufacturing Nickel Alloy (UNS N07718) with Powder Bed Fusion |
EN 10083-1:2006 | Steels for quenching and tempering - Part 1: General technical delivery conditions |
I.S. EN 14811:2006 | RAILWAY APPLICATIONS - TRACK - SPECIAL PURPOSE RAIL - GROOVED AND ASSOCIATED CONSTRUCTION |
EN 12164:2016 | Copper and copper alloys - Rod for free machining purposes |
EN ISO 6506-3:2014 | Metallic materials - Brinell hardness test - Part 3: Calibration of reference blocks (ISO 6506-3:2014) |
I.S. EN 1562:2012 | FOUNDING - MALLEABLE CAST IRONS |
I.S. EN 10253-2:2007 | BUTT-WELDING PIPE FITTINGS - PART 2: NON ALLOY AND FERRITIC ALLOY STEELS WITH SPECIFIC INSPECTION REQUIREMENTS |
EN 1982:2017 | Copper and copper alloys - Ingots and castings |
EN 12168:2016 | Copper and copper alloys - Hollow rod for free machining purposes |
DIN EN ISO 3506-3:2010-04 | Mechanical properties of corrosion-resistant stainless steel fasteners - Part 3: Set screws and similar fasteners not under tensile stress (ISO 3506-3:2009) |
DIN EN 14730-1:2014-05 (Draft) | RAILWAY APPLICATIONS - TRACK - ALUMINOTHERMIC WELDING OF RAILS - PART 1: APPROVAL OF WELDING PROCESSES |
DIN EN 755-1:2016-10 | ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED ROD/BAR, TUBE AND PROFILES - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
DIN EN 12842:2012-11 | Ductile iron fittings for PVC-U or PE piping systems - Requirements and test methods |
DIN EN 1559-1:2011-05 | Founding - Technical conditions of delivery - Part 1: General |
DIN EN ISO 898-1:2013-05 | MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 1: BOLTS, SCREWS AND STUDS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD (ISO 898-1:2013) |
DIN EN 12167:2015-12 (Draft) | COPPER AND COPPER ALLOYS - PROFILES AND BARS FOR GENERAL PURPOSES |
DIN EN 14772 E : 2005 | FLANGES AND THEIR JOINTS - QUALITY ASSURANCE INSPECTION AND TESTING OF GASKETS IN ACCORDANCE WITH THE EN 1514 AND EN 12560 SERIES OF STANDARDS |
DIN EN 598:2009-10 | Ductile iron pipes, fittings, accessories and their joints for sewerage applications - Requirements and test methods (includes Amendment A1:2009) |
DIN EN 12168:2015-12 (Draft) | COPPER AND COPPER ALLOYS - HOLLOW ROD FOR FREE MACHINING PURPOSES |
DIN EN 303-5:2012-10 | Heating boilers - Part 5: Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW - Terminology, requirements, testing and marking |
DIN EN 10269:2014-02 | STEELS AND NICKEL ALLOYS FOR FASTENERS WITH SPECIFIED ELEVATED AND/OR LOW TEMPERATURE PROPERTIES |
DIN EN 12165:2015-12 (Draft) | COPPER AND COPPER ALLOYS - WROUGHT AND UNWROUGHT FORGING STOCK |
DIN EN ISO 4498:2010-11 | Sintered metal materials, excluding hardmetals - Determination of apparent hardness and microhardness (ISO 4498:2010) |
DIN EN 1337-6:2004-08 | Structural bearings - Part 6: Rocker bearings |
DIN EN 14354:2005-03 | WOOD-BASED PANELS - WOOD VENEER FLOOR COVERINGS |
DIN EN 10297-1:2003-06 | SEAMLESS CIRCULAR STEEL TUBES FOR MECHANICAL AND GENERAL ENGINEERING PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: NON-ALLOY AND ALLOY STEEL TUBES |
DIN EN 14688 E : 2015 | SANITARY APPLIANCES - WASH BASINS - FUNCTIONAL REQUIREMENTS AND TEST METHODS |
DIN EN 12163:2015-12 (Draft) | COPPER AND COPPER ALLOYS - ROD FOR GENERAL PURPOSES |
DIN EN 12164:2015-12 (Draft) | COPPER AND COPPER ALLOYS - ROD FOR FREE MACHINING PURPOSES |
DIN EN ISO 898-5:2012-09 | Mechanical properties of fasteners made of carbon steel and alloy steel - Part 5: Set screws and similar threaded fasteners with specified hardness classes - Coarse thread and fine pitch thread (ISO 898-5:2012) |
DIN EN 14359:2011-04 | GAS-LOADED ACCUMULATORS FOR FLUID POWER APPLICATIONS |
BS EN ISO 3506-1:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners Bolts, screws and studs |
BS EN 598 : 2007 | DUCTILE IRON PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS FOR SEWERAGE APPLICATIONS - REQUIREMENTS AND TEST METHODS |
BS EN 12163:2011 | Copper and copper alloys. Rod for general purposes |
UNE-EN 545:2011 | Ductile iron pipes, fittings, accessories and their joints for water pipelines - Requirements and test methods |
BS EN ISO 3506-2:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners Nuts |
ISO 11960:2014 | Petroleum and natural gas industries Steel pipes for use as casing or tubing for wells |
ISO 18265:2013 | Metallic materials — Conversion of hardness values |
BS EN 13748-1 : 2004 | TERRAZZO TILES - PART 1: TERRAZZO TILES FOR INTERNAL US |
BS EN 438-2 : 2016 | HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 2: DETERMINATION OF PROPERTIES |
UNE-EN ISO 11120:2015 | Gas cylinders - Refillable seamless steel tubes of water capacity between 150 l and 3000 l - Design, construction and testing (ISO 11120:2015) |
BS EN 13322-2:2003 | Transportable gas cylinders. Refillable welded steel gas cylinders. Design and construction Stainless steel |
ONORM EN 1706 : 2013 | ALUMINIUM AND ALUMINIUM ALLOYS - CASTINGS - CHEMICAL COMPOSITION AND MECHANICAL PROPERTIES |
DIN EN 1559-2:2014-12 | FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 2: ADDITIONAL REQUIREMENTS FOR STEEL CASTINGS |
I.S. EN 485-1:2016 | ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
I.S. EN 13600:2013 | COPPER AND COPPER ALLOYS - SEAMLESS COPPER TUBES FOR ELECTRICAL PURPOSES |
I.S. EN ISO 11120:2015 | GAS CYLINDERS - REFILLABLE SEAMLESS STEEL TUBES OF WATER CAPACITY BETWEEN 150 L AND 3000 L - DESIGN, CONSTRUCTION AND TESTING (ISO 11120:2015) |
I.S. EN 13674-3:2006 | RAILWAY APPLICATIONS - TRACK - RAIL - PART 3: CHECK RAILS |
I.S. EN ISO 13628-2:2006 | PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 2: UNBONDED FLEXIBLE PIPE SYSTEMS FOR SUBSEA AND MARINE APPLICATIONS |
DIN EN 12513:2011-05 | Founding - Abrasion resistant cast irons |
I.S. EN ISO 5470-1:2016 | RUBBER- OR PLASTICS-COATED FABRICS - DETERMINATION OF ABRASION RESISTANCE - PART 1: TABER ABRADER (ISO 5470-1:2016) |
I.S. EN 598:2007 | DUCTILE IRON PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS FOR SEWERAGE APPLICATIONS - REQUIREMENTS AND TEST METHODS |
I.S. EN 12842:2012 | DUCTILE IRON FITTINGS FOR PVC-U OR PE PIPING SYSTEMS - REQUIREMENTS AND TEST METHODS |
I.S. EN 969:2009 | DUCTILE IRON PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS FOR GAS PIPELINES - REQUIREMENTS AND TEST METHODS |
ONORM EN 13262 : 2012 | RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - WHEELS - PRODUCT REQUIREMENTS |
I.S. EN 570:2007 | ALUMINIUM AND ALUMINIUM ALLOYS - IMPACT EXTRUSION SLUGS OBTAINED FROM WROUGHT PRODUCTS - SPECIFICATIONS |
DIN EN 10208-2:2009-07 | STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 2: PIPES OF REQUIREMENT CLASS B |
EN 14772:2005 | Flanges and their joints - Quality assurance inspection and testing of gaskets in accordance with the series of standards EN 1514 and EN 12560 |
I.S. EN 1982:2017 | COPPER AND COPPER ALLOYS - INGOTS AND CASTINGS |
I.S. EN ISO 15156-2:2015&LC:2015 | PETROLEUM AND NATURAL GAS INDUSTRIES - MATERIALS FOR USE IN H[2]S-CONTAINING ENVIRONMENTS IN OIL AND GAS PRODUCTION - PART 2: CRACKING-RESISTANT CARBON AND LOW-ALLOY STEELS, AND THE USE OF CAST IRONS (ISO 15156-2:2015) |
DIN EN 13674-1:2011-04 | RAILWAY APPLICATIONS - TRACK - RAIL - PART 1: VIGNOLE RAILWAY RAILS 46 KG/M AND ABOVE |
DIN EN 13674-1:2017-07 | RAILWAY APPLICATIONS - TRACK - RAIL - PART 1: VIGNOLE RAILWAY RAILS 46 KG/M AND ABOVE |
I.S. EN 10088-2:2014 | STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
EN ISO 7866:2012/AC:2014 | GAS CYLINDERS - REFILLABLE SEAMLESS ALUMINIUM ALLOY GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING (ISO 7866:2012/COR 1:2014) |
I.S. EN 12167:2016 | COPPER AND COPPER ALLOYS - PROFILES AND BARS FOR GENERAL PURPOSES |
DIN EN 12420:1999-03 | COPPER AND COPPER ALLOYS - FORGINGS |
I.S. EN 13835:2012 | FOUNDING - AUSTENITIC CAST IRONS |
I.S. EN 13605:2013 | COPPER AND COPPER ALLOYS - COPPER PROFILES AND PROFILED WIRE FOR ELECTRICAL PURPOSES |
DIN EN 10208-1:1998-02 | STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 1: PIPES OF REQUIREMENT CLASS A |
DIN EN 10088-2:2014-12 | STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
EN ISO 15156-2:2015 | Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 2: Cracking-resistant carbon and low alloy steels, and the use of cast irons (ISO 15156-2:2015) |
I.S. EN ISO 18265:2013 | METALLIC MATERIALS - CONVERSION OF HARDNESS VALUES (ISO 18265:2013) |
I.S. EN 12168:2016 | COPPER AND COPPER ALLOYS - HOLLOW ROD FOR FREE MACHINING PURPOSES |
DIN EN ISO 6506-3:2015-02 | METALLIC MATERIALS - BRINELL HARDNESS TEST - PART 3: CALIBRATION OF REFERENCE BLOCKS (ISO 6506-3:2014) |
I.S. EN 14354:2017 | WOOD-BASED PANELS - WOOD VENEER FLOOR COVERINGS |
I.S. EN 1559-1:2011 | FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 1: GENERAL |
I.S. EN ISO 10432:2005 | PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - SUBSURFACE SAFETY VALVE EQUIPMENT |
I.S. EN 13230-3:2016 | RAILWAY APPLICATIONS - TRACK - CONCRETE SLEEPERS AND BEARERS - PART 3: TWIN-BLOCK REINFORCED SLEEPERS |
I.S. EN ISO 898-1:2013 | MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 1: BOLTS, SCREWS AND STUDS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD (ISO 898-1:2013) |
I.S. EN 10269:2013 | STEELS AND NICKEL ALLOYS FOR FASTENERS WITH SPECIFIED ELEVATED AND/OR LOW TEMPERATURE PROPERTIES |
I.S. EN 12020-1:2008 | ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED PRECISION PROFILES IN ALLOYS EN AW-6060 AND EN AW-6063 - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
I.S. EN 1559-2:2014 | FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 2 - ADDITIONAL REQUIREMENTS FOR STEEL CASTINGS |
I.S. EN ISO 14310:2008 | PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - PACKERS AND BRIDGE PLUGS |
I.S. EN ISO 11960:2014 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR USE AS CASING OR TUBING FOR WELLS (ISO 11960:2014) |
I.S. EN 12392:2016 | ALUMINIUM AND ALUMINIUM ALLOYS - WROUGHT PRODUCTS AND CAST PRODUCTS - SPECIAL REQUIREMENTS FOR PRODUCTS INTENDED FOR THE PRODUCTION OF PRESSURE EQUIPMENT |
I.S. EN 10083-2:2006 | STEELS FOR QUENCHING AND TEMPERING - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON ALLOY STEELS |
I.S. EN 10272:2016&LC:2016 | STAINLESS STEEL BARS FOR PRESSURE PURPOSES |
I.S. EN 1561:2011 | FOUNDING - GREY CAST IRONS |
I.S. EN 13604:2013 | COPPER AND COPPER ALLOYS - SEMICONDUCTOR DEVICES, ELECTRONIC AND VACUUM PRODUCTS MADE FROM HIGH CONDUCTIVITY COPPER |
I.S. EN 12513:2011 | FOUNDING - ABRASION RESISTANT CAST IRONS |
I.S. EN 545:2010 | DUCTILE IRON PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS FOR WATER PIPELINES - REQUIREMENTS AND TEST METHODS |
I.S. EN 10088-3:2014 | STAINLESS STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR SEMI-FINISHED PRODUCTS, BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
I.S. EN 303-1:2017 | HEATING BOILERS - PART 1: HEATING BOILERS WITH FORCED DRAUGHT BURNERS - TERMINOLOGY, GENERAL REQUIREMENTS, TESTING AND MARKING |
I.S. EN 14730-1:2017 | RAILWAY APPLICATIONS - TRACK - ALUMINOTHERMIC WELDING OF RAILS - PART 1: APPROVAL OF WELDING PROCESSES |
I.S. EN 303-5:2012 | HEATING BOILERS - PART 5: HEATING BOILERS FOR SOLID FUELS, MANUALLY AND AUTOMATICALLY STOKED, NOMINAL HEAT OUTPUT OF UP TO 500 KW - TERMINOLOGY, REQUIREMENTS, TESTING AND MARKING |
DIN EN ISO 6506-2:2015-02 | METALLIC MATERIALS - BRINELL HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES (ISO 6506-2:2014) |
DIN EN ISO 11439:2013-09 | Gas cylinders - High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles (ISO 11439:2013) |
I.S. EN ISO 6506-3:2014 | METALLIC MATERIALS - BRINELL HARDNESS TEST - PART 3: CALIBRATION OF REFERENCE BLOCKS (ISO 6506-3:2014) |
I.S. EN 14394:2006 | HEATING BOILERS - HEATING BOILERS WITH FORCED DRAUGHT BURNERS - NOMINAL HEAT OUTPUT NOT EXCEEDING 10 MW AND MAXIMUM OPERATING TEMPERATURE OF 110 DEGREE C |
I.S. EN ISO 683-17:2014 | HEAT-TREATED STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 17: BALL AND ROLLER BEARING STEELS (ISO 683-17:2014) |
DIN EN 10088-3:2014-12 | Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes |
DIN EN 10083-3:2007-01 | STEELS FOR QUENCHING AND TEMPERING - PART 3: TECHNICAL DELIVERY CONDITIONS FOR ALLOY STEELS |
I.S. EN ISO 898-5:2012 | MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 5: SET SCREWS AND SIMILAR THREADED FASTENERS WITH SPECIFIED HARDNESS CLASSES - COARSE THREAD AND FINE PITCH THREAD (ISO 898-5:2012) |
I.S. EN 12165:2016 | COPPER AND COPPER ALLOYS - WROUGHT AND UNWROUGHT FORGING STOCK |
I.S. EN ISO 16070:2006 | PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - LOCK MANDRELS AND LANDING NIPPLES |
I.S. EN 13674-1:2011 | RAILWAY APPLICATIONS - TRACK - RAIL - PART 1: VIGNOLE RAILWAY RAILS 46 KG/M AND ABOVE |
I.S. EN 12164:2016 | COPPER AND COPPER ALLOYS - ROD FOR FREE MACHINING PURPOSES |
I.S. EN 10277-1:2008 | BRIGHT STEEL PRODUCTS - TECHNICAL DELIVERY CONDITIONS - PART 1: GENERAL |
DIN EN 10277-1:2008-06 | BRIGHT STEEL PRODUCTS - TECHNICAL DELIVERY CONDITIONS - PART 1: GENERAL |
I.S. EN 1564:2011 | FOUNDING - AUSFERRITIC SPHEROIDAL GRAPHITE CAST IRONS |
I.S. EN 12420:2014 | COPPER AND COPPER ALLOYS - FORGINGS |
I.S. EN ISO 4498:2010 | SINTERED METAL MATERIALS, EXCLUDING HARDMETALS - DETERMINATION OF APPARENT HARDNESS AND MICROHARDNESS |
I.S. EN ISO 3506-3:2009 | MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 3: SET SCREWS AND SIMILAR FASTENERS NOT UNDER TENSILE STRESS |
I.S. EN 14359:2017 | GAS-LOADED ACCUMULATORS FOR FLUID POWER APPLICATIONS |
I.S. EN 12163:2016 | COPPER AND COPPER ALLOYS - ROD FOR GENERAL PURPOSES |
I.S. EN 755-1:2016 | ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED ROD/BAR, TUBE AND PROFILES - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
I.S. EN ISO 11439:2013 | GAS CYLINDERS - HIGH PRESSURE CYLINDERS FOR THE ON-BOARD STORAGE OF NATURAL GAS AS A FUEL FOR AUTOMOTIVE VEHICLES (ISO 11439:2013) |
UNI EN ISO 14998 : 2014 | PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - COMPLETION ACCESSORIES |
SBAC TS 220 : 1 | TECHNICAL SPECIFICATION FOR UNION NUTS, SELF-LOCKING (UNIFIED THREADS) - HIGH TEMPERATURE NICKEL ALLOY INCONEL 718 CLASSIFICATION R[M] >= 1270 MPA (185000 LBF/IN[2]) @ T[A]/+705 DEGREES C |
VDI 3405-2-1 : 2015 COR 2017 | ADDITIVE MANUFACTURING PROCESSES, RAPID MANUFACTURING - LASER BEAM MELTING OF METALLIC PARTS; MATERIAL DATA SHEET ALUMINIUM ALLOY ALSI10MG |
VDI 3405 Blatt 2:2013-08 | Additive manufacturing processes, rapid manufacturing - Beam melting of metallic parts - Qualification, quality assurance and post processing |
UNE-EN 16482:2014 | Founding - Continuous cast iron bars |
DIN EN 1563:2015-07 (Draft) | FOUNDING - SPHEROIDAL GRAPHITE CAST IRONS |
UNI EN ISO 9170-2 : 2008 | TERMINAL UNITS FOR MEDICAL GAS PIPELINE SYSTEMS - PART 2: TERMINAL UNITS FOR ANAESTHETIC GAS SCAVENGING SYSTEMS |
06/30143291 DC : DRAFT MAY 2006 | ISO 5182 - WELDING - MATERIALS FOR RESISTANCE WELDING ELECTRODES AND ANCILLARY EQUIPMENT |
NF EN ISO 9809-3 : 2011 | GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 3: NORMALIZED STEEL CYLINDERS |
API SPEC 19OH : 2018 | OPENHOLE ISOLATION EQUIPMENT |
PREN 12842 : DRAFT 2010 | DUCTILE IRON FITTINGS FOR PVC-U OR PE PIPING SYSTEMS - REQUIREMENTS AND TEST METHODS |
BS EN 16079:2011 | Founding. Compacted (vermicular) graphite cast irons |
15/30296029 DC : 0 | BS ISO 4955 - HEAT-RESISTANT STEELS |
BS EN 4700-004:2010 | Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Wire |
09/30202316 DC : 0 | BS EN 12514-4 - PARTS FOR SUPPLY SYSTEMS FOR CONSUMING UNITS WITH LIQUID FUELS - PART 4: SAFETY REQUIREMENTS AND TESTS - PIPINGS AND PARTS WITHIN PIPELINES |
BS ISO 17918:2015 | Corrosion of metals and alloys. Evaluation of selective corrosion of Cu alloys and grey cast iron for power plant components by visual inspection and hardness measurement |
BS EN ISO 17078-4:2010 | Petroleum and natural gas industries. Drilling and production equipment Practices for side-pocket mandrels and related equipment CD-ROM |
08/30181473 DC : DRAFT JULY 2008 | BS EN 545 - DUCTILE IRON PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS FOR WATER PIPELINES - REQUIREMENTS AND TEST METHODS |
03/116565 DC : DRAFT OCT 2003 | ISO 20703 - GAS CYLINDERS - REFILLABLE WELDED ALUMINIUM ALLOY - DESIGN, CONSTRUCTION AND TESTING |
BS ISO 16468:2015 | Investment castings (steel, nickel alloys and cobalt alloys). General technical requirements |
NF EN ISO 11961 : 2010 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL DRILL PIPE |
03/114555 DC : DRAFT SEP 2003 | EN 14772 - FLANGES AND THEIR JOINTS - QUALITY ASSURANCE INSPECTION AND TESTING OF GASKETS IN ACCORDANCE WITH THE SERIES OF STANDARDS EN 1514 AND EN 12560 |
API 19G1 CHINESE : 2010 | SIDE-POCKET MANDRELS |
API 14A : 2015 | SPECIFICATION FOR SUBSURFACE SAFETY VALVE EQUIPMENT |
API 16A : 2017 | SPECIFICATION FOR DRILL-THROUGH EQUIPMENT |
BS EN 13001-3-3:2014 | Cranes. General design Limit states and proof of competence of wheel/rail contacts |
BS EN 4700-002:2016 | Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Bar and section |
08/30182454 DC : DRAFT JULY 2008 | BS EN 10208-1 - STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 1: PIPES OF REQUIREMENT CLASS A |
UNI EN 4700-005 : 2011 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 005: FORGING STOCK |
API7-1 RUSSIAN-2006+ADD3-2011(R2015) | SPECIFICATION FOR ROTARY DRILL STEM ELEMENTS |
NF ISO 7795 : 2011 | CROSS-COUNTRY SKIS - SKI-BINDING SCREWS - TEST METHODS |
BS EN ISO 9015-1:2011 | Destructive tests on welds in metallic materials. Hardness testing Hardness test on arc welded joints |
BS EN 15185:2011 | Furniture. Assessment of the surface resistance to abrasion |
17/30354758 DC : DRAFT JUL 2017 | BS ISO 185 - GREY CAST IRONS - CLASSIFICATION AND SPECIFICATION |
14/30295082 DC : 0 | BS ISO 683-3 - HEAT-TREATABLE STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 3: CASE HARDENING STEELS |
DIN EN 13001-3-3 E : 2015 | CRANES - GENERAL DESIGN - PART 3-3: LIMIT STATES AND PROOF OF COMPETENCE OF WHEEL/RAIL CONTACTS |
08/30180643 DC : DRAFT APRIL 2008 | BS ISO 15869-3 - GASEOUS HYDROGEN AND HYDROGEN BLENDS - LAND VEHICLE FUEL TANKS |
I.S. EN 10083-1:2006 | STEELS FOR QUENCHING AND TEMPERING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
UNI EN 4700-004 : 2011 | Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 004: Wire |
09/30200834 DC : 0 | BS EN 1559-1 - FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 1: GENERAL |
I.S. EN 16602-70-46:2014 | SPACE PRODUCT ASSURANCE - REQUIREMENTS FOR MANUFACTURING AND PROCUREMENT OF THREADED FASTENERS |
DIN EN 15594 E : 2009 | RAILWAY APPLICATIONS - TRACK - RESTORATION OF RAILS BY ELECTRIC ARC WELDING |
API SPEC 17J : 2014 | SPECIFICATION FOR UNBONDED FLEXIBLE PIPE |
PREN 754-1 : DRAFT 2015 | ALUMINIUM AND ALUMINIUM ALLOYS - COLD DRAWN ROD/BAR AND TUBE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
BS EN ISO 9809-3:2010 | Gas cylinders. Refillable seamless steel gas cylinders. Design, construction and testing Normalized steel cylinders |
BS ISO 4990:2015 | Steel castings. General technical delivery requirements |
UNI EN 303-5 : 2012 | HEATING BOILERS - PART 5: HEATING BOILERS FOR SOLID FUELS, MANUALLY AND AUTOMATICALLY STOKED, NOMINAL HEAT OUTPUT OF UP TO 500 KW - TERMINOLOGY, REQUIREMENTS, TESTING AND MARKING |
12/30261889 DC : 0 | BS EN 12420 - COPPER AND COPPER ALLOYS - FORGINGS |
13/30288572 DC : 0 | BS EN 10272 - STAINLESS STEEL BARS FOR PRESSURE PURPOSES |
07/30168419 DC : 0 | BS EN 1982 - COPPER AND COPPER ALLOYS - INGOTS AND CASTINGS |
16/30339349 DC : DRAFT APR 2016 | BS EN ISO 6506-2 - METALLIC MATERIALS - BRINELL HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES |
12/30267860 DC : 0 | BS EN 16482 - FOUNDING - CONTINUOUS CAST IRON BARS |
DIN EN ISO 17945 E : 2015 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - METALLIC MATERIALS RESISTANT TO SULFIDE STRESS CRACKING IN CORROSIVE PETROLEUM REFINING ENVIRONMENTS (ISO 17945:2015) |
UNE-EN 15185:2011 | Furniture - Assessment of the surface resistance to abrasion |
DIN EN ISO 12679:2015-12 | THERMAL SPRAYING - RECOMMENDATIONS FOR THERMAL SPRAYING (ISO 12679:2011) |
API 5DP : 2010(R2015) | SPECIFICATION FOR DRILL PIPE |
11/30210148 DC : 0 | BS EN ISO 18265 - METALLIC MATERIALS - CONVERSION OF HARDNESS VALUES |
08/30187526 DC : 0 | BS EN 14121 - ALUMINIUM AND ALUMINIUM ALLOYS - ALUMINIUM SHEET, STRIP AND PLATE FOR ELECTROTECHNICAL APPLICATIONS |
BS EN 60439-5:2006 | Low-voltage switchgear and controlgear assemblies Particular requirements for assemblies for power distribution in public networks |
DIN EN ISO 9809-3:2010-10 | GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 3: NORMALIZED STEEL CYLINDERS |
15/30324460 DC : 0 | BS EN 754-1 - ALUMINIUM AND ALUMINIUM ALLOYS - COLD DRAWN ROD/BAR AND TUBE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
02/121747 DC : DRAFT APR 2002 | PREN 438-2 - HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 2: DETERMINATION OF PROPERTIES |
BS EN ISO 9170-2:2008 | Terminal units for medical gas pipeline systems Terminal units for anaesthetic gas scavenging systems |
11/30230615 DC : 0 | BS ISO 683-1 - HEAT-TREATABLE STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 1: NON-ALLOY STEELS FOR QUENCHING AND TEMPERING |
DIN EN ISO 12679 E : 2015 | THERMAL SPRAYING - RECOMMENDATIONS FOR THERMAL SPRAYING (ISO 12679:2011) |
ISO 7206-10:2003 | Implants for surgery Partial and total hip-joint prostheses Part 10: Determination of resistance to static load of modular femoral heads |
BS ISO 18172-1:2007 | Gas cylinders. Refillable welded stainless steel cylinders Test pressure 6 MPa and below |
BS ISO 18137:2015 | Leaf springs. Technical specifications |
BS ISO 14661:2000 | Thermal turbines for industrial applications (steam turbines, gas expansion turbines). General requirements |
BS EN 16771:2016 | Railway applications. Infrastructure. Aluminothermic welding of grooved rails |
05/30132603 DC : DRAFT APR 2005 | EN 10083-3 - STEELS FOR QUENCHING AND TEMPERING - PART 3: TECHNICAL DELIVERY CONDITIONS FOR ALLOY STEELS |
05/30126202 DC : 0 | EN 10088-4 - STAINLESS STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR CONSTRUCTION PURPOSES |
BS EN ISO 898-2:2012 | Mechanical properties of fasteners made of carbon steel and alloy steel Nuts with specified property classes. Coarse thread and fine pitch thread |
I.S. EN 10085:2001 | NITRIDING STEELS - TECHNICAL DELIVERY CONDITIONS |
BS EN 10083-3 : 2006-08 | STEELS FOR QUENCHING AND TEMPERING - PART 3: TECHNICAL DELIVERY CONDITIONS FOR ALLOY STEELS |
DIN EN 14917 E : 2012 | METAL BELLOWS EXPANSION JOINTS FOR PRESSURE APPLICATIONS |
API 19G4 : 2011 | PRACTICES FOR SIDE-POCKET MANDRELS AND RELATED EQUIPMENT |
API 7-1 SPANISH : 2006 | SPECIFICATION FOR ROTARY DRILL STEM ELEMENTS |
I.S. EN 16273:2014 | RAILWAY APPLICATIONS - TRACK - FORGED RAIL TRANSITIONS |
EN 438-2:2016 | High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 2: Determination of properties |
PREN 14688 : DRAFT 2014 | SANITARY APPLIANCES - WASH BASINS - FUNCTIONAL REQUIREMENTS AND TEST METHODS |
API SPEC 17K : 2017 | SPECIFICATION FOR BONDED FLEXIBLE PIPE |
BS EN ISO 12679:2015 | Thermal spraying. Recommendations for thermal spraying |
DIN EN 14688:2015-10 | SANITARY APPLIANCES - WASH BASINS - FUNCTIONAL REQUIREMENTS AND TEST METHODS |
API 11D1 CHINESE : 2009 | PACKERS AND BRIDGE PLUGS |
I.S. EN 4700-001:2010 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 001: PLATE, SHEET AND STRIP |
API 7-1 : 2006 : INC : ADD 3 : 2011 : R2015 | SPECIFICATION FOR ROTARY DRILL STEM ELEMENTS |
ISO 24338:2014 | Laminate floor coverings Determination of abrasion resistance |
EN 14157:2017 | Natural stone test methods - Determination of the abrasion resistance |
UNI EN 4700-003 : 2011 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 003: TUBE |
API 16AR : 2017 | STANDARD FOR REPAIR AND REMANUFACTURE OF DRILL-THROUGH EQUIPMENT |
I.S. EN ISO 9170-2:2008 | TERMINAL UNITS FOR MEDICAL GAS PIPELINE SYSTEMS - PART 2: TERMINAL UNITS FOR ANAESTHETIC GAS SCAVENGING SYSTEMS |
ISO 11119-1:2012 | Gas cylinders Refillable composite gas cylinders and tubes Design, construction and testing Part 1: Hoop wrapped fibre reinforced composite gas cylinders and tubes up to 450 l |
I.S. EN 60439-5:2006 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 5: PARTICULAR REQUIREMENTS FOR ASSEMBLIES FOR POWER DISTRIBUTION IN PUBLIC NETWORKS |
ISO 18119:2018 | Gas cylinders — Seamless steel and seamless aluminium-alloy gas cylinders and tubes — Periodic inspection and testing |
KTA 3211.1 : 2015 | PRESSURE AND ACTIVITY RETAINING COMPONENTS OF SYSTEMS OUTSIDE THE PRIMARY CIRCUIT - PART 1: MATERIALS |
I.S. EN ISO 7866:2012 | GAS CYLINDERS - REFILLABLE SEAMLESS ALUMINIUM ALLOY GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING (ISO 7866:2012) |
UNE-EN ISO 898-2:2013 | Mechanical properties of fasteners made of carbon steel and alloy steel - Part 2: Nuts with specified property classes - Coarse thread and fine pitch thread (ISO 898-2:2012) |
EN 1562:2012 | Founding - Malleable cast irons |
17/30347070 DC : 0 | BS EN 10340-2 - STEEL CASTINGS FOR STRUCTURAL USES - PART 2: TECHNICAL DELIVERY CONDITIONS |
PREN 15566 : DRAFT 2013 | RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - DRAW GEAR AND SCREW COUPLING |
PREN 12420 : DRAFT 2012 | COPPER AND COPPER ALLOYS - FORGINGS |
BS EN 16668 : 2016 | INDUSTRIAL VALVES - REQUIREMENTS AND TESTING FOR METALLIC VALVES AS PRESSURE ACCESSORIES |
EN 13674-4:2006+A1:2009 | RAILWAY APPLICATIONS - TRACK - RAIL - PART 4: VIGNOLE RAILWAY RAILS FROM 27 KG/M TO, BUT EXCLUDING 46 KG/M |
UNI EN ISO 7866 : 2012 | GAS CYLINDERS - REFILLABLE SEAMLESS ALUMINIUM ALLOY GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING |
PREN 1559-2 : DRAFT 2012 | FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 2: ADDITIONAL REQUIREMENTS FOR STEEL CASTINGS |
ISO 9809-4:2014 | Gas cylinders Refillable seamless steel gas cylinders Design, construction and testing Part 4: Stainless steel cylinders with an Rm value of less than 1 100 MPa |
DIN EN 1564:2012-01 | Founding - Ausferritic spheroidal graphite cast irons |
UNI EN ISO 11961 : 2009 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL DRILL PIPE |
ISO 11891:2012 | Hot formed helical compression springs — Technical specifications |
ISO 17804:2005 | Founding Ausferritic spheroidal graphite cast irons Classification |
DIN EN 1706:2013-12 | ALUMINIUM AND ALUMINIUM ALLOYS - CASTINGS - CHEMICAL COMPOSITION AND MECHANICAL PROPERTIES |
I.S. EN ISO 17078-3:2009 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 3: RUNNING TOOLS, PULLING TOOLS AND KICK-OVER TOOLS AND LATCHES FOR SIDE-POCKET MANDRELS |
EN 12420:2014 | Copper and copper alloys - Forgings |
UNE-EN 10088-2:2015 | Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes |
I.S. EN 14917:2009 | METAL BELLOWS EXPANSION JOINTS FOR PRESSURE APPLICATIONS |
EN 1561:2011 | Founding - Grey cast irons |
ISO 6336-5:2016 | Calculation of load capacity of spur and helical gears Part 5: Strength and quality of materials |
EN 12163:2016 | Copper and copper alloys - Rod for general purposes |
DIN EN 12392:2016-08 | Aluminium and aluminium alloys - Wrought products and cast products - Special requirements for products intended for the production of pressure equipment |
DIN EN 10083-1:2006-10 | STEELS FOR QUENCHING AND TEMPERING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
DIN EN 754-1:2016-10 | ALUMINIUM AND ALUMINIUM ALLOYS - COLD DRAWN ROD/BAR AND TUBE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
DIN EN ISO 683-17:2015-02 | Heat-treated steels, alloy steels and free-cutting steels - Part 17: Ball and roller bearing steels (ISO 683-17:2014) |
DIN EN 13748-1:2005-08 | TERRAZZO TILES - PART 1: TERRAZZO TILES FOR INTERNAL USE |
EN ISO 13628-2:2006/AC:2009 | PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 2: UNBONDED FLEXIBLE PIPE SYSTEMS FOR SUBSEA AND MARINE APPLICATIONS |
DIN EN 12420:2014-09 | COPPER AND COPPER ALLOYS - FORGINGS |
DIN EN ISO 11960:2014-05 | Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells (ISO 11960:2014); English version EN ISO 11960:2014, only on CD-ROM |
UNE-EN 10208-1:2011 | Steel pipes for pipelines for combustible fluids - Technical delivery conditions - Part 1: Pipes of requirement class A |
DIN EN 1337-4 E : 2004 | STRUCTURAL BEARINGS - PART 4: ROLLER BEARINGS |
DIN EN 14525 E : 2005 | DUCTILE IRON WIDE TOLERANCE COULINGS AND FLANGE ADAPTORS FOR USE WITH PIPES OF DIFFERENT MATERIALS: DUCTILE IRON, GREY IRON, STEEL, PVC-U, PE, FIBRE-CEMENT |
DIN EN 10089:2003-04 | Hot rolled steels for quenched and tempered springs - Technical delivery conditions; German version EN 10089:2002 |
DIN EN 14394 E : 2008 | HEATING BOILERS - HEATING BOILERS WITH FORCED DRAUGHT BURNERS - NOMINAL HEAT OUTPUT NOT EXCEEDING 10 MW AND MAXIMUM OPERATING TEMPERATURE OF 110 DEGREE C |
DIN EN 14394:2008-12 | HEATING BOILERS - HEATING BOILERS WITH FORCED DRAUGHT BURNERS - NOMINAL HEAT OUTPUT NOT EXCEEDING 10 MW AND MAXIMUM OPERATING TEMPERATURE OF 110 DEGREE C |
UNE-EN 14730-1:2018 | Railway applications - Track - Aluminothermic welding of rails - Part 1: Approval of welding processes |
DIN EN ISO 19054:2006-09 | RAIL SYSTEMS FOR SUPPORTING MEDICAL EQUIPMENT (ISO 19054:2005 + AMD1:2016) |
ISO 17078-4:2010 | Petroleum and natural gas industries — Drilling and production equipment — Part 4: Practices for side-pocket mandrels and related equipment |
BS EN 13674-1 : 2011 | RAILWAY APPLICATIONS - TRACK - RAIL - PART 1: VIGNOLE RAILWAY RAILS 46 KG/M AND ABOVE |
BS EN 459-2:2010 | Building lime Test methods |
BS EN 545:2010 | Ductile iron pipes, fittings, accessories and their joints for water pipelines. Requirements and test methods |
BS EN 10208-2:2009 | Steel pipes for pipelines for combustible fluids. Technical delivery conditions Pipes of requirement class B |
IEC 60439-5:2006 | Low-voltage switchgear and controlgear assemblies - Part 5: Particular requirements for assemblies for power distribution in public networks |
UNE-EN 755-1:2016 | Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 1: Technical conditions for inspection and delivery |
BS EN 969:2009 | Ductile iron pipes, fittings, accessories and their joints for gas pipelines. Requirements and test methods |
UNE-EN 459-2:2011 | Building lime - Part 2: Test methods |
BS EN ISO 898-1:2013 | Mechanical properties of fasteners made of carbon steel and alloy steel Bolts, screws and studs with specified property classes. Coarse thread and fine pitch thread |
BS EN ISO 17078-2:2007 | Petroleum and natural gas industries. Drilling and production equipment Flow-control devices for side-pocket mandrels |
BS EN 12168:1998 | Copper and copper alloys. Hollow rod for free machining purposes |
ISO 9015-1:2001 | Destructive tests on welds in metallic materials Hardness testing Part 1: Hardness test on arc welded joints |
UNE-EN 12842:2013 | Ductile iron fittings for PVC-U or PE piping systems - Requirements and test methods |
UNE-EN 10088-3:2015 | Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes |
DIN EN 1337-4:2004-08 | Structural bearings - Part 4: Roller bearings |
UNE-EN 1982:2018 | Copper and copper alloys - Ingots and castings |
BS EN 1706:2010 | Aluminium and aluminium alloys. Castings. Chemical composition and mechanical properties |
UNE-EN 1564:2012 | Founding - Ausferritic spheroidal graphite cast irons |
UNI EN ISO 3506-2 : 2010 | MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS-STEEL FASTENERS - PART 2: NUTS |
EN ISO 9170-1:2008 | Terminal units for medical gas pipeline systems - Part 1: Terminal units for use with compressed medical gases and vacuum (ISO 9170-1:2008) |
UNI EN 13262 : 2011 | RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - WHEELS - PRODUCT REQUIREMENTS |
ONORM EN ISO 9170-1 : 2008 | TERMINAL UNITS FOR MEDICAL GAS PIPELINE SYSTEMS - PART 1: TERMINAL UNITS FOR USE WITH COMPRESSED MEDICAL GASES AND VACUUM |
UNE-EN 12449:2016 | Copper and copper alloys - Seamless, round tubes for general purposes |
UNI EN 1706 : 2010 | ALUMINIUM AND ALUMINIUM ALLOYS - CASTINGS - CHEMICAL COMPOSITION AND MECHANICAL PROPERTIES |
EN ISO 6506-2:2014 | Metallic materials - Brinell hardness test - Part 2: Verification and calibration of testing machines (ISO 6506-2:2014) |
ONORM EN ISO 3506-2 : 2010 | MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 2: NUTS |
ONORM EN 13674-4 : 2011 | RAILWAY APPLICATIONS - TRACK - RAIL - PART 4: VIGNOLE RAILWAY RAILS FROM 27 KG/M TO, BUT EXCLUDING 46 KG/M |
I.S. EN 13262:2004 | RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - WHEELS - PRODUCT REQUIREMENTS |
EN 13262:2004+A2:2011 | Railway applications - Wheelsets and bogies - Wheels - Product requirements |
UNI EN ISO 3506-1 : 2010 | MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS-STEEL FASTENERS - PART 1: BOLTS, SCREWS AND STUDS |
ONORM EN ISO 3506-1 : 2010 | MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 1: BOLTS, SCREWS AND STUDS |
EN 485-1:2016 | Aluminium and aluminium alloys - Sheet, strip and plate - Part 1: Technical conditions for inspection and delivery |
EN 14354:2017 | Wood-based panels - Wood veneer floor coverings |
UNI EN 10088-3 : 2014 | STAINLESS STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR SEMIFINISHED PRODUCTS, BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
UNI EN 10208-2 : 2009 | STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 2: PIPES OF REQUIREMENT CLASS B |
UNI EN ISO 17078-2 : 2009 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 2: FLOW-CONTROL DEVICES FOR SIDE-POCKET MANDRELS |
UNI EN ISO 4498 : 2010 | SINTERED METAL MATERIALS, EXCLUDING HARDMETALS - DETERMINATION OF APPARENT HARDNESS AND MICROHARDNESS |
UNI EN ISO 683-17 : 2014 | HEAT-TREATED STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 17: BALL AND ROLLER BEARING STEELS |
UNI EN ISO 17078-1 : 2010 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 1: SIDE-POCKET MANDRELS |
UNI EN 10269 : 2013 | Nickel steels and alloys for fasteners with specific properties at high and / or low temperatures |
UNI EN 12513 : 2011 | Founding - Abrasion resistant cast irons |
UNI EN 13835 : 2012 | FOUNDING - AUSTENITIC CAST IRONS |
UNI EN 10083-1 : 2006 | STEELS FOR QUENCHING AND TEMPERING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
UNI EN 14394 : 2008 | HEATING BOILERS - HEATING BOILERS WITH FORCED DRAUGHT BURNERS - NOMINAL HEAT OUTPUT NOT EXCEEDING 10 MW AND MAXIMUM OPERATING TEMPERATURE OF 110 DEGREES C |
EN 1559-2:2014 | Founding - Technical conditions of delivery - Part 2: Additional requirements for steel castings |
UNI EN ISO 18265 : 2014 | METALLIC MATERIALS - CONVERSION OF HARDNESS VALUES |
UNI EN 1559-2 : 2014 | FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 2: ADDITIONAL REQUIREMENTS FOR STEEL CASTINGS |
UNI EN 14525 : 2005 | DUCTILE IRON WIDE TOLERANCE COUPLINGS AND FLANGE ADAPTORS FOR USE WITH PIPES OF DIFFERENT MATERIALS: DUCTILE IRON, GREY IRON, STEEL, PVC-U PE, FIBRE-CEMENT |
UNI EN 969 : 2009 | DUCTILE IRON PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS FOR GAS PIPELINES - REQUIREMENTS AND TEST METHODS |
UNI EN 10083-3 : 2006 | STEELS FOR QUENCHING AND TEMPERING - PART 3: TECHNICAL DELIVERY CONDITIONS FOR ALLOY STEELS |
UNI EN 12842 : 2012 | DUCTILE IRON FITTINGS FOR PVC-U OR PE PIPING SYSTEMS - REQUIREMENTS AND TEST METHODS |
UNI EN 12420 : 2014 | COPPER AND COPPER ALLOYS - FORGINGS |
UNI EN 1561 : 2011 | FOUNDING - GREY CAST IRONS |
EN ISO 10432:2004 | Petroleum and natural gas industries - Downhole equipment - Subsurface safety valve equipment (ISO 10432:2004) |
UNI EN 10218-1 : 2012 | STEEL WIRE AND WIRE PRODUCTS - GENERAL - PART 1: TEST METHODS |
UNI EN ISO 13628-2 : 2007 | PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 2: UNBONDED FLEXIBLE PIPE SYSTEMS FOR SUBSEA AND MARINE APPLICATIONS |
UNI EN 10208-1 : 2009 | STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 1: PIPES OF REQUIREMENT CLASS A |
UNI EN ISO 898-1 : 2013 | MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 1: BOLTS, SCREWS AND STUDS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD |
UNI EN 1559-1 : 2011 | FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 1: GENERAL |
UNI EN ISO 3506-3 : 2010 | MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS-STEEL FASTENERS - PART 3: SET SCREWS AND SIMILAR FASTENERS NOT UNDER TENSILE STRESS |
UNI EN 1564 : 2011 | FOUNDING - AUSFERRITIC SPHEROIDAL GRAFITE CAST IRONS |
UNI EN 13674-3 : 2010 | RAILWAY APPLICATIONS - TRACK - RAIL - PART 3: CHECK RAILS |
I.S. EN 14525:2005 | DUCTILE IRON WIDE TOLERANCE COUPLINGS AND FLANGE ADAPTORS FOR USE WITH PIPES OF DIFFERENT MATERIALS: DUCTILE IRON, GREY IRON, STEEL, PVC-U PE, FIBRE-CEMENT |
UNI EN 545 : 2010 | DUCTILE IRON PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS FOR WATER PIPELINES - REQUIREMENTS AND TEST METHODS |
EN ISO 13628-10:2006 | Petroleum and natural gas industries - Design and operation of subsea production systems - Part 10: Specification for bonded flexible pipe (ISO 13628-10:2006) |
UNI EN 10088-2:2014 | STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
UNI EN ISO 14310 : 2009 | PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - PACKERS AND BRIDGE PLUGS |
UNI EN 10084 : 2008 | CASE HARDENING STEELS - TECHNICAL DELIVERY CONDITIONS |
UNI EN ISO 898-5 : 2012 | MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 5: SET SCREWS AND SIMILAR THREADED FASTENERS WITH SPECIFIED HARDNESS CLASSES - COARSE THREAD AND FINE PITCH THREAD |
UNI EN 1338 : 2004 | CONCRETE PAVING BLOCKS - REQUIREMENTS AND TEST METHODS |
UNI EN 14121 : 2009 | ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE FOR ELECTROTECHNICAL APPLICATIONS |
UNI EN 598 : 2009 | DUCTILE IRON PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS FOR SEWERAGE APPLICATIONS - REQUIREMENTS AND TEST METHODS |
UNI EN 755-1 : 2008 | ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED ROD/BAR, TUBE AND PROFILES - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
UNI EN 13604 : 2013 | COPPER AND COPPER ALLOYS - SEMICONDUCTOR DEVICES, ELECTRONIC AND VACUUM PRODUCTS MADE FROM HIGH CONDUCTIVITY COPPER |
UNE-EN 10349:2011 | Steel castings - Austenitic manganese steel castings |
UNI EN 10349 : 2009 | STEEL CASTINGS - AUSTENITIC MANGANESE STEEL CASTINGS |
UNI CEN/TS 15718 : 2011 | RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - PRODUCT REQUIREMENTS FOR CAST WHEELS |
UNI EN 15594 : 2009 | RAILWAY APPLICATIONS - TRACK - RESTORATION OF RAILS BY ELECTRIC ARC WELDING |
10/30165716 DC : 0 | BS ISO 898-6 - MECHANICAL PROPERTIES OF FASTENERS - PART 6: NUTS WITH SPECIFIED PROOF LOAD VALUES - FINE PITCH THREAD |
DIN EN 15185:2011-07 | Furniture - Assessment of the surface resistance to abrasion |
DIN EN 16124:2012-02 | Founding - Low-alloyed ferritic spheroidal graphite cast irons for elevated temperature applications |
BS EN 16273:2014 | Railway applications. Track. Forged rail transitions |
EN 303-5:2012 | Heating boilers - Part 5: Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW - Terminology, requirements, testing and marking |
I.S. EN ISO 9170-1:2008 | TERMINAL UNITS FOR MEDICAL GAS PIPELINE SYSTEMS - PART 1: TERMINAL UNITS FOR USE WITH COMPRESSED MEDICAL GASES AND VACUUM |
07/30161097 DC : 0 | EN ISO 14310 - PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT PACKERS AND BRIDGE PLUGS |
15/30317619 DC : 0 | BS EN ISO 5470-1 - RUBBER- OR PLASTICS-COATED FABRICS - DETERMINATION OF ABRASION RESISTANCE - PART 1: TABER ABRADER |
NF EN ISO 9809-2 : 2010 | GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 2: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH GREATER THAN OR EQUAL TO 1100 MPA |
10/30198921 DC : 0 | BS ISO 11891 - HOT FORMED HELICAL COMPRESSION SPRINGS - TECHNICAL SPECIFICATIONS |
I.S. EN ISO 5182:2016 | RESISTANCE WELDING - MATERIALS FOR ELECTRODES AND ANCILLARY EQUIPMENT (ISO 5182:2016) |
14/30284697 DC : 0 | BS ISO 683-5 - HEAT TREATABLE STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 5: NITRIDING STEELS |
DIN ISO 7795:2011-11 | Cross-country skis - Ski-binding screws - Test methods (ISO 7795:2011) |
ISO 11119-4:2016 | Gas cylinders Refillable composite gas cylinders Design, construction and testing Part 4: Fully wrapped fibre reinforced composite gas cylinders up to 150 l with load-sharing welded metallic liners |
DIN 21530-4:2016-09 | MINE SUPPORT - PART 4: TESTING |
BS EN 16725:2016 | Railway applications. Track. Restoration and repair of manganese crossings |
DIN EN ISO 9170-2 E : 2009 | TERMINAL UNITS FOR MEDICAL GAS PIPELINE SYSTEMS - PART 2: TERMINAL UNITS FOR ANAESTHETIC GAS SCAVENGING SYSTEMS |
DIN EN 303-1:2016-07 (Draft) | HEATING BOILERS - PART 1: HEATING BOILERS WITH FORCED DRAUGHT BURNERS - TERMINOLOGY, GENERAL REQUIREMENTS, TESTING AND MARKING |
BS ISO 16143-2:2014 | Stainless steels for general purposes Corrosion-resistant semi-finished products, bars, rods and sections |
DIN EN 10088-4:2010-01 | Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes |
16/30340174 DC : 0 | BS ISO 16220 - MAGNESIUM AND MAGNESIUM ALLOYS - MAGNESIUM ALLOY INGOTS AND CASTINGS |
BS ISO 18172-2:2007 | Gas cylinders. Refillable welded stainless steel cylinders Test pressure greater than 6 MPa |
13/30264734 DC : 0 | BS ISO 17918 - EVALUATION OF SELECTIVE CORROSION OF ALLOYS BY VISUAL INSPECTION AND HARDNESS MEASUREMENT |
ISO 2531:2009 | Ductile iron pipes, fittings, accessories and their joints for water applications |
14/30297210 DC : 0 | BS EN 16273 - RAILWAY APPLICATIONS - TRACK - FORGED RAIL TRANSITIONS |
BS EN ISO 5182:2009 | Resistance welding. Materials for electrodes and ancillary equipment |
06/30148173 DC : DRAFT SEP 2006 | ISO 9809-1 - GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 1: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH LESS THAN 1100 MPA |
ISO 6506-2:2017 | Metallic materials Brinell hardness test Part 2: Verification and calibration of testing machines |
BS EN 61439-5:2015 | Low-voltage switchgear and controlgear assemblies Assemblies for power distribution in public networks |
BS ISO 683-5:2017 | Heat treatable steels, alloy steels and free-cutting steels Nitriding steels |
UNI EN 16079 : 2012 | FOUNDING - COMPACTED (VERMICULAR) GRAPHITE CAST IRONS |
04/19993251 DC : DRAFT FEB 2004 | BS ISO 3522 - CAST ALUMINIUM AND ALUMINIUM ALLOYS - CHEMICAL COMPOSITION AND MECHANICAL PROPERTIES |
10/30196135 DC : 0 | BS ISO 11515 - GAS CYLINDERS - REFILABLE COMPOSITE REINFORCED TUBES OF WATER CAPACITY BETWEEN 150 L AND 3000 L - DESIGN, CONSTRUCTION AND TESTING |
ISO 9170-1:2017 | Terminal units for medical gas pipeline systems — Part 1: Terminal units for use with compressed medical gases and vacuum |
14/30311457 DC : 0 | BS EN 13310 - KITCHEN SINKS - FUNCTIONAL REQUIREMENTS AND TEST METHODS |
I.S. EN 4700-002:2016 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 002: BAR AND SECTION |
BS ISO 21988:2006 | Abrasion-resistant cast irons. Classification |
PREN 13674-4 : DRAFT 2016 | RAILWAY APPLICATIONS - TRACK - RAIL - PART 4: VIGNOLE RAILWAY RAILS FROM 27 KG/M TO, BUT EXCLUDING 46 KG/M |
DIN EN ISO 9015-1:2011-05 | Destructive tests on welds in metallic materials - Hardness testing - Part 1: Hardness test on arc welded joints (ISO 9015-1:2001) |
BS ISO 9352:2012 | Plastics. Determination of resistance to wear by abrasive wheels |
12/30266615 DC : 0 | BS EN 1559-2 - FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 2: ADDITIONAL REQUIREMENTS FOR STEEL CASTINGS |
BS EN 13329 : 2016 | LAMINATE FLOOR COVERINGS - ELEMENTS WITH A SURFACE LAYER BASED ON AMINOPLASTIC THERMOSETTING RESINS - SPECIFICATIONS, REQUIREMENTS AND TEST METHODS |
ASTM F 3302 : 2018 | Standard for Additive Manufacturing – Finished Part Properties – Standard Specification for Titanium Alloys via Powder Bed Fusion |
UNE-EN ISO 12679:2016 | Thermal spraying - Recommendations for thermal spraying (ISO 12679:2011) |
BS ISO 7206-10:2003 | Implants for surgery. Partial and total hip-joint prostheses Determination of resistance to static load of modular femoral heads |
BS EN 4700-003:2010 | Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Tube |
DIN EN 13674-4:2016-05 (Draft) | RAILWAY APPLICATIONS - TRACK - RAIL - PART 4: VIGNOLE RAILWAY RAILS FROM 27 KG/M TO, BUT EXCLUDING 46 KG/M |
13/30289253 DC : 0 | BS EN 13329 - LAMINATE FLOOR COVERINGS - ELEMENTS WITH A SURFACE LAYER BASED ON AMINOPLASTIC THERMOSETTING RESINS - SPECIFICATIONS, REQUIREMENTS AND TEST METHODS |
PREN 14121 : DRAFT 2008 | ALUMINIUM AND ALUMINIUM ALLOYS - ALUMINIUM SHEET, STRIP AND PLATE FOR ELECTROTECHNICAL APPLICATIONS |
PREN 14157 : DRAFT 2016 | NATURAL STONE TEST METHODS - DETERMINATION OF THE ABRASION RESISTANCE |
13/30241415 DC : 0 | BS EN 15566 - RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - DRAW GEAR AND SCREW COUPLING |
DIN EN 10088-5:2009-07 | STAINLESS STEELS - PART 5: TECHNICAL DELIVERY CONDITIONS FOR BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR CONSTRUCTION PURPOSES |
BS ISO 9809-4:2014 | Gas cylinders. Refillable seamless steel gas cylinders. Design, construction and testing Stainless steel cylinders with an Rm value of less than 1 100 MPa |
12/30259634 DC : 0 | BS ISO 15399 - GASEOUS HYDROGEN - CYLINDERS AND TUBES FOR STATIONARY STORAGE |
UNI EN 14917 : 2012 | METAL BELLOWS EXPANSION JOINTS FOR PRESSURE APPLICATIONS |
11/30230612 DC : 0 | BS ISO 683-11 - HEAT-TREATABLE STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 11: CASE-HARDENING STEELS |
API 7-1 : 2006 : INC : ADD 3 : 2011 | SPECIFICATION FOR ROTARY DRILL STEM ELEMENTS |
DIN EN 16079:2012-02 | Founding - Compacted (vermicular) graphite cast irons; German version EN 16079:2011 |
API 14L : 2007 : R2012 | SPECIFICATION FOR LOCK MANDRELS AND LANDING NIPPLES |
API 6DSS : 2017-08 | SPECIFICATION FOR SUBSEA PIPELINE VALVES |
BS EN 16482:2014 | Founding. Continuous cast iron bars |
BS ISO 16143-1:2014 | Stainless steels for general purposes Corrosion-resistant flat products |
04/30107683 DC : DRAFT DEC 2004 | BS EN ISO 15136-2 - PETROLEUM AND NATURAL GAS INDUSTRIES - PROGRESSING CAVITY PUMPS SYSTEMS FOR ARTIFICIAL LIFT - PART 2: SURFACE DRIVE SYSTEMS |
BS EN ISO 11118:2015 | Gas cylinders. Non-refillable metallic gas cylinders. Specification and test methods |
04/30103964 DC : DRAFT MAY 2004 | BS ISO 16070 - PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - LOCK MANDRELS AND LANDING NIPPLES |
UNE-EN 438-2:2016 | High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 2: Determination of properties |
CSA Z9170.1 : 2011 : R2015 | TERMINAL UNITS FOR MEDICAL GAS PIPELINE SYSTEMS - PART 1: TERMINAL UNITS FOR USE WITH COMPRESSED MEDICAL GASES, VACUUM, AND ANAESTHETIC GAS SCAVENGING SYSTEMS |
CSA Z9170.1 : 2011 | TERMINAL UNITS FOR MEDICAL GAS PIPELINE SYSTEMS - PART 1: TERMINAL UNITS FOR USE WITH COMPRESSED MEDICAL GASES, VACUUM, AND ANAESTHETIC GAS SCAVENGING SYSTEMS |
UNI EN 13674-2 : 2010 | RAILWAY APPLICATIONS - TRACK - RAIL - PART 2: SWITCH AND CROSSING RAILS USED IN CONJUNCTION WITH VIGNOLE RAILWAY RAILS 46 KG/M AND ABOVE |
DIN EN ISO 9809-1:2010-10 | GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 1: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH LESS THAN 1100 MPA |
API SPEC 16C : 2015 | CHOKE AND KILL EQUIPMENT |
EN 14688:2015 | Sanitary appliances - Wash basins - Functional requirements and test methods |
IS 1367 : Part 3 : 2017 | TECHNICAL SUPPLY CONDITIONS FOR THREADED STEEL FASTENERS - PART 3: MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND BOLTS, SCREWS AND STUDS |
EN 13310:2015 | Kitchen sinks - Functional requirements and test methods |
UNE-EN ISO 11118:2016 | Gas cylinders - Non-refillable metallic gas cylinders - Specification and test methods (ISO 11118:2015) |
BS EN 10088-4:2009 | Stainless steels Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes |
API 7-1 CHINESE : 2006 | SPECIFICATION FOR ROTARY DRILL STEM ELEMENTS |
API 17J REDLINE : 2008 | SPECIFICATION FOR UNBONDED FLEXIBLE PIPE |
PREN 13230-3 : DRAFT 2014 | RAILWAY APPLICATIONS - TRACK - CONCRETE SLEEPERS AND BEARERS - PART 3: TWIN-BLOCK REINFORCED SLEEPERS |
API 14A RUSSIAN : 2001 | SPECIFICATION FOR SUBSURFACE SAFETY VALVE EQUIPMENT |
API 19G3 : 2011 | RUNNING TOOLS, PULLING TOOLS, AND KICK-OVER TOOLS AND LATCHES FOR SIDE-POCKET MANDRELS |
ISO 10432:2004 | Petroleum and natural gas industries Downhole equipment Subsurface safety valve equipment |
I.S. EN 16482:2014 | FOUNDING - CONTINUOUS CAST IRON BARS |
ONORM EN ISO 11960 : 2014 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR USE AS CASING OR TUBING FOR WELLS (ISO 11960:2014) |
I.S. EN 15185:2011 | FLUESSIGGAS-GERAETE UND AUSRUESTUNGSTEILE - KENNZEICHNUNG VON FLASCHEN UND FAESSERN |
I.S. EN ISO 3266:2010 | FORGED STEEL EYEBOLTS GRADE 4 FOR GENERAL LIFTING PURPOSES (ISO 3266:2010) |
I.S. EN 438-2:2016 | HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 2: DETERMINATION OF PROPERTIES |
ISO 18172-1:2007 | Gas cylinders Refillable welded stainless steel cylinders Part 1: Test pressure 6 MPa and below |
UNI EN ISO 898-2 : 2012 | MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 2: NUTS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD |
I.S. EN ISO 17945:2015 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - METALLIC MATERIALS RESISTANT TO SULFIDE STRESS CRACKING IN CORROSIVE PETROLEUM REFINING ENVIRONMENTS (ISO 17945:2015) |
ISO 2415:2004 | Forged shackles for general lifting purposes — Dee shackles and bow shackles |
I.S. EN 13329:2016 | LAMINATE FLOOR COVERINGS - ELEMENTS WITH A SURFACE LAYER BASED ON AMINOPLASTIC THERMOSETTING RESINS - SPECIFICATIONS, REQUIREMENTS AND TEST METHODS |
BS EN 13310 : 2015 | KITCHEN SINKS - FUNCTIONAL REQUIREMENTS AND TEST METHODS |
PREN 10269 : DRAFT 2011 | STEELS AND NICKEL ALLOYS FOR FASTENERS WITH SPECIFIED ELEVATED AND/OR LOW TEMPERATURE PROPERTIES |
ISO 13584-511:2006 | Industrial automation systems and integration — Parts library — Part 511: Mechanical systems and components for general use — Reference dictionary for fasteners |
DIN EN ISO 9170-1 E : 2008 | TERMINAL UNITS FOR MEDICAL GAS PIPELINE SYSTEMS - PART 1: TERMINAL UNITS FOR USE WITH COMPRESSED MEDICAL GASES AND VACUUM |
UNE-EN 1562:2012 | Founding - Malleable cast irons |
ISO 16143-1:2014 | Stainless steels for general purposes Part 1: Corrosion-resistant flat products |
UNI EN 14811 : 2010 | RAILWAY APPLICATIONS - TRACK - SPECIAL PURPOSE RAIL - GROOVED AND ASSOCIATED CONSTRUCTION |
PREN 13674-2 : DRAFT 2016 | RAILWAY APPLICATIONS - TRACK - RAIL - PART 2: SWITCH AND CROSSING RAILS USED IN CONJUNCTION WITH VIGNOLE RAILWAY RAILS 46 KG/M AND ABOVE |
UNI EN 4700-001 : 2011 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 001: PLATE, SHEET AND STRIP |
ONORM EN 13601 : 2013 | COPPER AND COPPER ALLOYS - COPPER ROD, BAR AND WIRE FOR GENERAL ELECTRICAL PURPOSES |
ONORM EN 13605 : 2013 | COPPER AND COPPER ALLOYS - COPPER PROFILES AND PROFILED WIRE FOR ELECTRICAL PURPOSES |
UNE-EN 16124:2012 | Founding - Low-alloyed ferritic spheroidal graphite cast irons for elevated temperature applications |
ISO/TS 15869:2009 | Gaseous hydrogen and hydrogen blends Land vehicle fuel tanks |
EN 10083-3:2006/AC:2008 | STEELS FOR QUENCHING AND TEMPERING - PART 3: TECHNICAL DELIVERY CONDITIONS FOR ALLOY STEELS |
DIN EN 438-2:2016-06 | HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 2: DETERMINATION OF PROPERTIES |
ISO 7186:2011 | Ductile iron products for sewerage applications |
ISO 5003:2016 | Flat bottom (Vignole) railway rails 43 kg/m and above |
UNI EN 459-2 : 2010 | BUILDING LIME - PART 2: TEST METHODS |
DIN EN ISO 9170-1:2016-09 (Draft) | TERMINAL UNITS FOR MEDICAL GAS PIPELINE SYSTEMS - PART 1: TERMINAL UNITS FOR USE WITH COMPRESSED MEDICAL GASES AND VACUUM |
EN 14811:2006+A1:2009 | RAILWAY APPLICATIONS - TRACK - SPECIAL PURPOSE RAIL - GROOVED AND ASSOCIATED CONSTRUCTION |
EN 754-1:2016 | Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 1: Technical conditions for inspection and delivery |
PREN 10340-2 : DRAFT 2017 | STEEL CASTINGS FOR STRUCTURAL USES - PART 2: TECHNICAL DELIVERY CONDITIONS |
EN 13329:2016+A1:2017 | Laminate floor coverings - Elements with a surface layer based on aminoplastic thermosetting resins - Specifications, requirements and test methods |
PREN 1338 : DRAFT 2010 | CONCRETE PAVING BLOCKS - REQUIREMENTS AND TEST METHODS |
ISO 11515:2013 | Gas cylinders — Refillable composite reinforced tubes of water capacity between 450 L and 3000 L — Design, construction and testing |
ISO 4990:2015 | Steel castings — General technical delivery requirements |
ISO 16143-2:2014 | Stainless steels for general purposes Part 2: Corrosion-resistant semi-finished products, bars, rods and sections |
I.S. EN 13674-4:2006 | RAILWAY APPLICATIONS - TRACK - RAIL - PART 4: VIGNOLE RAILWAY RAILS FROM 27 KG/M TO, BUT EXCLUDING 46 KG/M |
ISO 4955:2016 | Heat-resistant steels |
I.S. EN 13674-2:2006 | RAILWAY APPLICATIONS - TRACK - RAIL - PART 2: SWITCH AND CROSSING RAILS USED IN CONJUNCTION WITH VIGNOLE RAILWAY RAILS 46 KG/M AND ABOVE |
ISO 4384-2:2011 | Plain bearings Hardness testing of bearing metals Part 2: Solid materials |
I.S. EN 4700-005:2010 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 005: FORGING STOCK |
API 7-1 : 2006/ADD 4 : 2019 | SPECIFICATION FOR ROTARY DRILL STEM ELEMENTS |
ISO 683-11:2012 | Heat-treatable steels, alloy steels and free-cutting steels Part 11: Case-hardening steels |
I.S. EN ISO 6506-2:2014 | METALLIC MATERIALS - BRINELL HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES (ISO 6506-2:2014) |
ONORM EN ISO 9809-3 : 2010 | GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 3: NORMALIZED STEEL CYLINDERS |
DIN EN 14653-2:2005-07 | MANUALLY OPERATED HYDRAULIC SHORING SYSTEMS FOR GROUNDWORK SUPPORT - PART 2: ASSESSMENT BY CALCULATION OR TEST |
DIN EN 485-1:2016-10 | ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
UNE-EN 10208-2:2011 | Steel pipes for pipelines for combustible fluids - Technical delivery conditions - Part 2: Pipes of requirement class B |
ONORM EN 459-2 : 2010 | BUILDING LIME - PART 2: TEST METHODS |
DIN EN 969:2009-07 | DUCTILE IRON PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS FOR GAS PIPELINES - REQUIREMENTS AND TEST METHODS |
DIN EN 459-2:2010-12 | Building lime - Part 2: Test methods |
DIN EN 10084:2008-06 | CASE HARDENING STEELS - TECHNICAL DELIVERY CONDITIONS |
DIN EN ISO 10692-1 E : 2003 | GAS CYLINDERS - GAS CYLINDER VALVE CONNECTIONS FOR USE IN THE MICROELECTRONIC INDUSTRY - PART 1: OUTLET CONNECTIONS |
DIN EN ISO 18265:2014-02 | METALLIC MATERIALS - CONVERSION OF HARDNESS VALUES (ISO 18265:2013) |
DIN EN 10085:2001-07 | Nitriding steels - Technical delivery conditions; English version of DIN EN 10085 |
DIN EN 10272:2016-10 | STAINLESS STEEL BARS FOR PRESSURE PURPOSES |
BS EN 12392:2016 | Aluminium and aluminium alloys. Wrought products and cast products. Special requirements for products intended for the production of pressure equipment |
BS EN 1564:2011 | Founding. Ausferritic spheroidal graphite cast irons |
BS EN 13605:2013 | Copper and copper alloys. Copper profiles and profiled wire for electrical purposes |
BS EN 14354:2017 | Wood-based panels. Wood veneer floor coverings |
BS EN 1559-2:2014 | Founding. Technical conditions of delivery Additional requirements for steel castings |
BS EN 12165:2011 | Copper and copper alloys. Wrought and unwrought forging stock |
BS EN ISO 10432:2004 | Petroleum and natural gas industries. Downhole equipment. Subsurface safety valve equipment |
BS EN 14394 : 2005 | HEATING BOILERS - HEATING BOILERS WITH FORCED DRAUGHT BURNERS - NOMINAL HEAT OUTPUT NOT EXCEEDING 10 MW AND MAXIMUM OPERATING TEMPERATURE OF 110 DEGREE C |
ISO 12679:2011 | Thermal spraying Recommendations for thermal spraying |
BS EN 1982:2017 | Copper and copper alloys. Ingots and castings |
BS EN ISO 13628-10:2006 | Petroleum and natural gas industries. Design and operation of subseaprod uction systems Specification for bonded flexible pipe |
BS EN ISO 15156-2:2015 | Petroleum and natural gas industries. Materials for use in H2S-containing environments in oil and gas production Cracking-resistant carbon and low alloy steels, and the use of cast irons |
BS EN 12513:2011 | Founding. Abrasion resistant cast irons |
UNE-EN ISO 3506-2:2010 | Mechanical properties of corrosion-resistant stainless steel fasteners - Part 2: Nuts (ISO 3506-2:2009) |
BS EN 10084 : 2008-06 | CASE HARDENING STEELS - TECHNICAL DELIVERY CONDITIONS |
BS EN 14359:2017 | Gas-loaded accumulators for fluid power applications |
BS EN ISO 5470-1:2016 | Rubber- or plastics-coated fabrics. Determination of abrasion resistance Taber abrader |
BS EN 755-1:2016 | Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles Technical conditions for inspection and delivery |
ISO 3266:2010 | Forged steel eyebolts grade 4 for general lifting purposes |
ISO 9170-2:2008 | Terminal units for medical gas pipeline systems — Part 2: Terminal units for anaesthetic gas scavenging systems |
BS EN ISO 4498:2010 | Sintered metal materials, excluding hardmetals. Determination of apparent hardness and microhardness |
BS EN 10331:2003 | Magnetic materials. Specification for sintered soft magnetic materials |
BS EN 13262 : 2004 | RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - WHEELS - PRODUCT REQUIREMENTS |
EN ISO 3506-1:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners - Part 1: Bolts, screws and studs (ISO 3506-1:2009) |
BS EN 485-1 : 2008 | ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
BS EN ISO 19054 : 2006 | RAIL SYSTEMS FOR SUPPORTING MEDICAL EQUIPMENT (ISO 19054:2005) |
UNE-EN 13601:2014 | Copper and copper alloys - Copper rod, bar and wire for general electrical purposes |
ISO 16070:2005 | Petroleum and natural gas industries Downhole equipment Lock mandrels and landing nipples |
I.S. EN ISO 3506-2:2009 | MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 2: NUTS |
BS EN 1561:2011 | Founding. Grey cast irons |
BS EN 10083-2:2006 | Steels for quenching and tempering Technical delivery conditions for non alloy steels |
BS EN ISO 15136-2:2006 | Petroleum and natural gas industries. Progressing cavity pump systems for artificial lift Surface drive systems |
ISO 898-1:2013 | Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread |
BS EN 13674-3 : 2006 | RAILWAY APPLICATIONS - TRACK - RAIL - PART 3: CHECK RAILS |
ISO 17078-2:2007 | Petroleum and natural gas industries — Drilling and production equipment — Part 2: Flow-control devices for side-pocket mandrels |
BS EN 14653-2:2005 | Manually operated hydraulic shoring systems for groundwork support Assessment by calculation or test |
UNE-EN 754-1:2016 | Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 1: Technical conditions for inspection and delivery |
ONORM EN ISO 9809-2 : 2010 | GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 2: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH GREATER THAN OR EQUAL TO 1100 MPA |
BS EN ISO 10424-1:2004 | Petroleum and natural gas industries. Rotary drilling equipment Rotary drill stem elements |
BS EN 1337-6:2004 | Structural bearings Rocker bearings |
BS EN 10218-1:2012 | Steel wire and wire products. General Test methods |
BS EN ISO 16070:2005 | Petroleum and natural gas industries. Downhole equipment. Lock mandrels and landing nipples |
UNE-EN 13230-3:2016 | Railway applications - Track - Concrete sleepers and bearers - Part 3: Twin-block reinforced sleepers |
UNE-EN ISO 6506-3:2015 | Metallic materials - Brinell hardness test - Part 3: Calibration of reference blocks (ISO 6506-3:2014) |
ISO 15136-2:2006 | Petroleum and natural gas industries — Progressing cavity pump systems for artificial lift — Part 2: Surface-drive systems |
BS EN 13748-2:2004 | Terrazzo tiles Terrazzo tiles for external use |
BS EN 10083-1:2006 | Steels for quenching and tempering General technical delivery conditions |
ISO 11118:2015 | Gas cylinders — Non-refillable metallic gas cylinders — Specification and test methods |
ISO 898-5:2012 | Mechanical properties of fasteners made of carbon steel and alloy steel Part 5: Set screws and similar threaded fasteners with specified hardness classes Coarse thread and fine pitch thread |
ISO 7795:2011 | Cross-country skis — Ski-binding screws — Test methods |
BS EN 10088-3:2014 | Stainless steels Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes |
ISO 9809-2:2010 | Gas cylinders Refillable seamless steel gas cylinders Design, construction and testing Part 2: Quenched and tempered steel cylinders with tensile strength greater than or equal to 1 100 MPa |
ISO 10692-1:2001 | Gas cylinders — Gas cylinder valve connections for use in the micro-electronics industry — Part 1: Outlet connections |
ISO 5470-1:2016 | Rubber- or plastics-coated fabrics Determination of abrasion resistance Part 1: Taber abrader |
UNE-EN 10269:2014 | Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties |
BS EN 12167:2011 | Copper and copper alloys. Profiles and bars for general purposes |
UNE-EN 13835:2012 | Founding - Austenitic cast irons |
ISO 4498:2010 | Sintered metal materials, excluding hardmetals Determination of apparent hardness and microhardness |
UNE-EN ISO 11439:2013 | Gas cylinders - High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles (ISO/FDIS 11439:2013) |
BS EN ISO 683-17:2014 | Heat-treated steels, alloy steels and free-cutting steels Ball and roller bearing steels |
ISO 7866:2012 | Gas cylinders — Refillable seamless aluminium alloy gas cylinders — Design, construction and testing |
IEC 61439-5:2014 | Low-voltage switchgear and controlgear assemblies - Part 5: Assemblies for power distribution in public networks |
ISO 9809-3:2010 | Gas cylinders Refillable seamless steel gas cylinders Design, construction and testing Part 3: Normalized steel cylinders |
ISO 14998:2013 | Petroleum and natural gas industries — Downhole equipment — Completion accessories |
ISO 14310:2008 | Petroleum and natural gas industries — Downhole equipment — Packers and bridge plugs |
ISO 11120:2015 | Gas cylinders Refillable seamless steel tubes of water capacity between 150 l and 3000 l Design, construction and testing |
BS EN 13230-3:2016 | Railway applications. Track. Concrete sleepers and bearers Twin-block reinforced sleepers |
ISO 9809-1:2010 | Gas cylinders Refillable seamless steel gas cylinders Design, construction and testing Part 1: Quenched and tempered steel cylinders with tensile strength less than 1 100 MPa |
ISO 15156-2:2015 | Petroleum and natural gas industries Materials for use in H2S-containing environments in oil and gas production Part 2: Cracking-resistant carbon and low-alloy steels, and the use of cast irons |
BS EN ISO 10692-1:2001 | Gas cylinders. Gas cylinder valve connections for use in the microelectronics industry Outlet connections |
ISO 13625:2002 | Petroleum and natural gas industries — Drilling and production equipment — Marine drilling riser couplings |
UNE-EN 13600:2014 | Copper and copper alloys - Seamless copper tubes for electrical purposes |
ISO 898-2:2012 | Mechanical properties of fasteners made of carbon steel and alloy steel — Part 2: Nuts with specified property classes — Coarse thread and fine pitch thread |
ISO 683-17:2014 | Heat-treated steels, alloy steels and free-cutting steels — Part 17: Ball and roller bearing steels |
BS EN ISO 17078-1 : 2004 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 1: SIDE-POCKET MANDRELS |
I.S. EN 1706:2010 | ALUMINIUM AND ALUMINIUM ALLOYS - CASTINGS - CHEMICAL COMPOSITION AND MECHANICAL PROPERTIES |
ISO 5182:2016 | Resistance welding Materials for electrodes and ancillary equipment |
UNE-EN ISO 3506-3:2010 | Mechanical properties of corrosion-resistant stainless steel fasteners - Part 3: Set screws and similar fasteners not under tensile stress (ISO 3506-3:2009) |
UNE-EN 12420:2015 | Copper and copper alloys - Forgings |
BS EN 13601:2013 | Copper and copper alloys. Copper rod, bar and wire for general electrical purposes |
UNE-EN ISO 18265:2014 | Metallic materials - Conversion of hardness values (ISO 18265:2013) |
I.S. EN ISO 3506-1:2009 | MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 1: BOLTS, SCREWS AND STUDS |
UNE-EN 14354:2017 | Wood-based panels - Wood veneer floor coverings |
UNE-EN 13262:2005 | Railway applications - Wheelsets and bogies - Wheels - Product requirement. |
UNE-EN 13329:2016 | Laminate floor coverings - Elements with a surface layer based on aminoplastic thermosetting resins - Specifications, requirements and test methods |
ISO 17078-3:2009 | Petroleum and natural gas industries Drilling and production equipment Part 3: Running tools, pulling tools and kick-over tools and latches for side-pocket mandrels |
BS EN 12164:2011 | Copper and copper alloys. Rod for free machining purposes |
ISO 19054:2005 | Rail systems for supporting medical equipment |
UNE-EN ISO 683-17:2015 | Heat-treated steels, alloy steels and free-cutting steels - Part 17: Ball and roller bearing steels (ISO 683-17:2014) |
BS EN 12020-1:2008 | Aluminium and aluminium alloys. Extruded precision profiles in alloys EN AW-6060 and EN AW-6063 Technical conditions for inspection and delivery |
BS EN 13604:2013 | Copper and copper alloys. Semiconductor devices, electronic and vacuum products made from high conductivity copper |
BS EN ISO 11120:2015 | Gas cylinders. Refillable seamless steel tubes of water capacity between 150 l and 3000 l. Design, construction and testing |
UNE-EN ISO 898-5:2013 | Mechanical properties of fasteners made of carbon steel and alloy steel - Part 5: Set screws and similar threaded fasteners with specified hardness classes - Coarse thread and fine pitch thread (ISO 898-5:2012) |
UNE-EN 10218-1:2012 | Steel wire and wire products - General - Part 1: Test methods |
BS EN 14688 : 2015 | SANITARY APPLIANCES - WASH BASINS - FUNCTIONAL REQUIREMENTS AND TEST METHODS |
EN ISO 3506-2:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners - Part 2: Nuts (ISO 3506-2:2009) |
EN ISO 11118 : 2015 COR 2015 | GAS CYLINDERS - NON-REFILLABLE METALLIC GAS CYLINDERS - SPECIFICATION AND TEST METHODS (ISO 11118:2015) |
UNE-EN ISO 7866:2013 | Gas cylinders - Refillable seamless aluminium alloy gas cylinders - Design, construction and testing (ISO 7866:2012) |
ISO 17078-1:2004 | Petroleum and natural gas industries — Drilling and production equipment — Part 1: Side-pocket mandrels |
BS EN 10085 : 2001-05 | NITRIDING STEEL - TECHNICAL DELIVERY CONDITIONS |
ISO 17945:2015 | Petroleum, petrochemical and natural gas industries Metallic materials resistant to sulfide stress cracking in corrosive petroleum refining environments |
BS EN ISO 11439:2013 | Gas cylinders. High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles |
ISO 13628-2:2006 | Petroleum and natural gas industries Design and operation of subsea production systems Part 2: Unbonded flexible pipe systems for subsea and marine applications |
ISO 6506-3:2014 | Metallic materials Brinell hardness test Part 3: Calibration of reference blocks |
UNE-EN 485-1:2017 | Aluminium and aluminium alloys - Sheet, strip and plate - Part 1: Technical conditions for inspection and delivery |
DIN EN 13835:2012-04 | FOUNDING - AUSTENITIC CAST IRONS |
DIN ISO 4384-1:2001-02 | PLAIN BEARINGS - HARDNESS TESTING OF BEARING METALS - PART 1: MULTILAYER BEARINGS MATERIALS (ISO 4384-1:2012) |
EN 15594:2009 | Railway applications - Track - Restoration of rails by electric arc welding |
UNI EN 12020-1 : 2008 | ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED PRECISION PROFILES IN ALLOYS EN AW-6060 AND EN AW-6063 - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
EN 755-1:2016 | Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 1: Technical conditions for inspection and delivery |
EN 14653-2:2005 | Manually operated hydraulic shoring systems for groundwork support - Part 2: Assessment by calculation or test |
EN 14359:2017 | Gas-loaded accumulators for fluid power applications |
EN ISO 17945:2015 | Petroleum, petrochemical and natural gas industries - Metallic materials resistant to sulfide stress cracking in corrosive petroleum refining environments (ISO 17945:2015) |
EN ISO 683-17:2014 | Heat-treated steels, alloy steels and free-cutting steels - Part 17: Ball and roller bearing steels (ISO 683-17:2014) |
EN 13835:2012 | Founding - Austenitic cast irons |
EN ISO 10424-1:2004 | Petroleum and natural gas industries - Rotary drilling equipment - Part 1: Rotary drill stem elements (ISO 10424-1:2004) |
EN 14394:2005+A1:2008 | Heating boilers - Heating boilers with forced draught burners - Nominal heat output not exceeding 10 MW and maximum operating temperature of 110 °C |
EN ISO 12679:2015 | Thermal spraying - Recommendations for thermal spraying (ISO 12679:2011) |
EN ISO 10692-1:2001 | Gas cylinders - Gas cylinder valve connections for use in the microelectronics industry - Part 1: Outlet connections (ISO 10692-1:2001) |
EN ISO 17078-3:2009 | Petroleum and natural gas industries - Drilling and production equipment - Part 3: Running tools, pulling tools and kick-over tools and latches for side-pocket mandrels (ISO 17078-3:2009) |
EN 14616:2004 | Thermal spraying - Recommendations for thermal spraying |
EN ISO 898-1:2013 | Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread (ISO 898-1:2013) |
EN 4700-005:2010 | Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 005: Forging stock |
EN 16668:2016+A1:2018 | Industrial valves - Requirements and testing for metallic valves as pressure accessories |
EN ISO 5182:2016 | RESISTANCE WELDING - MATERIALS FOR ELECTRODES AND ANCILLARY EQUIPMENT (ISO 5182:2016) |
EN 969:2009 | Ductile iron pipes, fittings, accessories and their joints for gas pipelines - Requirements and test methods |
EN 12020-1:2008 | Aluminium and aluminium alloys - Extruded precision profiles in alloys EN AW-6060 and EN AW-6063 - Part 1: Technical conditions for inspection and delivery |
EN 1564:2011 | Founding - Ausferritic spheroidal graphite cast irons |
EN 16451:2015 | Railway applications - Braking - Brake pad holder |
EN ISO 11120:2015 | Gas cylinders - Refillable seamless steel tubes of water capacity between 150 l and 3000 l - Design, construction and testing (ISO 11120:2015) |
EN 16602-70-46:2014 | Space product assurance - Requirements for manufacturing and procurement of threaded fasteners |
EN 13674-3:2006+A1:2010 | Railway applications - Track - Rail - Part 3: Check rails |
EN 4700-003:2010 | Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 003: Tube |
EN 13604:2013 | Copper and copper alloys - Semiconductor devices, electronic and vacuum products made from high conductivity copper |
UNI EN 10277-1 : 2008 | BRIGHT STEEL PRODUCTS - TECHNICAL DELIVERY CONDITIONS - PART 1: GENERAL |
EN ISO 18265:2013 | Metallic materials - Conversion of hardness values (ISO 18265:2013) |
EN 16124:2011 | Founding - Low-alloyed ferritic spheroidal graphite cast irons for elevated temperature applications |
EN ISO 4498:2010 | Sintered metal materials, excluding hardmetals - Determination of apparent hardness and microhardness (ISO 4498:2010) |
EN 13748-1:2004/A1:2005 | TERRAZZO TILES - PART 1: TERRAZZO TILES FOR INTERNAL USE |
EN ISO 14310:2008 | Petroleum and natural gas industries - Downhole equipment - Packers and bridge plugs (ISO 14310:2008) |
EN ISO 9809-1:2010 | Gas cylinders - Refillable seamless steel gas cylinders - Design, construction and testing - Part 1: Quenched and tempered steel cylinders with tensile strength less than 1 100 MPa (ISO 9809-1:2010) |
EN 14525:2004 | Ductile iron wide tolerance couplings and flange adaptors for use with pipes of different materials: ductile iron, Grey iron, Steel, PVC-U PE, Fibre-cement |
EN ISO 9809-3:2010 | Gas cylinders - Refillable seamless steel gas cylinders - Design, construction and testing - Part 3: Normalized steel cylinders (ISO 9809-3:2010) |
EN 4700-007:2010 | Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 007: Remelting stock |
EN 570:2007 | Aluminium and aluminium alloys - Impact extrusion slugs obtained from wrought products - Specification |
EN 14121:2009 | Aluminium and aluminium alloys - Sheet, strip and plate for electrotechnical applications |
EN ISO 3266:2010/A1:2015 | FORGED STEEL EYEBOLTS GRADE 4 FOR GENERAL LIFTING PURPOSES (ISO 3266:2010+A1:2015) |
EN 14200:2004 | Railway applications - Suspension components - Parabolic springs, steel |
EN ISO 9809-2:2010 | Gas cylinders - Refillable seamless steel gas cylinders - Design, construction and testing - Part 2: Quenched and tempered steel cylinders with tensile strength greater than or equal to 1 100 MPa (ISO 9809-2:2010) |
EN 16725:2016 | Railway applications - Track - Restoration and repair of manganese crossings |
EN 1559-1:2011 | Founding - Technical conditions of delivery - Part 1: General |
EN 12842:2012 | Ductile iron fittings for PVC-U or PE piping systems - Requirements and test methods |
EN 13674-1:2011+A1:2017 | Railway applications - Track - Rail - Part 1: Vignole railway rails 46 kg/m and above |
EN 16482:2014 | Founding - Continuous cast iron bars |
EN 598:2007+A1:2009 | Ductile iron pipes, fittings, accessories and their joints for sewerage applications - Requirements and test methods |
EN ISO 16070:2005 | Petroleum and natural gas industries - Downhole equipment - Lock mandrels and landing nipples (ISO 16070:2005) |
EN 13674-2:2006+A1:2010 | Railway applications - Track - Rail - Part 2: Switch and crossing rails used in conjunction with Vignole railway rails 46 kg/m and above |
EN 303-1:2017 | Heating boilers - Part 1: Heating boilers with forced draught burners - Terminology, general requirements, testing and marking |
EN 15566:2016 | Railway applications - Railway rolling stock - Draw gear and screw coupling |
EN ISO 14998:2013 | Petroleum and natural gas industries - Downhole equipment - Completion accessories (ISO 14998:2013) |
EN 16079:2011 | Founding - Compacted (vermicular) graphite cast irons |
EN ISO 9170-2:2008 | Terminal units for medical gas pipeline systems - Part 2: Terminal units for anaesthetic gas scavenging systems (ISO 9170-2:2008) |
EN ISO 17078-4:2010 | Petroleum and natural gas industries - Drilling and production equipment - Part 4: Practices for side-pocket mandrels and related equipment (ISO 17078-4:2010) |
EN ISO 15136-2:2006 | Petroleum and natural gas industries - Progressing cavity pump systems for artificial lift - Part 2: Surface-drive systems (ISO 15136-2:2006) |
EN 14730-1:2017 | Railway applications - Track - Aluminothermic welding of rails - Part 1: Approval of welding processes |
EN ISO 3506-3:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners - Part 3: Set screws and similar fasteners not under tensile stress (ISO 3506-3:2009) |
EN 4700-004:2010 | Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 004: Wire |
EN 4700-001:2010 | Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 001: Plate, sheet and strip |
EN ISO 13625:2002 | Petroleum and natural gas industries - Drilling and production equipment - Marine drilling riser couplings (ISO 13625:2002) |
EN ISO 5470-1:2016 | Rubber- or plastics-coated fabrics - Determination of abrasion resistance - Part 1: Taber abrader (ISO 5470-1:2016) |
EN ISO 898-5:2012 | Mechanical properties of fasteners made of carbon steel and alloy steel - Part 5: Set screws and similar threaded fasteners with specified hardness classes - Coarse thread and fine pitch thread (ISO 898-5:2012) |
EN 4700-006:2010 | Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 006: Pre-production and production forgings |
EN 16273:2014 | Railway applications - Track - Forged rail transitions |
ISO 6305-2:2007 | Railway components — Technical delivery requirements — Part 2: Non-alloy carbon steel baseplates |
I.S. EN 13310:2015 | KITCHEN SINKS - FUNCTIONAL REQUIREMENTS AND TEST METHODS |
BS ISO 4384-2:2011 | Plain bearings. Hardness testing of bearing metals Solid materials |
PREN 10253-2 : DRAFT 2017 | BUTT-WELDING PIPE FITTINGS - PART 2: NON ALLOY AND FERRITIC ALLOY STEELS WITH SPECIFIC INSPECTION REQUIREMENTS |
03/301625 DC : DRAFT JAN 2003 | BS EN ISO 10424-1 - PETROLEUM AND NATURAL GAS INDUSTRIES - ROTARY DRILLING EQUIPMENT - PART 1: SPECIFICATION FOR ROTARY DRILLING EQUIPMENT |
13/30252124 DC : 0 | BS ISO 13521 - AUSTENITIC MANGANESE STEEL CASTINGS |
UNI EN ISO 9015-1 : 2011 | DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS - HARDNESS TESTING - PART 1: HARDNESS TEST ON ARC WELDED JOINTS |
DIN 17750:2002-09 | Wrought nickel and nickel alloys sheet, plate and strip - Requirements and testing |
I.S. EN 10208-1:2009 | STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 1: PIPES OF REQUIREMENT CLASS A |
I.S. EN ISO 19054:2006 | RAIL SYSTEMS FOR SUPPORTING MEDICAL EQUIPMENT (ISO 19054:2005) |
04/300984 DC : DRAFT JAN 2004 | BS ISO 4955 - HEAT-RESISTING STEELS |
UNE-EN 15566:2017 | Railway applications - Railway rolling stock - Draw gear and screw coupling |
UNE-EN 16725:2017 | Railway applications - Track - Restoration and repair of manganese crossings |
ISO 13533:2001 | Petroleum and natural gas industries — Drilling and production equipment — Drill-through equipment |
EN ISO 11960:2014 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR USE AS CASING OR TUBING FOR WELLS (ISO 11960:2014) |
10/30237498 DC : DRAFT DEC 2010 | BS ISO 4384-1 - PLAIN BEARINGS - HARDNESS TESTING OF BEARING METALS - PART 1: MULTILAYER BEARINGS MATERIALS |
08/30146353 DC : DRAFT MAR 2008 | BS EN ISO 17078-4 - PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 4: PRACTICES FOR SIDE-POCKET MANDRELS AND RELATED EQUIPMENT |
14/30292479 DC : 0 | BS EN 13230-3 - RAILWAY APPLICATIONS - TRACK - CONCRETE SLEEPERS AND BEARERS - PART 3: TWIN-BLOCK REINFORCED SLEEPERS |
GOST R ISO 7206-10 : 2005 | IMPLANTS FOR SURGERY - PARTIAL AND TOTAL HIP-JOINT PROSTHESES - PART 10: DETERMINATION OF RESISTANCE TO STATIC LOAD OF MODULAR FEMORAL HEADS |
PREN 1563 : DRAFT 2015 | FOUNDING - SPHEROIDAL GRAPHITE CAST IRONS |
04/100677 DC : DRAFT JAN 2004 | ISO 16220 - MAGNESIUM AND MAGNESIUM ALLOYS - MAGNESIUM ALLOY INGOTS AND CASTINGS |
BS ISO 24338:2014 | Laminate floor coverings. Determination of abrasion resistance |
09/30185187 DC : 0 | BS ISO 7186 - DUCTILE IRON PRODUCTS FOR SEWAGE APPLICATIONS |
API 16A CHINESE : 2004 | SPECIFICATION FOR DRILL-THROUGH EQUIPMENT |
09/30196126 DC : 0 | BS ISO 11118 - GAS CYLINDERS - NON-REFILLABLE METALLIC GAS CYLINDERS - SPECIFICATION AND TEST METHODS |
UNE-EN 16079:2012 | Founding - Compacted (vermicular) graphite cast irons |
I.S. EN ISO 898-2:2012 | MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 2: NUTS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD (ISO 898-2:2012) |
I.S. EN 4700-003:2010 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 003: TUBE |
PREN 10088-3 : DRAFT 2011 | STAINLESS STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR SEMI-FINISHED PRODUCTS, BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
11/30254171 DC : 0 | BS EN 10088-2 - STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
DIN EN ISO 9170-2:2009-09 | TERMINAL UNITS FOR MEDICAL GAS PIPELINE SYSTEMS - PART 2: TERMINAL UNITS FOR ANAESTHETIC GAS SCAVENGING SYSTEMS |
DIN ISO 4498 E : 2005 | SINTERED METAL MATERIALS, EXCLUDING HARDMETALS - DETERMINATION OF APPARENT HARDNESS AND MICROHARDNESS |
BS ISO 11891:2012 | Hot formed helical compression springs. Technical specifications |
BS ISO 20703:2006 | Gas cylinders. Refillable welded aluminium-alloy cylinders. Design, construction and testing |
BS EN ISO 17945:2015 | Petroleum, petrochemical and natural gas industries. Metallic materials resistant to sulfide stress cracking in corrosive petroleum refining environments |
03/311760 DC : DRAFT JULY 2003 | ISO 10432 - PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - SUBSURFACE SAFETY VALVE EQUIPMENT |
ISO 683-14:2004 | Heat-treatable steels, alloy steels and free-cutting steels — Part 14: Hot-rolled steels for quenched and tempered springs |
BS EN 4700-007:2010 | Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Remelting stock |
ONORM EN ISO 7866 : 2014 | GAS CYLINDERS - REFILLABLE SEAMLESS ALUMINIUM ALLOY GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING (ISO 7866:2012 + COR 1:2014) |
DIN EN ISO 17945:2015-08 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - METALLIC MATERIALS RESISTANT TO SULFIDE STRESS CRACKING IN CORROSIVE PETROLEUM REFINING ENVIRONMENTS (ISO 17945:2015) |
BS EN 1563:2011 | Founding. Spheroidal graphite cast irons |
04/30076765 DC : DRAFT MAR 2004 | BS ISO 24338 - LAMINATE FLOOR COVERINGS - DETERMINATION OF ABRASION RESISTANCE |
DIN EN 16451 E : 2015 | RAILWAY APPLICATIONS - BRAKING - BRAKE PAD HOLDER |
DIN ISO 4384-2:2014-07 | PLAIN BEARINGS - HARDNESS TESTING OF BEARING METALS - PART 2: SOLID MATERIALS (ISO 4384-2:2011 |
DIN EN ISO 9809-2:2010-10 | GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 2: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH GREATER THAN OR EQUAL TO 1100 MPA |
16/30344411 DC : 0 | BS EN 14157 - NATURAL STONE TEST METHODS - DETERMINATION OF THE ABRASION RESISTANCE |
09/30143423 DC : DRAFT MAY 2009 | BS EN ISO 11120 - GAS CYLINDERS - REFILLABLE SEAMLESS STEEL TUBES OF WATER CAPACITY BETWEEN 150 L AND 3000 L - DESIGN CONSTRUCTION AND TESTING |
DIN EN 13674-2:2016-05 (Draft) | RAILWAY APPLICATIONS - TRACK - RAIL - PART 2: SWITCH AND CROSSING RAILS USED IN CONJUNCTION WITH VIGNOLE RAILWAY RAILS 46 KG/M AND ABOVE |
BS EN ISO 9170-1:2008 | Terminal units for medical gas pipeline systems Terminal units for use with compressed medical gases and vacuum |
BS ISO 12679 : 2011 | THERMAL SPRAYING - RECOMMENDATIONS FOR THERMAL SPRAYING |
10/30165712 DC : 0 | BS ISO 898-2 - MECHANICAL PROPERTIES OF FASTENERS - PART 2: NUTS WITH SPECIFIED PROOF LOAD VALUES; COARSE THREAD |
15/30315522 DC : 0 | BS ISO 4586-2 - HIGH-PRESSURE DECORATIVE LAMINATES (HPL, HPDL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 2: DETERMINATION OF PROPERTIES |
BIS IS 210 : 2009(R2014) | GREY IRON CASTINGS - SPECIFICATION |
EN 13605:2013 | Copper and copper alloys - Copper profiles and profiled wire for electrical purposes |
BS ISO 6336-5:2016 | Calculation of load capacity of spur and helical gears Strength and quality of materials |
08/30182457 DC : DRAFT JULY 2008 | BS EN 10208-2 - STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 2: PIPES OF REQUIREMENT CLASS B |
BS ISO 11515 : 2013 | GAS CYLINDERS - REFILLABLE COMPOSITE REINFORCED TUBES OF WATER CAPACITY BETWEEN 450 L AND 3000 L - DESIGN, CONSTRUCTION AND TESTING |
BS ISO 5182 : 2008 | RESISTANCE WELDING - MATERIALS FOR ELECTRODES AND ANCILLARY EQUIPMENT |
BS ISO 2531:2009 | Ductile iron pipes, fittings, accessories and their joints for water applications |
03/313799 DC : DRAFT AUG 2003 | ISO 11960 - PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR USE AS CASING OR TUBING FOR WELLS |
17/30348879 DC : 0 | BS ISO 1083 - SPHEROIDAL GRAPHITE CAST IRONS - CLASSIFICATION |
API 19G2 : 2010 | FLOW-CONTROL DEVICES FOR SIDE-POCKET MANDRELS |
EN 13601:2013 | Copper and copper alloys - Copper rod, bar and wire for general electrical purposes |
16/30258515 DC : 0 | BS EN 13674-4 - RAILWAY APPLICATIONS - TRACK - RAIL - PART 4: VIGNOLE RAILWAY RAILS FROM 27 KG/M TO, BUT EXCLUDING 46 KG/M |
API 20A : 2017 | CARBON STEEL, ALLOY STEEL, STAINLESS STEEL, AND NICKEL BASE ALLOY CASTINGS FOR USE IN THE PETROLEUM AND NATURAL GAS INDUSTRY |
06/30151815 DC : 0 | BS ISO 898-1 - MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 1: BOLTS, SCREWS AND STUDS |
05/30132598 DC : DRAFT APR 2005 | EN 10083-2 - STEELS FOR QUENCHING AND TEMPERING - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON ALLOYS STEELS |
04/30046456 DC : DRAFT MARCH 2004 | ISO 185 - GREY CAST IRON - CLASSIFICATION |
03/118501 DC : DRAFT NOV 2003 | ISO/DIS 17804 - FOUNDING - AUSFERRITIC SPHEROIDAL GRAPHITE CAST IRONS - CLASSIFICATION |
S.R. CEN/TS 15718:2011 | RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - PRODUCT REQUIREMENTS FOR CAST WHEELS |
DIN EN 16482:2014-09 | FOUNDING - CONTINUOUS CAST IRON BARS |
UNI EN ISO 9809-2 : 2010 | GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 2: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH GREATER THAN OR EQUAL TO 1100 MPA |
EN 12449:2016 | Copper and copper alloys - Seamless, round tubes for general purposes |
EN 459-2:2010 | Building lime - Part 2: Test methods |
UNE-EN 15594:2010 | Railway applications - Track - Restoration of rails by electric arc welding |
API SPEC 19AC : 2016 | SPECIFICATION FOR COMPLETION ACCESSORIES |
PREN 4700-002 : 200P3 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 002: BAR AND SECTION |
API 16A : 2017 : INC : ERR 1+ERR2+ADD1 : 2018 | SPECIFICATION FOR DRILL-THROUGH EQUIPMENT |
ISO 3522:2007 | Aluminium and aluminium alloys Castings Chemical composition and mechanical properties |
I.S. EN 15594:2009 | RAILWAY APPLICATIONS - TRACK - RESTORATION OF RAILS BY ELECTRIC ARC WELDING |
ISO 4586-2:2015 | High-pressure decorative laminates (HPL, HPDL) Sheets based on thermosetting resins (Usually called Laminates) Part 2: Determination of properties |
I.S. EN 16451:2015 | RAILWAY APPLICATIONS - BRAKING - BRAKE PAD HOLDER |
BIS IS 1500-3 : 2013 | METALLIC MATERIALS - BRINELL HARDNESS TEST - PART 3: CALIBRATION OF REFERENCE BLOCKS |
UNE-EN 14653-2:2012 | Manually operated hydraulic shoring systems for groundwork support - Part 2: Assessment by calculation or test |
PREN 1559-1 : DRAFT 2009 | FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 1: GENERAL |
I.S. EN 16668:2016 | INDUSTRIAL VALVES - REQUIREMENTS AND TESTING FOR METALLIC VALVES AS PRESSURE ACCESSORIES |
ISO 16112:2017 | Compacted (vermicular) graphite cast irons — Classification |
ISO 7689:2008 | Aerospace Bolts, with MJ threads, made of alloy steel, strength class 1 100 MPa Procurement specification |
I.S. EN 4700-004:2010 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 004: WIRE |
ONORM EN 303-5 : 2012 | HEATING BOILERS - PART 5: HEATING BOILERS FOR SOLID FUELS, MANUALLY AND AUTOMATICALLY STOKED, NOMINAL HEAT OUTPUT OF UP TO 500 KW - TERMINOLOGY, REQUIREMENTS, TESTING AND MARKING |
17/30359853 DC : 0 | BS EN 17142 - MODULAR MULTILAYER FLOOR COVERINGS - ELEMENTS WITH A WOOD POWDER BASED SURFACE LAYER - SPECIFICATIONS, REQUIREMENTS AND TEST METHODS |
16/30258472 DC : 0 | BS EN 14811 - RAILWAY APPLICATIONS - TRACK - SPECIAL PURPOSE RAIL - GROOVED AND ASSOCIATED CONSTRUCTION |
17/30353548 DC : 0 | BS EN 10277 - BRIGHT STEEL PRODUCTS - TECHNICAL DELIVERY CONDITIONS |
UNI EN 10088-4 : 2009 | STAINLESS STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR CONSTRUCTION PURPOSES |
17/30362692 DC : 0 | BS EN 598 - COATED AND LINED DUCTILE IRON PIPES, FITTINGS AND THEIR JOINTS FOR SEWERAGE AND DRAINAGE APPLICATIONS - PRODUCTS CHARACTERISTICS AND TEST AND ASSESSMENT METHODS |
ASTM F 3184 : 2016 | Standard Specification for Additive Manufacturing Stainless Steel Alloy (UNS S31603) with Powder Bed Fusion |
UNE-EN 14917:2011 | Metal bellows expansion joints for pressure applications |
ASTM A 1058 : 2014 : REDLINE | Standard Test Methods for Mechanical Testing of Steel Products—Metric |
ASTM F 3318 : 2018 | Standard for Additive Manufacturing – Finished Part Properties – Specification for AlSi10Mg with Powder Bed Fusion – Laser Beam |
I.S. EN ISO 11961:2008 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL DRILL PIPE |
ISO 185:2005 | Grey cast irons Classification |
ONORM EN 13674-2 : 2012 | RAILWAY APPLICATIONS - TRACK - RAIL - PART 2: SWITCH AND CROSSING RAILS USED IN CONJUNCTION WITH VIGNOLE RAILWAY RAILS 46 KG/M AND ABOVE |
DIN EN 1561:2012-01 | Founding - Grey cast irons; German version EN 1561:2011 |
I.S. EN 10088-4:2009 | STAINLESS STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR CONSTRUCTION PURPOSES |
I.S. EN 10083-3:2006 | STEELS FOR QUENCHING AND TEMPERING - PART 3: TECHNICAL DELIVERY CONDITIONS FOR ALLOY STEELS |
UNE-EN 13310:2016 | Kitchen sinks - Functional requirements and test methods |
EN ISO 17078-2:2007/AC:2009 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 2: FLOW-CONTROL DEVICES FOR SIDE-POCKET MANDRELS |
ONORM EN ISO 9809-1 : 2010 | GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 1: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH LESS THAN 1100 MPA |
ISO 3506-1:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners Part 1: Bolts, screws and studs |
EN ISO 13533:2001/AC:2006 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - DRILL-THROUGH EQUIPMENT |
EN ISO 17078-1:2004/A1:2010 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 1: SIDE-POCKET MANDRELS |
ISO 3506-3:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners Part 3: Set screws and similar fasteners not under tensile stress |
DIN EN 13674-3:2010-12 | Railway applications - Track - Rail - Part 3: Check rails (includes Amendment A1:2010) |
DIN EN 13601:2013-09 | Copper and copper alloys - Copper rod, bar and wire for general electrical purposes |
DIN EN 12020-1:2008-06 | Aluminium and aluminium alloys - Extruded precision profiles in alloys EN AW-6060 and EN AW-6063 - Part 1: Technical conditions for inspection and delivery |
DIN EN 14354 E : 2017 | WOOD-BASED PANELS - WOOD VENEER FLOOR COVERINGS |
DIN EN ISO 19054 E : 2017 | RAIL SYSTEMS FOR SUPPORTING MEDICAL EQUIPMENT (ISO 19054:2005 + AMD1:2016) |
DIN EN 10083-1 E : 2006 | STEELS FOR QUENCHING AND TEMPERING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
DIN EN 13600:2013-09 | Copper and copper alloys - Seamless copper tubes for electrical purposes; German version EN 13600:2013 |
DIN EN 1337-6 E : 2004 | STRUCTURAL BEARINGS - PART 6: ROCKER BEARINGS |
CSA B51 : 2014 | BOILER, PRESSURE VESSEL, AND PRESSURE PIPING CODE |
BS EN 10297-1:2003 | Seamless circular steel tubes for mechanical and general engineering purposes. Technical delivery conditions Non-alloy and alloy steel tubes |
BS EN 10269:2013 | Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties |
BS EN 10208-1:2009 | Steel pipes for pipelines for combustible fluids. Technical delivery conditions Pipes of requirement class A |
UNE-EN ISO 5470-1:2017 | Rubber- or plastics-coated fabrics - Determination of abrasion resistance - Part 1: Taber abrader (ISO 5470-1:2016) |
BS EN 10088-2:2014 | Stainless steels Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes |
ISO 10424-1:2004 | Petroleum and natural gas industries Rotary drilling equipment Part 1: Rotary drill stem elements |
ISO 13628-10:2005 | Petroleum and natural gas industries — Design and operation of subsea production systems — Part 10: Specification for bonded flexible pipe |
ISO 11439:2013 | Gas cylinders — High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles |
UNE-EN 1561:2012 | Founding - Grey cast irons |
BS EN 12811-3:2002 | Temporary works equipment Load testing |
BS EN ISO 6506-3:2014 | Metallic materials. Brinell hardness test Calibration of reference blocks |
BS EN 1337-4:2004 | Structural bearings Roller bearings |
BS EN 12842:2012 | Ductile iron fittings for PVC-U or PE piping systems. Requirements and test methods |
BS EN ISO 13533:2002 | Petroleum and natural gas industries. Drilling and production equipment. Drill-through equipment |
BS EN ISO 18265:2013 | Metallic materials. Conversion of hardness values |
UNE-EN 303-5:2013 | Heating boilers - Part 5: Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW - Terminology, requirements, testing and marking |
BS EN 14121:2009 | Aluminium and aluminium alloys. Sheet, strip and plate for electrotechnical applications |
BS EN ISO 13625:2002 | Petroleum and natural gas industries. Drilling and production equipment. Marine drilling riser couplings |
BS EN 570:2007 | Aluminium and aluminium alloys. Impact extrusion slugs obtained from wrought products. Specification |
BS EN 10277-1:2008 | Bright steel products. Technical delivery conditions General |
BS EN 303-1:2017 | Heating boilers Heating boilers with forced draught burners. Terminology, general requirements, testing and marking |
BS EN ISO 898-5:2012 | Mechanical properties of fasteners made of carbon steel and alloy steel Set screws and similar threaded fasteners with specified hardness classes. Coarse thread and fine pitch thread |
DIN EN 14772:2005-04 | Flanges and their joints - Quality assurance inspection and testing of gaskets in accordance with the series of standards EN 1514 and EN 12560 |
EN 10084:2008 | Case hardening steels - Technical delivery conditions |
DIN EN ISO 10692-1:2003-04 | GAS CYLINDERS - GAS CYLINDER VALVE CONNECTIONS FOR USE IN THE MICROELECTRONIC INDUSTRY - PART 1: OUTLET CONNECTIONS |
UNI EN ISO 11439 : 2013 | GAS CYLINDERS - HIGH PRESSURE CYLINDERS FOR THE ON-BOARD STORAGE OF NATURAL GAS AS A FUEL FOR AUTOMOTIVE VEHICLES |
DIN EN 14525:2005-02 | Ductile iron wide tolerance couplings and flange adaptors for use with pipes of different materials: Ductile iron, grey iron, steel, PVC-U, PE, fibre-cement |
EN 60439-5:2006 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 5: PARTICULAR REQUIREMENTS FOR ASSEMBLIES FOR POWER DISTRIBUTION IN PUBLIC NETWORKS |
EN 61439-5:2015/AC:2015 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 5: ASSEMBLIES FOR POWER DISTRIBUTION IN PUBLIC NETWORKS (IEC 61439-5:2014) |
EN 12811-3:2002 | Temporary works equipment - Part 3: Load testing |
EN 10088-5:2009 | Stainless steels - Part 5: Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes |
EN 10208-2:2009 | Steel pipes for pipelines for combustible fluids - Technical delivery conditions - Part 2: Pipes of requirement class B |
I.S. EN ISO 17078-1:2005 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 1: SIDE-POCKET MANDRELS |
EN 10349:2009 | Steel castings - Austenitic manganese steel castings |
DIN EN 14121:2009-09 | ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE FOR ELECTROTECHNICAL APPLICATIONS |
DIN EN 545:2011-09 | Ductile iron pipes, fittings, accessories and their joints for water pipelines - Requirements and test methods |
DIN EN 13674-2:2011-01 | RAILWAY APPLICATIONS - TRACK - RAIL - PART 2: SWITCH AND CROSSING RAILS USED IN CONJUNCTION WITH VIGNOLE RAILWAY RAILS 46 KG/M AND ABOVE |
DIN EN 570:2007-04 | Aluminium and aluminium alloys - Impact extrusion slugs obtained from wrought products - Specification |
I.S. EN ISO 13533:2002 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - DRILL-THROUGH EQUIPMENT |
DIN EN 14730-1:2010-12 | RAILWAY APPLICATIONS - TRACK - ALUMINOTHERMIC WELDING OF RAILS - PART 1: APPROVAL OF WELDING PROCESSES |
DIN EN 14359:2017-09 | GAS-LOADED ACCUMULATORS FOR FLUID POWER APPLICATIONS |
DIN EN ISO 898-2:2012-08 | Mechanical properties of fasteners made of carbon steel and alloy steel - Part 2: Nuts with specified property classes - Coarse thread and fine pitch thread (ISO 898-2:2012) |
DIN EN 14354:2017-11 | WOOD-BASED PANELS - WOOD VENEER FLOOR COVERINGS |
ONORM EN 16079 : 2012 | FOUNDING - COMPACTED (VERMICULAR) GRAPHITE CAST IRONS |
ONORM EN 1561 : 2011 | FOUNDING - GREY CAST IRONS |
UNE-EN 13674-2:2007 | Railway applications - Track - Rail - Part 2: Switch and crossing rails used in conjunction with Vignole railway rails 46 kg/m and above |
ONORM EN ISO 683-17 : 2015 | HEAT-TREATED STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 17: BALL AND ROLLER BEARING STEELS (ISO 683-17:2014) |
UNE-EN 13674-3:2007 | Railway applications - Track - Rail - Part 3: Check rails |
ONORM EN 15185 : 2011 | FURNITURE - ASSESSMENT OF THE SURFACE RESISTANCE TO ABRASION |
ISO 6506-3:2014 | Metallic materials Brinell hardness test Part 3: Calibration of reference blocks |
ISO 6506-2:2014 | Metallic materials Brinell hardness test Part 2: Verification and calibration of testing machines |
ISO 6506-4:2014 | Metallic materials — Brinell hardness test — Part 4: Table of hardness values |
ISO 18265:2013 | Metallic materials — Conversion of hardness values |
ISO/IEC Guide 98-3:2008 | Uncertainty of measurement — Part 3: Guide to the expression of uncertainty in measurement (GUM:1995) |
ISO 4498:2010 | Sintered metal materials, excluding hardmetals Determination of apparent hardness and microhardness |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.