ISO 68-1:1998
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
ISO general purpose screw threads — Basic profile — Part 1: Metric screw threads
Amended by
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Superseded date
10-05-2023
Language(s)
French, English
Published date
12-20-1998
This part of ISO 68 specifies the basic profile for ISO general purpose metric screw threads (M).
| Committee |
ISO/TC 1
|
| DevelopmentNote |
Together with ISO 68-2 supersedes ISO 68. (12/2003) NEW CHILD AMD 1 IS ADDED NOW
|
| DocumentType |
Standard
|
| Pages |
3
|
| ProductNote |
NEW CHILD AMD 1 IS ADDED NOW
|
| PublisherName |
International Organization for Standardization
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| DS ISO 68-1 : 1999 | Identical |
| JIS B 0205-1:2001 | Identical |
| UNI ISO 68-1:2022 | Identical |
| NEN ISO 68-1 : 1999 | Identical |
| UNE 17701:2002 | Identical |
| SANS 1700-2-1 : 1ED 2003(R2014) | Identical |
| BIS IS 4218-1 : 2001 | Identical |
| SS-ISO 68-1:2003 | Identical |
| DIN ISO 68-1 E : 1999 | Identical |
| NF ISO 68-1 : 1999 | Identical |
| BS ISO 68-1:1998 | Identical |
| PN ISO 68-1 : 2000 | Identical |
| JIS B 0205-2:2001 | Identical |
| DIN ISO 68-1:1999-11 | Identical |
| ISO 17447-2:2015 | Road Vehicles Glow-plugs with conical seating and their cylinder head housing Part 2: Basic characteristics and dimensions for ceramic-sheath-type glow-plugs |
| 14/30304674 DC : 0 | BS ISO 10958-2 - SNOWBOARDS - BINDING MOUNTING AREA - PART 2: REQUIREMENTS AND TEST METHODS FOR SNOWBOARDS WITH INSERTS |
| CEI EN 61056-2 : 2014 | GENERAL PURPOSE LEAD-ACID BATTERIES (VALVE-REGULATED TYPES) - PART 2: DIMENSIONS, TERMINALS AND MARKING |
| BS ISO 17447-1:2015 | Road Vehicles. Glow-plugs with conical seating and their cylinder head housing Basic characteristics and dimensions for metal-sheath-type glow-plugs |
| NF ISO 4144 : 2009 | PIPEWORK - STAINLESS STEEL FITTINGS THREADED IN ACCORDANCE WITH ISO 7-1 |
| DIN 13-5:1999-11 | ISO general purpose metric screw threads - Part 5: Nominal sizes for 1 mm and 1,25 mm fine pitch threads; nominal diameter from 7,5 mm to 200 mm |
| DIN ISO 261:1999-11 | ISO general purpose metric screw threads - General plan (ISO 261:1998) |
| 09/30193293 DC : DRAFT MAR 2009 | BS EN 12184 - ELECTRICALLY POWERED WHEELCHAIRS, SCOOTERS AND THEIR CHARGERS - REQUIREMENTS AND TEST METHODS |
| ASTM F 3030 : 2013 | Standard Test Method for Snowboards with a Channel-Mounting System and Removable Inserts |
| 16/30332774 DC : 0 | BS EN ISO 11363-1 - GAS CYLINDERS - 17E AND 25E TAPER THREADS FOR CONNECTION OF VALVES TO GAS CYLINDERS - PART 1: SPECIFICATIONS |
| 17/30369678 DC : 0 | PREN 7010 - AEROSPACE SERIES - USER GUIDE FOR CREATION AND DESIGNATION OF BOLTS |
| 03/318786 DC : DRAFT NOV 2003 | EN 14831 - FASTENERS - TIGHTENING PERFORMANCE - TORQUE/ANGLE SIMPLIFIED TEST METHOD |
| 05/30135570 DC : DRAFT NOV 2005 | ISO 2705 - ROAD VEHICLES - M12 X 1,25 SPARK PLUGS WITH FLAT SEATING AND THEIR CYLINDER HEAD HOUSINGS |
| DIN 13-10:1999-11 | ISO general purpose metric screw threads - Part 10: Nominal sizes for 6 mm fine pitch threads; nominal diameter from 70 mm to 500 mm |
| BS ISO 28741:2013 | Road vehicles. Spark-plugs and their cylinder head housings. Basic characteristics and dimensions |
| BS ISO 2346:2001 | Road vehicles. M14 x 1,25 compact spark-plugs with flat seating and 19 mm hexagon and their cylinder head housing |
| BS ISO 19812:2006 | Road vehicles. M10 x 1 compact spark-plugs with flat seating and 16 mm hexagon and their cylinder head housings |
| 06/30151815 DC : 0 | BS ISO 898-1 - MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 1: BOLTS, SCREWS AND STUDS |
| BS ISO 22977:2005 | Road vehicles. M12 x 1,25 spark-plugs with flat seating and 14 mm bi-hexagon and their cylinder head housing |
| I.S. EN ISO 898-2:2012 | MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 2: NUTS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD (ISO 898-2:2012) |
| MIL-DTL-32546 Base Document:2016 | Connectors, Electrical, Circular, for High-Speed Data Bus Transmission, Copper Conductor, General Specification for |
| 13/30277311 DC : 0 | BS ISO 17447-2 - ROAD VEHICLES - GLOW-PLUGS WITH CONICAL SEATING AND THEIR CYLINDER HEAD HOUSING - PART 2: BASIC CHARACTERISTICS AND DIMENSIONS FOR CERAMIC-SHEATH-TYPE GLOW-PLUGS |
| DIN ISO 6696:2016-07 | Cycles - Screw threads used in bottom bracket assemblies (ISO 6696:1989) |
| BS ISO 5145:2017 | Gas cylinders. Cylinder valve outlets for gases and gas mixtures. Selection and dimensioning |
| 04/30107378 DC : DRAFT JUL 2004 | EN 12184 - ELECTRICALLY POWERED WHEELCHAIRS, SCOOTERS AND THEIR CHARGERS - REQUIREMENTS AND TEST METHODS |
| NF ISO 9270-2 : 2010 | 7/24 TAPER FOR SPINDLE NOSES FOR AUTOMATIC TOOL CHANGERS - PART 2: DIMENSIONS AND DESIGNATION OF SPINDLE NOSES OF FORMS J AND JF |
| CSA 4.6 : 2007 : INC : ADD A : 2010 : R2012 | AUTOMATIC GAS SHUTOFF DEVICES FOR HOT WATER SUPPLY SYSTEMS |
| ANSI Z21.87 : 2007 : R2012 | AUTOMATIC GAS SHUTOFF DEVICES FOR HOT WATER SUPPLY SYSTEMS |
| AAMI HE75 : 2009(R2013) | HUMAN FACTORS ENGINEERING - DESIGN OF MEDICAL DEVICES |
| BIS IS 12427 : 2001 | FASTENERS - THREADED STEEL FASTENERS - HEXAGON HEAD TRANSMISSION TOWER BOLTS - SPECIFICATION |
| I.S. EN 61056-2:2012 | GENERAL PURPOSE LEAD-ACID BATTERIES (VALVE-REGULATED TYPES) - PART 2: DIMENSIONS, TERMINALS AND MARKING (IEC 61056-2:2012 (EQV) + CORRIGENDUM OCT. 2012 (EQV)) |
| BS EN ISO 16047 : 2005 | FASTENERS - TORQUE/CLAMP FORCE TESTING |
| I.S. EN ISO 16047:2005 | FASTENERS - TORQUE/CLAMP FORCE TESTING (ISO 16047:2005) |
| BS EN 61056-2:2012 | General purpose lead-acid batteries (valve-regulated types) Dimensions, terminals and marking |
| ONORM EN ISO 15245-1 : 2013 | GAS CYLINDERS - PARALLEL THREADS FOR CONNECTION OF VALVES TO GAS CYLINDERS - PART 1: SPECIFICATION (ISO 15245-1:2001 + AMD 1:2013) |
| ISO 4144:2003 | Pipework Stainless steel fittings threaded in accordance with ISO 7-1 |
| DIN EN 12183:2014-06 | Manual wheelchairs - Requirements and test methods |
| BIS IS 4218-3 : 1999 AMD 1 2012 | ISO GENERAL PURPOSE METRIC SCREW THREADS - PART 3: BASIC DIMENSIONS |
| UNI EN 12183 : 2014 | MANUAL WHEELCHAIRS - REQUIREMENTS AND TEST METHODS |
| EN 15202:2012 | LPG equipment and accessories - Essential operational dimensions for LPG cylinder valve outlet and associated equipment connections |
| ISO 14134:2006 | Optics and optical instruments Specifications for astronomical telescopes |
| I.S. EN 15202:2012 | LPG EQUIPMENT AND ACCESSORIES - ESSENTIAL OPERATIONAL DIMENSIONS FOR LPG CYLINDER VALVE OUTLET AND ASSOCIATED EQUIPMENT CONNECTIONS |
| I.S. EN 3645-001:2015 | AEROSPACE SERIES - CONNECTORS, ELECTRICAL, CIRCULAR, SCOOP-PROOF, TRIPLE START THREADED COUPLING, OPERATING TEMPERATURE 175 DEGREES C OR 200 DEGREES C CONTINUOUS - PART 001: TECHNICAL SPECIFICATION |
| UNE-EN ISO 898-1:2015 | Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread (ISO 898-1:2013) |
| BS EN 15202:2012 | LPG equipment and accessories. Essential operational dimensions for LPG cylinder valve outlet and associated equipment connections |
| BS EN ISO 3506-3:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners Set screws and similar fasteners not under tensile stress |
| ISO 3506-2:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners Part 2: Nuts |
| I.S. EN 60423:2007 | CONDUIT SYSTEMS FOR CABLE MANAGEMENT - OUTSIDE DIAMETERS OF CONDUITS FOR ELECTRICAL INSTALLATIONS AND THREADS FOR CONDUITS AND FITTINGS |
| DIN ISO 965-1:1999-11 | ISO GENERAL PURPOSE METRIC SCREW THREADS - TOLERANCES - PART 1: PRINCIPLES AND BASIC DATA (ISO 965-1:2013) |
| EN 61056-2:2012 | General purpose lead-acid batteries (valve-regulated types) - Part 2: Dimensions, terminals and marking |
| EN 60423:2007 | Conduit systems for cable management - Outside diameters of conduits for electrical installations and threads for conduits and fittings |
| DIN EN ISO 11363-1:2012-06 | GAS CYLINDERS - 17E AND 25E TAPER THREADS FOR CONNECTION OF VALVES TO GAS CYLINDERS - PART 1: SPECIFICATIONS (ISO 11363-1:2010 + COR. 2:2012) |
| 10/30165716 DC : 0 | BS ISO 898-6 - MECHANICAL PROPERTIES OF FASTENERS - PART 6: NUTS WITH SPECIFIED PROOF LOAD VALUES - FINE PITCH THREAD |
| I.S. EN 12183:2014 | MANUAL WHEELCHAIRS - REQUIREMENTS AND TEST METHODS |
| BS ISO 2705:2006 | Road vehicles. M12 x 1,25 spark plugs with flat seating and their cylinder head housings |
| 16/30353142 DC : 0 | BS EN 3645-001 - AEROSPACE SERIES - CONNECTORS, ELECTRICAL, CIRCULAR, SCOOP-PROOF, TRIPLE START THREADED COUPLING, OPERATING TEMPERATURE 175 DEGRES C OR 200 DEGRES C CONTINUOUS - PART 001: TECHNICAL SPECIFICATION |
| DIN ISO 965-2:1999-11 | ISO GENERAL PURPOSE METRIC SCREW THREADS - TOLERANCES - PART 2: LIMITS OF SIZES FOR GENERAL PURPOSE EXTERNAL AND INTERNAL SCREW THREADS - MEDIUM QUALITY |
| DIN 13-1:1999-11 | ISO general purpose metric screw threads - Part 1: Nominal sizes for coarse pitch threads; nominal diameter from 1 mm to 68 mm |
| DIN EN ISO 9873:2016-03 (Draft) | DENTISTRY - INTRA-ORAL MIRRORS (ISO 9873:2017) |
| DIN EN ISO 11363-1:2016-04 (Draft) | GAS CYLINDERS - 17E AND 25E TAPER THREADS FOR CONNECTION OF VALVES TO GAS CYLINDERS - PART 1: SPECIFICATIONS (ISO 11363-1:2010 + COR. 2:2012) |
| BS ISO 13948-1:2015 | Diesel engines. Fuel injection pumps and fuel injector low-pressure connections Threaded connections |
| BS ISO 2344:1998 | Road vehicles. M14 x 1,25 spark plugs with conical seating and their cylinder head housings |
| 12/30236938 DC : 0 | BS ISO 28741 - ROAD VEHICLES - SPARK-PLUGS AND THEIR CYLINDER HEAD HOUSINGS - BASIC CHARACTERISTICS AND DIMENSIONS |
| 17/30362705 DC : 0 | BS EN 15202 - LPG EQUIPMENT AND ACCESSORIES - ESSENTIAL OPERATIONAL DIMENSIONS FOR LPG CYLINDER VALVE OUTLET AND ASSOCIATED EQUIPMENT CONNECTIONS |
| 12/30264722 DC : 0 | BS ISO 965-1 - ISO GENERAL-PURPOSE METRIC SCREW THREADS - TOLERANCES - PART 1: PRINCIPLES AND BASIC DATA |
| BS ISO 965-5:1998 | ISO general purpose metric screw threads. Tolerances Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing |
| BS ISO 10958-2:2015 | Snowboards. Binding mounting area Requirements and test methods for snowboards with inserts |
| 08/30184358 DC : 0 | BS ISO 9270-1 - 7/24 TAPER SPINDLE NOSES FOR AUTOMATIC TOOL CHANGERS - PART 1: DIMENSIONS AND DESIGNATION OF SPINDLE NOSES OF FORMS S AND SF |
| BS ISO 261:1998 | ISO general purpose metric screw threads. General plan |
| ISO 8470:2006 | Road vehicles M14 x 1,25 spark-plugs with flat seating and 16 mm hexagon and their cylinder head housings |
| 08/30184361 DC : 0 | BS ISO 9270-2 - 7/24 TAPERS FOR SPINDLE NOSES FOR AUTOMATIC TOOL CHANGERS - PART 2 - DIMENSIONS AND DESIGNATION OF SPINDLE NOSES OF FORMS J AND JF |
| BS ISO 14134:2006 | Optics and optical instruments. Specifications for astronomical telescopes |
| MIL-DTL-38999 Revision M:2015 | Connectors, Electrical, Circular, Miniature, High Density, Quick Disconnect (Bayonet, Threaded or Breech Coupling), Environment Resistant with Crimp Removable Contacts or Hermetically Sealed with Fixed, Solderable Contacts, General Specification for |
| PREN 12183 : DRAFT 2004 | MANUAL WHEELCHAIRS - REQUIREMENTS AND TEST METHODS |
| CSA 4.6 : 2007 : INC : ADD A : 2010 : R2016 | AUTOMATIC GAS SHUTOFF DEVICES FOR HOT WATER SUPPLY SYSTEMS |
| ISO 8789:2009 | Rubber hoses and hose assemblies for liquefied petroleum gas in motor vehicles Specification |
| ANSI Z21.87 : 2007 : INC : ADD A : 2010 : R2012 | AUTOMATIC GAS SHUTOFF DEVICES FOR HOT WATER SUPPLY SYSTEMS |
| ISO 9873:2017 | Dentistry Intra-oral mirrors |
| ISO 11363-1:2018 | Gas cylinders — 17E and 25E taper threads for connection of valves to gas cylinders — Part 1: Specifications |
| ISO 2705:2006 | Road vehicles M12 x 1,25 spark-plugs with flat seating and their cylinder head housings |
| I.S. EN ISO 9873:2017 | DENTISTRY - INTRA-ORAL MIRRORS (ISO 9873:2017) |
| SAE J 518/3 : 2015 | HYDRAULIC FLANGE CLAMPS, 2-SCREW FLANGE CONNECTION TO BE USED WITH SAE J518-1, (CODE 61) CONNECTIONS WHERE ONLY LOW PRESSURE IS REQUIRED |
| UNI EN ISO 15245-1 : 2013 | GAS CYLINDERS - PARALLEL THREADS FOR CONNECTION OF VALVES TO GAS CYLINDERS - PART 1: SPECIFICATION |
| DIN EN ISO 3506-3:2010-04 | Mechanical properties of corrosion-resistant stainless steel fasteners - Part 3: Set screws and similar fasteners not under tensile stress (ISO 3506-3:2009) |
| DIN EN 12184:2014-06 | Electrically powered wheelchairs, scooters and their chargers - Requirements and test methods |
| DIN EN ISO 898-1:2013-05 | MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 1: BOLTS, SCREWS AND STUDS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD (ISO 898-1:2013) |
| DIN EN ISO 898-5:2012-09 | Mechanical properties of fasteners made of carbon steel and alloy steel - Part 5: Set screws and similar threaded fasteners with specified hardness classes - Coarse thread and fine pitch thread (ISO 898-5:2012) |
| BS EN ISO 3506-1:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners Bolts, screws and studs |
| ISO 965-2:1998 | ISO general purpose metric screw threads — Tolerances — Part 2: Limits of sizes for general purpose external and internal screw threads — Medium quality |
| UNE-EN 61056-2:2013 | General purpose lead-acid batteries (valve-regulated types) - Part 2: Dimensions, terminals and marking |
| BS EN ISO 3506-2:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners Nuts |
| I.S. EN 12184:2014 | ELECTRICALLY POWERED WHEELCHAIRS, SCOOTERS AND THEIR CHARGERS - REQUIREMENTS AND TEST METHODS |
| I.S. EN ISO 2320:2015 | FASTENERS - PREVAILING TORQUE STEEL NUTS - FUNCTIONAL PROPERTIES (ISO 2320:2015) |
| I.S. EN ISO 898-1:2013 | MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 1: BOLTS, SCREWS AND STUDS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD (ISO 898-1:2013) |
| DIN ISO 724:2010-01 | ISO general purpose metric screw threads - Basic dimensions (ISO 724:1993 + Cor. 1:2009) |
| I.S. EN ISO 898-5:2012 | MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 5: SET SCREWS AND SIMILAR THREADED FASTENERS WITH SPECIFIED HARDNESS CLASSES - COARSE THREAD AND FINE PITCH THREAD (ISO 898-5:2012) |
| I.S. EN ISO 3506-3:2009 | MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 3: SET SCREWS AND SIMILAR FASTENERS NOT UNDER TENSILE STRESS |
| VDI 3334:2015-03 | Machining of internal threads |
| 13/30277307 DC : 0 | BS ISO 17447-1 - ROAD VEHICLES - GLOW-PLUGS WITH CONICAL SEATING AND THEIR CYLINDER HEAD HOUSING - PART 1: BASIC CHARACTERISTICS AND DIMENSIONS FOR METAL-SHEATH-TYPE GLOW-PLUGS |
| 14/30288036 DC : 0 | BS ISO 13948-1 - DIESEL ENGINES - FUEL INJECTION PUMPS AND FUEL INJECTOR - PART 1: THREADED CONNECTIONS |
| 17/30368045 DC : 0 | PREN 4857-1 - AEROSPACE SERIES- MINIATURE CONNECTORS, HIGH DENSITY, ELECTRICAL, CIRCULAR, SCOOP-PROOF, TRIPLE START THREADED COUPLING, OPERATING TEMPERATURES 175 DEGREES C CONTINUOUS OR 200 DEGREES C CONTINUOUS - SHELL SIZES: 05 TO 07 - PART 001: TECHNICAL SPECIFICATION |
| ISO 6550-3:2013 | Road vehicles Sheath-type glow-plugs with conical seating and their cylinder head housing Part 3: M10 glow-plugs |
| 16/30313948 DC : 0 | BS ISO 18139 - SHIPS AND MARINE TECHNOLOGY - GLOBE VALVES FOR USE IN LOW TEMPERATURE APPLICATIONS - DESIGN AND TESTING REQUIREMENTS |
| 07/30155222 DC : 0 | BS ISO 28741 - ROAD VEHICLES - SPARK-PLUGS AND THEIR CYLINDER HEAD HOUSINGS - BASIC CHARACTERISTICS AND DIMENSIONS |
| BS EN 13618:2016 | Flexible hose assemblies in drinking water installations. Functional requirements and test methods |
| EN ISO 15245-1:2001/A1:2013 | GAS CYLINDERS - PARALLEL THREADS FOR CONNECTION OF VALVES TO GAS CYLINDERS - PART 1: SPECIFICATION (ISO 15245-1:2001/AMD 1:2013) |
| BS ISO 17447-2:2015 | Road Vehicles. Glow-plugs with conical seating and their cylinder head housing Basic characteristics and dimensions for ceramic-sheath-type glow-plugs |
| BS ISO 965-4:1998 | ISO general purpose metric screw threads. Tolerances Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing |
| 10/30165712 DC : 0 | BS ISO 898-2 - MECHANICAL PROPERTIES OF FASTENERS - PART 2: NUTS WITH SPECIFIED PROOF LOAD VALUES; COARSE THREAD |
| BS ISO 6155:1998 | Machine tools. Test conditions for horizontal spindle turret and single spindle automatic lathes. Testing of the accuracy |
| BS ISO 18139:2017 | Ships and marine technology. Globe valves for use in low temperature applications. Design and testing requirements |
| BS ISO 14508:2006 | Road vehicles. Spark plugs. Terminals |
| 12/30235512 DC : 0 | BS ISO 5145 - CYLINDER VALVE OUTLETS FOR GASES AND GAS MIXTURES - SELECTION AND DIMENSIONING |
| BS EN ISO 898-2:2012 | Mechanical properties of fasteners made of carbon steel and alloy steel Nuts with specified property classes. Coarse thread and fine pitch thread |
| ONORM EN ISO 16047 : 2012 | FASTENERS - TORQUE/CLAMP FORCE TESTING (ISO 16047:2005 + AMD 1:2012) |
| PREN 3645-001 : 200P2 | AEROSPACE SERIES - CONNECTORS, ELECTRICAL, CIRCULAR, SCOOP-PROOF, TRIPLE START THREADED COUPLING, OPERATING TEMPERATURE 175 DEGREES C OR 200 DEGREES C CONTINUOUS - PART 001: TECHNICAL SPECIFICATION |
| ISO 16047:2005 | Fasteners — Torque/clamp force testing |
| ANSI Z21.87 :2007 | AUTOMATIC GAS SHUTOFF DEVICES FOR HOT WATER SUPPLY SYSTEMS |
| CSA HGV 4.6 : 2013 | MANUALLY OPERATED VALVES FOR USE IN GASEOUS HYDROGEN VEHICLE FUELING STATIONS |
| AAMI HE75 : 2009 | HUMAN FACTORS ENGINEERING - DESIGN OF MEDICAL DEVICES |
| I.S. EN ISO 11363-2:2017 | GAS CYLINDERS - 17E AND 25E TAPER THREADS FOR CONNECTION OF VALVES TO GAS CYLINDERS - PART 2: INSPECTION GAUGES (ISO 11363-2:2017) |
| EN 12183:2009 | Manual wheelchairs - Requirements and test methods |
| ISO 6162-2:2018 | Hydraulic fluid power — Flange connections with split or one-piece flange clamps and metric or inch screws — Part 2: Flange connectors, ports and mounting surfaces for use at a pressure of 42 MPa (420 bar), DN 13 to DN 76 |
| ISO 13584-511:2006 | Industrial automation systems and integration — Parts library — Part 511: Mechanical systems and components for general use — Reference dictionary for fasteners |
| EN ISO 11363-1:2018 | Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Part 1: Specifications (ISO 11363-1:2018) |
| UNE-EN ISO 898-2:2013 | Mechanical properties of fasteners made of carbon steel and alloy steel - Part 2: Nuts with specified property classes - Coarse thread and fine pitch thread (ISO 898-2:2012) |
| PREN 12184 : DRAFT 2011 | ELECTRICALLY POWERED WHEELCHAIRS, SCOOTERS AND THEIR CHARGERS - REQUIREMENTS AND TEST METHODS |
| BS EN ISO 11363-2:2017 | Gas cylinders. 17E and 25E taper threads for connection of valves to gas cylinders Inspection gauges |
| ISO/TR 16224:2012 | Technical aspects of nut design |
| SAE J 518/2 : 2017 | HYDRAULIC FLANGED TUBE, PIPE, AND HOSE CONNECTIONS, 4-SCREW FLANGE CONNECTION - PART 2: 42 MPA (CODE 62) |
| ONORM EN 3645-001 : 2015 | AEROSPACE SERIES - CONNECTORS, ELECTRICAL, CIRCULAR, SCOOP-PROOF, TRIPLE START THREADED COUPLING, OPERATING TEMPERATURE 175 DEGREES C OR 200 DEGREES C CONTINUOUS - PART 001: TECHNICAL SPECIFICATION |
| ISO 9270-1:2010 | 7/24 taper spindle noses for automatic tool changers Part 1: Dimensions and designation of spindle noses of forms S and SF |
| ISO 13948-1:2015 | Diesel engines Fuel injection pumps and fuel injector low-pressure connections Part 1: Threaded connections |
| ISO 261:1998 | ISO general purpose metric screw threads General plan |
| DIN EN ISO 15245-1:2013-11 | Gas cylinders - Parallel threads for connection of valves to gas cylinders - Part 1: Specification (ISO 15245-1:2001 + Amd 1:2013) (includes Amendment A1:2013) |
| DIN EN 14831 E : 2005 | FASTENERS - TIGHTENING PERFORMANCE - TORQUE/ANGLE SIMPLIFIED TEST METHOD |
| UNE-EN ISO 2320:2017 | Fasteners - Prevailing torque steel nuts - Functional properties (ISO 2320:2015) |
| BS EN ISO 898-1:2013 | Mechanical properties of fasteners made of carbon steel and alloy steel Bolts, screws and studs with specified property classes. Coarse thread and fine pitch thread |
| ISO 965-5:1998 | ISO general purpose metric screw threads — Tolerances — Part 5: Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing |
| BS EN ISO 15245-1 : 2001 | GAS CYLINDERS - PARALLEL THREADS FOR CONNECTION OF VALVES TO GAS CYLINDERS - PART 1: SPECIFICATION |
| UNI EN 15202 : 2012 | LPG EQUIPMENT AND ACCESSORIES - ESSENTIAL OPERATIONAL DIMENSIONS FOR LPG CYLINDER VALVE OUTLET AND ASSOCIATED EQUIPMENT CONNECTIONS |
| UNI EN ISO 3506-2 : 2010 | MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS-STEEL FASTENERS - PART 2: NUTS |
| ONORM EN ISO 3506-2 : 2010 | MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 2: NUTS |
| UNI EN ISO 3506-1 : 2010 | MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS-STEEL FASTENERS - PART 1: BOLTS, SCREWS AND STUDS |
| ONORM EN ISO 3506-1 : 2010 | MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 1: BOLTS, SCREWS AND STUDS |
| UNI EN 14831 : 2005 | FASTENERS - TIGHTENING PERFORMANCE - TORQUE/ANGLE SIMPLIFIED TEST METHOD |
| UNI EN 12184 : 2014 | ELECTRICALLY POWERED WHEELCHAIRS, SCOOTERS AND THEIR CHARGERS - REQUIREMENTS AND TEST METHODS |
| UNI EN ISO 898-1 : 2013 | MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 1: BOLTS, SCREWS AND STUDS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD |
| UNI EN ISO 3506-3 : 2010 | MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS-STEEL FASTENERS - PART 3: SET SCREWS AND SIMILAR FASTENERS NOT UNDER TENSILE STRESS |
| UNI EN ISO 898-5 : 2012 | MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 5: SET SCREWS AND SIMILAR THREADED FASTENERS WITH SPECIFIED HARDNESS CLASSES - COARSE THREAD AND FINE PITCH THREAD |
| 14/30298880 DC : 0 | BS EN ISO 2320 - FASTENERS - PREVAILING TORQUE TYPE STEEL NUTS - MECHANICAL AND PERFORMANCE PROPERTIES |
| DIN 13-6:1999-11 | ISO general purpose metric screw threads - Part 6: Nominal sizes for 1,5 mm fine pitch threads; nominal diameter from 12 mm to 300 mm |
| 16/30302544 DC : 0 | BS EN ISO 9873 - DENTISTRY - INTRA-ORAL MIRRORS |
| 10/30218476 DC : 0 | BS EN 61056-2 ED. 3 - GENERAL PURPOSE LEAD-ACID BATTERIES (VALVE-REGULATED TYPES) - PART 2: DIMENSIONS, TERMINALS AND MARKING |
| BS ISO 16246:2005 | Road vehicles. M12 x 1,25 spark-plugs with flat seating and 14 mm hexagon and their cylinder head housing |
| PD ISO/TR 16224:2012 | Technical aspects of nut design |
| 11/30219208 DC : 0 | BS ISO 888 - BOLTS, SCREWS AND STUDS - NOMINAL LENGTHS, AND THREAD LENGTHS FOR GENERAL PURPOSE BOLTS |
| BS ISO 965-3:1998 | ISO general purpose metric screw threads. Tolerances Deviations for constructional screw threads |
| DIN ISO 262:1999-11 | ISO general purpose metric screw threads - Selected sizes for screws, bolts and nuts (ISO 262:1998) |
| ANSI Z21.21 : 2015 | AUTOMATIC VALVES FOR GAS APPLIANCES |
| BS EN 4645-001:2010 | Aerospace series. Connectors, optical, circular, single and multipin, coupled by threaded ring, self-locking 1,25 mm diameter ferrule with removable alignment sleeve holder Technical specification |
| DIN ISO 965-1:2017-05 | ISO GENERAL PURPOSE METRIC SCREW THREADS - TOLERANCES - PART 1: PRINCIPLES AND BASIC DATA (ISO 965-1:2013) |
| 17/30332783 DC : 0 | BS ISO 5145 - GAS CYLINDERS - CYLINDER VALVE OUTLETS FOR GASES AND GAS MIXTURES - SELECTION AND DIMENSIONING |
| CEI EN 60423 : 2008 | CONDUIT SYSTEMS FOR CABLE MANAGEMENT - OUTSIDE DIAMETERS OF CONDUITS FOR ELECTRICAL INSTALLATIONS AND THREADS FOR CONDUITS AND FITTINGS |
| BS ISO 6162-1:2012 | Hydraulic fluid power. Flange connections with split or one-piece flange clamps and metric or inch screws Flange connectors, ports and mounting surfaces for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127 |
| NF ISO 9270-1 : 2010 | 7/24 TAPER SPINDLE NOSES FOR AUTOMATIC TOOL CHANGERS - PART 1: DIMENSIONS AND DESIGNATION OF SPINDLE NOSES OF FORMS S AND SF |
| 08/30152628 DC : DRAFT SEP 2008 | BS ISO 6550-4 - ROAD VEHICLES - SHEATH-TYPE GLOW-PLUGS WITH CONICAL SEATING AND THEIR CYLINDER HEAD HOUSING - PART 4: M8 X 1 GLOW-PLUGS |
| 11/30232174 DC : DRAFT AUG 2011 | BS ISO 6550-3 - ROAD VEHICLES - SHEATH-TYPE GLOW-PLUGS WITH CONICAL SEATING AND THEIR CYLINDER HEAD HOUSING - PART 3: M10 GLOW-PLUGS |
| EN 12184:2014 | Electrically powered wheelchairs, scooters and their chargers - Requirements and test methods |
| 11/30237926 DC : 0 | BS EN 12184 - ELECTRICALLY POWERED WHEELCHAIRS, SCOOTERS AND THEIR CHARGERS - REQUIREMENTS AND TEST METHODS |
| BS EN ISO 9873:2017 | Dentistry. Intra-oral mirrors |
| SAE J 518/1 : 2013 | HYDRAULIC FLANGED TUBE, PIPE, AND HOSE CONNECTIONS, 4-SCREW FLANGE CONNECTION - PART 1: 3.5 MPA TO 35 MPA (CODE 61) |
| BS ISO 262:1998 | ISO general purpose metric screw threads. Selected sizes for screws, bolts and nuts |
| ISO 2346:2001 | Road vehicles M14 x 1,25 compact spark-plugs with flat seating and 19 mm hexagon and their cylinder head housing |
| I.S. EN ISO 15245-1:2002 | GAS CYLINDERS - PARALLEL THREADS FOR CONNECTION OF VALVES TO GAS CYLINDERS - PART 1: SPECIFICATION (ISO 15245-1:2001) |
| IS 1367 : Part 3 : 2017 | TECHNICAL SUPPLY CONDITIONS FOR THREADED STEEL FASTENERS - PART 3: MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND BOLTS, SCREWS AND STUDS |
| 16/30332777 DC : 0 | BS EN ISO 11363-2 - GAS CYLINDERS - 17E AND 25E TAPER THREADS FOR CONNECTION OF VALVES TO GAS CYLINDERS - PART 2: INSPECTION GAUGES |
| ANSI Z21.87 : 2007 : INC : ADD A : 2010 : R2017 | AUTOMATIC GAS SHUTOFF DEVICES FOR HOT WATER SUPPLY SYSTEMS |
| UNE-EN 13618:2017 | Flexible hose assemblies in drinking water installations - Functional requirements and test methods |
| ISO 724:1993 | ISO general-purpose metric screw threads — Basic dimensions |
| ISO 17447-1:2015 | Road Vehicles Glow-plugs with conical seating and their cylinder head housing Part 1: Basic characteristics and dimensions for metal-sheath-type glow-plugs |
| CSA HGV 4.7:2013:(R2018) | AUTOMATIC VALVES FOR USE IN GASEOUS HYDROGEN VEHICLE FUELING STATIONS |
| UNI EN ISO 898-2 : 2012 | MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 2: NUTS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD |
| UNI EN ISO 16047 : 2012 | FASTENERS - TORQUE/CLAMP FORCE TESTING |
| DIN EN ISO 9873 E : 2000 | DENTISTRY - INTRA-ORAL MIRRORS (ISO 9873:2017) |
| ISO 18139:2017 | Ships and marine technology — Globe valves for use in low temperature applications — Design and testing requirements |
| BS ISO 8789:2009 | Rubber hoses and hose assemblies for liquefied petroleum gas in motor vehicles. Specification |
| BS EN 12183:2014 | Manual wheelchairs. Requirements and test methods |
| UNE-EN 12183:2014 | Manual wheelchairs - Requirements and test methods |
| DIN 13-7:1999-11 | ISO GENERAL PURPOSE METRIC SCREW THREADS - PART 7: NOMINAL SIZES FOR 2 MM FINE PITCH THREADS - NOMINAL DIAMETER FROM 17 MM TO 300 MM |
| BS ISO 6550-4:2014 | Road vehicles. Sheath-type glow-plugs with conical seating and their cylinder head housing M8 x 1 glow-plugs |
| ISO 19812:2006 | Road vehicles M10 x 1 compact spark-plugs with flat seating and 16 mm hexagon and their cylinder head housings |
| I.S. EN 4645-001:2010 | AEROSPACE SERIES - CONNECTORS, OPTICAL, CIRCULAR, SINGLE AND MULTIPIN, COUPLED BY THREADED RING, SELF-LOCKING 1,25 MM DIAMETER FERRULE WITH REMOVABLE ALIGNMENT SLEEVE HOLDER - PART 001: TECHNICAL SPECIFICATION |
| ISO 16246:2005 | Road vehicles M12 x 1,25 spark-plugs with flat seating and 14 mm hexagon and their cylinder head housing |
| ISO 9270-2:2010 | 7/24 taper spindle noses for automatic tool changers Part 2: Dimensions and designation of spindle noses of forms J and JF |
| EN ISO 11363-2:2017 | Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Part 2: Inspection gauges (ISO 11363-2:2017) |
| ISO 6162-1:2012 | Hydraulic fluid power — Flange connections with split or one-piece flange clamps and metric or inch screws — Part 1: Flange connectors, ports and mounting surfaces for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127 |
| I.S. EN 13618:2016 | FLEXIBLE HOSE ASSEMBLIES IN DRINKING WATER INSTALLATIONS - FUNCTIONAL REQUIREMENTS AND TEST METHODS |
| ISO 14508:2006 | Road vehicles Spark-plugs Terminals |
| ISO 6550-4:2014 | Road vehicles Sheath-type glow-plugs with conical seating and their cylinder head housing Part 4: M8 x 1 glow-plugs |
| DIN EN ISO 2320:2016-05 | FASTENERS - PREVAILING TORQUE STEEL NUTS - FUNCTIONAL PROPERTIES (ISO 2320:2015) |
| BS EN 3645-001:2015 | Aerospace series. Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175°C or 200°C continuous Technical specification |
| BS EN ISO 15245-2:2001 | Gas cylinders. Parallel threads for connection of valves to gas cylinders Gauge inspection |
| UNE-EN ISO 3506-2:2010 | Mechanical properties of corrosion-resistant stainless steel fasteners - Part 2: Nuts (ISO 3506-2:2009) |
| IEC 61056-2:2012 | General purpose lead-acid batteries (valve-regulated types) - Part 2: Dimensions, terminals and marking |
| ISO 2320:2015 | Fasteners Prevailing torque steel nuts Functional properties |
| ISO 965-3:1998 | ISO general purpose metric screw threads Tolerances Part 3: Deviations for constructional screw threads |
| DIN EN 15202 E : 2012 | LPG EQUIPMENT AND ACCESSORIES - ESSENTIAL OPERATIONAL DIMENSIONS FOR LPG CYLINDER VALVE OUTLET AND ASSOCIATED EQUIPMENT CONNECTIONS |
| EN ISO 3506-1:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners - Part 1: Bolts, screws and studs (ISO 3506-1:2009) |
| I.S. EN ISO 3506-2:2009 | MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 2: NUTS |
| ISO 898-1:2013 | Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread |
| BS EN 12184:2014 | Electrically powered wheelchairs, scooters and their chargers. Requirements and test methods |
| ISO 898-5:2012 | Mechanical properties of fasteners made of carbon steel and alloy steel Part 5: Set screws and similar threaded fasteners with specified hardness classes Coarse thread and fine pitch thread |
| IEC 60423:2007 | Conduit systems for cable management - Outside diameters of conduits for electrical installations and threads for conduits and fittings |
| ISO 965-1:2013 | ISO general purpose metric screw threads — Tolerances — Part 1: Principles and basic data |
| ONORM EN 15202 : 2012 | LPG EQUIPMENT AND ACCESSORIES - ESSENTIAL OPERATIONAL DIMENSIONS FOR LPG CYLINDER VALVE OUTLET AND ASSOCIATED EQUIPMENT CONNECTIONS |
| ISO 15245-1:2001 | Gas cylinders Parallel threads for connection of valves to gas cylinders Part 1: Specification |
| ISO 965-4:1998 | ISO general purpose metric screw threads Tolerances Part 4: Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing |
| UNE-EN 12184:2014 | Electrically powered wheelchairs, scooters and their chargers - Requirements and test methods |
| BS EN 60423:1995 | Conduits for electrical purposes. Outside diameters of conduits for electrical installations and threads for conduits and fittings |
| ISO 898-2:2012 | Mechanical properties of fasteners made of carbon steel and alloy steel — Part 2: Nuts with specified property classes — Coarse thread and fine pitch thread |
| UNE-EN ISO 3506-3:2010 | Mechanical properties of corrosion-resistant stainless steel fasteners - Part 3: Set screws and similar fasteners not under tensile stress (ISO 3506-3:2009) |
| UNE-EN 15202:2012 | LPG equipment and accessories - Essential operational dimensions for LPG cylinder valve outlet and associated equipment connections |
| BS EN ISO 2320:2015 | Fasteners. Prevailing torque steel nuts. Functional properties |
| I.S. EN ISO 3506-1:2009 | MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 1: BOLTS, SCREWS AND STUDS |
| ISO 15245-2:2001 | Gas cylinders — Parallel threads for connection of valves to gas cylinders — Part 2: Gauge inspection |
| BS EN 14831:2005 | Fasteners. Tightening performance. Torque/Angle simplified test method |
| BS EN 13190:2001 | Dial thermometers |
| UNE-EN ISO 898-5:2013 | Mechanical properties of fasteners made of carbon steel and alloy steel - Part 5: Set screws and similar threaded fasteners with specified hardness classes - Coarse thread and fine pitch thread (ISO 898-5:2012) |
| EN ISO 3506-2:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners - Part 2: Nuts (ISO 3506-2:2009) |
| UNE-EN ISO 9873:2017 | Dentistry - Intra-oral mirrors (ISO 9873:2017) |
| ISO 10958-2:2015 | Snowboards Binding mounting area Part 2: Requirements and test methods for snowboards with inserts |
| EN ISO 898-1:2013 | Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread (ISO 898-1:2013) |
| EN 13618:2016 | Flexible hose assemblies in drinking water installations - Functional requirements and test methods |
| EN 4645-001:2010 | Aerospace series - Connectors, optical, circular, single and multipin, coupled by threaded ring, self-locking 1,25 mm diameter ferrule with removable alignment sleeve holder - Part 001: Technical specification |
| EN ISO 2320:2015 | Fasteners - Prevailing torque steel nuts - Functional properties (ISO 2320:2015) |
| EN 3645-001:2015 | Aerospace series - Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 °C or 200 °C continuous - Part 001: Technical specification |
| EN ISO 3506-3:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners - Part 3: Set screws and similar fasteners not under tensile stress (ISO 3506-3:2009) |
| EN ISO 15245-2:2001 | Gas cylinders - Parallel threads for connection of valves to gas cylinders - Part 2: Gauge inspection (ISO 15245-2:2001) |
| EN ISO 16047:2005/A1:2012 | FASTENERS - TORQUE/CLAMP FORCE TESTING (ISO 16047:2005/AMD 1:2012) |
| EN 14831:2005 | Fasteners - Tightening performance - Torque/Angle simplified test method |
| EN ISO 898-5:2012 | Mechanical properties of fasteners made of carbon steel and alloy steel - Part 5: Set screws and similar threaded fasteners with specified hardness classes - Coarse thread and fine pitch thread (ISO 898-5:2012) |
| DIN ISO 6696 E : 2016 | CYCLES - SCREW THREADS USED IN BOTTOM BRACKET ASSEMBLIES (ISO 6696:1989) |
| DIN EN 13618:2016-05 (Draft) | FLEXIBLE HOSE ASSEMBLIES IN DRINKING WATER INSTALLATIONS - FUNCTIONAL REQUIREMENTS AND TEST METHODS |
| 10/30218994 DC : 0 | BS EN 15202 - LPG EQUIPMENT AND ACCESSORIES - ESSENTIAL OPERATIONAL DIMENSIONS FOR LPG CYLINDER VALVE OUTLET AND ASSOCIATED EQUIPMENT CONNECTIONS |
| BS ISO 8470:2006 | Road vehicles M14 x 1,25 spark-plugs with flat seating and 16 mm hexagon and their cylinder head housings |
| CSA HGV 4.4 : 2013(R2018) | STANDARD FOR BREAKAWAY DEVICES FOR COMPRESSED HYDROGEN DISPENSING HOSES AND SYSTEMS |
| 09/30193290 DC : DRAFT MAR 2009 | BS EN 12183 - MANUAL WHEELCHAIRS - REQUIREMENTS AND TEST METHODS |
| MSS SP 133 : 2010 | EXCESS FLOW VALVES FOR LOW PRESSURE FUEL GAS APPLIANCES |
| BS ISO 965-2:1998 | ISO general purpose metric screw threads. Tolerances Limits of sizes for general purpose external and internal screw threads. Medium quality |
| DIN 13-9:1999-11 | ISO general purpose metric screw threads - Part 9: Nominal sizes for 4 mm fine pitch threads; nominal diameter from 40 mm to 300 mm |
| BS ISO 6550-3:2013 | Road vehicles. Sheath-type glow-plugs with conical seating and their cylinder head housing M10 glow-plugs |
| 14/30297664 DC : 0 | BS EN 3645-001 - AEROSPACE SERIES - CONNECTORS, ELECTRICAL, CIRCULAR, SCOOP-PROOF, TRIPLE START THREADED COUPLING, OPERATING TEMPERATURE 175 DEGREES C OR 200 DEGREES C CONTINUOUS - PART 001: TECHNICAL SPECIFICATION |
| DIN 13-52:2016-10 (Draft) | ISO GENERAL PURPOSE METRIC SCREW THREADS - PART 52: MULTI-START THREAD TOLERANCES AND DEVIATION OF PROFILE |
| BS ISO 888 : 2012 | FASTENERS - BOLTS, SCREWS AND STUDS - NOMINAL LENGTHS AND THREAD LENGTHS |
| 15/30317648 DC : 0 | BS ISO 8789 - RUBBER HOSES AND HOSE ASSEMBLIES FOR LIQUEFIED PETROLEUM GAS IN MOTOR VEHICLES - SPECIFICATION |
| 04/30107372 DC : DRAFT AUG 2004 | BS EN 12183 - MANUAL WHEELCHAIRS - REQUIREMENTS AND TEST METHODS |
| DIN 202:1999-11 | SCREW THREADS - GENERAL PLAN |
| 06/30148355 DC : DRAFT MAR 2006 | |
| 05/30127446 DC : DRAFT JAN 2005 | ISO 13584-511 - INDUSTRIAL AUTOMATION SYSTEMS AND INTEGRATION - PARTS LIBRARY - PART 511: MECHANICAL SYSTEMS AND COMPONENTS FOR GENERAL USE - REFERENCE DICTIONARY FOR FASTENERS |
| ISO 888:2012 | Fasteners — Bolts, screws and studs — Nominal lengths and thread lengths |
| DIN ISO 10958-2:2016-05 | SNOWBOARDS - BINDING MOUNTING AREA - PART 2: REQUIREMENTS AND TEST METHODS FOR SNOWBOARDS WITH INSERTS (ISO 10958-2:2015) |
| CSA HGV 4.5 : 2013 | STANDARD FOR PRIORITY AND SEQUENCING EQUIPMENT FOR HYDROGEN VEHICLE FUELING |
| UNI EN ISO 11363-1 : 2010 | GAS CYLINDERS - 17E AND 25E TAPER THREADS FOR CONNECTION OF VALVES TO GAS CYLINDERS - PART 1: SPECIFICATIONS |
| I.S. EN ISO 11363-1:2018 | GAS CYLINDERS - 17E AND 25E TAPER THREADS FOR CONNECTION OF VALVES TO GAS CYLINDERS - PART 1: SPECIFICATIONS (ISO 11363-1:2018) |
| ISO 22977:2005 | Road vehicles M12 x 1,25 spark-plugs with flat seating and 14 mm bi-hexagon and their cylinder head housing |
| ISO 28741:2013 | Road vehicles — Spark-plugs and their cylinder head housings — Basic characteristics and dimensions |
| CSA 6.5 : 2015 | AUTOMATIC VALVES FOR GAS APPLIANCES |
| EN ISO 9873:2017 | Dentistry - Intra-oral mirrors (ISO 9873:2017) |
| ISO 11363-2:2017 | Gas cylinders — 17E and 25E taper threads for connection of valves to gas cylinders — Part 2: Inspection gauges |
| ISO 262:1998 | ISO general purpose metric screw threads — Selected sizes for screws, bolts and nuts |
| ISO 5145:2017 | Gas cylinders — Cylinder valve outlets for gases and gas mixtures — Selection and dimensioning |
| ISO 3506-1:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners Part 1: Bolts, screws and studs |
| ISO 3506-3:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners Part 3: Set screws and similar fasteners not under tensile stress |
| BS EN ISO 898-5:2012 | Mechanical properties of fasteners made of carbon steel and alloy steel Set screws and similar threaded fasteners with specified hardness classes. Coarse thread and fine pitch thread |
| DIN EN 14831:2005-07 | Fasteners - Tightening performance - Torque/Angle simplified test method |
| DIN EN 15202:2012-09 | LPG EQUIPMENT AND ACCESSORIES - ESSENTIAL OPERATIONAL DIMENSIONS FOR LPG CYLINDER VALVE OUTLET AND ASSOCIATED EQUIPMENT CONNECTIONS |
| DIN EN ISO 9873:2000-07 | DENTISTRY - INTRA-ORAL MIRRORS (ISO 9873:2017) |
| DIN EN 13618:2017-03 | FLEXIBLE HOSE ASSEMBLIES IN DRINKING WATER INSTALLATIONS - FUNCTIONAL REQUIREMENTS AND TEST METHODS |
| DIN ISO 965-5:2002-05 | ISO GENERAL PURPOSE METRIC SCREW THREADS - TOLERANCES - PART 5: LIMITS OF SIZES FOR INTERNAL SCREW THREADS TO MATE WITH HOT-DIP GALVANIZED EXTERNAL SCREW THREADS WITH MAXIMUM SIZE OF TOLERANCE POSITION H BEFORE GALVANIZING |
| DIN EN ISO 16047:2013-01 | FASTENERS - TORQUE/CLAMP FORCE TESTING (ISO 16047:2005 + AMD 1:2012) |
| EN 13190:2001 | Dial thermometers |
| DIN EN ISO 898-2:2012-08 | Mechanical properties of fasteners made of carbon steel and alloy steel - Part 2: Nuts with specified property classes - Coarse thread and fine pitch thread (ISO 898-2:2012) |
| DIN ISO 965-4:2002-05 | ISO GENERAL PURPOSE METRIC SCREW THREADS - TOLERANCES - PART 4: LIMITS OF SIZES FOR HOT-DIP GALVANIZED EXTERNAL SCREW THREADS TO MATE WITH INTERNAL SCREW THREADS TAPPED WITH TOLERANCE POSITION H OR G AFTER GALVANIZING |
| ASME B1.13M:2005 | METRIC SCREW THREADS - M PROFILE |
| ASME B1.13M : 2005 (R2015) | METRIC SCREW THREADS - M PROFILE |
| ASME B1.13M : 2005 : R2010 | METRIC SCREW THREADS - M PROFILE |
| ISO 5408:2009 | Screw threads Vocabulary |
| AS 3695.2:2019 | Wheelchairs Requirements and test methods for electrically powered wheelchairs (including mobility scooters) |
| ISO 965-1:2013 | ISO general purpose metric screw threads — Tolerances — Part 1: Principles and basic data |
US$73.00
Excluding Tax where applicable
USD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - French
PDF - French
PDF 3 Users - French
PDF 5 Users - French
PDF 9 Users - French
Hardcopy - English
PDF - English
PDF 3 Users - English
PDF 5 Users - English
PDF 9 Users - English
Hardcopy - French
PDF - French
PDF 3 Users - French
PDF 5 Users - French
PDF 9 Users - French
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.