ISO 6806:2017
Current
The latest, up-to-date edition.
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
French, English
05-31-2017
ISO 6806:2017 specifies the minimum requirements for rubber hoses and hose assemblies for use in oil burners.
The following two types of hose assembly are specified.
- Type 1: Hose assemblies for flux and reflux, but not for insertion between the oil burner pump and the atomizing connection; maximum working pressure 1,0 MPa (10 bar); maximum oil temperature 100 °C.
- Type 2: Hose assemblies for insertion between the oil burner pump and the atomizing connection; maximum working pressure 4,0 MPa (40 bar); maximum oil temperature 100 °C.
The hose assemblies specified in this document are not intended to be used, without special assessment, for purposes other than oil burner installations.
DevelopmentNote |
Supersedes ISO/DIS 6806. (06/2017)
|
DocumentType |
Standard
|
Pages |
14
|
PublisherName |
International Organization for Standardization
|
Status |
Current
|
Supersedes |
Standards | Relationship |
UNI EN ISO 6806:2017 | Identical |
NF EN ISO 6806 : 2017 | Identical |
NEN EN ISO 6806 : 2017 | Identical |
NS EN ISO 6806 : 2017 | Identical |
PN EN ISO 6806 : 2017 | Identical |
UNI EN ISO 6806 : 2014 | Identical |
UNE-EN ISO 6806:2017 | Identical |
BS EN ISO 6806:2017 | Identical |
EN ISO 6806:2017 | Identical |
DIN EN ISO 6806:2015-08 (Draft) | Identical |
I.S. EN ISO 6806:2017 | Identical |
SN EN ISO 6806 : 2017 | Identical |
BS 6846:1987 | Identical |
DIN 4798:1988-01 | Corresponds |
09/30202307 DC : 0 | BS EN 12514-1 - PARTS FOR SUPPLY SYSTEMS FOR CONSUMING UNITS WITH LIQUID FUELS - PART 1: SAFETY REQUIREMENTS AND TESTS - TERMINOLOGY, GENERAL REQUIREMENTS |
EN 12514-2:2000 | Installations for oil supply systems for oil burners - Part 2: Safety requirements and tests - Parts, valves, pipes, filters, oil de-aerators, meters |
09/30202316 DC : 0 | BS EN 12514-4 - PARTS FOR SUPPLY SYSTEMS FOR CONSUMING UNITS WITH LIQUID FUELS - PART 4: SAFETY REQUIREMENTS AND TESTS - PIPINGS AND PARTS WITHIN PIPELINES |
I.S. EN 12514-2:2000 | INSTALLATIONS FOR OIL SUPPLY SYSTEMS FOR OIL BURNERS - PART 2: SAFETY REQUIREMENTS AND TESTS; PARTS, VALVES, PIPES, FILTERS, OIL DE-AERATORS, METERS |
BS ISO 22968:2010 | Forced draught oil burners |
PD ISO/TR 17784:2003 | Rubber and plastic hoses and hose assemblies. Guide for use by purchasers, assemblers, installers and operating personnel |
EN 267:2009+A1:2011 | Automatic forced draught burners for liquid fuels |
DIN EN 267:2012-03 (Draft) | AUTOMATIC FORCED DRAUGHT BURNERS FOR LIQUID FUELS |
DIN EN 267:2011-11 | Automatic forced draught burners for liquid fuels |
EN 12115:2011 | Rubber and thermoplastics hoses and hose assemblies for liquid or gaseous chemicals - Specification |
I.S. EN 12115:2011 | RUBBER AND THERMOPLASTICS HOSES AND HOSE ASSEMBLIES FOR LIQUID OR GASEOUS CHEMICALS - SPECIFICATION |
12/30258099 DC | BS EN 267. Forced draught burners for liquid fuels |
BS EN 267 : 2009 | AUTOMATIC FORCED DRAUGHT BURNERS FOR LIQUID FUELS |
DIN EN 12514-2:2009-06 (Draft) | INSTALLATIONS FOR OIL SUPPLY SYSTEMS FOR OIL BURNERS - PART 2: SAFETY REQUIREMENTS AND TESTS - PARTS, VALVES PIPES, FILTERS, OIL DE-AERATORS, METERS |
DIN EN 12115:2011-04 | Rubber and thermoplastics hoses and hose assemblies for liquid or gaseous chemicals - Specification; German version EN 12115:2011 |
UNI EN 267 : 2011 | AUTOMATIC FORCED DRAUGHT BURNERS FOR LIQUID FUELS |
BS ISO 27126:2014 | Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals. Specification |
ISO/TR 17784:2003 | Rubber and plastics hoses and hose assemblies Guide for use by purchasers, assemblers, installers and operating personnel |
I.S. EN 267:2009 | AUTOMATIC FORCED DRAUGHT BURNERS FOR LIQUID FUELS |
BS EN 12115:2011 | Rubber and thermoplastics hoses and hose assemblies for liquid or gaseous chemicals. Specification |
BS EN 12514-2:2000 | Installations for oil supply systems for oil burners Safety requirements and tests. Parts, valves, pipes, filters, oil de-aerators, meters |
BS EN 12514-1:2000 | Installations for oil supply systems for oil burners Safety requirements and tests. Parts, oil feed pumps, control and safety devices, supply tanks |
ISO 22968:2010 | Forced draught oil burners |
09/30202313 DC : 0 | BS EN 12514-3 - PARTS FOR SUPPLY SYSTEMS FOR CONSUMING UNITS WITH LIQUID FUELS - PART 3: SAFETY REQUIREMENTS AND TESTS - VALVES AND METERS |
ISO 27126:2014 | Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals Specification |
DIN EN 12514-1:2009-06 (Draft) | INSTALLATIONS FOR OIL SUPPLY SYSTEMS FOR OIL BURNERS - PART 1: SAFETY REQUIREMENTS AND TESTS - PARTS, OIL FEED PUMPS, CONTROL AND SAFETY DEVICES, SUPPLY TANKS |
UNI EN 12115 : 2011 | RUBBER AND THERMOPLASTICS HOSES AND HOSE ASSEMBLIES FOR LIQUID OR GASEOUS CHEMICALS - SPECIFICATION |
ISO 188:2011 | Rubber, vulcanized or thermoplastic — Accelerated ageing and heat resistance tests |
ISO 7326:2016 | Rubber and plastics hoses Assessment of ozone resistance under static conditions |
ISO 8330:2007 | Rubber and plastics hoses and hose assemblies Vocabulary |
ISO 10619-2:2011 | Rubber and plastics hoses and tubing Measurement of flexibility and stiffness Part 2: Bending tests at sub-ambient temperatures |
ISO 37:2017 | Rubber, vulcanized or thermoplastic — Determination of tensile stress-strain properties |
ISO 4671:2007 | Rubber and plastics hoses and hose assemblies Methods of measurement of the dimensions of hoses and the lengths of hose assemblies |
ISO 1402:2009 | Rubber and plastics hoses and hose assemblies Hydrostatic testing |
ISO 1307:2006 | Rubber and plastics hoses — Hose sizes, minimum and maximum inside diameters, and tolerances on cut-to-length hoses |
ISO 48:2010 | Rubber, vulcanized or thermoplastic Determination of hardness (hardness between 10 IRHD and 100 IRHD) |
ISO 1436:2017 | Rubber hoses and hose assemblies Wire-braid-reinforced hydraulic types for oil-based or water-based fluids Specification |
ISO 1817:2015 | Rubber, vulcanized or thermoplastic Determination of the effect of liquids |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.