• There are no items in your cart

ISO/IEC 7811-1:2014

Withdrawn
Withdrawn

A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.

View Superseded by
withdrawn

A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.

Identification cards Recording technique Part 1: Embossing
Available format(s)

Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users

Withdrawn date

03-11-2019

Language(s)

English

Published date

08-25-2014

ISO/IEC 7811-1:2014 is one of a series of International Standards describing the parameters for identification cards as defined in the definitions clause and the use of such cards for international interchange.

It specifies requirements for embossed characters on identification cards. The embossed characters are intended for transfer of data either by use of imprinters or by visual or machine reading. It takes into consideration both human and machine aspects and states minimum requirements.

It is the purpose of ISO/IEC 7811-1:2014 to provide criteria to which cards shall perform. No consideration is given to the amount of use, if any, experienced by the card prior to test. Failure to conform to specified criteria should be negotiated between the involved parties.

ISO/IEC 10373 1 specifies the test procedures used to check cards against the parameters specified in ISO/IEC 7811-1:2014.

DevelopmentNote
Supersedes ISO 3554 (04/2001) Supersedes ISO/IEC 7811-3 (01/2003) Supersedes ANSI X4.16 (07/2004)
DocumentType
Standard
Pages
22
PublisherName
International Organization for Standardization
Status
Withdrawn
SupersededBy
Supersedes

DIN EN ISO-IEC 10373 : 1995 IDENTIFICATION CARDS; TEST METHODS
S.R. CEN ISO/TR 22411:2011 ERGONOMICS DATA AND GUIDELINES FOR THE APPLICATION OF ISO/IEC GUIDE 71 TO PRODUCTS AND SERVICES TO ADDRESS THE NEEDS OF OLDER PERSONS AND PERSONS WITH DISABILITIES
TS 102 221 : 13.0.0 SMART CARDS; UICC-TERMINAL INTERFACE; PHYSICAL AND LOGICAL CHARACTERISTICS (RELEASE 14)
BS ISO/IEC 7816-1:2011 Identification cards. Integrated circuit cards Cards with contacts. Physical characteristics
TS 151 011 : 4.15.0 DIGITAL CELLULAR TELECOMMUNICATIONS SYSTEM (PHASE 2+); SPECIFICATION OF THE SUBSCRIBER IDENTITY MODULE - MOBILE EQUIPMENT (SIM-ME) INTERFACE
BS EN 28583:1991 Bank card originated messages. Interchange message specifications. Content for financial transactions
CAN/CSA-ISO/IEC 7816-2-08 (R2018) Identification cards - Integrated circuit cards - Part 2: Cards with contacts - Dimensions and location of the contacts (Adopted ISO/IEC 7816-2:2007, second edition, 2007-10-15)
BS ISO/IEC 7816-2:2007 Identification cards. Integrated circuit cards Cards with contacts. Dimensions and location of the contacts
ANSI INCITS 322 : 2015 INFORMATION TECHNOLOGY - CARD DURABILITY TEST METHODS
BS ISO 4909:2000 Bank cards. Magnetic stripe data content for track 3
07/30162877 DC : 0 BS ISO/IEC 14443-1 - IDENTIFICATION CARDS - CONTACTLESS INTEGRATED CIRCUIT(S) CARDS - PROXIMITY CARDS - PART 1: PHYSICAL CHARACTERISTICS
BS 7107:1990 Procedure for allocating international issuer identification numbers (IINs) for use on identification cards
ANSI INCITS 284 : 2011 INFORMATION TECHNOLOGY - IDENTIFICATION CARDS - HEALTH CARE IDENTIFICATION CARDS
INCITS/ISO/IEC 15693-3 : 2001 IDENTIFICATION CARDS - CONTACTLESS INTEGRATED CIRCUIT(S) CARDS - VICINITY CARDS - PART 3: ANTICOLLISION AND TRANSMISSION PROTOCOL
ISO/IEC 18328-2:2015 Identification cards ICC-managed devices Part 2: Physical characteristics and test methods for cards with devices
INCITS/ISO/IEC 15457-3 : 2002 IDENTIFICATION CARDS - THIN FLEXIBLE CARDS - PART 3: TEST METHODS
I.S. EN ISO/IEC 7813:1997 IDENTIFICATION CARDS - FINANCIAL TRANSACTION CARDS
INCITS/ISO/IEC 15693-3 : 2001 : R2006 IDENTIFICATION CARDS - CONTACTLESS INTEGRATED CIRCUIT(S) CARDS - VICINITY CARDS - PART 3: ANTICOLLISION AND TRANSMISSION PROTOCOL
ISO/IEC 10373:1993 Identification cards Test methods
DIN EN 1332-5 E : 2006 IDENTIFICATION CARD SYSTEMS - MAN-MACHINE INTERFACE - PART 5: RAISED TACTILE SYMBOLS FOR DIFFERENTIATION OF APPLICATION ON ID-1 CARDS
EN 1332-5:2006 Identification card systems - Man-machine interface - Part 5: Raised tactile symbols for differenciation of application on ID-1 cards
ETSI GSM 11.11 : 050300 DIGITAL CELLULAR TELECOMMUNICATIONS SYSTEM (PHASE 2+); SPECIFICATION OF THE SUBSCRIBER IDENTITY MODULE - MOBILE EQUIPMENT (SIM-ME) INTERFACE
BS EN 27813:1992 Identification cards. Financial transaction cards
ISO 20302:2014 Health informatics Health cards Numbering system and registration procedure for issuer identifiers
BS EN ISO 10536-1:1995 Identification cards. Contactless integrated circuit(s) cards Physical characteristics
NF ETS 300 331 : 1998 RADIO EQUIPMENT AND SYSTEMS (RES) - DIGITAL EUROPEAN CORDLESS TELECOMMUNICATIONS (DECT) - DECT AUTHENTICATION MODULE (DAM)
BS 7100:1990 Method of formatting electronic messages relating to financial transactions for exchange between financial institutions
17/30359941 DC : 0 BS ISO/IEC 14443-1 - IDENTIFICATION CARDS - CONTACTLESS INTEGRATED CIRCUIT CARDS - PROXIMITY CARDS - PART 1: PHYSICAL CHARACTERISTICS
EN ISO/IEC 10373 : 1995 IDENTIFICATION CARDS - TEST METHODS
CAN/CSA-ISO/IEC 18328-2:16 Identification cards ICC-managed devices Part 2: Physical characteristics and test methods for cards with devices (Adopted ISO/IEC 18328-2:2015, first edition, 2015-11-01)
ISO 4909:2000 Bank cards Magnetic stripe data content for track 3
I.S. EN ISO/IEC 7811-3:1997 IDENTIFICATION CARDS - RECORDING TECHNIQUE - PART 3: LOCATION OF EMBOSSED CHARACTERS ON ID-1 CARDS
CEN ISO/TR 22411:2011 Ergonomics data and guidelines for the application of ISO/IEC Guide 71 to products and services to address the needs of older persons and persons with disabilities (ISO/TR 22411:2008)
BS EN ISO/IEC 10373:1995 Identification cards. Test methods
CSA ISO/IEC 7816-2 : 2008 : R2013 IDENTIFICATION CARDS - INTEGRATED CIRCUIT CARDS - PART 2: CARDS WITH CONTACTS - DIMENSIONS AND LOCATION OF THE CONTACTS
AIIM TR32 : 0 PAPER FORMS DESIGN OPTIMIZATION FOR ELECTRONIC IMAGE MANAGEMENT (EIM)
INCITS/ISO/IEC 10536-3 : 2008 IDENTIFICATION CARDS - CONTACTLESS INTEGRATED CIRCUIT(S) CARDS - PART 3: ELECTRONIC SIGNALS AND RESET PROCEDURES
BS PD ISO/TR 22411 : 2008
BS 6571-5:1989 Vehicle parking control equipment Guide to the requirements for non-coin operated apparatus for use with parking control equipment
09/30213280 DC : 0 BS ISO/IEC 7816-1 - IDENTIFICATION CARDS - INTEGRATED CARDS - CARDS WITH CONTACTS - PART 1: PHYSICAL CHARACTERISTICS
BS EN ISO/IEC 7813:1996 Identification cards. Financial transaction cards
INCITS/ISO/IEC 7811-3 : 1995 IDENTIFICATION CARDS - RECORDING TECHNIQUE - PART 3: LOCATION OF EMBOSSED CHARACTERS ON LD-1 CARDS
INCITS/ISO/IEC 15457-3 : 2002 : R2007 IDENTIFICATION CARDS - THIN FLEXIBLE CARDS - PART 3: TEST METHODS
CAN/CSA-ISO/IEC 10536-2-98 (R2011) Identification Cards - Contactless Integrated Circuit(s) Cards - Part 2: Dimensions and Location of Coupling Areas (Adopted ISO/IEC 10536-2:1995)
CSA ISO/IEC 10536-2 : 1998 : R2002 : FR IDENTIFICATION CARDS - CONTACTLESS INTEGRATED CIRCUIT(S) CARDS - PART 2: DIMENSIONS AND LOCATION OF COUPLING AREAS
I.S. EN 27813:1993 IDENTIFICATION CARDS - FINANCIAL TRANSACTION CARDS
ANSI X9.107 : 2003 BANK CARDS-MAGNETIC STRIPE DATA CONTENT FOR TRACK 3
TS 131 122 : 13.0.0 UNIVERSAL MOBILE TELECOMMUNICATIONS SYSTEM (UMTS); LTE; UNIVERSAL SUBSCRIBER IDENTITY MODULE (USIM) CONFORMANCE TEST SPECIFICATION (3GPP TS 31.122 VERSION 14.0.0 RELEASE 14)
ISO/IEC 7816-2:2007 Identification cards — Integrated circuit cards — Part 2: Cards with contacts — Dimensions and location of the contacts
BS EN 1332-5:2006 Identification card systems. Man-machine interface Raised tactile symbols for differenciation of application on ID-1 cards
EN 1387:1996 Machine readable cards - Health care applications - Cards: General characteristics
DD ENV 14062-1:2001 Identification card systems. Surface transport applications. Electronic fee collection Physical characteristics, electronic signals and transmission protocols
BIS IS/ISO 21188 : 2006 PUBLIC KEY INFRASTRUCTURE FOR FINANCIAL SERVICES - PRACTICES AND POLICY FRAMEWORK
BS ISO/IEC 10536-1:2000 Identification cards. Contactless integrated circuit(s) cards Close-coupled cards. Physical characteristics
CSA ISO/IEC 7811-3 : 0 IDENTIFICATION CARDS - RECORDING TECHNIQUE - PART 3: LOCATION OF EMBOSSED CHARACTERS ON ID-1 CARDS
I.S. EN 27816-1:1991 IDENTIFICATION CARDS - INTEGRATED CIRCUIT(S) WITH CONTACTS - PART 1: PHYSICAL CHARACTERISTICS
ISO/IEC 7816-1:2011 Identification cards Integrated circuit cards Part 1: Cards with contacts Physical characteristics
I.S. EN ISO 10373:1995 IDENTIFICATION CARDS - TEST METHODS
ISO/TR 22411:2008 Ergonomics data and guidelines for the application of ISO/IEC Guide 71 to products and services to address the needs of older persons and persons with disabilities
ISO/IEC 7811-3:1995 Identification cards — Recording technique — Part 3: Location of embossed characters on ID-1 cards
EN 28583 : 1991 FINANCIAL TRANSACTION CARD ORIGINATED MESSAGES - INTERCHANGE MESSAGE SPECIFICATIONS
EN ISO/IEC 7813 : 1996 IDENTIFICATION CARDS - FINANCIAL TRANSACTION CARDS
EN 27816-1 : 1989 IDENTIFICATION CARDS - INTEGRATED CIRCUIT(S) WITH CONTACTS - PART 1: PHYSICAL CHARACTERISTICS
EN 27813:1992/AC:1992 IDENTIFICATION CARDS - FINANCIAL TRANSACTION CARDS
EN ISO/IEC 7811-3 : 1996 IDENTIFICATION CARDS - RECORDING TECHNIQUE - PART 3: LOCATION OF EMBOSSED CHARACTERS ON ID-1 CARDS
BS ISO 20302:2014 Health informatics. Health cards. Numbering system and registration procedure for issuer identifiers
05/30084397 DC : DRAFT MAY 2005 ISO 20302 - HEALTH INFORMATICS - HEALTH CARDS - NUMBERING SYSTEM AND REGISTRATION PROCEDURE FOR ISSUER IDENTIFIERS
BS ISO/IEC 18328-2:2015 Identification cards. ICC-managed devices Physical characteristics and test methods for cards with devices
PD CEN ISO/TR 22411:2011 Ergonomics data and guidelines for the application of ISO/IEC Guide 71 to products and services to address the needs of older persons and persons with disabilities
ISO/TR 13950:1997 Plastics pipes and fittings Automatic recognition systems for electrofusion
INCITS/ISO/IEC 10536-2 : 1995 IDENTIFICATION CARDS - CONTACTLESS INTEGRATED CIRCUIT(S) CARDS - PART 2: DIMENSIONS AND LOCATION OF COUPLING AREAS
INCITS/ISO/IEC 7816-1 : 2014 IDENTIFICATION CARDS - INTEGRATED CIRCUIT(S) CARDS WITH CONTACTS - PART 1: PHYSICAL CHARACTERISTICS
ANSI X9.1 : 1991 BANK CARDS - MAGNETIC STRIPE CONTENT FOR TRACK 3
06/30157189 DC : DRAFT OCT 2006 BS ISO/IEC 7816-2 - IDENTIFICATION CARDS - INTEGRATED CIRCUIT CARDS - PART 2: CARDS WITH CONTACTS - DIMENSIONS AND LOCATION OF THE CONTACTS
EN ISO/IEC 10536-1 : 1994 IDENTIFICATION CARDS - CONTACTLESS INTEGRATED CIRCUIT(S) CARDS - PART 1: PHYSICAL CHARACTERISTICS
INCITS/ISO/IEC 10536-1 : 1992 IDENTIFICATION CARDS - CONTACTLESS INTEGRATED CIRCUIT(S) CARDS - CLOSE COUPLED CARDS - PART 1: PHYSICAL CHARACTERISTICS
ISO/IEC 10536-3:1996 Identification cards Contactless integrated circuit(s) cards Part 3: Electronic signals and reset procedures
TS 102 230-2 : 9.0.0 SMART CARDS; UICC-TERMINAL INTERFACE; PHYSICAL, ELECTRICAL AND LOGICAL TEST SPECIFICATION; PART 2: UICC FEATURES (RELEASE 9)
TS 100 977 : 8.14.0 DIGITAL CELLULAR TELECOMMUNICATIONS SYSTEM (PHASE 2+); SPECIFICATION OF THE SUBSCRIBER IDENTITY MODULE - MOBILE EQUIPMENT (SIM-ME) INTERFACE
I.S. EN ISO/IEC 10536-1:1995 IDENTIFICATION CARDS - CONTACTLESS INTEGRATED CIRCUIT(S) CARDS - PART 1: PHYSICAL CHARACTERISTICS
TS 101 086 : 8.2.0 DIGITAL CELLULAR TELECOMMUNICATIONS SYSTEM (PHASE 2+); SUBSCRIBER IDENTITY MODULE (SIM) TEST SPECIFICATION
DIN EN 1332-5:2006-07 Identification card systems - Man-machine interface - Part 5: Raised tactile symbols for differentiation of application on ID-1 cards

ISO/IEC 14443-1:2016 Identification cards Contactless integrated circuit cards Proximity cards Part 1: Physical characteristics
ISO/IEC 10373-1:2006 Identification cards Test methods Part 1: General characteristics
ISO/IEC 7812-2:2017 Identification cards — Identification of issuers — Part 2: Application and registration procedures
ISO 1073-2:1976 Alphanumeric character sets for optical recognition Part 2: Character set OCR-B Shapes and dimensions of the printed image
ISO 1831:1980 Printing specifications for optical character recognition
ISO/IEC 7812-1:2017 Identification cards — Identification of issuers — Part 1: Numbering system
ISO/IEC 7810:2003 Identification cards Physical characteristics
ISO/IEC 7811-9:2015 Identification cards — Recording technique — Part 9: Tactile identifier mark
ISO 1073-1:1976 Alphanumeric character sets for optical recognition Part 1: Character set OCR-A Shapes and dimensions of the printed image
ISO/IEC 15693-1:2010 Identification cards Contactless integrated circuit cards Vicinity cards Part 1: Physical characteristics

View more information
US$73.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.