KTA 3204 : 2015
Current
Current
The latest, up-to-date edition.
| DevelopmentNote |
DRAFT 2017 issued in November 2017. (12/2017)
|
| DocumentType |
Standard
|
| PublisherName |
Kerntechnischer Ausschuss
|
| Status |
Current
|
| DIN 25435-4:2014-01 | In-service inspections for primary collant circuit components of light water reactors - Part 4: Visual testing |
| KTA 3101.3 : 2015(R2017) | DESIGN OF REACTOR CORES OF PRESSURIZED WATER AND BOILING WATER REACTORS - PART 3: MECHANICAL AND THERMAL DESIGN |
| DIN 25475-2:2009-05 | Nuclear facilities - Operational monitoring - Part 2: Vibration monitoring for early detection of changes in the vibrational behavior of the primary coolant circuit in pressurized water reactors |
| KTA 3103 : 2015(R2017) | SHUTDOWN SYSTEMS FOR LIGHT WATER REACTORS |
| DIN EN ISO 6892-2:2011-05 | METALLIC MATERIALS - TENSILE TESTING - PART 2: METHOD OF TEST AT ELEVATED TEMPERATURE |
| DIN EN 10216-5:2014-03 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes |
| DIN EN 1371-2:2015-04 | Founding - Liquid penetrant testing - Part 2: Investment castings; German version EN 1371-2:2015 |
| AD 2000-MERKBLATT B6:2006 | CYLINDRICAL SHELLS SUBJECTED TO EXTERNAL OVERPRESSURE |
| DIN EN ISO 6847:2013-11 | WELDING CONSUMABLES - DEPOSITION OF A WELD METAL PAD FOR CHEMICAL ANALYSIS (ISO 6847:2013) |
| DIN EN ISO 9606-1:2013-12 | QUALIFICATION TESTING OF WELDERS - FUSION WELDING - PART 1: STEELS (ISO 9606-1:2012 INCLUDING COR 1:2012 AND COR 2:2013) |
| AD 2000-MERKBLATT HP0:2017 | GENERAL PRINCIPLES OF DESIGN, MANUFACTURE AND ASSOCIATED TESTS |
| DIN EN 12668-2:2010-06 | Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 2: Probes |
| DIN EN ISO 14343:2017-08 | WELDING CONSUMABLES - WIRE ELECTRODES, STRIP ELECTRODES, WIRES AND RODS FOR ARC WELDING OF STAINLESS AND HEAT RESISTING STEELS - CLASSIFICATION (ISO 14343:2017) |
| DIN EN 10283:2010-06 | CORROSION RESISTANT STEEL CASTINGS |
| DIN EN 12668-1:2010-05 | Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 1: Instruments |
| DIN EN 12681:2003-06 | FOUNDING - RADIOGRAPHIC EXAMINATION |
| DIN EN ISO 3581:2015-04 (Draft) | WELDING CONSUMABLES - COVERED ELECTRODES FOR MANUAL METAL ARC WELDING OF STAINLESS AND HEAT-RESISTING STEELS - CLASSIFICATION (ISO 3581:2016, CORRECTED VERSION 2017-11-01) |
| DIN EN ISO 19232-1:2013-12 | Non-destructive testing - Image quality of radiographs - Part 1: Determination of the image quality value using wire-type image quality indicators (ISO 19232-1:2013) |
| DIN EN ISO 3269:2000-11 | FASTENERS - ACCEPTANCE INSPECTION |
| DIN EN ISO 9692-1:2013-12 | WELDING AND ALLIED PROCESSES - TYPES OF JOINT PREPARATION - PART 1: MANUAL METAL-ARC WELDING, GAS-SHIELDED METAL-ARC WELDING, GAS WELDING, TIG WELDING AND BEAM WELDING OF STEELS (ISO 9692-1:2013) |
| DIN EN ISO 18274:2011-04 | Welding consumables - Solid wire electrodes, solid strip electrodes, solid wires and solid rods for fusion welding of nickel and nickel alloys - Classification (ISO 18274:2010) |
| DIN EN ISO 3452-3:2014-03 | NON-DESTRUCTIVE TESTING - PENETRANT TESTING - PART 3: REFERENCE TEST BLOCKS (ISO 3452-3:2013) |
| DIN EN ISO 14732:2013-12 | WELDING PERSONNEL - QUALIFICATION TESTING OF WELDING OPERATORS AND WELD SETTERS FOR MECHANIZED AND AUTOMATIC WELDING OF METALLIC MATERIALS (ISO 14732:2013) |
| DIN EN 13018:2016-06 | NON-DESTRUCTIVE TESTING - VISUAL TESTING - GENERAL PRINCIPLES |
| DIN EN ISO 898-1:2013-05 | MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 1: BOLTS, SCREWS AND STUDS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD (ISO 898-1:2013) |
| DIN 2093:2013-02 | DISC SPRINGS - QUALITY SPECIFICATIONS - DIMENSIONS |
| DIN 25475-2:2009-05 | Nuclear facilities - Operational monitoring - Part 2: Vibration monitoring for early detection of changes in the vibrational behavior of the primary coolant circuit in pressurized water reactors |
| DIN EN 10028-7:2016-10 | FLAT PRODUCTS MADE OF STEELS FOR PRESSURE PURPOSES - PART 7: STAINLESS STEELS |
| DIN EN ISO 14172:2016-02 | Welding consumables - Covered electrodes for manual metal arc welding of nickel and nickel alloys - Classification (ISO 14172:2015) |
| DIN EN 12668-3:2014-02 | Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 3: Combined equipment |
| DIN EN 10025-2:2011-04 (Draft) | HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON-ALLOY STRUCTURAL STEELS |
| DIN EN 10250-1:1999-12 | Open die steel forgings for general engineering purposes - Part 1: General requirements |
| DIN EN ISO 6506-1:2015-02 | METALLIC MATERIALS - BRINELL HARDNESS TEST - PART 1: TEST METHOD (ISO 6506-1:2014) |
| DIN 25435-4:2014-01 | In-service inspections for primary collant circuit components of light water reactors - Part 4: Visual testing |
| DIN EN ISO 3506-1:2010-04 | MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 1: BOLTS, SCREWS AND STUDS |
| DIN EN ISO 17641-2:2016-03 | DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS - HOT CRACKING TESTS FOR WELDMENTS - ARC WELDING PROCESSES - PART 2: SELFRESTRAINT TESTS (ISO 176412:2015) |
| DIN EN ISO 6892-1:2017-02 | METALLIC MATERIALS - TENSILE TESTING - PART 1: METHOD OF TEST AT ROOM TEMPERATURE (ISO 6892-1:2016) |
| DIN EN ISO 11126-7:1999-07 | PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - SPECIFICATIONS FOR NON-METALLIC BLAST-CLEANING ABRASIVES - PART 7: FUSED ALUMINIUM OXIDE |
| DIN EN 10222-5:2013-01 (Draft) | STEEL FORGINGS FOR PRESSURE PURPOSES - PART 5: MARTENSITIC, AUSTENITIC AND AUSTENITIC-FERRITIC STAINLESS STEELS |
| DIN EN 10217-7:2015-01 | Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes |
| DIN EN ISO 9017:2013-12 | DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS - FRACTURE TEST (ISO 9017:2017) |
| DIN EN ISO 10893-10:2011-07 | NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 10: AUTOMATED FULL PERIPHERAL ULTRASONIC TESTING OF SEAMLESS AND WELDED (EXCEPT SUBMERGED ARC-WELDED) STEEL TUBES FOR THE DETECTION OF LONGITUDINAL AND/OR TRANSVERSE IMPERFECTIONS |
| DIN EN ISO 148-1:2015-09 (Draft) | METALLIC MATERIALS - CHARPY PENDULUM IMPACT TEST - PART 1: TEST METHOD (ISO 148-1:2016) |
| DIN EN ISO 4136:2013-02 | Destructive tests on welds in metallic materials - Transverse tensile test (ISO 4136:2012) |
| DIN 267-2:2016-01 (Draft) | FASTENERS - TECHNICAL SPECIFICATION, SURFACE ROUGHNESS FOR PRODUCT CLASSES A AND B |
| DIN EN 10213:2016-10 | STEEL CASTINGS FOR PRESSURE PURPOSES |
| DIN EN ISO 643:2015-06 (Draft) | STEELS - MICROGRAPHIC DETERMINATION OF THE APPARENT GRAIN SIZE (ISO 643:2012) |
| DIN EN 10204:2005-01 | Metallic products - Types of inspection documents; German version EN 10204:2004 |
| DIN EN ISO 3506-2:2010-04 | MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 2: NUTS |
| DIN EN ISO 5173:2012-02 | Destructive tests on welds in metallic materials - Bend tests (ISO 5173:2009 + Amd. 1:2011) |
| DIN EN ISO 8249:2000-10 | WELDING - DETERMINATION OF FERRITE NUMBER (FN) IN AUSTENITIC AND DUPLEX FERRITIC-AUSTENITIC CR-NI STAINLESS STEEL WELD METALS |
| DIN CEN ISO/TR 15608;DIN SPEC 8517:2013-08 | WELDING - GUIDELINES FOR A METALLIC MATERIALS GROUPING SYSTEM (ISO/TR 15608:2013) |
| DIN EN ISO 3452-2:2014-03 | Non-destructive testing - Penetrant testing - Part 2: Testing of penetrant materials (ISO 3452-2:2013) |
| AD 2000-Merkblatt B 0:2014-11 | DESIGN OF PRESSURE VESSELS |
| DIN EN ISO 14175:2008-06 | WELDING CONSUMABLES - GASES AND GAS MIXTURES FOR FUSION WELDING AND ALLIED PROCESSES |
| DIN 8201-7:1985-07 | SYNTHETIC MINERAL ABRASIVES; GLASS BEADS |
| DIN EN ISO 17637:2015-05 (Draft) | NON-DESTRUCTIVE TESTING OF WELDS - VISUAL TESTING OF FUSION-WELDED JOINTS (ISO 17637:2016) |
| DIN EN 1370:2012-03 | FOUNDING - EXAMINATION OF SURFACE CONDITION |
| DIN EN ISO 17633:2016-02 (Draft) | WELDING CONSUMABLES - TUBULAR CORED ELECTRODES AND RODS FOR GAS SHIELDED AND NON-GAS SHIELDED METAL ARC WELDING OF STAINLESS AND HEAT-RESISTING STEELS - CLASSIFICATION |
| DIN EN ISO 6508-1:2016-12 | Metallic materials - Rockwell hardness test - Part 1: Test method (ISO 6508-1:2016); German version EN ISO 6508-1:2016 |
| DIN 25410:2012-07 | Nuclear facilities - Surface cleanliness of components |
| DIN EN ISO 17636-2:2013-05 | Non-destructive testing of welds - Radiographic testing - Part 2: X- and gamma-ray techniques with digital detectors (ISO 17636-2:2013) |
| DIN EN 13445-3:2015-12 | UNFIRED PRESSURE VESSELS - PART 3: DESIGN |
| DIN EN 10049:2014-03 | Measurement of roughness average Ra and peak count RPc on metallic flat products |
| DIN EN ISO 9606-4:1999-06 | APPROVAL TESTING OF WELDERS - FUSION WELDING - PART 4: NICKEL AND NICKEL ALLOYS |
| DIN 25475-1:2013-01 | NUCLEAR FACILITIES - OPERATIONAL MONITORING - PART 1: MONITORING OF STRUCTURE-BORNE SOUND FOR LOOSE PARTS DETECTION |
| DIN EN ISO 15792-1:2012-01 | WELDING CONSUMABLES - TEST METHODS - PART 1: TEST METHODS FOR ALL-WELD METAL TEST SPECIMENS IN STEEL, NICKEL AND NICKEL ALLOYS (ISO 15792-1:2000 + AMD 1:2011) |
| DIN EN ISO 5579:2014-04 | NON-DESTRUCTIVE TESTING - RADIOGRAPHIC TESTING OF METALLIC MATERIALS USING FILM AND X- OR GAMMA RAYS - BASIC RULES (ISO 5579:2013) |
| DIN EN ISO 17636-1:2013-05 | Non-destructive testing of welds - Radiographic testing - Part 1: X- and gamma-ray techniques with film (ISO 17636-1:2013) |
| DIN EN ISO 19232-3:2014-02 | NON-DESTRUCTIVE TESTING - IMAGE QUALITY OF RADIOGRAPHS - PART 3: IMAGE QUALITY CLASSES (ISO 19232-3:2013) |
| DIN EN 10272:2016-10 | STAINLESS STEEL BARS FOR PRESSURE PURPOSES |
| DIN ISO 7802:2014-11 | METALLIC MATERIALS - WIRE - WRAPPING TEST (ISO 7802:2013) |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.