Name: KTA 3211.1 : 2015
Brand: KTA

KTA 3211.1 : 2015

Superseded

View Superseded by

PRESSURE AND ACTIVITY RETAINING COMPONENTS OF SYSTEMS OUTSIDE THE PRIMARY CIRCUIT - PART 1: MATERIALS

Superseded date

07-04-2019

Published date

01-12-2013

Publisher

Kerntechnischer Ausschuss

Fundamentals
1 Scope
2 Definitions
3 General principles
4 Generally applicable stipulations for materials and
   material tests
5 Product forms of ferritic steels of material group W I
6 Product forms of ferritic steels of material group W II
7 Product forms of austenitic steels
8 Bolts and nuts
9 Product forms of steels for special loads
10 Heat-exchanger tubes
11 Non-destructive tests and examinations
Annex A: Material characteristic data
Annex AP: Reference data on physical characteristics
Annex B: Production welds of steel castings
Annex C: Procedure for determining the delta ferrite
         content
Annex D: Performance of manual ultrasonic testing
Annex E: Performance of surface inspections by magnetic
         particle and penetrant methods
Annex F: Regulations and literature referred to in this
         Safety Standard
Annex G: Changes with respect to the edition 2000-06
         (informative)

Pertains to the materials and product forms of the pressure-retaining walls of pressure- and activity-containing light-water-reactor systems and components that do not belong to the reactor-coolant pressure boundary but have relevance specifically to reactor engineered safety.

DevelopmentNote	DRAFT 2017 issued in November 2017. (12/2017)
DocumentType	Standard
PublisherName	Kerntechnischer Ausschuss
Status	Superseded
SupersededBy	KTA 3211.1 : 2017 & Berichtigung:2019

KTA 3407 : 2014	PIPE PENETRATIONS THROUGH THE REACTOR CONTAINMENT VESSEL
KTA 3103 : 2015(R2017)	SHUTDOWN SYSTEMS FOR LIGHT WATER REACTORS
KTA 3206 : 2014(R2017)Berichtigung:2019	BREAK PRECLUSION VERIFICATIONS FOR PRESSURE-RETAINING COMPONENTS IN NUCLEAR POWER PLANTS

ISO 6507-1:2005	Metallic materials Vickers hardness test Part 1: Test method
EN ISO 14284:2002	Steel and iron - Sampling and preparation of samples for the determination of chemical composition (ISO 14284:1996)
EN ISO 4287:1998/A1:2009	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - TERMS, DEFINITIONS AND SURFACE TEXTURE PARAMETERS
EN ISO 7963:2010	Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 2 (ISO 7963:2006)
DIN EN ISO 6892-2:2011-05	METALLIC MATERIALS - TENSILE TESTING - PART 2: METHOD OF TEST AT ELEVATED TEMPERATURE
EN ISO 3452-2:2013	NON-DESTRUCTIVE TESTING - PENETRANT TESTING - PART 2: TESTING OF PENETRANT MATERIALS (ISO 3452-2:2013)
ISO 898-2:2012	Mechanical properties of fasteners made of carbon steel and alloy steel — Part 2: Nuts with specified property classes — Coarse thread and fine pitch thread
EN 10269:2013	Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties
ISO 10893-3:2011	Non-destructive testing of steel tubes Part 3: Automated full peripheral flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal and/or transverse imperfections
EN ISO 10893-5:2011	Non-destructive testing of steel tubes - Part 5: Magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections (ISO 10893-5:2011)
DIN EN 10216-5:2014-03	Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes
EN 26157-3 : 1991	FASTENERS - SURFACE DISCONTINUITIES - PART 3: BOLTS, SCREWS AND STUDS FOR SPECIAL REQUIREMENTS (ISO 6157-3:1988)
ISO 8496:2013	Metallic materials Tube Ring tensile test
EN 12668-2:2010	Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 2: Probes
EN ISO 6506-1:2014	Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:2014)
VDTUEV 354/3 WERKSTOFFBLAETTER : 2013 SUPP 2015	WERKSTOFFBLAETTER - SCHWEISSGEEIGNETE FEINKORNBAUSTAEHLE MIT EINER MINDESTSTRECKGRENZE VON 355 MPA FLANSCH, RING, HOHLKOERPER, SCHMIEDESTUECK, STABSTAHL
EN ISO 8493 : 2004	Metallic materials - Tube - Drift-expanding test (ISO 8493:1998)
ISO 2400:2012	Non-destructive testing — Ultrasonic testing — Specification for calibration block No. 1
ISO 10893-5:2011	Non-destructive testing of steel tubes Part 5: Magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections
ISO 6506-1:2014	Metallic materials Brinell hardness test Part 1: Test method
DIN EN ISO 10484:2014-06 (Draft)	WIDENING TEST ON NUTS
DIN EN ISO 6507-1:2016-08 (Draft)	METALLIC MATERIALS - VICKERS HARDNESS TEST - PART 1: TEST METHOD
ISO 4287:1997	Geometrical Product Specifications (GPS) — Surface texture: Profile method — Terms, definitions and surface texture parameters
EN 12680-2:2003	Founding - Ultrasonic examination - Part 2: Steel castings for highly stressed components
ISO 6507-4:2005	Metallic materials Vickers hardness test Part 4: Tables of hardness values
EN ISO 19232-3:2013	Non-destructive testing - Image quality of radiographs - Part 3: Image quality classes (ISO 19232-3:2013)
ISO 3506-1:2009	Mechanical properties of corrosion-resistant stainless steel fasteners Part 1: Bolts, screws and studs
DIN EN 10222-2:2013-01 (Draft)	STEEL FORGINGS FOR PRESSURE PURPOSES - PART 2: FERRITIC AND MARTENSITIC STEELS WITH SPECIFIED ELEVATED TEMPERATURES PROPERTIES
EN ISO 10484:2004	Widening test on nuts (ISO 10484:1997)
DIN EN ISO 10893-8:2011-07	NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 8: AUTOMATED ULTRASONIC TESTING OF SEAMLESS AND WELDED STEEL TUBES FOR THE DETECTION OF LAMINAR IMPERFECTIONS
EN 10228-4:2016	Non-destructive testing of steel forgings - Part 4: Ultrasonic testing of austenitic and austenitic-ferritic stainless steel forgings
EN ISO 3452-1:2013	Non-destructive testing - Penetrant testing - Part 1: General principles (ISO 3452-1:2013, Corrected version 2014-05-01)
EN 10216-5:2013	Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes
DIN EN ISO 9606-1:2013-12	QUALIFICATION TESTING OF WELDERS - FUSION WELDING - PART 1: STEELS (ISO 9606-1:2012 INCLUDING COR 1:2012 AND COR 2:2013)
EN 10213:2007+A1:2016	Steel castings for pressure purposes
DIN EN 12668-2:2010-06	Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 2: Probes
EN ISO 6892-1:2016	Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016)
DIN EN 10228-1:2016-10	NON-DESTRUCTIVE TESTING OF STEEL FORGINGS - PART 1: MAGNETIC PARTICLE INSPECTION
EN 10028-3:2017	Flat products made of steels for pressure purposes - Part 3: Weldable fine grain steels, normalized
KTA 3211.3 : 2012 COR 2016	PRESSURE AND ACTIVITY RETAINING COMPONENTS OF SYSTEMS OUTSIDE THE PRIMARY CIRCUIT - PART 3: MANUFACTURE
ISO 9712:2012	Non-destructive testing Qualification and certification of NDT personnel
EN 10273:2016	Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties
EN ISO 3506-1:2009	Mechanical properties of corrosion-resistant stainless steel fasteners - Part 1: Bolts, screws and studs (ISO 3506-1:2009)
EN 10228-2:2016	Non-destructive testing of steel forgings - Part 2: Penetrant testing
ISO 3059:2012	Non-destructive testing — Penetrant testing and magnetic particle testing — Viewing conditions
VDTUEV 354/1 WERKSTOFFBLAETTER : 2017 SUPP 2017	WERKSTOFFBLAETTER - SCHWEISSGEEIGNETE FEINKORNBAUSTAEHLE MIT EINER MINDESTSTRECKGRENZE VON 355 MPA BLECH, BREITFLACHSTAHL, BAND, FORM- UND STABSTAHL
DIN EN 12668-1:2010-05	Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 1: Instruments
EN ISO 10893-10:2011	Non-destructive testing of steel tubes - Part 10: Automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections (ISO 10893-10:2011)
DIN EN 12681:2003-06	FOUNDING - RADIOGRAPHIC EXAMINATION
EN 10164:2004	Steel products with improved deformation properties perpendicular to the surface of the product - Technical delivery conditions
EN ISO 5173:2010/A1:2011	DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS - BEND TESTS (ISO 5173:2009)
EN ISO 3452-3:2013	NON-DESTRUCTIVE TESTING - PENETRANT TESTING - PART 3: REFERENCE TEST BLOCKS (ISO 3452-3:2013)
DIN EN ISO 19232-1:2013-12	Non-destructive testing - Image quality of radiographs - Part 1: Determination of the image quality value using wire-type image quality indicators (ISO 19232-1:2013)
ISO 14174:2012	Welding consumables — Fluxes for submerged arc welding and electroslag welding — Classification
EN ISO 8495:2013	Metallic materials - Tube - Ring-expanding test (ISO 8495:2013)
EN ISO 643:2012	Steels - Micrographic determination of the apparent grain size (ISO 643:2012)
DIN EN ISO 2400:2013-01	Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 1 (ISO 2400:2012)
DIN EN ISO 3452-3:2014-03	NON-DESTRUCTIVE TESTING - PENETRANT TESTING - PART 3: REFERENCE TEST BLOCKS (ISO 3452-3:2013)
ISO 10893-8:2011	Non-destructive testing of steel tubes Part 8: Automated ultrasonic testing of seamless and welded steel tubes for the detection of laminar imperfections
DIN EN ISO 6507-4:2016-08 (Draft)	METALLIC MATERIALS - VICKERS HARDNESS TEST - PART 4: TABLES OF HARDNESS VALUES
EN ISO 8496:2013	Metallic materials - Tube - Ring tensile test (ISO 8496:2013)
ISO 2560:2009	Welding consumables Covered electrodes for manual metal arc welding of non-alloy and fine grain steels Classification
DIN EN 10216-3:2014-03	SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 3: ALLOY FINE GRAIN STEEL TUBES
ISO 10484:1997	Widening test on nuts
ISO 6892-1:2016	Metallic materials Tensile testing Part 1: Method of test at room temperature
EN ISO 9934-3:2015	Non-destructive testing - Magnetic particle testing - Part 3: Equipment (ISO 9934-3:2015)
DIN EN 13018:2016-06	NON-DESTRUCTIVE TESTING - VISUAL TESTING - GENERAL PRINCIPLES
DIN EN ISO 898-1:2013-05	MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 1: BOLTS, SCREWS AND STUDS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD (ISO 898-1:2013)
DIN EN ISO 8495:2014-03	METALLIC MATERIALS - TUBE - RING-EXPANDING TEST (ISO 8495:2013)
DIN EN ISO 7963:2010-12	Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 2 (ISO 7963:2006)
EN ISO 8249:2000	Welding - Determination of Ferrite Number (FN) in austenitic and duplex ferritic-austenitic Cr-Ni stainless steel weld metals (ISO 8249:2000)
EN ISO 10893-3:2011	Non-destructive testing of steel tubes - Part 3: Automated full peripheral flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal and/or transverse imperfections (ISO 10893-3:2011)
DIN EN ISO 8492:2014-03	Metallic materials – Tube – Flattening test (ISO 8492:2013); German version EN ISO 8492:2013<br>
DIN EN ISO 13916:1996-11	WELDING - MEASUREMENT OF PREHEATING TEMPERATURE, INTERPASS TEMPERATURE AND PREHEAT MAINTENANCE TEMPERATURE (ISO 13916:2017)
ISO 9606-1:2012	Qualification testing of welders — Fusion welding — Part 1: Steels
EN ISO 6506-4:2014	Metallic materials - Brinell hardness test - Part 4: Table of hardness values (ISO 6506-4:2014)
EN 1330-4:2010	Non-destructive testing - Terminology - Part 4: Terms used in ultrasonic testing
DIN EN 10028-7:2016-10	FLAT PRODUCTS MADE OF STEELS FOR PRESSURE PURPOSES - PART 7: STAINLESS STEELS
ISO 8493:1998	Metallic materials Tube Drift-expanding test
DIN EN 12668-3:2014-02	Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 3: Combined equipment
EN 10216-2:2013	Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties
DIN EN 10228-3:2016-10	NON-DESTRUCTIVE TESTING OF STEEL FORGINGS - PART 3: ULTRASONIC TESTING OF FERRITIC OR MARTENSITIC STEEL FORGINGS
EN 12668-1:2010	Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 1: Instruments
DIN EN ISO 6506-1:2015-02	METALLIC MATERIALS - BRINELL HARDNESS TEST - PART 1: TEST METHOD (ISO 6506-1:2014)
DIN EN ISO 3506-1:2010-04	MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 1: BOLTS, SCREWS AND STUDS
EN ISO 10893-8:2011	Non-destructive testing of steel tubes - Part 8: Automated ultrasonic testing of seamless and welded steel tubes for the detection of laminar imperfections (ISO 10893-8:2011)
ISO 5173:2009	Destructive tests on welds in metallic materials — Bend tests
DIN EN ISO 9934-1:2016-07 (Draft)	NON-DESTRUCTIVE TESTING - MAGNETIC PARTICLE TESTING - PART 1: GENERAL PRINCIPLES (ISO 9934-1:2016)
ISO 5579:2013	Non-destructive testing — Radiographic testing of metallic materials using film and X- or gamma rays — Basic rules
EN 10028-2:2017	Flat products made of steels for pressure purposes - Part 2: Non-alloy and alloy steels with specified elevated temperature properties
DIN EN ISO 6892-1:2017-02	METALLIC MATERIALS - TENSILE TESTING - PART 1: METHOD OF TEST AT ROOM TEMPERATURE (ISO 6892-1:2016)
EN 10228-1:1999	Non-destructive testing of steel forgings - Part 1: Magnetic particle inspection
EN ISO 9712:2012	Non-destructive testing - Qualification and certification of NDT personnel (ISO 9712:2012)
DIN EN 10222-5:2013-01 (Draft)	STEEL FORGINGS FOR PRESSURE PURPOSES - PART 5: MARTENSITIC, AUSTENITIC AND AUSTENITIC-FERRITIC STAINLESS STEELS
DIN EN 10217-7:2015-01	Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes
AD 2000-MERKBLATT W5:2009	CAST STEEL
EN 10028-7:2016	Flat products made of steels for pressure purposes - Part 7: Stainless steels
EN ISO 1127:1996	Stainless steel tubes - Dimensions, tolerances and conventional masses per unit length (ISO 1127:1992)
ISO 148-1:2016	Metallic materials — Charpy pendulum impact test — Part 1: Test method
DIN EN ISO 10893-10:2011-07	NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 10: AUTOMATED FULL PERIPHERAL ULTRASONIC TESTING OF SEAMLESS AND WELDED (EXCEPT SUBMERGED ARC-WELDED) STEEL TUBES FOR THE DETECTION OF LONGITUDINAL AND/OR TRANSVERSE IMPERFECTIONS
DIN EN ISO 148-1:2015-09 (Draft)	METALLIC MATERIALS - CHARPY PENDULUM IMPACT TEST - PART 1: TEST METHOD (ISO 148-1:2016)
EN 10308:2001	Non destructive testing - Ultrasonic testing of steel bars
DIN EN ISO 1127:1997-03	STAINLESS STEEL TUBES - DIMENSIONS, TOLERANCES AND CONVENTIONAL MASSES PER UNIT LENGTH
ISO 3452-1:2013	Non-destructive testing Penetrant testing Part 1: General principles
EN ISO 9934-1:2016	Non-destructive testing - Magnetic particle testing - Part 1: General principles (ISO 9934-1:2016)
DIN EN ISO 4136:2013-02	Destructive tests on welds in metallic materials - Transverse tensile test (ISO 4136:2012)
EN ISO 14174:2012	Welding consumables - Fluxes for submerged arc welding and electroslag welding - Classification (ISO 14174:2012)
EN 10163-2:2004	Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections - Part 2: Plate and wide flats
EN ISO 11699-1:2011	Non-destructive testing - Industrial radiographic film - Part 1: Classification of film systems for industrial radiography (ISO 11699-1:2008)
EN ISO 11970:2016	Specification and qualification of welding procedures for production welding of steel castings (ISO 11970:2016)
DIN EN 1371-1:2012-02	Founding - Liquid penetrant testing - Part 1: Sand, gravity die and low pressure die castings
EN ISO 19232-1:2013	Non-destructive testing - Image quality of radiographs - Part 1: Determination of the image quality value using wire-type image quality indicators (ISO 19232-1:2013)
EN 10217-7:2014	Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes
KTA 1401 : 2013	GENERAL REQUIREMENTS REGARDING QUALITY ASSURANCE
EN ISO 2400:2012	Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 1 (ISO 2400:2012)
EN ISO 10893-4:2011	Non-destructive testing of steel tubes - Part 4: Liquid penetrant inspection of seamless and welded steel tubes for the detection of surface imperfections (ISO 10893-4:2011)
EN 10272:2016	Stainless steel bars for pressure purposes
ISO 3452-3:2013	Non-destructive testing — Penetrant testing — Part 3: Reference test blocks
DIN EN 10213:2016-10	STEEL CASTINGS FOR PRESSURE PURPOSES
DIN EN ISO 643:2015-06 (Draft)	STEELS - MICROGRAPHIC DETERMINATION OF THE APPARENT GRAIN SIZE (ISO 643:2012)
DIN EN 10216-2:2014-03	SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES
EN ISO 5579:2013	Non-destructive testing - Radiographic testing of metallic materials using film and X- or gamma rays - Basic rules (ISO 5579:2013)
DIN EN ISO 10893-2:2011-07	NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 2: AUTOMATED EDDY CURRENT TESTING OF SEAMLESS AND WELDED (EXCEPT SUBMERGED ARC-WELDED) STEEL TUBES FOR THE DETECTION OF IMPERFECTIONS
DIN 50104:1983-11	TESTING OF HOLLOW BODIES BY INTERNAL PRESSURE; LEAK DETECTION UP TO A CERTAIN PRESSURE VALUE; GENERAL SPECIFICATIONS
EN 1370:2011	Founding - Examination of surface condition
ISO 3452-2:2013	Non-destructive testing Penetrant testing Part 2: Testing of penetrant materials
ISO 19232-3:2013	Non-destructive testing — Image quality of radiographs — Part 3: Image quality classes
DIN EN 10228-2:2016-10	NON-DESTRUCTIVE TESTING OF STEEL FORGINGS - PART 2: PENETRANT TESTING
DIN EN 10204:2005-01	Metallic products - Types of inspection documents; German version EN 10204:2004
DIN EN ISO 10893-5:2011-07	Non-destructive testing of steel tubes - Part 5: Magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections (ISO 10893-5:2011); German version EN ISO 10893-5:2011
DIN EN ISO 3059:2013-03	NON-DESTRUCTIVE TESTING - PENETRANT TESTING AND MAGNETIC PARTICLE TESTING - VIEWING CONDITIONS (ISO 3059:2012)
EN 10222-5:2017	Steel forgings for pressure purposes - Part 5: Martensitic, austenitic and austenitic-ferritic stainless steels
EN 10228-3:2016	Non-destructive testing of steel forgings - Part 3: Ultrasonic testing of ferritic or martensitic steel forgings
ISO 11970:2016	Specification and qualification of welding procedures for production welding of steel castings
VDTUEV 452 WERKSTOFFBLAETTER : 2011	Martensitic steel casting G-X4 CrNi 13 4 / GX 3 CrNi 13 4 Material no.1.4317 / material no.1,6982 hollow castings, solid castings, cast valve housings, pump housings, impellers and guide wheels, machine parts for hydraulic systems
DIN EN ISO 8496:2014-03	METALLIC MATERIALS - TUBE - RING TENSILE TEST (ISO 8496:2013)
EN 1559-2:2014	Founding - Technical conditions of delivery - Part 2: Additional requirements for steel castings
DIN EN 1330-4:2010-05	NON-DESTRUCTIVE TESTING - TERMINOLOGY - PART 4: TERMS USED IN ULTRASONIC TESTING
EN ISO 10893-2:2011	Non-destructive testing of steel tubes - Part 2: Automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections (ISO 10893-2:2011)
EN 1371-1:2011	Founding - Liquid penetrant testing- Part 1: Sand, gravity die and low pressure die castings
VDTUEV 113/2 WERKSTOFFBLAETTER : 2001 SUPP 2001	WERKSTOFFBLAETTER - HOCHWARMFESTER AUSTENITISCHER WALZ- UND SCHMIEDESTAHL X8CRNIMOBNB16-16+WK, WERKSTOFF-NR. 1.4986+WK
ISO 3651-2:1998	Determination of resistance to intergranular corrosion of stainless steels — Part 2: Ferritic,austenitic and ferritic-austenitic (duplex) stainless steels — Corrosion test in media containing sulfuric acid
EN ISO 2560:2009	Welding consumables - Covered electrodes for manual metal arc welding of non-alloy and fine grain steels - Classification (ISO 2560:2009)
DIN EN ISO 3506-2:2010-04	MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 2: NUTS
DIN EN ISO 5173:2012-02	Destructive tests on welds in metallic materials - Bend tests (ISO 5173:2009 + Amd. 1:2011)
DIN EN ISO 8249:2000-10	WELDING - DETERMINATION OF FERRITE NUMBER (FN) IN AUSTENITIC AND DUPLEX FERRITIC-AUSTENITIC CR-NI STAINLESS STEEL WELD METALS
ISO 11699-1:2008	Non-destructive testing — Industrial radiographic film — Part 1: Classification of film systems for industrial radiography
EN 10222-4:2017	Steel forgings for pressure purposes - Part 4: Weldable fine grain steels with high proof strength
DIN EN ISO 3452-2:2014-03	Non-destructive testing - Penetrant testing - Part 2: Testing of penetrant materials (ISO 3452-2:2013)
ISO 9934-1:2016	Non-destructive testing — Magnetic particle testing — Part 1: General principles
KTA 1408.2 : 2015	QUALITY ASSURANCE OF WELD FILLER METALS AND WELDING CONSUMABLES FOR PRESSURE AND ACTIVITY-RETAINING SYSTEMS IN NUCLEAR POWER PLANTS - PART 2: MANUFACTURE
ISO 6506-4:2014	Metallic materials — Brinell hardness test — Part 4: Table of hardness values
EN 10222-2:2017	Steel forgings for pressure purposes - Part 2: Ferritic and martensitic steels with specified elevated temperatures properties
ISO 8495:2013	Metallic materials Tube Ring-expanding test
EN 10204:2004	Metallic products - Types of inspection documents
DIN EN 10228-4:2016-10	NON-DESTRUCTIVE TESTING OF STEEL FORGINGS - PART 4: ULTRASONIC TESTING OF AUSTENITIC AND AUSTENITIC-FERRITIC STAINLESS STEEL FORGINGS
EN 10307:2001	Non-destructive testing - Ultrasonic testing of austenitic and austenitic-ferritic stainless steels flat products of thickness equal to or greater than 6 mm (reflection method)
EN ISO 6892-2:2011	Metallic materials - Tensile testing - Part 2: Method of test at elevated temperature (ISO 6892-2:2011)
EN ISO 3651-2 : 1998	DETERMINATION OF RESISTANCE TO INTERGRANULAR CORROSION OF STAINLESS STEELS - FERRITIC, AUSTENITIC AND FERRITIC-AUSTENITIC (DUPLEX) STAINLESS STEELS - CORROSION TEST IN MEDIA CONTAINING SULFURIC ACID
ISO 643:2012	Steels Micrographic determination of the apparent grain size
ISO 9934-2:2015	Non-destructive testing — Magnetic particle testing — Part 2: Detection media
DIN EN 1370:2012-03	FOUNDING - EXAMINATION OF SURFACE CONDITION
EN 1369:2012	Founding - Magnetic particle testing
DIN EN ISO 10893-4:2011-07	Non-destructive testing of steel tubes - Part 4: Liquid penetrant inspection of seamless and welded steel tubes for the detection of surface imperfections (ISO 10893-4:2011)
ISO 19232-1:2013	Non-destructive testing — Image quality of radiographs — Part 1: Determination of the image quality value using wire-type image quality indicators
EN ISO 898-1:2013	Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread (ISO 898-1:2013)
ISO 8492:2013	Metallic materials Tube Flattening test
ISO 9934-3:2015	Non-destructive testing — Magnetic particle testing — Part 3: Equipment
DIN EN ISO 9934-3:2015-12	NON-DESTRUCTIVE TESTING - MAGNETIC PARTICLE TESTING - PART 3: EQUIPMENT (ISO 9934-3:2015)
ISO 6157-2:1995	Fasteners Surface discontinuities Part 2: Nuts
SEW 088 : 2017	WELDABLE NON-ALLOY AND LOW-ALLOY STEELS - RECOMMENDATIONS FOR PROCESSING, IN PARTICULAR FOR FUSION WELDING
DIN EN ISO 11699-1:2012-01	Non-destructive testing - Industrial radiographic films - Part 1: Classification of film systems for industrial radiography (ISO 11699-1:2008)
EN 12681 : 2003	FOUNDING - RADIOGRAPHIC EXAMINATION
EN 13018:2016	NON-DESTRUCTIVE TESTING - VISUAL TESTING - GENERAL PRINCIPLES
ISO 6892-2:2011	Metallic materials Tensile testing Part 2: Method of test at elevated temperature
DIN EN 10222-4:2013-01 (Draft)	STEEL FORGINGS FOR PRESSURE PURPOSES - PART 4: WELDABLE FINE GRAIN STEELS WITH HIGH PROOF STRENGTH
EN ISO 4136:2012	Destructive tests on welds in metallic materials - Transverse tensile test (ISO 4136:2012)
AD MERKBLATT W2 : 2000	MATERIALS - AUSTENITIC STEELS
EN ISO 9934-2:2015	Non-destructive testing - Magnetic particle testing - Part 2: Detection media (ISO 9934-2:2015)
DIN EN 10269:2014-02	STEELS AND NICKEL ALLOYS FOR FASTENERS WITH SPECIFIED ELEVATED AND/OR LOW TEMPERATURE PROPERTIES
EN 12668-3:2013	Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 3: Combined equipment
EN ISO 6157-2:2004	Fasteners - Surface discontinuities - Part 2: Nuts (ISO 6157-2:1995)
EN ISO 8492:2013	Metallic materials - Tube - Flattening test (ISO 8492:2013)
KTA 1408.1 : 2015 COR 2016	QUALITY ASSURANCE OF WELD FILLER METALS AND WELDING CONSUMABLES FOR PRESSURE AND ACTIVITY-RETAINING SYSTEMS IN NUCLEAR POWER PLANTS - PART 1: QUALIFICATION TESTING
ISO 10893-2:2011	Non-destructive testing of steel tubes Part 2: Automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections
ISO 4136:2012	Destructive tests on welds in metallic materials Transverse tensile test
ISO 10893-4:2011	Non-destructive testing of steel tubes Part 4: Liquid penetrant inspection of seamless and welded steel tubes for the detection of surface imperfections
EN ISO 148-1:2016	Metallic materials - Charpy pendulum impact test - Part 1: Test method (ISO 148-1:2016)
ISO 7963:2006	Non-destructive testing — Ultrasonic testing —- Specification for calibration block No. 2
KTA 1408.3 : 2015	QUALITY ASSURANCE OF WELD FILLER METALS AND WELDING CONSUMABLES FOR PRESSURE AND ACTIVITY-RETAINING SYSTEMS IN NUCLEAR POWER PLANTS - PART 3: PROCESSING
EN ISO 9606-1:2017	Qualification testing of welders - Fusion welding - Part 1: Steels (ISO 9606-1:2012 including Cor 1:2012 and Cor 2:2013)
DIN EN ISO 5579:2014-04	NON-DESTRUCTIVE TESTING - RADIOGRAPHIC TESTING OF METALLIC MATERIALS USING FILM AND X- OR GAMMA RAYS - BASIC RULES (ISO 5579:2013)
ISO 8249:2000	Welding Determination of Ferrite Number (FN) in austenitic and duplex ferritic-austenitic Cr-Ni stainless steel weld metals
EN 10160:1999	Ultrasonic testing of steel flat product of thickness equal or greater than 6 mm (reflection method)
ISO 3506-2:2009	Mechanical properties of corrosion-resistant stainless steel fasteners Part 2: Nuts
ISO 13916:2017	Welding — Measurement of preheating temperature, interpass temperature and preheat maintenance temperature
ISO 10893-10:2011	Non-destructive testing of steel tubes Part 10: Automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections
DIN EN ISO 9934-2:2015-12	NON-DESTRUCTIVE TESTING - MAGNETIC PARTICLE TESTING - PART 2: DETECTION MEDIA (ISO 9934-2:2015)
DIN EN ISO 19232-3:2014-02	NON-DESTRUCTIVE TESTING - IMAGE QUALITY OF RADIOGRAPHS - PART 3: IMAGE QUALITY CLASSES (ISO 19232-3:2013)
ISO 14284:1996	Steel and iron — Sampling and preparation of samples for the determination of chemical composition
DIN EN ISO 10893-3:2011-07	NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 3: AUTOMATED FULL PERIPHERAL FLUX LEAKAGE TESTING OF SEAMLESS AND WELDED (EXCEPT SUBMERGED ARC-WELDED) FERROMAGNETIC STEEL TUBES FOR THE DETECTION OF LONGITUDINAL AND/OR TRANSVERSE IMPERFECTIONS
DIN EN 10273:2016-10	HOT ROLLED WELDABLE STEEL BARS FOR PRESSURE PURPOSES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES
DIN EN 10272:2016-10	STAINLESS STEEL BARS FOR PRESSURE PURPOSES
DIN EN ISO 14284:2003-02	Steel and iron - Sampling and preparation of samples for the determination of chemical composition (ISO 14284:1996)
VDTUEV 352/1 WERKSTOFFBLAETTER : 2017 SUPP 2017	WERKSTOFFBLAETTER - SCHWEISSGEEIGNETE FEINKORNBAUSTAEHLE MIT EINER MINDESTSRECKGRENZ VON 275 MPA BAND, BLECH, BREITFACHSTAHL, FORM- UND STABSTAHL
EN ISO 3059:2012	Non-destructive testing - Penetrant testing and magnetic particle testing - Viewing conditions (ISO 3059:2012)
DIN EN 10163-2:2005-03	Delivery requirements for surface conditions of hot-rolled steel plates, wide flats and sections - Part 2: Plate and wide flats; German version EN 10163-2:2004
EN 10216-3:2013	Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes
ISO 898-1:2013	Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread
ISO 1127:1992	Stainless steel tubes Dimensions, tolerances and conventional masses per unit length
EN ISO 3506-2:2009	Mechanical properties of corrosion-resistant stainless steel fasteners - Part 2: Nuts (ISO 3506-2:2009)