KTA 3702 : 2014(R2017)
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
EMERGENCY POWER GENERATING FACILITIES WITH DIESEL-GENERATOR UNITS IN NUCLEAR POWER PLANTS
Superseded date
12-08-2022
Published date
01-12-2013
Publisher
Fundamentals
1 Scope
2 Definitions
3 Design
4 Documents to be Submitted
5 Suitability Tests, Type Tests, and Routine Tests
6 Tests and Inspections During On-site Assembly
7 Commissioning Tests
8 In-service Inspections
9 Operation, Servicing, and Repair
10 Tests Subsequent to Servicing or Repair
11 Testers
12 Test Certification and Documentation
Appendix A - Monitoring and Protective Shutdown of an
Emergency Power Generating Facility with a
Standby Diesel Generator Unit
Appendix B - Design Example for the Equipment
Protection of a Diesel Engine
Appendix C - Design Example for the Equipment
Protection of a Generator
Appendix D - Type Testing of a Diesel Engine
Appendix E - Regulations Referred to in this Safety Standard
Pertains to stationary emergency power generating facilities with diesel-generator units (referred to in this safety standard text as 'emergency power generating facility') in stationary nuclear power plants.
| DevelopmentNote |
Supersedes KTA 3702.1 and KTA 3702.2. (03/2003)
|
| DocumentType |
Standard
|
| PublisherName |
Kerntechnischer Ausschuss
|
| Status |
Superseded
|
| SupersededBy |
| DIN EN 10216-1:2014-03 | SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: NON-ALLOY STEEL TUBES WITH SPECIFIED ROOM TEMPERATURE PROPERTIES |
| AD 2000-MERKBLATT HP5/2:2011 | MANUFACTURE AND TESTING OF JOINTS - PRODUCTION TESTING OF WELDS, TESTING OF THE PARENT METAL AFTER POST-WELD HEAT TREATMENT |
| EN 10269:2013 | Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties |
| DIN EN 10217-1:2005-04 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: NON-ALLOY STEEL TUBES WITH SPECIFIED ROOM TEMPERATURE PROPERTIES |
| DIN EN 10216-5:2014-03 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes |
| DIN EN 10207:2015-12 (Draft) | STEELS FOR SIMPLE PRESSURE VESSELS - TECHNICAL DELIVERY REQUIREMENTS FOR PLATES, STRIPS AND BARS |
| EN 10028-1:2017 | Flat products made of steels for pressure purposes - Part 1: General requirements |
| ISO 3506-1:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners Part 1: Bolts, screws and studs |
| DIN EN 10222-2:2013-01 (Draft) | STEEL FORGINGS FOR PRESSURE PURPOSES - PART 2: FERRITIC AND MARTENSITIC STEELS WITH SPECIFIED ELEVATED TEMPERATURES PROPERTIES |
| EN 10216-5:2013 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes |
| EN 10213:2007+A1:2016 | Steel castings for pressure purposes |
| AD 2000-MERKBLATT HP0:2017 | GENERAL PRINCIPLES OF DESIGN, MANUFACTURE AND ASSOCIATED TESTS |
| EN 10273:2016 | Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties |
| AD 2000 MERKBLATT HP5/3 ANL1 : 2015 | NON-DESTRUCTIVE TESTING OF WELDED JOINTS - MINIMUM REQUIREMENTS FOR NON-DESTRUCTIVE TESTING METHODS |
| DIN EN 10283:2010-06 | CORROSION RESISTANT STEEL CASTINGS |
| EN 60034-1:2010/corrigendum Oct. 2010 | ROTATING ELECTRICAL MACHINES - PART 1: RATING AND PERFORMANCE |
| EN ISO 3506-1:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners - Part 1: Bolts, screws and studs (ISO 3506-1:2009) |
| EN ISO 3506-3:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners - Part 3: Set screws and similar fasteners not under tensile stress (ISO 3506-3:2009) |
| DIN EN 60034-1 : 2011 | ROTATING ELECTRICAL MACHINES - PART 1: RATING AND PERFORMANCE |
| VDE 0530-4 : 2009 | ROTATING ELECTRICAL MACHINES - PART 4: METHODS FOR DETERMINING SYNCHRONOUS MACHINE QUANTITIES FROM TESTS |
| AD 2000-Merkblatt W 3/2:2015-11 | CAST IRON MATERIALS - SPHEROIDAL-GRAPHITE CAST IRON NON-ALLOY AND LOW ALLOY |
| EN 10088-3:2014 | Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes |
| DIN EN 10216-4:2014-03 | SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 4: NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES |
| DIN EN 10216-3:2014-03 | SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 3: ALLOY FINE GRAIN STEEL TUBES |
| EN 10312:2002/A1:2005 | WELDED STAINLESS STEEL TUBES FOR THE CONVEYANCE OF WATER AND OTHER AQUEOUS LIQUIDS - TECHNICAL DELIVERY CONDITIONS |
| EN 10025:1990/A1:1993 | HOT ROLLED PRODUCTS OF NON-ALLOY STRUCTURAL STEELS - TECHNICAL DELIVERY CONDITIONS |
| DIN EN 10028-7:2016-10 | FLAT PRODUCTS MADE OF STEELS FOR PRESSURE PURPOSES - PART 7: STAINLESS STEELS |
| DIN EN 60034-4 : 2009 | ROTATING ELECTRICAL MACHINES - PART 4: METHODS FOR DETERMINING SYNCHRONOUS MACHINE QUANTITIES FROM TESTS |
| EN 10216-2:2013 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties |
| DIN EN 10250-1:1999-12 | Open die steel forgings for general engineering purposes - Part 1: General requirements |
| DIN EN 1563:2015-07 (Draft) | FOUNDING - SPHEROIDAL GRAPHITE CAST IRONS |
| EN 10088-2:2014 | STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
| DIN EN ISO 3506-1:2010-04 | MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 1: BOLTS, SCREWS AND STUDS |
| EN 3506 : 2001 | Aerospace series - Hot rolled sheets and plates in heat resisting alloys - Thickness 2,0 mm < = a < = 100 mm - Dimensions |
| EN 10028-2:2017 | Flat products made of steels for pressure purposes - Part 2: Non-alloy and alloy steels with specified elevated temperature properties |
| DIN EN 10222-5:2013-01 (Draft) | STEEL FORGINGS FOR PRESSURE PURPOSES - PART 5: MARTENSITIC, AUSTENITIC AND AUSTENITIC-FERRITIC STAINLESS STEELS |
| DIN EN 10217-7:2015-01 | Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes |
| EN 10253-4:2008/AC:2009 | BUTT-WELDING PIPE FITTINGS - PART 4: WROUGHT AUSTENITIC AND AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITH SPECIFIC INSPECTION REQUIREMENTS |
| AD 2000-MERKBLATT W5:2009 | CAST STEEL |
| EN 10028-7:2016 | Flat products made of steels for pressure purposes - Part 7: Stainless steels |
| EN 10283:2010 | Corrosion resistant steel castings |
| EN 10217-7:2014 | Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes |
| EN 10207:2017 | Steels for simple pressure vessels - Technical delivery requirements for plates, strips and bars |
| ISO 3506-3:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners Part 3: Set screws and similar fasteners not under tensile stress |
| KTA 1401 : 2013 | GENERAL REQUIREMENTS REGARDING QUALITY ASSURANCE |
| EN 10272:2016 | Stainless steel bars for pressure purposes |
| DIN EN 10297-2:2006-02 | Seamless steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel |
| DIN EN 10253-2:2008-09 | Butt-welding pipe fittings - Part 2: Non alloy and ferritic alloy steels with specific inspection requirements |
| DIN EN 10213:2016-10 | STEEL CASTINGS FOR PRESSURE PURPOSES |
| DIN EN 10216-2:2014-03 | SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
| AD 2000-MERKBLATT W9:2017 | STEEL FLANGES |
| EN 10222-3:2017 | Steel forgings for pressure purposes - Part 3: Nickel steels with specified low temperature properties |
| DIN EN 10204:2005-01 | Metallic products - Types of inspection documents; German version EN 10204:2004 |
| EN 10222-5:2017 | Steel forgings for pressure purposes - Part 5: Martensitic, austenitic and austenitic-ferritic stainless steels |
| EN 10250-4:1999 | Open die steel forgings for general engineering purposes - Part 4: Stainless steels |
| EN 60034-4:2008 | Rotating electrical machines - Part 4: Methods for determining synchronous machine quantities from tests |
| EN 10296-2:2005/AC:2007 | WELDED CIRCULAR STEEL TUBES FOR MECHANICAL AND GENERAL ENGINEERING PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: STAINLESS STEEL |
| EN 10250-1:1999 | Open die steel forgings for general engineering purposes - Part 1: General requirements |
| EN 10297-2:2005/AC:2007 | SEAMLESS CIRCULAR STEEL TUBES FOR MECHANICAL AND GENERAL ENGINEERING PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: STAINLESS STEEL |
| DIN EN 10217-2:2005-04 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: ELECTRIC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
| ISO 8528-9:2017 | Reciprocating internal combustion engine driven alternating current generating sets — Part 9: Measurement and evaluation of mechanical vibrations |
| DIN EN ISO 3506-2:2010-04 | MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 2: NUTS |
| DIN ISO 8528-9:1999-01 | RECIPROCATING INTERNAL COMBUSTION ENGINE DRIVEN ALTERNATING CURRENT GENERATING SETS - PART 9: MEASUREMENT AND EVALUATION OF MECHANICAL VIBRATIONS |
| IEC 60034-4:2008 | Rotating electrical machines - Part 4: Methods for determining synchronous machine quantities from tests |
| EN 10217-2:2002/A1:2005 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: ELECTRIC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
| EN 10250-2:1999 | Open die steel forgings for general engineering purposes - Part 2: Non-alloy quality and special steels |
| EN 10222-4:2017 | Steel forgings for pressure purposes - Part 4: Weldable fine grain steels with high proof strength |
| EN 60034-2-1:2014 | Rotating electrical machines - Part 2-1: Standard methods for determining losses and efficiency from tests (excluding machines for traction vehicles) |
| EN 10222-2:2017 | Steel forgings for pressure purposes - Part 2: Ferritic and martensitic steels with specified elevated temperatures properties |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| EN 1563:2011 | Founding - Spheroidal graphite cast irons |
| EN 10224:2002/A1:2005 | NON-ALLOY STEEL TUBES AND FITTINGS FOR THE CONVEYANCE OF WATER AND OTHER AQUEOUS LIQUIDS - TECHNICAL DELIVERY CONDITIONS |
| VDE 0530-2-1 : 2015 | ROTATING ELECTRICAL MACHINES - PART 2-1: STANDARD METHODS FOR DETERMINING LOSSES AND EFFICIENCY FROM TESTS (EXCLUDING MACHINES FOR TRACTION VEHICLES) (IEC 60034-2-1:2014) |
| EN 10083-1:2006 | Steels for quenching and tempering - Part 1: General technical delivery conditions |
| EN 10083-2:2006 | Steels for quenching and tempering - Part 2: Technical delivery conditions for non alloy steels |
| EN 10296-1:2003 | Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 1: Non-alloy and alloy steel tubes |
| DIN EN 10222-4:2013-01 (Draft) | STEEL FORGINGS FOR PRESSURE PURPOSES - PART 4: WELDABLE FINE GRAIN STEELS WITH HIGH PROOF STRENGTH |
| DIN EN 10269:2014-02 | STEELS AND NICKEL ALLOYS FOR FASTENERS WITH SPECIFIED ELEVATED AND/OR LOW TEMPERATURE PROPERTIES |
| EN 10297-1:2003 | Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 1: Non-alloy and alloy steel tubes |
| DIN EN 60034-2-1 : 2015 | ROTATING ELECTRICAL MACHINES - PART 2-1: STANDARD METHODS FOR DETERMINING LOSSES AND EFFICIENCY FROM TESTS (EXCLUDING MACHINES FOR TRACTION VEHICLES) (IEC 60034-2-1:2014) |
| EN 10216-1:2013 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties |
| VDE 0530-1 : 2011 | Rotating electrical machines Part 1: Rating and performance (IEC 60034-1:2010, modified); |
| DIN EN 3506:2003-03 | Aerospace series - Hot rolled sheets and plates in heat resisting alloys - Thickness 2,0 mm <kleiner |
| EN 10216-4:2013 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 4: Non-alloy and alloy steel tubes with specified low temperature properties |
| AD 2000-Merkblatt HP 30:2016-05 | PERFORMANCE OF PRESSURE TESTS |
| DIN EN 10253-4:2008-06 | BUTT-WELDING PIPE FITTINGS - PART 4: WROUGHT AUSTENITIC AND AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITH SPECIFIC INSPECTION REQUIREMENTS |
| ISO 3506-2:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners Part 2: Nuts |
| AD 2000-MERKBLATT HP5/1:2008 | MANUFACTURE AND TESTING OF JOINTS - PRINCIPLES OF WELDING PRACTICE |
| EN 10083-3:2006/AC:2008 | STEELS FOR QUENCHING AND TEMPERING - PART 3: TECHNICAL DELIVERY CONDITIONS FOR ALLOY STEELS |
| DIN EN 10273:2016-10 | HOT ROLLED WELDABLE STEEL BARS FOR PRESSURE PURPOSES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
| EN 10253-2:2007 | Butt-welding pipe fittings - Part 2: Non alloy and ferritic alloy steels with specific inspection requirements |
| EN 10217-1:2002/A1:2005 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - NON-ALLOY STEEL TUBES WITH SPECIFIED ROOM TEMPERATURE PROPERTIES |
| DIN EN 10272:2016-10 | STAINLESS STEEL BARS FOR PRESSURE PURPOSES |
| EN 10216-3:2013 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes |
| DIN EN 10222-3:2013-01 (Draft) | STEEL FORGINGS FOR PRESSURE PURPOSES - PART 3: NICKEL STEELS WITH SPECIFIED LOW TEMPERATURE PROPERTIES |
| EN 10222-1:2017 | Steel forgings for pressure purposes - Part 1: General requirements for open die forgings |
| EN ISO 3506-2:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners - Part 2: Nuts (ISO 3506-2:2009) |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.