|
SAE AMS 2404 : 2013
|
PLATING, ELECTROLESS NICKEL
|
|
SAE AMS 2422 : 2014
|
PLATING, GOLD
|
|
MIL-STD-129 Revision R:2014
|
Military Marking for Shipment and Storage
|
|
MIL-DTL-55302 Revision G:2009
|
CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES
|
|
MIL-P-24691-3 Base Document:1987
|
PIPE AND TUBE, CORROSION RESISTANT, STAINLESS STEEL, SEAMLESS OR WELDED
|
|
MIL-PRF-39012 Revision F:2014
|
CONNECTORS, COAXIAL, RADIO FREQUENCY, GENERAL SPECIFICATION FOR
|
|
SAE J 452 : 2003
|
GENERAL INFORMATION - CHEMICAL COMPOSITIONS, MECHANICAL AND PHYSICAL PROPERTIES OF SAE ALUMINUM CASTING ALLOYS
|
|
MIL-DTL-45204 Revision D:2007
|
Gold Plating, Electrodeposited
|
|
ANSI/NCSL Z540 3 : 2006(R2013)
|
REQUIREMENTS FOR THE CALIBRATION OF MEASURING AND TEST EQUIPMENT
|
|
MIL-STD-1276 Revision H:2013
|
Leads for Electronic Component Parts
|
|
ASTM A 666 : 2015 : REDLINE
|
Standard Specification for Annealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, and Flat Bar
|
|
SAE AMS QQ N 290 : 2015
|
NICKEL PLATING (ELECTRODEPOSITED)
|
|
ASTM B 545 : 2013 : REDLINE
|
Standard Specification for Electrodeposited Coatings of Tin
|
|
ASTM A 693 : 2016 : REDLINE
|
Standard Specification for Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip
|
|
ASTM B 221 : 2014 : REDLINE
|
Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes
|
|
ASTM B 121/B121M : 2016 : REDLINE
|
Standard Specification for Leaded Brass Plate, Sheet, Strip, and Rolled Bar
|
|
MIL-STD-889 Revision C:2016
|
DISSIMILAR METALS
|
|
MIL-DTL-14072 Revision F:2013
|
FINISHES FOR GROUND BASED ELECTRONIC EQUIPMENT
|
|
MIL-DTL-5541 Revision F:2006
|
Chemical Conversion Coatings on Aluminum and Aluminum Alloys
|
|
SAE AMS I 23011:2012(S2017)
|
IRON-NICKEL ALLOYS FOR SEALING TO GLASSES AND CERAMIC
|
|
MIL-DTL-3922 Revision E:2016
|
FLANGES, WAVEGUIDE, GENERAL PURPOSE, GENERAL SPECIFICATION FOR
|
|
SAE AMS QQ S 763D : 2013(S2015)
|
STEEL, CORROSION RESISTANT, BARS, WIRE, SHAPES, AND FORGINGS
|
|
ASTM D 1710 : 2015 : REDLINE
|
Standard Specification for Extruded Polytetrafluoroethylene (PTFE) Rod, Heavy Walled Tubing and Basic Shapes
|
|
ASTM B 209 : 2014 : REDLINE
|
Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate
|
|
SAE AMS QQ A 250 B : 2012
|
ALUMINUM AND ALUMINUM ALLOY, PLATE AND SHEET GENERAL SPECIFICATION FOR
|
|
ASTM B 194 : 2015 : REDLINE
|
Standard Specification for Copper-Beryllium Alloy Plate, Sheet, Strip, and Rolled Bar
|
|
SAE AMS 4291 : 2017
|
ALUMINUM ALLOY, DIE CASTINGS, 8.5SI - 3.5CU (A380.0-F), AS CAST
|
|
SAE AMS 4290 : 2017
|
ALUMINUM ALLOY, DIE CASTINGS 9.5SI - 0.50MG (360.0-F), AS CAST
|
|
MIL-STD-202 Revision H:2015
|
ELECTRONIC AND ELECTRICAL COMPONENT PARTS
|
|
ASTM B 241/B241M : 2016 : REDLINE
|
Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube
|
|
SAE AMS 5511 : 2013
|
STEEL, CORROSION-RESISTANT, SHEET, STRIP, AND PLATE, 19CR - 9.5NI (304L), SOLUTION HEAT TREATED
|
|
FED-STD-H28 Revision A:1994
|
Screw-Thread Standards for Federal Services
|
|
MIL-DTL-85 Revision K:2011
|
WAVEGUIDES, RIGID, RECTANGULAR - GENERAL SPECIFICATION FOR
|
Important note : All end users must be registered with an Account prior to user licenses being assigned.