MIL-DTL-3786 Revision J:2013
Current
The latest, up-to-date edition.
1. SCOPE
2. APPLICABLE DOCUMENTS
3. REQUIREMENTS
4. VERIFICATION
5. PACKAGING
6. NOTES
APPENDIX A - PROCEDURE FOR QUALIFICATION
INSPECTION
Describes the general requirements for circuit selector, rotary switches, designed for low power, alternating current (ac) or direct current (dc) switching applications (capable of making and breaking a resistive load of 2 amperes or less, unless otherwise specified, which are primarily for use in electronic and communications equipment.
| Committee |
FSC 5930
|
| DevelopmentNote |
Supersedes MIL S 3786 (F) (01/2006)
|
| DocumentType |
Standard
|
| Pages |
93
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Current
|
| Supersedes |
| MIL-DTL-3786-10 Revision E:2004 | SWITCH, ROTARY, OPEN CONSTRUCTION, .500 AMPERE, STYLE SR10 |
| MIL-DTL-3786-32 Revision C:2004 | SWITCH, ROTARY, OPEN CONSTRUCTION, 1/5 AMPERE, STYLE SR32 |
| MIL-DTL-917 Revision F:2014 | ELECTRIC POWER EQUIPMENT, BASIC REQUIREMENTS FOR |
| MIL-DTL-3786-9 Revision E:2004 | SWITCH, ROTARY, OPEN CONSTRUCTION, 1/2 AMPERE, STYLE SR09 |
| MIL-DTL-3786-3 Revision G:2004 | SWITCH, ROTARY, OPEN CONSTRUCTION, 1/2 AMPERE, STYLE SR03 |
| MIL-DTL-3786-40 Revision B:2004 | SWITCH, ROTARY, OPEN CONSTRUCTION, 1/2 AMPERE AND LOW LEVEL, STYLE SR40 |
| MIL-DTL-3786-28 Revision E:2004 | SWITCH, ROTARY, CLOSED CONSTRUCTION, 1 AMPERE AND LOW LEVEL STYLE SR28 |
| MIL-DTL-3786-20 Revision K:2010 | SWITCH, ROTARY, CLOSED CONSTRUCTION, EXPLOSION PROOF, FLUX SEAL, .500 INCH DIAMETER, .200 AMPERE, STYLE SR20 |
| MIL-DTL-3786-1 Revision G:2011 | SWITCH, ROTARY, OPEN CONSTRUCTION, 1/2 AMPERE, STYLE SR01 |
| MIL-DTL-3786-2 Revision G:2011 | SWITCH, ROTARY, OPEN CONSTRUCTION, 1/2 AMPERE, STYLE SR02 |
| MIL HDBK 1132 : 0 | SWITCHES, SELECTION AND USE OF |
| MIL-DTL-3786-39 Revision E:2010 | SWITCH, ROTARY, CLOSED CONSTRUCTION, EXPLOSION PROOF, 400 MILLIAMPERES, STYLE SR39 |
| MIL-DTL-3786-5 Revision H:2011 | SWITCH, ROTARY, OPEN CONSTRUCTION, .200 AMPERE, STYLE SR05 |
| MIL-DTL-3786-36 Revision B:2008 | SWITCH, ROTARY, CLOSED CONSTRUCTION, 1/4 AMPERE, STYLE SR36 |
| MIL-DTL-3786-4 Revision M:2014 | SWITCH, ROTARY, CLOSED CONSTRUCTION, 2 AMPERES, LOW LEVEL, POSITIVE SHAFT GROUNDING, FLUX SEAL, STYLE SR04 |
| MIL-DTL-3786-13 Revision G:2007 | SWITCH, ROTARY, CLOSED CONSTRUCTION, .500 AMPERE, STYLE SR13 |
| MIL-STD-202-207 Base Document:2015 | METHOD 207, HIGH IMPACT SHOCK |
| MIL-STD-202-211 Base Document:2015 | METHOD 211, TERMINAL STRENGTH |
| MIL-STD-202-302 Base Document:2015 | METHOD 302, INSULATION RESISTANCE |
| SAE AMS P 5510 : 2013 | O-RING, PREFORMED, STRAIGHT THREAD TUBE FITTING BOSS, TYPE 1 HYDRAULIC (-65 TO 160 DEGREES F) |
| ASTM D 1430 : 2017 : REDLINE | Standard Classification System for Polychlorotrifluoroethylene (PCTFE) Plastics |
| MIL-STD-202-109 Base Document:2015 | METHOD 109, EXPLOSION |
| MIL-STD-810 Revision G:2008 | ENVIRONMENTAL ENGINEERING CONSIDERATIONS AND LABORATORY TESTS |
| ANSI/NCSL Z540 3 : 2006(R2013) | REQUIREMENTS FOR THE CALIBRATION OF MEASURING AND TEST EQUIPMENT |
| MIL-STD-202-305 Base Document:2015 | METHOD 305, CAPACITANCE |
| MIL-I-46058 Revision C:1972 | Insulating Compound, Electrical (for Coating Printed Circuit Assemblies) |
| ASTM D 6779 : 2017 : REDLINE | Standard Classification System for and Basis of Specification for Polyamide Molding and Extrusion Materials (PA) |
| IPC J STD 006 : C | REQUIREMENTS FOR ELECTRONIC GRADE SOLDER ALLOYS AND FLUXED AND NON-FLUXED SOLID SOLDERS FOR ELECTRONIC SOLDERING APPLICATIONS |
| MIL-STD-202-107 Base Document:2015 | METHOD 107, THERMAL SHOCK |
| IPC J STD 004 : B | REQUIREMENTS FOR SOLDERING FLUXES |
| MIL-STD-889 Revision C:2016 | DISSIMILAR METALS |
| MIL-STD-202-106 Base Document:2015 | METHOD 106, MOISTURE RESISTANCE |
| MIL-STD-202-301 Base Document:2015 | METHOD 301, DIELECTRIC WITHSTANDING VOLTAGE |
| NASM 35333 : 2003 | WASHER, LOCK, FLAT, INTERNAL TOOTH |
| ISO 10012:2003 | Measurement management systems — Requirements for measurement processes and measuring equipment |
| MIL-STD-202-310 Base Document:2015 | METHOD 310, CONTACT-CHATTER MONITORING |
| MIL-STD-202-110 Base Document:2015 | METHOD 110, SAND AND DUST |
| A-A-59142 Base Document:1998 | ROSINS: GUM, WOOD AND TALL OIL |
| MIL-STD-202-105 Base Document:2015 | METHOD 105, BAROMETRIC PRESSURE (REDUCED) |
| MIL-STD-202-208 Base Document:2015 | METHOD 208, SOLDERABILITY |
| NASM91528:2012 | KNOBS, CONTROL, PLASTIC, ROUND, CONCENTRIC, POINTER, SPINNER, SPINNER SLIP-CLUTCH, BAR, TACTILE, KNOB LOCK POINTER, SLIP-CLUTCH, AND KNOB LOCKS |
| MIL-M-24519 Revision E:1992 | MOLDING PLASTICS, POLYESTER AND POLYARYLETHER THERMOPLASTIC |
| MIL-STD-202 Revision H:2015 | ELECTRONIC AND ELECTRICAL COMPONENT PARTS |
| MIL-STD-1285 Revision D:2004 | MARKING OF ELECTRICAL AND ELECTRONIC PARTS |
| MIL-STD-202-201 Base Document:2015 | METHOD 201, VIBRATION |
| MIL-STD-202-214 Base Document:2015 | METHOD 214, RANDOM VIBRATION |
| MIL-STD-202-206 Base Document:2015 | METHOD 206, LIFE (ROTATIONAL) |
| MIL-STD-202-204 Base Document:2015 | METHOD 204, VIBRATION, HIGH FREQUENCY |
| MIL-STD-202-213 Base Document:2015 | METHOD 213, SHOCK (SPECIFIED PULSE) |
| MIL-STD-202-307 Base Document:2015 | METHOD 307, CONTACT RESISTANCE |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.