GLAND DESIGN, PACKINGS, HYDRAULIC GENERAL REQUIREMENTS FOR

Amended by

MIL-G-5514 Revision G Notice 3 - Validation:2019

Available format(s)

PDF

Published date

11-01-1993

Publisher

US Military Specs/Standards/Handbooks

Basic design criteria for gaskets, packing and gasket glands used in hydraulic equipment on systems designed to MIL-H-5440.

Committee	FSC 1650
DevelopmentNote	G NOTICE 1 - Notice of Inactivation for new design. (12/2002) G NOTICE 2 - Notice of Validation but remains Inactive for New Design. (01/2008)
DocumentType	Standard
Pages	25
ProductNote	NEW CHILD NOT 3 2019 IS NOW ADDED
PublisherName	US Military Specs/Standards/Handbooks
Status	Current

MIL-H-25475 Revision B:1971	HYDRAULIC SYSTEM, MISSILE, DESIGN, INSTALLATION TESTS AND DATE REQUIREMENTS, GENERAL REQUIREMENTS FOR
MIL-E-16400 Revision H:1987	ELECTRONIC, INTERIOR COMMUNICATIONS AND NAVIGATION EQUIPMENT, NAVAL SHIP AND SHORE, GENERAL SPECIFICATION FOR
MIL-DTL-9395-31 Revision E:2006	SWITCHES, PRESSURE, (GAGE), TYPE 2, 5 AMPERES
SAE AS 5782 : 2015	RETAINERS (BACKUP RINGS), HYDRAULIC AND PNEUMATIC, POLYTETRAFLUOROETHYLENE RESIN, SOLID, UN-CUT, FOR USE IN AS4716 GLANDS
MIL V 24630 : 0	VALVES, CHECK, IN-LINE, FOR HYDRAULIC FLUID AND LUBRICATING OIL FLUID
MIL-H-8775 Revision D:1976	HYDRAULIC SYSTEM COMPONENTS, AIRCRAFT AND MISSILES GENERAL SPECIFICATION FOR
MIL-DTL-5523 Revision E:2011	VALVE; RELIEF, HYDRAULIC PRESSURE
MIL V 5523 : D	VALVE, RELIEF, HYDRAULIC PRESSURE
SAE AMS P 25732 : 1998	PACKAGING, PREFORMED, PETROLEUM HYDRAULIC FLUID RESISTANT, LIMITED SERVICE AT 275 DEGREES F (135 DEGREES C)
MIL-H-5440 Revision H:1993	HYDRAULIC SYSTEMS, AIRCRAFT, TYPES 1 AND 11 DESIGN AND INSTALLATION REQUIREMENTS FOR
MIL-P-8564 Revision D:1970	PNEUMATIC SYSTEM COMPONENTS, AERONAUTICAL, GENERAL SPECIFICATION FOR [ASG]
SAE AS 8791 : 2014	HYDRAULIC AND PNEUMATIC RETAINERS (BACK-UP RINGS), POLYTETRAFLUOROETHYLENE (PTFE) RESIN
SAE AIR 6082 : 2016	CALCULATIONS TO DETERMINE DIMENSIONS FOR BACKUP RINGS TO AS5781, AS5782, AS5860, AS5861
SAE AS 28772 : 2015	'D' RING SEAL FOR SHOCK STRUTS MOLDED FROM AMS-P-25732 MATERIAL
MIL-T-9720 Revision F:1984	Truck, Lift, Aerial Stores, 3000 Pounds Capacity MJ-1A and MJ-1B
SAE AIR1186A:1979(S2011)	INSTALLATION AND USE OF EQUILATERAL TRIANGLE CROSS-SECTION HYDRAULIC O-RING SEAL BACKUP RINGS (DYNA-BAKS)
MIL-DTL-9395-40 Revision C:2006	SWITCHES, PRESSURE, (GAGE), TYPE 2, LOW LEVEL TO 5 AMPERE
MIL A 24533 : B	ACTUATORS, ROTARY HYDRAULIC RACK AND PINION
MIL C 19836 : B	COOLER, FLUID, INDUSTRIAL, AIR MOTOR AND GENERATOR, NAVAL SHIPBOARD
MIL-P-87175 Base Document:1982	PACKING, PREFORMED, PETROLEUM, HYDRAULIC FLUID RESISTANT, PHOSPHONITRILIC FLUOROELASTOMER
MIL-P-87210 Base Document:1984	PNEUMATIC POWER SYSTEMS, HIGH PRESSURE
MIL-DTL-9395-43 Revision C:2006	SWITCHES, PRESSURE, GAGE (TYPE 2), LOW LEVEL TO 1 AMPERE
SAE AS 5781 : 2015	RETAINERS (BACKUP RINGS), HYDRAULIC AND PNEUMATIC, POLYTETRAFLUOROETHYLENE RESIN, SINGLE TURN, SCARF-CUT, FOR USE IN AS4716 GLANDS
MIL-DTL-9395-41 Revision D:2006	SWITCHES, PRESSURE, GAUGE (TYPE 2), LOW LEVEL TO 1 AMPERE
SAE AS 4052 : 2015	GLAND DESIGN: SCRAPER, LANDING GEAR, INSTALLATION
MIL-DTL-5516 Revision D:2008	Packing, Preformed, Petroleum Hydraulic Fluid Resistant, 160 Degrees F (71 Degrees C)
SAE AS 5798 : 2013	AEROSPACE SIZE STANDARD FOR OVERSIZE O-RINGS
MIL-DTL-5508 Revision C:2007	FUSES, AIRCRAFT AUTOMATIC QUANTITY-MEASURING, HYDRAULIC
MIL-DTL-24630 Revision A:2014	VALVES, CHECK, IN-LINE, FOR HYDRAULIC FLUID AND LUBRICATING OIL FLUID, GENERAL SPECIFICATION FOR
MIL A 5503 : E	ACTUATOR, AERONAUTICAL LINEAR UTILITY, HYDRAULIC, GENERAL SPECIFICATION FOR
MIL-P-83461 Revision B:1980	PACKING, PREFORMED, PETROLEUM HYDRAULIC FLUID RESISTANT, IMPROVED PERFORMANCE AT 275 DEGREES F (135 DEGREES C)
MIL-STD-2193 Revision C:2012	Ship Hydraulic System Components
MIL F 81836 : A SUPP 1	FILTER AND DISPOSABLE ELEMENT, FLUID PRESSURE, HYDRAULIC, 3 MICRON ABSOLUTE
MIL-DTL-5521 Revision C:2007	Washer, Aircraft Hydraulic Packing Back-Up
SAE ARP 5555 : 2016	RECOMMENDATIONS FOR INSTALLATION OF SEALS IN STANDARD GLANDS
MIL-R-5049 Revision D:1989	RING, WIPER, PISTON ROD
MIL-W-5013 Revision L:1991	WHEEL AND BRAKE ASSEMBLIES - AIRCRAFT, GENERAL SPECIFICATION FOR
SAE ARP 4943 : 2008	GROUND SUPPORT EQUIPMENT HYDRAULIC SYSTEMS, DESIGN AND INSTALLATION, RECOMMENDED PRACTICES FOR
SAE AIR 4543 : 2017	AEROSPACE HYDRAULICS AND ACTUATION LESSONS LEARNED
SAE AS 4716C: 2017	GLAND DESIGN, O-RING AND OTHER SEALS
SAE ARP 1802 : 2014	SELECTION AND APPLICATION OF POLYTETRAFLUOROETHYLENE (PTFE AND TFE) BACKUP RINGS FOR HYDRAULIC AND PNEUMATIC FLUID POWER APPLICATIONS

PPP-C-1752 Revision D:1989	CUSHIONING MATERIAL, PACKAGING, POLYETHYLENE FOAM
MS28772 Revision B:1971	PACKING D, RING, SHOCK STRUT
MIL-P-87175-1 Base Document:1982	PACKING, PREFORMED, PETROLEUM HYDRAULIC FLUID RESISTANT, PHOSPHONITRILIC FLUOROELASTOMER, GRADE 70 SIZES AND TOLERANCES
MIL-STD-129 Revision R:2014	Military Marking for Shipment and Storage
MIL P 5516 : C	PACKING, PREFORMED, PETROLEUM HYDRAULIC FLUID RESISTANT, 160 DEGREES F
MIL-P-87175-2 Base Document:1982	PACKING, PREFORMED, PETROLEUM HYDRAULIC FLUID RESISTANT PHOSPHONITRILIC FLUOROELASTOMER, GRADE 80, SIZES AND TOLERANCES
MIL-R-8791-1 Base Document:1989	RETAINER, PACKING, HYDRAULIC AND PNEUMATIC, POLYTETRAFLUOROETHYLENE RESIN, (SINGLE TURN)
PPP-B-636 Revision J:1981	BOX, SHIPPING, FIBERBOARD
MIL-STD-2073-1 Revision E:2008	STANDARD PRACTICE FOR MILITARY PACKAGING
MIL-P-4861 Revision C:1991	PACKING, PREFORMED, RUBBER PACKAGING OF
MS27595 Revision E:2006	RETAINER, PACKING BACKUP, CONTINUOUS RING, POLYTETRAFLUOROETHYLENE
MIL-P-87175 Base Document:1982	PACKING, PREFORMED, PETROLEUM, HYDRAULIC FLUID RESISTANT, PHOSPHONITRILIC FLUOROELASTOMER
MS33515 Revision J:1973	FITTING END, STANDARD DIMENSIONS FOR BULKHEAD FLARELESS TUBE CONNECTIONS
ASME B46.1 : 2009	SURFACE TEXTURE (SURFACE ROUGHNESS, WAVINESS, AND LAY)
MS28774 Revision M:2009	RETAINER, PACKING BACKUP, SINGLE TURN, POLYTETRAFLUOROETHYLENE
MS28778 Revision C:1984	PACKING, PREFORMED, STRAIGHT THREAD TUBE FITTING BOSS
MS28775 Revision E:1984	PACKING, PREFORMED, HYDRAULIC, PLUS 275 DEG. F. (O RING)
MS33656 Revision J:1987	FITTING END, STANDARD DIMENSIONS FOR FLARED TUBE CONNECTION AND GASKET SEAL
MS33566 Revision B:1975	FITTING, INSTALLATION OF FLARELESS TUBE, STRAIGHT THREADED CONNECTOR
MS28782 Revision E:2006	RETAINER, PACKING, BACK-UP, TEFLON
PPP-C-795 Revision D:1994	Cushioning Material, Closed Cell Flexible, Plastic Film
MS28773 Revision A:2005	RETAINER, PACKING, BACK-UP, TETRAFLUOROETHYLENE, STRAIGHT THREAD TUBE FITTING BOSS
MIL-R-8791 Revision D:1982	RETAINER, PACKING, HYDRAULIC, AND PNEUMATIC, TETRAFLUOROETHYLENE RESIN
MIL B 131 : H	BARRIER MATERIAL, WATER VAPOR PROOF, GREASEPROOF, FLEXIBLE HEAT SEALABLE
MS28783 Revision F:2006	RING, GASKET, BACK-UP, PTFE
DOD-D-1000 Revision B:1977	DRAWINGS, ENGINEERING AND ASSOCIATED LISTS
FED-STD-101 Revision C:1980	TEST PROCEDURES FOR PACKAGING MATERIALS
MIL-P-116 Revision J:1988	PRESERVATION, METHODS OF
MIL H 5606 : G	HYDRAULIC FLUID, PETROLEUM BASE; AIRCRAFT; MISSILE AND ORDNANCE
MIL-P-83461 Revision B:1980	PACKING, PREFORMED, PETROLEUM HYDRAULIC FLUID RESISTANT, IMPROVED PERFORMANCE AT 275 DEGREES F (135 DEGREES C)
MS33514 Revision G:1990	FITTING END, STANDARD DIMENSIONS FOR FLARELESS TUBE CONNECTION AND GASKET SEAL (ASG)
MS21344 Revision A:2016	FITTING INSTALLATION OF FLARED TUBE STRAIGHT THREADED CONNECTORS DESIGN STANDARD FOR
PPP-B-640 Revision D:1966	BOX, FIBERBOARD, CORRUGATED, TRIPLE-WALL
MIL-P-83461-1 Revision B:1989	PACKING, PREFORMED, PETROLEUM HYDRAULIC FLUID RESISTANT IMPROVED PERFORMANCE OF 275 DEG. F (135 DEG. C) SIZES AND TOLERANCES