|
QQ-P-35 Revision C:1988
|
PASSIVATION TREATMENTS FOR CORROSION-RESISTANT STEEL
|
|
SAE AMS 5662 : 2016
|
NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS 52.5NI - 19CR - 3.0MO - 5.1CB (NB) - 0.90TI - 0.50AI - 18FE CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED 1775 DEGREES F (968 DEGREES C) SOLUTION HEAT TREATED, PRECIPITATION-HARDENABLE
|
|
SAE AMS 6322 : 2014
|
STEEL BARS, FORGINGS, AND RINGS, 0.50CR - 0.55NI - 0.25MO (0.38 - 0.43C) (SAE 8740)
|
|
SAE AMS 2488 : 2000
|
ANODIC TREATMENT - TITANIUM AND TITANIUM ALLOYS SOLUTION PH 13 OR HIGHER
|
|
MIL-H-6875 Revision H:1989
|
HEAT TREATMENT OF STEEL RAW MATERIALS
|
|
ASME B46.1 : 2009
|
SURFACE TEXTURE (SURFACE ROUGHNESS, WAVINESS, AND LAY)
|
|
QQ A 225/6 : E
|
ALUMINUM ALLOY BAR, ROD, AND WIRE, ROLLED, DRAWN OR COLD FINISHED, 2024
|
|
MIL-STD-6866 Base Document:1985
|
INSPECTION, LIQUID PENETRANT
|
|
MIL-STD-453 Revision C:1984
|
INSPECTION, RADIOGRAPHIC
|
|
SAE AMS 5734 : 2012
|
STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, AND TUBING, 15CR - 25.5NI - 1.2MO - 2.1TI - 0.006B - 0.30V, CONSUMABLE ELECTRODE MELTED, 1650 DEGREES F (899 DEGREES C) SOLUTION HEAT TREATED
|
|
QQ A 250/6 : G
|
ALUMINUM ALLOY 5083, PLATE AND SHEET
|
|
FED-STD-H28-2 Revision B:1991
|
Screw-Thread Standards for Federal Services Section 2 Unified Inch Screw Threads- UN and UNR Thread Forms
|
|
SAE AMS 2401 : 2013
|
PLATING, CADMIUM, LOW HYDROGEN CONTENT DEPOSIT
|
|
MIL-S-8879 Revision C:1991
|
SCREW THREADS, CONTROLLED RADIUS ROOT WITH INCREASED MINOR DIAMETER, GENERAL SPECIFICATION FOR
|
|
SAE AMS 5731 : 2012
|
STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 15CR - 25.5NI - 1.2MO - 2.1TI - 0.006B - 0.30V, CONSUMABLE ELECTRODE MELTED, 1800 DEGREES F (982 DEGREES C) SOLUTION HEAT TREATED
|
|
MIL A 8625 : F
|
ANODIC COATINGS FOR ALUMINUM AND ALUMINUM ALLOYS
|
|
MIL-S-6758 Revision B:1993
|
STEEL, CHROME-MOLYBDENUM (4130) BARS AND REFORGING STOCK (AIRCRAFT QUALITY)
|
|
ASTM E 8 : 2004
|
Standard Test Methods for Tension Testing of Metallic Materials
|
|
QQ-P-416 Revision F:1991
|
PLATING, CADMIUM (ELECTRODEPOSITED)
|
|
FED-STD-H28-20 Revision B:1994
|
SCREW THREAD STANDARDS FOR FEDERAL SERVICES, SECTION 20, INSPECTION METHODS FOR ACCEPTABILITY OF UN, UNR, UNJ, M, AND MJ SCREW THREADS
|
|
SAE AMS 4967 : 2014
|
TITANIUM ALLOY, BARS, WIRE, FORGINGS, AND RINGS 6.0AL - 4.0V ANNEALED, HEAT TREATABLE
|
|
MIL-STD-105 Revision E:1989
|
SAMPLING PROCEDURES AND TABLES FOR INSPECTION BY ATTRIBUTES
|
|
MIL-S-6049 Revision A:1967
|
STEEL, CHROME NICKEL MOLYBDENUM [8740] BARS, RODS AND FORGING STOCK FOR AIRCRAFT APPLICATION
|
|
MIL-S-7742 Revision D:1991
|
SCREW THREADS, STANDARD, OPTIMUM SELECTED SERIES, GENERAL SPECIFICATION FOR
|
Important note : All end users must be registered with an Account prior to user licenses being assigned.