MIL-STD-130 Revision N:2007
Current
Current
The latest, up-to-date edition.
IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY
Available format(s)
PDF
Language(s)
English
Publisher
1. SCOPE
2. APPLICABLE DOCUMENTS
3. DEFINITIONS
4. GENERAL REQUIREMENTS
5. DETAILED REQUIREMENTS
6. NOTES
APPENDIX A - STRUCTURING DATA ELEMENTS FOR ITEM
UNIQUE IDENTIFICATION (IUID)
CONCLUDING MATERIAL
Specifies the item marking criteria for development of specific marking requirements and methods for identification of items of military property produced, stocked, stored, and issued by or for the Department of Defense (DoD).
| Committee |
AREA SESS
|
| DocumentType |
Standard
|
| Pages |
52
|
| ProductNote |
NEW CHILD NOT 1 2019 IS NOW ADDED
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Current
|
| MIL-A-85802 Base Document:1986 | ACTUATOR, ELECTROMECHANICAL, LINEAR |
| MIL-A-83783 Base Document:1972 | Adapter, Test, MX-9042/G |
| MIL S 81963 : B | SERVO-COMPONENT, PRECISION INSTRUMENT, ROTATING, COMMON REQUIREMENTS AND TESTS, GENERAL SPECIFICATION FOR |
| MIL-A-43820 Revision B:1981 | AIR LOCK, (MUST) |
| MIL-C-6781 Revision B:1960 | CONTROL PANEL, AIRCRAFT EQUIPMENT, RACK OR CONSOLE MOUNTED |
| MIL-R-52915 Revision B:1994 | RECHARGE/RECOVERY UNIT, FIRE EXTINGUISHER, MONOBROMOTRIFLUOROMETHANE (CF3BR) PNEUMATIC POWERED |
| MIL-DTL-3933 Revision L:2014 | Attenuators, Fixed, Space Level, Non-Space Level General Specification for |
| MIL-W-17316 Revision A:1980 | WIND MEASURING SET AN/PMQ-30 (COMPONENTS OF) |
| MIL F 0024385 : E | FIRE EXTINGUISHING AGENT, AQUEOUS FILM-FORMING FOAM (AFFF) LIQUID CONCENTRATE, FOR FRESH AND SEA WATER |
| SAE AS 85188 : 2013 | RIVETER, POWER, PNEUMATIC-HYDRAULIC BLIND RIVET INSTALLATION |
| MIL-S-52256 Revision C:1990 | SURVEYING INSTRUMENT; AZIMUTH GYRO, LIGHTWEIGHT |
| MIL-DTL-15514 Revision G:2016 | TELEPHONE EQUIPMENT, SOUND POWERED TELEPHONE HANDSET, HEADSET - CHEST SET, AND HEADSET - CHEST SET, NOISE ATTENUATING |
| DSCC 11001 : 0 | PRINTED WIRING BOARD, FLEXIBLE, TYPE 1 (SINGLE-SIDED ) WITH UNSUPPORTED HOLES, WITH OR WITHOUT STIFFENER |
| MIL-R-71126 Base Document:1992 | RIFLE, 7.62 MILLIMETER, SNIPER W/DAY OPTICAL SIGHT AND CARRYING CASES - M24 |
| SAE ARP 907 : 2013 | MISSILE & ROCKET APPLICATIONS - HOSE ASSEMBLIES, FLEXIBLE METAL, HIGH PRESSURE AND HIGH TEMPERATURE |
| MIL-V-22272 Revision D:1982 | VISORS, NEODYMIUM LASER, PROTECTIVE FOR AIRCREWMAN'S HELMET |
| MIL C 83166 : LATEST | CONVERTER MULTIPLEXER, SIGNAL DATA, GENERAL SPECIFICATION FOR |
| MIL C 38240 : C | COMPUTER, ALTITUDE, ALTITUDE ENCODING CPU 66, GENERAL SPECIFICATION FOR AND MTU 39/A MOUNTING TRAY |
| MIL-I-8580 Revision B:1965 | INDICATOR, TACHOMETER, HELICOPTER, 0-4000 RPM TYPE MA 1 |
| MIL-A-26442 Base Document:1959 | ADAPTERS, WAVEGUIDE TO COAXIAL |
| MIL-I-62523 Base Document:1987 | INSULATION, PANEL, VIBRATION-DAMPENING AND THERMAL-BARRIER |
| MIL-DTL-25959 Revision H:2012 | TIE DOWN, TENSIONERS, CARGO, AIRCRAFT |
| MIL E 5589 : D | EARPHONE, (EXTENDED RANGE), H-301/U |
| MIL-A-52679 Revision B:1983 | ANCHOR, SURFACING MEMBRANE: 12 INCH |
| MIL-M-8609 Revision B:1965 | MOTOR, DC 28 VOLT SYSTEM AIRCRAFT, GENERAL SPECIFICATION FOR |
| ASTM F 2590 : 2006 : EDT 1 | Standard Specification for Bearing, Roller, Thrust, Two Channeled Race Surface, Rigid or Flat Seat Type |
| DOD-S-87956 Base Document:1979 | SHELTER, S-80A AND S-82A |
| MIL-C-62500 Base Document:1985 | CARRIER, ELECTRONIC WARFARE SYSTEM, FULL-TRACKED: M1015A1 |
| MIL S 10215 : H | SPEEDOMETER, TACHOMETERS, FLEXIBLE SHAFT ASSEMBLIES,FLEXIBLE SHAFT ASSEMBLY CORES, ADAPTERS AND TRANSMITTERS |
| MIL-C-52972 Revision A:1987 | COMPRESSOR UNIT, 5 CFM, 3200 PSI, DIESEL ENGINE DRIVEN, DIVING AIR |
| MIL T 0022238 : J | TANK, LIQUID STORAGE, METAL, FOR PETROLEUM PRODUCTS |
| MIL-I-62676 Base Document:1992 | INDICATORS AND TRANSMITTERS: LIQUID, TEMPERATURE AND PRESSURE (METRIC) |
| MIL-R-38370 Revision B:1972 | RECORDING SET, FLIGHT DATA A/A24U-10 |
| MIL-T-38034 Revision E:1970 | TIMER, FIRE CONTROL, BOMBING, DUAL |
| MIL-A-38307 Revision A:1981 | ACCELEROMETER, AIRCRAFT, MX-6663/AJB-7 |
| MIL-P-52281 Revision B:1978 | PROCESSING MACHINE, PHOTOGRAMMETRIC DIAPOSITIVE PLATES |
| MIL-W-21157 Revision A:1971 | WELDMENT, STEEL, CARBON AND LOW ALLOY (YIELD STRENGTH 3O,OOO - 6O,OOO PS1) |
| MIL-B-12745 Revision A:1973 | BRIDGE ERECTION SET, FIXED BRIDGE, BASIC SET, FOR BRIDGES, STEEL, RAILWAY |
| MIL-C-1173 Revision E:1976 | CART, GENERAL HAULING |
| MIL-STD-2156 Base Document:1983 | LAUNCHER, RAIL, GUIDED MISSILE, AIRCRAFT, GENERAL DESIGN CRITERIA FOR |
| MIL-B-14154 Revision E:1992 | BORING MACHINE, CAM AND MAIN BEARINGS, PORTABLE |
| SAE AS 8662 : 1999 | KNIFE, HUNTING, SHEATHED, SURVIVAL, PILOTS |
| MIL-A-26336 Base Document:1958 | Antenna AT-840-ARC |
| MIL-A-46146 Revision B:1990 | ADHESIVE-SEALANTS, SILICONE, RTV, NONCORROSIVE (FOR USE WITH SENSITIVE METALS AND EQUIPMENT) |
| MIL-C-87979 Base Document:1987 | CLOCK, AIRCRAFT, ELECTRONIC |
| MIL-B-12582 Revision C:1984 | BLOCK, TACKLE, HAUL BACK, FOR WIRE ROPE |
| GG-G-91 Revision D:1972 | GAGE, TIRE PRESSURE, SELF CONTAINED AND INFLATOR GAGE, PNEUMATIC TIRE |
| MIL-I-22598 Revision B:1989 | INTERPRETATION KIT, PHOTOGRAPHIC, POCKET SIZE BS-5 |
| MIL I 9900 : A | INTERPRETATION KIT. PHOTOGRAPHIC BS-2()n |
| MIL-B-20179 Revision E:1992 | BAG, BAILEY BRIDGE PARTS AND TOOLS: CLOTH, COTTON DUCK |
| MIL-J-26149 Revision E:1988 | Jack, Hydraulic, Aircraft Maintenance, General Specification for |
| MIL-DTL-83425 Revision A:2006 | EARCUP, SOUND PROTECTIVE MX-8376/AR |
| MIL-A-55674 Revision A:1969 | ANTENNA GROUP AN/TRA-37() |
| MIL T 83174 : B (3) | TRANSMITTER, ACCELEROMETER, AXIAL |
| MIL-B-8914 Revision B:1966 | BEARING, ROLLER, SELF-ALIGNING, AIRFRAME, ANTIFRICTION |
| MIL G 45006 : F NOTICE 1 | GRINDING MACHINE, CRANKSHAFT |
| MIL C 00555 : K | COMPRESSORS, AIR, RECIPROCATING AND ROTARY, DIESEL ENGINE DRIVEN |
| MIL T 5578 : C | TANK, FUEL, AIRCRAFT, SELF-SEALING |
| MIL-DTL-81581 Revision B:2006 | HOSE ASSEMBLIES, BREATHING OXYGEN AND AIR, GENERAL SPECIFICATION FOR |
| NASA STD 0005 : 2008 | NASA CONFIGURATION MANAGEMENT (CM) STANDARD |
| MIL-P-44115 Revision B:1992 | PLATFORM, ASSEMBLY, CARGO, AERIAL DELIVERY, TYPE V |
| MIL-A-46106 Revision B:1989 | ADHESIVE-SEALANTS, SILICONE, RTV, ONE-COMPONENT |
| MIL S 24317 : 0 | SWITCH, MULTI-STATION, PUSHBUTTON (ILLUMINATED AND NON-ILLUMINATED), GENERAL SPECIFICATION FOR |
| MIL I 52295 : B | INTERPRETATION KIT, PHOTOGRAPHIC, ARMY TYPE |
| DOD-STD-35-24 Revision A:1978 | AUTOMATED ENGINEERING DOCUMENT PREPARATION SYSTEM, BEARINGS |
| MIL-DTL-32480 Base Document:2014 | Adapter, Hydraulic and Pneumatic, Flareless Tube Fitting to ORFS Connectors, 1500 to 3000 PSI and Minus 65 Degrees Fahrenheit to Plus 250 Degrees Fahrenheit, General Specification for |
| MIL-S-24067 Base Document:1964 | SWITCHES, COAXIAL, RADIO FREQUENCY TRANSMISSION LINE (FOR USE WITH ELECTRONIC COUNTERMEASURES EQUIPMENT), GENERAL SPECIFICATION |
| MIL-DTL-8783 Revision D:2009 | Clamp, Hose, Flat Band 500 Degrees F, General Specification for |
| MIL-T-14132 Revision G:1991 | THEODOLITE, SURVEYING, DIRECTION, SECOND ORDER |
| MIL-DTL-27422 Revision F:2014 | TANK, FUEL, CRASH-RESISTANT, BALLISTIC-TOLERANT, AIRCRAFT |
| MIL T 14398 : J | TANK, FABRIC, COLLAPSIBLE, WATER, NYLON, RUBBER-COATED |
| MIL-A-26846 Revision B:1984 | AIR CONDITIONER, A/M32C-4, TRAILER MOUNTED, VAPOR CYCLE, ELECTRIC, MOTOR DRIVEN |
| GGG-V-790 Revision E:1992 | VULCANIZERS, HOT PATCH AND PLATE; INNER TUBE |
| ASTM F 2246 : 2006 : R2013 | Standard Specification for Bearing, Roller, Needle: Thick Outer Ring With Rollers and Cage |
| DOD-STD-35-48 Revision A:1987 | AUTOMATED ENGINEERING DOCUMENT PREPARATION SYSTEM TRANSDUCERS |
| MIL-DTL-4510 Revision F:2009 | SPOTLIGHTS, INCANDESCENT, ROOF-MOUNTED, AUTOMOTIVE |
| MIL-I-7062 Revision C:1975 | INDICATOR, POSITION, CONTROL SURFACES, 28 VOLT DC, GENERAL SPECIFICATION FOR |
| SAE AS 1145 : 2016 | AIRCRAFT BRAKE TEMPERATURE MONITOR SYSTEMS (BTMS) |
| SAE AS 4751 : 2005 | COUPLING ASSEMBLY, V-BAND SHEET METAL WIDE FLANGE, PNEUMATIC TUBE |
| MIL-I-27191 Revision C:1995 | INDICATOR, POSITION, VARIABLE NOZZLE |
| MIL C 25427 : A | COUPLING ASSEMBLY, HYDRAULIC, SELF-SEALING, QUICK DISCONNECT |
| MIL-E-23001 Revision B:1976 | ELECTRIC GENERATING SYSTEM, VARIABLE SPEED CONSTANT FREQUENCY, AIRCRAFT, GENERAL SPECIFICATION FOR |
| MIL-W-13855 Revision D:1973 | WEAPONS, SMALL ARMS AND AIRCRAFT ARMAMENT SUBSYSTEMS, GENERAL SPECIFICATION FOR |
| MIL-DTL-85670 Revision D:2012 | ANTENNA, BROADBAND AS-3191/A, AS-3792/A, AND AS-3793/A |
| MIL-L-53106 Base Document:1990 | LAUNCHER, BRIDGE, LIGHT ASSAULT TOWED |
| MIL-PRF-32080 Revision G:2014 | TRUCK, AIRCRAFT FUELING-DEFUELING, 6,000 GALLON, A/S32R-11 |
| MIL-DTL-13623 Revision E:2010 | SWITCH, ROTARY: 28 VOLT DC |
| MIL-V-29592 Base Document:1993 | VALVE, AIR VENT, AUTOMATIC, HYDRAULIC, LOW PRESSURE TYPE II SYSTEMS, GENERAL SPECIFICATION FOR |
| SAE AS 8952 : 2005 | BEARINGS, ROLLER, ROD END, ANTIFRICTION SELF-ALIGNING |
| MIL V 81940 : B | VALVE, SAMPLING AND BLEED, HYDRAULIC, TYPE LI SYSTEMS |
| MIL-P-55213 Base Document:1963 | POWER SUPPLY PP-1588 ( ) MPQ-4A |
| MIL-T-52115 Revision B:1980 | THEODOLITE, SURVEYING, DIRECTIONAL ASTRONOMICAL 0.1 SECOND WITH ACCESSORIES. TRIPOD AND CASES. |
| JSGS-87231 Revision A:1995 | ENGINES, AIRCRAFT, TURBINE |
| MIL-T-52035 Revision C:1991 | THEODOLITES, SURVEYING, DIRECTION, FIRST-ORDER, WITH ACCESSORIES, TRIPOD AND CASES |
| MIL-R-52939 Base Document:1977 | REGULATOR, CURRENT, RUNWAY LIGHTING, 120 VOLT, 2 1/4 KW, AC |
| MIL T 6396 : E | TANKS, AIRCRAFT PROPULSION FLUID SYSTEM, INTERNAL REMOVABLE, NON-SELF-SEALING |
| MIL-B-734 Revision E:1984 | BREAKER, PAVING, GASOLINE POWERED, SELF CONTAINED |
| MIL V 52837 : A NOTICE 1 | VIEWER, X-RAY FILM INDUSTRIAL, WALL MOUNTED |
| MIL F 8815 : D | FILTER AND FILTER ELEMENTS, FLUID PRESSURE, HYDRAULIC LINE, 15 MICRON ABSOLUTE AND 5 MICRON ABSOLUTE, TYPE 11 SYSTEMS; GENERAL SPECIFICATION FOR |
| MIL C 31031 : 0 | CONNECTORS, ELECTRICAL, PLUGS AND RECEPTACLES, COAXIAL, RADIO FREQUENCY, HIGH RELIABILITY, FOR FLEXIBLE AND SEMIRIGID CABLES GENERAL SPECIFICATION FOR |
| MIL-S-48567 Base Document:1977 | SLEEVE AND GRAIN ASSEMBLY |
| MIL-DTL-3661 Revision D:2013 | Lampholders, Indicator Lights, Indicator Light Housings, and Indicator Light Lenses, General Specification for |
| MIL-PRF-32316 Base Document:2008 | RIFLE, 7.62 MM: SEMI-AUTOMATIC SNIPER SYSTEM (SASS) - M110 |
| MIL F 27272 : B | FITTING, TETRAFLUOROETHYLENE HOSE, HIGH TEMPERATURE, MEDIUM PRESSURE, GENERAL REQUIREMENTS FOR |
| MIL-R-46837 Revision B:1990 | RACEWAY, STEEL, RIGID |
| MIL-I-0081969-30 Revision B:1990 | INSTALLING AND REMOVAL TOOLS, CONNECTOR ELECTRICAL CONTACT, TYPE II CLASS 2 COMPOSITION C, FOR UNWIRED CONTACTS |
| MIL-C-38392 Revision A:1969 | COMPRESSOR, HERMETIC, AIR CONDITIONING, GENERAL SPECIFICATION FOR |
| MIL T 27252 : A | TEST SET, SYNCHRO, TTU-73/E DC SELSYN, AIRCRAFT INSTRUMENTS |
| MIL A 5815 : E | ANTENNA, AIRBORNE, UHF - BAND GENERAL SPECIFICATION FOR |
| MIL-M-8555 Revision C:1984 | MISSILE, GUIDED, DESIGN AND CONSTRUCTION, GENERAL SPECIFICATION |
| GGG-P-323 Revision C:1962 | PICK, ICE |
| MIL-B-18013 Revision B:1994 | BATTERY, STORAGE, SUPPORT EQUIPMENT, GENERAL SPECIFICATION FOR |
| MIL-I-17244 Revision E:1971 | INDICATOR, TEMPERATURE, DIRECT-READING, BIMETALLIC, (3 AND 5 INCH DIAL) |
| MIL F 52618/9 : A | FITTINGS, PIPE, ALUMINUM ALLOY (THREADED) 150 POUND: GENERAL SPECIFICATION FOR |
| MIL-P-49139 Base Document:1978 | POWER SUPPLY PP6L48 ((/U |
| MIL-T-53048 Revision C:1991 | TANK, FABRIC, COLLAPSIBLE; AIR COLUMN SUPPORTED, OPEN TOP, WATER STORAGE 3000 GALLONS |
| MIL-C-52009 Revision D:2012 | CONTROL-PANEL ASSEMBLY FOR PORTABLE HELIPORT ELECTRIC LIGHTING |
| MIL-T-83460 Base Document:1975 | TRANSDUCER, MOTIONAL PICKUP TRU-164/A |
| MIL I 7627 : F | INDICATOR, TURN AND SLIP 28V DC |
| MIL H 26385 : E | HOSE, OXYGEN AND PRESSURIZATION, OZONE RESISTANT |
| MIL-R-81202 Revision D:1981 | RECEIVER ASSEMBLY, NITROGEN, FOR LAU-7 SERIES LAUNCHERS |
| MIL-I-83152 Revision B:1974 | INDICATOR, INDICATED-AIRSPEED AVU-22/A (INDICATOR-TRANSDUCER) |
| MIL-V-28712 Base Document:1969 | VOLTMETER, MILITARIZED, SOLID STATE, DC DIFFERENTIAL, GENERAL SPECIFICATION FOR |
| MIL-T-21014 Revision D:1986 | TUNGSTEN BASE METAL, HIGH DENSITY |
| MIL-I-7721 Revision D:1992 | INDICATOR, VERTICAL SPEED, 3-INCH |
| MIL-PRF-71185 Revision A:2013 | Dynamic Reference Unit-Hybrid-Replacement (DRU-H-R) |
| MIL-DTL-613 Revision D:2014 | Grapnels, Marine, Trip Wire, and Crash Truck |
| MIL F 24385 : F | FIRE EXTINGUISHING AGENT, AQUEOUS FILM FORMING FOAM, (AFFF) LIQUID CONCENTRATE, FOR FRESH AND SEA WATER |
| MIL-I-38121 Revision C:1989 | INDICATOR, PRESSURE, EGU-9/A |
| MIL-A-85055 Base Document:1979 | AVIONICS SYSTEM PERFORMANCE SPECIFICATION FOR A-4M/AV-8 BOMBING SET, ANGLE RATE AN/ASB-19(V) |
| MIL-DTL-20625 Revision B:2013 | Universal Joints, Block Type, Mechanical Remote Control System |
| MIL-T-26561 Revision C:1984 | TESTER, TYPE MA-2 RECEPTION COUPLING BREAK-AWAY FORCE, PORTABLE |
| MIL-S-25948 Revision J:1984 | SUNGLASSES, HGU-4/P (WITH CASE) |
| MIL-V-47308 Revision A:1991 | VALVE, SERVO, HYDRAULIC FLOW CONTROL |
| MIL-C-12889 Revision A:1957 | CAPACITORS, BY-PASS, RADIO-INTERFERENCE REDUCTION, PAPER DIELECTRIC, AC AND DC, (HERMETICALLY SEALED IN METALLIC CASES) GENERAL SPECIFICATION FOR |
| MIL-R-8236 Revision F:1995 | REEL, SHOULDER HARNESS, INERTIA LOCK |
| AA-F-360 Base Document:1956 | FILING CABINETS, STEEL, MAP AND PLAN (SECTIONAL) |
| MIL-DTL-3922 Revision E:2016 | FLANGES, WAVEGUIDE, GENERAL PURPOSE, GENERAL SPECIFICATION FOR |
| MIL I 27197 : C | INDICATOR, AIRSPEED, MACH NUMBER AND MAXIMUM ALLOWABLE SPEED |
| MIL I 25688 : A | INDICATOR, ELECTRICAL TACHOMETER ERU-3/A. CRANKSHAFT SPEED 500-4,000 RPM, 3 1/4 INCH SIZE |
| MIL S 5765 : F | STRAND, WIRE ROPE, ARMORED STEEL |
| MIL-O-23678 Revision B:1982 | Oxygen Systems, Portable, High Pressure, Aircraft |
| GGG-J-1564 Revision C:1992 | JACKS, DOLLY TYPE, HYDRAULIC, AUTOMOTIVE |
| MIL C 17 : G | CABLES, RADIO FREQUENCY, FLEXIBLE AND SEMIRIGID, GENERAL SPECIFICATION FOR |
| MIL-A-28716 Base Document:1969 | AMPLIFIER, AUDIO FREQUENCY, AM-3729()/SR |
| MIL H 26626 : D | HOSE ASSEMBLY, TETRAFLUOROETHYLENE, OXYGEN |
| MIL-A-5885 Revision D:1987 | ACCELEROMETER, AIRCRAFT |
| MIL-A-47318 Revision A:1990 | ADHESIVE, COPOLYMER POLYURETHANE |
| MIL-H-48671 Base Document:1988 | HOLSTER, HIP M12 |
| MIL M 5794 : B | MICROPHONE, UNIT M 6A/UR AND MICROPHONE CARBON M 51/UR |
| MIL-B-17748 Revision C:1961 | BOILERS, HEATING, LOW PRESSURE, HOT WATER NAVAL SHIPBOARD |
| MIL D 83320 : 0 | DETECTOR, MAGNETIC AZIMUTH DSU-14/A |
| MIL C 38214 : B | COMPASS, MAGNETIC,MOUNTED |
| MIL-S-38399 Revision A:1975 | STARTER, PNEUMATIC, AIRCRAFT ENGINE GENERAL SPECIFICATION FOR |
| MIL-C-52980 Revision B:1988 | COMPRESSOR, RECIPROCATING AND ROTARY, GASOLINE ENGINE DRIVEN, AIR |
| MIL-T-10163 Revision E:1992 | TERRAIN MODELING KIT, TRAINING AID |
| MIL-P-9388 Revision B:1986 | PUMP, PRESSURE, OIL FREE AIR TYPE MA-2 |
| MIL-T-5483 Revision D:1964 | TRANSMITTER, PRESSURE, SYNCHRO AIRCRAFT 165 DEGREE MOVEMENT |
| MIL-DTL-23599 Revision C:2017 | Hook, Rescue |
| MIL-DTL-32529 Base Document:2015 | POWER ELECTRONIC CONVERSION EQUIPMENT, NAVAL SHIPBOARD |
| MIL-I-85071 Revision A:1992 | INVERTERS, AIRCRAFT, DC TO AC, GENERAL SPECIFICATION FOR |
| MIL-F-8839 Revision A:1988 | FITTING, LUBRICATION, DRIVE TYPE |
| MIL-A-52940 Revision C:1987 | AEROSOL GENERATOR, NON-THERMAL, INSECTICIDE, ULTRA LOW VOLUME |
| MIL-DTL-27188 Revision C:2006 | INDICATOR, PRESSURE EGU-2/A, OIL, 0-100 PSI |
| MIL-PRF-32272 Revision A:2016 | INTEGRATED POWER MANAGEMENT CENTER (IPMC) |
| MIL-DTL-43036 Revision C:2017 | TAPE, PRESSURE-SENSITIVE ADHESIVE, PLASTIC FILM, (FOR SEALING FIBER CONTAINER AND CANS) |
| MIL-C-27298 Revision B:1980 | CLOCK, AIRCRAFT, MECHANICAL ABU AND 9-A |
| MIL-B-81502 Revision B:1980 | BATTERY, SILVER ZINC ALKALI, GEN |
| MIL F 83861 : B | FILTER ELEMENTS, NONCLEANABLE, FLUID PRESSURE, HYDRAULIC LINE, 5 AND 15 MICRON ABSOLUTE, TYPE 1I, SYSTEMS GENERAL SPECIFICATION FOR |
| MIL-T-38473 Revision A:1972 | TIMER, PRECISION, BOMBING, 0 - 30 MINUTES |
| MIL-C-555 Revision L:1991 | COMPRESSOR, AIR RECIPROCATING AND ROTARY, DIESEL ENGINE DRIVEN |
| MIL R 39002 : 0 | RESISTOR, VARIABLE, WIREWOUND, SEMI PRECISION, GENERAL SPECIFICATION FOR |
| MIL-B-53081 Base Document:1988 | BERM LINER ASSEMBLIES |
| MIL PRF 25959 : D | TIE DOWNS, CARGO, AIRCRAFT |
| MIL-DTL-6669 Revision D:2011 | INDICATOR, TEMPERATURE, ELECTRICAL RESISTANCE, MULTI-FUNCTION, -70 DEGREES C TO +150 DEGREES C |
| MIL-S-27447 Revision A:1976 | SURVIVAL KIT, PARACHUTE PACK SRU-16/P |
| MIL-C-8605 Revision B:1990 | CAP, PRESSURE FUEL SERVICING |
| MIL-P-85833 Base Document:1989 | PROTECTIVE ASSEMBLY, HELICOPTER AIRCREWMAN, CHEMICAL, BIOLOGICAL, RADIOLOGICAL |
| MIL-DTL-20277-1 Base Document:2007 | Knife, Combat |
| MIL T 28778 : 0 | TRANSFORMER, POWER, STEP UP 3-PHASE, GENERAL SPECIFICATION FOR |
| MIL-DTL-6458 Revision H:2014 | CHAIN ASSEMBLIES, SINGLE LEG, AIRCRAFT CARGO TIE DOWN |
| MIL-A-38140 Revision B:1977 | ALTIMETER, PRESSURE AAU-16/A |
| MIL-B-14075 Revision B:1975 | BAG, COOPER'S TOOLS |
| MIL C 27536 : B | COUPLING, CLAMP, GROOVED, V-BAND |
| MIL-R-52255 Revision D:1988 | REPAIR KIT AND REPAIR KIT COMPONENTS, FOR COLLAPSIBLE FABRIC TANKS, DRUMS, AND BOATS |
| MIL-G-25597 Revision D:1973 | GYROSCOPE, DISPLACEMENT, ROLL AND PITCH, TYPE MD-1 |
| GEIA HB 649 : 2005 | CONFIGURATION MANAGEMENT STANDARD IMPLEMENTATION GUIDE |
| MIL P 17869 : A | PUMPS AND MOTORS, POWER, OIL HYDRAULIC (NAVAL SHIPBOARD USE) |
| MIL-B-28873 Base Document:1983 | BLOWERS, ELECTRONICALLY COMMUTATED BRUSHLESS, DIRECT CURRENT, (ECDC) MOTOR DRIVEN, FOR COOLING ELECTRONIC EQUIPMENT, GENERAL SPECIFICATION FOR |
| MIL C 3607 : A | CONNECTOR, COAXIAL, RADIO FREQUENCY, SERIES PULSE GENERAL SPECIFICATION FOR |
| MIL-I-82787 Base Document:1990 | IGNITER ASSEMBLY, ROCKET MOTOR MK 104 |
| MIL-L-50794 Base Document:1973 | LINEAR SHAPED CHARGE ASSEMBLY |
| MIL-DTL-8878 Revision L:2014 | TURNBUCKLES, POSITIVE SAFETYING, GENERAL SPECIFICATION FOR |
| MIL V 13612 : E | VALVE, RELIEF, PRESSURE AND TEMPERATURE (FOR HOT WATER SUPPLY SYSTEMS) |
| MIL-DTL-19803 Revision G:2007 | CONVERTER, LIQUID OXYGEN, 10-LITER, GCU-24A/A |
| DSCC 11004 : 0 | PRINTED WIRING BOARD, RIGID FLEX, TYPE 4 (MULTILAYERED) WITH SUPPORTED HOLES, WITH STIFFENER |
| MIL-I-6726 Revision B:1966 | Inclinometer, Aircraft |
| MIL B 0043998 : C | BATH UNIT, AUTOMATED, MULTI-HEAD |
| MIL-B-8568 Revision B:1967 | BINOCULAR, PRISMATIC, HAND-HELD [FOR AERONAUTICAL USE] 7 X 50 AND 6 X 42 WIDE FIELD [ASG] |
| MIL S 25879 : C | SWITCH, RADIO FREQUENCY TRANSMISSION LINE SA-521A/A |
| MIL-L-80005 Revision A:1970 | LAPPING MACHINE, METALWORKING, HIGH PRECISION, FLAT SURFACES, SINGLE FACE, FREE ABRASIVE TYPE |
| MIL-DTL-62421 Revision A:2009 | CONTROL, UNIT, ELECTRONIC, DIGITAL |
| MIL-C-10320 Revision E:1982 | COVER, LEVEL ROD, PHILADELPHIA: CANVAS |
| MIL-T-52823 Revision A:1983 | TARGET SET, SURVEYING |
| MIL-T-27305 Revision C:1987 | TRANSFORMER AND INDUCTORS [AUDIO, POWER AND HIGH POWER PULSE] INDUCTOR, POWER TF5S04ZZ |
| MIL-D-70789 Revision A:1992 | DYNAMIC REFERENCE UNIT (DRU) |
| MIL-T-13558 Revision B:1973 | TARGET, PAPER AND PAPER ACCESSORIES |
| MIL-C-87972 Revision A:1987 | CASTERS, RIGID AND SWIVEL, GENERAL SPECIFICATION FOR |
| MIL H 27267 : B | HOSE TETRAFLUOROETHYLENE, HIGH TEMPERATURE, MEDIUM PRESSURE |
| MIL-G-16959 Revision B:1967 | GASKET, METALLIC, BOILER, ECONOMIZER AND SUPERHEATER HANDHOLE |
| DOD-STD-35-76 Revision A:1978 | AUTOMATED ENGINEERING DOCUMENT PREPARATION SYSTEM, THERMISTORS |
| MIL-DTL-13484 Revision G:2011 | SWITCH, SENSITIVE: 30 VOLTS DIRECT CURRENT MAXIMUM, WATERPROOF |
| MIL-DTL-12285 Revision G:2016 | SWITCHES, THERMOSTATIC |
| MIL-C-3635 Revision C:1978 | COMPASS, DRAFTING, BEAM |
| MIL-A-17682 Revision E:1982 | ADHESIVE, STARCH |
| MIL-D-52975 Base Document:1980 | DRAWING BOARD, ILLUMINATED, PORTABLE |
| MIL-R-52807 Revision B:1991 | ROLLER, TRANSOM, BAILEY BRIDGE |
| SAE AS 8905 : 2012 | FITTINGS AND CARGO RINGS, TIE-DOWN, AIRCRAFT FLOOR |
| MIL-DTL-4710 Revision E:2006 | CASE SET, TRANSPORT AND STORAGE |
| MIL-C-12103 Revision C:1963 | COMPUTER, STADIA, CIRCULAR SCALE |
| MIL-H-45193 Revision D:1985 | HEATER, GUN TYPE, ELECTRIC |
| MIL-T-85350 Revision B:1990 | TRANSMITTER, BEACON, LOCATOR T-1438/D |
| MIL-C-7135 Revision F:1967 | Compressor, Pneumatic, 3,000 PSI -- 2 SCFM Aero 2A (*), Aero 2A-1 (*), Aero 2B (*), and Aero 2B-1 (*) |
| MIL V 62547 : A (1) | VALVE AND CYLINDER ASSEMBLIES, HALON |
| MIL P 10813 : E | PLANETABLES, SURVEYING, WITH TRIPOD AND CARRYING CASES |
| MIL I 7231 : B | INDICATOR, TRUE AIRSPEED, SYNCHRO REPEATER TYPE N 1 |
| MIL-DTL-13623-1 Revision B:2010 | SWITCHES, ROTARY, 28 VOLT DC |
| AA-O-00235 Base Document:1962 | OFFICE FURNITURE, STEEL, SECTIONAL |
| MIL C 38359 : A | CABLE, POWER, ELECTRICAL, AIRPORT LIGHTING, CROSS-LINKED, POLYETHYLENE XLP |
| MIL-DTL-6484 Revision D:2007 | LIGHTS, COCKPIT UTILITY, AIRCRAFT, GENERAL SPECIFICATION FOR |
| DOD-STD-35-4 Revision C:1978 | AUTOMATED ENGINEERING DOCUMENT PREPARATION SYSTEM, CAPACITORS, FIXED |
| MIL T 27535 : A | TRANSFORMER, POWER, ISOLATION, SERIES CIRCUIT, AIRPORT LIGHTING, GENERAL SPECIFICATION FOR |
| MIL-A-85072 Revision A:1987 | ACTUATOR, ELECTROMECHANICAL, LINEAR |
| MIL-M-7255 Revision B:1969 | MANOMETER, PRESSURE, DIFFERENTIAL AND ABSOLUTE TYPE E 1 |
| MIL-DTL-23806 Revision B:2007 | CABLE, RADIO FREQUENCY, COAXIAL, SEMIRIGID, FOAM DIELECTRIC, GENERAL SPECIFICATION FOR |
| MIL-PRF-23145 Revision C:2018 | Inflation Assemblies, Life Preserver |
| AA-V-200 Revision A:1965 | VENETIAN BLINDS |
| MIL-M-6867 Revision C:1969 | MAGNETIC INSPECTION UNITS |
| MIL-DTL-5815 Revision H:2012 | ANTENNA, AIRBORNE, UHF - BAND, GENERAL SPECIFICATION FOR |
| MIL-I-27709 Revision A:1962 | INDICATOR, ATTITUDE ARU-14/A, REMOTE |
| MIL-Q-45970 Revision A:1975 | QUALITY ASSURANCE FOR WEAPONS AND SUPPORT MATERIAL |
| MIL I 47204 : 0 | INVERTER, POWER, STATIC |
| MIL P 62420 : 0 | PERISCOPE, TANK |
| MIL-E-5627 Revision B:1965 | EXTINGUISHERS, FIRE, CARBON DIOXIDE, PORTABLE |
| MIL-DTL-81963 Revision C:2011 | SERVOCOMPONENTS, PRECISION INSTRUMENT, ROTATING, COMMON REQUIREMENTS AND TESTS, GENERAL SPECIFICATION FOR |
| MIL-E-17341 Revision C:1970 | ENGINE, GAS TURBINE, PROPULSION & AUXILIARY NAVAL SHIPBOARD |
| MIL-B-13164 Revision A:1973 | BRIDGE, FIXED, STEEL, HIGHWAY, SEMIPERMANENT, 90-FOOT TRUSS SPAN |
| MIL-STD-1791 Revision C:2017 | DESIGNING FOR INTERNAL AERIAL DELIVERY IN FIXED WING AIRCRAFT |
| MIL-DTL-52649 Revision C:2009 | Engine Cold Starting Aids, Ether Fuel Primers |
| MIL-B-13506 Revision C:1984 | BEARING, SLEEVE (STEEL-BACKED) |
| MIL P 83207 : B | PITOT STATIC TUBE, NOSE BOOM, COMPENSATED, GENERAL SPECIFICATION FOR |
| MIL-T-83823 Base Document:1991 | TRUCK, FIRE FIGHTING (STRUCTURAL OR BRUSH STRUCTURAL) |
| MS75020 Revision F:2013 | CONNECTOR, PLUG, ELECTRICAL, - 12 CONTACT, INTERVEHICULAR, 28 VOLT, WATERPROOF |
| MIL-STD-129 Revision R:2014 | Military Marking for Shipment and Storage |
| MIL-PRF-83419 Revision F:2016 | ALTIMETER, SERVO CONTROLLED, AUTOMATIC PRESSURE STANDBY |
| MIL-T-26922 Revision D:1977 | TEST SET, ELECTRICAL POWER A/M24T-8() |
| MIL-B-385 Revision G:1985 | BREAKERS, PAVING, PNEUMATIC-POWERED (7/8-INCH HEXAGON BY 2-3/4-INCH CHUCK AND 7/8-INCH HEXAGON BY 3-1/4-INCH CHUCK) |
| MIL-HDBK-1473 Revision A:1997 | Color and Marking of Army Materiel |
| MIL-B-83769 Revision D:1983 | BATTERY, STORAGE, LEAD ACID, GENERAL SPECIFICATION FOR |
| SAE AS 6451 : 2013 | SHIELDS, PROTECTIVE, AIRCRAFT AND MISSILES |
| MIL-S-64052 Base Document:1988 | SPRAY GUN, PAINT, HEAVY DUTY, PRESSURE FEED |
| MIL-P-6457 Revision E:1974 | POWER SUPPLY, METALLIC RECTIFIER TYPE, GENERAL SPECIFICATION FOR |
| MIL-I-38338 Revision D:1991 | INDICATOR, OIL QUANTITY, CONTINUOUS TRANSMISSION, NUCLEONIC |
| MIL T 8878 : D | TURNBUCKLE, POSITIVE SAFETYING |
| MIL T 781 : D | TERMINAL, WIRE ROPE, SWAGING |
| MIL-D-82687 Base Document:1980 | DEVICE, ARMING FIRING, ROCKET MOTOR MARK 298 MOD O |
| MIL F 85406 : 0 | FUSE SYSTEM, JOINT SERVICE ELECTRONIC BOMB FMU-139/B |
| MIL-C-10101 Revision F:1968 | CASES, FIELD, OFFICE MACHINE (PLYWOOD) |
| MIL V 85855 : 0 | VALVE, QUICK DISCONNECT, FOR THE PROTECTIVE ASSEMBLY, CHEMICAL, RADIOLOGICAL |
| MIL-T-7305 Revision C:1987 | TRANSMITTER, PRESSURE TORQUE TYPE D 5 |
| MIL-S-16104 Revision B:1983 | |
| MIL-STD-1662 Revision C:1992 | ORDNANCE ALTERATION (ORDALT) INSTRUCTIONS, PREPARATION OF |
| MIL-C-3956 Revision C:1970 | CLOCK, MESSAGE CENTER M2 |
| MIL-P-997 Revision D:1966 | PLASTIC MATERIAL, LAMINATED, THERMOSETTING, ELECTRIC INSULATION, SHEETS, GLASS CLOTH, SILICONE RESIN |
| RR-C-550 Revision D:1991 | CONTAINER, FLUID, FOR PAINT SPRAY EQUIPMENT |
| MIL-V-21701 Revision B:1969 | VALVE, CHECK, OXYGEN MASK, INLET |
| MIL V 27166 : D | VALVE, PRESSURE EQUALIZING, GASEOUS PRODUCTS |
| MIL-I-27196 Revision C:1988 | INDICATOR, VERTICAL VELOCITY AAU-9/A, INTEGRALLY LIGHTED |
| MIL T 25620 : C | TESTER, OXYGEN MASK, HEADSET AND MICROPHONE, TYPE MQ-1A |
| MIL-R-85669 Base Document:1988 | REPEATER SET, RADIO, POD AN/ARQ-49 |
| MIL I 27279 : B | INDICATOR, MACH NUMBER AVU-11/A, INTEGRAL LIGHTING |
| MIL-C-11347 Revision E:1977 | CASES, BATTERY AND LIGHTING ACCESSORY, FOR SURVEYING EQUIPMENT |
| MIL P 14257 : C | PRINTER, REDUCTION, STEREOPLOTTER, MULTIPLEX |
| MIL A 27434 : A | ADAPTER, CONNECTOR, COAXIAL, RADIO FREQUENCY, BETWEEN SERIES, GENERAL SPECIFICATION FOR |
| MIL C 55235 : 0 | CONNECTOR, COAXIAL, RADIO FREQUENCY, SERIES TPS |
| MIL G 9398 : C | GENERATOR, TACHOMETER, TWO POLE HIGH TEMPERATURE AIRCRAFT |
| MIL-B-53067 Base Document:1987 | BOAT, RECONNAISSANCE/LANDING ASSAULT, INFLATABLE: 3-, 7-, 15-PERSON |
| MIL-C-5499 Revision B:1984 | CORE, AIRCRAFT, HIGH PRESSURE AIR VALVE |
| MIL-I-27202 Revision A:1980 | INDICATOR, ELECTRICAL TACHOMETER, 0-110 PERCENT RPM 2-INCH SIZE, INTEGRALLY LIGHTED |
| MIL I 18369 : C | INFLATION EQUIPMENT, CARBON DIOXIDE, FOR MULTIPLACE LIFE RAFTS |
| MIL-B-45989 Revision C:1985 | BALANCER, VEHICLE WHEEL, BUBBLE-TYPE, PORTABLE |
| MIL B 83424 : 0 | BATTERY SYSTEMS, SEALED CELL, NICKEL CADMIUM, INTEGRAL CHARGE CONTROL, AIRCRAFT, GENERAL SPECIFICATION FOR |
| MIL-S-12645 Revision C:1984 | SLINGS, ENDLESS, FIBER ROPE AND NYLON WEBBING |
| MIL-A-81724 Base Document:1969 | ADAPTER, LAUNCHER, AIRCRAFT, ADU-299/E |
| MIL P 13949 : G (1) SUPP 1 | SHEET, PRINTED WIRING BOARD, GENERAL SPECIFICATION FOR |
| MIL-A-27042 Revision A:1961 | ADAPTER, TEST MX-3413/GWM-4 |
| MIL-DTL-27193 Revision D:2017 | INDICATOR, ATTITUDE ARU-2B/A |
| MIL-A-24366 Base Document:1969 | AMPLIFIER SYSTEM, AUDIO, LOW NOISE, HIGH INPUT IMPEDANCE |
| MIL-P-43116 Revision A:1964 | PIKE,WIRE AND PIKES, POLE |
| MIL-F-51369 Revision B:1979 | FILTERS, GAS: RECIRCULATION (550 CFM AND 1200 CFM) |
| MIL-T-45568 Revision G:1986 | TEST SET, TACHOMETER-DWELL |
| DOD N 70329 : 0 | NUT, PLAIN, ROUND, BALL AND ROLLER BEARINGS, METRIC, GENERAL SPECIFICATION FOR |
| MIL M 7584 : A | METER, FUEL FLOW SYNCHRO STYLE TYPE B 3A |
| MIL-C-10632 Revision C:1973 | COVERS AND CASES, TEXTILE, ARMY EQUIPMENT, GENERAL SPECIFICATION FOR |
| MIL H 26312 : A NOTICE 1 | HEADSET AND MICROPHONE H AND 157-AIC |
| MIL-S-416 Revision D:1979 | STRAINER, WELL, WATER, WIRE WOUND |
| MIL-T-52993 Base Document:1981 | TABLE, PHOTOINTERPRETER & ANALYST, ILLUMINATED, SPLIT STAGE |
| MIL S 0053085 : A | SURVEY INSTRUMENT AUTOMATED, INTEGRATED (AISI) |
| MIL-V-81356 Revision B:1992 | VALVE, FUEL SYSTEM PRESSURIZATION AND VENT |
| MIL-C-23367 Base Document:1963 | COMPUTER, FLIGHT DIRECTOR, AIRCRAFT |
| MIL DTL 18396 : E | SWITCHES, METER AND CONTROL, NAVAL SHIPBOARD |
| MIL-V-23151 Revision B:1967 | VOLTMETER, EXPANDED SCALE SWITCHBOARD TYPE (NAVAL SHIPBOARD USE) |
| MIL-DTL-25949 Revision F:1995 | ACCELEROMETER, AIRCRAFT RANGE -5 TO 10G UNITS, INTEGRALLY LIGHTED |
| SAE AS 8091 : 2014 | AIRCRAFT JACKING PADS ADAPTERS AND SOCKETS DESIGN AND INSTALLATION OF |
| SAE AS 1710 : 2014 | COUPLING, FUEL, FLEXIBLE, VARIABLE CAVITY, THREADED TYPE WITH FERRULES |
| DSCC 11005 : 0 | PRINTED WIRING BOARD, RIGID FLEX, TYPE 5 (MULTILAYER) WITH UNSUPPORTED HOLES, WITH OR WITHOUT STIFFENER |
| ASTM F 2431 : 2004 : R2012 | Standard Specification for Ring Bearing, Inner: For Needle Roller Bearing with Thick Outer Ring |
| SAE AS 22598 : 1999 | INTERPRETATION KIT, PHOTOGRAPHIC, POCKET-SIZE BS-5( ) |
| SAE ARP 94910 : 2012 | AEROSPACE - VEHICLE MANAGEMENT SYSTEMS - FLIGHT CONTROL DESIGN, INSTALLATION AND TEST OF, MILITARY UNMANNED AIRCRAFT, SPECIFICATION GUIDE FOR |
| SAE AS 23190 : 2015 | WIRING, POSITIONING, AND SUPPORT ACCESSORIES |
| ISO 28219:2017 | Packaging — Labelling and direct product marking with linear bar code and two-dimensional symbols |
| ASTM F 2163 : 2001 : R2008 | Standard Specification for Ring, Bearing, Inner: for Needle Roller Bearing With Drawn Outer Ring |
| SAE AS 23479 : 2012 | INDICATOR, PRESSURE, 1 1/2-INCH, INTEGRALLY LIGHTED |
| SAE AS 5944 : 1999 | SLINGS, AIRCRAFT, GENERAL SPECIFICATION FOR |
| ASTM F 2590 : 2006 | Standard Specification for Bearing, Roller, Thrust, Two Channeled Race Surface, Rigid or Flat Seat Type |
| ASTM F 2430 : 2004 | Standard Specification for Bearing, Roller, Needle: Assembly (Thick Outer Race) |
| ASTM E 2631 : 2009 | Standard Practice for Physical Placement of an Entity-Controlled Supplemental Identification Label |
| SAE AS 1501 : 1994 | HOSE, AIR DUCT, FLEXIBLE, NONMETALLIC, AIRCRAFT |
| ASTM F 2332 : 2006 | Standard Specification for Annular Ball Bearings for Instruments and Precision Rotating Components |
| ASTM F 1347 : 1991 : R2012 | Standard Specification for Manually Operated Fueling Hose Reels |
| SAE AS 1946 : 2015 | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, METALLIC REINFORCED, UP TO 1500 PSI AND 450 DEGREES F, HYDRAULIC AND PNEUMATIC |
| ASTM F 2246 : 2006 | Standard Specification for Bearing, Roller, Needle: Thick Outer Ring With Rollers and Cage |
| MIL-DTL-25026 Revision C:2011 | INDICATOR, TEMPERATURE, THERMOCOUPLE, ENGINE EXHAUST, TYPE MJ-4 |
| MIL-STD-2088 Revision B:2007 | BOMB RACK UNIT (BRU), SINGLE STORE, AIRCRAFT |
| MIL-DTL-82001 Revision F:2013 | Cable Assembly, Special Purpose, Electrical, Intervehicular (24 Volt to 12 Volt Reduction) |
| MIL-A-52963 Revision B:1986 | AIR CONDITIONER: SPLIT-PACKAGE, 208-VOLT, 3-PHASE, 400-HERTZ, AC, 18,000 BTU/HR COOLING, 30,000 BTU/HR HEATING |
| MIL-DTL-83797 Revision C:2008 | HOSE, RUBBER, LIGHTWEIGHT, MEDIUM PRESSURE, GENERAL SPECIFICATION FOR |
| DEFSTAN 00-970(PT0)/9(2012) : 2012 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| MIL-P-23460 Revision E:1991 | PIN, QUICK-RELEASE, SELF-RETAINING POSITIVE-LOCKING |
| MIL-U-3963 Revision A:1958 | UNIVERSAL JOINT, ANTIFRICTION BEARINGS |
| MIL H 25579 : E | HOSE ASSEMBLY, TETRAFLUOROETHYLENE, HIGH TEMPERATURE MEDIUM PRESSURE, GENERAL REQUIREMENTS FOR |
| MIL-C-28809 Revision B:1988 | CIRCUIT CARD ASSEMBLIES, RIGID, FLEXIBLE & RIGID FLEX |
| MIL-T-462 Revision E:1985 | TANK, LIQUID STORAGE, METAL, FUEL OIL, HORIZONTAL |
| MIL-DTL-3607 Revision C:2009 | Connectors, Coaxial, Radiofrequency, Series for Pulse, General Specification for |
| MIL-C-6985 Revision B:1966 | CLAMP, HOSE |
| MIL-DTL-28778 Revision A:2005 | TRANSFORMER, POWER, STEPUP, 3 PHASE |
| MIL-PRF-83812 Revision D:2011 | FORKLIFT, TRUCK, 10,000 AND 13,000 POUND CAPACITY, ADVERSE TERRAIN |
| MIL-H-12394 Revision D:1976 | HEATERS, WATER, LIQUID FUEL |
| MIL-PRF-17773 Revision D:2015 | SWITCH, BUS TRANSFER, ELECTRIC POWER, AUTOMATIC |
| MIL-E-24269 Revision B:1988 | EXTINGUISHER, FIRE, CARBON DIOXIDE, 15 POUND, PORTABLE, PERMANENT SHUTOFF, NAVY SHIPBOARD USE |
| MIL-PRF-31031 Revision C:2014 | CONNECTORS, ELECTRICAL, PLUGS AND RECEPTACLES, COAXIAL, RADIO FREQUENCY, HIGH RELIABILITY, FOR FLEXIBLE AND SEMIRIGID CABLES, GENERAL SPECIFICATION FOR |
| MIL-DTL-17361 Revision G:2006 | CIRCUIT BREAKER TYPES AQB/NQB, AIR, ELECTRIC, LOW VOLTAGE, INSULATED HOUSING (SHIPBOARD USE), GENERAL SPECIFICATION FOR |
| MIL-C-10933 Revision E:1985 | CHILLED WATER UNITS, BAKERY |
| MIL-DTL-52031 Revision E:2009 | EXTINGUISHER, FIRE, VAPORIZING-LIQUID CF[3]BR - HAND-HELD WITH BRACKET |
| MIL-C-4751 Revision D:1983 | CASTERS, RIGID AND SWIVEL, PRECISION HEAVY DUTY, AND SHOCK ABSORBING |
| MIL-DTL-22641 Revision G:2016 | ADAPTERS, COAXIAL TO WAVEGUIDE, GENERAL SPECIFICATION FOR |
| DEFSTAN 00-970(PT0)/17(2016) : 2016 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| MIL-P-52327 Revision C:1990 | PUMPS, CENTRIFUGAL, ELECTRIC-MOTOR-DRIVEN, POSITIVE PRIME, PETROLEUM PRODUCTS, AIRFIELD DEFUELLING AND RECEIVING |
| MIL-PRF-32484 Base Document:2013 | PROTECTIVE RELAYS AND ATTACHMENTS, MEDIUM VOLTAGE VACUUM CIRCUIT BREAKER APPLICATIONS |
| MIL-A-52424 Revision B:1984 | AIR CONDITIONERS: WALL- OR BASE-MOUNTED, SELF-CONTAINED, MULTIPACKAGE, STANDARD WEIGHT, AIR-COOLED, 6,000-BTU/HR |
| MIL-C-13874 Revision K:1992 | COMPRESSORS, RECIPROCATING AND ROTARY, AIR, ELECTRIC MOTOR DRIVEN |
| MIL-C-19179 Revision B:1963 | COUPLING ASSEMBLY, QUICK-DISCONNECT, FUEL |
| MIL-C-63550 Revision E:1985 | CABLE ASSEMBLIES, ELECTRICAL, FABRICATION SPECIFICATION FOR |
| MIL-STD-35-72 Base Document:1974 | AUTOMATED ENGINEERING DOCUMENT PREPARATION SYSTEM, ACTUATORS, ELECTROMECHANICAL, ROTARY |
| MIL-V-87939 Base Document:1989 | VAPOR-SUPPRESSING - FIRE EXTINGUISHING AGENT, FOAM CONCENTRATES FOR USE ON HYPERBOLIC PROPELLANTS |
| MIL-DTL-13253 Revision E:2007 | HANDSETS, GENERAL SPECIFICATION FOR |
| MIL-T-83303 Revision C:1988 | TRUCK, FIREFIGHTING, AIRFIELD RAMP, 4X4, A/S32P-20, TWIN AGENT, SKID MOUNTED |
| MIL-PRF-39012 Revision F:2014 | CONNECTORS, COAXIAL, RADIO FREQUENCY, GENERAL SPECIFICATION FOR |
| QQ-S-571 Revision F:1994 | SOLDER, ELECTRONIC (96 TO 485 DEGREES C) |
| MIL E 52031 : D | EXTINGUISHER, FIRE, VAPORIZING LIQUID CF3BR, 2-3/4 POUND, WITH BRACKET |
| MS51115 Revision B:2008 | Coil, Ignition-24 Volt DC (Without Internal Ballast) (No S/S Document) |
| MIL-DTL-25531 Revision F:2013 | Coupling Half, Quick Disconnect, Pneumatic Starter, External, Low Pressure |
| MIL-DTL-13735 Revision H:2017 | Switches, Toggle: 28 Volt DC |
| MIL-F-22978 Revision A:1963 | FASTENER, ROTARY, QUICK-OPERATING, HIGH STRENGTH (ASG) |
| MIL-A-81973 Base Document:1974 | AIRCREW AUTOMATED ESCAPE SYSTEMS, TEST VEHICLES FOR GROUND TRACK PERFORMANCE TESTING, ROCKET AND/OR JET ENGINE PROPELLED; GENERAL SPECIFICATION FOR |
| DEFSTAN 00-970(PT0)/7(2011) : 2011 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| MIL-DTL-32485 Base Document:2013 | CIRCUIT BREAKERS, VACUUM TYPE (VCB), ELECTRIC POWER, MEDIUM VOLTAGE, ALTERNATING CURRENT, DRAW-OUT REMOVABLE CONSTRUCTION, WITHOUT INTERNAL OVERCURRENT PROTECTION |
| MIL-PRF-32565 Revision A:2017 | BATTERY, RECHARGEABLE, SEALED, 6T LITHIUM-ION |
| MIL-DTL-45068 Revision E:2006 | LIGHT, DOME, VEHICULAR, 24 VOLT DC |
| DEFSTAN 00-970(PT0)/14(2014) : 2014 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| MIL BULL 343 : A | DOCUMENTS APPLICABLE TO AIRCRAFT ENGINES AND PROPELLERS, USE OF |
| MIL-P-53065 Base Document:1986 | PUMPING UNIT, FRAME MOUNTED, 1-1/2 INCH, ELECTRIC MOTOR DRIVEN, 35 GPM AT 25 FEET TOTAL HEAD |
| W-R-550 Revision A:1975 | ROD, GROUND (WITH ATTACHMENTS) |
| MIL F 83798 : B | FITTING, RUBBER HOSE, LIGHTWEIGHT MEDIUM PRESSURE, GENERAL SPECIFICATION FOR |
| MIL-C-24066 Revision C:1992 | CLIP, COMPONENT, NON-ELECTRICAL, GENERAL SPECIFICATION FOR |
| MIL-STD-1365 Revision C:2010 | GENERAL DESIGN CRITERIA FOR HANDLING EQUIPMENT ASSOCIATED WITH WEAPONS AND RELATED ITEMS |
| MIL-R-13877 Revision D:1987 | REGULATOR, OXYGEN, ACETYLENE, WELDING APPLICATION |
| MS51114 Revision D:2008 | Coil, Ignition-24 Volt DC (With Internal Ballast) (No S/S Document) |
| MIL-C-14370 Revision D:1977 | COMPRESSOR, RECIPROCATING, POWER-DRIVEN, OPEN-TYPE, FOR USE WITH REFRIGERANT-12 |
| MIL-STD-35-73 Base Document:1974 | AUTOMATED ENGINEERING DOCUMENT PREPARATION SYSTEM, ACTUATORS, ELECTROMECHANICAL, LINEAR |
| AA-R-200 Revision F:1987 | REFRIGERATOR, MECHANICAL, COMMERCIAL, SELF-CONTAINED, REACH-IN AND PASS-THROUGH |
| MIL-T-53101 Base Document:1990 | TANKS, FABRIC, COLLAPSIBLE, 3000, 10,000 & 20,000 GALLON, PETROLEUM, LOW TEMPERATURE |
| MIL-DTL-87104 Revision C:2014 | COAXIAL ASSEMBLIES, GENERAL SPECIFICATION FOR |
| MIL-S-6451 Revision E:1977 | SHIELD, PROTECTIVE, AIRCRAFT AND MISSILES |
| MIL-DTL-70329 Revision A:2009 | Nut, Plain, Round, Ball and Roller Bearings, Metric, General Specification for |
| DEFSTAN 00-970(PT0)/12(2014) : 2014 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| MIL-DTL-7788 Revision H:2011 | PANELS, INFORMATION, INTEGRALLY ILLUMINATED |
| MIL-H-8775 Revision D:1976 | HYDRAULIC SYSTEM COMPONENTS, AIRCRAFT AND MISSILES GENERAL SPECIFICATION FOR |
| MIL-DTL-83796 Revision B:2008 | HOSE ASSEMBLY, RUBBER, LIGHTWEIGHT, MEDIUM PRESSURE, GENERAL SPECIFICATION FOR |
| MIL H 51191 : D NOTICE 1 | HEATER, AIR, ELECTRIC, FILTER UNIT, M3 |
| MIL-I-24683 Revision A:1990 | INSULATION ELECTRICAL, HIGH TEMPERATURE INORGANIC PAPER |
| DEFSTAN 00-970(PT0)/15(2015) : 2015 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| MIL-C-7580 Revision C:1989 | COUPLING, FIRE HOSE, REUSABLE HIGH PRESSURE |
| MIL-DTL-917 Revision F:2014 | ELECTRIC POWER EQUIPMENT, BASIC REQUIREMENTS FOR |
| MIL-A-83477 Revision A:1976 | AIR CONDITIONER, A/M32C-18 TRAILER MOUNTED, DIESEL ENGINE DRIVEN |
| MIL-DTL-5523 Revision E:2011 | VALVE; RELIEF, HYDRAULIC PRESSURE |
| MIL T 28800 : E | TEST EQUIPMENT FOR USE WITH ELECTRICAL AND ELECTRONIC EQUIPMENT GENERAL SPECIFICATION FOR |
| DEFSTAN 00-970(PT0)/13(2014) : 2014 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| DEFSTAN 00-970(PT0)/11(2013) : 2013 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| MIL-PRF-7115 Revision G:2012 | CONVERTERS, AIRCRAFT, GENERAL SPECIFICATION FOR |
| MIL-C-6818 Revision D:1973 | CLAMP, INSTRUMENT MOUNTING AIRCRAFT |
| MIL-N-52110 Revision F:1982 | NOZZLE, FUEL & OIL SERVICING, NONAUTOMATIC SHUTOFF & NOZZLES, FUEL SERVICING AUTOMATIC SHUTOFF |
| MIL-A-43657 Base Document:1969 | ABSORBER, VAPOR, SYNTHETIC SOLVENT DRY CLEANING UNITS |
| NNN-O-001191 Base Document:1966 | OVEN LABORATORY |
| MIL-DTL-32360 Base Document:2010 | STOP LIGHT - TAILLIGHT, VEHICULAR-24 VOLT, SERVICE STOP, SERVICE TAIL, BLACKOUT TAIL |
| MIL-HDBK-508 Base Document:1998 | WIRING AND WIRING DEVICES FOR COMBAT AND TACTICAL VEHICLES, SELECTION AND INSTALLATION OF |
| MIL-DTL-52286 Revision D:2010 | CABLE ASSEMBLIES, POWER, ELECTRICAL (WITH MOLDED ON TERMINATIONS), GENERAL SPECIFICATION FOR |
| MIL-W-44167 Revision B:1992 | WASHING MACHINE, LAUNDRY: OPEN END TYPE, TRAILER MOUNTED |
| MIL H 62540 : 0 | HARNESS AND CABLE ASSEMBLIES |
| MIL-T-83965 Revision B:1990 | TRUCK, FIRE FIGHTING, A/S32P-10, FORCIBLE ENTRY |
| MIL-DTL-5099 Revision C:2011 | INDICATOR, CABIN AIR PRESSURE, 1-7/8 INCH DIAL, TYPE MA-1 |
| MS28882 Revision G:2009 | VALVE, FUEL CHECK, LOW PRESSURE, GASKET SEAL STRAIGHT THREAD CONNECTION |
| OO-K-220 Revision C:2015 | KEY, MACHINE |
| MIL-S-503 Revision B:1988 | SIREN, ELECTRIC, 2 AND 5 HORSEPOWER |
| MIL-DTL-22263 Revision C:2009 | Coupling Fuel Line, Flexible, 125 PSI General Specification for |
| MIL-G-81559 Revision C:1984 | GYROSCOPE ASSEMBLIES ATTITUDE - DIRECTIONAL REFERENCE INSTRUMENTS FOR AIRCRAFT PACKAGING OF |
| MS28884 Revision F:2009 | VALVE, FUEL CHECK, LOW PRESSURE, FLARED TUBE CONNECTION |
| MIL-STD-339 Base Document:1987 | WIRING AND WIRING DEVICES FOR COMBAT AND TACTICAL VEHICLES, SELECTION AND INSTALLATION OF |
| MIL-B-45908 Revision B:1985 | BOLT, EYE, GENERAL SPECIFICATION FOR |
| MIL-B-43866 Revision C:1986 | BREAD-SLICING MACHINE, ELECTRIC-OPERATED, MULTIPLE KNIFE |
| MS21430 Revision B:2009 | VALVE, CHECK, FUEL AND AIR, POPPET TYPE, ZERO, LEAK |
| DEFSTAN 00-970(PT0)/8(2011) : 2011 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| MIL-DTL-27723 Revision F:2013 | Probe, Total Temperature, Deiceable |
| MIL F 9490 : D | FLIGHT CONTROL SYSTEMS - DESIGN, INSTALLATION AND TEST OF PILOTED AIRCRAFT, GENERAL SPECIFICATION FOR |
| MIL-D-28728 Revision B:1986 | DIAL, CONTROL, MULTI-TURN COUNTERS, GENERAL SPECIFICATION FOR |
| MIL V 5523 : D | VALVE, RELIEF, HYDRAULIC PRESSURE |
| MIL-DTL-32496 Base Document:2014 | GENERATOR SETS, SKID MOUNTED, TRAILER MOUNTED ADVANCED MEDIUM-SIZED MOBILE POWER SOURCES, TACTICAL DIESEL FUEL DRIVEN, ALTERNATING CURRENT 5 THROUGH 60 KILOWATTS, GENERAL SPECIFICATION FOR |
| DEFSTAN 00-970(PT0)/16(2015) : 2015 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| DEFSTAN 00-970(PT0)/10(2013) : 2013 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| MIL-C-11085 Revision D:1986 | CONVEYOR, BELT; (FLAT, SKID-MOUNTED, ELECTRIC-MOTOR-DRIVEN, 24-INCH-WIDE BELT, 50-FOOT-LONG FRAME; CAPACITY, 25 POUNDS PER FOOT, 75 TONS PER HOUR) |
| MIL-B-43878 Base Document:1974 | BROILER, SELF-CLEANING, ELECTRIC; COUNTER MODEL |
| MIL-B-8952 Revision B:1995 | BEARING, ROLLER, ROD END, ANTIFRICTION, SELF-ALIGNING |
| MIL-D-23615 Revision C:1993 | DESIGN AND EVALUATION OF CARTRIDGE ACTUATED DEVICES |
| MIL-DTL-5589 Revision E:1999 | EARPHONE, (EXTENDED RANGE), H-301/U |
| MIL-DTL-12632 Revision E:2016 | LOUDSPEAKERS, PERMANENT MAGNET (ENCASED, 2-WATT, FUNGUS-, GUNBLAST-, AND IMMERSION-RESISTANT), GENERAL SPECIFICATION FOR |
| MIL-DTL-6162 Revision C:2000 | GENERATORS AND STARTER-GENERATORS, ELECTRICAL DIRECT CURRENT, NOMINAL 30 VOLTS, AIRCRAFT GENERAL SPECIFICATION FOR |
| DOD I 24683 : 1987 | INSULATION ELECTRICAL, HIGH TEMPERATURE INORGANIC PAPER |
| MIL-DTL-87223 Revision A:2008 | VALVES, PRESSURE, ANTI-G SUIT, MXU-804/A AND MXU-805/A |
| MIL-H-25475 Revision B:1971 | HYDRAULIC SYSTEM, MISSILE, DESIGN, INSTALLATION TESTS AND DATE REQUIREMENTS, GENERAL REQUIREMENTS FOR |
| MIL-C-85521 Base Document:1983 | CONCENTRATOR, OXYGEN, GGU-7/A |
| MIL A 7291 : A | ANTENNA AT-191B/AP |
| MIL-DTL-27267 Revision D:2012 | Hose, Cres Wire Reinforced, Polytetrafluoroethylene, Four Hundred Fifty Degree Fahrenheit, Medium Pressure |
| DOD-F-24610 Base Document:1982 | FIXANT, HOLD DOWN |
| MIL-W-585 Revision E:1976 | WIRE FABRIC, STEEL, WELDED |
| MIL-DTL-24317 Revision B:2010 | SWITCHES, MULTISTATION, PUSHBUTTON, ILLUMINATED AND NON-ILLUMINATED), GENERAL SPECIFICATION FOR |
| SAE AS 1188 : 2014 | AIRCRAFT TIRE INFLATION-DEFLATION EQUIPMENT |
| MIL V 7891 : E | VALVE, OXYGEN FILLER, LOW AND PRESSURE |
| MIL-W-63150 Base Document:1977 | WEAPONS AND SUPPORT MATERIAL STANDARD QUALITY ASSURANCE PROVISIONS FOR |
| MIL-S-26547 Revision C:1985 | STARTER-GENERATOR ENGINE STU-6A |
| MIL-C-85829 Base Document:1989 | COUPLING ASSEMBLY, HOSE, CHEMICAL, BIOLOGICAL, RADIOLOGICAL PROTECTIVE |
| MIL-HDBK-288 Revision B:1991 | REVIEW AND ACCEPTANCE OF ENGINEERING DRAWING PACKAGES |
| MIL-I-6447 Revision C:1974 | INDICATOR, TRUE AIRSPEED TYPE M 1A |
| DOD-S-70339 Base Document:1988 | SEAL RING, METAL AND NON-METAL, FLAT, METRIC GENERAL SPECIFICATION FOR |
| MIL-V-25023 Revision B:1967 | VALVE, FUEL DRAIN, SELF-LOCKING |
| MIL-G-19053 Revision C:1957 | GAGE - AIRCRAFT, CAPACITANCE, LIQUID OXYGEN CONVERTER, GENERAL SPECIFICATION FOR |
| MIL-DTL-15370 Revision K:2015 | COUPLERS, DIRECTIONAL, GENERAL SPECIFICATION FOR |
| MIL-B-52199 Revision C:1992 | BRACKET, OUTBOARD MOTOR, FOR ALUMINUM HALF PONTOON |
| MIL-PRF-27260 Revision D:2013 | TIE DOWN, CARGO, AIRCRAFT CGU-1/B |
| MIL-STD-2097 Revision A:1989 | ACQUISITION OF SUPPORT EQUIPMENT AND ASSOCIATED INTEGRATED LOGISTICS SUPPORT |
| MIL-L-7806 Revision A:1956 | LIGHT, PANEL, PLASTIC PLATE, LIGHTING |
| MIL-M-87113 Revision A:1993 | MASK, OXYGEN, MBU-10/P |
| SAE AS 85560 : 2013 | BEARINGS, FIBER REINFORCED PLASTIC, SLEEVE, PLAIN, AND FLANGED, SELF-LUBRICATING; GENERAL SPECIFICATION FOR |
| MIL V 13803 : E | VALVE, GATE, DOUBLE DISC, CAST IRON OR STEEL |
| MIL-PRF-53090 Revision B:2016 | BLADE, MINE CLEARING |
| MIL-P-52632 Revision D:1976 | POWER PLANT, UTILITY:MUST HOSPITAL SYSTEM |
| MIL-C-0052980 Revision C:1994 | COMPRESSORS, RECIPROCATING AND ROTARY, AIR DIESEL-ENGINE-DRIVEN, OR GASOLINE-ENGINE-DRIVEN |
| GG-T-35 Revision C:1989 | TABLE; DRAWING, TRACING, AND SCRIBING |
| DOD-STD-35-71 Revision A:1983 | AUTOMATED ENGINEERING DOCUMENT PREPARATION SYSTEM SWITCHES (THERMAL) |
| MIL-S-24187 Revision E:1991 | SWITCH ASSEMBLIES, LINEAR MOVEMENT, MANUAL AND REMOTE OPERATION, GENERAL SPECIFICATION FOR |
| SAE AMS F 24610 : 2016 | FIXANT, HOLD DOWN |
| MIL-H-4607 Revision E:1987 | HEATER, ENGINE AND SHELTER, GROUND |
| MIL-A-49095 Revision A:1976 | AMPLIFIER, AUDIO FREQUENCY AM-6747()/V |
| A-A-59338 Revision A:1999 | WATER QUALITY ANALYSIS SET: PURIFICATION (WQAS-P) |
| MIL-M-19417 Revision D:1992 | Mask Assemblies, Oxygen and Smoke, Full Face |
| MIL-B-52734 Revision C:1991 | BRIDGE FLOATING RIBBON INTERIOR BAY AND RAMP BAY |
| MIL-DTL-25708 Revision F:2008 | ANTENNAS, BLADE, L-BAND, GENERAL SPECIFICATION FOR |
| DOD-STD-35-85 Revision A:1978 | AUTOMATED ENGINEERING DOCUMENT PREPARATION SYSTEM-FANS AND IMPELLERS |
| MIL-T-52114 Revision G:1991 | THEODOLITE, SURVEYING, DIRECTIONAL, THIRD ORDER |
| MIL-B-53107 Base Document:1990 | BRIDGE, LIGHT ASSAULT 23 METER SPAN |
| SAE MA 4098 : 2015 | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, HEAVY DUTY, METALLIC REINFORCED, 204 DEGREE C, 35000 KPA, HYDRAULIC AND PNEUMATIC, METRIC |
| MS53075 Revision C:2011 | CAP, FUEL TANK TACTICAL VEHICLE, NON-VENTED |
| MIL-B-25084 Base Document:1955 | BEACON, RADIO AN-APN 69 |
| SAE MA 620 : 2015 | HOSE ASSEMBLIES, CONVOLUTED POLYTETRAFLUOROETHYLENE METALLIC REINFORCED, HIGH TEMPERATURE, MEDIUM PRESSURE, AIRCRAFT METRIC |
| EIA CMB 6-1 : 2014 STABILIZED | CONFIGURATION AND DATA MANAGEMENT REFERENCES |
| SAE ARP 4378 : 2017 | ACCUMULATOR, HYDRAULIC, WELDED BELLOWS, FACTORY PRE-CHARGED |
| DOD-STD-35-19 Revision A:1984 | AUTOMATED ENGINEERING DOCUMENT PREPARATION SYSTEM TERMINALS AND TERMINAL STRIPS |
| MIL C 3702 : B | CABLE, POWER, ELECTRICAL, IGNITION, HIGH TENSION |
| MIL-T-52942 Revision C:1996 | TRUCK, FIRE FIGHTING: PUMPER, 1000 GPM; LADDER/WATER TOWER COMBINATION |
| MIL C 47009 : B | COMPOUND, SILICONE, HEAT SINK |
| MIL R 23016 : A | RADIO SET AN/ARC-94 |
| MIL-D-12491 Revision E:1989 | DEGREASER, SOLVENT, TANK IMMERSION TYPE |
| MIL-P-85710 Base Document:1986 | PARACHUTES, PERSONNEL, EMERGENCY ESCAPE GENERAL DESIGN SPECIFICATION FOR |
| MIL-STD-1389 Revision D:1989 | DESIGN REQUIREMENTS FOR STANDARD ELECTRONIC MODULES |
| MIL F 83870 : A | FILTER ELEMENT, FLUID PRESSURE, TRANSMISSION, AIRCRAFT DISPOSABLE, 20 MICRON ABSOLUTE |
| MIL-F-29419 Base Document:1985 | FRAME, SHIPPING [SIXCON] |
| MIL-G-25507 Revision B:1991 | GAGE, PRESSURE, DIAL INDICATING, OXYGEN 0-2000 PSI |
| MIL-V-10386 Revision E:1977 | SWING, CAST-IRON AND STEEL |
| SAE ARP 1281 : 2002 | ACTUATORS: AIRCRAFT FLIGHT CONTROLS, POWER OPERATED, HYDRAULIC, GENERAL SPECIFICATION FOR |
| MIL-G-83872 Revision A:1977 | GYROSCOPE, DISPLACEMENT, TYPE SBU-23/A |
| MIL E 27005 : A | EXPLOSIVE KIT, PARACHUTE RELEASE MLU-5/B AND EXPLOSIVE KIT, PARACHUTE RELEASE MLU-7/B |
| DOD-STD-35-82 Revision A:1979 | AUTOMATED ENGINEERING DOCUMENT PREPARATION SYSTEM CONVERTERS AND INVERTERS |
| MIL-DTL-25427 Revision B:2009 | COUPLING ASSEMBLY, HYDRAULIC, SELF SEALING, QUICK DISCONNECT, GENERAL SPECIFICATION FOR |
| MIL-DTL-32435 Base Document:2013 | Hose, Polytetrafluoroethylene, Convoluted, 450 Degrees F, Medium Pressure |
| SAE ARP 1538 : 2013 | ARRESTING HOOK INSTALLATION, LAND-BASED AIRCRAFT |
| MIL-DTL-55023 Revision D:2011 | MANOMETERS, U-TUBE AND CURVED TUBE |
| MIL E 17807 : C | ELEVATOR, WEAPON AND CARGO, ELECTROMECHANICAL (SHIPBOARD) |
| MIL-S-12840 Revision H:1992 | SADDLE ASSEMBLY, STEEL AND PLYWOOD, FOR 24-TON, 2-PART PNEUMATIC FLOAT, PONTOON BRIDGE |
| MIL-C-7413 Revision B:1970 | COUPLING, QUICK DISCONNECT, AUTOMATIC SHUTOFF, GENERAL SPECIFICATION FOR |
| MIL I 38120 : A (3) | INDICATOR, RATE OF FLOW AND TRANSFER EFU 20/A |
| MIL-A-6752 Revision A:1953 | AMMETER, VOLTMETERS, AND LOADMETERS; DIRECT CURRENT |
| MIL-PRF-83817 Revision C:2017 | TRUCK, LIFT, FORK, 4,000 POUND CAPACITY, VARIABLE REACH, ROUGH TERRAIN |
| MIL-B-16115 Revision G:1991 | BUOYS, MOORING, AND MARKER |
| MIL-W-22248 Revision A:1971 | WELDMENTS, ALUMINUM AND ALUMINUM ALLOY |
| MIL C 22931 : B | CABLE, RADIO FREQUENCY, SEMIRIGID, COAXIAL, SEMI-AIR-DIELECTRIC, GENERAL SPECIFICATION FOR |
| MIL-DTL-13625 Revision G:2017 | SWITCHES, PULL; SWITCHES, PUSH; SWITCHES, BEAM SELECTING, HEADLIGHT: ELECTRICAL (28 VOLTS DC MAXIMUM, FOR MILITARY VEHICLES) |
| MIL-DTL-49292 Revision B:2006 | Cable Assemblies, Nonpressure Proof, Fiber Optic, Metric, General Specification for |
| MIL-PRF-8932 Revision B:1998 | SWITCHES, PRESSURE, BULKHEAD MOUNTED, AIRCRAFT, GENERAL SPECIFICATION FOR |
| MIL DTL 4946 : E | ANTENNA ASSEMBLY AT-197()/GR |
| MIL-I-48632 Base Document:1986 | INTEGRATED CIRCUIT, DIGITAL CMOS CONTROL AND TIMING BASE, MONOLITHIC, SILICON |
| MIL-P-20192 Revision D:1982 | POLE, RANGE, METAL, WITH CASE |
| AA-D-195 Revision B:1961 | DESK, FLAT TOP, STEEL, CONFERENCE TYPE |
| MIL-G-24260 Base Document:1967 | GENERATOR SET, DIESEL ENGINE, 100 KW, 120-VOLT D.C., 1800 R.P.M. |
| MIL H 83796 : 0 | HOSE ASSEMBLY, RUBBER, LIGHTWEIGHT, MEDIUM PRESSURE, GENERAL SPECIFICATION FOR |
| MIL-C-4109 Revision F:1986 | COUPLING ASSEMBLY, LOW PRESSURE, AIR HOSE, QUICK-DISCONNECT |
| MIL-STD-1678-3 Revision C:2016 | FIBER OPTIC CABLING SYSTEMS REQUIREMENTS AND MEASUREMENTS - PART 3: PHYSICAL, MECHANICAL, ENVIRONMENTAL AND MATERIAL MEASUREMENTS (PART 3 OF 6 PARTS) |
| MIL-P-20385 Revision E:1982 | PROTRACTORS, SEMICIRCULAR, PLASTIC, GRADUATED IN MILS, YARDS, METERS AND INCHES |
| MIL-B-18670 Revision A:1976 | BOX, SMALL ARMS AMMUNITION, MARK 1 MOD 0 |
| MIL-STD-100 Revision G:1997 | ENGINEERING DRAWINGS |
| MIL-C-81093 Revision B:1984 | CARTRIDGES, EXPLOSIVE BOLT, (FOR TORPEDOES MARK 46 ALL MODS) |
| MIL-R-38435 Revision B:1968 | RECORDING SET, SIGNAL DATA A/A 24U-6 |
| MIL-P-85766 Base Document:1986 | PROJECTILE, 20 MILLIMETER , TARGET PRACTICE-TRACER, PGU-30/B |
| MIL-E-45782 Revision C:1993 | ELECTRICAL WIRING, PROCEDURES FOR |
| MIL-DTL-83296 Revision B:2009 | Fittings, Corrosion Resistant Steel, High Temperature, High Pressure (3000 PSI), Hydraulic and Pneumatic, General Specification for |
| MIL-C-83124 Base Document:1969 | CARTRIDGE ACTUATED DEVICES PROPELLANT ACTUATED DEVICES GENERAL DESIGN SPECIFICATION FOR |
| MIL T 38804 : B | TIME COMPLIANCE TECHNICAL ORDERS (TCTOS) PREPARATION OF |
| MIL-B-18966 Revision C:1984 | BLOCKING PLANT, CONCRETE |
| MIL T 38170 : F | TANK, MOBILE STORAGE, LIQUID OXYGEN TMU 27/M |
| MIL-DTL-25516 Revision F:2004 | CONNECTORS, ELECTRICAL, MINIATURE, COAXIAL, ENVIRONMENT RESISTANT TYPE, GENERAL SPECIFICATION FOR |
| MIL-T-52983 Revision G:1994 | TANK, FABRIC, COLLAPSIBLE, 3,000 10,000 20,000 AND 50,000 GALLON, FUEL |
| MIL-PRF-52343 Revision D:1998 | REPAIR KIT, HOSELINE |
| DSCC 11002 : 0 | PRINTED WIRING BOARD, FLEXIBLE, TYPE 2 (DOUBLE-SIDED) WITH PLATED THROUGH HOLES, WITH OR WITHOUT STIFFENER |
| MIL H 53063 : A | HOSE ASSEMBLY, ELASTOMER LIGHTWEIGHT NONCOLLAPSIBLE, FUEL |
| SAE AS 5604 : 2012 | COMPASS: MAGNETIC, PILOT'S STANDBY |
| MIL S 13623 : C | SWITCH, ROTARY, 28 VOLT DC |
| MIL-A-81918 Base Document:1976 | ADAPTER, LAUNCHER, AIRCRAFT, ADU-299A/A |
| MIL-DTL-83298 Revision C:2009 | Hose, Conductive Polytetrafluoroethylene Tube, High Temperature, High Pressure (3000 PSI), Hydraulicand Pneumatic |
| MIL-C-29025 Revision A:1978 | COMMUNICATIONS SYSTEMS FOR TRAINING DEVICES, GENERAL SPECIFICATION FOR |
| MIL-T-52964 Base Document:1979 | TOPOGRAPHIC SUPPORT SYSTEM OPERA STORAGE & RETRIEVAL, DISTRIBUTION DRAFTING SUPPORT, COMPILATION, SURVEY, RECTIFIER I & II MOSAICKING DRAFTING, COLLECTION, ANALYSIS, INFORMATION AND SYNTHESIS SECTIONS, SEMITRAILER MOUNTED |
| MIL-T-52497 Revision A:1972 | TRANSFORMER, POWER ISOLATION, SERIES CIRCUIT AIRPORT LIGHTING 6.6/6.6 AMPERES. |
| MIL-STD-877 Base Document:1968 | ANTENNA SUBSYSTEMS, AIRBORNE, CRITERIA FOR DESIGN AND LOCATION OF |
| MIL-A-26624 Revision B:1981 | AIR CONDITIONER, A/M32C-5, TRAILER MOUNTED, VAPOR CYCLE, ELECTRIC MOTOR DRIVEN |
| DOD-STD-35-37 Revision A:1978 | AUTOMATED ENGINEERING DOCUMENT PREPARATION SYSTEM INDUCTORS |
| DOD-STD-35-138 Base Document:1979 | AUTOMATED ENGINEERING DOCUMENT PREPARATION SYSTEM, SWITCHES, SENSITIVE |
| DOD-STD-35-25 Revision A:1979 | AUTOMATED ENGINEERING DOCUMENT PREPARATION SYSTEM, FILTERS, ELECTRONIC |
| MIL H 13253 : D | HANDSETS, GENERAL SPECIFICATION FOR |
| MIL-W-52161 Revision D:1989 | WELDING SET, ARC, INERT GAS, SHIELDED: CONSUMABLE WIRE ELECTRODE |
| MIL-C-0024196 Revision B:1991 | CLEANING SYSTEMS, ULTRASONIC |
| SAE ARP 5812 : 2017 | ACTUATORS, LINEAR MECHANICAL, GENERAL SPECIFICATION GUIDE |
| MIL-DTL-197 Revision M:2016 | PACKAGING OF BEARINGS, ASSOCIATED PARTS AND SUBASSEMBLIES |
| MIL-C-24196 Revision A:1988 | CLEANING SYSTEM, ULTRASONIC |
| MIL-STD-973 Base Document:1992 | CONFIGURATION MANAGEMENT |
| MIL F 24044 : 0 | FLANGE, COAXIAL LINE, RIGID AIR DIELECTRIC, GENERAL SPECIFICATION FOR |
| MIL-M-13231 Revision C:1988 | MARKING OF ELECTRONIC ITEMS |
| MIL-DTL-15024 Revision F:1997 | Plates and Tags for Identification of Equipment, General Specification for |
| MIL-R-8931 Revision A:1994 | RESERVOIRS, AIRCRAFT AND MISSILE, HYDRAULIC SEPARATED TYPE |
| W-B-411 Revision A:1961 | BLASTING MACHINE, GALVANOMETER, BLASTING, RESISTOR ASSEMBLY |
| MIL-M-25047 Revision C:1968 | MARKINGS AND EXTERIOR FINISH COLORS FOR AIRPLANES, AIRPLANE PARTS, AND MISSILES (BALLISTIC MISSILES EXCLUDED) |
| MIL S 0024623 : A | SPLICE, FIBER-OPTIC, SHIPBOARD, GENERAL SPECIFICATION FOR |
| MIL-P-10360 Revision G:1993 | PUMP, CENTRIFUGAL 4 INCH AND 6 INCH, GASOLINE ENGINE AND DIESEL ENGINE DRIVEN FOR WATER |
| MIL-D-83029 Revision A:1968 | DRIVE ASSEMBLY, CONSTANT SPEED, GENERAL SPECIFICATION FOR |
| MIL-T-14091 Revision E:1988 | TRIPOD, SURVEYING, EXTENSION-LEG-TYPE |
| MIL G 0043914 : E | GOGGLES, SUN, WIND AND DUST: 1974 |
| MIL-C-5778 Revision D:1992 | COVER, AIRCRAFT COMPONENTS, GENERAL REQUIREMENTS FOR |
| MIL-B-3753 Revision E:1986 | BUCKETS, CONCRETE, HAND-OPERATED, 3/4- TO 2- CUBIC YARD CAPACITY |
| MIL-PRF-12732 Revision F:2010 | HYPOCHLORINATION UNIT, WATER PURIFICATION, FRAME MOUNTED, AUTOMATICALLY CONTROLLED 2 TO 350 GPM FLOW |
| MIL P 45307 : B | PUMP, HYDRAULIC, AXIAL PISTONS, MANUAL, WITH FIRE-CONTROL SWITCH |
| MIL R 11767 : F | RELAY ASSEMBLY, GUN & FIRING, WATERPROOF, 24 VOLT DIRECT CURRENT |
| MIL R 83178 : A | REGULATOR, OXYGEN, DILUTER DEMAND, AUTOMATIC PRESSURE BREATHING, GENERAL SPECIFICATION FOR |
| MIL B 38608 : A | BOMB, FIRE, BLU-23/B |
| MIL-I-25091 Revision B:1985 | INDICATOR, CABIN AIR PRESSURE, PRESSURIZED AIRCRAFT, 1-7/8 INCH DIAL, TYPE MA-2 |
| MIL-P-5994 Revision D:1972 | PUMP, HYDRAULIC, ELECTRIC MOTOR DRIVEN, VARIABLE DELIVERY, GENERAL SPECIFICATION FOR |
| MIL-T-11674 Revision F:1982 | TRIPOD, SURVEYING, FOR RANGE POLE |
| MIL-A-47312 Revision A:1992 | ACTUATOR, HYDRAULIC |
| MIL C 6458 : C | CHAIN ASSEMBLY, SINGLE LEG, AIRCRAFT CARGO TIE DOWN |
| MIL-T-11776 Revision E:1988 | TABLE, LITHOGRAPHIC LAYOUT, TILT TOP, 24 INCH BY 30, INCH, NOMINAL ILLUMINATED AREA |
| MIL I 82356 : NOTICE 1 | INSTRUMENTS, SIMULATED, FOR AIRCRAFT TRAINING DEVICES; GENERAL SPECIFICATION FOR |
| MIL-C-53004 Revision B:1989 | CAMOUFLAGE SCREENING SYSTEMS, MODULAR, LIGHTWEIGHT, SYNTHETIC, WOODLAND, DESERT & SNOW |
| MIL-I-9443 Revision D:1972 | INDICATOR, TEMPERATURE THERMOCOUPLE, ENGINE EXHAUST, TYPE MJ-2 |
| MIL V 7899 : C | VALVE, CHECK, AIRCRAFT FUEL SYSTEM |
| MIL-T-25363 Revision D:1973 | TANK, PNEUMATIC PRESSURE, AIRCRAFT, GLASS FIBER |
| MIL-B-53083 Base Document:1988 | BAG, WATERPROOF, LOAD CARRYING; SPECIAL OPERATIONS WATERPROOF BAG (SOWB) |
| MIL-R-43003 Revision F:1994 | RELEASE, CARGO PARACHUTE, 5,000 POUND CAPACITY |
| MS51300 Revision F:2011 | CAP, FUEL TANK: COMBAT VEHICLES, SPILLPROOF |
| MIL G 26611 : D | GENERATOR, TACHOMETER GEU-7/A, MINIATURE |
| MIL-STD-1285 Revision D:2004 | MARKING OF ELECTRICAL AND ELECTRONIC PARTS |
| MIL-G-23337 Base Document:1962 | GAGE - PRESSURE, DIAL INDICATING |
| MIL-H-20194 Revision E:1989 | HELIOTROPE, SURVEYING, BOX TYPE, WITH CASE |
| MIL-R-43010 Revision B:1988 | REMOULDING SET, SOIL & COMPACTION |
| MIL-T-1205 Revision C:1961 | THERMOMETER, SELF INDICATING, LIQUID IN GLASS, AIR AND WATER, STANDARD |
| MIL-A-27195 Revision A:1989 | ACCELEROMETER, AIRCRAFT, MECHANICAL ABU-6/A |
| MIL-A-6589 Revision A:1968 | AMPLIFIER, ELECTRONIC CONTROL, SINGLE CHANNEL, TYPE A-2 |
| MIL-Y-87125 Revision A:1979 | YARN, GRAPHITE, 1000/3000 FILAMENTS |
| MIL-M-21039 Revision B:1979 | MAGNIFIER, MEASURING TUBE TYPE, SEVEN POWER AR-60( ) |
| MIL-P-514 Revision D:1966 | PLATE, IDENTIFICATION, INSTRUCTION AND MARKING BLANK |
| MIL-T-85230 Revision A:1992 | TARGET, TOW, AERIAL, TDU-34/A |
| MIL-R-81553 Revision B:1992 | REGULATOR, CHEST MOUNTED, OXYGEN, POSITIVE PRESSURE, CRU-79/P |
| MIL-B-2059 Revision D:1974 | BAG, WARDROBE: FOR PATIENTS CLOTHING |
| MIL-C-39004 Base Document:1964 | COUPLING ASSEMBLIES, QUICK-DISCONNECT, GENERAL PURPOSE, FOR SUBMINIATURE WAVEGUIDE FLANGES, GENERAL SPECIFICATION FOR |
| MIL-W-52875 Revision B:1983 | WATER QUALITY ANALYSIS SET: PREVENTIVE MEDICINE |
| MIL-B-23958 Revision A:1967 | BRUSH, CLEANING, AIRCRAFT, METAL BRIGHTENING |
| MIL-DTL-1298 Revision D Interim Revision:2007 | GUN, MACHINE; CALIBER .50, BROWNING, M2, HEAVY BARREL |
| MIL-A-2402 Revision D:1978 | ADAPTER, STEREOPLOTTER PROJECTOR, TILT, WITH CONDENSER CLIP (FOR MULTIPLEX) |
| MIL-D-52353 Revision A:1975 | DRIFTPIN, STEEL |
| DOD-B-63545 Base Document:1982 | BOLTS, RIBBED SHOULDER, WHEEL MOUNTING, METRIC GENERAL SPECIFICATION FOR |
| MIL G 62186 : 1988 | GENERATOR, ALTERNATING CURRENT (650 AMPERE RECTIFIED), 28 VOLTS DIRECT CURRENT (OIL COOLED) |
| MIL-A-83469 Base Document:1976 | ADJUSTER, LAP BELT, 1-3/4 INCH WEBBING |
| MIL H 12487 : B NOTICE 1 | HEADSET ELECTRICAL (HEADSETS ELECTRICAL H-16)(/U AND HEADSETS H-65)(/U |
| MIL-T-52820 Revision A:1979 | TABLE, DRAWING, STEEL |
| MIL-C-11020 Revision B:1966 | CHESTS AND CASES, METAL, GENERAL SPECIFICATION FOR |
| MIL-D-12195 Revision D:1984 | DRIER, PHOTOGRAPHIC FILM EL-4/U |
| GGG-W-643 Revision B:1963 | WRENCH, PIPE, INTERNAL-GRIPPING |
| MIL-DTL-25895 Revision A:2007 | ANTENNA AT-505/AP |
| MIL P 26517 : A | POWER SUPPLY, TRANSFORMER-RECTIFIER, AIRCRAFT, GENERAL SPECIFICATION FOR |
| MIL-M-87977 Base Document:1987 | MAINTENANCE PLATFORM, AIRCRAFT |
| MIL-A-23670 Revision A:1965 | ATTITUDE HEADING REFERENCE SYSTEM AN/ASN-50(*) |
| MIL-I-62521 Base Document:1987 | INSTALLATION , FLOOR-MAT, THERMAL-BARRIER |
| MIL-S-62742 Base Document:1992 | SWITCH, PRESSURE (METRIC) |
| NASA MSFC RQMT 1282 : 1989 | REQUIREMENTS FOR SURFACE PREPARATION AND APPLICATION OF DRY FILM LUBRICANTS |
| MIL-DTL-38195 Revision D:2000 | GENERATOR SET, GAS TURBINE ENGINE, 60 KW 400 HZ, GENERAL PURPOSE |
| MIL-C-38972 Base Document:1970 | CARTRIDGE, BOMB EJECTION CCU-9/B |
| MIL-B-26220 Revision D:1974 | BATTERIES, STORAGE, AIRCRAFT, NICKEL-CADMIUM GENERAL SPECIFICATION FOR |
| MIL-I-62520 Base Document:1987 | INSTALLATION, MOLDED, NOISE BARRIER |
| MIL-F-63051 Revision A:1985 | FUZE, M934 SERIES ACTUATORS FOR |
| MIL S 25057 : B | SCREEN SYSTEM, AIR INLET, AIRCRAFT TURBINE ENGINE, GENERAL SPECIFICATION FOR |
| MIL T 25446 : D | TRANSMITTER, TEMPERATURE, ELECTRICAL RESISTANCE |
| MIL-DTL-32361 Revision A:2011 | COMPOSITE LIGHT, TAIL STOP, TURN AND MARKER |
| MIL-DTL-32572 Base Document:2017 | Anchor Windlass, Electro-Mechanical, Vertical, Two-Speedand Variable-Speed |
| MIL-DTL-2211 Revision F:2008 | Table, Laundry, Folding, 3 by 8 Feet (No S/S Document) |
| MIL C 45918 : 0 | CLEVISES AND CONNECTORS (ROD END) |
| MIL-R-85895 Base Document:1988 | RACK, BOMB EJECTOR, AIRCRAFT BRU-32/A |
| MIL-DTL-83833 Revision B:2014 | 3000 GALLON AERIAL BULK FUEL DELIVERY SYSTEM BLADDER |
| MIL-I-5133 Revision C:1953 | INDICATOR, ATTITUDE TYPE J 8 |
| MIL-S-8512 Revision D:1974 | SUPPORT EQUIPMENT AERONAUTICAL, SPECIAL, GENERAL SPECIFICATION FOR THE DESIGN OF |
| MIL-C-5604 Revision B:1962 | COMPASS, MAGNETIC, PILOTS STANDBY |
| MIL-DTL-3702 Revision F:2012 | CABLE, POWER, ELECTRICAL: IGNITION, HIGH-TENSION |
| MIL-S-85377 Revision A:1983 | SWITCH, STEPPING, DIRECT CURRENT AIRCRAFT DISPENSER |
| MIL-T-26017 Revision C:1972 | TEST STAND, HYDRAULIC SYSTEM COMPONENTS, TYPE MK-3A (STAND, TEST, AIRCRAFT HYDRAULIC SYSTEM, ELECTRIC MOTOR DRIVEN, TYPE MK-3A) |
| MIL F 83860 : C | FILTER ELEMENTS, NONCLEANABLE, FLUID PRESSURE, HYDRAULIC LINE, 5 MICRON ABSOLUTE, TYPE II, SYSTEMS, GENERAL SPECIFICATION FOR |
| MIL-DTL-52872 Revision D:1998 | SENSOR GROUP, ULTRASONIC MOTION: TRANSCEIVER RT-1161/FSS-9(V) AND PROCESSOR MX-9444/FSS-9(V) |
| DOD-STD-35-8 Revision B:1979 | AUTOMATED ENGINEERING DOCUMENT PREPARATION SYSTEM RELAYS |
| MIL F 46736 : A | FILTER ELEMENT, INTAKE AIR CLEANER, DRY TYPE |
| MIL-R-25170 Revision B:1983 | RELEASE, AUTOMATIC, AIRCRAFT SAFETY, LAP BELT |
| DOD-STD-35-36 Revision B:1979 | AUTOMATED ENGINEERING DOCUMENT PREPARATION SYSTEM SEALS, GASKETS AND PACKING |
| SAE ARP 4058 : 2017 | GENERAL SPECIFICATION GUIDE FOR MECHANICAL GEARED ROTARY ACTUATORS |
| MIL-S-87233 Base Document:1985 | SUPPORT EQUIPMENT SYSTEMS (REQUEST FOR ISSUE OTHER THAN DOD MUST BE SENT VIA; ASD/ENES WRIGHT PATTERSON AFB OH 45433-6503 |
| MIL-DTL-83833 Revision C:2017 | 3000 GALLON AERIAL BULK FUEL DELIVERY SYSTEM BLADDER |
| MIL-D-52840 Base Document:1975 | DETECTOR, BATCH INTERFACE |
| MIL-B-45857 Revision C:1985 | BORING MACHINE, CAM AND MAIN BEARINGS (STATIONARY) |
| MIL-A-27471 Revision C:1993 | ADAPTER, PRESSURE-REDUCER, IN-LINE CRU-43A/A |
| ASTM F 2162 : 2001 : R2016 | Standard Specification for Bearing, Roller, Needle: Drawn Outer Ring, Full Complement, Without Inner Ring, Open and Closed End, Standard Type |
| MIL-T-21578 Revision A:1966 | TEST EQUIPMENT, HAZARDOUS LOCATION, INSTALLED, BASIC REQUIREMENTS FOR |
| MIL-C-83821 Base Document:1990 | CRANE, WHEEL MOUNTED, CRASH, ROUGH TERRAIN, HYDRAULIC FULL REVOLVING, 4X4, DED, FIGHTER TYPE AIRCRAFT |
| MIL-C-85019 Base Document:1976 | COMPUTER, AIR NAVIGATION, TRUE AIRSPEED, MACH NUMBER, WIND COMPONENTS SUPERSONIC, TYPE MB-9 |
| MIL-F-14614 Revision D:1979 | FRAME AND TABLE ASSEMBLY, STEREOPLOTTER, PROJECTION, MULTIPLEX, 32-INCH LENGTH WITH CHEST |
| MIL-I-23870 Base Document:1963 | INDICATOR, FUEL RATE OF FLOW, 0 TO 15 GPM |
| MIL-DTL-3976 Revision F:2013 | Lights, Marker, Clearance (Service and Blackout) General Specification for |
| MIL-I-82826 Base Document:1985 | IGNITER ASSEMBLY |
| MIL-C-9082 Revision H:1986 | CONVERTER, OXYGEN, AIRCRAFT, LIQUID TO GASEOUS, GENERAL SPECIFICATION FOR |
| MIL-B-29159 Revision A:1989 | BOAT SYSTEM, UTILITY, NOMINAL, 20-FOOT REINFORCED PLASTIC WITH 100-HORSEPOWER OUTBOARD ENGINE AND TRAILER |
| MIL I 7077 : B | INDICATOR, TEMPERATURE ELECTRICAL RESISTANCE, MULTIFUNCTION -70 DEG TO PLUS 150 DEG. C 2 INCH SIZE |
| MIL-S-6150 Revision D:1987 | STARTER, ENGINE, ELECTRICAL, DIRECT CRANKING, AIRCRAFT 28 VOLT DC |
| MIL-B-12570 Revision D:1977 | BAKERY OVEN, TRAILER MOUNTED, M-533 |
| MIL-DTL-83521 Revision B:2003 | MAINTENANCE KITS, ELECTRICAL CONNECTORS, GENERAL SPECIFICATION FOR |
| MIL-P-83927 Revision B:1981 | POWER SUPPLIES, GUIDED MISSILE LAUNCHERS, SINGLE TYPES PP-2401B/A PP-2401C/A PP-2401D/A, PP-4285/A, PP-4286/A, AND COMPOSITE TYPE PP-4506/A AND PS-1037 |
| MIL-A-85652 Base Document:1984 | AMPLIFIER-MIXER AM-7157/DKT-59 |
| MIL-C-10065 Revision B:1966 | CABLE, SPECIAL PURPOSE, ELECTRICAL, (MULTIPAIR, AUDIO FREQUENCY) |
| MIL-DTL-32464 Revision A:2017 | FITTINGS, ADAPTER, HYDRAULIC AND PNEUMATIC, 37 DEGREES SPHERICAL TO ANPT CONNECTORS, 1500 TO 3000 PSI, GENERAL SPECIFICATION FOR |
| MIL-S-83427 Base Document:1974 | SURVIVAL KIT CONTAINERS, CNU-129(V)/P AND CNU-130/P |
| MIL-HDBK-2097 Revision A:1997 | ACQUISITION OF SUPPORT EQUIPMENT AND ASSOCIATED INTEGRATED LOGISTICS SUPPORT |
| MIL R 19648 : C | RELAY, TIME DELAY, THERMAL GENERAL SPECIFICATION FOR |
| MIL C 38271 : B | CONNECTOR, OXYGEN MASK TO REGULATOR CRU-60/P |
| MIL-F-24666 Base Document:1986 | FILTER ELEMENT, SHIP FUEL SYSTEM PREFILTER, NONCLEANABLE, HIGH EFFICIENCY |
| MIL-H-11511 Revision G:1980 | HEATER, SPACE, MULTIFUEL, WITH BLOWER 60,000 BTU/HR |
| MIL-A-85648 Base Document:1983 | AMPLIFIER, TRAVELING WAVE TUBE |
| MIL-D-24 Revision C:1984 | DYNAMOTOR, GENERAL SPECIFICATION FOR |
| SAE AS 6174 : 2014 | COUNTERFEIT MATERIEL - ASSURING ACQUISITION OF AUTHENTIC AND CONFORMING MATERIEL |
| MIL-STD-2131 Revision A:1991 | LAUNCHER, EJECTION GUIDED MISSILE, AIRCRAFT, GENERAL DESIGN CRITERIA FOR |
| MIL-PRF-32278 Revision B:2008 | GAUGE, TACTICAL AUTOMATED TANK (TATG) - FUELS OPERATIONAL READINESS CAPABILITY EQUIPMENT (FORCE) |
| SAE AS 1895 : 2016 | COUPLING ASSEMBLY, V-RETAINER, HIGH PRESSURE, HIGH TEMPERATURE, PNEUMATIC TUBE |
| MIL L 58085 : A | LIGHT, BEACON, ANTI COLLISION AIRCRAFT |
| MIL-S-5594 Revision B:1971 | SWITCH, TOGGLE, ELECTRICALLY HELD SEALED GENERAL SPECIFICATION FOR |
| MIL-C-81790 Revision A:1990 | CONNECTORS, RECEPTACLE, EXTERNAL ELECTRIC POWER, AIRCRAFT, GENERAL SPECIFICATION FOR |
| MIL-B-53102 Base Document:1990 | BERM LINER ASSEMBLIES, ARCTIC SERVICE |
| MIL-DTL-55116-11 Revision B:2004 | Connector, Receptacle, Five Pin Audio, Crimp Sleeve Spring Terminals, Wire Strain Relief, U-228 Type |
| MIL L 18494 : D | LIFE RAFT, INFLATABLE, LRU-14/A |
| WW-C-633 Revision D:1980 | COUPLING HALVES, CAP AND WYE; QUICK DISCONNECT PNEUMATIC HOSE, TWO-LUG UNIVERSAL TYPE |
| MIL-A-45130 Revision A:1959 | AMPLIFIER, ELECTRONIC CONTROL, AM-1057/MS |
| MIL-DTL-16034 Revision B:2008 | METERS, ELECTRICAL-INDICATING (SWITCHBOARD AND PORTABLE TYPES), GENERAL SPECIFICATION FOR |
| MIL-P-8564 Revision D:1970 | PNEUMATIC SYSTEM COMPONENTS, AERONAUTICAL, GENERAL SPECIFICATION FOR [ASG] |
| MIL-S-52377 Revision D:1990 | SHOP EQUIPMENT, ELECTRONIC REPAIR, SEMI TRAILER MOUNTED |
| MIL-DTL-32371 Base Document:2012 | Fittings, Adapter, Hydraulic and Pneumatic, Spherical to ORFS Connectors, 1500 to 3000 PSI, General Specification for |
| MIL B 8075 : D | BRAKE CONTROL SYSTEMS, ANTI SKID, AIRCRAFT WHEELS, INSTRUCTIONS FOR PREPARATION OF |
| MIL-M-85831 Base Document:1989 | MASK, HELICOPTER AIRCREWMAN, CHEMICAL, BIOLOGICAL, RADIOLOGICAL PROTECTIVE, NON-OXYGEN |
| MIL-DTL-13625-2 Revision C:2017 | SWITCHES, PULL; SWITCHES, PUSH; SWITCHES, BEAM SELECTING, HEADLIGHT: ELECTRICAL (28 VOLTS DC MAXIMUM, FOR MILITARY VEHICLES) |
| MIL L 25547 : B | LOUDSPEAKER, PERMANENT MAGNET LS-211/AIC-13 |
| MIL B 18367 : 0 | BEARINGS, ROLLER, CYLINDRICAL, RADIAL AND THRUST, SPECIAL PRECISION |
| MIL-DTL-9479 Revision E:1999 | |
| MIL-M-11726 Revision E:1982 | MANIFOLD, AIR LINE, ONE TO SEVEN OUTLETS |
| MIL-PRF-51028 Revision D:2017 | SAMPLING AND GAGING KIT |
| MIL-C-4150 Revision J:1989 | CASE, TRANSIT AND STORAGE, WATERPROOF AND WATER-VAPORPROOF |
| DOD-STD-35-137 Base Document:1978 | AUTOMATED ENGINEERING DOCUMENT PREPARATION SYSTEM, SWITCHES, ILLUMINATED |
| MIL-G-25871 Revision B:1978 | GLASS, LAMINATED, AIRCRAFT GLAZING |
| MIL-L-52366 Revision C:1984 | LOAD BANK, AC 0-33KW RESISTIVE |
| MIL I 38715 : B | INDICATOR, COMBUSTIBLE GAS AND TOXIC GAS |
| MIL-B-82564 Base Document:1968 | BISTABLE MULTIVIBRATOR ASSEMBLY LD546989 (FOR GUIDANCE CONTROL TEST SET MK 443 MOD O AND MOD 1) |
| MIL-H-13109 Revision A:1966 | HEADSET, ELECTRICAL, GENERAL SPECIFICATION FOR |
| MIL-B-50432 Base Document:1969 | BAG, BARRIER, NEOPRENE, FOR USE WITH 152MM CARTRIDGES |
| MIL R 46963 : A | ROCKET MOTOR, M42A1, BOOSTER |
| MIL-S-83129 Revision A:1972 | SPECTROMETER, FLUID ANALYSIS A/E35U-3 |
| MIL-DTL-32309 Base Document:2009 | Rifle, 5.56 Millimeter: M16A4 |
| MIL-DTL-25469 Revision J:2014 | VALVES, FILLER, LIQUID OXYGEN, AIRCRAFT TYPE |
| MIL-C-38373 Revision B:1975 | CAP, FLUID TANK FILLER |
| MIL G 24197 : NOTICE 2 | GENERATOR SET, DIESEL ENGINE 25O KW, ALTERNATING CURRENT |
| MIL-B-16747 Revision C:1963 | Boiler, Steam, High Pressure, Water Tube Type, Auxiliary-Navy Shipboard (No S/S Document) |
| MIL I 5356 : A | INDICATOR AIRSPEED, PITOT STATIC TYPE L 7 |
| MIL-C-52037 Revision F:1990 | COMPRESSOR UNIT, RECIPROCATING, POWER DRIVEN, AIR, 15 CFM 3,500 PSI |
| MIL P 15024 : E | PLATES, TAGS AND BANDS FOR IDENTIFICATION OF EQUIPMENT |
| MIL-T-53055 Revision C:1991 | TANK, 3,000 GALLON & 4600 GALLON FABRIC, COLLAPSIBLE, DRINKING WATER, SEMI-TRAILER MOUNTED |
| SAE AS 6479 : 2014 | SPLICER, FUSION, FIBER OPTIC, AEROSPACE |
| MIL-M-16125 Revision C:1963 | METERS, ELECTRICAL, FREQUENCY |
| MIL S 12109 : C | SOLENOID, ELECTRICAL, CLASS 2 (MACHINE GUN) |
| MIL S 83352 : B | SIGNAL KIT, PERSONNEL, DISTRESS, A/P25S-5A |
| SAE AS 4623 : 2016 | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, PARA-ARAMID REINFORCED, 3,000 PSI, 275 DEGREES F, HEAVY DUTY, AIRCRAFT HYDRAULIC SYSTEMS |
| MIL-B-45022 Revision F:1992 | BLAST CLEANING CABINETS |
| SAE AS 55941 : 2013 | SWITCHES, TOGGLE, ELECTRICALLY HELD, SEALED, GENERAL SPECIFICATION FOR |
| MIL C 4928 : A | CHARGER, BATTERY, SILICON DIODE, TYPE A-1 |
| MIL C 15370 : F | COUPLERS, DIRECTIONAL GENERAL SPECIFICATION FOR |
| MIL-DTL-85110 Revision B:1997 | BAR, REPEATABLE RELEASE HOLDBACK (RRHB), AIRCRAFT LAUNCHING, GENERAL REQUIREMENT FOR |
| GGG-B-376 Revision B:1963 | BIT, SCREW-DRIVER, (TAPERED SQUARE SHANK, FLAT TIP AND CROSS TIP) |
| SAE AS 5466 : 2012 | AEROSPACE - GENERAL REQUIREMENTS FOR HYDRAULIC FUSE - QUANTITY MEASURING |
| SAE AS 620 : 2012 | HOSE ASSEMBLIES, CONVOLUTED POLYTETRAFLUOROETHYLENE METALLIC REINFORCED, HIGH TEMPERATURE, MEDIUM PRESSURE, AIRCRAFT |
| SAE AS 39901 : 2012 | BEARINGS, ROLLER, NEEDLE, AIRFRAME, ANTIFRICTION, INCH |
| SAE ARP 4945 : 2013 | AEROSPACE-SOLENOID VALVE, HYDRAULIC, THREE WAY, TWO POSITION, DIRECT ACTING |
| AEDP-6 : 2014 | NATO ADVANCED DATA STORAGE INTERFACE REQUIREMENTS AND IMPLEMENTATION GUIDE |
| SAE AS 4157 : 2017 | COUPLING ASSEMBLIES, HYDRAULIC, SELF-SEALING, QUICK DISCONNECT, 8000 POUNDS PER SQUARE INCH, GAGE |
| SAE AS 25427 : 2015 | COUPLING ASSEMBLY, HYDRAULIC, SELF-SEALING, QUICK DISCONNECT |
| SAE AS 81099 : 2017 | ELECTRIC DEVICES, SIMPLE, GENERAL SPECIFICATION FOR |
| SAE AS 8700 : 1999 | INSTALLATION AND TEST OF ELECTRONIC EQUIPMENT IN AIRCRAFT, GENERAL SPECIFICATION FOR |
| ASTM F 1347 : 1991 : R2001 | Standard Specification for Manually Operated Fueling Hose Reels |
| ASTM F 2430 : 2004 : R2018 | Standard Specification for Bearing, Roller, Needle: Assembly (Thick Outer Race) |
| SAE AS 614 : 2017 | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, METALLIC REINFORCED, 4000 PSI, 400 DEGREES F, HEAVY DUTY, HYDRAULIC AND PNEUMATIC |
| ASTM F 1347 : 1991 : R2006 | Standard Specification for Manually Operated Fueling Hose Reels |
| MS90908 Revision C:2011 | FILLER TUBE, FUEL TANK - MILITARY VEHICLES |
| MIL-DTL-6129 Revision B:2014 | VALVE, CHECK; VACUUM AND PRESSURE SYSTEM |
| MIL-G-18997 Revision E:1991 | GAUGE, PRESSURE, DIAL INDICATING |
| MIL-DTL-85061 Revision C:2009 | COUPLING, FUEL LINE, FLEXIBLE, 125 PSI |
| MIL-HDBK-115 Revision C:2016 | U.S. ARMY REVERSE ENGINEERING HANDBOOK (GUIDELINES AND PROCEDURES) |
| MIL-T-9720 Revision F:1984 | Truck, Lift, Aerial Stores, 3000 Pounds Capacity MJ-1A and MJ-1B |
| MIL C 83867 : B | CONNECTOR, OXYGEN MASK HOSE NON-EJECTION TYPE |
| MIL-L-9131 Revision H:1983 | LIFE RAFTS, INFLATABLE, TWENTY MAN |
| MIL-F-2763 Revision B:1966 | FILTER, LIGHT, OPTICAL INSTRUMENT, BINOCULAR |
| MIL-L-38200 Revision B:1966 | LIFE PRESERVER, UNDERARM, ADULT LPU 5/P |
| MIL-PRF-81975 Revision C:2008 | COUPLINGS, REGULATED, AERIAL PRESSURE REFUELING TYPE MA-2, TYPE MA-3 AND TYPE MA-4 |
| MIL-R-85880 Base Document:1988 | ROCKET, JET ASSISTED TAKE OFF (JATO) PROPULSION SYSTEM, GENERAL DEVELOPMENT SPECIFICATION FOR |
| MIL F 3922 : B | FLANGE, WAVEGUIDE, GENERAL PURPOSE GENERAL SPECIFICATION FOR |
| MIL-DTL-7601 Revision C:2011 | GAGE, EMERGENCY OXYGEN, TYPE L-2 |
| MIL-B-52690 Revision B:1987 | BRACKET PUSHING, BOW ATTACHMENT, 12-TON PNEUMATIC HALF FLOAT |
| MIL-H-38360 Revision B:1966 | HOSE, ASSEMBLIES, TETRAFLUOROETHYLENE, HIGH-TEMPERATURE, HIGH PRESSURE, 3000 PSI HYDRAULIC AND PNEUMATIC |
| MIL-S-6330 Revision H:1965 | SURVIVAL KIT, LIFE RAFT |
| MIL-S-45005 Revision C:0198 | SEAL, PLAIN, AND SEAL, PLAIN, ENCASED, FLUID, RADIAL, SINGLE AND MULTIPLE LIP SEAL |
| MIL-M-9397 Revision E:1979 | FREQUENCY CONVERTER, MOBILE, TYPE MC-1A |
| MIL I 25689 : A NOTICE 1 | INDICATOR, ELECTRICAL TACHOMETER |
| MIL S 6807 : D | SWITCHES, ROTARY, SELECTOR POWER - GENERAL SPECIFICATION FOR |
| MIL-DTL-62420 Revision B:1998 | PERISCOPE, TANK |
| GGG-B-121 Revision B:1964 | BAR, SINE; PLATE SINE (AND FIXTURES) |
| L-C-530 Revision C:1987 | COATING, PIPE, THERMOPLASTIC RESIN |
| MIL H 3586 : E | HOLDFAST ASSEMBLY CHAIN TYPE |
| MIL-A-46330 Base Document:1962 | AMPLIFIER, VIDEO: AM&1075 A/M |
| AA-F-355 Revision B Interim Revision:1972 | FILING CABINET STEEL, LEGAL AND LETTER SIZE, INSULATED |
| MIL-E-87236 Base Document:1985 | |
| MIL-DTL-87255 Revision A:2008 | VALVES, PRESSURE, ANTI-G SUIT, HIGH FLOW |
| MIL R 14293 : A | RESISTOR, FIXED, HIGH MEGOHM (HERMETICALLY SEALED) |
| MIL-DTL-13791-20 Revision A:2016 | IGNITION DISTRIBUTOR COIL, INTERNAL BALLAST |
| MIL-T-25193 Revision B:1961 | TRANSMITTER, REMOTE COMPASS, TYPE C-2 (UNSTABILIZED) |
| GGG W 631 : B INT AMD (5) | WRENCH ADJUSTABLE OPEN END AUTO AND MONKEY |
| ASTM F 1166 : 2007 : R2013 | Standard Practice for Human Engineering Design for Marine Systems, Equipment, and Facilities |
| MIL-A-85116 Base Document:1980 | ACTUATOR, PISTON, MINIATURE |
| MIL-I-5418 Revision B:1963 | INDICATOR: AIRSPEED, PITOT STATIC, SENSITIVE, 50-650 KNOTS |
| MIL-PRF-12386 Revision F:2011 | CLAMP, REPAIR, PIPE: WITH FUEL-RESISTANT GASKET |
| MIL-S-8812 Revision D:1975 | STEERING SYSTEM, AIRCRAFT GENERAL REQUIREMENTS FOR |
| MIL-S-52098 Revision C:1992 | STIFFENER ASSEMBLY, BALK CONNECTING |
| MIL-P-52539 Revision B:1984 | PIPELINE WELD SET TESTING |
| MIL-L-25798 Revision D:1984 | LIFE PRESERVER, UNDERARM, CASUALTY, TYPE MB-1 |
| MIL-S-8710 Revision B:1969 | STRAINER, AIRFRAME FUEL SYSTEM, GENERAL SPECIFICATION FOR |
| MIL-E-87235 Base Document:1985 | EMERGENCY ESCAPE, AIRCRAFT (REQUEST FOR ISSUE MUST BE SENT VIA ASD/ENES, WRIGHT-PATTERSON AFB OH 45433-6503 |
| MIL-B-3493 Revision D:1985 | BUCKLES, END BAR WITH TONGUE (FOR LEATHER) |
| MIL-S-81551 Base Document:1968 | SWITCH, TOGGLE, HERMETICALLY SEALED, GENERAL SPECIFICATION FOR |
| MIL-DTL-52876 Revision D:1997 | CABINETS, MONITOR, CY-7359/FSS-9(V) CY-7360/FSS-9(V), AND CY-7361/FSS-9(V) |
| SAE AS 50571 B : 2016 | LIGHTS, INSTRUMENT, INDIVIDUAL, GENERAL SPECIFICATION FOR |
| MIL-M-7997 Revision C:1981 | MOTOR, AIRCRAFT HYDRAULIC, CONSTANT DISPLACEMENT GENERAL SPECIFICATION FOR |
| MIL-H-18911 Revision A:1974 | HEAD AND MOTOR, ROCKET, INERT PARTS, PAINTING AND MARKING |
| MIL-K-8662 Revision E:1974 | KNIFE, HUNTING, SHEATHED, SURVIVAL PILOT S |
| FF-C-450 Revision G:2017 | CLAMPS, WIRE ROPE |
| MIL-S-62502 Base Document:1987 | SPECIFICATION FOR SHEET MOLDING COMPOUND; LOW SHRINKAGE |
| MIL-T-12625 Revision D:1981 | THERMOMETER, SELF-INDICATING, LIQUID IN GLASS, POCKET TYPE |
| MIL-S-48303 Base Document:1973 | SWITCH ASSEMBLY. M167 |
| SAE EIA 649/1 : 2014 | CONFIGURATION MANAGEMENT REQUIREMENTS FOR DEFENSE CONTRACTS |
| MIL P 10562 : D | PROJECTOR, STEREOPLOTTER, WIDE-ANGLE, VERTICAL MULTIPLEX MAPPING EQUIPMENT [SET OF THREE PROJECTORS IN A CASE WITH ACCESSORIES] |
| MIL-L-3851 Revision E:1991 | LOOP, SLIDE [FOR EQUIPAGE] |
| MIL-P-21960 Revision B:1967 | PAINTING AND MARKING; WARHEADS, GUIDED MISSILE |
| ASTM F 2163 : 2001 | Standard Specification for Ring, Bearing, Inner: for Needle Roller Bearing With Drawn Outer Ring |
| MIL-PRF-55339 Revision C:2005 | Adapters, Connectors, Coaxial, Radio Frequency, (Between Series and within Series), General Specification for |
| NASM 23460 : 2004 | PIN, QUICK-RELEASE, SELF-RETAINING, POSITIVE-LOCKING |
| MIL F 10538 : E NOTICE 1 | FRAMES, STEREOPLOTTER PROJECTION MULTIPLEX [SINGLE AND DOUBLE] WITH CASE |
| MIL-S-83576 Base Document:1974 | SOLAR CELL ARRAYS, SPACE VEHICLE, DESIGN AND TESTING, GENERAL SPECIFICATION FOR |
| DSCC 85122 : G | INDICATOR ASSEMBLIES: RED, YELLOW, GREEN; PLAIN AND FILTERED LENSES; PANEL-SEALED, AND PANEL AND REAR SEALED |
| MIL-DTL-7034 Revision F:2005 | PULLEYS, GROOVE, ANTIFRICTION BEARING, GREASE LUBRICATED, AIRCRAFT, GENERAL SPECIFICATION FOR |
| MIL-S-85510 Base Document:1981 | |
| MIL-R-5001 Revision B:1992 | RUBBER CELLULAR SHEET, MOLDED AND HAND BUILT SHAPES, LATEX FOAM |
| MIL-DTL-7899 Revision D:2014 | VALVES, CHECK, AIRCRAFT FUEL SYSTEM |
| MIL-S-7852 Revision B:1968 | SEAT, AIRCREW, ADJUSTABLE SWIVEL TYPE E-1 |
| MIL-B-26793 Revision B:1958 | BLOWER, GASOLINE ENGINE DRIVEN, TYPE A-1 |
| MIL-A-6425 Revision B:1959 | ADAPTOR, PRESSURE FUEL SERVICING, AIRCRAFT, GENERAL SPECIFICATION FOR |
| MIL-A-26107 Revision D:1960 | AIR CONDITIONER, TRAILER-MOUNTED, FREON CYCLE, 11-1/2 TON REFRIGERATING CAPACITY, TYPE MA-3 |
| MIL-DTL-6193 Revision E:2017 | JOINTS, UNIVERSAL, PLAIN, LIGHT AND HEAVY DUTY, GENERAL SPECIFICATION FOR |
| MIL-D-16153 Revision G:1991 | DETECTOR, RADIAC, DT 60/PD |
| MIL-T-22030 Base Document:1959 | TRANSMITTER, RATE OF FLOW, FUEL; TRU 26/A (300 TO 10,000 PPH) |
| MIL-C-38404 Revision E:1992 | COUPLING, HOSE, REATTACHABLE SCREW-ON |
| MIL-A-38331 Base Document:1964 | AMPLIFIER-POWER SUPPLY AM-4080/ASN-55, LEVELLING |
| MIL-DTL-55116-4 Revision B:2004 | Connector, Plug, Six Pin Audio, Solder Cup Terminals, Wire Strain Relief, U-229 Type |
| MIL-C-81582 Revision B:1975 | CONNECTOR, ELECTRICAL, BAYONET COUPLING, ENVIRONMENTAL RESISTING, UMBILICAL, GENERAL SPECIFICATION FOR |
| MIL-DTL-55116-7 Revision B:2004 | Connector, Plug, Five Pin Audio, Solder Cup Terminals, Molded Strain Relief, U-182 Type |
| MIL-P-62341 Revision A:1986 | PRINTED CIRCUIT CARD, M1 & M1A1 TANK, GENERAL SPECIFICATION FOR |
| MIL-C-0043584 Revision C:1985 | COUNTER, CHECKOUT, CONVEYOR |
| GGG-N-398 Revision A:1963 | NUT RUNNER, PNEUMATIC, PORTABLE |
| MIL-M-62515 Base Document:1985 | MAINTENANCE REPAIR KIT, ELECTRICAL, FOR M901A1 AND M981 WEAPONS SYSTEMS |
| MIL-B-50873 Revision A:1971 | BAG, BARRIER, ELASTOMERIC |
| GGG-M-45 Revision D:1974 | MACHETES, RIGID HANDLE |
| SAE AS 22520 : 2011 | CRIMPING TOOLS, WIRE TERMINATION, GENERAL SPECIFICATION FOR |
| MIL V 12126 : E | VALVE, GATE, BRONZE, LEVER OPERATED, QUICK OPENING, 125 PSI AND 150 PSI |
| MIL-S-17243 Revision D:1981 | STONE, COMMUTATOR SURFACING |
| F-T-2907 Revision A:2006 | TANKS, POTABLE HOT WATER STORAGE |
| MIL-T-52991 Revision A:1992 | TABLE, SCRIBING, TRACING, DRAFTING, FLIP TOP |
| MIL-I-25852 Revision B:1981 | INDICATOR, TEMPERATURE, THERMO COUPLE EHU-4/A |
| MIL-I-27273 Revision A:1965 | INVERTER, POWER, STATIC, GENERAL SPECIFICATION FOR |
| MIL A 25895 : 0 | ANTENNA AT-505/AP |
| MIL-M-27274 Revision E:1993 | MASK, OXYGEN MBU-5/P |
| MIL B 82640 : 0 | BOOT ASSEMBLY, TOXIC, INFECTIOUS, OR VESICANT SUBSTANCES, PROTECTIVE |
| MIL-I-9343 Revision C:1985 | INDICATOR, TEMPERATURE, THERMOCOUPLE, ENGINE EXHAUST, TYPE MJ 1 |
| MIL-G-8798 Base Document:1956 | GAGE SYSTEM, FUEL QUANTITY, CAPACITOR TYPE NONVACUUM TUBE, INTEGRALLY LIGHTED GENERAL SPECIFICATION FOR |
| MIL-I-21203 Revision A:1962 | INDICATOR, ATTITUDE, SPHERICAL, DIRECT READING, FAST ERECTING, ELECTRIC GYRO |
| MIL V 8057 : F | VALVE, OXYGEN, PRESSURE BUILDUP AND VENT |
| MIL-B-87983 Base Document:1988 | BAR, PRY, WHEELED TYPE, HAND OPERATED, MA-1, COMMERCIAL |
| SAE AS 4073 : 2013(R2018) | AIR CYCLE AIR CONDITIONING SYSTEMS FOR MILITARY AIR VEHICLES |
| MIL-G-22169 Base Document:1959 | GYRO, VERTICAL AND MOUNT |
| MIL-DTL-7560 Revision D:1997 | VALVE ASSEMBLY, OXYGEN CYLINDER, BAILOUT |
| MIL-M-7405 Revision D:1986 | MAINTENANCE PLATFORM, AIRCRAFT, TYPE B-5A |
| MIL-A-81083 Revision C:1970 | Alternator Rectifier (For Torpedo MK 46 Mods O, 1, 2, and 4) |
| MIL D 22612 : C | DETECTOR, CONTAMINATED FUEL |
| MIL-DTL-8348 Revision K:2008 | Gage Assemblies, Air Pressure, Dial Indicating Chuck Type, Self-Contained |
| MIL-A-19940 Base Document:1957 | AMPLIFIER, CONTROL SINGLE CHANNEL, S-2 COMPASS |
| MIL-DTL-27166 Revision F:2013 | VALVE, PRESSURE EQUALIZING, GASEOUS PRODUCTS |
| MIL-T-85703 Base Document:1984 | TOOL, POWER DRIVE TLU 437/E |
| MIL-B-24220 Revision A:1990 | BLOCKS, TACKLE, SYNTHETIC ROPE |
| DI-MGMT-81804 Revision A:2013 | ITEM UNIQUE IDENTIFICATION (IUID) MARKING ACTIVITY, VALIDATION AND VERIFICATION REPORT |
| NASA MSFC STD 3394 : 2005 | STANDARD FOR CONTRACTOR CONFIGURATION MANAGEMENT FOR MSFC PROGRAMS/PROJECTS |
| MIL-G-80236 Base Document:1972 | GENERATOR, AMMONIA DISSOCIATED ATMOSPHERE |
| MIL-PRF-32379 Base Document:2011 | SHIELD, BALLISTIC - SHIPBOARD CREW-SERVED WEAPON STATION |
| MIL-PRF-32479 Revision A:2017 | TRAILERS, LIFT - AIRCRAFT AND MISSILE ENGINE |
| SAE AS 1969 : 2013 | COUPLING ASSEMBLY, SELF-HEALING, QUICK DISCONNECT FUEL AND OIL SYSTEM COMPONENTS |
| MIL-PRF-85725 Revision A:1998 | RACK, INTEGRATED AVIONICS, FORCED AIR COOLED, GENERAL SPECIFICATION FOR |
| MIL-DTL-14465 Revision F:2010 | LIGHTS, COMPOSITE, 24 VOLTS DIRECT CURRENT (NOMINAL) VEHICULAR |
| MIL-C-18053 Revision A:1958 | CONTROL AMPLIFIER, ALTITUDE (P-1 AUTOMATIC PILOT RADAR SET, AN/APN-22) |
| MIL-DTL-32373 Base Document:2011 | Plug, Machine Thread, Magnetic: Drain |
| MIL-I-25325 Revision A:1961 | Indicator, Rate of Flow, Fuel, Totalizing, 0-100,000 PPH, Type MA-8 |
| MIL-F-85731 Base Document:1986 | FASTENER, POSITIVE LOCKING, ELECTRONIC EQUIPMENT GENERAL SPECIFICATION FOR |
| MIL P 47160 : 0 | PAINT, OPTICAL, BLACK |
| MIL T 0053055 : B | TANK, 3000 GALLON & 4600 GALLON FABRIC, COLLAPSIBLE, DRINKING WATER, SEMI-TRAILER MOUNTED |
| MIL-A-7237 Revision B:1975 | AIR INDUCTION SYSTEM, RECIPROCATING ENGINE, GENERAL SPECIFICATION FOR |
| MIL-W-81560 Base Document:1967 | WEAPON, BIOLOGICAL AND CHEMICAL GENERAL DESIGN SPECIFICATION FOR |
| MIL T 5350 : E | TRANSMITTER, SYNCHRO OPERATED, AIRCRAFT, GENERAL SPECIFICATION FOR |
| MIL-M-85522 Revision A:1991 | MONITOR, OXYGEN CRU-91/A |
| MIL-S-9487 Revision C:1985 | SWITCH, TRIGGER, SINGLE POLE, TWO STAGE, MOMENTARY |
| MIL V 87223 : 0 | VALVE, PRESSURE, ANTI-G SUIT, MXU-804/A AND MXU-805/A |
| MIL-DTL-6807 Revision F:2012 | Switches, Rotary, Selector Power, General Specification for |
| MIL-F-85596 Base Document:1983 | FIN, RETARDER, AIR INFLATABLE BSU-85/B |
| MIL S 82068 : C | SPRAYERS, PESTICIDE; TRAILER-MOUNTED, GASOLINE-ENGINE-DRIVEN |
| MIL-DTL-25971 Revision D:2015 | LIGHT, AIRPORT TRAFFIC CONTROL, SDU-4/U |
| MIL-B-45993 Revision A:1989 | BEAD BREAKER, PNEUMATIC TIRE, PORTABLE AIR OR AIR OVER HYDRAULIC OPERATED |
| MIL-R-19750 Revision A:1958 | REGULATOR; VOLTAGE, 28 V, 120 DEGREE C, FOR 30 V DIRECT-CURRENT GENERATOR, GENERAL SPECIFICATION FOR |
| MIL-PRF-32381 Revision B:2016 | Acoustic Hailing Device (Light) |
| MIL-DTL-5898 Revision H:2012 | CORDS, ELECTRICAL (WF-5/U, WF-14/U, WD-34/U, WM-53/U, WM-85/U) |
| MIL-E-24572 Revision B:1992 | EXTINGUISHER, FIRE, BROMOTRIFLUOROMETHANE (HALON 13O1) SYSTEMS (FIXED PIPE, PNEUMATICALLY ACTUATED, NAVAL SHIPBOARD USE) |
| SAE MA 2241 : 2015 | COUPLING ASSEMBLY, THREADLESS, FLEXIBLE, FIXED CAVITY, SELF-BONDING, METRIC |
| SAE AS 4251 : 2013 | COUPLING ASSEMBLIES, NON-LOCKING PROBE STYLE, SELF-ALIGNING, SELF-SEALING DISCONNECTS |
| MIL-S-25093 Revision B:1963 | SEA RESCUE KITS, DROPPABLE |
| MIL-R-50781 Base Document:1972 | RESOLVER, ELECTRICAL LINEAR GENERAL SPECIFICATION FOR |
| MIL-P-10388 Revision H:1990 | PIPE FITTING, ONE OR MORE ENDS GROOVED |
| MIL-C-13522 Revision C:1966 | CRUSHER, JAW, ROCK, AIRBORNE, 15-TPH CAPACITY |
| MIL-DTL-32460 Revision A:2017 | ADAPTER, HYDRAULIC AND PNEUMATIC, 37 DEGREES FLARE TUBE FITTING TO ORFS CONNECTORS, 1500 TO 3000 PSI AND -65 DEGREES F TO 250 DEGREES F, GENERAL SPECIFICATION FOR |
| MIL-DTL-83798 Revision D:2008 | FITTING, RUBBER HOSE, LIGHTWEIGHT, MEDIUM PRESSURE, GENERAL SPECIFICATION FOR |
| MIL-A-83216 Revision B:1976 | AIR CONDITIONER A/E32C-39 |
| MIL-P-85723 Base Document:1986 | PROJECTILE, 20 MILLIMETER, SEMI-ARMOR PIERCING, HIGH EXPLOSIVE INCENDIARY PGU-28/B |
| MIL L 14465 : C | LIGHTS, COMPOSITE, VEHICULAR (METRIC) |
| MIL PRF 52849 : D | TEST KIT, PETROLEUM: AVIATION FUEL CONTAMINATION (PORTABLE) |
| MIL L 45068 : D | LIGHT, DOME,VEHICULAR, 24 VOLT DIRECT CURRENT |
| MIL E 62177 : C | ENGINE, DIESEL: 12 CYLINDER, 90 V-TYPE, 750H.P. AVDS1790-2 AVDS1790-2A, AVDS1790-2C, AVDS1790-2D, AVDS1790-2DR, AVDS1790-2CA AND AVDS1790-2DA |
| MIL-I-27304 Revision E:1977 | INDICATOR, RATE OF FLOW |
| MIL C 25516 : D | CONNECTOR, ELECTRICAL, MINIATURE, COAXIAL, ENVIRONMENT RESISTANT TYPE, GENERAL SPECIFICATION FOR |
| MIL-B-3434 Revision C:1981 | BEATER, FOREST FIRE |
| MIL-S-87241 Base Document:1985 | SIMULATOR, FLIGHT (REQUEST FOR ISSUE OTHER THAN DOD MUST BE SENT VIA ASD/ENES WRIGHT PATTERSON AFB OH 45433-6503 |
| MIL-L-52430 Revision C:1991 | LIGHT, SIGNAL, SURVEYING 2 INCH & 5 INCH REFLECTORS, BATTERY POWERED WITH CASES |
| MIL B 8565 : J | BATTERY AND CELL, STORAGE, AIRCRAFT, GENERAL SPECIFICATION FOR |
| MIL E 24021 : J NOTICE 1 | ELECTRIC POWER MONITORS, EXTERNAL, AIRCRAFT |
| MIL-S-18471 Revision G:1983 | |
| MIL-DTL-10215 Revision M:2010 | SPEEDOMETERS, TACHOMETERS, FLEXIBLE SHAFT ASSEMBLIES, FLEXIBLE SHAFT ASSEMBLY CORES AND ADAPTERS |
| MIL-V-5461 Revision C:1977 | VALVE, VACUUM BREAKING |
| MIL-P-24364 Base Document:1969 | PLASTIC SHEET, LAMINATED, THERMOSETTING, ELECTRICAL INSULATING SHEET, GLASS MAT |
| MIL-T-7771 Revision B:1980 | TUBE, EXTENSION, GYRO STABILIZED DRIFT METER |
| MIL V 10537 : D | VOLTAGE REGULATOR GROUP, FOR MULTIPLEX PROJECTORS |
| MIL-S-12514 Revision C:1974 | STARTER, MOTOR, ACROSS THE LINE AND REDUCED VOLTAGE TYPES, AC INDUCTION, 3/4 TO 100 HP MANUAL AND ELECTRIC |
| MIL S 13625 : D | SWITCH, PULL, SWITCH, PUSH, SWITCH, BEAM SELECTING, HEADLIGHT, ELECTRICAL (28 VOLTS DC MAXIMUM, FOR MILITARY VEHICLES) |
| MIL T 5882 : D | TRANSMITTER, PRESSURE, MULTIPURPOSE, 0-50 PSI, MS28005-1 |
| MIL T 45333 : D NOTICE 2 | TRAILER, FLAT BED, 10 TON 4 WHEEL M345 |
| MIL-STD-275 Revision E:1984 | PRINTED WIRING - ELECTRONIC EQUIPMENT |
| MIL-STD-1547 Revision B:1992 | ELECTRONIC PARTS, MATERIALS, AND PROCESSES FOR SPACE VEHICLES |
| MIL-M-55660 Base Document:1969 | MODULE, IMAGE INTENSIFIER 18 MILLIMETER, TYPE 8857 |
| MIL-D-52634 Revision C:1985 | DETECTING SET MINE, PORTABLE, METALLIC AND NONMETALLIC AN/PRS-7 |
| MIL-S-10145 Revision D:1965 | SKETCHMASTER, VERTICAL, WITH CASE |
| MIL-P-19692 Revision E:1994 | PUMPS, HYDRAULIC, VARIABLE FLOW, GENERAL SPECIFICATION FOR |
| MIL-STD-13231 Base Document:1999 | MARKING OF ELECTRONIC ITEMS |
| MIL-D-63303 Revision B:1988 | DISPENSER, MINE, GROUND VEHICLE, M128 |
| MIL I 85581 : 0 | INTERVALOMETER, ROCKET LAUNCHER, REUSABLE |
| MIL-C-52973 Revision A:1987 | COMPRESSOR UNIT, 20 CFM, 5000 PSI, DIESEL-ENGINE-DRIVEN DIVING AIR |
| MIL-B-9972 Revision B:1994 | BRAZING, NICKEL, ALLOY, GENERAL SPECIFICATION FOR |
| MIL-L-51050 Revision B:1971 | LABORATORY, PETROLEUM,SEMITRAILER MOUNTED |
| MIL-T-18232 Revision B:1968 | TARGET, AERIAL, POWERED, DESIGN AND CONSTRUCTION OF GENERAL SPECIFICATION FOR |
| SAE AMS G 25871 : 2016 | GLASS, LAMINATED, AIRCRAFT GLAZING |
| MIL-PRF-32090 Revision A:2016 | DELIVERY SYSTEM, AERIAL, BULK FUEL |
| MIL C 9401 : B | CANOPY, PARACHUTE, RING SLOT, GENERAL SPECIFICATION FOR CONSTRUCTION OF 0ASG] |
| MIL-P-45971 Base Document:1975 | PRODUCT ENGINEERING QUALITY ENGINEERING SYSTEM (PEQES) FOR WEAPONS AND SUPPORT MATERIAL |
| MIL-DTL-27536 Revision C:1995 | COUPLING, CLAMP, GROOVED, V-BAND |
| MIL-C-14500 Revision C:1985 | CRADLE, BOAT, STEEL |
| MIL-S-24584 Base Document:1978 | STOPPERS, CARPENTER AND ASSOCIATED BRIDLES (WIRE ROPE AND CHAIN LINK) |
| MIL-S-62544 Base Document:1988 | SUPPRESSION FIRE, BROMOTRIFLUOROMETHANE, HALON 1301 SYSTEMS |
| MIL-B-467 Revision E:1988 | BREAKER, PAVING: PNEUMATIC |
| MIL-D-8804 Revision B:1993 | DE-ICING SYSTEM, PNEUMATIC BOOT, AIRCRAFT, GENERAL SPECIFICATION FOR |
| MIL-C-7474 Revision E:1978 | CASTER, INDUSTRIAL |
| MS35645 Revision G:2011 | CAP, FUEL TANK: TACTICAL VEHICLE, FORDING |
| MIL-PRF-53051 Revision C:2017 | PUMPING ASSEMBLIES, WHEEL-MOUNTED, DIESEL ENGINE DRIVEN, BULK TRANSFER, FUEL AND POTABLE WATER PUMPING SERVICE |
| MIL-R-7705 Revision B:1975 | RADOME, GENERAL SPECIFICATION FOR |
| MIL-STD-483 Revision A:1985 | CONFIGURATION MANAGEMENT PRACTICES FOR SYSTEMS, EQUIPMENT, MUNITIONS, AND COMPUTER PROGRAMS |
| MIL-B-13265 Revision C:1985 | BRIDGES, FIXED, STEEL, RAILWAY, UNIT CONSTRUCTION, 70-FT., 2-GIRDER SPAN: AND CONVERSION SETS: COMPONENTS OF |
| MIL-B-52097 Revision B:1992 | BAR, CARRYING, MULTIPLE AND SINGLE M4 BALK |
| MIL-S-20386 Revision D:1977 | STEREOMETER, PHOTOGRAMMETRIC; STEREOCOMPARAGRAPH-TYPE; WITH ACCESSORIES AND CASE |
| MIL-A-45016 Revision C:1985 | ALIGNMENT SERVICE UNIT MOTOR VEHICLE WITH FRAME STRAIGHTENING AND ALIGNMENT CAPABILITIES |
| MIL-C-62310 Revision A:1982 | CARRIER, ARMORED, FULL TRACKED, M113A2, M106A2, M125A2, & M577A2 AND CHASSIS, WEAPON, FULL TRACKED, M741A1, AND M901 |
| MIL T 52777 : A NOTICE 1 | TANK, STORAGE, UNDERGROUND, GLASS FIBER REINFORCED PLASTIC |
| MIL-H-22995 Revision A:1969 | HELMET SHELL ASSEMBLIES, PILOT S PROTECTIVE, APH-6 SERIES |
| MIL M 5755 : C | MIRROR, REARVIEW, NONMAGNETIC, GENERAL REQUIREMENTS FOR [FOR AERONAUTICAL USE] |
| MIL-S-82562 Base Document:1968 | SENSING CIRCUIT ASSEMBLY LD546972 (FOR AFTERBODY TEST SET MK 442 MOD O AND ELECTRICAL CABLE TEST SET MK 444 MOD O) |
| MIL-A-81852 Revision A:1986 | ALTIMETER-ENCODER AAU-32/A |
| MIL-I-25863 Revision D:1990 | INDICATOR, ELECTRICAL TACHOMETER 0-110 PERCENT RPM, 2-INCH SIZE, INTEGRALLY LIGHTED |
| MIL-I-22075 Revision C:1984 | Indicator, Bearing-Distance-Heading ID-663D/U |
| MIL H 8794 : D | HOSE, RUBBER, HYDRAULIC, FUEL AND OIL RESISTANT |
| MIL-L-52696 Base Document:1970 | LAMINATING RESIN |
| MIL-V-8712 Revision A:1965 | VALVE, AIR RELIEF, LOW PRESSURE |
| MIL C 55422 : 0 | CLIP, ELECTRICAL, GRID AND ANODE, GENERAL SPECIFICATIONS FOR |
| MIL-DTL-12520 Revision D:2005 | Connectors, Plug and Receptacle (Electrical, Waterproof), and Accessories; General Specification for |
| KKK-C-650 Revision E:1985 | CREEPER, MECHANIC'S |
| MIL-F-82566 Base Document:1968 | FIRE CONTROL ASSEMBLY LD546992 (FOR GUIDANCE CONTROL TEST SET MK 443 MOD O AND MOD 1) |
| MIL-B-44381 Base Document:1990 | BOARD, MAP, COMPLEXING (SICPS) |
| MIL-T-83727 Base Document:1969 | TRANSOLVER, GENERAL SPECIFICATION FOR |
| MIL-I-7063 Revision B:1979 | INDICATOR, POSITION, RUBBER TRIM TAB |
| MIL-B-23071:C | Blowers, Miniature, for Cooling Electronic Equipment General Specification for<br> |
| MIL-I-85832 Base Document:1989 | INTERCOM, HELICOPTER AIRCREWMAN, CHEMICAL, BIOLOGICAL, RADIOLOGICAL PROTECTIVE SET |
| MIL-C-85300 Base Document:1982 | COOLER, CRYOGENIC DETECTOR |
| MIL-R-47321 Base Document:1987 | REGULATOR, PRESSURE |
| MIL L 3976 : D | LIGHTS, MARKER, CLEARANCE (SERVICE & BLACKOUT) |
| DOD-S-70340 Base Document:1988 | SEAL RING, METAL, ASBESTOS FILLER, METRIC |
| MIL C 7905 : G | CYLINDERS, STEEL COMPRESSED GAS, NONSHATTERABLE, SEAMLESS 1800 PSI AND 2100 PSI |
| MIL-M-4871 Revision C:1984 | MAINTENANCE PLATFORM |
| GGG-W-00645 Revision B:1967 | WRENCH, OPEN END BOX (AND BOX COMBINATION CROWFOOT, RATCHET, AND RATCHET CROWFOOT) |
| MIL-C-4952 Revision E:1988 | CARTRIDGES, DESICCANT, DEHYDRATOR |
| GG-A-440 Revision C:1981 | ALIDADE, SURVEYING, TELESCOPE |
| MIL-A-47315 Revision A:1991 | ADHESIVE, POLYURETHANE |
| MIL C 5898 : D | CORD, ELECTRICAL [WF 5/U, WF 14/U,WD 34/U, WM 53/U, WM 85/U] |
| MIL-H-7365 Revision D:1986 | HOSE, AIR DUCT, FOR GROUND HEATERS |
| MIL-D-7106 Revision C:1987 | DRIFTMETER, ELECTRICALLY DRIVEN GYRO STABILIZED |
| MIL I 10986 : F | INDICATORS AND TRANSMITTERS, LIQUID, TEMPERATURE AND PRESSURE |
| MIL-R-38162 Revision B:1971 | RADIOSONDE SET AN/AMT 13 |
| DOD-B-70331 Base Document:1983 | Bolt, Self Locking, Hexagon Head, Steel, Metric, General Specification for |
| MIL M 62545 : B | MODULE, STANDARD ELECTRONIC CONTROL |
| MIL-C-20634 Revision D:1985 | CASE DRAWING BOARD AND PLANETABLE BOARD, 15-BY 20-INCH |
| MIL-C-426 Revision B:1968 | CARRIER, TIMBER, HANDLED |
| MIL-G-23676 Base Document:1963 | GAGE, PRESSURE, DIAL INDICATING, OXYGEN, HIGH PRESSURE |
| MIL G 82639 : 0 | GLOVE ASSEMBLIES, TOXIC, INFECTIOUS, OR VESICANT SUBSTANCES, PROTECTIVE |
| MIL R 26895 : 0 | RELAY, FIELD CONTROL, GENERATOR 28 VOLT DC, TYPE MD AND 1 |
| MIL-L-52918 Base Document:1977 | LEVELS, SURVEYING, SELF LEVELLING AND TILTING |
| MIL C 22263 : B | COUPLING FUEL LINE, FLEXIBLE, 125 PSI, GENERAL SPECIFICATION FOR |
| MIL-A-38202 Revision C:1972 | AIRCRAFT ARRESTING SYSTEM BAK-12A/E32A; PORTABLE, ROTARY FRICTION |
| MIL-C-85248 Revision A:1984 | CAMERA, STILL PICTURE, PANORAMIC, KA-99A |
| JSSG-2001 Revision B:2004 | Air Vehicle |
| MIL M 83521 : A | MAINTENANCE KIT, ELECTRICAL CONNECTORS, GENERAL SPECIFICATION FOR |
| MIL C 0052876 : C | CABINETS, MONITOR, CY 7359/FSS 9(V) AND CY 7361/FSS 9(V) |
| MIL C 5033 : C | CLOCK, AIRCRAFT, CIVIL DATE 24 HOUR DIAL 2 3/4 IN DIAMETER |
| MIL-B-24141 Revision A:1990 | BLOCKS, TACKLE, WIRE ROPE |
| SAE AIR 4728 : 2013 | REFERENCES, SPACECRAFT AND SPACECRAFT SERVICING, FLUID SYSTEM COMPONENTS (ABBREVIATIONS, ACRONYMS, DEFINITIONS, APPLICABLE DOCUMENTS AND ENVIRONMENTAL CONDITIONS) |
| MIL-C-1193 Revision A:1992 | COMPASSES, SHIP, NAVY, NO. 1, MAGNETIC (REFLECTOR TYPE, 7-1/2 INCH CARD) AND BINNACLE, REFLECTOR TYPE |
| MIL-P-25726 Revision B:1959 | PROBE, TOTAL TEMPERATURE, TYPE MA-1 |
| MIL-F-27630 Revision D:1970 | FILTER-SEPARATOR, LIQUID FUEL FFU-2/E |
| MIL-B-13889 Revision C:1973 | BRUSHES AND STAFFS, CANNON BORE |
| MIL-DTL-55116-16 Base Document:2018 | Cap, Protective |
| MIL W 5846 : C | WIRE, ELECTRICAL, CHROMEL AND ALUMEL, THERMOCOUPLE |
| MIL-S-13949 Revision H:1993 | SHEET, PRINTED WIRING BOARD, GENERAL SPECIFICATION FOR |
| MIL-PRF-23256 Revision C:1998 | VALVE ASSEMBLY, SEAL |
| MIL-C-62747 Base Document:1994 | CARRIER-CARGO, TRACKED, 6 TON-M548A3 |
| MIL-A-47309 Revision A:1991 | AMPLIFIER, PNEUMATIC |
| MIL-DTL-55116-5 Revision B:2004 | Connector, Plug, Five Pin Audio, Crimp Sleeve Terminals, Molded Strain Relief, U-182 Type |
| MIL-DTL-55353 Revision A:1999 | HEADSET, ELECTRICAL, H-216 A/U |
| MIL S 25073 : 0 | |
| MIL-P-83763 Base Document:1969 | POWER SUPPLY, TRANSISTORIZED |
| MIL-H-85042 Revision A:1983 | HOOKS, BOMB RACK, GENERAL SPECIFICATION FOR |
| MS24120 Revision E:2004 | RING, COUPLING, ROTATING |
| MIL-DTL-32077 Revision B:2018 | Horn, Flyer\'s Relief Tube |
| MIL-V-85033 Revision A:1981 | VALVE CHARGING |
| MIL-S-29413 Revision B:1988 | SHELTER, JOINING CORRIDOR FOR |
| MIL B 8111 : F | BOX SET, WOOD, NESTED, ORGANIZATIONAL EQUIPMENT TYPE MG AND 1A |
| MIL-C-87987 Base Document:1989 | CRANE, HYDRAULIC, WHEEL MOUNTED, 7.5 & 15 TON CAPACITIES |
| MIL-P-18948 Revision B:1992 | PROJECTILE, PAINTING, MARKING AND GREASING (BY PROJECTILE MANUFACTURERS) |
| ASTM F 2431 : 2004 : R2018 | Standard Specification for Ring Bearing, Inner: For Needle Roller Bearing with Thick Outer Ring |
| MIL-C-5584 Revision D:1988 | CONTAINER, SHIPPING AND STORAGE, METAL REUSABLE |
| MIL-W-52482 Revision D:1978 | WATER PURIFICATION UNIT, ELECTRIC MOTOR DRIVEN ERDLATOR TYPE CLARIFIER, DIATOMITE TYPE FILTER, VAN BODY MOUNTED 1,500 GPH |
| MIL B 8598 : A (1) | BULB, ELECTRICAL RESISTANCE, THERMOMETER, FREE AIR |
| MIL S 62546 : A | SENSOR, FIRE, OPTICAL |
| MIL-R-8903 Revision A:1966 | RESISTOR, VARIABLE, LINEAR PRECISION, TAPPABLE [ASG] |
| MIL C 85361 : 0 | CARRYING CASE ASSEMBLIES, INFLATABLE LIFE RAFT |
| MIL-DTL-25677 Revision G:2016 | ADAPTER, CAP, AND NOZZLE, PRESSURE LUBRICATING OIL SERVICING, AIRCRAFT, GENERAL SPECIFICATION FOR |
| MIL-C-85642 Base Document:1985 | COMMUNICATIONS CENTRAL AN/ASC-26 |
| MIL-C-1002 Revision J:1986 | CASE, FIELD, FIRST AID DRESSING, LEATHER, (MILITARY POLICE) |
| MIL C 39012 : C | GENERAL SPECIFICATION FOR RADIO FREQUENCY COAXIAL CONNECTORS |
| MIL C 27613 : A | COVERALLS, ROCKET FUEL HANDLERS, CMU/2/P |
| MIL I 6839 : C | INDICATOR, POSITION, LANDING GEAR |
| FF-B-171 Revision B:1993 | BEARINGS, BALL, ANNULAR (GENERAL PURPOSE), METRIC |
| MIL-B-25337 Revision B:1970 | BOTTLE ASSEMBLIES, VACUUM, AIRCRAFT |
| MIL-B-81936 Base Document:1973 | BEARINGS, PLAIN, SELF ALIGNING (BECU, CRES RACE) |
| MIL-R-1296 Revision F:1993 | RIFLE, CALIBER .22 LR COMMERCIAL, FOR MATCH AND TRAINING |
| MIL J 83010 : B NOTICE 1 | JACK, AIRCRAFT LANDING GEAR MMU-87/E, 35-TON CAPACITY |
| MIL-H-53062 Base Document:1986 | HOSE ASSEMBLY, RUBBER LIGHTWEIGHT, COLLAPSIBLE 6 INCH; FOR POL SERVICE |
| MIL-N-23182 Revision A:1967 | NETWORKS, PULSE FORMING, RADAR, GENERAL SPECIFICATION FOR |
| MIL B 43021 : E | BINDER, LOAD, CARGO TIE-DOWN, 10,000 POUND CAPACITY |
| MIL-A-81851 Revision B:1986 | ALTIMETER AAU-31/A |
| MIL-G-10944 Revision B:1965 | GAGE, DIMENSIONAL CONTROL |
| MIL-A-20383 Revision D:1982 | ARROW SETS, SURVEYING |
| MIL-S-7014 Revision C:1970 | SOLENOID, FIRING CALIBER .50 GUN 28 VOLT DC TYPE G AND 22 |
| MIL-C-43011 Revision A:1978 | CARRYING CASE, TEST SET, SOIL TRAFFICABILITY |
| MIL-B-11582 Revision C:1978 | BASE PLATE, THEODOLITE: ALUMINUM |
| MIL-D-537 Revision F:1992 | DISKS, COLOUR STANDARDS |
| MIL C 13113 : B | CHEST SET GROUP AN/GSA-6() |
| MIL-C-5136 Revision C:1968 | CABLE, POWER, ELECTRICAL POLYCHLOROPRENE SHEATHED, BUNA COMPOUND INSULATED |
| MIL-L-11566 Revision C:1978 | LEVEL, LEVEL ROD |
| MIL-C-83864 Revision A:1982 | CONTAINER, INNER, SURVIVAL KIT |
| MIL-T-27200 Revision C:1975 | TRANSMITTER, RATE GYROSCOPE TRU-2A/A |
| MIL-L-38217 Revision D:1975 | LIGHT, MARKER DISTRESS |
| MIL-T-62063 Base Document:1967 | TIME DELAY UNIT, ADJUSTABLE, SOLID STATE |
| MIL-B-24222 Revision A:1978 | BAGS , STORAGE, MASK, AIR LINE |
| MIL-V-8883 Revision B:1965 | VALVE, INLET, LIFE RAFT |
| MIL-O-16485 Revision C:1962 | OHMMETER, INSULATION RESISTANCE INDICATING, PORTABLE |
| MIL-D-23859 Revision C:1976 | DELAY LINES, PULSE, ELECTROMAGNETIC, FIXED GENERAL SPECIFICATION FOR |
| MIL-B-21418 Base Document:1958 | BELTING SYSTEM, AMMUNITION, MARK 2 MOD O (FOR 2O MM MARK 1OO SERIES AMMUNITION) |
| MIL-H-10044 Revision B:1964 | HINGE, CHEST, OFFSET |
| MIL V 7560 : C | VALVE ASSEMBLY, OXYGEN CYLINDER, BAILOUT |
| MIL-DTL-25308 Revision C:2010 | GAGE, PRESSURE, DIAL INDICATING, HYDRAULIC, TYPE ME-1 |
| MIL-PRF-32516 Base Document:2015 | ELECTRONIC TEST EQUIPMENT, INTERMITTENT FAULT DETECTION AND ISOLATION FOR CHASSIS AND BACKPLANE CONDUCTIVE PATHS |
| MIL-G-85468 Base Document:1981 | GENERATOR CONTROL INDICATOR SG-118/AST-4(V) |
| MIL C 22520 : F | CRIMPING TOOLS, TERMINAL HAND OR POWER ACTUATED, WIRE TERMINATION AND TOOL KITS - GENERAL SPECIFICATION FOR |
| MIL-DTL-7990 Revision D:2012 | Transmitter, Temperature, Electrical Resistance, -70 Degrees to +300 Degrees C |
| MIL-I-5417 Revision D:1968 | INDICATOR, INDICATED AIRSPEED 40-400 KNOTS |
| MIL-I-5721 Revision C:1970 | INDICATOR, INDICATED AIRSPEED 20-250 KNOTS |
| MIL-I-8700 Revision A:1970 | INSTALLATION AND TEST OF ELECTRONIC EQUIPMENT IN AIRCRAFT, GENERAL SPECIFICATION FOR |
| MIL-D-81068 Base Document:1964 | DEVICE, HIT AND LOCATING (FOR TORPEDO MK 46 MOD O) |
| MIL-P-82563 Base Document:1968 | POWER SUPPLY ASSEMBLY LD546974 (FOR AFTERBODY TEST SET MK 442 MOD O AND ELECTRICAL CABLE TEST SET MARK 444 MOD O) |
| MIL-V-9999 Revision B:1970 | VOLTMETER, ELECTRONIC |
| MIL-DTL-81722 Revision B:2017 | VALVE, INFLATION, LIFE RAFT, FLU-6/P |
| MIL-A-27328 Base Document:1960 | AMPLIFIER-INDICATOR GROUP, ALTITUDE VERTICAL SPEED A/A24G-7 |
| MIL-DTL-55116-3 Revision B:2004 | Connector, Plug, Five Pin Audio, Solder Cup Terminals, Wire Strain Relief, U-229 Type |
| MIL PRF 0032381 : A | ACOUSTIC HAILING DEVICE (LIGHT) |
| MIL-DTL-27443 Revision F:2003 | PALLETS, CARGO, AIRCRAFT, TYPE HCU-6/E AND HCU-12/E |
| MIL C 19328 : E | CONVERTER, LIQUID OXYGEN, 5 LITER, MBA-5A |
| MIL-DTL-21393-3 Base Document:2005 | Holder, Microphone M21393/3-01 |
| MIL I 7304 : B | INDICATOR, PRESSURE TORQUE SENSITIVE TYPE A 9 |
| SAE AS 19692 : 2016 | Aerospace – Military Type Variable Delivery, Pressure Compensated Hydraulic Pump |
| SAE AMS R 5001 :1998(S2015) | RUBBER CELLULAR SHEET, MOLDED AND HAND-BUILT SHAPES; LATEX FOAM |
| MIL I 9304 : B | INDICATOR, RATE OF FLOW, FUEL, SYNCHRO STYLE 0-12,000 PPH TYPE MA 6 |
| MIL-DTL-28754-94 Revision A:2015 | CONNECTORS, ELECTRICAL, MODULAR, CONNECTOR FRAME, TYPE 4, DIP, 0.4 PITCH, FORMAT C, D AND E |
| MIL-I-5488 Revision A:1957 | INDICATOR TURN AND SLIP 28V DC 2 3/4 SIX, TYPE MD 10 |
| MIL-I-5482 Revision C:1960 | INDICATOR, PRESSURE, SYNCHRO, AIRCRAFT 165 DEGREE SCALE |
| MIL-A-25487 Revision B:1987 | ANTENNA AT-172()/ARN-14 |
| SAE AS 4098 : 2013 | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, HEAVY DUTY, METALLIC REINFORCED, 400 DEGREE F, 5000 PSI HYDRAULIC AND PNEUMATIC |
| MIL-DTL-55116-6 Revision B:2004 | Connector, Plug, Six Pin Audio, Crimp Sleeve Terminals, Molded Strain Relief, U-182 Type |
| GGG-W-665 Revision C:1996 | WRENCH, SPANNER |
| SAE AS 7997:1999 | MOTORS, AIRCRAFT HYDRAULIC, CONSTANT DISPLACEMENT - GENERAL SPECIFICATION FOR |
| DOD-P-70330 Base Document:1982 | PLUG, EXPANSION METRIC, GENERAL SPECIFICATION FOR |
| SAE MA 1339 : 2015 | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, METALLIC REINFORCED, 21,000 KPA, 204 DEGREE C, LIGHTWEIGHT, HYDRAULIC AND PNEUMATIC, METRIC |
| SAE AMS G 25667 : 2016 | GLASS, MONOLITHIC, AIRCRAFT GLAZING |
| SAE AS 22227 : 2014(S2018) | BEARING, BALL, ANNULAR, GENERATOR AND MOTOR GENERATOR |
| SAE AS 38386 : 2013 | DUCT ASSEMBLY, GROUND, CONDITIONED AIR, INSULATED, FLEXIBLE |
| SAE AS 7510 : 2017 | COUPLING ASSEMBLY, THREADLESS, FLEXIBLE, SELF-LOCKING, FIXED CAVITY, HIGH CONDUCTIVITY, SELF-BONDING, PART SPECIFICATION |
| SAE ARP 1616 : 2017 | SELF-SEALING BREAKAWAY VALVES FOR CRASH-RESISTANT AIRCRAFT FUEL AND OIL SYSTEMS |
| SAE AS 5658 A : 2016 | PLATFORM/SUBSYSTEM COMMON INTERFACE CONTROL DOCUMENT FORMAT |
| DSCC 84191 : K | EXTRACTOR, ELECTRICAL CARD, METAL |
| SAE AS 8914 : 2016 | BEARING, ROLLER, SELF-ALIGNING, AIRFRAME, ANTIFRICTION |
| DSCC 90029 : B | SHIELDING BEADS, FERRITE |
| SAE AS 85376 : 2007 | STAND, SHIPBOARD, HELICOPTER MAINTENANCE |
| SAE AS 8796 : 2013 | HOSE, AIR DUCT, FLEXIBLE, AIRCRAFT |
| SAE AS 1709 : 2014 | COUPLING ASSEMBLY, HYDRAULIC SELF SEALING, QUICK DISCONNECT |
| SAE AS 39631 : 1999 | UNIVERSAL JOINT, ANTIFRICTION BEARINGS |
| SAE MA 2126 : 2015 | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE (PTFE), UP TO 232 DEGREES C AND 10 500 KPA PROCUREMENT SPECIFICATION, METRIC |
| ASTM F 2443 : 2004 | Standard Specification for Roller, Bearing, Needle Ferrous, Solid, Spherical End |
| ASTM F 2246 : 2006 : EDT 1 | Standard Specification for Bearing, Roller, Needle: Thick Outer Ring With Rollers and Cage |
| ASTM F 1166 : 2007 | Standard Practice for Human Engineering Design for Marine Systems, Equipment, and Facilities |
| ASTM F 2443 : 2004 : R2012 | Standard Specification for Roller, Bearing, Needle, Ferrous, Solid, Spherical End |
| NASA MSFC SPEC 3635 : 2012 | PYROTECHNIC SYSTEM SPECIFICATION |
| NASA STD 5005 : 2013 | STANDARD FOR THE DESIGN AND FABRICATION OF GROUND SUPPORT EQUIPMENT |
| MIL-DTL-53078 Revision A:2011 | MOUNTING KIT: M1 TANK CLEARED LANE MARKING SYSTEM (CLAMS) |
| NASA KSC STD E 0001 : 2008 | DESIGN OF ELECTRICAL CONTROL AND MONITORING SYSTEMS, EQUIPMENT (GSE), AND PANELS, STANDARD FOR |
| MIL-DTL-13791 Revision H:2015 | DISTRIBUTOR, IGNITION SYSTEM: INTEGRAL COIL, WATERPROOF 24 VOLT |
| MIL-PRF-32181 Revision B:2015 | TRUCK, FORKLIFT, 4,000 AND 6,200 POUND CAPACITY, LOADING, INTERNAL COMBUSTION ENGINE |
| MIL-PRF-21480 Revision B:2010 | GENERATOR SYSTEM, ELECTRIC POWER, 400 HERTZ, ALTERNATING CURRENT, AIRCRAFT - GENERAL SPECIFICATION FOR |
| MIL-DTL-83361 Revision B:2007 | INDICATOR, PRESSURE, OIL, DUAL, 0-100 PSI, EGU-18/A |
| MIL-DTL-43101 Revision B:2013 | FILING CABINET, LETTER SIZE DESIGN, STEEL, OD, ONE DRAWER HIGH, ONE DRAWER WIDE |
| MIL-PRF-57267 Base Document:2017 | COUPLING, AERIAL PRESSURE REFUELING TYPE MA-5 |
| SAE AS 5830 : 2017 | COUPLING ASSEMBLY, THREADLESS, FLEXIBLE, FIXED CAVITY, CURRENT CARRYING, SELF-BONDING, PROCUREMENT SPECIFICATION |
| MIL-DTL-27715 Revision C:2014 | Circuit Breaker, Trip-Free, High Temperature, Aircraft General Specification for |
| MIL-DTL-71172 Revision B:2005 | CYLINDER, RECUPERATOR, RECOIL, M119A1/A2 HOWITZER LIGHT, TOWED: 105 MM |
| MIL G 6162 : B | GENERATOR AND STARTER GENERATOR, ELECTRIC DIRECT CURRENT, NOMINAL 30 VOLTS AIRCRAFT GENERAL SPECIFICATION |
| MIL-C-13720 Revision B:1983 | CLAMP, BEAM, CARGO LASHING |
| MIL-DTL-9490 Revision E:2008 | FLIGHT CONTROL SYSTEMS - DESIGN, INSTALLATION AND TEST OF PILOTED AIRCRAFT, GENERAL SPECIFICATION FOR |
| MIL-S-29410 Revision B:1988 | SHELTER ASSEMBLY, RIGID GENERAL PURPOSE |
| MIL-DTL-19328 Revision F:1996 | CONVERTER, LIQUID OXYGEN, 5 LITER, MB-5A |
| MIL-A-52628 Revision B:1977 | ANCHOR, PROPELLANT EMBEDDED |
| MIL-R-12144 Revision F:1982 | REFLECTOR, INDICATING, CLEARANCE |
| MIL-DTL-12211 Revision G:2009 | Switch, Pressure |
| MIL-I-47203 Base Document:1967 | INSULATION SLEEVING, ELECTRICAL, BRAIDED |
| MIL C 4710 : D | CASE SET, TRANSPORT AND STORAGE |
| AA-C-295 Base Document:1955 | CHAIR, ROTARY, STEEL TUBULAR, SPECIAL PURPOSE |
| MIL F 62265 : A | FILTER ELEMENT AND RELIEF VALVE, FLUID PRESSURE, HYDRAULIC (M-60 TANK SERIES) |
| MIL-I-62522 Base Document:1987 | INSULATION, PANEL, NOISE AND THERMAL-BARRIER |
| MIL-A-23622 Base Document:1963 | ACTUATOR, AIRCRAFT, ELECTRO-MECHANICAL, LINEAR, DIRECT CURRENT |
| MIL I 5099 : B | INDICATOR CABIN AIR PRESSURE, 1-7/8 INCH DIAL, TYPE MA-1 |
| MIL I 25725 : A | INDICATOR, TORQUE PRESSURE, MAGNESYN STYLE, SINGLE CLAMP MOUNTED, 2 IN SIZE, 50-400 PSI TYPE A-8 |
| MIL-I-18804 Revision B:1964 | INDICATOR, VERTICAL SPEED, 0 - 6000 FPM, 2 INCH |
| MIL-B-87986 Base Document:1989 | BEAD BREAKER, PNEUMATIC TIRE |
| MIL B 24302 : 0 | BRAZING SYSTEM, NEAR INFRARED QUARTZ LAMP |
| MIL-I-85889 Base Document:1988 | IGNITER, JET ASSISTED TAKE OFF (JATO) PROPULSION SYSTEM, GENERAL DEVELOPMENT SPECIFICATION FOR |
| MIL C 83438 : 1986 | CLOTHING OUTFITS, EXTREME COLD WEATHER SURVIVAL |
| MIL L 27639 : C (2) | LIFE PRESERVER INFLATING ASSEMBLY FLU-1A/P |
| MIL T 55095 : 0 | TEST SET, SERVO MODULATOR |
| MIL-C-11198 Revision K:1984 | CHEST, ICE STORAGE |
| MIL-P-3756 Revision D:1980 | PROTRACTOR, ONE ARM SEMICIRCULAR [CORROSION RESISTANT ALLOY WITH CAE] |
| MIL-M-6404 Revision A:1965 | METER, VOLUMETRIC, POSITIVE DISPLACEMENT LIQUID, TYPE F 1 AIRCRAFT FUEL 300 GALLONS PER MINUTE |
| MIL-D-6055 Revision D:1987 | DRUM, METAL REUSABLE, SHIPPING AND STORAGE [CAP FROM 88 TO 510 CUBIC INCHES] |
| MIL-PRF-25670-1 Revision B:2006 | EARPHONE ELEMENT, H-136/AIC |
| MIL-T-83720 Base Document:1968 | TRANSFORMER AND INDUCTORS, NONEXPLOSIVE, GENERAL SPECIFICATION FOR |
| MIL-S-6785 Revision D:1955 | SOLENOID, REMOTE GUN FIRING, TYPE G 9B |
| MIL I 38135 : B (3) | INDICATOR, INDICATED AIRSPEED AVU 19/A STANDBY |
| MIL-A-13325 Revision A:1960 | ADAPTER, TELESCOPE, M9A1 |
| MIL-DTL-9320 Revision E:2010 | SIGNAL, WARNING, AUDIBLE, FOR HEADSET, TYPE MA-1 |
| MIL P 62736 : 1992 | PRINTED WIRING ASSEMBLY |
| A-A-50748 Base Document:1987 | HOLSTER, HIP, PISTOL, SEMI AUTOMATIC, 9MM |
| MIL-O-55593 Base Document:1969 | OVEN ASSEMBLY, WITH QUARTZ CRYSTAL UNITS, GENERAL SPECIFICATION FOR |
| MIL-C-6720 Revision C:1964 | CLOCK, AIRCRAFT, ELAPSED TIME, CIVIL DATE 24 HOUR 2 3/4 INCH DIAL |
| MIL-STD-3035 Base Document:2013 | DESIGN CRITERIA STANDARD - USAF AIRCRAFT ARRESTING SYSTEMS |
| AA-F-00360 Revision B Interim Revision:2002 | FILING CABINETS, STEEL, MAP AND PLAN, (SECTIONAL) |
| MIL-DTL-20277 Revision K:2014 | KNIFE, COMBAT; AND SHEATH, GENERAL SPECIFICATION FOR |
| KKK-T-683 Revision F:2010 | TRUCKS, HAND, TWO-WHEELED |
| MIL-STD-490 Revision A:1985 | SPECIFICATION PRACTICES |
| MIL-A-27015 Base Document:1960 | ADAPTER, TEST TS-1371/GWM-4 |
| MS53001 Revision B:2011 | Switch, Beam Selecting Headlight DPDT, No Off, 28 Volt DC |
| MIL-DTL-38394 Revision E:2009 | Transmitter, Pressure TRU-81/A, Oil, 0-500 PSI |
| MIL-S-10385 Revision F:1979 | SANDTRAP ASSEMBLY [FOR PORTABLE 6 INCH PETROLEUM PIPELINE |
| MIL G 8360 : A | GAGE, PRESSURE, DIAL INDICATING, MANIFOLD PRESSURE, 10-75 IN MERCURY TYPE MB 1 |
| MIL D 62559 : LATEST | DISTRIBUTION BOX, VEHICLE |
| MIL-DTL-81543 Revision C:2010 | CONTAINER ASSEMBLIES, INFLATABLE LIFE RAFT |
| MIL-DTL-52007 Revision D:2007 | MOUNTING ADAPTER ASSEMBLY, AIRPORT MARKER LIGHT |
| A-A-50747 Base Document:1987 | POUCH, AMMUNITION MAGAZINE, 9 MM |
| MIL-A-7292 Revision A:1952 | ANTENNA AT-190B/AP |
| MIL-A-25081 Base Document:1955 | AMPLIFIER, ELECTRONIC CONTROL, 2 CHANNEL, APPROACH AND NAVIGATIONAL, TYPE MB-4 |
| MIL-PRF-32390 Base Document:2011 | ENGAGING DEVICE, AIRCRAFT ARRESTING SYSTEM - USAF PENDANT CABLE RETRACTION SYSTEMS (PCRS) |
| MIL-A-47317 Base Document:1987 | ADHESIVE, AIR DRYING, SILICONE RUBBER |
| MIL-D-38386 Revision E:1989 | DUCT ASSEMBLY, GROUND, CONDITIONED AIR, INSULATED, FLEXIBLE |
| AA-S-00275 Base Document:1964 | SHELVING, STORAGE AND DISPLAY, STEEL, BOLTLESS |
| MIL C 27019 : B | CARTRIDGE KIT, BOMB EJECTION MLU-9/B |
| MIL-G-82455 Base Document:1966 | Generator, Gas |
| MIL-C-52326 Revision B:1974 | CRANE, CRAWLER MOUNTED, 60 TON AT 25 FOOT RADIUS, DIESEL ENGINE DRIVEN |
| MIL-PRF-87893 Revision B:1997 | WORKSTATION, ELECTROSTATIC DISCHARGE (ESD) CONTROL |
| MIL-R-21530 Revision D:1962 | RESOLVERS, ELECTRICAL, AC FOR USE IN POLARIS FLEET BALLISTIC MISSILE WEAPON SYSTEM GENERAL SPECIFICATION FOR |
| MIL-M-5793 Revision A:1954 | MICROPHONE M-3A/A |
| MIL-L-21652 Revision A:1964 | LIGHT, BEACON, ANTI COLLISION AIRCRAFT GENERAL SPECIFICATION FOR |
| MIL S 9479 : C | |
| MIL-DTL-7961 Revision D:2007 | LIGHTS, INDICATORS, PRESS TO TEST |
| MIL-L-50096 Revision A:1963 | LABORATORY, PETROLEUM, BASE |
| MIL-R-43838 Revision B:1993 | RELEASE, CARGO PARACHUTE, AIRDROP, M-2 |
| MIL S 29580 : B | SPECTACLES, AVIATOR'S, MULTIPLE WAVE LENGTH LASER PROTECTIVE, EDU 5 P (WITH CASE) |
| MIL-I-26689 Revision C:1981 | INDICATOR, HORIZONTAL SITUATION, AQU-2/A |
| MIL-T-10086 Revision H:1980 | TANK, LIQUID STORAGE, METAL, VERTICAL, BOLTED |
| MIL-I-58067 Revision A:1977 | INDICATOR, VERTICAL VELOCITY, RAPID RESPONSE ACCELERATION SENSITIVE, GENERAL SPECIFICATION FOR |
| DOD-B-53061 Base Document:1985 | BELTS, V: POLYURETHANE |
| AA-C-295 Revision A Interim Revision:1963 | CHAIRS, ROTARY, STEEL, TUBULAR SPECIAL PURPOSE |
| MIL C 12520 : C | CONNECTOR, PLUG AND RECEPTACLE (ELECTRICAL, WATERPROOF), AND ACCESSORIES: GENERAL SPECIFICATION FOR |
| MIL-M-27386 Revision D:1979 | MANIFOLD ASSEMBLIES, HOSELINE, FUELING, 4-INCH QUICK COUPLING TYPE |
| MIL-R-11521 Revision G:1993 | RING, EXPANSION, HOSE, BRASS |
| MIL A 22641 : D | ADAPTOR, COAXIAL TO WAVEGUIDE, GENERAL SPECIFICATION FOR |
| MIL C 8783 : A | CLAMP, HOSE, FLAT BAND 500 DEG. F |
| MIL-B-38951 Revision A:1964 | BOMB, LOADING PRACTICE BDU-32/E |
| MIL M 11101 : C NOTICE 1 | MICROPHONES, DYNAMIC |
| MIL-W-52874 Revision B:1983 | WATER QUALITY ANALYSIS SET, ENGINEER |
| MIL-M-52793 Base Document:1974 | MULTIMETER, BATTERY TESTING, 0 TO 35 AMP, 0 TO 10 VOLT |
| MIL-S-11578 Revision D:1978 | SHAKING MACHINE, TESTING SIEVE, LABORATORY, PORTABLE, HAND OPERATED, CAPACITY 6 FULL HEIGHT OR 13 HALF HEIGHT 8 INCH STANDARD SIEVES |
| MIL-V-5622 Revision A:1963 | Volt-Ammeter, Dual Pointer Direct Current |
| MIL-T-81587 Revision A:1971 | TIMER ASSEMBLY RAIN REPELLENT |
| MIL-D-16211 Revision D:1962 | DUMMY LOAD, ELECTRICAL, DUMMY ANTENNA TS-235B/UP |
| MIL-R-38987 Base Document:1972 | RADIAC SET AN/PDR-69 |
| MIL-C-11569 Revision D:1979 | CLAMPS, HOSE, WATER, UNIVERSAL 3/8- TO 1-INCH AND 1- TO 3-INCH |
| MIL T 55069 : C NOTICE 1 | TRAINING AID, MODEL BRIDGE, FLOATING ALUMINUM, HIGHWAY TYPE, DECK BALK SUPERSTRUCTURE ON PNEUMATIC FLOATS |
| MIL-B-6038 Revision A:1961 | BEARING, BALL BELLCRANK, ANTI FRICTION, AIRFRAME |
| MIL-I-13042 Revision A:1968 | INSULATION SLEEVING, THERMAL, TUBULAR, FLEXIBLE |
| MIL L 3661 : B | LAMPHOLDER, INDICATOR LIGHTS, INDICATOR LIGHT HOUSINGS AND INDICATOR LIGHT LENSES GENERAL SPECIFICATION FOR |
| MIL-DTL-5882 Revision E:2013 | TRANSMITTER, PRESSURE, MULTIPURPOSE, 0-50 PSI, MS28005-1 |
| MIL-L-12197 Revision F:1993 | LADDER, FIRE, EXTENSION, LADDERS, FIRE, SINGLE, AND LADDERS, FIRE, A-FOLDING EXTENSION |
| MIL-DTL-52618 Revision F:2012 | FITTINGS, PIPE, ALUMINUM-ALLOY THREADED, 150-POUND, GENERAL SPECIFICATION FOR |
| MS53062 Revision B:2014 | CABLE AND CONDUIT ASSEMBLY, PARKING BRAKE - STRAIGHT TYPE, EYE AND BUTTON FITTINGS |
| MIL-DTL-5755 Revision E:2012 | MIRROR, REARVIEW, NONMAGNETIC, GENERAL REQUIREMENTS FOR (FOR AERONAUTICAL USE) |
| MIL-DTL-55116-8 Revision B:2004 | Connector, Plug, Six Pin Audio, Solder Cup Terminals, Molded Strain Relief, U-182 Type |
| MS17981 Revision D:2001 | SOLENOID, ELECTRICAL, HORN, 24 VOLT DC |
| MIL-DTL-43021 Revision F:2003 | BINDER, LOAD, CARGO TIE-DOWN, 10,000 POUND CAPACITY |
| MIL-DTL-5498 Revision G:2013 | ACCUMULATORS, HYDRAULIC, CYLINDRICAL 3000 PSI, AIRCRAFT |
| MIL S 13484 : E | SWITCH, SENSITIVE, 30 VOLTS DIRECT CURRENT MAXIMUM, WATERPROOF |
| MIL-DTL-62545 Revision E:2013 | Module, Standard Electronic Control |
| MIL-PRF-12048 Revision E:1998 | PETROLEUM TESTING KIT, GROUND FUELS |
| MIL-DTL-19246 Revision E:2007 | CONNECTOR, OXYGEN MASK HOSE, TYPE MC-3A |
| MIL-W-5845 Revision C:1973 | WIRE, ELECTRICAL, IRON AND CONSTANTAN, THERMOCOUPLE |
| MIL V 62671 : 1993 | VALVE, BYPASS, FUEL, MECHANICAL |
| MIL-I-25931 Revision B:1964 | INDICATOR, POSITION, LANDING GEAR, SYMBOL-INDICATING, INTEGRALLY LIGHTED |
| MIL-F-8905 Revision B:1967 | FITTINGS AND CARGO RINGS, TIEDOWN, AIRCRAFT FLOOR |
| SAE AS 1896 : 2013 | COUPLING ASSEMBLY, SELF-SEALING, ONE SIDE ONLY, HYDRAULIC |
| MIL-P-25632 Revision B:1960 | PITOT STATIC TUBE, ELECTRICALLY HEATED, TEMPERATURE CONTROLLED, 115 VOLT, 4OO HZ, TYPE MA-1 |
| GGG-B-500 Revision D:2015 | BLOCK, TACKLE (WIRE ROPE) |
| MIL-PRF-62413 Revision B:2010 | SPEED PICKUP, MAGNETIC (METRIC) |
| MIL-R-87989 Base Document:1989 | REVETMENT KIT, PREFABRICATED PIN TYPE, CORRUGATED STEEL PANELS |
| MIL-A-5034 Revision B:1979 | ADAPTER, BOMB RACK, 30-INCH, AERO 1A |
| MIL C 24788 : 0 | COUPLING ASSEMBLY, SEMI-DRY-BREAK QUICK-DISCONNECT, FUEL WITH OR WITHOUT CONTINUITY SWITCH |
| MIL-PRF-32144 Revision B:2012 | CLOCK, AIRCRAFT, ELECTRONIC |
| MIL-A-25367 Revision B:1988 | ANTENNA AT-536/ARN |
| MIL-T-47326 Base Document:1990 | TAPE, PRESSURE-SENSITIVE ADHESIVE, ALUMINUM-BACKED, ELECTRICALLY CONDUCTIVE |
| MIL-DTL-55661 Revision C:2002 | CONNECTOR, PLUG, ELECTRICAL UG-1870( )/U CONNECTOR, RECEPTACLE, ELECTRICAL UG-1837( )/U |
| MS75021 Revision E:2013 | CONNECTOR, RECEPTACLE, ELECTRICAL, - 12 CONTACT, INTERVEHICULAR, 28 VOLT, WATERPROOF |
| MIL-M-9983 Revision A:1967 | MULTIMETER, CLAMP ON |
| MIL-DTL-32362 Base Document:2010 | LIGHT, MARKER, CLEARANCE-BLACK |
| NASA HDBK 6003 : 2008 | APPLICATION OF DATA MATRIX IDENTIFICATION SYMBOLS TO AEROSPACE PARTS USING DIRECT PART MARKING METHODS/TECHNIQUES |
| MIL-B-85560 Base Document:1983 | BEARING, FIBER REINFORCED PLASTIC, SLEEVE, PLAIN AND FLANGED, SELF LUBRICATING GENERAL SPECIFICATION FOR |
| MIL-DTL-9370 Revision E:2007 | VALVE, AUTOMATIC, PRESSURE REGULATING, ANTI-G SUIT |
| MIL-DTL-25955 Revision A:2004 | CONNECTORS, ELECTRICAL, ENVIRONMENT RESISTING, MINIATURE, WITH SNAP-IN CONTACTS, OR HERMETICALLY SEALED WITH NON-REMOVABLE CONTACTS, GENERAL SPECIFICATION FOR |
| MIL M 7793 : F | METER, TIME TOTALIZING |
| MIL L 47178 : 0 | LENS, PLASTIC, OPERATION |
| GG-C-550 Revision B:1988 | COMPASS, DRAFTING, PIVOT, DROP SPRING BOW, PEN AND PENCIL, WITH CASE |
| MIL-C-12539 Revision B:1960 | CHARGER, BATTERY, METALLIC, POWER UNIT, PP-34/MSM |
| MIL-B-4042 Revision E:1986 | BORESCOPE ASSEMBLIES, CYLINDER INSPECTION |
| MIL H 3780 : C NOTICE 1 | HANGER AND TRACK SETS, HORIZONTAL SLIDING DOOR |
| MIL-T-52418 Revision B:1978 | TENSIOMETER, GAGE INDICATING |
| MIL-B-62098 Base Document:1968 | BULLDOZER, EARTH MOVING: TANK MOUNTING, M8A3 |
| MIL-S-62300 Base Document:1983 | SWITCH, PRESSURE |
| MIL-DTL-21097-18 Revision D:2005 | CONNECTORS, ELECTRICAL, PRINTED WIRING BOARD TOOL, CONTACT, REMOVAL, FOR TYPE CR CONNECTOR CONTACTS |
| MIL-A-25915 Revision A:1980 | ACCELEROMETER, AIRCRAFT, PILOTS WARNING, TYPE MA-2 |
| MIL F 83296 : 0 | FITTING, TETRAFLUOROETHYLENE HOSE, HIGH TEMPERATURE, HIGH PRESSURE (3,000 PSI HYDRAULIC AND PNEUMATIC) |
| MIL-S-20660 Revision C:1977 | STEREOSCOPE, LENS-PRISM-MIRROR, AERIAL PHOTOGRAPH INTERPRETATION (WITH BINOCULARS AND CASE) |
| MIL C 27889 : D | COMPUTER, TRANSDUCER, ALTITUDE, ALTITUDE ENCODING, CPU-46/A, GENERAL SPECIFICATION FOR AND MTU-38/A MOUNTING TRAY |
| MIL-C-19064 Revision B:1964 | CONNECTOR, OXYGEN HOSE TO REGULATOR |
| MIL-K-83525 Base Document:1985 | KIT, PORTABLE OPTICAL MICROSCOPE, MILITARIZED, 200X MAGNIFICATION FOR FIELD INSPECTION OF OPTICAL FIBERS |
| GG-M-2742 Base Document:1991 | METER, VOLUMETRIC, POSITIVE DISPLACEMENT, LIQUID, AIRCRAFT FUEL, 600 GPM |
| MIL-B-27049 Base Document:1962 | BOMB, LOADING PRACTICE BDU-15/E BOMB, LOADING PRACTICE BDU-16/E |
| MIL-C-43899 Revision A:1985 | COUPLING, EXTRACTION FORCE TRANSFER, PLATFORM |
| MIL-C-22896 Revision A:1968 | CONTACTOR |
| MIL-I-24739 Revision A:1991 | INFLATION ASSEMBLY, AUTOMATIC MANUAL, LIFE PRESERVER |
| MIL-L-5057 Revision F:1981 | LIGHT, INSTRUMENT, INDIVIDUAL, GENERAL SPECIFICATION FOR |
| MIL-C-7974 Revision D:1990 | CABLE ASSEMBLIES AND ATTACHABLE PLUGS, EXTERNAL ELECTRICAL POWER, AIRCRAFT, GENERAL SPECIFICATION FOR |
| MIL-V-27296 Revision C:1993 | VALVE, OXYGEN MASK, COMBINATION INHALATION AND EXHALATION |
| GG-T-621 Revision C:1985 | TRANSIT, ONE-MINUTE; AND TRANSIT TRIPODS |
| MIL-C-46793 Revision C:1992 | CUPOLA BODY ASSEMBLY FOR ARMORED VEHICLE BRIDGE LAUNCHER, M60A1 & M48A5 TANK CHASSIS |
| MIL-L-52325 Revision D:1988 | LAUNCHER, TRANSPORTER, BRIDGE M48A5 OR M60A1 TANK CHASSIS |
| MIL-PRF-32222 Revision A:2016 | HEATER, VEHICULAR COMPARTMENT MULTIFUEL BURNING 24 VOLT, DC 15,000 - 30,000 BTU/HR |
| MIL C 23806 : A | CABLE, RADIO FREQUENCY, COAXIAL, SEMIRIGID, FOAM DIELECTRIC - GENERAL SPECIFICATION FOR |
| MIL-DTL-22931 Revision D:2013 | CABLES, RADIO FREQUENCY, SEMIRIGID, COAXIAL, SEMI-AIR-DIELECTRIC, GENERAL SPECIFICATION FOR |
| MIL-I-23264 Revision A:1968 | INSULATORS, CERAMIC, ELECTRICAL AND ELECTRONIC, GENERAL SPECIFICATION FOR |
| MIL W 3903 : D | WIRE ROPE ASSEMBLY, SINGLE LEG |
| MIL-B-23272 Revision B:1970 | BATTERY, STORAGE: ALKALINE, NICKEL-CADMIUM |
| MIL-M-81957 Revision B:1990 | MOBILE TEST FACILITY, GAS TURBINE ENGINE TEST SYSTEMS - GENERAL SPECIFICATION FOR |
| MIL-W-23068 Base Document:1961 | WAVEGUIDES. RIGID. CIRCULAR. |
| MIL-T-45917 Revision A:1974 | TARGET MECHANISM, NIGHT FIRING, SMALL ARMS, M40 |
| MIL-I-85352 Base Document:1980 | INFLATOR ASSEMBLY AND GAGE ELEMENTS, PNEUMATIC PRESSURE REMOTE CONTROL, DIRECT READING |
| MIL-E-3677 Revision D:1993 | ERECTION EQUIPMENT FOR BRIDGE, FIXED, STEEL PANEL, BAILEY TYPE |
| MIL-C-52947 Revision B:1986 | COAGULANT, WATER TREATMENT: POLYELECTROLYTE, CATIONIC, LIQUID |
| MIL-C-83501 Revision A:1979 | CORD ASSEMBLIES, ELECTRICAL, BRAIDED AND MOLDED JACKET, GENERAL SPECIFICATION FOR |
| MIL-R-8592 Revision B:1965 | RESCUE EQUIPMENT, HELICOPTER [ASG] |
| MIL S 52028 : C | SWITCH, VEHICULAR IGNITION: WATERPROOF, STARTER AND MAGNETO, WITH DEGASSER CONTROL |
| MIL-DTL-3928-15 Revision G:2011 | SWITCHES, RADIO FREQUENCY TRANSMISSION LINE (COAXIAL) (ELECTRICALLY OPERATED) (OPTIONAL VENTING FOR SPACE APPLICATIONS) CLASS 5, 1P2T |
| MIL-DTL-5790 Revision H:2008 | Transmitter, Pressure, Oil, Synchro, 0-200 PSI 320-Degree Movement, 26V, Single Phase, 400 Cycles |
| MIL-M-5776 Revision C:1990 | MAINTENANCE PLATFORM, AIRCRAFT ADJUSTABLE, 13 TO 20 FEET TYPE B-2 |
| MIL-P-83037 Revision A:1968 | PLATFORM, CARGO, AERIAL DELIVERY A/E29H-1 |
| MIL-DTL-22520 Revision G:1997 | CRIMPING TOOLS, WIRE TERMINATION, GENERAL SPECIFICATION FOR |
| MIL-B-26994 Revision E:1992 | BALANCER, VEHICLE WHEEL, ON-VEHICLE TYPE |
| MIL-I-7723 Revision B:1965 | INDICATOR, TEMPERATURE, ELECTRICAL RESISTANCE, MULTIFUNCTION 70 DEG TO PLUS 150 DEG.C DUAL |
| MIL-C-81991 Base Document:1975 | CONVERTER, AIRCRAFT DC TO DC, BOOST GENERAL SPECIFICATION FOR |
| MIL-DTL-22612 Revision D:2015 | DETECTOR, COMBINED CONTAMINATED FUEL |
| SAE AS 7949 : 2004 | BEARINGS, BALL, AIRFRAME, ANTIFRICTION, GENERAL STANDARD |
| MIL-R-8573 Revision A:1957 | RESERVOIRS, AIR, NONSHATTERABLE STEEL |
| MIL-DTL-52471 Revision F:2008 | HOSE AND HOSE ASSEMBLIES, RUBBER, HYDRAULIC PRESSURE TYPE, GENERAL SPECIFICATION FOR |
| MIL E 83425 : 0 | EARCUP, SOUND PROTECTIVE MX-8376/AR GENERAL SPECIFICATION FOR |
| MIL-S-58095 Revision A:1986 | SEAT SYSTEM: CRASH RESISTANCE, NON-EJECTION, AIRCREW, GENERAL SPECIFICATION FOR |
| MIL-B-45081 Revision E:1991 | BLAST CLEANING MACHINE: SELF-CONTAINED TUMBLE TYPE, WITH DUST COLLECTOR |
| A-A-59918 Revision B:2014 | SELF PROPELLED CONCRETE SAW (SPCS) |
| MIL-L-44142 Revision A:1986 | LAUNDRY UNIT, TRAILER MOUNTED |
| MIL-DTL-44285 Revision A:2000 | DOORS, DOUBLE BUMP THROUGH |
| MIL-HDBK-785 Base Document:1990 | Design of Towed Artillery Weapon Systems |
| MIL-A-18717 Revision C:1993 | ARRESTING HOOK INSTALLATIONS, AIRCRAFT |
| MIL-A-83462 Base Document:1975 | ARCTIC CUSHIONS - CLOTHING, CHU-10/P AND CHU-11/P |
| MIL I 25137 : A | INDICATOR, AIRSPEED, MACH NUMBER AND MAXIMUM ALLOWABLE SPEED, TYPE ME-4 |
| MIL-C-26485 Revision D:1968 | CONTROL ASSEMBLY, ATTITUDE, GYROSCOPIC AF/A24G-1A |
| MIL-I-22126 Revision B:1972 | INDICATOR, TORQUEMETER, ENGINE, TURBOPROP |
| MIL-R-23761 Revision B:1975 | Regulators, Voltage, and Control Panels Aircraft, Direct Current Generator, General Specification for |
| MIL-STD-2039 Base Document:1992 | FIELD CHANGES & FIELD CHANGE KITS, PREPARATION OF |
| MIL-I-23366 Revision B:1987 | INDICATOR, HORIZONTAL SITUATION ID-1O13(*)/A |
| MIL I 83452 : LATEST | INDICATOR, TAPE TYPE, GENERAL SPECIFICATION FOR |
| MIL-I-27280 Revision A:1960 | INDICATOR, INDICATED AIRSPEED AVU-10/A |
| MIL-B-21331 Revision C:1967 | BOILER, STEAM, HIGH PRESSURE, WATER TUBE, FORCED CIRCULATION TYPE, AUXILIARY, NAVAL SHIPBOARD |
| MIL-I-55493 Revision A:1970 | IMAGE INTENSIFIER ASSEMBLY 40 MILLIMETER, MX-7856/UV |
| MIL-S-5944 Revision C:1990 | SLING, AIRCRAFT, GENERAL SPECIFICATION FOR |
| MIL-DTL-25446 Revision E:2012 | Transmitter, Temperature, Electrical Resistance, Armored, Bayonet Locking Type, (-50 Degrees C to 300 Degrees C) |
| MIL-G-45811 Revision D:1992 | GAGE, AIR, LOW PRESSURE, PNEUMATIC FLOATING EQUIPMENT |
| AA-V-200 Revision B Interim Revision:1973 | VENETIAN BLINDS |
| MIL A 25088 : C | |
| MIL-T-26639 Revision C:1969 | TESTER, TORQUE WRENCH |
| MIL-B-87167 Base Document:1985 | BELT, AIRCRAFT SAFETY, HBU-12/A |
| MIL-M-28519 Revision A:1984 | METER, VOLUMETRIC, POSITIVE DISPLACEMENT, LIQUID, AIRCRAFT FUEL, 6OO GPM |
| MIL-I-25861 Revision D:1967 | INDICATOR, PRESSURE, HYDRAULIC, 0-4000 PSI INTEGRALLY LIGHTED |
| MIL-F-13926 Revision B:1984 | FIRE CONTROL MATERIAL MANUFACTURE AND INSPECTION, GENERAL SPECIFICATION FOR |
| MIL H 87174 : 0 | HELMET, FLYERS' HGU-55/P |
| MIL-S-5804 Revision C:1967 | SEAT, AIRCRAFT, TROOP, WALL STYLE |
| MIL I 23145 : B | INFLATION ASSEMBLIES, LIFE PRESERVER |
| MIL-A-52879 Revision C:1992 | Alarm, Audible, BZ-204/FSS-9(V) (No S/S Document) |
| MIL-PRF-11021 Revision J:2016 | SWITCH, VEHICULAR LIGHTS: 28 VOLT DC |
| MIL-S-82567 Base Document:1968 | SPEED CONTROL ASSEMBLY LD546993 (FOR GUIDANCE CONTROL TEST SET MK 443 MOD O AND MOD 1) |
| MIL H 26499 : C | HOSE ASSEMBLY, METAL, FLEXIBLE, BREATHING OXYGEN |
| MIL C 25478 : B | COOLER, LUBRICATING OIL, AIRCRAFT ENGINE, SYNTHETIC OIL, GENERAL SPECIFICATION FOR |
| MIL-F-52847 Base Document:1975 | FILTER ELEMENT, FLUID PRESSURE, COALESCER, OILY WASTEWATER, EXPENDABLE, AND PREFILTER ELEMENTS, OILY WASTEWATER, EXPENDABLE |
| MIL H 62028 : A | HOSE, AIR DUCT, HIGH TEMPERATURE, FLEXIBLE, REINFORCED |
| MIL-B-45548 Revision D:1988 | BEAD BREAKER, PNEUMATIC TIRE, PORTABLE (TIRE SIZES 14.00-24 THROUGH 37.5-33) |
| MIL-C-13909 Revision C:1976 | CONDUIT, METAL, FLEXIBLE: ELECTRICAL SHIELDED |
| MIL S 44408 : B | SHELTER, NON-EXPANDABLE, RIGID WALL (67 INCHES HIGH BY 84 INCHES WIDE BY 102 INCHES LONG) |
| MIL-DTL-5794 Revision C:2006 | MICROPHONE UNIT M-6A/UR AND MICROPHONE, CARBON M-51/UR (CARBON NOISE CANCELING) |
| MIL-B-3402 Revision C:1984 | BLOWER, GASOLINE-DRIVEN, AIRCRAFT VENTILATION, PORTABLE 2,900 CFM TYPE A-2 |
| MIL-P-52405 Revision C:1990 | PUMPS, CENTRIFUGAL, ELECTRIC-MOTOR-DRIVEN (FOR WATER) |
| SAE AS 6302 : 2016 | TRANSMITTER, PRESSURE, FUEL, 0-600 PSI |
| W-T-631 Revision C:1961 | TRANSFORMER, POWER DISTRIBUTION |
| MIL S 51028 : B | SAMPLING AND GAGING KIT, PETROLEUM: PORTABLE |
| SAE AS 7365 : 2013 | Duct Assembly, Ground, Conditioned Air, Metallic Reinforced, Low Pressure, 350 °F |
| MIL M 2082 : C | METERS, FLOW, MECHANICAL, VOLUMETRIC POSITIVE DISPLACEMENT, LIQUID, COLD WATER AND HOT WATER TYPE, NAVAL SHIPBOARD USE |
| MIL-I-83751 Base Document:1967 | INDICATOR, SAFETY LEVEL, RF |
| MIL C 27715 : 0 | CIRCUIT BREAKER, TRIP-FREE, HIGH TEMPERATURE, AIRCRAFT GENERAL SPECIFICATION FOR |
| MIL-G-7734 Revision C:1981 | GAGE, PRESSURE ENGINE AND UTILITY AIRCRAFT |
| MIL-P-38027 Revision A:1973 | PRESSURE INDICATING SYSTEM, HYDRAULIC A/A27 J-1 |
| MIL-S-26716 Revision A:1982 | STAND, TEST, AIRCRAFT HYDRAULIC SYSTEMS, NON-PORTABLE |
| MIL-C-43369 Revision A:1976 | CONTAINER ASSEMBLY, SAMPLE AND SPECIMEN SHIPPING, BOX TYPE, FOR MEAT AND DAIRY PRODUCT SAMPLES. |
| MIL-R-14328 Revision B:1975 | RUBBER SHEET, SYNTHETIC, MEDIUM SOFT, GENERAL-PURPOSE GASKET MATERIAL (FOR EXTREME CLIMATIC CONDITIONS) |
| MIL-V-8965 Revision B:1990 | VALVE CORE, OXYGEN, HIGH PRESSURE |
| MIL-C-87150 Base Document:1980 | CLOTHING OUTFIT, EXTREME COLD WEATHER SURVIVAL A/P22S-18 |
| MIL-F-27656 Revision C:1987 | FILTER UNIT, FLUID, PRESSURE MXU-4O8/M, ABSOLUTE 5 MICRON, HYDRAULIC |
| MIL-A-10957 Revision G:1986 | ADAPTER KIT, GRAVITY FEED, FOR 5 GALLON MILITARY GASOLINE CAN AND 55 GALLON DRUM |
| MIL-C-27718 Revision D:1984 | CRANE, HYDRAULIC, TRUCK MOUNTED, A/S32A-16 16,5OO POUND CRANE CAPACITY, 6X4, DED |
| MIL-P-52455 Revision A:1970 | PIN REGISTER PUNCH BOARDS, PIN REGISTER BARS AND PIN REGISTER PLATES |
| MIL-C-5026 Revision F:1984 | CUTOUT RELAY, ENGINE GENERATOR |
| MIL-B-43308 Revision B:1969 | BINDING MACHINE, PLASTIC BINDING ELEMENT, AND PUNCHING MACHINE PAPER |
| MIL-S-43012 Revision C:1988 | SAMPLER, SOIL |
| MIL O 38338 : C (1) | OIL QUANTITY GAGING SYSTEM, CONTINUOUS TRANSISTORIZED NUCLEONIC, GENERAL SPECIFICATION FOR |
| MIL G 8348 : H | GAGE, ASSEMBLIES, AIR PRESSURE, DIAL INDICATING CHUCK TYPE SELF CONTAINED |
| MIL-A-25896 Revision E:1983 | ADAPTER, PRESSURE FUEL SERVICING, NOMINAL 2.5 INCH DIAMETER |
| MIL-C-172 Revision C:1958 | CASES: BASES, MOUNTING & MOUNTS, VIBRATION (FOR USE WITH ELECTRONIC EQUIPMENT) |
| MIL S 24251 : B | SHIELD, RETAINER (BASES), AND ADAPTERS, ELECTRON TUBE, HEAT DISSIPATING, GENERAL SPECIFICATION FOR |
| GGG-S-630 Revision D:1986 | SPREADERS, TIRE, PNEUMATICALLY OPERATED |
| MIL-PRF-27626 Revision G:2016 | SAMPLER, CRYOGENIC LIQUID |
| MIL-H-27269 Revision A:1977 | HORIZONTAL SITUATION INDICATOR GROUP AF A24J AND 1 |
| MIL-B-14563 Revision C:1983 | BOOTH, SPRAYING, DRY (BENCH TYPE WITH LEGS) |
| MIL C 19246 : C | CONNECTOR, OXYGEN MASK HOSE, TYPE MC-3A |
| MIL-A-18218 Revision B:1984 | ANALYZERS, FLUE-GAS, ORSAT-TYPE, PORTABLE |
| MIL-I-48634 Base Document:1986 | INTEGRATED CIRCUIT, DIGITAL, CMOS LOGIC ARRAY MONOLITHIC, SILICON |
| MIL-C-60618 Revision C:1989 | COUNTER, ROTATING, MECHANICAL, DIRECT DRIVE: 8587543 (3200 MIL RESET) |
| MIL-A-83136 Revision A:1990 | ARRESTING HOOK INSTALLATION, RUNWAY ARRESTING SYSTEM, AIRCRAFT, EMERGENCY |
| MIL H 53064 : A | HOSE ASSEMBLY, ELASTOMER, LIGHTWEIGHT, COLLAPSIBLE - LIQUID FUEL |
| MIL-D-44144 Revision A:1986 | DRYING TUMBLER, LAUNDRY |
| MIL-R-23057 Base Document:1961 | Regulator, Compressed Air, High Pressure (3500 PSI) |
| MIL-P-45377 Revision A:1980 | POWER SUPPLY. HIGH VOLTAGE, 24 VOLT DIRECT CURRENT |
| MIL I 62384 : A NOTICE 1 | INCLINOMETER, BALL STYLE |
| MIL-R-11019 Revision B:1955 | REEL UNIT RL&128 ()-G |
| MIL-T-43238 Revision C:1984 | TABLE, SHADOW, PARACHUTE CANOPY INSPECTION |
| MIL-C-43800 Revision A:1983 | COVER, PROTECTIVE, AIRDROP HARDWARE AND EQUIPMENT, GENERAL SPECIFICATION FOR |
| MIL C 7989 : B | COVER, LIGHT TRANSMITTING, FOR AERONAUTICAL LIGHTS, GENERAL SPECIFICATION FOR |
| MIL-T-20193 Revision D:1978 | TABLE, STEREOPLOTTER, PROJECTION: MULTIPLEX, WITH CHEST |
| MIL C 38618 : A | COUPLER, DRIVE ASSEMBLY GOVERNOR, FUZE BOMB MAU 87A B |
| MIL-C-38979 Revision A:1978 | Cartridge, Bomb Ejection CCU-1/B |
| MIL-DTL-28619 Revision D:1997 | ANCHORS, STATO MOORING, 200 TO 15,000 POUNDS |
| MIL I 5392 : A NOTICE 1 | INDICATOR, AIRSPEED PITOT STATIC TYPE K AND 3 |
| ABMA B3.2 : 1992 | AMERICAN NATIONAL STANDARD FOR ROLLING ELEMENT BEARINGS - AIRCRAFT ENGINE, ENGINE GEARBOX, AND ACCESSORY APPLICATIONS - SURFACE VISUAL INSPECTION |
| MIL-C-6499 Revision E:1970 | CLOCK, AIRCRAFT MECHANICAL TYPE A 13A |
| MIL D 38613 : A | DRIVE, ASSEMBLY, ARMING, BOMB FUZE, ATU-35B/B |
| MIL-S-14249 Revision C:1981 | STRAIGHTEDGE, RADIAL LINE, SLOTTED TEMPLET. |
| MIL-G-23723 Base Document:1964 | GYROSCOPE, RATE SWITCHING CN-495/AJB-3 |
| SAE AS 85352 : 2011 | INFLATOR ASSEMBLY AND GAGE ELEMENTS, PNEUMATIC PRESSURE, REMOTE CONTROL, DIRECT READING |
| MIL-DTL-45918 Revision A:2009 | CLEVISES AND CONNECTORS (ROD END) |
| DOD-HDBK-791 Base Document:1988 | MAINTAINABILITY DESIGN TECHNIQUES |
| MS27152 Revision C:2011 | SWITCH, PRESSURE-WARNING, LOW AIR PRESSURE, 60 PSI, SPST, WATERPROOF |
| MIL-PRF-83323 Revision D:2016 | TESTER, UNIVERSAL RECEPTACLE, AERIAL REFUELING |
| MIL-S-81771 Revision A:1975 | Seat System; Aircrew, Crash Resistant; General Specification for |
| MIL-I-25645 Revision D:1970 | INDICATOR, LIQUID OXYGEN QUANTITY, CAPACITANCE TYPE, GENERAL SPECIFICATION FOR |
| MIL-S-85508 Base Document:1981 | Spectacles, Aviator\'s, Neodymium Laser Protective, EDU-1/P (with case) |
| MIL-I-24768 Base Document:1992 | INSULATION, PLASTICS, LAMINATED, THERMOSETTING, GENERAL SPECIFICATION FOR |
| MIL G 23701 : 0 | MILITARY SPECIFICATION GYROSCOPE, RATE SWITCHING AN/ASN-52 |
| MIL S 38039 : B | SYSTEM, ILLUMINATED, WARNING, CAUTION, AND ADVISORY, GENERAL SPECIFICATION FOR |
| MIL-T-13057 Revision C:1981 | THERMOMETER, SELF-INDICATING, LIQUID-IN-GLASS (FOR PRECISION LEVEL ROD) |
| MIL-DTL-6508 Revision C:2011 | THERMOMETER, SELF-INDICATING, BIMETALLIC, GENERAL SPECIFICATION FOR |
| MIL-C-8412 Revision B:1969 | COMPASS, MAGNETIC, SLAVED GYRO, TYPE J-4 |
| MIL-DTL-52869 Revision C:1997 | SENSOR GROUP, PASSIVE ULTRASONIC: RECEIVER R-1860/FSS-9(V) AND PROCESSOR MX-9443/FSS-9(V) |
| MIL-P-52981 Base Document:1980 | PLANIMETER, POLAR, COMPENSATING, WITH CASE |
| MIL R 83055 : 0 | RAIN REPELLENT DISPENSING SYSTEMS, AIRCRAFT WINDSHIELD, GENERAL SPECIFICATION FOR |
| MIL-PRF-8622 Revision C:1997 | VALVE, HIGH-PRESSURE OXYGEN CYLINDER, AUTOMATIC OPENING |
| MIL-G-25667 Revision B:1970 | GLASS, MONOLITHIC, AIRCRAFT GLAZING |
| MIL-W-5908 Revision D:1973 | WIRE, ELECTRICAL, COPPER AND CONSTANTAN, THERMOCOUPLE |
| MIL-DTL-7965 Revision H:2015 | ANTENNA COMPONENTS: ANTIPRECIPITATION STATIC |
| MIL-STD-3028 Base Document:2009 | JOINT MODULAR INTERMODAL CONTAINER |
| MIL DTL 25627 : D | TRANSMITTER, SYNCHRO, ANGLE OF ATTACK OR SIDESLIP |
| MIL-DTL-45300 Revision C:2011 | CAP, FUEL TANK: FOR MILITARY COMBAT AND TACTICAL TRANSPORT VEHICLES |
| MIL-DTL-25561 Revision B:1995 | GRIP ASSEMBLY, CONTROLLER, AIRCRAFT, TYPE MC-2 |
| MIL I 8136 : A | INDICATOR, FUEL FLOW RATE, SYNCHRO STYLE, SINGLE CLAMP MOUNTED 2 INCH SIZE 300 TO 3,000 PPH TYPE A 12 |
| MIL-PRF-24021 Revision K:1998 | ELECTRIC POWER MONITORS, EXTERNAL, AIRCRAFT |
| MIL-R-9221 Base Document:1953 | RELAY, FIELD CONTROL, GENERATOR 24 VOLT DC TYPE M AND 2 |
| MIL-PRF-61002 Revision B:2008 | Labels, Pressure-Sensitive Adhesive, for Bar Coding |
| DEFSTAN 05-132/1(2017) : 2017 | MARKING OF SERVICE MATERIEL ITEMS USING A UNIQUE ITEM IDENTIFIER (UII) |
| MIL-DTL-32392 Revision A:2013 | AIRCRAFT ARRESTING SYSTEM - TEXTILE (TAAS) |
| MIL-F-45569 Revision C:1988 | FIXTURE, LATHE, METAL CUTTING |
| MIL L 12632 : D | LOUDSPEAKER, PERMANENT MAGNET (ENCASED, 2 WATT, FUNGUS, GUNBLAST, AND IMMERSION RESISTANT), GENERAL SPECIFICATION FOR |
| MIL A 9331 : A | ANTENNA AT-440A/U |
| MIL-DTL-13625-1 Revision C:2017 | SWITCHES, PULL; SWITCHES, PUSH; SWITCHES, BEAM SELECTING, HEADLIGHT: ELECTRICAL (28 VOLTS DC MAXIMUM, FOR MILITARY VEHICLES) |
| MIL-R-7051 Revision A:1966 | RELAY BANK, BOMB SALVO CIRCUIT 3 UNIT, 28 VOLT DC TYPE A 1 |
| MIL-A-81327 Revision A:1985 | ACOUSTIC LOCATING DEVICE (FOR TORPEDO MK 46 MOD O) |
| MIL-PRF-7032 Revision H:2010 | INVERTERS, AIRCRAFT, GENERAL SPECIFICATION FOR |
| GGG-N-350 Revision A:1959 | NIPPERS AND PINCERS |
| MIL-D-8181 Revision B:1965 | DETECTOR, ICE, AIR INTAKE DUCT, AIRCRAFT ENGINES AND AIRFRAME SYSTEMS GENERAL SPECIFICATION FOR |
| MIL-C-85256 Base Document:1981 | CARTRIDGE, IMPULSE, CCU-13/B |
| MIL-PRF-52955 Revision D:2009 | IMPROVED POSITION AND AZIMUTH DETERMINING SYSTEM (IPADS) |
| MIL-STD-2118 Base Document:1984 | FLEXIBLE AND RIGID FLEX PRINTED WIRING FOR ELECTRONIC EQUIPMENT DESIGN REQUIREMENTS FOR |
| MIL PRF 38804 : C | TIME COMPLIANCE TECHNICAL ORDERS - PREPARATION |
| MIL-DTL-7830 Revision E:2007 | LIGHT ASSEMBLY, MARKER, AIRCRAFT OBSTRUCTION |
| MIL-I-81023 Revision D:1985 | INDUCTOR, 28V, D.C. LABORATORY TEST GENERAL SPECIFICATION FOR |
| MIL-B-38977 Base Document:1968 | Bomb, Practice BDU-38/B |
| MIL I 6424 : A NOTICE 1 | INDICATOR, INDUCTION COMPASS, TYPE V 8 |
| MIL-DTL-24251 Revision F:2013 | SHIELDS, RETAINERS (BASES), AND ADAPTERS, ELECTRON TUBE, HEAT DISSIPATING, GENERAL SPECIFICATION FOR |
| MIL-DTL-83517 Revision B:2015 | Connector, Coaxial, Radio Frequency for Coaxial, Strip or Microstrip Transmission Line General Specification for |
| MIL-B-5046 Revision D:1968 | BOARD, CHART PLOTTING MARK 7 [ASG] |
| MIL I 26359 : B | INDICATOR, ATTITUDE, REMOTE ARU-4/A |
| MIL M 11495 : C | METER, DETERGENT CONCENTRATION, FOR DISHWASHING MACHINE |
| MIL-P-9389 Revision A:1987 | PUMP PRESSURE, OIL AND FREE AIR, TYPE MA AND 3 |
| MIL-DTL-58085 Revision C:2012 | Light, Beacon, Anti-Collision, Aircraft |
| MIL-I-27203 Revision B:1987 | INDICATOR, POSITION, WING FLAP |
| MIL-B-60410 Base Document:1966 | BLASTING MACHINE, HANDLE OPERATED, METAL CASE 10 CAP CAPACITY |
| MIL-G-83380 Base Document:1979 | GENERATOR SET, GAS TURBINE ENGINE DRIVEN, 30 AND 60 KW, 400 HZ |
| MIL-E-85583 Revision A:1987 | ELECTRIC POWER GENERATING CHANNEL, VARIABLE INPUT SPEED, ALTERNATING CURRENT, 400 HZ, AIRCRAFT, GENERAL SPECIFICATION FOR |
| SAE AS 8181 : 1997 | DETECTOR, ICE, AIR INTAKE DUCT, AIRCRAFT ENGINES AND AIRFRAME SYSTEMS, GENERAL SPECIFICATION FOR |
| MIL-S-52881 Revision B:1989 | SERVICING UNITS, COMPRESSED GAS, MOBILE |
| DOD-STD-35-128 Base Document:1978 | AUTOMATED ENGINEERING DOCUMENT PREPARATION SYSTEM, SWITCHES, REED |
| MIL-DTL-83507 Revision A:2017 | TOOL KITS, ELECTRICAL CONNECTORS, CONTACTS, AND CONNECTOR AND CABLE ACCESSORIES, GENERAL SPECIFICATION FOR |
| MIL-P-83126 Revision A:1980 | PROPULSION SYSTEMS, AIRCREW ESCAPE, DESIGN SPECIFICATION FOR |
| MIL-DTL-5070 Revision F:2006 | ADAPTER, HOSE TO TUBE, PIPE AND FLANGE, REUSABLE - HYDRAULIC, FUEL, AND OIL LINES, GENERAL SPECIFICATION FOR |
| MIL-C-28661 Revision A:1981 | CABLE, POWER, ELECTRICAL, HIGH VOLTAGE |
| MIL-DTL-27434 Revision B:2003 | ADAPTERS, CONNECTOR, COAXIAL, RADIO FREQUENCY, BETWEEN SERIES, GENERAL SPECIFICATION FOR |
| A-A-50304 Base Document:1987 | DYNAMOMETER, ENGINE RUN-IN, 500 HORSEPOWER CAPACITY |
| MIL P 81305 : A | POWER, DISTRIBUTION PANEL, ALTERNATING CURRENT, F-4 AIRCRAFT, SPECIFICATION FOR |
| OO-M-340 Revision F:2004 | MILLING, GRINDING, DRILLING, SLOTTING ATTACHMENT |
| MIL-T-19646 Revision A:1990 | THERMOMETER, REMOTE READING, SELF-INDICATING DIAL, GAS ACTUATED |
| MIL W 18445 : D | WINDOWS, NON-ICING, LAMINATED FLAT GLASS, ELECTRICALLY HEATED, WITH CONTROLS |
| MIL P 7034 : D | PULLEY, GROOVE, ANTIFRICTION BEARING, GREASE LUBRICATED, AIRCRAFT |
| MIL-S-13119 Revision E:1984 | SPREADER, SLING, PLATE TYPE, NONADJUSTABLE |
| MIL-P-85034 Base Document:1976 | POWER PACKAGE, EMERGENCY AC/DC GENERATOR, RAM AIR TURBINE DRIVEN |
| MIL-B-85584 Revision B:1995 | BATTERY RELAY CONTROL UNIT, AIRCRAFT |
| O-F-506 Revision C:1987 | FLUX, SOLDERING; PASTE AND LIQUID |
| MIL-D-9898 Revision C:1986 | DRAWING, TUBE BEND |
| MIL-DTL-7989 Revision C:2006 | COVERS, LIGHT - TRANSMITTING, FOR AERONAUTICAL LIGHTS, GENERAL SPECIFICATION FOR |
| MIL-A-28896 Base Document:1985 | ANTENNA, TRANSMISSION LINE, AS-3437/BRC |
| MIL S 437 : D (1) | |
| MIL-DTL-9415 Revision B:2007 | DYNAMIC LOUDSPEAKER LS-184A/AIC-10 |
| MIL-G-49313 Base Document:1989 | GOGGLES, NIGHT VISION |
| MIL-R-8373 Revision A:1954 | RELAY, CURRENT TYPE D 1 [115 VOLTS 400 CYCLE SINGLE POLE] |
| MIL T 9195 : A NOTICE 2 | TRANSMITTER, INDUCTION COMPASS, STABILIZED, TYPE MG 1 |
| MIL S 27626 : F | SAMPLER, CRYOGENIC LIQUID |
| MIL H 83797 : 0 | HOSE, RUBBER, LIGHTWEIGHT, MEDIUM PRESSURE, GENERAL SPECIFICATION FOR |
| MIL-F-23447 Base Document:1962 | FIRE WARNING SYSTEMS, AIRCRAFT, RADIATION SENSING TYPE, TEST AND INSTALLATION OF |
| MIL-DTL-1407 Revision D:2009 | PIN SET, MARKING, LAUNDRY |
| MIL-DTL-11040 Revision G:2009 | BELT, V: ENGINE ACCESSORY DRIVE, GENERAL SPECIFICATION FOR |
| MIL-B-63354 Revision A:1987 | |
| MIL-T-38306 Base Document:1964 | TRANSMITTER, RATE GYROSCOPE T 970/AJB - 7 |
| MIL-B-26026 Revision B:1967 | BATTERY, STORAGE, AIRCRAFT, TYPE MA-2-1 |
| MIL-S-29411 Revision B:1988 | SHELTER ASSEMBLIES, 10 FOOT AND 20 FOOT ELECTROMAGNETIC INTERFERENCE |
| MIL-D-43699 Revision C:1987 | DRUMS, FABRIC, COLLAPSIBLE, (DRINKING WATER, 55-,250- & 500 GALLON CAPACITIES) |
| MIL-C-13516 Revision E:1979 | CIRCUIT BREAKERS; MANUAL AND AUTOMATIC (28 VOLTS) |
| MIL S 12285 : D | SWITCH, THERMOSTATIC |
| MIL-I-81969-14 Revision C:1987 | INSTALLING AND REMOVAL TOOLS, CONNECTOR ELECTRICAL CONTACT, TYPE 3, CLASS 2, COMPOSITION B |
| MIL-DTL-62099 Revision D:1998 | TRANSMISSION, HYDRAULIC: MODIFIED AUTOMATIC TX-100-1 |
| SAE ARP 1835 : 2013 | PREPARATION FOR DELIVERY, GENERAL REQUIREMENTS FOR HOSE ASSEMBLIES |
| MIL L 62548 : 1987 | LEAD, IGNITION |
| MIL V 12125 : F | VALVE, GATE, QUICK-OPENING, CLASS 125, CAST IRON, WITH POSITION LOCK |
| MIL-DTL-38449 Revision D:2010 | SIGNAL AND SIGNAL/INTERCOMMUNICATION AMPLIFIERS, UNIVERSAL, AERIAL REFUELING |
| MIL C 5500 : D | CAPS, HIGH PRESSURE AIR VALVE |
| MIL L 7961 : C | LIGHT, INDICATOR, PRESS TO TEST |
| MIL V 9050 : E (1) | VALVE, OXYGEN, PRESSURE RELIEF, AIRCRAFT |
| JSSG-2010-12 Base Document:1998 | Crew Systems Deployable Aerodynamic Decelerator (DAD) Systems Handbook |
| MIL-E-38453 Revision A:1971 | ENVIRONMENTAL CONTROL, ENVIRONMENTAL PROTECTION, AND ENGINE BLEED AIR SYSTEMS, AIRCRAFT, GENERAL SPECIFICATION FOR |
| MIL-S-52156 Revision D:1988 | SURVEYING INSTRUMENT, DISTANCE MEASURING, ELECTRONIC MICROWAVE |
| MIL-DTL-10986 Revision G:2007 | INDICATORS AND TRANSMITTERS: LIQUID, TEMPERATURE AND PRESSURE |
| MIL-DTL-5904 Revision E:2010 | LIGHT, RUNWAY MARKER, ELEVATED, TYPE C-1 |
| MIL-T-53029 Revision C:1994 | TANKS, FABRIC, COLLAPSIBLE, 10,000 20,000 AND 50,000 GALLON, DRINKING WATER |
| MIL-DTL-62548 Revision C:2010 | LEAD, IGNITION |
| MIL-B-13207 Revision D:1976 | BODY, VAN, VEHICLE-MOUNTED, GENERAL SPECIFICATION FOR |
| MIL-HDBK-514 Base Document:2003 | OPERATIONAL SAFETY, SUITABILITY, & EFFECTIVENESS FOR THE AERONAUTICAL ENTERPRISE |
| MIL V 25675 : B | VALVE, CHECK, MINIATURE, HYDRAULIC, AIRCRAFT AND MISSILE |
| GGG-A-825 Revision A:1967 | AUGER MACHINE, PIPE AND SEWER, POWER OPERATED |
| MIL-C-1476 Revision G:1988 | CREEPERS, ICE |
| MIL-T-10540 Revision D:1978 | TRACING TABLE, STEREOPLOTTER, PROJECTION, WITH CASE |
| MIL-T-38760 Base Document:1966 | TENSIOMETER DIAL INDICATING |
| MIL-L-81561 Revision G:1994 | LIFE PRESERVER ASSEMBLIES, INFLATABLE, AIRCREWMEN AND PASSENGER, CEMENTED AND HEAT SEALED |
| MIL-S-10987 Revision E:1991 | SCALE, PLOTTING, COORDINATE (ALUMINUM, SQUARE, 1,25,000 SCALE AND 1,50,000 SCALE, GRADUATED IN METERS AND YARD) |
| GGG-T-20 Revision B:1964 | TACKER, STAPLE, (COMPRESSION TYPE, MANUALLY OPERATED), AND STAPLE, TACKER |
| MIL-C-11418 Revision H:1992 | CLAMPS, LEAK REPAIR, PIPE COUPLING; FOR USE OVER GROOVED-TYPE COUPLINGS |
| MIL-A-0083216 Revision C:1976 | AIR CONDITIONER, HORIZONTAL, 54,000 BTUH, 208/230 V |
| MIL A 8897 : A | ACCUMULATORS, HYDRAULIC CYLINDRICAL, 3,000 PSI AIRCRAFT TYPE 11 SYSTEMS |
| MIL I 6856 : C | INDICATOR, PRESSURE SYNCHRO 1 1/2 INCH |
| MIL-A-62247 Base Document:1989 | ARMORED RECONNAISSANCE, AIRBORNE ASSAULT VEHICLE: FULL TRACKED, 152 MM, M551 AND M551A1 (W/LASER RANGE FINDER) (OVERHAUL) |
| MIL B 62284 : 0 | BLOWER ASSEMBLY, AIR CLEANER |
| MIL C 25369 : C | CYLINDER, CARBON DIOXIDE, FOR INFLATION OF PNEUMATIC LIFE PRESERVERS |
| MIL D 22706 : F | DUCT AND SCUFF COVER, PNEUMATIC, FLEXIBLE |
| MIL-S-64055 Base Document:1994 | SHOP EQUIPMENT, MECHANICAL MAINTENANCE, SHELTER MOUNTED, EXPANDABLE |
| MIL-S-12928 Revision H:1993 | SEPARATOR, OIL AND WATER, COMPRESSED AIR |
| MIL C 18388 : C | COIL, TUBE DEFLECTION, AND COILS, TUBE FOCUSING |
| MIL-A-62463 Revision B:1992 | ACTUATOR ASSEMBLY, ROTARY |
| MIL-A-52363 Revision C:1991 | AIR CLEANERS, INTAKE: DRY-TYPE (FOR INTERNAL-COMBUSTION ENGINE) |
| MIL-DTL-24788 Revision B:2017 | Coupling Assembly, Semi-Dry-Break, Quick-Disconnect Fuel, with or without Continuity Switch |
| MIL-C-52974 Base Document:1983 | CRANE, WHEEL MOUNTED, HYDRAULIC, LIGHT 7-1/2 TON |
| GGG-G-770 Revision B:1973 | GUN, AIR BLOW, (BLAST CLEANING) |
| MIL P 20664 : C NOTICE 3 | PLANIMETER, POLAR, COMPENSATING, WITH CASE |
| MIL-I-27247 Revision C:1985 | INDICATOR, TEMPERATURE, SYNCHRO |
| MIL-D-81227 Revision B:1976 | DETECTOR KIT, WATER, AUTOMOTIVE, AVIATION FUEL |
| MIL-B-51254 Base Document:1966 | BREATHING APPARATUS, OXYGEN GENERATING, M20 |
| MIL-A-27198 Revision B:1987 | ALTIMETER, PRESSURE AAU-7/A |
| MIL C 85052 : A | CLAMP LOOP, CUSHION, GENERAL SPECIFICATION FOR |
| MIL-C-9075 Revision A:1968 | COMPUTER AND TRANSMITTER, TRUE AIRSPEED, PITOT STATIC, 150-900 KNOTS, TYPE MA 1 |
| MIL-D-53025 Revision A:1985 | DETECTING SET, MINE, PORTABLE, METALLIC & NONMETALLIC AN/PRS-8 |
| MIL-A-11610 Revision B:1959 | ADAPTER, LINE, FILLING, 1-TON CONTAINER, M1 |
| H-B-621 Revision F:1958 | BRUSH, STENCIL |
| MIL-F-46851 Revision C:1993 | FAN, GUIDED MISSILE, GROUND SUPPORT EQUIPMENT, GENERAL SPECIFICATION FOR |
| MIL-T-52943 Base Document:1978 | TANK, FABRIC, COLLAPSIBLE, PILLOW TYPE (FOR POTABLE WATER) |
| MIL-I-52172 Revision C:1983 | INSULATION BATT, NYLON THERMAL |
| MIL-DTL-7905 Revision H:2003 | CYLINDERS, STEEL, COMPRESSED GAS, NON-SHATTERABLE, SEAMLESS, 1800 PSI AND 2100 PSI |
| MIL H 62430 : 0 | HARNESS ASSEMBLY, THERMOCOUPLE |
| MIL-R-11804 Revision E:1965 | RESISTOR, FIXED, FILM (POWER TYPE), GENERAL SPECIFICATION FOR |
| MIL-C-52705 Revision B:1994 | COUPLING, HOSE STEAM |
| MIL-I-23062 Base Document:1961 | IGNITER, MARK 247 MD O |
| MIL-P-236 Revision J:1992 | PIPE, CULVERT, NESTABLE |
| MIL-I-38391 Base Document:1965 | INDICATOR, ELECTRICAL TACHOMETER, ERU-12/A 0-350 RPM (ROTOR), 0-7000 RPM (ENGINE) |
| MIL A 83419 : C | ALTIMETER, SERVO CONTROLLED, AUTOMATIC PRESSURE STANDBY |
| MIL C 62122 : B | CABLE ASSEMBLY, SLAVE, ELECTRICAL, CONNECTORS, PLUG, AND RECEPTACLE |
| MIL V 47306 : B | VALVE, STOP LIFT CHECK |
| MIL-B-2213 Revision D:1992 | BRIDGE CONVERSION SET, FIXED BRIDGE: BAILEY; CONSTRUCTION OF ONE PANEL CRIB PIER, 31 FEET 7 INCHES HIGH, 145-TON |
| MIL A 85046 : 0 | ACTUATOR, LINEAR ELECTROMECHANICAL |
| DSCC 87019 : G | INDICATOR ASSEMBLIES, IR SECURE LIGHTING; RED, YELLOW, GREEN; PANEL SEALING |
| MIL-C-11218 Revision E:1988 | CONVEYORS, ROLLER AND WHEEL, GRAVITY AND CONVEYER SUPPORTS |
| MIL-W-25913 Base Document:1957 | WAVEGUIDE, RIDGED ASSEMBLIES, FLEXIBLE AND RIGID, GENERAL SPECIFICATION FOR |
| MIL P 83206 : B | PITOT STATIC TUBE, L SHAPED, COMPENSATED, GENERAL SPECIFICATION FOR |
| MIL-DTL-7793 Revision H:2016 | METER, TIME TOTALIZING |
| MIL-I-26860 Revision B:1972 | INDICATOR, HUMIDITY, PLUG, COLOR CHANGE |
| MIL-A-22165 Base Document:1959 | AMPLIFIER, COMPASS, SERVO (TYPE MF-1 COMPASS) |
| MIL-C-52988 Revision A:1987 | CHAMBER, DECOMPRESSION, DIVERS, 100 PSI |
| GGG-E-926 Revision B:1963 | EXTRACTOR; COTTER-PIN |
| MIL C 12386 : E | CLAMP, REPAIR, PIPE: WITH GASOLINE-RESISTANT GASKET, GENERAL SPECIFICATION FOR |
| MIL S 13789 : D | STRAINER, SEDIMENT, PIPELINE, BASKET TYPE |
| MIL-S-11716 Revision D:1993 | SUPERSTRUCTURE, STEEL, FOR BRIDGE, FLOATING, PNEUMATIC FLOAT, CLASS 60 |
| MIL V 87255 : 0 | VALVE, PRESSURE, ANTI-G SUIT, HIGH FLOW |
| MIL P 3627 : D | PENETROMETER, SOIL, DIAL INDICATING [TWO CONES] AND SPRING INDICATING [AIRFIELD CONE] |
| MIL-T-8652 Revision A:1959 | TIEDOWN, CARGO, AIRCRAFT, 5,000 LB CAPACITY, TYPE MC 1 |
| MIL A 3933 : E | ATTENUATORS, FIXED GENERAL SPECIFICATION FOR |
| SAE ARP 1070E : 2019 | DESIGN AND TESTING OF ANTISKID BRAKE CONTROL SYSTEMS FOR TOTAL AIRCRAFT COMPATIBILITY |
| MIL-R-24414 Revision D:1991 | REEL, HOSE, FIRE FIGHTING, MANUALLY OPERATED |
| MIL-C-52093 Revision D:1991 | CRADLE, PONTOON BOAT, HALF SECTION, ALUMINUM HULL |
| MIL-T-425 Revision J:1994 | TUBE, STEEL: PIPELINE SECTION; WITH GROOVED NIPPLE WELDED ON EACH END |
| GGG-S-62 Revision D:1986 | SAW, CHAIN, PORTABLE, POWER |
| MIL-A-52818 Base Document:1974 | ANCHOR, GUY: SHIELD, EXPANSION |
| MIL-C-47200 Base Document:1974 | WIRE AND CABLE, ELECTRICAL, SINGLE CONDUCTOR, TWISTED PAIRS AND MULTICONDUCTOR SHIELDED AND JACKETED, HIGH TEMPERATURE |
| GGG-B-101 Revision D:1963 | BAR, CHISEL, PINCH, PRY, WRECKING, DIGGING, TRAMPING, DIGGING AND TRAMPING, AND CROWBAR |
| MIL-P-11859 Revision H:1991 | PONTON BOATS, ALUMINUM, FOR FLOATING FOOTBRIDGE |
| MIL-B-52088 Revision F:1992 | BRIDGE, ARMOURED VEHICLE LAUNCHED, SCISSORING TYPE, CLASS 60, ALUMINUM, 60 FOOT SPAN |
| MIL-A-23899 Revision B:1984 | AURAL PROTECTOR, SOUND |
| MIL-P-85573 Base Document:1983 | POWER UNIT AIRCRAFT AUXILIARY, GAS TURBINE, GENERAL SPECIFICATION FOR |
| MIL D 81544 : A | DISPENSER, PARACHUTE FLARE, SUU-44/A |
| MIL-A-58005 Revision B:1983 | ANCHOR, MARINE, MUSHROOM: CAST STEEL, 5,000 LB, NOMINAL WEIGHT |
| MIL-I-8404 Revision A:1953 | INDICATOR, PRESSURE, SINGLE 0 TO 35 PSI FUEL PRESSURE TYPE C 33 |
| MIL I 7491 : B | INDICATOR RATE OF FLOW, FUEL TOTALIZING, SERVO STYLE, TYPE F 1 |
| MIL-I-21685 Base Document:1958 | INDICATOR, COMPASS REPEATER, ROTATING DIAL, TYPE MW-2 |
| MIL-W-26217 Revision B:1985 | WINCH, DRUM, POWER OPERATED AF E24H 1, CARGO LOADING, 4OOO POUND CAPACITY, VARIABLE SPEED, 28V DC PORTABLE |
| MIL-T-12839 Revision D:1981 | THERMOMETER, SELF-INDICATING, LIQUID IN GLASS, BASE LINE TAPE, WITH CASE. |
| MIL A 25676 : D | ADAPTOR, PRESSURE LUBRICATING OIL SERVICING, AIRCRAFT |
| AA-F-00300 Base Document:1965 | FILE, ROLL DRAWING |
| MIL-A-27261 Revision A:1966 | ACCELEROMETER, AIRCRAFT |
| MIL-C-11743 Revision F:1989 | CASE, MAINTENANCE AND OPERATIONAL MANUALS |
| MIL-STD-1473 Revision B:1990 | STANDARD GENERAL REQUIREMENTS FOR COLOR AND MARKING OF ARMY MATERIAL |
| AA-S-704 Revision A:1971 | STOOL, STEP, CASTER MOUNTED, SAFETY |
| DSCC 11003 : 0 | PRINTED WIRING BOARD, FLEXIBLE, TYPE 3 (MULTILAYER) WITH PLATED THROUGH HOLES, WITH OR WITHOUT STIFFENER |
| MIL-A-81403 Base Document:1967 | ALTIMETER-ENCODER, AAU-21/A |
| MIL-I-81400 Base Document:1966 | INSTRUMENT, AIRCRAFT, GENERAL SPECIFICATION FOR |
| MIL-PRF-32233 Revision B:2015 | TANKS, COLLAPSIBLE, 3,000, 10,000, 20,000, 50,000, & 210,000 U.S. GALLONS, FUEL |
| SAE AS 604 : 2012 | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, METALLIC REINFORCED, 3000 PSI, 400 DEGREES F, HEAVYWEIGHT, HYDRAULIC |
| SAE AS 1339 : 2017 | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, METALLIC REINFORCED, 3000 PSI, 400 DEGREES F, LIGHTWEIGHT, HYDRAULIC AND PNEUMATIC |
| SAE ARP 1070 : 2014 | DESIGN AND TESTING OF ANTISKID BRAKE CONTROL SYSTEMS FOR TOTAL AIRCRAFT COMPATIBILITY |
| SAE AS 5498 : 2017 | MINIMUM OPERATIONAL PERFORMANCE SPECIFICATION FOR INFLIGHT ICING DETECTION SYSTEMS |
| SAE AS 1227 : 2013 | HOSE ASSEMBLY, CONVOLUTED POLYTETRAFLUOROETHYLENE, METALLIC REINFORCED, LOW PRESSURE, UP TO 400 DEGREES F, AIRCRAFT |
| SAE AS 4897 : 1994 | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE (PTFE), LOW PRESSURE, 450 DEGREES F AND FIREPROOF, PROCUREMENT SPECIFICATION FOR |
| ASTM F 2430 : 2004 : R2012 | Standard Specification for Bearing, Roller, Needle: Assembly (Thick Outer Race) |
| SAE MA 1975 : 2015 | HOSE ASSEMBLIES, POLYTETRAFLUOROETHYLENE, ARAMID REINFORCED, 135 DEGREE C, STANDARD DUTY, 28000/21000 KPA, HYDRAULIC, AIRCRAFT SYSTEMS |
| ASTM E 2631 : 2009 : R2015 | Standard Practice for Physical Placement of an Entity-Controlled Supplemental Identification Label |
| ASTM F 2332 : 2006 : R2013 | Standard Specification for Annular Ball Bearings for Instruments and Precision Rotating Components |
| SAE ARP 4763 : 2017 | AEROSPACE - GENERAL REQUIREMENTS FOR HYDRAULIC RELIEF VALVES |
| ASTM F 2162 : 2001 : EDT 1 | Standard Specification for Bearing, Roller, Needle: Drawn Outer Ring, Full Complement, Without Inner Ring, Open and Closed End, Standard Type |
| ASTM F 2163 : 2001 : R2016 | Standard Specification for Ring, Bearing, Inner: for Needle Roller Bearing With Drawn Outer Ring |
| ASTM F 1347 : 1991 : R2018 | Standard Specification for Manually Operated Fueling Hose Reels |
| ASTM F 2162 : 2001 : R2008 | Standard Specification for Bearing, Roller, Needle: Drawn Outer Ring, Full Complement, Without Inner Ring, Open and Closed End, Standard Type |
| MIL-DTL-9398 Revision D:2007 | GENERATOR, TACHOMETER, TWO-POLE, HIGH TEMPERATURE, AIRCRAFT |
| MIL-DTL-29576 Revision B:2007 | CYLINDERS, STEEL, COMPRESSED GAS, NON-SHATTERABLE, WELDED |
| MIL S 13735 : D | SWITCH, TOGGLE, 28 VOLT DC |
| MIL E 53126 : 0 | ELECTRICAL DISTRIBUTION EQUIPMENT |
| MIL-A-27582 Revision A:1963 | ADAPTER, TEST MX-6050/PSM-6 |
| PD IEC/TS 62668-1:2016 | Process management for avionics. Counterfeit prevention Avoiding the use of counterfeit, fraudulent and recycled electronic components |
| MIL-W-8982 Revision D:1989 | WRENCHES, SPLINED, HIGH STRENGTH, THIN WALL, GENERAL SPECIFICATION FOR |
| MIL-W-45844 Revision D:1987 | WELDING MACHINE, RESISTANCE, SPOT & TYPE PORTABLE (AUTOMOTIVE REPAIR) |
| MIL-A-13092 Revision G:1990 | ADAPTER SET, ENGINE ELECTRICAL TEST |
| MIL-F-14052 Revision C:1970 | FIBER ROPE ASSEMBLY, SINGLE LEG |
| SAE AS 8568 : 2012 | BINOCULARS, PRISMATIC, HAND-HELD (FOR AERONAUTICAL USE) (7 X 50 AND 6 X 42 (WIDE FIELD)) |
| MIL-T-81187 Base Document:1966 | TRANSMITTER, RATE OF FUEL FLOW, SYNCHRO TYPE MS90361 |
| MIL-DTL-55116-2 Revision B:2004 | Connector, Plug, Six Pin Audio, Crimp Sleeve Terminals, Wire Strain Relief, U-229 Type |
| MIL L 45194 : G | LINK, CARTRIDGE, METALLIC BELT, 20MM: M14A2 |
| MIL-DTL-3992 Revision F:2007 | HOSE AND HOSE ASSEMBLY, RUBBER, AIR AND VACUUM BRAKE, SYSTEMS |
| MIL-T-8598 Revision B:1990 | TRANSMITTER, TEMPERATURE, ELECTRICAL RESISTANCE, FLUSH-MOUNTED, FREE AIR |
| MIL-I-25120 Revision C:1993 | INDICATOR, INSTRUMENT LANDING, AIRPORT RUNWAY |
| GGG-B-490 Revision F:1992 | BLOCKS, TACKLE (MANILA AND NYLON ROPE) |
| MIL S 4510 : E | SPOTLIGHT, INCANDESCENT, ROOF MOUNTED, AUTOMOTIVE |
| MIL-F-8378 Revision B:1975 | FREQUENCY METERS, AIRCRAFT 380 TO 420 HERTZ AND 350 TO 450 HERTZ |
| MIL-PRF-43001 Revision G:2016 | WASHER-EXTRACTORS, LAUNDRY, COMMERCIAL |
| MIL H 85800 : 0 | HOSE ASSEMBLIES, POLYTETRAFLUOROETHYLENE, ARAMID FIBER REINFORCED, 5000 & 8000 PSI, GENERAL SPECIFICATION FOR |
| MIL-STD-648 Revision E:2016 | Specialized Shipping Containers |
| MIL-H-11689 Revision C:1974 | HAMMER, PNEUMATIC, PORTABLE, NAIL-DRIVING |
| MIL-C-13962 Revision B:1966 | CRUSHING, SCREENING, AND WASHING PLANTS, DIESEL-ENGINE AND ELECTRIC-MOTOR DRIVEN, 225-TONS PER HOUR |
| MIL-A-25933 Revision B:1985 | ALTIMETER, PRESSURIZED COMPARTMENT, INTEGRALLY LIGHTED 0-50,000 FEET, 1-7/8 INCH DIAL |
| MIL-P-1680 Revision D:1982 | POUCH, KNIFE, MEATCUTTERS, AND STEEL HOLDER [FOR BELT ATTACHMENT] |
| MIL-F-8615 Revision D:1976 | FUEL SYSTEM COMPONENTS, GENERAL SPECIFICATION FOR [ASG] |
| MIL W 12065 : D | WINCHES, DRUM, HAND OPERATED; SPUR GEAR, 2 OR 3 PURCHASE |
| MIL-T-27-233 Base Document:1978 | TRANSFORMERS AND INDUCTORS (AUDIO POWER AND HIGH POWER PULSE) INDUCTOR CHARGING TF5S37ZZ |
| MIL-R-45906 Revision D:1984 | RELEASE, TWO POINTS - SINGLE PULL, PARACHUTIST'S EQUIPMENT PACK |
| MIL-A-45559 Revision B:1967 | ARMORED RECONNAISSANCE/AIRBORNE ASSAULT VEHICLE: FULL TRACKED, 152 MM, M551 |
| MIL-A-43146 Revision B:1985 | ACCESSORY SET, PARACHUTE, SCUBA ADAPTING |
| MIL-DTL-25867 Revision D:2006 | GAGE, PRESSURE, DIAL INDICATING, PNEUMATIC |
| MIL-A-52019 Revision C:1991 | ADAPTER ASSEMBLY, GLIDE ANGLE LIGHT TO STAKE OR CONE |
| MIL-T-11752 Revision B:1961 | TENSION HANDLE, STEEL MEASURING TAPE, SURVEY'S |
| MIL-DTL-22706 Revision G:1997 | DUCT AND SCUFF COVER, PNEUMATIC, FLEXIBLE |
| MIL C 3643 : A | CONNECTOR, COAXIAL RADIO FREQUENCY, SERIES HN ASSOCIATED FITTINGS GENERAL SPECIFICATION FOR |
| MIL-I-25479 Revision A:1987 | INDICATOR, MACH NUMBER, SENSITIVE, SERVOED, RANGE .5 TO 1.O, TYPE ME-5 |
| MIL C 87148 : 0 | CLOTHING OUTFIT, EXTREME COLD WEATHER SURVIVAL A/P22S-14 |
| MIL-I-545 Revision B:1976 | INSULATION SHEET, ELECTRICAL, PAPER, PRESSBOARD |
| GGG-D-691 Revision B:1962 | DRILL, MASONRY, HAND AND HOLDER, MASONRY DRILL, HAND |
| MIL-B-1962 Revision C:1985 | BUCKLES, END, 1-INCH |
| MIL-L-81787 Revision B:1983 | Life Preserver, Inflatable, Utility, Type LPP-1A |
| MIL-S-29594 Base Document:1992 | SPECTACLES, AVIATOR'S, SEVEN WAVELENGTH LASER EYE PROTECTIVE |
| MIL-A-26360 Revision B:1982 | AMPLIFIER, ELECTRONIC CONTROL ASU-3/A |
| MIL-A-27330 Revision B:1987 | ACCELEROMETER, ELECTRICAL, LINEAR TRU-3/A |
| MIL-B-4173 Revision B:1969 | BENCH, WORK, GENERAL PURPOSE |
| GG I 492 : A | INDICATOR, SIGHT LIQUID |
| MIL-S-21433 Revision A:1959 | SOCKETS, TURNBUCKLES, AND TURNBUCKLE ASSEMBLIES - WIRE ROPE, WEDGE AND THREADED LOCK SLEEVE |
| MIL-DTL-25547 Revision C:2002 | LOUDSPEAKER, PERMANENT MAGNET LS-211/AIC-13 |
| MIL-A-516 Revision J:1981 | AUGER, EARTH, SKIDMOUNTED; AND AUGER, EARTH, TURNTABLE BASE MOUNTED, POWER DRIVEN |
| AA-S-81 Revision B:1962 | SAFES, OFFICE, FIRE RESISTANT, BURGLARY PROTECTION |
| MIL D 26392 : C | DUMMY CONVERTERS, LIQUID OXYGEN INDICATOR SYSTEM 10 LITER CRU-23/A AND 25 LITER CRU-24/A |
| MIL-W-44027 Revision A:1980 | WEDGE KIT, RAMP BUNDLE DELIVERY SYSTEM, C-130 AIRCRAFT |
| MIL-T-26609 Revision C:1994 | TRANSMITTER, POSITION |
| MIL-I-43684 Revision B:1989 | INTRENCHING TOOL, HAND, FOLDING, LIGHTWEIGHT, AND CARRIER |
| MIL-H-23799 Base Document:1963 | HOSE ASSEMBLY, METAL, TRANSFER, LIQUID OXYGEN |
| MIL-G-58103 Base Document:1979 | GRIP ASSEMBLY, CYCLIC CONTROLLER, HELICOPTER |
| MIL V 9439 : D | VALVE, OXYGEN, CYLINDER, HIGH PRESSURE |
| MIL-T-27730 Revision A:1964 | TAPE, ANTISEIZE, POLYTETRAFLUOROETHYLENE, WITH DISPENSER |
| MIL-C-10541 Revision D:1978 | COOLING UNIT, STEREOPLOTTER PROJECTION |
| MIL-M-85255 Base Document:1981 | MOTOR, HOT GAS (MAU-132A/B) |
| MIL C 17850 : A | COMPASS MAGNETIC, CARD, POCKET, TYPE MC-1 |
| MIL-C-26637 Revision A:1987 | CONNECTORS, COAXIAL, RADIO FREQUENCY, SERIES LT |
| MIL-I-7085 Revision C:1994 | INDICATOR, PRESSURE, ENGINE, 0-50 PSI |
| MIL-DTL-12216 Revision D:2007 | REFLECTOR, LIGHT: ALUMINUM, AND SHIELD, LIGHT: TELESCOPING, ALUMINUM |
| MIL-I-21718 Base Document:1958 | INDICATOR, AIRSPEED, PITOT STATIC, MAXIMUM ALLOWABLE SPEED, 4O-4OO KNOTS |
| MIL-I-27552 Revision C:1995 | INDICATOR, TEMPERATURE, THERMOCOUPLE EHU-15A/A, POTENTIOMETER TYPE, WHITE LIGHTED |
| MIL-DTL-26202 Revision E:2006 | LIGHT, MARKER, AIRPORT, SEMIFLUSH, GENERAL SPECIFICATION FOR |
| MIL F 38642 : A | FIN ASSEMBLY, BOMB, MXU-469/B AND MXU-467/B |
| MS52149 Revision G:1994 | BATTERY, STORAGE, LEAD-ACID (LOW MAINTENANCE) TYPE 6TL |
| MIL-S-21277 Revision A:1958 | SWITCH, LIQUID LEVEL, GENERAL SPECIFICATION FOR |
| MIL-S-87238 Base Document:1985 | SURVIVAL AND FLOTATION SYSTEM, AIRBORNE |
| MIL-L-52841 Revision A:1981 | LABORATORY, FIELD, TRAILER, CHASSIS MOUNTED, FOR DEVELOPING PIPELINE WELD RADIOGRAPHS |
| MIL-S-7470 Revision A:1975 | SHAFT, POWER TRANSMISSION, AIRCRAFT ACCESSORY, GENERAL SPECIFICATION FOR |
| MIL-T-81838 Base Document:1971 | TANK, FUEL, AIRCRAFT, AUXILIARY EXTERNAL 300 GALLON, TYPE AERO 1D |
| BS ISO 28219:2017 | Packaging. Labelling and direct product marking with linear bar code and two-dimensional symbols |
| RR-S-001301 Base Document:1967 | SAFETY EQUIPMENT, CLIMBING |
| MIL-I-536 Revision C:1988 | INDICATOR SOLUTION, PH DETERMINATION [FOR WATER SUPPLY TESTING] |
| MIL-I-25482 Revision D:1993 | INDICATOR, ENGINE TESTING |
| MIL-T-85472 Revision A:1987 | TEST SET, GROUP OQ-169A/DSM-96A |
| MIL H 83298 : A | HOSE, TETRAFLUOROETHYLENE, HIGH TEMPERATURE, HIGH PRESSURE (3000 PSI) HYDRAULIC AND PNEUMATIC |
| MIL-DTL-70446 Revision B:2007 | MACHINE GUN, 5.56 MM: M249 |
| MIL-STD-1647 Revision E:2003 | IDENTIFICATION MARKINGS FOR DOMESTICALLY MANUFACTURED BEARINGS, BALL, ANNULAR FOR INSTRUMENTS AND PRECISION COMPONENTS |
| MIL-B-85099 Base Document:1978 | BATTERY, WET PRIMARY FOR AN/DKT-37(V) TELEMETRY PACKAGE |
| MIL S 8932 : A | SWITCH, PRESSURE, AIRCRAFT, GENERAL SPECIFICATION FOR |
| MIL-DTL-70446 Revision C:2008 | MACHINE GUN, 5.56 MM: M249 |
| MIL A 5498 : D | ACCUMULATORS, HYDRAULIC, CYLINDRICAL 3000 PSI, AIRCRAFT |
| MIL-DTL-5846 Revision D:2008 | Chromel and Alumel Thermocouple Electrical Wire |
| MIL-S-12511 Revision G:1983 | SPRAYER, INSECTICIDE, FRAME MOUNTED, GASOLINE ENGINE DRIVEN, MIST AND SOLID STREAM, 180 GPH |
| MIL-B-45390 Revision A:1987 | BULLDOZER KIT, EARTH-MOVING: TANK MOUNTING, M9 |
| MIL L 49434 : NOTICE 1 | LIGHT, AIMING, INFRARED AN/PAQ-4 |
| MIL C 17587 : B | CIRCUIT BREAKER, LOW VOLTAGE, ELECTRIC POWER, AIR, OPEN FRAME, REMOVABLE CONSTRUCTION |
| MIL S 12211 : E | SWITCH, PRESSURE |
| MIL-I-7112 Revision B:1985 | INDICATOR, TEMPERATURE, ELECTRICAL RESISTANCE, CYLINDER HEAD 0 DEGREES C TO 300 DEGREES C |
| MIL C 87149 : 1986 | CLOTHING OUTFIT, EXTREME COLD WEATHER SURVIVAL A/P22S-15 |
| MIL-C-44216 Revision A:1989 | CANTEEN, WATER, COLLAPSIBLE, 5 QUART CAPACITY |
| MIL C 17361 : F | CIRCUIT BREAKERS, AIR, ELECTRIC, INSULATED HOUSING (SHIPBOARD USE) |
| MIL-E-83304 Revision B:1975 | EXTINGUISHER UNIT, FIRE BROMOCHLORODIFLUOROMETHANE, FEU-2/S32P, 40 GALLON CAPACITY, TRUCK MOUNTING |
| MIL-I-27672 Revision B:1987 | INDICATOR, POSITION ALU-4/1, HORIZONTAL STABILIZER |
| MIL-DTL-55235 Revision A:2003 | CONNECTORS, COAXIAL, RADIO FREQUENCY, SERIES TPS, GENERAL SPECIFICATION |
| MIL-A-27670 Revision D:1994 | AMPLIFIER-INDICATOR GROUP, INDICATED AIRSPEED A/A24G-10 |
| MIL-M-29417 Base Document:1984 | MODULE, FUEL PUMP [SIXCON] |
| MIL-N-25161 Revision C:1969 | NOZZLE, AERIAL PRESSURE REFUELING, TYPE MA-2 |
| MIL-A-83212 Revision A:1976 | ALTIMETER, PRESSURE AAU-27/A |
| MIL-S-0053046 Revision A:1994 | SURVEYING EQUIPMENT, ELECTRONIC DISTANCE MEASURING, MEDIUM RANGE, (SEDME MR) |
| MIL-G-26988 Revision C:1971 | GAGE, LIQUID QUANTITY, CAPACITOR TYPE TRANSISTORIZED, GENERAL SPECIFICATION FOR |
| MIL-L-85762 Revision A:1988 | LIGHTING, AIRCRAFT, INTERIOR, NIGHT VISION |
| SAE AS 1650 : 2017 | COUPLING ASSEMBLY, THREADLESS, FLEXIBLE, FIXED CAVITY, SELF-BONDING, PROCUREMENT SPECIFICATION |
| MIL-I-25859 Revision C:1995 | INDICATOR, THRUST AEU-2/A, SYNCHRO STYLE, PRESSURE RATIO, 1.2-3.4 UNITS, INTEGRALLY LIGHTED |
| MIL-C-52978 Base Document:1980 | CHEST, COLLAPSIBLE TANK |
| AA-D-001918 Base Document:1975 | DESK, FLAT TOP, STEEL, CONTEMPORARY STYLE |
| MIL-I-83245 Revision A:1994 | INDICATOR SET, OIL PRESSURE A/A24J-17 |
| JSSG-2009 Revision A:2013 | Air Vehicle Subsystems |
| MIL-I-83262 Revision B:1977 | INDICATOR, TEMPERATURE, THERMOCOUPLE HERMETICALLY SEALED, GENERAL SPECIFICATION FOR |
| MIL-V-23219 Base Document:1962 | VALVE MANIFOLDS, HIGH PRESSURE AIR REDUCING |
| MIL D 26503 : A | DETECTOR, MAGNETIC AZIMUTH AND COMPENSATOR, DETECTOR, MAGNETIC AZIMUTH |
| MIL-G-49312 Base Document:1989 | GOGGLES, NIGHT VISION AN/PVS-7A |
| MIL-I-27680 Revision C:1973 | INDICATOR, ATTITUDE, ARU-12/A, REMOTE |
| MIL-DTL-81219 Revision C:2009 | Indicator, Elapsed Time, Electrochemical |
| SAE AS 85075 : 2000 | TIE DOWN ASSEMBLY, HELICOPTER BLADE, GENERAL SPECIFICATION FOR |
| MIL C 83517 : 0 | CONNECTOR, COAXIAL, RADIO FREQUENCY FOR COAXIAL, STRIP OR MICROSTRIP TRANSMISSION LINE, GENERAL SPECIFICATION FOR |
| MIL-S-22783 Revision C:1972 | SEALING MACHINES, ELECTRICAL IMPULSE (JAW TYPE) |
| MIL-B-273 Revision F:1990 | Bag, Drinking Water Storage, Dispensing, Cloth, Cotton Duck, Porous |
| MIL-P-11087 Revision G:1994 | PIPE, STEEL: GROOVED OR PLAIN ENDS |
| MIL T 52849 : C | TEST KIT, PETROLEUM; AVIATION FUEL CONTAMINATION (PORTABLE) |
| MIL F 81836 : A SUPP 1 | FILTER AND DISPOSABLE ELEMENT, FLUID PRESSURE, HYDRAULIC, 3 MICRON ABSOLUTE |
| MIL-I-27673 Revision C:1993 | INDICATOR, TRUE AIRSPEED AVU-15/A |
| SAE AS 8712 : 2013 | VALVE; AIR RELIEF, LOW PRESSURE |
| MIL P 7788 : F | PANEL, INFORMATION INTEGRALLY ILLUMINATED |
| MIL-S-53120 Base Document:1994 | SUPPORT SYSTEM, SPECIAL DIVER'S AIR (SDASS) |
| MIL-P-6131 Revision C:1984 | PLUG, DEHYDRATOR, HUMIDITY, INDICATING |
| MIL-R-46509 Revision A:1982 | ROCKET MOTOR, XM30, METAL PARTS FOR |
| MIL-R-25410 Revision G:1991 | REGULATORS, OXYGEN, DILUTER-DEMAND AUTOMATIC-PRESSURE BREATHING |
| MIL-I-5914 Revision E:1993 | INDICATOR, RATE OF FLOW, FUEL TYPE EFU 24/A AND TYPE EFU 25/A |
| MIL-D-42048 Base Document:1987 | DEPLOYABLE MEDICAL SYSTEMS, GENERAL REQUIREMENTS FOR |
| MIL-C-52464 Revision C:1992 | CYLINDER ASSEMBLIES, ACTUATING, LINEAR: HYDRAULIC FOR BRIDGE AND BRIDGE LAUNCHER |
| GGG-B-485 Revision B:1978 | BLOCK, TACKLE, WIRE ROPE, WITH SWIVEL HOOK, (FOR CRANE USE) |
| MIL-C-47011 Base Document:1974 | COATING, SILVER CONDUCTIVE, ELECTRICAL AND THERMAL |
| MIL-DTL-17587 Revision C:2007 | CIRCUIT BREAKERS, ACB, LOW VOLTAGE, ELECTRIC POWER, AIR, REMOVABLE CONSTRUCTION, GENERAL SPECIFICATION FOR |
| MIL-B-85107 Revision B:1988 | BEARING, SPIN (SIDEWINDER) |
| MIL-DTL-24044 Revision C:2013 | FLANGES, COAXIAL LINE, RIGID, AIR DIELECTRIC, GENERAL SPECIFICATION FOR |
| MIL T 25502 : C | TRUE HEADING COMPUTER GROUP AN/AJA-I |
| MIL-DTL-13931 Revision J:1999 | Cannon: General Specification for |
| MIL-B-43998 Revision D:1992 | BATH UNIT, AUTOMATED, MULTI-HEAD |
| MIL-A-53129 Base Document:1992 | ALARM-MONITOR GROUP OA-9431/FSS-9(V) |
| MIL G 38195 : G | GENERATOR SET, GAS TURBINE ENGINE 60 KW 400 HERTZ, GENERAL PURPOSE |
| MIL-DTL-62749 Revision A:2010 | BRIDGE, FIXED: ALUMINUM, HIGHWAY, UNITED KINGDOM, MEDIUM GIRDER AND ERECTION, AND TRANSPORTATION EQUIPMENT, FULLY COMPETITIVE COMPONENTS FOR |
| MIL-I-27623 Revision C:1972 | INDICATOR, ATTITUDE, REMOTE STANDBY, 2 INCH |
| MIL-DTL-7627 Revision G:2010 | INDICATOR, TURN AND SLIP, 28 V DC |
| MIL-I-25950 Revision B:1967 | INDICATOR, PRESSURE, OIL, 0-100 PSI |
| MIL-I-7087 Revision A:1968 | INDICATOR, PRESSURE OIL, 0-200 PSI |
| MIL-B-27036 Revision A:1962 | BOMB, LOADING PRACTICE BDU-9/E |
| GGG-H-86 Revision C:1963 | HAMMER, HAND, (FORGED STEEL HEAD) |
| MIL-I-7071 Revision B:1972 | INDICATOR, TEMPERATURE, THERMOCOUPLE HERMETICALLY SEALED, GENERAL SPECIFICATION FOR |
| MIL-P-85315 Base Document:1979 | Pump, Ejector, Air Vehicle Fuel, General Specification For |
| MIL-I-83117 Revision B:1975 | INDICATOR, ANGLE OF ATTACK |
| MIL-M-24605 Revision A:1988 | MONITOR, HEAT STRESS |
| MIL-B-25846 Revision B:1961 | BOMB, PRACTICE, PROFILE BDU-8/B |
| MIL S 9320 : C | SIGNAL, WARNING, AUDIBLE, FOR HEADSET |
| MIL B 11040 : E | BELT, V: ENGINE ACCESSORY DRIVE |
| SAE AS 1960 : 2013 | COUPLING ASSEMBLY, V-BAND, SHEET METAL FLANGE, PNEUMATIC TUBE |
| MIL T 53068 : 0 | TANKS, LIGHTWEIGHT, COLLAPSIBLE, PILLOW, 160 GALLON (NOMINAL), DRINKING WATER |
| MIL-V-18318 Revision B:1966 | VALVE, PRESSURE REGULATING, OXYGEN SYSTEM |
| MIL-C-10387 Revision J:1992 | COUPLINGS, CLAMP, PIPE; WITH BOLTS AND SYNTHETIC-RUBBER GASKETS FOR GROOVED-END PIPE |
| MIL-T-1180 Revision D:1981 | THERMOMETER, SELF-INDICATING LIQUID IN GLASS |
| MIL A 7965 : C SUPP 1 | ANTENNA COMPONENTS, ANTIPRECIPITATION STATIC |
| MIL-S-20197 Revision C:1977 | SCALE, PLOTTING, PRECISION, CENTIMETRES AND INCHES, WITH CASE |
| MIL B 62542 : A | BALL SCREW LINEAR ACTUATOR |
| SAE AS 81582 : 2017 | CONNECTORS, ELECTRICAL, BAYONET COUPLING, ENVIRONMENT RESISTING, UMBILICAL, GENERAL SPECIFICATION FOR |
| MIL-C-3779 Revision E:1991 | CASE, ENGINEER BATTALION, DRAFTING EQUIPMENT, CANVAS |
| MIL-C-14039 Revision C:1981 | COMPASS, SUN, UNIVERSAL TYPE 0 TO 90 DEGREES, NORTH AND SOUTH LATITUDES, WITH CARRYING CASE |
| MIL-V-85374 Base Document:1979 | VISOR, SHATTER RESISTANT |
| MIL-I-21070 Revision B:1965 | INSULATING SHEET AND TAPE, ELECTRICAL, REINFORCED MICA PAPER |
| GG-D-600 Revision D:1982 | DRAFTING INSTRUMENT SETS: AND DRAFTING INSTRUMENTS |
| GG-C-560 Revision D:1986 | COMPASSES, MAGNETIC, SURVEYORS & TRANSIT, POCKET, WITH OPTIONAL BALL & SOCKET JOINT OR BALL & SOCKET HEAD, & JACOBS STAFF |
| MIL-S-53046 Base Document:1984 | SURVEYING EQUIPMENT, ELECTRONIC DISTANCE MEASURING, MEDIUM RANGE, (SEDME-MR) |
| MIL-PRF-83041 Revision C:2000 | FILTER-SEPARATOR, LIQUID FUEL SKID MOUNTED, 600 GALLONS PER MINUTE |
| MIL-T-26963 Revision D:1992 | TESTER, PRESSURE GAGE, HYDRAULIC, PORTABLE TYPE MP-1 |
| FF-B-2844 Base Document:1994 | BEARINGS, BALL, ANNULAR (GENERAL PURPOSE) |
| MIL-B-40098 Revision H:1989 | BURNER UNIT, GASOLINE, FIELD RANGE OUTFIT, M2A |
| MIL D 53015 : NOTICE 2 | DISPLACEMENT & EVACUATION KIT, 6 INCH HOSELINE |
| MIL R 55083 : A | RELAY ASSEMBLY RE-181/MSA-7 |
| AA-D-191 Revision A:1955 | DESK, STEEL, GENERAL OFFICE |
| MIL C 81543 : B | CONTAINER ASSEMBLIES, INFLATABLE LIFE RAFT |
| MIL-C-10085 Revision E:1977 | CUTTERS, PHOTOGRAMMETRIC, SLOTTED-TEMPLATE: HAND-OPERATED |
| MIL-P-52559 Revision B:1974 | PIPE STEEL WEIGHT COATED, FOR SUBMARINE PIPELINE SYSTEMS |
| MIL L 25370 : E | LIFE PRESERVER INFLATING ASSEMBLY, MA-1 |
| MIL-F-11698 Revision D:1988 | FASTENER, QUICK RELEASE, ALUMINUM, |
| MIL-S-46172 Revision A:1984 | STEEL FORGINGS |
| GG-T-258 Revision A:1967 | TESTER, BATTERY ELECTROLYTE SOLUTION |
| MIL D 45582 : B | DESOLDERING & RESOLDERING KITS, ELECTRIC |
| MIL-F-55614 Revision B:1976 | FILTER, INFRARED INTERFERENCE-TYPE (PINK) FOR SEARCHLIGHT, INFRARED 28-VOLT, 110-AMPERE |
| MIL-A-52685 Base Document:1970 | ADHESIVE: BONDING, CHLOROPRENE AIR FIELD, MEMBRANE SURFACING |
| MIL-A-9094 Revision D:1969 | ARRESTER, LIGHTNING, GENERAL SPECIFICATION FOR |
| SAE MA 2007A : 2015 | HOSE ASSEMBLY, TETRAFLUOROETHYLENE, LIGHTWEIGHT, 204 DEGREE C, 21000 KPA HYDRAULIC, METRIC |
| MIL-C-26237 Revision C:1983 | CRADLE, AIRCRAFT-MISSILE COMPONENTS MMU-1/E |
| MIL-G-81065 Revision A:1967 | GYRO-PENDULUM ASSEMBLY (FOR TORPEDO MK 46 MOD O AND MK 46 MOD 1) |
| MIL-R-14368 Revision C:1974 | REGULATOR ASSEMBLY, RELAY ASSEMBLY, AND VOLTAGE REGULATOR ASSEMBLY: 24-VOLT (NOMINAL RATING), 100 TO 400 AMPERE, DIRECT CURRENT |
| MIL-I-25941 Revision D:1986 | INDICATOR, TURN AND SLIP, 2-INCH SIZE, INTEGRALLY LIGHTED |
| SAE AS 6055 : 2006 | DRUM, METAL REUSABLE, SHIPPING AND STORAGE (CAP. FROM 88 TO 510 CUBIC INCHES) |
| MIL-P-46892 Revision A:1980 | PLASTIC MOLDING MATERIAL, EPOXY, GLASS FIBER |
| MIL-D-11933 Revision B:1955 | DUMMY LOAD, ELECTRICAL A-64/UP |
| MIL-B-18876 Revision A:1976 | BOX, AMMUNITION, 40 MM MARK 1 MOD 0 |
| MIL F 13455 : C | FILTER, LIGHT (FOR BLACKOUT SECURITY) |
| MIL-T-60530 Revision A:1971 | TECHNICAL DATA PACKAGE FOR AMC MATERIAL |
| MIL-S-47314 Base Document:1990 | SWITCH, MOMENTARY, ACCELERATION-SENSITIVE |
| MIL-O-27525 Base Document:1962 | OVERCOAT, SURVIVAL, ARCTIC SRU-6/P |
| MIL-A-45997 Base Document:1987 | ATTACHMENTS, CUTTING FOR TORCHES, OXYACETYLENE WELDING AND CUTTING |
| MIL-C-87970 Base Document:1982 | CONTROL SET, GYROSCOPE, ATTITUDE HEADING AN/ASN-129 |
| MIL-G-27693 Revision A:1962 | GYROSCOPE, DISPLACEMENT SBU-6/A, ROLL AND PITCH |
| MIL-M-29460 Base Document:1990 | MODULE, WATER PUMP (SIXCON) |
| MIL M 4803 : D | MOTOR-GENERATOR, 400 HZ PRECISE OUTPUT, GENERAL REQUIREMENTS FOR |
| MIL-G-5678 Revision C:1964 | GAGE PRESSURE, DIAL INDICATING, MANIFOLD PRESSURE |
| MIL-C-24368 Revision B:1987 | CONNECTOR ASSEMBLIES, PLUGS AND RECEPTACLES, ELECTRIC POWER TRANSFER, SHORE TO SHIP AND SHIP TO SHIP, GENERAL SPECIFICATION FOR |
| MIL-S-6180 Revision B:1964 | SWAGING TOOLS, FLEXIBLE CABLE TERMINAL, HAND-OPERATED |
| MIL-D-26124 Revision B:1977 | DUCT AND DUCT ASSEMBLY, PNEUMATIC, FLEXIBLE |
| MIL P 18148 : C | PLUG, ELECTRIC, AIRCRAFT STORAGE BATTERY |
| MIL-I-7084 Revision A:1988 | INDICATOR, PRESSURE, HYDRAULIC 0-4,000 PSI |
| MIL-I-27848 Revision B:1994 | INDICATOR, HORIZONTAL SITUATION AQU-4/A |
| MIL-L-85314 Revision A:1983 | LIGHT SYSTEMS, AIRCRAFT, ANTI COLLISION, STROBE, GENERAL SPECIFICATION FOR |
| SAE ARP 4898 : 2005 | STANDS, SHIPPING AND STORAGE, AIRCRAFT ENGINES, REUSABLE |
| MIL-V-62381 Revision A:1985 | VALVE, SOLENOID OPERATED |
| MIL G 5413 : D NOTICE 1 | GENERATOR, TACHOMETER, FOUR POLE |
| MIL P 62071 : B | POWER SUPPLY, HIGH VOLTAGE, SOLID STATE, 24 VOLTS, DIRECT CURRENT |
| MIL-DTL-49285 Revision A:2008 | CABLES, SPECIAL PURPOSE, ELECTRICAL, ALUMINUM FOIL SHIELDED PAIRS, TRIPLETS, OR QUADS, GENERAL SPECIFICATION FOR |
| MIL-DTL-6019 Revision E:2011 | GAGES, PRESSURE, DIAL INDICATING, LOW-PRESSURE OXYGEN |
| MIL-DTL-21338 Revision B:2014 | WASHER, KEY RETAINING, BALL AND ROLLER BEARINGS |
| MIL-G-25591 Revision E:1981 | GYROSCOPE, RATE, SWITCHING, TYPE MC-1 |
| MIL-P-11570 Revision C:1984 | PYROMETERS, INDICATING, THERMOCOUPLES |
| W-C-440 Revision B:1970 | CLIP, ELECTRICAL, GENERAL SPECIFICATION FOR |
| MIL T 25435 : B | TRANSMITTER, PRESSURE, AIRCRAFT, VARIABLE RELUCTANCE TYPE, GENERAL SPECIFICATION FOR |
| MIL-I-38258 Base Document:1965 | INDICATOR, ATTITUDE ARU 18/A DIRECTOR |
| MIL-L-6273 Revision D:1983 | LIGHT, NAVIGATIONAL, BEACON, OBSTACLE OR CODE, TYPE G 1 |
| MIL-T-7258 Revision B:1985 | TRANSMITTER, TEMPERATURE ELECTRICAL RESISTANCE TYPE B-4 |
| MIL-C-87975 Base Document:1985 | CLOCK, AIRCRAFT, MECHANICAL ABU-32/A |
| MIL-I-5415 Revision C:1987 | INDICATOR, AIR SPEED, PITOT STATIC PRESSURE GENERAL SPECIFICATION FOR |
| MIL S 87966 : NOTICE 1 | SAFETY EQUIPMENT FALL ARRESTING |
| MIL-A-27671 Revision B:1965 | AMPLIFIER-INDICATOR GROUP, ALTITUDE VERTICAL SPEED A/A24G-11 |
| MIL A 4946 : B | ANTENNA ASSEMBLY AT-197()/GR |
| MIL-L-85824 Revision A:1988 | LIFE RAFT, INFLATABLE, ONE MAN, VEE BOTTOM, LRU-18/U |
| GGG-O-591 Revision F:1977 | OILER, HAND |
| MIL-P-3631 Revision C:1981 | PARALLEL RULER (ROLLING) |
| MIL-L-6723 Revision C:1987 | LIGHT, AIRCRAFT, GENERAL SPECIFICATION FOR |
| MIL-T-43779 Revision C:1988 | TIMER, DELAY, RELEASE, CARGO PARACHUTE, M1 AND M2 |
| MIL G 6019 : C | GAGE, PRESSURE, DIAL INDICATING, LOW-PRESSURE OXYGEN |
| MIL-O-81375 Revision B:1983 | ORAL INFLATION ASSEMBLIES, SURVIVAL EQUIPMENT, INFLATABLE |
| MIL-B-45852 Revision A:1965 | BORESCOPES M1 AND M2 |
| MIL-B-45530 Revision A:1988 | BOOSTER, AMMUNITION, ELECTRIC, CALIBER .50 |
| MIL-B-8976 Base Document:1969 | BEARINGS, PLAIN, SELF-ALIGNING, ALL METAL |
| MIL-B-14036 Revision E:1992 | BRACKET, OUTBOARD MOTOR: BOW ATTACHMENT; 12-TON PNEUMATIC HALF FLOAT |
| MIL-S-52159 Revision C:1994 | SLING, MULTIPLE LEG .625 INCH BY 6-FOOT CHAIN, WITH SPECIAL HOOKS AND RING |
| MIL-A-63242 Revision A:1982 | AMPLIFIER, OPERATIONAL TRIPLE PROGRAMMABLE MICROPOWER |
| MIL-C-10015 Revision D:1982 | CHEST, TOOL KIT, EMPTY |
| MIL M 62361 : C | MOTOR, DRIVE, DIRECT CURRENT 2 RPM/8RPM |
| MIL F 52618 : D | FITTING, PIPE, ALUMINUM ALLOY (THREADED) 150 POUND, GENERAL SPECIFICATION FOR |
| MIL-H-52802 Base Document:1974 | HOOK, STEEL BOLTED TANK ERECTION |
| DOD-N-63548 Base Document:1982 | NUT, PLAIN, HEXAGON, WHEEL MOUNTING, METRIC, GENERAL SPECIFICATION FOR |
| MIL-S-6904 Revision B:1965 | Signal, Emergency Warning, General Specification For |
| MIL-DTL-62547 Revision D:2010 | VALVE AND CYLINDER ASSEMBLIES, HALON 1301 |
| SAE AS 17852 : 2012 | REDUCERS, OXYGEN PRESSURE |
| EIA CMB5 : 2014 STABILIZED | CONFIGURATION MANAGEMENT REQUIREMENTS FOR SUBCONTRACTORS/VENDORS |
| MS53063 Revision B:2011 | INDICATOR, AIR CLEANER, INTAKE, RESTRICTION MECHANICAL TYPE |
| JJ-H-571 Revision B:1967 | HOSE, FIRE, LINEN, UNLINED (WITH OR WITHOUT COUPLINGS) |
| MIL-STD-129-2 Base Document:1993 | MARKING FOR SHIPMENT & STORAGE - MEDICAL MATERIAL |
| MIL-E-24715 Base Document:1989 | EXTINGUISHERS, FIRE. VAPORIZING LIQUID (BROMOCHLORODIFLUOROMETHANE, HALON 1211) |
| MIL P 82634 : 0 | PROTECTIVE CLOTHING SET, CHEMICAL AGENTS, MARK 1 MOD O |
| EIA 836 CD : B2010(R2015) | CONFIGURATION MANAGEMENT DATA EXCHANGE AND INTEROPERABILITY |
| MIL-DTL-5500 Revision G:2014 | CAP, HIGH PRESSURE AIR VALVE |
| MS39061 Revision D:2004 | SWITCH, TOGGLE, SPST, AND SPDT, 24 VOLT DC, 25 AMPERE (WATERPROOF) |
| MIL-DTL-7077 Revision D:2011 | INDICATOR, TEMPERATURE, ELECTRICAL RESISTANCE, MULTIFUNCTION, -70 DEGREES C TO 150 DEGREES C, 2-INCH SIZE |
| MIL-C-53050 Base Document:1985 | CAMOUFLAGE KIT, GROUND LAUNCHED CRUISE MISSILE (GLCM) SYSTEM |
| MIL-DTL-82068 Revision D:2012 | SPRAYERS, PESTICIDE; TRAILER-MOUNTED, GASOLINE-ENGINE-DRIVEN |
| MIL-I-27619 Revision G:1974 | INDICATORS, ATTITUDE DIRECTOR |
| MIL-C-27505 Revision B:1967 | Cartridge, Engine Starter MXU-4A/A |
| MIL-O-52374 Revision E:2013 | Oscillator: High Voltage General Specification for |
| MIL-DTL-55116-1 Revision B:2004 | Connector, Plug, Five Pin Audio, Crimp Sleeve Terminals, Wire Strain Relief, U-229 Type |
| MIL-C-5414 Revision G:1993 | COMPUTER, AIR NAVIGATION DEAD RECKONING TYPE MB 4A AND TYPE CPU 26A/P |
| MIL-B-4792 Revision E:1994 | BUMPER, RUBBER, DUPLEX ROUND |
| MIL H 87961 : NOTICE 2 | HOSE AND HOSE ASSEMBLIES, AIR DUCT, AIR BREATHING, OXYGEN SYSTEM GENERAL SPECIFICATION FOR |
| MIL-T-5583 Revision C:1987 | Transmitter, Position, 28 Volts DC |
| MIL-T-58082 Revision A:1974 | TESTER, PYROMETER & THERMOCOUPLE, FIELD, TYPE N-3A |
| MIL W 6496 : B NOTICE 1 | WINCH, DRUM, ENGINE OF TURRET HOIST, TYPE A-1 |
| MIL-M-7969 Revision C:1965 | Motors, Alternating Current, 400-Cycle, 115/200-Volt System, Aircraft, General Specification for |
| MIL-DTL-62011 Revision E:2009 | Pump, Fuel, Electrically-Operated: 24-Volt DC, In-Tank Type, General Specification for |
| MIL-R-5049 Revision D:1989 | RING, WIPER, PISTON ROD |
| MIL-DTL-52543 Revision E:2010 | LIGHT, MARKER, GROUND-OBSTRUCTION |
| DOD-STD-35-41 Revision A:1979 | AUTOMATED ENGINEERING DOCUMENT PREPARATION SYSTEM, FILTER, MECHANICAL LIQUID GAS/AIR |
| MIL-L-19844 Revision A:1963 | LEAD; SHIELDED, DETACHABLE IGNITION |
| MIL-C-6092 Revision A:1960 | COMPUTER, AIRCRAFT LOAD BALANCING |
| MIL-C-83435 Base Document:1974 | CLOTHING OUTFIT, EXTREME COLD WEATHER SURVIVAL A/P22S-10 |
| MIL-C-38207 Revision A:1965 | CLOCK, AIRCRAFT, MECHANICAL ABU 11/A |
| MIL-DTL-6839 Revision E:2011 | INDICATOR, POSITION, LANDING GEAR |
| MIL G 21480 : A | GENERATOR SYSTEM, 400 HERTZ ALTERNATING CURRENT, AIRCRAFT GENERAL SPECIFICATION FOR |
| MIL-I-26525 Revision F:1988 | INDICATOR, VOLTAGE, BATTERY GENERATOR 28 VOLT DC (NOMINAL) |
| MIL I 27851 : B | INDICATOR, INDICATED AIRSPEED AVU-17/A |
| MIL-T-25307 Revision D:1985 | TRANSMITTER, PRESSURE, HYDRAULIC, TYPE MJ-1 |
| MIL-T-52965 Base Document:1979 | TOPOGRAPHIC SUPPORT SYSTEM (TSS), DIRECT SUPPORT SECTION, TRUCK MOUNTED |
| MIL A 25949 : E (2) | ACCELEROMETER, AIRCRAFT RANGE -5 TO PLUS 1OG UNITS, INTEGRALLY LIGHTED |
| MIL-I-25437 Revision B:1984 | INDICATORS, AIRCRAFT, PRESSURE, VOLTAGE RATIO TYPE, GENERAL SPECIFICATION FOR |
| MIL-T-22007 Revision A:1973 | TEST SET, BATTERY AN/AMM-1 |
| MIL-S-12204 Revision C:1974 | SOLDER, LEAD-TIN ALLOY |
| MIL C 3650 : A | CONNECTOR, COAXIAL, RADIO FREQUENCY, SERIES LC |
| MIL-C-12999 Revision B:1967 | CHEST, HYMN BOOK |
| MIL-T-8249 Revision B:1979 | TRANSMITTER, RATE OF FLOW, FUEL, TYPE MB-2 |
| GGG-B-191 Revision C:1992 | BENDER, TUBE, HAND, (PORTABLE) |
| MIL-R-17729 Revision C:1972 | RESPIRATOR OUTFIT, SUPPLIED-AIR TWO-MAN |
| MIL-A-58066 Revision A:1966 | ALTIMETER, PRESSURE, PARACHUTIST'S |
| MIL-P-55624 Base Document:1971 | PROTECTOR, ELECTRICAL COMMUNICATION CIRCUITS GENERAL SPECIFICATION FOR |
| MIL I 87108 : A | INFLATION ASSEMBLY, FLU-2A/P |
| MIL-I-8974 Revision A:1981 | INDICATOR, EVENT COUNTING, GENERAL SPECIFICATION FOR |
| MIL-A-11928 Revision B:1960 | AXLE-RL-27( ) (FOR LAYING FIELD WIRE) |
| AA-B-450 Revision B:1974 | BLACKBOARD, PORTABLE |
| MIL-H-11190 Revision D:1970 | HEADSET, ELECTRICAL AND HEADSET MICROPHONES |
| MIL-P-46329 Revision A:1972 | PERISCOPE, TANK: M13, M14A1, M17, M17C, M26, M27, M37 & M45 |
| MIL T 26898 : B | TEST SET, AIRFIELD LIGHTING SYSTEMS, TYPE MM-1 |
| MIL-A-55059 Revision D:1988 | ADAPTER, BATTERY TERMINAL |
| MIL-B-27044 Revision C:1968 | BOMB, PRACTICE BDU-12/B |
| MIL-R-45306 Revision D:1991 | RADIATOR, ENGINE COOLING, INDUSTRIAL |
| MIL L 25866 : B | LIGHT, EMERGENCY EXIT, AIRCRAFT LEU AND 1-A |
| GGG-S-285 Revision B:1964 | SHEARS, PRUNING, HAND, (TWO-HAND OPERATED, LOPPING) |
| MIL-B-3990 Revision D:1980 | BEARINGS, ROLLER, NEEDLE, AIRFRAME, ANTIFRICTION, INCH |
| MIL-C-11071 Revision D:1983 | CLEANING MACHINE, FUEL CAN, DRUM |
| MIL M 62368 : A | MOTOR, GEARHEAD, 18-30 VOLTS, DIRECT CURRENT |
| MIL-R-1983 Revision G:1976 | RACK, BREAD, BAKERS, ONE WIRE SHELF, FOLDING TYPE |
| MIL S 53012 : NOTICE 2 | SUSPENSION KIT, 6 INCH HOSELINE |
| MIL-I-27667 Revision C:1990 | INDICATOR, TEMPERATURE, ELECTRICAL RESISTANCE, EHU-16/A MULTIFUNCTION -70 DEGREES TO +150 DEGREES C |
| MIL-B-83183 Revision B:1987 | BARRIER, AIRCRAFT ARRESTING |
| MIL-P-25062 Revision B:1964 | PARACHUTE RECOVERY SYSTEM, MISSILE AND DRONE, GENERAL REQUIREMENT FOR DEVELOPMENT OF |
| MIL B 38634 : LATEST | BOMB, FIRE, BLU 32A B |
| MIL-I-23524 Revision A:1986 | INDICATOR, ATTITUDE DIRECTOR, REMOTE, ID 1329A (V) |
| MIL-DTL-549 Revision L:2001 | POLES, TENT, UPRIGHT AND RIDGE |
| NASA STD 5005(INT) : 2007 | THE DESIGN AND FABRICATION OF GROUND SUPPORT EQUIPMENT |
| MIL P 4846 : C | POWER SUPPLY, SILICON RECTIFIER, 28V 300 AMP OUTPUT TYPE ME 1 |
| MIL-V-85830 Base Document:1989 | VENTILATOR, TACTICAL, HELICOPTER AIRCREWMEN, CHEMICAL, BIOLOGICAL, RADIOLOGICAL PROTECTIVE |
| MIL-F-38762 Base Document:1966 | FLUORESCENT PENETRANT INSPECTION UNITS |
| MIL C 25666 : E (1) | CONVERTER, LIQUID OXYGEN, CAPACITANCE TYPE GAGING, GENERAL SPECIFICATION FOR |
| MIL C 7115 : F | CONVERTER, AIRCRAFT, GENERAL SPECIFICATION FOR |
| MIL-C-52370 Revision A:1978 | CASE, COMPUTER SUPPLIES, CARRYING |
| MIL R 5149 : B | ROCKET ENGINE, LIQUID PROPELLANT GENERAL SPECIFICATION FOR |
| DOD-C-85050 Base Document:1982 | CHARGERS, BATTERY, NICKEL-CADMIUM, AIRCRAFT, GENERAL SPECIFICATION FOR |
| MIL K 20277 : H | KNIFE, COMBAT AND SHEATH |
| DOD-S-70338 Base Document:1988 | SEAL RING, METAL, METRIC GENERAL SPECIFICATION FOR |
| MIL-PRF-32470 Base Document:2013 | TRUCK, FORKLIFT, 10,000 LB CAPACITY, VARIABLE REACH, ROUGH TERRAIN |
| MIL R 25532 : A | ROCKET MOTOR, AERONAUTICAL, QUALIFICATION TEST FOR |
| MIL-P-24764 Base Document:1991 | POWER SUPPLIES, SHIPBOARD, ELECTRONIC, GENERAL SPECIFICATION FOR |
| MIL-T-10629 Revision C:1978 | T-SQUARE [STEEL] |
| MIL-T-52877 Revision B:1980 | TRANSMISSION GROUP DATA: TRANSMITTER, DATA: T 1257/FSS 9(V) AND RECEIVER, DATA: R 1861/FSS 9(V) |
| MIL I 27190 : B | INDICATOR, PRESSURE AGU-3/A, HYDRAULIC, 0-4,000 PSI |
| MIL-I-26299 Revision G:1990 | INDICATORS, RATE OF FLOW, 0-5,000 PPH, INTEGRALLY LIGHTED |
| MIL-T-6598 Revision F:1994 | TRANSMITTER, RATE OF FLOW, FUEL, SYNCHRO STYLE TYPE J 6A |
| MIL V 25961 : F | VALVE, FILL-BUILDUP-VENT, LIQUID OXYGEN CONVERTER, CRU-5O/A |
| MIL-DTL-19648 Revision E:2003 | RELAYS, TIME DELAY, THERMAL, GENERAL SPECIFICATION FOR |
| MIL-M-55554 Revision A:1969 | MODULE, IMAGE INTENSIFIER 25 MILLIMETER, TYPE 8585 |
| NASA STD 6002 : 2008 | APPLYING DATA MATRIX IDENTIFICATION SYMBOLS ON AEROSPACE PARTS |
| MIL-I-23832 Revision A:1980 | INDICATOR, TACHOMETER, TRIPLE POINTER, HELICOPTER |
| MIL-D-38134 Revision A:1971 | DETECTOR, MAGNETIC AZIMUTH DSU-4/A, HIGH TEMPERATURE |
| MIL-A-14295 Revision C:1985 | ALIGNMENT EQUIPMENT, WHEEL, FOR MILITARY WHEELED VEHICLES |
| MIL-I-81049 Revision A:1972 | INDICATOR, TEMPERATURE, ELECTRICAL RESISTANCE, VOLTAGE COMPENSATED, MULTIFUNCTION |
| MIL-P-38268 Revision C:1988 | AURAL PROTECTORS, SOUND |
| MIL-B-2424 Revision D:1983 | BLOCK AND TACKLE: WITH LOAD LOCKING DEVICE |
| MIL C 38333 : 0 | CONTROLLER, COMPASS SYSTEM C-6448/ASN-55 |
| MIL R 10916 : D | ROD, LEVEL, GEODETIC |
| MIL-C-52933 Base Document:1977 | CAMOUFLAGE SCREENING SYSTEMS, MODULAR LIGHTWEIGHT, SYNTHETIC SNOW |
| MIL L 6484 : C | LIGHT, COCKPIT UTILITY, AIRCRAFT GENERAL SPECIFICATION FOR |
| MIL R 6466 : B NOTICE 1 | RELAY, ARMATURE, EXCITER PROTECTION, TYPE A-1 |
| KKK-L-370 Revision D:1988 | LINING, FRICTION, (CLUTCH AND BRAKE, METALLIC, METAL-CERAMIC AND SEMI-METALLIC) |
| MIL B 83771 : A | BATTERY, REMOTELY ACTIVATED SUBMINIATURE RESERVE PRIMARY |
| MIL L 7830 : D | LIGHT ASSEMBLY, MARKER, AIRCRAFT OBSTRUCTION |
| MIL-E-6719 Revision A:1972 | ELBOW; ELECTRICAL CONDUIT |
| MIL-C-85283 Revision B:1994 | CONTROL MONITOR SET, GUIDED WEAPON, AN/AWW-9 |
| MIL I 25860 : A | INDICATOR, RATE OF FLOW EFU-1/A, 0-6,000-24,000 PPH, 2-INCH, INTEGRALLY LIGHTED |
| MIL-T-5955 Revision C:1970 | TRANSMISSION SYSTEM, VTOL-STOL GENERAL REQUIREMENTS FOR |
| MIL C 25531 : D | COUPLING HALF, QUICK DISCONNECT, PNEUMATIC STARTER, EXTERNAL, LOW PRESSURE, DIRECT RELEASE |
| MIL-B-30510 Revision B:1983 | BLOCK AND TACKLE SET, LINEMAN'S, WITH SNUBBING HOOK |
| MIL-M-45907 Revision A:1984 | MOUNT,SHIPPING CONTAINER, RESILIENT - SHOCK AND VIBRATION DAMPING |
| MIL-H-81324 Base Document:1966 | HONING MACHINE, DRY PORTABLE |
| MIL C 87147 : 0 | OUTLINES VACUUM PACKAGED ACCESSORIES FOR THE SRU-6/P overcoat. |
| MIL-DTL-85855 Revision A:1999 | VALVE, QUICK DISCONNECT, FOR THE PROTECTIVE ASSEMBLY, CHEMICAL, BIOLOGICAL, RADIOLOGICAL (CBR), A/P22P-9 (V) |
| MIL-T-6302 Revision B:1964 | TRANSMITTER, PRESSURE, FUEL 0-600 PSI |
| MIL C 25955 : 0 | CONNECTOR, ELECTRICAL, ENVIRONMENT RESISTING MINIATURE, WITH SNAP-IN CONTACTS |
| MIL-B-52371 Revision A:1971 | BINOCULARS, ELECTRONIC AN/PAS-5 |
| MIL-P-4640 Revision A:1957 | PLASTIC FILM, POLYETHYLENE, FOR BALLOON USE |
| MIL-C-27212 Revision B:1970 | CABLE, POWER, ELECTRICAL, AIRPORT LIGHTING CONTROL |
| MIL D 9555 : A NOTICE 1 | |
| MIL-DTL-25866 Revision C:2010 | LIGHT, EMERGENCY EXIT, AIRCRAFT LEU-1/A |
| MIL-V-85603 Base Document:1989 | VOLTMETER, DC, AIRCRAFT, DIGITAL DISPLAY GENERAL SPECIFICATION FOR |
| MIL-STD-1189 Revision B:1989 | BAR CODE SYMBOLOGY, STANDARD DEPARTMENT OF DEFENSE |
| MIL-T-11372 Revision F:1991 | TRIVET, SURVEYING INSTRUMENT |
| MIL-DTL-27190 Revision C:2006 | INDICATOR, PRESSURE AGU-3/A, HYDRAULIC, 0-4,000 PSI |
| MIL-T-4638 Revision B:1985 | TESTERS, MATERIAL HARDNESS (ROCKWELL TYPE) |
| MIL-DTL-5003 Revision E:2010 | FLOODLIGHT SET, ELECTRIC, TRIPOD-MOUNTED, FOUR 150-WATT FLOODLIGHTS |
| MIL-B-25820 Revision B:1967 | BOMB, LOADING PRACTICE BDU-6/E AND BDU-35/E |
| MIL I 83361 : (4) | INDICATOR, PRESSURE OIL, DUAL EGU-18/A, 0-100 PSI |
| MIL-B-22227 Revision A:1976 | BEARING, BALL, ANNULAR, GENERATOR AND MOTOR-GENERATOR |
| MIL-DTL-38804 Revision E:2017 | MANUALS, TECHNICAL - TIME COMPLIANCE TECHNICAL ORDERS (TCTO) AND TCTO SUPPLEMENTS |
| MIL-P-85767 Base Document:1986 | PROJECTILE, 20 MILLIMETER, TARGET PRACTICE PGU-27/B |
| MIL-S-3629 Revision F:1981 | STEREOSCOPES, LENS, AERIAL PHOTOGRAPH INTERPRETATION [POCKET] |
| MIL-STD-841 Revision B:1971 | MARKING OF AIRCRAFT AND MISSILE PROPULSION SYSTEM PARTS FABRICATED FROM CRITICAL HIGH TEMPERATURE ALLOYS |
| MIL-W-1366 Revision F:1975 | WINDOWS, OPTICAL SENSOR |
| MIL T 15514 : 0 | TELEPHONE EQUIPMENT, SOUND POWERED HANDSETS, HEADSET-CHEST SETS, AND HEADSET-MICROPHONES, TYPES H-200/U, H-201/U, H-202/U, H-203/U, AND H-204/U |
| GGG-H-506 Revision D:1962 | HOE, MATTOCKS, AND PICK |
| MIL-R-52002 Revision A:1971 | RACK ASSEMBLY, CONE, AIRPORT MARKER LIGHT |
| MIL-DTL-85361 Revision A:2010 | CARRYING CASE ASSEMBLIES, INFLATABLE LIFE RAFT |
| MIL-DTL-6856 Revision D:2006 | INDICATOR, PRESSURE, SYNCHRO, 1-1/2 INCH |
| MIL-DTL-26517 Revision B:2000 | POWER SUPPLY, TRANSFORMER-RECTIFIER, AIRCRAFT GENERAL SPECIFICATION FOR |
| MIL-C-62748 Base Document:1994 | CARRIER, 120 MM MORTAR: M1064A3 |
| MIL V 8622 : B | VALVE, HIGH-PRESSURE, OXYGEN-CYLINDER AUTOMATIC OPENING |
| MIL-P-38136 Revision A:1969 | PITOT STATIC TUBE COMPENSATED TRU 62/A |
| MIL-V-29591 Base Document:1992 | VISOR ASSEMBLY, AVIATOR'S SEVEN WAVELENGTH LASER PROTECTIVE, GENERAL SPECIFICATION FOR |
| MIL-C-7942 Revision B:1966 | CONNECTORS, HOSE, QUICK-DISCONNECT, ANTI "G" SUIT |
| MIL-PRF-85046 Revision A:2015 | ACTUATOR, LINEAR, ELECTROMECHANICAL |
| MIL-DTL-25666 Revision F:1995 | CONVERTER, LIQUID OXYGEN, CAPACITANCE TYPE GAGING, GENERAL SPECIFICATION FOR |
| MIL-P-52307 Revision B:1992 | PLOTTER, RECTANGULAR COORDINATES (COORDINATOGRAPH) |
| MIL-F-284 Revision E:1973 | FORK, KNIFE AND SPOON, FIELD MESS |
| MIL-T-10794 Revision G:1982 | TUBE, ALUMINUM ALLOY, EXTRUDED PIPELINE SECTION, WITH GROOVED NIPPLE WELDED ON EACH END |
| SAE AS 94900 : 2007 | AEROSPACE - FLIGHT CONTROL SYSTEMS - DESIGN, INSTALLATION AND TEST OF PILOTED MILITARY AIRCRAFT, GENERAL SPECIFICATION FOR |
| MIL M 5388 : B | MACHMETER; PITOT STATIC OPERATED, RANGE 0.5 TO 1.5, TYPE A-2B |
| MIL-T-13559 Revision B:1973 | TARGET EQUIPMENT |
| MIL-L-5567 Revision F:1983 | LIFE RAFTS, INFLATABLE 4 AND 7 MAN FOR AIRCRAFT USE |
| SAE MA 2100 : 2015 | HOSE ASSEMBLIES, METAL MEDIUM PRESSURE, HIGH TEMPERATURE, METRIC |
| GEIA CMB6-4:1991(S2014) | CONFIGURATION CONTROL |
| MIL-C-85373 Revision A:1987 | CONTROL MONITOR SET, GUIDED WEAPON, AN/AWW 12A |
| MIL DTL 17 : J | CABLES, RADIO FREQUENCY, FLEXIBLE AND SEMIRIGID, GENERAL SPECIFICATION FOR |
| MIL-T-49305 Base Document:1989 | TEST SET, COUNTERMEASURE SET TS-3609 ()/ALQ-156(V) |
| MIL B 11814 : A | BATTERY, STORAGE, ZINC-SILVER OXIDE, ALKALINE, PORTABLE |
| MIL-P-8945 Revision A:1967 | PANEL, RELAY, PILOT, ENCLOSED, AIRPORT LIGHTING |
| MIL P 62738 : 1992 | PRINTED WIRING ASSEMBLY, IGNITION INTERRUPT DRIVER |
| MIL-F-25880 Revision B:1972 | FILTER, BAND PASS, BAND SUPPRESSION F -339/A |
| MIL-R-11050 Revision B:1969 | RECTIFIER, METALLIC, SELENIUM |
| MIL-C-538 Revision F:1975 | COMPARATOR, COLOR |
| DOD-STD-2140 Base Document:1982 | MACHINERY ALTERATION (MACHALT) INSTRUCTIONS, PREPARATION OF (METRIC) |
| GGG-D-296 Revision B:1968 | DIE, THREADCUTTING AND RETHREADING, COLLET, THREADING DIE; AND DIESTOCK (BOLT AND SCREW THREADING, UNIFIED, AMERICAN NATIONAL AND METRIC FORM THREADS) |
| MIL-W-5013 Revision L:1991 | WHEEL AND BRAKE ASSEMBLIES - AIRCRAFT, GENERAL SPECIFICATION FOR |
| MIL-A-13488 Revision C:1973 | AIR CLEANER, ENGINE: HEAVY-DUTY, OIL-BATH TYPE (FOR INTERNAL-COMBUSTION ENGINES) |
| MIL-G-8170 Revision D:1987 | GAGE, OIL PRESSURE, DIRECT INDICATING, SINGLE CLAMP MOUNTED 0 -200 PSI 320 DEGREE SCALE 2 INCH SIZE, TYPE AGU 12/A AND AGU 13/A |
| IEC TS 62668-1:2016 | Process management for avionics - Counterfeit prevention - Part 1: Avoiding the use of counterfeit, fraudulent and recycled electronic components |
| MIL-T-81821 Base Document:1969 | TRAINERS, MAINTENANCE, EQUIPMENT AND SERVICES GENERAL SPECIFICATION FOR |
| DOD-STD-35-126 Base Document:1978 | AUTOMATED ENGINEERING DOCUMENT PREPARATION SYSTEM, CYLINDERS, ACTUATING, LINEAR |
| MIL-DTL-3643 Revision B:2003 | Connectors, Coaxial, Radio Frequency, Series HN, and Associated Fittings, General Specification for |
| MIL-A-85434 Revision A:1983 | AMPLIFIER, TRAVELING WAVE TUBE AM-6937/DLQ-3B |
| MIL P 83825 : 0 | PANEL ASSY, AUTOMATIC POWER TRANSFER FOR MB-TEEN AND EMU SERIES DIESEL ENGINE GENERATOR SETS |
| MIL-DTL-3650 Revision B:2003 | Connectors, Coaxial, Radio Frequency, Series LC |
| MIL-S-52330 Revision E:1993 | SHOP EQUIPMENT, ELECTRICAL REPAIR, SEMITRAILER MOUNTED |
| MIL-C-7079 Revision A:1965 | CIRCUIT BREAKERS, NON TRIP-FREE GENERAL SPECIFICATION FOR |
| MIL-D-52842 Revision A:1981 | DRIER, X-RAY, FILM FORCED AIR, WALL MOUNTED |
| MIL V 81722 : A | VALVE, INFLATION, LIFE RAFT, FLU-6/P |
| MIL-G-62363 Revision A:1985 | |
| MIL-M-48647 Base Document:1986 | MICROCIRCUIT, DIGITAL, DECODER, LOGIC ARRAY |
| MIL P 82637 : 0 | PROTECTIVE CLOTHING SET, TOXICOLOGICAL AGENTS AND PROPELLANTS |
| MIL-DTL-52849 Revision E:2008 | TEST KIT - AVIATION FUEL CONTAMINATION (PORTABLE) |
| MIL-L-11931 Revision C:1983 | LENS, CAMERA, COPYING LE 5() |
| DOD S 24623 : 1985 | SPLICE, FIBER OPTIC CABLE, GENERAL SPECIFICATION FOR (METRIC) |
| A-A-55748 Revision A:2017 | SPRAYERS, INSECTICIDE, MANUALLY-CARRIED: HAND-OPERATED-COMPRESSION |
| NASA MSFC STD 2806 : 2005 | MSFC TAILORING STANDARD FOR THE GLOBAL DRAWING REQUIREMENTS MANUAL (GDRM) TENTH EDITION |
| MIL-DTL-3903 Revision F:2013 | WIRE ROPE ASSEMBLIES, SINGLE LEG, (SLING TYPE) |
| SAE AS 5778 : 1997 | COVERS, AIRCRAFT COMPONENTS, GENERAL REQUIREMENTS FOR |
| SAE AS 85731 : 2015 | FASTENER, POSITIVE LOCKING, ELECTRONIC EQUIPMENT, GENERAL SPECIFICATION FOR |
| MIL T 25627 : C | TRANSMITTER, SYNCHRO, ANGLE OF ATTACK OR SIDESLIP |
| SAE AS 4388 : 2013 | HOSE ASSEMBLY PTFE HEAVY DUTY, -65 TO 400 DEGREES F (-55 TO 204 DEGREES C) 8000 PSI (56000 KPA) HYDRAULIC AND PNEUMATIC |
| MIL V 11201 : E | VALVE, SAFETY RELIEF, ANGLE, BRASS OR BRONZE, EXTRA-HEAVY, FOR GASOLINE SERVICE |
| MIL-C-53071 Base Document:1987 | COUPLING ASSEMBLIES, QUICK-DISCONNECT, SEXLESS TYPE |
| MIL-A-27391 Revision B:1963 | ALTIMETER, PRESSURE AAU-2A |
| MIL-DTL-18307 Revision H:2006 | NOMENCLATURE AND IDENTIFICATION FOR AERONAUTICAL SYSTEMS INCLUDING JOINT ELECTRONICS TYPE DESIGNATED SYSTEMS AND ASSOCIATED SUPPORT SYSTEMS |
| MIL-C-10147 Revision D:1984 | CABINET, PHOTOGRAPHIC STORAGE, FILM BM-11( ) |
| MIL-C-38973 Base Document:1970 | CARTRIDGE, BOMB EJECTION CCU-10/B |
| MIL-PRF-32070 Revision A:2012 | TEST PROGRAM SETS |
| MIL-A-83039 Revision B:1971 | AIR CONDITIONER A/M32C-10A AIR CYCLE FOR AIRCRAFT GROUND SUPPORT |
| SAE AS 4604 : 2003 | HOSE ASSEMBLY, 3000 PSI, POLYTETRAFLUOROETHYLENE, METALLIC REINFORCED, 400 DEGREES F, HEAVY DUTY, AIRCRAFT HYDRAULIC SYSTEMS |
| SAE MA 2079 : 2015 | HOSE ASSEMBLY, CONVOLUTED POLYTETRAFLUOROETHYLENE, HIGH TEMPERATURE, MEDIUM PRESSURE, AIRCRAFT, METRIC |
| SAE AS 23899 : 2012 | AURAL PROTECTOR, SOUND |
| SAE ARP 1967 : 2014 | CONTAINERS, SHIPPING AND STORAGE, REUSABLE |
| ASTM F 2590 : 2006 : R2013 | Standard Specification for Bearing, Roller, Thrust, Two Channeled Race Surface, Rigid or Flat Seat Type |
| ASTM F 2163 : 2001 : EDT 1 | Standard Specification for Ring, Bearing, Inner: for Needle Roller Bearing With Drawn Outer Ring |
| SAE MA 4623 : 2015 | Hose Assembly, Polytetrafluoroethylene, Para Aramid Reinforced Heavy-Duty, 21 000 kPa, 135 °C, Aircraft Hydraulic Systems, Metric |
| ASTM F 2162 : 2001 : EDT 2 | Standard Specification for Bearing, Roller, Needle: Drawn Outer Ring, Full Complement, Without Inner Ring, Open and Closed End, Standard Type |
| ASTM F 2162 : 2001 | Standard Specification for Bearing, Roller, Needle: Drawn Outer Ring, Full Complement, Without Inner Ring, Open and Closed End, Standard Type |
| ASTM F 2431 : 2004 | Standard Specification for Ring Bearing, Inner: For Needle Roller Bearing with Thick Outer Ring |
| ASTM F 1347 : 1991 : R1996 | Standard Specification for Manually Operated Fueling Hose Reels |
| MS35644 Revision G:2011 | FILLER NECK: FUEL TANK - MILITARY VEHICLES |
| DSCC 99002 : A | TRANSFORMER, SWITCHING |
| SAE EIA 649/2 : 2016 | CONFIGURATION MANAGEMENT REQUIREMENTS FOR NASA ENTERPRISES |
| ASME Y14.100 : 2017 | ENGINEERING DRAWING PRACTICES - ENGINEERING DRAWING AND RELATED DOCUMENTATION PRACTICES |
| SAE AS 6369 : 2017 | COUPLING ASSEMBLY, V-BAND SHEET METAL WIDE FLANGE, PNEUMATIC TUBE |
| ANSI MH10.8.2 : 1995 | DATA IDENTIFIER & APPLICATION IDENTIFIER STANDARD |
| MIL-STD-129 Revision R:2014 | Military Marking for Shipment and Storage |
| ISO/IEC 16022:2006 | Information technology Automatic identification and data capture techniques Data Matrix bar code symbology specification |
| CEA 706 : A2004 | COMPONENT MARKING STANDARD |
| ISO/IEC 15459-4:2014 | Information technology Automatic identification and data capture techniques Unique identification Part 4: Individual products and product packages |
| AIAG B 4 : 2003 | PARTS IDENTIFICATION AND TRACKING APPLICATION STANDARD |
| DI-MGMT-81803 Base Document:2011 | ITEM UNIQUE IDENTIFICATION (IUID) MARKING PLAN |
| MIL-STD-1686 Revision C:1995 | ELECTROSTATIC DISCHARGE CONTROL PROGRAM FOR PROTECTION OF ELECTRICAL AND ELECTRONIC PARTS, ASSEMBLIES AND EQUIPMENT (EXCLUDING ELECTRICALLY INITIATED EXPLOSIVE DEVICES) |
| ISO/IEC 15416:2016 | Automatic identification and data capture techniques — Bar code print quality test specification — Linear symbols |
| MIL-STD-196 Revision F:2013 | JOINT ELECTRONICS TYPE DESIGNATION AUTOMATED SYSTEM |
| ISO/IEC 15459-2:2015 | Information technology Automatic identification and data capture techniques Unique identification Part 2: Registration procedures |
| GG-P-455 Revision B:1967 | PLATES AND FOILS, PHOTOGRAPHIC (PHOTOSENSITIVE ANODIZED ALUMINUM) |
| SAE AS 9132 : 2015 | DATA MATRIX QUALITY REQUIREMENTS FOR PARTS MARKING |
| ISO/IEC 16388:2007 | Information technology — Automatic identification and data capture techniques — Code 39 bar code symbology specification |
| ASME Y14.24 : 2012 | TYPES AND APPLICATIONS OF ENGINEERING DRAWINGS - ENGINEERING DRAWING AND RELATED DOCUMENTATION PRACTICES |
| MIL-DTL-19834 Revision C:2006 | PLATES, IDENTIFICATION OR INSTRUCTION, METAL FOIL, ADHESIVE BACKED, GENERAL SPECIFICATION FOR |
| ISO/IEC 15420:2009 | Information technology Automatic identification and data capture techniques EAN/UPC bar code symbology specification |
| ESD S20.20 : 2014 | PROTECTION OF ELECTRICAL AND ELECTRONIC PARTS, ASSEMBLIES AND EQUIPMENT (EXCLUDING ELECTRICALLY INITIATED EXPLOSIVE DEVICES) |
| ISO/IEC 15417:2007 | Information technology Automatic identification and data capture techniques Code 128 bar code symbology specification |
| A-A-208 Revision C:2012 | INK, MARKING, STENCIL, OPAQUE, (POROUS AND NON-POROUS SURFACES) |
| ISO/IEC 19762-1:2008 | Information technology Automatic identification and data capture (AIDC) techniques Harmonized vocabulary Part 1: General terms relating to AIDC |
| MIL-HDBK-263 Revision B:1994 | ELECTROSTATIC DISCHARGE CONTROL HANDBOOK FOR PROTECTION OF ELECTRICAL & ELECTRONIC PARTS, ASSEMBLIES & EQUIPMENT |
| DOD 4100.39-M : 2010 | FEDERAL LOGISTICS INFORMATION SYSTEM - VOLUME 10: PROCEDURES MANUAL MULTIPLE APPLICATION REFERENCES/INSTRUCTIONS/TABLES AND GRIDS |
| NASA HDBK 6003 : 2008 | APPLICATION OF DATA MATRIX IDENTIFICATION SYMBOLS TO AEROSPACE PARTS USING DIRECT PART MARKING METHODS/TECHNIQUES |
| A-A-56032 Revision D:2003 | INK, MARKING, EPOXY BASE |
| ISO/IEC TR 29158:2011 | Information technology Automatic identification and data capture techniques Direct Part Mark (DPM) Quality Guideline |
| ATIS 0300220 : 2011 | STRUCTURE FOR THE REPRESENTATION OF THE COMMUNICATIONS INDUSTRY MANUFACTURERS, SUPPLIERS, AND RELATED SERVICE COMPANIES FOR INFORMATION EXCHANGE |
| NASA STD 6002 : 2008 | APPLYING DATA MATRIX IDENTIFICATION SYMBOLS ON AEROSPACE PARTS |
| AIAG B 17 : 2009 | 2D DIRECT PARTS MARKING GUIDELINE |
| MIL-DTL-15024 Revision F:1997 | Plates and Tags for Identification of Equipment, General Specification for |
| MHIA MH10.8.7 : 2006 | LABELING AND DIRECT PRODUCT MARKING WITH LINEAR BAR CODE AND TWO-DIMENSIONAL SYMBOLS |
| ISO/IEC 15434:2006 | Information technology Automatic identification and data capture techniques Syntax for high-capacity ADC media |
| ISO/IEC 15415:2011 | Information technology Automatic identification and data capture techniques Bar code symbol print quality test specification Two-dimensional symbols |
| DI-MGMT-81804 Revision A:2013 | ITEM UNIQUE IDENTIFICATION (IUID) MARKING ACTIVITY, VALIDATION AND VERIFICATION REPORT |
| ASME Y14.100 : 2017 | ENGINEERING DRAWING PRACTICES - ENGINEERING DRAWING AND RELATED DOCUMENTATION PRACTICES |
| ISO/IEC 15418:2016 | Information technology Automatic identification and data capture techniques GS1 Application Identifiers and ASC MH10 Data Identifiers and maintenance |
US$20.00
Excluding Tax where applicable
USD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
PDF - English
PDF - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.