VALVE, OXYGEN, HELIUM AND HELIUM OXYGEN MIXTURE, HIGH PRESSURE FOR GAS SERVICES

Available format(s)

PDF

Publisher

US Military Specs/Standards/Handbooks

Outlines types and sizes of valves for helium high pressure oxygen, and helium oxygen mixture gas services.

DocumentType	Standard
Pages	17
PublisherName	US Military Specs/Standards/Handbooks
Status	Current

MIL-STD-777 Revision F:2012

SCHEDULE OF PIPING, VALVES, FITTINGS, AND ASSOCIATED PIPING COMPONENTS FOR NAVAL SURFACE SHIPS

MIL S 15083 : B	STEEL CASTING (NAVY)
MIL C 15730 : M	COOLER, FLUID, NAVAL SHIPBOARD, LUBRICATING OIL, HYDRAULIC OIL, AND FRESH WATER
QQ-S-764 Revision B:1970
MIL-STD-271 Revision F:1986	REQUIREMENTS FOR NONDESTRUCTIVE TESTING METHODS
MIL-G-2860 Revision E:1977	GLASS, SIGHT, FLAT, CLEAR, BOROSILICATE
MIL M 17060 : F	MOTORS, 60-HERTZ, ALTERNATING CURRENT, INTEGRAL-HORSEPOWER, SHIPBOARD USE
MIL-T-16049 Revision C:1980	TACHOMETER: ELECTRICAL; SELF GENERATING; MECHANICAL, FIXED MOUNTING AND HAND HELD; AND VIBRATING REED
MIL-M-17059 Revision A:1965	MOTOR, 60 CYCLE, ALTERNATING CURRENT, FRACTIONAL H.P. (SHIPBOARD USE)
MS21208 Revision B:1969	INSERT, SCREW THREAD, COARSE AND FINE, FREE RUNNING, HELICAL COIL, CRES
QQ S 634 : LATEST	STEEL, BAR, CARBON, COLD FINISHED (STANDARD QUALITY)
ASTM E 186 : 2015 : REDLINE	Standard Reference Radiographs for Heavy-Walled (2 to 4<fraction><num>1</num><den>2</den></fraction > in. (50.8 to 114 mm)) Steel Castings
MIL-G-3087 Revision C:1973	GENERATOR SETS, STEAM TURBINE [DIRECT AND ALTERNATING CURRENT] [NAVAL SHIPBOARD USE]
MIL-S-19434 Revision B:1990	STEEL GEAR AND PINION FORGINGS, CARBON AND ALLOY, HEAT TREATED, NAVAL SHIPBOARD PROPULSION UNIT AND AUXILIARY TURBINE
MIL C 2212 : G	CONTROLLER, ELECTRIC MOTOR AC OR DC AND ASSOCIATED SWITCHING DEVICES
MIL-G-21410 Revision A:1991	GOVERNING SYSTEMS, SPEED AND LOAD-SENSING NAVAL SHIPBOARD USE
FF-B-171 Revision B:1993	BEARINGS, BALL, ANNULAR (GENERAL PURPOSE), METRIC
TT-L-201 Revision A:1978	LINSEED OIL, HEAT POLYMERIZED
MIL-G-16265 Revision F:1993	GASKETS, METALLIC-FLEXIBLE GRAPHITE AND METALLIC ASBESTOS, SPIRAL WOUND (FOR NAVY FLANGED JOINTS IN PIPING SYSTEMS)
MIL-P-23917 Base Document:1963	PRECIPITATOR (ELECTROSTATIC), VENT FOG, SHIPBOARD USE
MIL V 20065 : D	VALVE, ANGLE, PRESSURE RELIEF, NAVAL SHIPBOARD, FOR STEAM SERVICE
MIL-P-19131 Base Document:1956	PUMP, ROTARY, POWER DRIVEN MISCELLANEOUS
ASME B16.11 : 2016	FORGED FITTINGS, SOCKET-WELDING AND THREADED
MIL S 16974 : E NOTICE 1	STEEL BARS, BILLETS, BLOOMS AND SLABS: CARBON AND ALLOY (FOR REFORGING OR OTHER OPERATIONS BEFORE HEAT TREATMENT)
QQ-C-390 Revision B:1983	COPPER ALLOY CASTINGS (INCLUDING CAST BAR)
MS15003 Base Document:1951	FITTINGS, LUBRICATION (HYDRAULIC) SURFACE CHECK, 1/8 PIPE THREADS, STEEL TYPE 3
MIL-S-860 Revision B:1966	STEEL FORGING FOR STEAM TURBINE ROTORS
MIL S 1222 : H	STUD, BOLTS, HEX CAP SCREWS, SOCKET HEAD CAP SCREWS AND NUTS
MIL-R-17131 Revision C:1981	RODS AND POWDERS, WELDING, SURFACING
MIL-STD-438 Revision E:1973	SCHEDULE OF PIPING VALVES, FITTINGS, AND ASSOCIATED PIPING COMPONENTS FOR SUBMARINES SERVICE
MIL-G-19650 Revision B:1963	GENERATOR SETS, STEAM TURBINE, DIRECT DRIVE 2000 KV, 450 VOLT, 60 CYCLE A.C.
MIL-G-21032 Revision D:1972	GASKET, METALLIC ASBESTOS, SPIRAL WOUND (FORASA COMMERCIAL) SHOW 115 5
MIL-I-17244 Revision E:1971	INDICATOR, TEMPERATURE, DIRECT-READING, BIMETALLIC, (3 AND 5 INCH DIAL)
MIL-I-24137 Base Document:1965	IRON CASTINGS, NODULAR GRAPHITIC (DUCTILE IRON) AND NODULAR GRAPHITIC (CORROSION RESISTING, AUSTENITIC, LOW MAGNETIC PERMEABILITY) (FOR SHIPBOARD APPLICATION)
MIL-B-17931 Revision E:1987	BEARINGS, BALL, ANNULAR, FOR QUIET OPERATION
MIL L 15719 : A	LUBRICATING GREASE (HIGH-TEMPERATURE, ELECTRIC MOTOR, BALL AND ROLLER BEARINGS)
MIL S 861 : A	STEEL BARS, CORROSION RESISTING, NAVAL STEAM TURBINE PARTS US
MIL S 869 : C	STEEL BARS, BILLETS AND FORGINGS - ALLOY NITRIDING APPLICATION
MIL I 18997 : C (3)	INDICATOR, PRESSURE, PANEL MOUNTED OR CASE SUPPORTED, GENERAL SPECIFICATION
MIL-STD-777 Revision F:2012	SCHEDULE OF PIPING, VALVES, FITTINGS, AND ASSOCIATED PIPING COMPONENTS FOR NAVAL SURFACE SHIPS
QQ-S-766 Revision D:1988	STEEL PLATES, SHEETS AND STRIP CORROSION RESISTING
MIL C 15345 : G	CASTING, NONFERROUS, CENTRIFUGAL
QQ-T-390 Revision A:1972	TIN ALLOY INGOTS AND CASTINGS AND LEAD ALLOY INGOTS AND CASTINGS (ANTIFRACTION METAL) FOR BEARING APPLICATIONS
MIL-STD-278 Revision F:1987	WELDING AND CASTING STANDARD
QQ-S-763 Revision F:1996	STEEL BARS, WIRE, SHAPES AND FORGINGS; CORROSION RESISTANT
QQ S 631 : LATEST
QQ S 630 : LATEST
ASTM E 280 : 2015 : REDLINE	Standard Reference Radiographs for Heavy-Walled (4<fraction><num>1</num><den>2</den></fraction > to 12 in. (114 to 305 mm)) Steel Castings
MIL-Q-9858 Revision A:1963	QUALITY PROGRAM REQUIREMENTS
QQ-S-624 Revision C:1961
MIL-C-23233 Revision A:1992	COUPLINGS FOR PROPULSION UNITS, AUXILIARY TURBINES AND LINE SHAFTS NAVAL SHIPBOARD
MIL S 18410 : NOTICE 1
MIL-G-17859 Revision D:1993	GEAR ASSEMBLY, PROPULSION (NAVAL SHIPBOARD USE)
MIL-S-24093 Revision A:1991	STEEL FORGINGS, CARBON AND ALLOY HEAT TREATED
MIL-F-3541 Revision C:1989	FITTING, LUBRICATION, GENERAL SPECIFICATION FOR
MIL-S-23284 Revision A:1990	STEEL FORGINGS, CARBON AND ALLOY, FOR SHAFTS, SLEEVES, COUPLINGS AND STOCKS (RUDDERS AND DIVING PLANES)
MIL-T-19646 Revision A:1990	THERMOMETER, REMOTE READING, SELF-INDICATING DIAL, GAS ACTUATED
QQ-S-635 Revision B:1976	STEEL PLATE, CARBON
MIL S 866 : C	STEEL: BARS AND BILLETS (FOR CARBURIZING)
MIL S 21427 : B	STRAINER, ASSEMBLIES, MAIN STREAM, HIGH PRESSURE (SIZES 4 INCHES AND ABOVE)
MIL N 25027 : G	NUT, SELF-LOCKING, 250 DEGREES F, 450 DEGREES F, AND 800 DEGREES F
MIL S 870 : B	STEEL CASTING, MOLYBDENUM ALLOY