NACE SP 04 72 : 2015
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
METHODS AND CONTROLS TO PREVENT IN-SERVICE ENVIRONMENTAL CRACKING OF CARBON STEEL WELDMENTS IN CORROSIVE PETROLEUM REFINING ENVIRONMENTS
Available format(s)
Hardcopy , PDF
Superseded date
10-19-2020
Language(s)
English
Published date
01-01-2015
1.General
2.Prevention of Hydrogen Stress Cracking
3.Prevention of Alkaline Stress Corrosion Cracking
References
Bibliography
Appendix A: Rationale for Guidelines for Prevention of
Hydrogen Stress Cracking (Nonmandatory)
Appendix B: Rationale for Guidelines for Prevention of
Alkaline Stress Corrosion Cracking (Nonmandatory)
Appendix C: Summary of Cooling Time (t[8/5]) Concept (Nonmandatory)
Appendix D: Guidance on Local PWHT (Nonmandatory)
Describes guidelines to prevent most forms of environmental cracking of weldments in carbon steel refinery equipment, including pressure vessels, heat exchangers, piping, valve bodies, and pump and compressor cases.
| Committee |
STG 34
|
| DevelopmentNote |
Supersedes and Redesignates NACE RP 04 72. (12/2008)
|
| DocumentType |
Standard
|
| Pages |
36
|
| PublisherName |
National Association of Corrosion Engineers
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| API 664 : 2014 | SPIRAL PLATE HEAT EXCHANGERS |
| BS EN ISO 12211:2012 | Petroleum, petrochemical and natural gas industries. Spiral plate heat exchangers |
| 13/30261096 DC : 0 | BS EN ISO 17945 - MATERIALS RESISTANT TO SULFIDE STRESS CRACKING IN CORROSIVE PETROLEUM REFINING ENVIRONMENTS |
| BS EN ISO 10439-1:2015 | Petroleum, petrochemical and natural gas industries. Axial and centrifugal compressors and expander-compressors General requirements |
| API 577 : 2013 | WELDING PROCESSES, INSPECTION, AND METALLURGY |
| NACE SP0113:2023 | Pipeline Integrity Management: Methods Selection and Implementation |
| ASME PTB 2 : 2009 | GUIDE TO LIFE CYCLE MANAGEMENT OF PRESSURE EQUIPMENT INTEGRITY |
| 10/30165662 DC : 0 | BS ISO 13706 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - AIRCOOLED HEAT EXCHANGERS |
| BS EN ISO 12212:2012 | Petroleum, petrochemical and natural gas industries. Hairpin-type heat exchangers |
| API 932B : 2012 | DESIGN, MATERIALS, FABRICATION, OPERATION, AND INSPECTION GUIDELINES FOR CORROSION CONTROL IN HYDROPROCESSING REACTOR EFFLUENT AIR COOLER (REAC) SYSTEMS |
| API 660 : 2015 | SHELL-AND-TUBE HEAT EXCHANGERS |
| API 571 REDLINE : 2011 | DAMAGE MECHANISMS AFFECTING FIXED EQUIPMENT IN THE REFINING INDUSTRY |
| I.S. EN ISO 13706:2011 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - AIR-COOLED HEAT EXCHANGERS (ISO 13706:2011) |
| ASME B31.3:2016 | PROCESS PIPING |
| 10/30231432 DC : 0 | BS EN ISO 10439-1 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - AXIAL AND CENTRIFUGAL COMPRESSORS AND EXPANDER-COMPRESSORS - PART 1: GENERAL REQUIREMENTS |
| I.S. EN ISO 10439-1:2015 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - AXIAL AND CENTRIFUGAL COMPRESSORS AND EXPANDER-COMPRESSORS - PART 1: GENERAL REQUIREMENTS (ISO 10439-1:2015) |
| I.S. EN ISO 12211:2012 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - SPIRAL PLATE HEAT EXCHANGERS (ISO 12211:2012) |
| I.S. EN ISO 17945:2015 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - METALLIC MATERIALS RESISTANT TO SULFIDE STRESS CRACKING IN CORROSIVE PETROLEUM REFINING ENVIRONMENTS (ISO 17945:2015) |
| UNI EN ISO 12211 : 2012 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - SPIRAL PLATE HEAT EXCHANGERS |
| EEMUA 211 : 2016 | GUIDANCE ON THE SPECIFICATION OF PRESSURE VESSELS |
| EN ISO 12212:2012 | Petroleum, petrochemical and natural gas industries - Hairpin-type heat exchangers (ISO 12212:2012) |
| UNI EN ISO 13706 : 2012 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - AIR-COOLED HEAT EXCHANGERS |
| API 571 : 2011 | DAMAGE MECHANISMS AFFECTING FIXED EQUIPMENT IN THE REFINING INDUSTRY |
| I.S. EN ISO 12212:2012 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - HAIRPIN-TYPE HEAT EXCHANGERS (ISO 12212:2012) |
| DIN EN ISO 17945 E : 2015 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - METALLIC MATERIALS RESISTANT TO SULFIDE STRESS CRACKING IN CORROSIVE PETROLEUM REFINING ENVIRONMENTS (ISO 17945:2015) |
| 10/30196259 DC : 0 | BS EN ISO 12212 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - HAIRPIN-TYPE HEAT EXCHANGERS |
| API 661 : 2015 | PETROLEUM, PETROCHEMICAL, AND NATURAL GAS INDUSTRIES - AIR-COOLED HEAT EXCHANGERS |
| API 970 : 2017 | CORROSION CONTROL DOCUMENTS |
| API 510 CHINESE : 2014 | PRESSURE VESSEL INSPECTION CODE: IN-SERVICE INSPECTION, RATING, REPAIR, AND ALTERATION |
| UNI EN ISO 12212 : 2012 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - HAIRPIN-TYPE HEAT EXCHANGERS |
| ISO 13706:2011 | Petroleum, petrochemical and natural gas industries — Air-cooled heat exchangers |
| ISO 10439-1:2015 | Petroleum, petrochemical and natural gas industries Axial and centrifugal compressors and expander-compressors Part 1: General requirements |
| ISO 12212:2012 | Petroleum, petrochemical and natural gas industries — Hairpin-type heat exchangers |
| ISO 17945:2015 | Petroleum, petrochemical and natural gas industries Metallic materials resistant to sulfide stress cracking in corrosive petroleum refining environments |
| EN ISO 17945:2015 | Petroleum, petrochemical and natural gas industries - Metallic materials resistant to sulfide stress cracking in corrosive petroleum refining environments (ISO 17945:2015) |
| EN ISO 13706:2011 | Petroleum, petrochemical and natural gas industries - Air-cooled heat exchangers (ISO 13706:2011) |
| EN ISO 10439-1:2015 | Petroleum, petrochemical and natural gas industries - Axial and centrifugal compressors and expander-compressors - Part 1: General requirements (ISO 10439-1:2015) |
| EN ISO 12211:2012 | Petroleum, petrochemical and natural gas industries - Spiral plate heat exchangers (ISO 12211:2012) |
| API 582 : 2016 | WELDING GUIDELINES FOR THE CHEMICAL, OIL, AND GAS INDUSTRIES |
| API 751 : 2013 | SAFE OPERATION OF HYDROFLUORIC ACID ALKYLATION UNITS |
| API 663 : 2014 | HAIRPIN-TYPE HEAT EXCHANGERS |
| BS EN ISO 17945:2015 | Petroleum, petrochemical and natural gas industries. Metallic materials resistant to sulfide stress cracking in corrosive petroleum refining environments |
| DIN EN ISO 17945:2015-08 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - METALLIC MATERIALS RESISTANT TO SULFIDE STRESS CRACKING IN CORROSIVE PETROLEUM REFINING ENVIRONMENTS (ISO 17945:2015) |
| API 510 : 2014 | PRESSURE VESSEL INSPECTION CODE: IN-SERVICE INSPECTION, RATING, REPAIR, AND ALTERATION |
| NACE SP 04 03 : 2015 | AVOIDING CAUSTIC STRESS CORROSION CRACKING OF REFINERY EQUIPMENT AND PIPING |
| API 617 : 2014 | AXIAL AND CENTRIFUGAL COMPRESSORS AND EXPANDER-COMPRESSORS |
| API 577 CHINESE : 2013 | WELDING PROCESSES, INSPECTION AND METALLURGY |
| NACE 21413 : 2017 | PREDICTION OF INTERNAL CORROSION IN OILFIELD SYSTEMS FROM SYSTEM CONDITIONS |
| BS EN ISO 13706:2011 | Petroleum, petrochemical and natural gas industries. Aircooled heat exchangers |
| ISO 12211:2012 | Petroleum, petrochemical and natural gas industries — Spiral plate heat exchangers |
| NACE 8X194 : 2006 | MATERIALS AND FABRICATION PRACTICES FOR NEW PRESSURE VESSELS USED IN WET H[2]S REFINERY SERVICE |
| ASME PV CODE 8 DIV 2 : 2017 | BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS DIVISION 2- ALTERNATIVE RULES |
| ASTM A 833 : 2008 | Standard Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers |
| ASME PV CODE 9 : 2017 | BOILER AND PRESSURE VESSEL CODE - WELDING, BRAZING, AND FUSING QUALIFICATIONS - QUALIFICATION STANDARD FOR WELDING, BRAZING, AND FUSING PROCEDURES; WELDERS; BRAZERS; AND WELDING, BRAZING, AND FUSING OPERATORS |
| ASME PV CODE 8 DIV 1 : 2017 | BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS DIVISION 1 |
| ASTM E 384 : 2017 : REDLINE | Standard Test Method for Microindentation Hardness of Materials |
| API 620 : 2013 | DESIGN AND CONSTRUCTION OF LARGE, WELDED, LOW-PRESSURE STORAGE TANKS |
| ASME B31.3:2016 | PROCESS PIPING |
| ASME PV CODE 8 DIV 3 : 2017 | BPVC Section VIII-BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS - ALTERNATIVE RULES FOR CONSTRUCTION OF HIGH PRESSURE VESSELS |
| ASTM E 10 : 2017-05 | TEST METHOD FOR BRINELL HARDNESS OF METALLIC MATERIALS |
| NACE 8X294 : 2003 | REVIEW OF PUBLISHED LITERATURE ON WET H[2]S CRACKING OF STEELS THROUGH 1989 |
| ISO 15614-1:2017 | Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys |
| AWS A5.1M/A5.1 : 2012 | SPECIFICATION FOR CARBON STEEL ELECTRODES FOR SHIELDED METAL ARC WELDING |
| AWS A5.17/A5.17M : 1997 | SPECIFICATION FOR CARBON STEEL ELECTRODES AND FLUXES FOR SUBMERGED ARC WELDING |
| AWS A5.18/A5.18M : 2005 | SPECIFICATION FOR CARBON STEEL ELECTRODES AND RODS FOR GAS SHIELDED ARC WELDING |
| API 941 : 2016 | STEELS FOR HYDROGEN SERVICE AT ELEVATED TEMPERATURES AND PRESSURES IN PETROLEUM REFINERIES AND PETROCHEMICAL PLANTS |
| BS EN 288-9:1999 | Specification and approval of welding procedures for metallic materials Welding procedure test for pipeline welding on land and offshore site butt welding of transmission pipelines |
| BS EN 1011-2:2001 | Welding. Recommendations for welding of metallic materials Arc welding of ferritic steels |
| API 650 : 2013 | WELDED TANKS FOR OIL STORAGE |
| ASME PV CODE 2C : 2017 | BOILER AND PRESSURE VESSEL CODE - MATERIALS - SPECIFICATIONS FOR WELDING RODS, ELECTRODES, AND FILLER METALS |
| NACE 34108 : 0 | REVIEW AND SURVEY OF ALKALINE CARBONATE STRESS CORROSION CRACKING IN REFINERY SOUR WATERS |
| API 942 : 2ED 82 | CONTROLLING WELD HARDNESS OF CARBON STEEL REFINERY EQUIPMENT TO PREVENT ENVIRONMENTAL CRACKING |
| NACE SP 04 03 : 2015 | AVOIDING CAUSTIC STRESS CORROSION CRACKING OF REFINERY EQUIPMENT AND PIPING |
| ASTM E 92 : 2017 : REDLINE | Standard Test Methods for Vickers Hardness and Knoop Hardness of Metallic Materials |
US$179.00
Excluding Tax where applicable
USD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF - English - DRM
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.