• There are no items in your cart

NAS410:2003

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

NAS CERTIFICATION & QUALIFICATION OF NONDESTRUCTIVE TEST PERSONNEL
Available format(s)

Hardcopy

Superseded date

05-21-2020

Language(s)

English

Published date

01-01-2003

1 Scope
  1.1 Purpose
  1.2 Applicability
  1.3 Common methods
  1.4 Level of qualification
  1.5 Levels of certification
2 Reference documents
  2.1 Standards
  2.2 Order of precedence
3 Definitions
  3.1 Auditor
  3.2 Certification
  3.3 Closed book examinations
  3.4 Cognizant NDT organisation
  3.5 Direct readout instrument
  3.6 Documented
  3.7 Employer
  3.8 Evaluation
  3.9 Examination
  3.10 Experience
  3.11 Formal training
  3.12 General examination
  3.13 Indication
  3.14 Instructor
  3.15 Interpretation
  3.16 Method
  3.17 National Aerospace NDT Board
  3.18 On-The-Job-Training
  3.19 Outside agency
  3.20 Practical examination
  3.21 Prime contractor
  3.22 Procedure
  3.23 Qualification
  3.24 Responsible Level 3
  3.25 Specific examination
  3.26 Sub-Contractor
  3.27 Technique
  3.28 Test samples
  3.29 Written
  3.30 Written instruction
  3.31 Written practice
4 General requirements
  4.1 Written practice
  4.2 Personnel
  4.3 Methods
  4.4 Compliance
  4.5 Responsibility
5 Requirements for qualification
  5.1 Levels of qualification
6 Training and experience
  6.1 Training
  6.2 Minimum required training hours
  6.3 Experience
7 Examinations
  7.1 Purpose
  7.2 Visual acuity
8 Certification
  8.1 General
  8.2 Records
  8.3 Loss of certification
  8.4 Resistance of certification
  8.5 Re-Certification for level 1 'Limited', Level 1,
       and Level 2
  8.6 Re-Certification for level 3
Annex A - Credit system for Re-Certification of level 3
          NDT personnel

Establishes the minimum requirements for the qualification and certification of personnel involved in the application of non-destructive testing (NDT), non-destructive inspection (NDI), or non-destructive evaluation (NDE).

DocumentType
Standard
Pages
20
PublisherName
Aerospace Industries Association
Status
Superseded
SupersededBy
Supersedes

SAE AS 6171/3 : 2016 TECHNIQUES FOR SUSPECT/COUNTERFEIT EEE PARTS DETECTION BY X-RAY FLUORESCENCE TEST METHODS
ASTM B 247M : 2015 : REDLINE Standard Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings (Metric)
I.S. EN 16603-32-01:2014 SPACE ENGINEERING - FRACTURE CONTROL
SAE AMS A 21180 : 2017 ALUMINUM-ALLOY CASTINGS, HIGH STRENGTH
AWS C3.8M/C3.8 : 2011 SPECIFICATION FOR THE ULTRASONIC PULSE-ECHO EXAMINATION OF BRAZED JOINTS
ASTM E 1030 : 2005 : R2011 Standard Test Method for Radiographic Examination of Metallic Castings
PREN 4678 : 200P1 AEROSPACE SERIES - WELDMENTS AND BRAZEMENTS FOR AEROSPACE STRUCTURES - JOINTS OF METALLIC MATERIALS BY LASER BEAM WELDING - QUALITY OF WELDMENTS
ASTM E 690 : 2015 : REDLINE Standard Practice for In Situ Electromagnetic (Eddy Current) Examination of Nonmagnetic Heat Exchanger Tubes
ASTM E 2700 : 2014 : REDLINE Standard Practice for Contact Ultrasonic Testing of Welds Using Phased Arrays
ASTM E 3100 : 2017 Standard Guide for Acoustic Emission Examination of Concrete Structures
ASTM E 2698 : 2010 Standard Practice for Radiological Examination Using Digital Detector Arrays
ASTM E 703 : 2014 : REDLINE Standard Practice for Electromagnetic (Eddy Current) Sorting of Nonferrous Metals
ASTM E 1571 : 2011 : R2016 : EDT 1 Standard Practice for Electromagnetic Examination of Ferromagnetic Steel Wire Rope
SAE AMS 2442 : 2012 MAGNETIC PARTICLE ACCEPTANCE CRITERIA FOR PARTS
ASTM E 2984/E2984M : 2014 Standard Practice for Acoustic Emission Examination of High Pressure, Low Carbon, Forged Piping using Controlled Hydrostatic Pressurization
ASTM E 1000 : 2016 : REDLINE Standard Guide for Radioscopy
SAE AMS STD 2154 : 2017-05 INSPECTION, ULTRASONIC, WROUGHT METALS, PROCESS FOR
ASTM E 2983 : 2014 Standard Guide for Application of Acoustic Emission for Structural Health Monitoring
ASTM E 1955 : 2004 : R2009 Standard Radiographic Examination for Soundness of Welds in Steel by Comparison to Graded ASTM E 390 Reference Radiographs
ASTM E 2907/E2907M : 2013 Standard Practice for Examination of Paper Machine Rolls Using Acoustic Emission from Crack Face Rubbing
ASTM E 1444 : 2005 Standard Practice for Magnetic Particle Testing
ASTM E 1004 : 2017 : REDLINE Standard Test Method for Determining Electrical Conductivity Using the Electromagnetic (Eddy Current) Method
ASTM E 1495/E1495M : 2017 : REDLINE Standard Guide for Acousto-Ultrasonic Assessment of Composites, Laminates, and Bonded Joints
ASTM E 1817 : 2008 Standard Practice for Controlling Quality of Radiological Examination by Using Representative Quality Indicators (RQIs)
ASTM E 1603/E1603M : 2011 : R2017 Standard Practice for Leakage Measurement Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Hood Mode
ASTM E 2581 : 2014 : REDLINE Standard Practice for Shearography of Polymer Matrix Composites and Sandwich Core Materials in Aerospace Applications
ASTM E 1312 : 2009 : R2013 : EDT 1 Standard Practice for Electromagnetic (Eddy-Current) Examination of Ferromagnetic Cylindrical Bar Product Above the Curie Temperature
BS EN 4678:2011 Aerospace series. Weldments and brazements for aerospace structures. Joints of metallic materials by laser beam welding. Quality of weldments
BS EN 4179:2017 Aerospace series. Qualification and approval of personnel for non-destructive testing
MIL-DTL-63245 Revision C:2008 Projectile 155 Millimeter: HE, Metal Parts Assembly, M795
MIL A 12560 : H ARMOR PLATE, STEEL, WROUGHT, HOMOGENEOUS (FOR USE IN COMBAT-VEHICLES AND FOR AMMUNITION TESTING)
MIL-DTL-46594 Revision C:2011 Charge, Demolition, Shaped, 40 LB. M3A1 Loading, Assembling and Packing
MIL-STD-2219 Revision A:2005 FUSION WELDING FOR AEROSPACE APPLICATIONS
MIL-DTL-20517 Revision J:2011 Simulator, Projectile, Air Burst, M74A1 Parts for and Loading, Assembling and Packing
SAE AMS 2636 : 2016 ULTRASONIC IMMERSION INSPECTION TITANIUM AND TITANIUM ALLOY FORGINGS PREMIUM GRADE
ASTM C 1331 : 2018 : REDLINE Standard Practice for Measuring Ultrasonic Velocity in Advanced Ceramics with Broadband Pulse-Echo Cross-Correlation Method
I.S. EN 14165:2004 SPACE ENGINEERING STANDARDS - FRACTURE CONTROL
NAS 412 : 1997 FOREIGN OBJECT DAMAGE (FOD) PREVENTION GUIDANCE DOCUMENT
ASTM E 2024 : 2005 Standard Test Methods for Atmospheric Leaks Using a Thermal Conductivity Leak Detector
ASTM E 1955 : 2004 : R2014 Standard Radiographic Examination for Soundness of Welds in Steel by Comparison to Graded ASTM <astmref rid="a00002"/> Reference Radiographs
ASTM E 569/E569M : 2013 : REDLINE Standard Practice for Acoustic Emission Monitoring of Structures During Controlled Stimulation
SAE AMS 2631 : 2017 ULTRASONIC INSPECTION, TITANIUM AND TITANIUM ALLOY BAR, BILLET AND PLATE
ASTM E 709 : 2015 : REDLINE Standard Guide for Magnetic Particle Testing
ASTM E 2104 : 2015 : REDLINE Standard Practice for Radiographic Examination of Advanced Aero and Turbine Materials and Components
ASTM E 751/E751M : 2017 : REDLINE Standard Practice for Acoustic Emission Monitoring During Resistance Spot-Welding
ASTM E 1931 : 2016 : REDLINE Standard Guide for Non-computed X-Ray Compton Scatter Tomography
BS ISO 24394 : 2008 WELDING FOR AEROSPACE APPLICATIONS - QUALIFICATION TEST FOR WELDERS AND WELDING OPERATORS - FUSION WELDING OF METALLICCOMPONENTS
ASTM E 1418 : 2016 : REDLINE Standard Practice for Visible Penetrant Testing Using the Water-Washable Process
ASTM E 1359 : 2017 : REDLINE Standard Guide for Auditing and Evaluating Capabilities of Nondestructive Testing Agencies
ASTM E 749/E749M : 2017 : REDLINE Standard Practice for Acoustic Emission Monitoring During Continuous Welding
ASTM E 2479 : 2016 : REDLINE Standard Practice for Measuring the Ultrasonic Velocity in Polyethylene Tank Walls Using Lateral Longitudinal (L<inf>CR</inf>) Waves
ASTM E 1496 : 2005 Standard Test Method for Neutron Radiographic Dimensional Measurements
ASTM E 1210 : 2016 : REDLINE Standard Practice for Fluorescent Liquid Penetrant Testing Using the Hydrophilic Post-Emulsification Process
ASTM E 2373/E2373M : 2014 : REDLINE Standard Practice for Use of the Ultrasonic Time of Flight Diffraction (TOFD) Technique
ASTM E 543 : 2015 : REDLINE Standard Specification for Agencies Performing Nondestructive Testing
ASTM E 1888/E1888M : 2017 : REDLINE Standard Practice for Acoustic Emission Examination of Pressurized Containers Made of Fiberglass Reinforced Plastic with Balsa Wood Cores
BS ISO 19828:2017 Welding for aerospace applications. Visual inspection of welds
I.S. EN 4179:2017 AEROSPACE SERIES - QUALIFICATION AND APPROVAL OF PERSONNEL FOR NON-DESTRUCTIVE TESTING
NACE TM 02 84 : 2016 EVALUATION OF PIPELINE AND PRESSURE VESSEL STEELS FOR RESISTANCE TO HYDROGEN-INDUCED CRACKING
MIL-HDBK-115 Revision C:2016 U.S. ARMY REVERSE ENGINEERING HANDBOOK (GUIDELINES AND PROCEDURES)
MIL-HDBK-1823 Revision A:2009 NONDESTRUCTIVE EVALUATION SYSTEM, RELIABILITY ASSESSMENT
SAE AS 6081 : 2012 FRAUDULENT/COUNTERFEIT ELECTRONIC PARTS: AVOIDANCE, DETECTION, MITIGATION, AND DISPOSITION - DISTRIBUTORS
ASTM E 214 : 2005 Standard Practice for Immersed Ultrasonic Testing by the Reflection Method Using Pulsed Longitudinal Waves (Withdrawn 2007)
MIL-STD-1537 Revision C:2002 Electrical Conductivity Test for Verification of Heat Treatment of Aluminum Alloys, Eddy Current Method
ASTM E 1220 : 2016 : REDLINE Standard Practice for Visible Penetrant Testing Using Solvent-Removable Process
ASTM E 1118/E1118M : 2016 : REDLINE Standard Practice for Acoustic Emission Examination of Reinforced Thermosetting Resin Pipe (RTRP)
ASTM E 1817 : 2008 : R2014 Standard Practice for Controlling Quality of Radiological Examination by Using Representative Quality Indicators (RQIs)
SAE ARP 6178 : 2011 FRAUDULENT/COUNTERFEIT ELECTRONIC PARTS - TOOL FOR RISK ASSESSMENT OF DISTRIBUTORS
ASTM E 797/E797M : 2015 : REDLINE Standard Practice for Measuring Thickness by Manual Ultrasonic Pulse-Echo Contact Method
ASTM E 1030/E1030M : 2015 : REDLINE Standard Practice for Radiographic Examination of Metallic Castings
ASTM E 2985/E2985M : 2014 Standard Practice for Determination of Metal Purity Based on Elastic Constant Measurements Derived from Resonant Ultrasound Spectroscopy
ASTM E 1774 : 2017 : REDLINE Standard Guide for Electromagnetic Acoustic Transducers (EMATs)
ASTM E 2981 : 2015 Standard Guide for Nondestructive Testing of the Composite Overwraps in Filament Wound Pressure Vessels Used in Aerospace Applications
ASTM E 493/E493M : 2011 Standard Practice for Leaks Using the Mass Spectrometer Leak Detector in the Inside-Out Testing Mode
ASTM E 2096/E2096M : 2016 : REDLINE Standard Practice for In Situ Examination of Ferromagnetic Heat-Exchanger Tubes Using Remote Field Testing
ASTM E 1030 : 2005 Standard Test Method for Radiographic Examination of Metallic Castings
ASTM E 1208 : 2016 : REDLINE Standard Practice for Fluorescent Liquid Penetrant Testing Using the Lipophilic Post-Emulsification Process
ASTM E 1209 : 2010 Standard Practice for Fluorescent Liquid Penetrant Testing Using the Water-Washable Process
ASTM B 247 : 2015 : REDLINE Standard Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings
ASTM E 2580 : 2017 : REDLINE Standard Practice for Ultrasonic Testing of Flat Panel Composites and Sandwich Core Materials Used in Aerospace Applications
ASTM E 2662 : 2015 : REDLINE Standard Practice for Radiographic Examination of Flat Panel Composites and Sandwich Core Materials Used in Aerospace Applications
ASTM E 1742/E1742M : 2018 : REDLINE Standard Practice for Radiographic Examination
ASTM E 1033 : 2013 : REDLINE Standard Practice for Electromagnetic (Eddy Current) Examination of Type F-Continuously Welded (CW) Ferromagnetic Pipe and Tubing Above the Curie Temperature
ASTM E 1219 : 2016 : REDLINE Standard Practice for Fluorescent Liquid Penetrant Testing Using the Solvent-Removable Process
ASTM E 1496 : 2005 : R2010 Standard Test Method for Neutron Radiographic Dimensional Measurements (Withdrawn 2012)
ASTM E 2884 : 2017 : REDLINE Standard Guide for Eddy Current Testing of Electrically Conducting Materials Using Conformable Sensor Arrays
ASTM E 1211/E1211M : 2017 : REDLINE Standard Practice for Leak Detection and Location Using Surface-Mounted Acoustic Emission Sensors
ASTM E 1161 : 2009 : R2014 Standard Practice for Radiologic Examination of Semiconductors and Electronic Components
DIN ISO 24394:2013-12 WELDING FOR AEROSPACE APPLICATIONS - QUALIFICATION TEST FOR WELDERS AND WELDING OPERATORS - FUSION WELDING OF METALLIC COMPONENTS (ISO 24394:2008 + AMD. 1:2013)
BS EN 16603-32-01:2014 Space engineering. Fracture control
MIL-HDBK-6870 Revision B:2012 NONDESTRUCTIVE INSPECTION PROGRAM REQUIREMENTS FOR AIRCRAFT AND MISSILE MATERIALS AND PARTS
NASA SSTD 8070 0013 : 2015 CLASSES OF WELDING INSPECTION
NASA MSFC RQMT 3479 : 2006 FRACTURE CONTROL REQUIREMENTS FOR COMPOSITE AND BONDED VEHICLE AND PAYLOAD STRUCTURES
NASA PRC 0001 : 2012 PROCESS SPECIFICATION FOR THE MANUAL ARC WELDING OF ALUMINUM ALLOY HARDWARE
NASA PRC 6510 : 2011 PROCESS SPECIFICATION FOR ULTRASONIC INSPECTION OF WELDS
NASA STD 6016(INT) : 2006 STANDARD MATERIALS AND PROCESSES REQUIREMENTS FOR SPACECRAFT
NASA PRC 6509 : 2011 PROCESS SPECIFICATION FOR EDDY CURRENT INSPECTION
NASA PRC 6506 : 2011 PROCESS SPECIFICATION FOR LIQUID PENETRANT INSPECTION
NASA PRC 6505 : 2011 PROCESS SPECIFICATION FOR MAGNETIC PARTICLE INSPECTION
NASA PRC 0015 : 2016 PROCESS SPECIFICATION FOR AUTOMATIC AND MACHINE ARC WELDING OF TITANIUM AND TITANIUM ALLOY HARDWARE
MIL-HDBK-6870 Revision C:2020 NONDESTRUCTIVE INSPECTION PROGRAM REQUIREMENTS FOR AIRCRAFT AND MISSILE MATERIALS AND PARTS
NASA KSC DE 512-SM : 2012 FACILITY SYSTEMS, GROUND SUPPORT SYSTEMS, AND GROUND SUPPORT EQUIPMENT GENERAL DESIGN REQUIREMENTS
NASA STD 5005 : 2013 STANDARD FOR THE DESIGN AND FABRICATION OF GROUND SUPPORT EQUIPMENT
NASA STD 6016 : 2016 STANDARD MATERIALS AND PROCESSES REQUIREMENTS FOR SPACECRAFT
NASA STD 5006 : 2015 GENERAL FUSION WELDING REQUIREMENTS FOR AEROSPACE MATERIALS
NASA PRC 0010 : 2012 PROCESS SPECIFICATION FOR AUTOMATIC AND MACHINE ARC WELDING OF STEEL AND NICKEL ALLOY HARDWARE
NASA PRC 0005 : 2012 PROCESS SPECIFICATION FOR THE MANUAL ARC WELDING OF CARBON STEEL AND NICKEL ALLOY HARDWARE
NASA PRC 6503 : 2011 PROCESS SPECIFICATION FOR RADIOGRAPHIC INSPECTION
NASA PRC 0002 : 2012 PROCESS SPECIFICATION FOR THE MANUAL ARC WELDING OF TITANIUM ALLOY HARDWARE
NASA PRC 0014 : 2012 PROCESS SPECIFICATION FOR FRICTION STIR WELDING
NASA JSC 27301 : 2009 MATERIALS AND PROCESSES SELECTION, CONTROL, AND IMPLEMENTATION PLAN FOR JSC FLIGHT HARDWARE
NASA GSFC STD 7000 : 2013 GENERAL ENVIRONMENTAL VERIFICATION STANDARD (GEVS) FOR GSFC FLIGHT PROGRAMS AND PROJECTS
MIL-DTL-2156 Revision D:2010 CHARGE, DEMOLITION, SHAPED, 15 LB. - M2A4 LOADING, ASSEMBLING AND PACKING
UNI EN 4678 : 2012 AEROSPACE SERIES - WELDMENTS AND BRAZEMENTS FOR AEROSPACE STRUCTURES - JOINTS OF METALLIC MATERIALS BY LASER BEAM WELDING - QUALITY OF WELDMENTS
ASTM E 215 : 2016 : REDLINE Standard Practice for Standardizing Equipment and Electromagnetic Examination of Seamless Aluminum-Alloy Tube
NASA STD 5009 : 2008 NONDESTRUCTIVE EVALUATION REQUIREMENTS FOR FRACTURE-CRITICAL METALLIC COMPONENTS - MEASUREMENT SYSTEM IDENTIFICATION: METRIC (INCH-POUND)
ASTM E 114 : 2015 : REDLINE Standard Practice for Ultrasonic Pulse-Echo Straight-Beam Contact Testing
ASTM E 1312 : 2009 Standard Practice for Electromagnetic (Eddy-Current) Examination of Ferromagnetic Cylindrical Bar Product Above the Curie Temperature
AWS B5.4 : 2005 SPECIFICATION FOR THE QUALIFICATION OF WELDER TEST FACILITIES
ASTM E 587 : 2015 : REDLINE Standard Practice for Ultrasonic Angle-Beam Contact Testing
ISO 19828:2017 Welding for aerospace applications — Visual inspection of welds
ASTM E 1603/E1603M : 2011 Standard Practice for Leakage Measurement Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Hood Mode
AWS C7.3 : 2016 PROCESS SPECIFICATION FOR ELECTRON BEAM WELDING
ASTM E 3052 : 2016 Standard Practice for Examination of Carbon Steel Welds Using Eddy Current Array
SAE AMS I 83387 : 2016 INSPECTION PROCESS, MAGNETIC RUBBER
SAE AMS 2175 : 2010 CASTINGS, CLASSIFICATION AND INSPECTION OF
ASTM E 1571 : 2011 Standard Practice for Electromagnetic Examination of Ferromagnetic Steel Wire Rope
ASTM E 493 : 2006 Standard Test Methods for Leaks Using the Mass Spectrometer Leak Detector in the Inside-Out Testing Mode
NASA STD 8719.9 : 2015 LIFTING STANDARD
ASTM E 1417/E1417M : 2016 : REDLINE Standard Practice for Liquid Penetrant Testing
ASTM E 2033 : 2017 : REDLINE Standard Practice for Radiographic Examination Using Computed Radiography (Photostimulable Luminescence Method)
ASTM E 426 : 2016 : REDLINE Standard Practice for Electromagnetic (Eddy Current) Examination of Seamless and Welded Tubular Products, Titanium, Austenitic Stainless Steel and Similar Alloys
ASTM E 2076 : 2005 Standard Test Method for Examination of Fiberglass Reinforced Plastic Fan Blades Using Acoustic Emission
ASTM E 1212 : 2017 : REDLINE Standard Practice for Establishing Quality Management Systems for Nondestructive Testing Agencies
ASTM E 1067/E1067M : 2018 : REDLINE Standard Practice for Acoustic Emission Examination of Fiberglass Reinforced Plastic Resin (FRP) Tanks/Vessels
ASTM E 1814 : 2014 : REDLINE Standard Practice for Computed Tomographic (CT) Examination of Castings
ASTM E 1930/E1930M : 2017 : REDLINE Standard Practice for Examination of Liquid-Filled Atmospheric and Low-Pressure Metal Storage Tanks Using Acoustic Emission
ASTM E 1001 : 2016 : REDLINE Standard Practice for Detection and Evaluation of Discontinuities by the Immersed Pulse-Echo Ultrasonic Method Using Longitudinal Waves
ASTM E 2338 : 2017 : REDLINE Standard Practice for Characterization of Coatings Using Conformable Eddy Current Sensors without Coating Reference Standards
ASTM E 664/E664M : 2015 : REDLINE Standard Practice for the Measurement of the Apparent Attenuation of Longitudinal Ultrasonic Waves by Immersion Method
ASTM E 2375 : 2016 : REDLINE Standard Practice for Ultrasonic Testing of Wrought Products
ASTM E 1736 : 2015 : REDLINE Standard Practice for Acousto-Ultrasonic Assessment of Filament-Wound Pressure Vessels
ASTM E 493/E493M : 2011 : R2017 Standard Practice for Leaks Using the Mass Spectrometer Leak Detector in the Inside-Out Testing Mode
ASTM E 1603 : 1999 Standard Test Methods for Leakage Measurement Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Hood Mode
17/30337995 DC : DRAFT MAY 2017 BS ISO 24394 - WELDING FOR AEROSPACE APPLICATIONS - QUALIFICATION TEST FOR WELDERS AND WELDING OPERATORS - FUSION WELDING OF METALLIC COMPONENTS
14/30302071 DC : 0 BS EN 4179 - AEROSPACE SERIES - QUALIFICATION AND APPROVAL OF PERSONNEL FOR NON-DESTRUCTIVE TESTING
07/30141879 DC : 0 ISO 24394 - WELDING IN AEROSPACE - QUALIFICATION TEST FOR WELDERS AND WELDING OPERATORS - WELDING OF METALLIC COMPONENTS
03/311008 DC : DRAFT JUNE 2003 EN 14165 - SPACE ENGINEERING STANDARDS - FRACTURE CONTROL
16/30337634 DC : DRAFT APR 2016 BS ISO 19828 - WELDING FOR AEROSPACE APPLICATIONS - VISUAL INSPECTION OF WELDS
02/709089 DC : DRAFT JULY 2002 PREN 4179 - AEROSPACE SERIES - QUALIFICATION AND APPROVAL OF PERSONNEL FOR NON-DESTRUCTIVE TESTING
BS EN 14165:2004 Space engineering standards. Fracture control
EN 4678:2011 Aerospace series - Weldments and brazements for aerospace structures - Joints of metallic materials by laser beam welding - Quality of weldments
EN 14165:2004 Space engineering standards - Fracture control
ISO 24394:2008 Welding for aerospace applications Qualification test for welders and welding operators Fusion welding of metallic components
SAE AMS 2628 : 2013 ULTRASONIC IMMERSION INSPECTION, TITANIUM AND TITANIUM ALLOY BILLET, PREMIUM GRADE
NASA STD 5009(INT) : 2006 NONDESTRUCTIVE EVALUATION REQUIREMENTS FOR FRACTURE CRITICAL METALLIC COMPONENTS
ASTM E 571 : 2012 : REDLINE Standard Practice for Electromagnetic (Eddy-Current) Examination of Nickel and Nickel Alloy Tubular Products
SAE AMS 2647F : 2017 FLUORESCENT PENETRANT INSPECTION, AIRCRAFT AND ENGINE COMPONENT MAINTENANCE
NASA MSFC SPEC 3679 : 2012 PROCESS SPECIFICATION - WELDING AEROSPACE HARDWARE
ASTM F 629 : 2015 : REDLINE Standard Practice for Radiography of Cast Metallic Surgical Implants
ASTM E 1955 : 2004 Standard Radiographic Examination for Soundness of Welds in Steel by Comparison to Graded ASTM E 390 Reference Radiographs
ASTM E 2906/E2906M : 2013 Standard Practice for Acoustic Pulse Reflectometry Examination of Tube Bundles
AWS D17.3/D17.3M : 2016 SPECIFICATION FOR FRICTION STIR WELDING OF ALUMINUM ALLOYS FOR AEROSPACE APPLICATIONS
ASTM E 2930 : 2013 Standard Practice for Pressure Decay Leak Test Method
SAE AMS A 22771 : 2018 ALUMINUM ALLOY FORGINGS, HEAT TREATED
ASTM E 2076/E2076M : 2015 : REDLINE Standard Practice for Examination of Fiberglass Reinforced Plastic Fan Blades Using Acoustic Emission
ASTM E 1161 : 2009 Standard Practice for Radiologic Examination of Semiconductors and Electronic Components
SAE AS 6171/5 : 2016 TECHNIQUES FOR SUSPECT/COUNTERFEIT EEE PARTS DETECTION BY RADIOLOGICAL TEST METHODS
ASTM E 1570 : 2011 : REDLINE PRACTICE FOR COMPUTED TOMOGRAPHIC (CT) EXAMINATION
ASTM E 2478 : 2011 : R2016 Standard Practice for Determining Damage-Based Design Stress for Glass Fiber Reinforced Plastic (GFRP) Materials Using Acoustic Emission
ASTM E 2905/E2905M : 2013 : REDLINE PRACTICE FOR EXAMINATION OF MILL AND KILN GIRTH GEAR TEETH - ELECTROMAGNETIC METHODS
ASTM E 2982 : 2014 Standard Guide for Nondestructive Testing of Thin-Walled Metallic Liners in Filament-Wound Pressure Vessels Used in Aerospace Applications
ASTM E 1255 : 2016 : REDLINE Standard Practice for Radioscopy
ASTM E 494 : 2015 : REDLINE Standard Practice for Measuring Ultrasonic Velocity in Materials
ASTM E 1118 : 2005 Standard Practice for Acoustic Emission Examination of Reinforced Thermosetting Resin Pipe (RTRP)
ASTM C 1332 : 2018 : REDLINE Standard Practice for Measurement of Ultrasonic Attenuation Coefficients of Advanced Ceramics by Pulse-Echo Contact Technique
ASTM E 1139/E1139M : 2017 : REDLINE Standard Practice for Continuous Monitoring of Acoustic Emission from Metal Pressure Boundaries
ASTM E 1606 : 2015 : REDLINE Standard Practice for Electromagnetic (Eddy Current) Examination of Copper and Aluminum Redraw Rod for Electrical Purposes
ASTM E 2478 : 2011 Standard Practice for Determining Damage-Based Design Stress for Glass Fiber Reinforced Plastic (GFRP) Materials Using Acoustic Emission
UNE-EN 4179:2017 Aerospace series - Qualification and approval of personnel for non-destructive testing
I.S. EN 4678:2011 AEROSPACE SERIES - WELDMENTS AND BRAZEMENTS FOR AEROSPACE STRUCTURES - JOINTS OF METALLIC MATERIALS BY LASER BEAM WELDING - QUALITY OF WELDMENTS
13/30275166 DC : 0 BS EN ISO 18490 - NON-DESTRUCTIVE TESTING - EVALUATION OF VISION ACUITY OF NDT PERSONNEL
DIN EN 14165:2005-02 SPACE ENGINEERING STANDARDS - FRACTURE CONTROL
EN 16603-32-01:2014 Space engineering - Fracture control
EN 4179:2017 Aerospace series - Qualification and approval of personnel for non-destructive testing

View more information

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.