ELECTRICAL GROUND SUPPORT EQUIPMENT FABRICATION, SPECIFICATION FOR

Published date

01-01-2009

Publisher

National Aeronautics and Space Administration

1. SCOPE
2. APPLICABLE DOCUMENTS
3. REQUIREMENTS
4. QUALITY ASSURANCE PROVISIONS
5. PREPARATION FOR DELIVERY
6. NOTES

Describes parts, materials, and processes used in the fabrication, maintenance, repair, and procurement of electrical and electronic control and monitoring equipment associated with ground support equipment (GSE) at the John F. Kennedy Space Center (KSC).

DocumentType	Standard
PublisherName	National Aeronautics and Space Administration
Status	Current

NASA KSC STD Z 0006 : 1995	DESIGN OF HYPERGOLIC PROPELLANTS GROUND SUPPORT EQUIPMENT, STANDARD FOR
NASA KSC STD E 0012 : 2013	FACILITY GROUNDING AND LIGHTNING PROTECTION, STANDARD FOR
NASA STD 5005 : 2013	STANDARD FOR THE DESIGN AND FABRICATION OF GROUND SUPPORT EQUIPMENT
NASA KSC E 166 : 2009	INSTALLATION AND ASSEMBLY, ELECTRICAL GROUND SUPPORT EQUIPMENT (GSE) SPECIFICATION FOR
NASA KSC STD E 0022 : 2013	BONDING, GROUNDING, SHIELDING, ELECTROMAGNETIC INTERFERENCE, LIGHTNING AND TRANSIENT PROTECTION, DESIGN REQUIREMENTS FOR GROUND SYSTEMS
NASA KSC STD Z 0007 : 1973	DESIGN OF HYDROCARBON FUEL GROUND SUPPORT EQUIPMENT, STANDARD FOR
NASA KSC DE 512-SM : 2012	FACILITY SYSTEMS, GROUND SUPPORT SYSTEMS, AND GROUND SUPPORT EQUIPMENT GENERAL DESIGN REQUIREMENTS
NASA KSC STD E 0001 : 2008	DESIGN OF ELECTRICAL CONTROL AND MONITORING SYSTEMS, EQUIPMENT (GSE), AND PANELS, STANDARD FOR
NASA KSC SPEC E 0002 : 2010	MODULAR ELECTRICAL ENCLOSURES, RACKS, CONSOLES, AND ACCESSORIES, SPECIFICATION FOR
NASA KSC GP 864 VOL 2A : 2009	ELECTRICAL GROUND SUPPORT EQUIPMENT CABLE HANDBOOK
NASA KSC STD 132 : 2008	POTTING AND MOLDING ELECTRICAL CABLE ASSEMBLY TERMINATIONS, STANDARD FOR
NASA KSC W 167 : 1994	WIRING PROGRAMMING SYSTEM PATCHBOARDS, SPECIFICATION FOR
NASA KSC STD E 0004 : 2008	PNEUMATIC AND HYDRAULIC MECHANICAL COMPONENTS, ELECTRICAL DESIGN, STANDARD FOR
NASA KSC STD Z 0005 : 1988	DESIGN OF PNEUMATIC GROUND-SUPPORT EQUIPMENT, STANDARD FOR

SAE AMS I 7444 : 2013	INSULATION SLEEVING, ELECTRICAL, FLEXIBLE
MS21981 Revision D:1982	FERRULE, INNER, UNINSULATED, SHIELD TERMINATING, TYPE 1 TWO PIECE, CLASS 1, FOR SHIELDED CABLE
SAE AMS DTL 23053/5A : 2012	INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE, POLYOLEFIN, FLEXIBLE, CROSSLINKED
QPL AS 50151 : 20171003	QUALIFIED PRODUCT LIST OF PRODUCTS QUALIFIED UNDER PERFORMANCE SPECIFICATION - SAE-AS50151 - CONNECTORS, ELECTRICAL, CIRCULAR THREADED, AN TYPE, GENERAL SPECIFICATION FOR
SAE AS 83519 : 2015	SHIELD TERMINATION, SOLDER STYLE, INSULATED, HEAT-SHRINKABLE, ENVIRONMENT RESISTANT GENERAL SPECIFICATION FOR
MIL-A-22262 Revision B:1993	ABRASIVE BLASTING MEDIA SHIP HULL BLAST CLEANING
IPC 6011 : 0	GENERIC PERFORMANCE SPECIFICATION FOR PRINTED BOARDS
MS27466 Revision K:2012	CONNECTORS, RECEPTACLE, ELECTRICAL, WALL MOUNTING FLANGE, CRIMP TYPE, BAYONET COUPLING, SERIES 1
MIL-STD-129 Revision R:2014	Military Marking for Shipment and Storage
NASA STD 8739.5 : 2015	WORKMANSHIP STANDARD FOR FIBER OPTIC TERMINATIONS, CABLE ASSEMBLIES, AND INSTALLATION
MIL-DTL-55302 Revision G:2009	CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES
NASA KSC SPEC E 0031 : 2008	CABLES, ELECTRICAL, SPECIFICATION FOR
NASA KSC E 166 : 2009	INSTALLATION AND ASSEMBLY, ELECTRICAL GROUND SUPPORT EQUIPMENT (GSE) SPECIFICATION FOR
NASA STD 8739.1 : 2016	WORKMANSHIP STANDARD FOR POLYMERIC APPLICATION ON ELECTRONIC ASSEMBLIES
NAS1744:2014	SPLICE, CONDUCTOR, SOLDER STYLE, HOT AIR OR INFRARED, SHRINKABLE, INSULATED, IMMERSION RESISTANT
MIL-DTL-24308 Revision G:2009	Connectors, Electric, Rectangular, Nonenvironmental, Miniature, Polarized Shell, Rack and Panel, General Specification for
MIL-W-81822 Revision A:1982	WIRE, ELECTRICAL, SOLDERLESS WRAP, INSULATED AND UNINSULATED, GENERAL SPECIFICATION FOR
NASA STD 6001 : 2011	FLAMMABILITY, OFFGASSING, AND COMPATIBILITY REQUIREMENTS AND TEST PROCEDURES
NASA KSC GP 864 VOL 2A : 2009	ELECTRICAL GROUND SUPPORT EQUIPMENT CABLE HANDBOOK
MIL-DTL-26482 Revision H:2007	Connectors, Electrical, Circular, Miniature, Quick Disconnect, Environment Resisting, Receptacles and Plugs, General Specification for
IPC J STD 001 : F	REQUIREMENTS FOR SOLDERED ELECTRICAL AND ELECTRONIC ASSEMBLIES
NASA KSC SPEC E 0024 : 2008	CABLE, ELECTRICAL, SHIELDED, JACKETED, FOR HARNESS ASSEMBLIES, GENERAL SPECIFICATION FOR
TIA 440 : C2017	FIBER OPTIC TERMINOLOGY
ANSI/NCSL Z540 3 : 2006(R2013)	REQUIREMENTS FOR THE CALIBRATION OF MEASURING AND TEST EQUIPMENT
MIL-STD-2073-1 Revision E:2008	STANDARD PRACTICE FOR MILITARY PACKAGING
UL 444:5ED 2017-01	Communications Cables
MS21980 Revision E:1982	FERRULE, OUTER, UNINSULATED, SHIELD TERMINATING, TYPE 1 TWO PIECE, CLASS 1, FOR SHIELDED CABLE
MIL-DTL-83513 Revision G:2008	Connectors, Electrical, Rectangular, Microminiature, Polarized Shell, General Specification for
NASA KSC NE 9187 : 2008	SENSORS, TRANSDUCERS AND SIGNAL CONDUCTING SYSTEMS SELECTION PROCESS
MIL-DTL-22992 Revision H:2015	Connectors, Plugsand Receptacles, Electrical, Waterproof, Quick Disconnect, Heavy Duty Type, General Specification for
SAE AS 25036 : 2015	TERMINAL, LUG, CRIMP STYLE, COPPER, INSULATED, RING TONGUE, BELL-MOUTHED, TYPE 2, CLASS 1, (FOR 105 DEGREES C TOTAL CONDUCTOR TEMPERATURE)
SAE AMS QQ A 250/11 : 1997	ALUMINUM ALLOY 6061, PLATE AND SHEET
IPC WHMA A 620 : B	REQUIREMENTS AND ACCEPTANCE FOR CABLE AND WIRE HARNESS ASSEMBLIES
NASM25027:2012	NUT, SELF-LOCKING, 250 DEGREES F, 450 DEGREES F, AND 800 DEGREES F
NFPA 496 : 2017	PURGED AND PRESSURIZED ENCLOSURES FOR ELECTRICAL EQUIPMENT
IEC 60947-7-1:2009	Low-voltage switchgear and controlgear - Part 7-1: Ancillary equipment - Terminal blocks for copper conductors
MIL-STD-889 Revision C:2016	DISSIMILAR METALS
IPC HDBK 001 : E	HANDBOOK AND GUIDE TO SUPPLEMENT J-STD-001
MIL P 85891 : A	PLASTIC MEDIA, FOR REMOVAL OF ORGANIC COATINGS
NASA MSFC STD 486 : 1992	STANDARD, THREADED FASTENERS, TORQUE LIMITS FOR
TIA 455-133 : A2003(R2013)	OPTICAL FIBRES - PART 1-22: MEASUREMENT METHODS AND TEST PROCEDURES - LENGTH MEASUREMENT
NASM33540:2003	SAFETY WIRING, SAFETY CABLING, COTTER PINNING, GENERAL PRACTICES FOR
MIL-DTL-5541 Revision F:2006	Chemical Conversion Coatings on Aluminum and Aluminum Alloys
MIL-STD-464 Revision C:2010	ELECTROMAGNETIC ENVIRONMENTAL EFFECTS REQUIREMENTS FOR SYSTEMS
NASA STD 5008 : 2011	PROTECTIVE COATING OF CARBON STEEL, STAINLESS STEEL, AND ALUMINUM ON LAUNCH STRUCTURES, FACILITIES, AND GROUND SUPPORT EQUIPMENT
C22.2 NO. 214-17	Communications cables (Bi-national standard, with UL 444)
A-A-59298 Revision B:2013	Tape, Pressure-Sensitive Adhesive
IEC 60715:2017	Dimensions of low-voltage switchgear and controlgear - Standardized mounting on rails for mechanical support of switchgear, controlgear and accessories
CFR 40(PTS260-299) : JUL 96	PROTECTION OF ENVIRONMENT - ENVIRONMENTAL PROTECTION AGENCY
NASA KSC STD E 0022 : 2013	BONDING, GROUNDING, SHIELDING, ELECTROMAGNETIC INTERFERENCE, LIGHTNING AND TRANSIENT PROTECTION, DESIGN REQUIREMENTS FOR GROUND SYSTEMS
NASA STD 8739.4 : 2016	WORKMANSHIP STANDARD FOR CRIMPING, INTERCONNECTING CABLES, HARNESSES, AND WIRING
NASA KSC DE 512-SM : 2012	FACILITY SYSTEMS, GROUND SUPPORT SYSTEMS, AND GROUND SUPPORT EQUIPMENT GENERAL DESIGN REQUIREMENTS
IPC 2221B:2012	GENERIC STANDARD ON PRINTED BOARD DESIGN
NASA KSC SPEC E 0017 : 1996	ELECTRICAL POWER CABLE, INSTALLATION OF, SPECIFICATION FOR
MIL-DTL-38999 Revision M:2015	Connectors, Electrical, Circular, Miniature, High Density, Quick Disconnect (Bayonet, Threaded or Breech Coupling), Environment Resistant with Crimp Removable Contacts or Hermetically Sealed with Fixed, Solderable Contacts, General Specification for
SAE AMS 2518:2010(S2012)	THREAD COMPOUND, ANTI-SEIZE, GRAPHITE-PETROLATUM
SAE AS 81714 : 2014	TERMINAL JUNCTION SYSTEM (TJS), ENVIRONMENT RESISTANT, GENERAL SPECIFICATION FOR
SSPC-AB 1 : 2015	MINERAL AND SLAG ABRASIVES
MIL-DTL-16878 Revision H:2012	WIRE, ELECTRICAL, INSULATED, GENERAL SPECIFICATION FOR
NASA KSC STD E 0002 : 2009	HAZARDPROOFING OF ELECTRICALLY ENERGIZED EQUIPMENT, STANDARD FOR
NASA KSC STD E 0012 : 2013	FACILITY GROUNDING AND LIGHTNING PROTECTION, STANDARD FOR
NASA KSC SPEC Z 0005 : 1995	BRAZING - STEEL, COPPER, ALUMINIUM, NICKEL, AND MAGNESIUM ALLOYS, SPECIFICATION FOR
MIL-STD-461 Revision G:2015	REQUIREMENTS FOR THE CONTROL OF ELECTROMAGNETIC INTERFERENCE CHARACTERISTICS OF SUBSYSTEMS AND EQUIPMENT
SAE AS 7928 : 2011	TERMINALS, LUG: SPLICES, CONDUCTOR: CRIMP STYLE, COPPER, GENERAL SPECIFICATION FOR
SAE AS 50861 : 2011	WIRE, ELECTRIC, POLYVINYL CHLORIDE INSULATED, COPPER OR COPPER ALLOY
NFPA 70 : 2017	NATIONAL ELECTRICAL CODE
SAE AMS I 23053/2 : 2000	INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE, POLYVINYL CHLORIDE, FLEXIBLE, CROSSLINKED AND NON-CROSSLINKED
CFR 29(PT1910.1000 TO END) : 0	LABOR - OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR
MIL DTL 17 : J	CABLES, RADIO FREQUENCY, FLEXIBLE AND SEMIRIGID, GENERAL SPECIFICATION FOR
NASA KSC SPEC E 0002 : 2010	MODULAR ELECTRICAL ENCLOSURES, RACKS, CONSOLES, AND ACCESSORIES, SPECIFICATION FOR
NASA KSC STD E 0015 : 1992	MARKING OF GROUND SUPPORT EQUIPMENT, STANDARD FOR
SAE AMS DTL 23053 : 1999	INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE, GENERAL SPECIFICATION FOR
NASM 35333 : 2003	WASHER, LOCK, FLAT, INTERNAL TOOTH
ISO 10012:2003	Measurement management systems — Requirements for measurement processes and measuring equipment
SAE AS 27212 : 2011	TERMINAL BOARD ASSEMBLY, MOLDED-IN-STUD, ELECTRIC
A-A-59125 Revision B:2012	Terminal Boards, Molded, Barrier Screw and Stud Types and Associated Accessories
SAE AS 8660 : 1999	SILICONE COMPOUND NATO CODE NUMBER S-736
SAE AMS 2695 : 2013	CONNECTIONS, ELECTRICAL SOLDERLESS, WIRE-WRAPPED
NASA KSC STD E 0010 : 1994	SOLDERING OF ELECTRICAL CONNECTIONS (HAND OR MACHINE), STANDARD FOR
IPC 7711/21 : B	REWORK, MODIFICATION AND REPAIR OF ELECTRONIC ASSEMBLIES
IPC 2222 : A	SECTIONAL DESIGN STANDARD FOR RIGID ORGANIC PRINTED BOARDS
NASA STD 5005 : 2013	STANDARD FOR THE DESIGN AND FABRICATION OF GROUND SUPPORT EQUIPMENT
QPL 46058 : 20171031	QUALIFIED PRODUCT LIST OF PRODUCTS QUALIFIED UNDER PERFORMANCE SPECIFICATION - MIL-I-46058 - INSULATING COMPOUND, ELECTRICAL (FOR COATING PRINTED CIRCUIT ASSEMBLIES)
SAE AMS DTL 23053/1 : 2012	INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE, CROSSLINKED CHLORINATED POLYOLEFIN, FLEXIBLE
NASA MSFC STD 156 : 1962	RIVETING, FABRICATING AND INSPECTION, STANDARD FOR
SAE AMS DTL 23053/15 : 2012	INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE, POLYOLEFIN, HEAVY-WALL, COATED, FLEXIBLE, OUTER WALL CROSSLINKED
NASA SPEC 5004 : 0	WELDING OF AEROSPACE GROUND SUPPORT EQUIPMENT AND RELATED NONCONVENTIONAL FACILITIES
SAE AS 21608 : 2012	FERRULE, SHIELD TERMINATING, CRIMP STYLE
MIL-STD-202 Revision H:2015	ELECTRONIC AND ELECTRICAL COMPONENT PARTS
A-A-59126 Revision B:2012	Terminals, Feedthru (Insulated) and Terminals, Stud (Insulated and Noninsulated)
SAE AS 22520 : 2011	CRIMPING TOOLS, WIRE TERMINATION, GENERAL SPECIFICATION FOR
SSPC-SP 5 : 2015	WHITE METAL BLAST CLEANING
TIA 455-78 : B2002	FOTP-78 - IEC 60793-1-40 - OPTICAL FIBRES - PART 1-40: MEASUREMENT METHODS AND TEXT PROCEDURES - ATTENUATION
NASA KSC STD E 0021 : 2002	KSC TELECOMMUNICATION PREMISES DISTRIBUTION SYSTEMS, DESIGN OF, STANDARD FOR
A-A-59569 Revision C:2009	BRAID, WIRE (COPPER, TIN-COATED, SILVER-COATED, OR NICKEL COATED, TUBULAR OR FLAT)
NASA KSC STD 132 : 2008	POTTING AND MOLDING ELECTRICAL CABLE ASSEMBLY TERMINATIONS, STANDARD FOR
SAE AS 81824 1 : 2013	SPLICE, IN-LINE, ELECTRIC, CRIMP, SN/CU, ENVIRONMENTAL, HEAT-SHRINKABLE SLEEVE (150 DEGREES C), 1 X 1 SEALANT OPENING
FED-STD-595 Revision C:2008	COLORS USED IN GOVERNMENT PROCUREMENT
A-A-59551 Revision A:2009	WIRE, ELECTRICAL, COPPER (UNINSULATED)
MIL-PRF-46010 Revision H:2013	LUBRICANT, SOLID FILM, HEAT CURED, CORROSION INHIBITING NATO CODE S-1738
NFPA 497 : 2017	CLASSIFICATION OF FLAMMABLE LIQUIDS, GASES, OR VAPORS AND OF HAZARDOUS (CLASSIFIED) LOCATIONS FOR ELECTRICAL INSTALLATIONS IN CHEMICAL PROCESS AREAS
IPC 6012 : C	QUALIFICATION AND PERFORMANCE SPECIFICATION FOR RIGID PRINTED BOARDS