TEST METHODS FOR ACCESSORIES FOR POWER CABLES WITH RATED VOLTAGES FROM 6 KV (UM = 7,2 KV) UP TO 36 KV (UM = 42 KV)

Published date

01-12-2013

Publisher

1 Scope
2 Normative references
3 Test installations and conditions
4 AC voltage tests
   4.1 Dry test for all accessories
   4.2 Wet test for outdoor terminations
   4.3 Test in water for stop ends
5 DC voltage tests
   5.1 Installation
   5.2 Method
6 Impulse voltage tests
   6.1 Installation
   6.2 Method
   6.3 Test at elevated temperature
7 Partial discharge test
   7.1 Method
   7.2 Test at elevated temperature
8 Tests at elevated temperature
   8.1 Installation and connection
   8.2 Measurement of temperature
9 Heating cycles voltage test
   9.1 Installation and method
   9.2 Test in air
   9.3 Test in water
   9.4 Immersion test for outdoor terminations
10 Thermal short-circuit test (screen)
   10.1 Installation
   10.2 Method
11 Thermal short-circuit test (conductor)
   11.1 Installation
   11.2 Method
12 Dynamic short-circuit test
   12.1 Installation
   12.2 Method
13 Humidity and salt fog tests
   13.1 Apparatus
   13.2 Installation
   13.3 Method
14 Impact test at ambient temperature
15 Screen resistance measurement
   15.1 Installation
   15.2 Method
16 Screen leakage current measurement
   16.1 Installation
   16.2 Method
17 Screen fault current initiation test
   17.1 Installation
   17.2 Method
18 Operating force test
   18.1 Installation
   18.2 Method
19 Operating eye test
   19.1 Installation
   19.2 Method
20 Capacitive test point performance
   20.1 Installation
   20.2 Test method
Annex A (informative) Determination of the cable
         conductor temperature
         A.1 Purpose
         A.2 Calibration of the test cable conductor temperature
         A.3 Heating for accessory test
Annex B (informative) Details of the test chamber and
         spray equipment for humidity and salt fog tests
         B.1 Test chamber
         B.2 Spray equipment for humidity and salt fog tests
         B.3 High voltage transformers
Annex ZA (normative) Normative references to international
         publications with their corresponding European
         publications
Bibliography

Specifies the test methods to be used for type testing accessories for power cables with rated voltages from 6 kV (U[m] = 7,2 kV) up to 36 kV (U[m] = 42 kV).

DevelopmentNote	Indice de classement: C33-005 PR NF EN 61442 April 2005 PR NF EN 61442 Amendment A, April 2005 (04/2005)
DocumentType	Standard
PublisherName	Association Francaise de Normalisation
Status	Current

Standards	Relationship
I.S. EN 61442:2005	Identical
BS EN 61442:2005	Identical
EN 61442:2005	Identical
NBN EN 61442 : 2006	Identical
DIN EN 61442 : 2006	Identical
IEC 61442:2005	Identical
UNE-EN 61442:2005	Identical

NF EN 60885-3 : 2015	ELECTRICAL TEST METHODS FOR ELECTRIC CABLES - PART 3: TEST METHODS FOR PARTIAL DISCHARGE MEASUREMENTS ON LENGTHS OF EXTRUDED POWER CABLES
NF EN 60270 : 2001 AMD 1 2016	HIGH-VOLTAGE TEST TECHNIQUES - PARTIAL DISCHARGE MEASUREMENTS
IEC 60270:2000+AMD1:2015 CSV	High-voltage test techniques - Partial discharge measurements
NF EN 61238-1 : 2003	COMPRESSION AND MECHANICAL CONNECTORS FOR POWER CABLES FOR RATED VOLTAGES UP TO 36 KV (UM = 42 KV) - PART 1: TEST METHODS AND REQUIREMENTS
IEC 60055-1:1997+AMD1:2005 CSV	Paper-insulated metal-sheathed cables for rated voltages up to 18/30 kV (with copper or aluminium conductors and excluding gas-pressure and oil-filled cables) - Part 1: Tests on cables and their accessories
IEC 60986:2000+AMD1:2008 CSV	Short-circuit temperature limits of electric cables with rated voltages from 6 kV (<em>U</em><sub>m</sub> = 7,2 kV) up to 30 kV (<em>U</em><sub>m</sub> = 36 kV)
IEC 60502-2:2014 RLV	Power cables with extruded insulation and their accessories for rated voltages from 1 kV (<em>U</em><sub>m</sub> = 1,2 kV) up to 30 kV (<em>U</em><sub>m</sub> = 36 kV) – Part 2: Cables for rated voltages from 6 kV (<em>U</em><sub>m</sub> = 7,2 kV) up to 30 kV (<em>U</em><sub>m</sub> = 36 kV)
NF EN 60230 : 2003	IMPULSE TESTS ON CABLES AND THEIR ACCESSORIES
NFC 41 101 : 1995	HIGH VOLTAGE TEST TECHNIQUES - PART 1: GENERAL DEFINITIONS AND TEST REQUIREMENTS
IEC 60885-3:2015 RLV	Electrical test methods for electric cables - Part 3: Test methods for partial discharge measurements on lengths of extruded power cables
IEC 60230:1966	Impulse tests on cables and their accessories
IEC 60811-1-2:1985	Common test methods for insulating and sheathing materials of electric cables - Part 1: Methods for general application - Section Two: Thermal ageing methods
IEC 61238-1:2003	Compression and mechanical connectors for power cables for rated voltages up to 30 kV (Um = 36 kV) - Part 1: Test methods and requirements
IEC 60060-1:2010	High-voltage test techniques - Part 1: General definitions and test requirements
NF EN 60811 1-2 : 96 AMD 2 2001	INSULATING AND SHEATHING MATERIALS OF ELECTRIC CABLES - COMMON TEST METHODS - PART 1: GENERAL APPLICATION - SECTION 2: THERMAL AGEING METHODS