• There are no items in your cart

NF EN 61582 : 2006

Current
Current

The latest, up-to-date edition.

RADIATION PROTECTION INSTRUMENTATION - IN VIVO COUNTERS - CLASSIFICATION, GENERAL REQUIREMENTS AND TEST PROCEDURES FOR PORTABLE, TRANSPORTABLE AND INSTALLED EQUIPMENT
Published date

01-12-2013

AVANT-PROPOS
1 Domaine d'application et objet
2 Références normatives
   2.1 Normes internationales
   2.2 Autres références internationales
3 Termes et définitions
4 Classification
   4.1 Classification générale
   4.2 Classification en fonction des gammes d'énergie
   4.3 Classification en fonction de la spécificité de
       la mesure
5 Généralités
   5.1 Description générale du système
   5.2 Méthode de mesure
   5.3 Gamme d'énergie
   5.4 Bruit de fond
   5.5 Domaine de mesure
   5.6 Activité minimale détectable
6 Caractéristiques des équipements de mesure des
   émetteurs de basse énergie
   6.1 Gamme d'énergie (10 keV à 200 keV)
   6.2 Activité minimale détectable
   6.3 Domaine de mesure de l'activité
   6.4 Résolution en énergie
   6.5 Non-linéarité intégrale
   6.6 Niveau du bruit de fond naturel
   6.7 Réponse au rayonnement de référence
7 Caractéristiques des équipements de mesure des
   émetteurs de haute énergie de 100 keV à 3 MeV
   7.1 Activité minimale détectable
   7.2 Echelles de mesure
   7.3 Résolution en énergie
   7.4 Non-linéarité intégrale
   7.5 Niveau du bruit de fond naturel
   7.6 Réponse au rayonnement de référence
   7.7 Activité maximale mesurable
   7.8 Temps de préchauffage
   7.9 Temps de mesure
8 Exigences de performances et procédures d'essai pour la
   mesure des émetteurs de basse énergie
   8.1 Procédures générales d'essai
   8.2 Fluctuations Statistiques
   8.3 Fantomes de référence et sources
   8.4 Caractéristiques de mesure du rayonnement
   8.5 Caractéristiques des performances environnementales
9 Exigences de performance et procédures d'essai pour la
   mesure des émetteurs de haute énergie
   9.1 Procédures générales d'essai
   9.2 Fluctuations statistiques
   9.3 Fantomes de référence et sources
   9.4 Caractéristiques sous rayonnement
   9.5 Caractéristiques des performances environnementales
10 Documentation
Annexe A (informative) Guide pour définir le nombre de
          lectures indépendantes d'un instrument,
          nécessaires pour affirmer une réelle différence
          de l'indication (pour une distribution normale)
Annexe B (normative) Exigences complémentaires et méthode
          d'essai pour les appareils portables ou mobiles
Annexe ZA (normative) Références normatives à d'autres
          publications internationales avec les publications
          européennes correspondantes
Bibliographie

Specifies the classification, general design requirements, performance characteristics and test procedures for in vivo counting systems for detecting trace amounts of radionuclides in the bodies of persons working in nuclear power plants, laboratories and facilities handling radionuclides, and inhabitants living on territory which may be contaminated.

DevelopmentNote
Indice de classement: C19-104 PR NF EN 61582 October 2005. (10/2005)
DocumentType
Standard
PublisherName
Association Francaise de Normalisation
Status
Current

Standards Relationship
IEC 61582:2004 Identical
DIN EN 61582 : 2007 Identical
I.S. EN 61582:2006 Identical
BS EN 61582:2006 Identical
NBN EN 61582 : 2007 Identical
SN EN 61582 : 2006 Identical
EN 61582:2006 Identical

NFS 92 502 : 2013 MEDICAL BIOLOGY ANALYSIS LABORATORY - ANTHROPORADIAMETRIC - LUNGS COUNTINGS - MEASUREMENTS OF LOW ENERGY X AND GAMMA EMITTERS (LESS THAN 200 KEV)
NFS 92 503 : 2013 MEDICAL BIOLOGY ANALYSIS LABORATORY - ANTHROPORADIMETRIC MEASUREMENTS - THYROID COUNTINGS - MEASUREMENTS OF GAMMA EMITTERS OF IODINE ISOTOPES
NFS 92 501 : 2013 LABORATOIRE D'ANALYSES DE BIOLOGIE MEDICALE - MESURES ANTHROPORADIOMETRIQUES - CORPS ENTIER - MESURES DES EMISSIONS GAMMA D'ENERGIE SUPERIEURE A 100 KEV

IEC 60050-394:2007 International Electrotechnical Vocabulary (IEV) - Part 394: Nuclear instrumentation - Instruments, systems, equipment and detectors
NF EN 61187 : 1995 ELECTRICAL AND ELECTRONIC MEASURING EQUIPMENT - DOCUMENTATION
NF EN 60721 3-7 : 95 AMD 1 97 CLASSIFICATION OF ENVIRONMENTAL CONDITIONS - PART 3: CLASSIFICATION OF GROUPS OF ENVIRONMENTAL PARAMETERS AND THEIR SEVERITIES - SECTION 7: PORTABLE AND NON-STATIONARY USE
IEC 60068-2-27:2008 Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock
IEC 61187:1993 Electrical and electronic measuring equipment - Documentation
ISO 11929-4:2001 Determination of the detection limit and decision threshold for ionizing radiation measurements Part 4: Fundamentals and application to measurements by use of linear-scale analogue ratemeters, without the influence of sample treatment
NF EN 61000 4-2 : 2009 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-2: TESTING AND MEASUREMENT TECHNIQUES - ELECTROSTATIC DISCHARGE IMMUNITY TEST
IEC 60721-3-7:1995+AMD1:1996 CSV Classification of environmental conditions - Part 3-7: Classification of groups of environmental parameters and their severities - Portable and non-stationary use
IEC 60721-3-5:1997 Classification of environmental conditions - Part 3: Classificationof groups of environmental parameters and their severities -Section 5: Ground vehicle installations
IEC 61000-4-12 : 3.0 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-12: TESTING AND MEASUREMENT TECHNIQUES - RING WAVE IMMUNITY TEST
NF EN 60068-2-2 : 2007 ENVIRONMENTAL TESTING - PART 2-2: TESTS - TESTS B: DRY HEAT
IEC 61000-4-6 : 4.0 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-6: TESTING AND MEASUREMENT TECHNIQUES - IMMUNITY TO CONDUCTED DISTURBANCES, INDUCED BY RADIO-FREQUENCY FIELDS
ISO 11929-1:2000 Determination of the detection limit and decision threshold for ionizing radiation measurements Part 1: Fundamentals and application to counting measurements without the influence of sample treatment
NF EN 60068-2-1 : 2007 ENVIRONMENTAL TESTING - PART 2-1: TESTS - TESTS A: COLD
NFC 01 394 : 2007 INTERNATIONAL ELECTROTECHNICAL VOCABULARY - PART 394: NUCLEAR INSTRUMENTATION - INSTRUMENTS
NF EN 60068 2-14 : 2009 ENVIRONMENTAL TESTING - PART 2-14: TESTS - TEST N: CHANGE OF TEMPERATURE
IEC 60068-2-2:2007 Environmental testing - Part 2-2: Tests - Test B: Dry heat
IEC 61000-4-2:2008 Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test
NF EN 60068 2-6 : 2008 ENVIRONMENTAL TESTING - PART 2-6: TESTS - TEST FC: VIBRATION (SINUSOIDAL)
IEC 61000-4-3:2006+AMD1:2007+AMD2:2010 CSV Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test
NF EN 60068 2-27 : 2009 ENVIRONMENTAL TESTING - PART 2-27: TESTS - TEST EA AND GUIDANCE: SHOCK
NF EN 60068-2-78 : 2013 ENVIRONMENTAL TESTING - PART 2-78: TESTS - TEST CAB: DAMP HEAT, STEADY STATE
NF EN 61000 4-6 : 2014 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-6: TESTING AND MEASUREMENT TECHNIQUES - IMMUNITY TO CONDUCTED DISTURBANCES, INDUCED BY RADIO-FREQUENCY FIELDS
IEC 60068-2-1:2007 Environmental testing - Part 2-1: Tests - Test A: Cold
NF EN 61000-4-3 : 2006 AMD 2 2011 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-3: TESTING AND MEASUREMENT TECHNIQUES - RADIATED, RADIO-FREQUENCY, ELECTROMAGNETIC FIELD IMMUNITY TEST
NFC 01 393 : 2004 ELECTROTECHNICAL VOCABULARY - PART 393: NUCLEAR INSTRUMENTATION - PHYSICAL PHENOMENA AND BASIC CONCEPTS
IEC 60068-2-14:2009 Environmental testing - Part 2-14: Tests - Test N: Change of temperature
NF EN 60721 3-5 : 1997 CLASSIFICATION OF ENVIRONMENTAL CONDITIONS - CLASSIFICATION OF GROUPS OF ENVIRONMENTAL PARAMETERS AND THEIR SEVERITIES - GROUND VEHICLE INSTALLATIONS
IEC 60050-393:2003 International Electrotechnical Vocabulary (IEV) - Part 393: Nuclear instrumentation - Physical phenomena and basic concepts

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.