• There are no items in your cart

NFC 33 009-2 : 2008

Current
Current

The latest, up-to-date edition.

ELECTRIC CABLES - ACCESSORIES - MATERIAL CHARACTERIZATION - PART 2: FINGERPRINTING AND TYPE TESTS FOR HEAT SHRINKABLE COMPONENTS FOR LOW VOLTAGE APPLICATIONS
Published date

01-12-2013

1 Domaine d'application
2 Références normatives
3 Termes et définitions
Tableau 1 - Essais d'identification: Méthodes d'essai
            et exigences
4 Essais d'identification
  4.1 Généralité
  4.2 Échantillonnage
  4.3 Préparation et conditionnement
  4.4 Essais
  4.5 Rapport d'essai
5 Essais de type
  5.1 Généralités
  5.2 Échantillonnage
  5.3 Préparation et conditionnement
  5.4 Essais
Tableau 2 - Essais de type: Méthodes d'essai et exigences
  5.5 Rapport d'essai
Figure 1 - Assemblage pour l'essai d'adhérence
Annexe A (informative) Santé et sécurité
Annexe B (normative) Dimensions après rétreint complet
Annexe C (normative) Exigences générales

Le présent Document d'Harmonisation spécifie les conditions et les exigences pour: les essais d'identification (tels que définis en 3.7), les essais de type (tels que définis en 3.8). Pour les composants thermorétractables destinés à être utilisés pour l'isolation électrique ou l'isolation électrique et la protection mécanique dans les accessoires de câbles pour basse tension, tels que définis dans l'EN 50393. Les essais d'identification et les essais de type des matériaux n'ont aucun lien obligatoire avec les essais de type des accessoires. Ils doivent être considérés comme des essais indépendants mais ils peuvent être réalisés conjointement avec les essais de type des accessoires.

DevelopmentNote
Indice de classement: C33-009-2. (06/2008)
DocumentType
Standard
PublisherName
Association Francaise de Normalisation
Status
Current

IEC 60243-1:2013 Electric strength of insulating materials - Test methods - Part 1: Tests at power frequencies
NF EN 1465 : 2009 ADHESIVES - DETERMINATION OF TENSILE LAP-SHEAR STRENGTH OF BONDED ASSEMBLIES
NF EN 60296 : 2014 FLUIDS FOR ELECTROTECHNICAL APPLICATIONS - UNUSED MINERAL INSULATING OILS FOR TRANSFORMERS AND SWITCHGEAR
NF EN ISO 868 : 2003 PLASTICS AND EBONITE - DETERMINATION OF INDENTATION HARDNESS BY MEANS OF A DUROMETER (SHORE HARDNESS)
IEC 60684-2:2011 Flexible insulating sleeving - Part 2: Methods of test
NF EN 60243-1 : 2013 ELECTRICAL STRENGTH OF INSULATING MATERIALS - TEST METHODS - PART 1: TESTS AT POWER FREQUENCIES
NF EN 50393 : 2015 TEST METHODS AND REQUIREMENTS FOR ACCESSORIES FOR USE ON DISTRIBUTION CABLES OF RATED VOLTAGE 0,6/1,0 (1,2) KV
ISO 8013:2012 Rubber, vulcanized Determination of creep in compression or shear
ISO 527-2:2012 Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics
ISO 11357-3:2011 Plastics Differential scanning calorimetry (DSC) Part 3: Determination of temperature and enthalpy of melting and crystallization
NFC 01 461 : 2008 INTERNATIONAL ELECTROTECHNICAL VOCABULARY - PART 461: ELECTRIC CABLES
ISO 1183:1987 Plastics Methods for determining the density and relative density of non-cellular plastics
IEC 60296:2012 RLV Fluids for electrotechnical applications - Unused mineral insulating oils for transformers and switchgear
ISO 4587:2003 Adhesives Determination of tensile lap-shear strength of rigid-to-rigid bonded assemblies
NF EN ISO-62 : 2008 PLASTICS - DETERMINATION OF WATER ABSORPTION
NF EN 60684-2 : 2012 FLEXIBLE INSULATING SLEEVING - PART 2: METHODS OF TEST
IEC 60093:1980 Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials
NF EN ISO 11358 : 1997 PLASTICS - THERMOGRAVIMETRY (TG) OF POLYMERS - GENERAL PRINCIPLES
ISO 11358:1997 Plastics Thermogravimetry (TG) of polymers General principles
ISO 62:2008 Plastics Determination of water absorption
IEC 60050-461:2008 International Electrotechnical Vocabulary (IEV) - Part 461: Electric cables
IEC 60811-2-1:1998+AMD1:2001 CSV Common test methods for insulating and sheathing materials of electric and optical cables - Part 2-1: Methods specific to elastomeric compounds - Ozone resistance, hot set and mineral oil immersion tests
NFC 26 215 : 1982 METHODS OF TESTING INSULATING MATERIALS - METHODS OF TEST FOR VOLUME RESISTIVITY AND SURFACE RESISTIVITY OF SOLID ELECTRICAL INSULATING MATERIALS
NF ISO 8013 : 2012 RUBBER, VULCANIZED - DETERMINATION OF CREEP IN COMPRESSION OR SHEAR
NF EN ISO 527-2 : 2012 PLASTICS - DETERMINATION OF TENSILE PROPERTIES - PART 2: TEST CONDITIONS FOR MOULDING AND EXTRUSION PLASTICS
ISO 868:2003 Plastics and ebonite — Determination of indentation hardness by means of a durometer (Shore hardness)
NF EN 60811-2-1 : 99 AMD 1 2002 INSULATING AND SHEETING MATERIALS OF ELECTRIC AND OPTICAL CABLES - COMMON TEST METHODS - PART 2-1: METHODS SPECIFIC TO ELASTOMERIC COMPOUNDS - OZONE RESISTANCE, HOT SET AND MINERAL OIL IMMERSION TESTS

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.