NFPA 54 : 2018
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
NATIONAL FUEL GAS CODE
Available format(s)
Hardcopy
Superseded date
08-13-2021
Language(s)
English
Published date
01-01-2018
Publisher
Chapter 1 - Administration
Chapter 2 - Referenced Publications
Chapter 3 - Definitions
Chapter 4 - General
Chapter 5 - Gas Piping System Design,
Materials, and Components
Chapter 6 - Pipe Sizing
Chapter 7 - Gas Piping Installation
Chapter 8 - Inspection, Testing, and Purging
Chapter 9 - Appliance, Equipment, and
Accessory Installation
Chapter 10 - Installation of Specific
Appliances
Chapter 11 - Procedures to Be Followed to Place
Appliance in Operation
Chapter 12 - Venting of Appliances
Chapter 13 - Sizing of Category I Venting
Systems
Annex A - Explanatory Material
Annex B - Sizing and Capacities of Gas Piping
Annex C - Suggested Method of Checking for
Leakage
Annex D - Suggested Emergency Procedure
for Gas Leaks
Annex E - Flow of Gas Through Fixed Orifices
Annex F - Sizing of Venting Systems Serving
Appliances Equipped with Draft
Hoods, Category I Appliances, and
Appliances Listed for Use with
Type B Vents
Annex G - Recommended Procedure for
Safety Inspection of an Existing
Appliance Installation
Annex H - Indoor Combustion Air Calculation
Examples
Annex I - Example of Combination of Indoor
and Outdoor Combustion and
Ventilation Opening Design
Annex J - Enforcement
Annex K - Informational References
Index
Gives industry-accepted guidance for the safe installation and operation of fuel gas piping systems, appliances, equipment, and accessories.
| DevelopmentNote |
Also included in NFPA 54 SET. (03/2007) 2009 version is also available in Spanish, see record NFPA 54 SPANISH. (01/2011) Also numbered as ANSI Z223.1. (09/2014)
|
| DocumentType |
Standard
|
| Pages |
179
|
| PublisherName |
National Fire Protection Association
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| NFPA 67 : 2016 | GUIDE ON EXPLOSION PROTECTION FOR GASEOUS MIXTURES IN PIPE SYSTEMS |
| NFPA 1914 : 2002 | TESTING FIRE DEPARTMENT AERIAL DEVICES |
| BS ISO 13577-3:2016 | Industrial furnaces and associated processing equipment. Safety Generation and use of protective and reactive atmosphere gases |
| ANSI Z21.1 : 2016 | HOUSEHOLD COOKING GAS APPLIANCES |
| ASTM E 2292 : 2014 : REDLINE | Standard Guide for Field Investigation of Carbon Monoxide Poisoning Incidents |
| CSA 6.32:2012 | PRESS-CONNECT METALLIC FITTINGS FOR USE IN FUEL GAS DISTRIBUTION SYSTEMS |
| ASTM C 1015 : 2017 : REDLINE | Standard Practice for Installation of Cellulosic and Mineral Fiber Loose-Fill Thermal Insulation |
| NFPA 513 : 1998 | MOTOR FREIGHT TERMINALS |
| CSA 6.23 : 2005 : R2015 | MANUALLY OPERATED PIEZO-ELECTRIC SPARK GAS IGNITION SYSTEMS AND COMPONENTS |
| ANSI LC 4:2012 | PRESS-CONNECT METALLIC FITTINGS FOR USE IN FUEL GAS DISTRIBUTION SYSTEMS |
| NFPA 1126 : 2016 | USE OF PYROTECHNICS BEFORE A PROXIMATE AUDIENCE |
| ANSI Z21.12 : 1990 : INC : ADD B : 1994 : R2015 | DRAFT HOODS |
| ANSI Z83.4-2017/CSA 3.7-2017 | Non-recirculating direct gas-fired heating and forced ventilation appliances for commercial and industrial application |
| CSA 4.6 : 2007 : INC : ADD A : 2010 : R2012 | AUTOMATIC GAS SHUTOFF DEVICES FOR HOT WATER SUPPLY SYSTEMS |
| ANSI Z21.19-2014/CSA 1.4-2014 | REFRIGERATORS USING GAS FUEL |
| ANSI Z21.87 : 2007 : R2012 | AUTOMATIC GAS SHUTOFF DEVICES FOR HOT WATER SUPPLY SYSTEMS |
| ANSI Z21.63 : 2014 | PORTABLE TYPE GAS CAMP HEATERS |
| ANSI Z21.86-2016/CSA 2.32-2016 | VENTED GAS-FIRED SPACE HEATING APPLIANCES |
| CSA C22.2 No. 60730-2-5 : 2014 | AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 2-5: PARTICULAR REQUIREMENTS FOR AUTOMATIC ELECTRICAL BURNER CONTROL SYSTEMS |
| ANSI Z21.75 : 2016 | CONNECTORS FOR OUTDOOR GAS APPLIANCES AND MANUFACTURED HOMES |
| ANSI Z83.25-2017 (R2021)/CSA 3.19-2017 | Direct gas-fired process air heaters |
| ANSI Z21.86-2016/CSA 2.32-2016 | Vented gas-fired space heating appliances |
| NFPA 85B : 1989 | PREVENTION OF FURNACE EXPLOSIONS IN NATURAL GAS FIRED MULTIPLE BURNER BOILER FURNACES |
| ANSI FC 1 : 2012 | STATIONARY FUEL CELL POWER SYSTEMS |
| NFPA 102 : 2016 | GRANDSTANDS, FOLDING AND TELESCOPIC SEATING, TENTS, AND MEMBRANE STRUCTURES |
| ASCE 25 06 : 2008 | EARTHQUAKE ACTUATED AUTOMATIC GAS SHUTOFF DEVICES |
| NFPA 61B : 1989 | PREVENTION OF FIRES AND EXPLOSIONS IN GRAIN ELEVATORS AND FACILITIES HANDLING BULK RAW AGRICULTURAL COMMODITIES |
| ANSI Z21.18 : 2007 : INC : ADD B : 2012 : R2017 | GAS APPLIANCE PRESSURE REGULATORS |
| ASTM C 1158 : 2005 | Standard Practice for Installation and Use of Radiant Barrier Systems (RBS) in Building Construction |
| ASTM C 1320 : 2010 : R2016 | Standard Practice for Installation of Mineral Fiber Batt and Blanket Thermal Insulation for Light Frame Construction |
| ASTM F 1217 : 2017 : REDLINE | Standard Specification for Cooker, Steam |
| ASTM F 2796 : 2009 : R2014 | Standard Specification for Hot Food Holding Tables |
| NFPA 820 : 2016 | FIRE PROTECTION IN WASTEWATER TREATMENT AND COLLECTION FACILITIES |
| NFPA 804 : 2015 | FIRE PROTECTION FOR ADVANCED LIGHT WATER REACTOR ELECTRIC GENERATING PLANTS |
| NFPA 909 : 2017 | PROTECTION OF CULTURAL RESOURCE PROPERTIES - MUSEUMS, LIBRARIES, AND PLACES OF WORSHIP |
| NFPA 150 : 2016 | FIRE AND LIFE SAFETY IN ANIMAL HOUSING FACILITIES |
| NFPA 37 : 2018 | INSTALLATION AND USE OF STATIONARY COMBUSTION ENGINES AND GAS TURBINES |
| NFPA 914 : 2015 | FIRE PROTECTION OF HISTORIC STRUCTURES |
| NFPA 30A : 2018 | MOTOR FUEL DISPENSING FACILITIES AND REPAIR GARAGES |
| NFPA 51 : 2018 | DESIGN AND INSTALLATION OF OXYGEN-FUEL GAS SYSTEMS FOR WELDING, CUTTING, AND ALLIED PROCESSES |
| NFPA 82 : 2014 | INCINERATORS AND WASTE AND LINEN HANDLING SYSTEMS AND EQUIPMENT |
| NFPA 99 : 2018 | HEALTH CARE FACILITIES CODE |
| NFPA 303 : 2016 | FIRE PROTECTION STANDARD FOR MARINAS AND BOATYARDS |
| NFPA 96 : 2017 | VENTILATION CONTROL AND FIRE PROTECTION OF COMMERCIAL COOKING OPERATIONS |
| NFPA 211 : 2016 | CHIMNEYS, FIREPLACES, VENTS, AND SOLID FUEL-BURNING APPLIANCES |
| NFPA 90B : 2018 | INSTALLATION OF WARM AIR HEATING AND AIR-CONDITIONING SYSTEMS |
| NFPA 1192 : 2018 | RECREATIONAL VEHICLES |
| NFPA 31 : 2016 | INSTALLATION OF OIL-BURNING EQUIPMENT |
| NFPA 307 : 2016 | CONSTRUCTION AND FIRE PROTECTION OF MARINE TERMINALS, PIERS, AND WHARVES |
| NFPA 851 : 2010 | FIRE PROTECTION FOR HYDROELECTRIC GENERATING PLANTS |
| NFPA 415 : 2016 | AIRPORT TERMINAL BUILDINGS, FUELING RAMP DRAINAGE, AND LOADING WALKWAYS |
| NFPA 87 : 2018 | FLUID HEATERS |
| NFPA 400 : 2016 | HAZARDOUS MATERIALS CODE |
| NFPA 76 : 2016 | FIRE PROTECTION OF TELECOMMUNICATIONS FACILITIES |
| NFPA 850 : 2015 | FIRE PROTECTION FOR ELECTRIC GENERATING PLANTS AND HIGH VOLTAGE DIRECT CURRENT CONVERTER STATIONS |
| NFPA 1221 : 2016 | INSTALLATION, MAINTENANCE, AND USE OF EMERGENCY SERVICES COMMUNICATIONS SYSTEMS |
| NFPA 501A : 2017 | FIRE SAFETY CRITERIA FOR MANUFACTURED HOME INSTALLATIONS, SITES, AND COMMUNITIES |
| NFPA 59 : 2018 | UTILITY LP-GAS PLANT CODE |
| NFPA 5000 : 2018 | BUILDING CONSTRUCTION AND SAFETY CODE |
| CSA 6.25 : 2005 : INC : ADD A : 2007 : R2010 | CYLINDER CONNECTION DEVICES |
| ANSI Z21.66 : 2015 | AUTOMATIC DAMPER DEVICES FOR USE WITH GAS-FIRED APPLIANCES |
| CSA 2.33 : 2017 | VENTED GAS FIREPLACE HEATERS |
| UFC 4-510-01 : Change 2 | UNIFIED FACILITIES CRITERIA - DESIGN: MILITARY MEDICAL FACILITIES |
| ANSI/CSA AMERICA FC 3-2004 (R2017) | PORTABLE FUEL CELL POWER SYSTEMS |
| NFPA 58:2024 | Liqueed Petroleum Gas Code |
| CSA FC 3 : 2004 | PORTABLE FUEL CELL POWER SYSTEMS |
| ASHRAE 90.2 : 2007 | ENERGY-EFFICIENT DESIGN OF LOW-RISE RESIDENTIAL BUILDINGS |
| ASHRAE 62.1 : 2016 | VENTILATION FOR ACCEPTABLE INDOOR AIR QUALITY |
| ASHRAE 62.2 : 2016 | VENTILATION AND ACCEPTABLE INDOOR AIR QUALITY IN RESIDENTIAL BUILDINGS |
| NFPA 86C : 1999 | INDUSTRIAL FURNACES USING A SPECIAL PROCESSING ATMOSPHERE |
| NASA SSTD 8070 0044 : 2012 | STANDARD FOR CARBON STEEL PIPING SYSTEMS |
| ASTM C 1744 : 2012 : REDLINE | Standard Practice for Installation and Use of Radiant Barrier Systems (RBS) in Commercial/Industrial Building Construction |
| NFPA 30B : 2015 | CODE FOR THE MANUFACTURE AND STORAGE OF AEROSOL PRODUCTS |
| NFPA 85A : 1987 | PREVENTION OF FURNACE EXPLOSIONS IN FUEL OIL AND NATURAL GAS FIRED SINGLE BURNER BOILER FURNACES |
| ANSI Z21.77 : 2005 : R2015 | MANUALLY OPERATED PIEZO-ELECTRIC SPARK GAS IGNITION SYSTEMS AND COMPONENTS |
| ASTM C 1320 : 2010 | Standard Practice for Installation of Mineral Fiber Batt and Blanket Thermal Insulation for Light Frame Construction |
| CSA 8.5 : 2012 | GAS HOSE CONNECTORS FOR PORTABLE AND MOVEABLE GAS APPLIANCES |
| 04/30110212 DC : DRAFT MAR 2004 | ISO 12648 - GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR PRINTING PRESS SYSTEMS |
| CSA 6.32 : 2012 : INC : ADD A : 2012 : R2016 | PRESS-CONNECT METALLIC FITTINGS FOR USE IN FUEL GAS DISTRIBUTION SYSTEMS |
| CSA 6.23 : 2005 | MANUALLY OPERATED PIEZO-ELECTRIC SPARK GAS IGNITION SYSTEMS AND COMPONENTS |
| ANSI Z83.25 : 2017 | DIRECT GAS-FIRED PROCESS AIR HEATERS |
| ANSI Z83.20 : 2016 | GAS-FIRED TUBULAR AND LOW-INTENSITY INFRARED HEATERS |
| ANSI Z21-101 : 2012 | GAS HOSE CONNECTORS FOR PORTABLE AND MOVEABLE GAS APPLIANCES |
| CSA 8.5 : 2012 : R2017 | GAS HOSE CONNECTORS FOR PORTABLE AND MOVEABLE GAS APPLIANCES |
| ANSI Z21.71 : 1993 : INC : ADD A : 2005 : R2016 | AUTOMATIC INTERMITTENT PILOT IGNITION SYSTEMS FOR FIELD INSTALLATION |
| CSA 2.3 : 2016 | GAS-FIRED CENTRAL FURNACES |
| CSA 1.8 : 2016 | GAS FOOD SERVICE EQUIPMENT |
| ANSI Z21.80 : 2011 : INC : ADD A : 2012 : R2016 | LINE PRESSURE REGULATORS |
| CSA 6.10 : 2015 | CONNECTORS FOR GAS APPLIANCES |
| ANSI Z21.12 : 1990 : INC : ADD B : 2012 : R2000 | DRAFT HOODS |
| CSA 4.9 : 2017 | GAS-FIRED LOW PRESSURE STEAM AND HOT WATER BOILERS |
| ANSI Z21.5.2-2016/CSA 7.2:2016 | GAS CLOTHES DRYERS, VOLUME 2, TYPE 2 CLOTHES DRYERS |
| ANSI Z21.10.3-2017/CSA 4.3:2017 | GAS-FIRED WATER HEATERS, VOLUME 3, STORAGE WATER HEATERS WITH INPUT RATINGS ABOVE 75,000 BTU PER HOUR, CIRCULATING AND INSTANTANEOUS |
| CSA 1.1 : 2016 | HOUSEHOLD COOKING GAS APPLIANCES |
| CSA 4.6 : 2007 : INC : ADD A : 2010 : R2016 | AUTOMATIC GAS SHUTOFF DEVICES FOR HOT WATER SUPPLY SYSTEMS |
| ANSI LC 4 : 2012 : INC : ADD A : 2013 : R2017 | PRESS-CONNECT METALLIC FITTINGS FOR USE IN FUEL GAS DISTRIBUTION SYSTEMS |
| CSA 6.16 : 2015 | CONNECTORS FOR MOVEABLE GAS APPLIANCES |
| CSA 4.1 : 2017 | GAS WATER HEATERS, VOLUME 1, STORAGE WATER HEATERS WITH INPUT RATINGS OF 75,000 BTU PER HOUR OR LESS |
| NFPA 232A : 1995 | ARCHIVES AND RECORDS CENTERS |
| CGA 6.14 : 2015 | AUTOMATIC DAMPER DEVICES FOR USE WITH GAS-FIRED APPLIANCES |
| ANSI Z21.5.1-2017/CSA 7.1-2017 | Gas clothes dryers, volume I, type 1 clothes dryers |
| ANSI Z21.80 : 2011 : INC : ADD A : 2012 | LINE PRESSURE REGULATORS |
| ANSI Z21.20 : 2005 : INC : ADD A : 2008 : R2012 | AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 2-5: PARTICULAR REQUIREMENTS FOR AUTOMATIC ELECTRICAL BURNER CONTROL SYSTEMS |
| ANSI Z21.20 :2005 | AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 2-5: PARTICULAR REQUIREMENTS FOR AUTOMATIC ELECTRICAL BURNER CONTROL SYSTEMS |
| ISO 13577-3:2016 | Industrial furnaces and associated processing equipment Safety Part 3: Generation and use of protective and reactive atmosphere gases |
| ANSI Z21.92 : 2001 : INC : ADD A : 2005 : R2012 | MANUALLY OPERATED ELECTRIC GAS IGNITION SYSTEMS AND COMPONENTS |
| ANSI Z21.13 : 2017 | GAS-FIRED LOW PRESSURE STEAM AND HOT WATER BOILERS |
| ANSI Z21.15 : 2009 : INC : ADD A : 2009 | MANUALLY OPERATED GAS VALVES FOR APPLIANCES, APPLIANCE CONNECTOR VALVES AND HOSE END VALVES |
| ANSI Z21.87 : 2007 : INC : ADD A : 2010 : R2012 | AUTOMATIC GAS SHUTOFF DEVICES FOR HOT WATER SUPPLY SYSTEMS |
| ANSI Z21.92 : 2001 : R2012 | MANUALLY OPERATED ELECTRIC GAS IGNITION SYSTEMS AND COMPONENTS |
| ANSI Z21.81 : 2005 : INC : ADD A : 2007 : R2010 | CYLINDER CONNECTION DEVICES |
| ANSI Z21.5.1-2017/CSA 7.1-2017 | GAS CLOTHES DRYERS, VOLUME 1, TYPE 1 CLOTHES DRYERS |
| NFPA 224 : 1985 | HOMES AND CAMPS IN FOREST AREAS |
| NFPA 416 : 1993 | CONSTRUCTION AND PROTECTION OF AIRPORT TERMINAL BUILDINGS |
| ANSI Z21.97-2017/CSA 2.41-2017 | Outdoor decorative gas appliances |
| NFPA 664 : 2017 | PREVENTION OF FIRES AND EXPLOSIONS IN WOOD PROCESSING AND WOODWORKING FACILITIES |
| ANSI Z21.11.3-2016 | Gas-fired room heaters, volume III, propane-fired portable emergency use heater systems |
| ISO 12648:2006 | Graphic technology Safety requirements for printing press systems |
| CSA 2.22 : 2016 | VENTED DECORATIVE GAS APPLIANCES |
| ANSI Z21.18 : 2007 : INC : ADD B : 2012 | GAS APPLIANCE PRESSURE REGULATORS |
| API 500 RUSSIAN : 1997 : R2002 | RECOMMENDED PRACTICE FOR CLASSIFICATION OF LOCATIONS FOR ELECTRICAL INSTALLATIONS AT PETROLEUM FACILITIES CLASSIFIED AS CLASS 1, DIVISION 1 AND DIVISION 2 |
| API 500 RUSSIAN :1997 | RECOMMENDED PRACTICE FOR CLASSIFICATION OF LOCATIONS FOR ELECTRICAL INSTALLATIONS AT PETROLEUM FACILITIES CLASSIFIED AS CLASS 1, DIVISION 1 AND DIVISION 2 |
| NFPA 59A : 2016 | PRODUCTION, STORAGE, AND HANDLING OF LIQUEFIED NATURAL GAS (LNG) |
| NFPA 2 : 2016 | HYDROGEN TECHNOLOGIES CODE |
| ANSI Z21.10.3 : 2015 | GAS-FIRED WATER HEATERS, VOLUME 3, STORAGE WATER HEATERS WITH INPUT RATINGS ABOVE 75,000 BTU PER HOUR, CIRCULATING AND INSTANTANEOUS |
| NFPA 52 : 2016 | VEHICULAR NATURAL GAS FUEL SYSTEMS CODE |
| NFPA 90A : 2018 | INSTALLATION OF AIR-CONDITIONING AND VENTILATING SYSTEMS |
| NFPA 232 : 2017 | PROTECTION OF RECORDS |
| NFPA 58 : 2017 | LIQUEFIED PETROLEUM GAS CODE |
| NFPA 801 : 2014 | FIRE PROTECTION FOR FACILITIES HANDLING RADIOACTIVE MATERIALS |
| 13/30231511 DC : 0 | BS ISO 13577-2 - INDUSTRIAL FURNACES AND ASSOCIATED PROCESSING EQUIPMENT - SAFETY - PART 2: COMBUSTION AND FUEL HANDLING SYSTEMS |
| CSA 6.29 : 2001 : INC : ADD B : 2010 : R2016 | MANUALLY OPERATED ELECTRIC GAS IGNITION SYSTEMS AND COMPONENTS |
| ANSI Z21.10.1 : 2017 | GAS WATER HEATERS, VOLUME 1, STORAGE WATER HEATERS WITH INPUT RATINGS OF 75,000 BTU PER HOUR OR LESS |
| CSA 2.6 : 2016 | GAS UNIT HEATERS, GAS PACKAGED HEATERS, GAS UTILITY HEATERS, AND GAS-FIRED DUCT FURNACES |
| NASA-STD-8719.11B:2020 | STANDARD FOR FIRE PROTECTION AND LIFE SAFETY |
| ANSI/CSA NGV 5.1-2016 (R2020) | Residential fueling appliances |
| NFPA 99C : 2005 | GAS AND VACUUM SYSTEMS |
| ANSI Z83.11 : 2016 | GAS FOOD SERVICE EQUIPMENT |
| NFPA 1 : 2021 | FIRE CODE |
| CSA NGV 5.1 : 2016 | RESIDENTIAL FUELING APPLIANCES |
| CSA 6.27 : 2016 | CONNECTORS FOR OUTDOOR GAS APPLIANCES AND MANUFACTURED HOMES |
| UFC 3-410-01 : Change 4 | UNIFIED FACILITIES CRITERIA - HEATING, VENTILATING, AND AIR CONDITIONING SYSTEMS |
| ASME CSD1 : 2012 | CONTROLS AND SAFETY DEVICES FOR AUTOMATICALLY FIRED BOILERS |
| UFC 3-460-01 : Change 3 | UNIFIED FACILITIES CRITERIA - DESIGN: PETROLEUM FUEL FACILITIES |
| UFC 3-600-01 : Change 2 | UNIFIED FACILITIES CRITERIA - FIRE PROTECTION ENGINEERING FOR FACILITIES |
| ASME B31.8 : 2016 | Gas Transmission and Distribution Piping Systems |
| ASME B31.3:2016 | PROCESS PIPING |
| CSA 6.24 : 2015 | GAS CONVENIENCE OUTLETS AND OPTIONAL ENCLOSURES |
| NFPA 1141 : 2017 | FIRE PROTECTION INFRASTRUCTURE FOR LAND DEVELOPMENT IN WILDLAND, RURAL, AND SUBURBAN AREAS |
| CSA 6.9 : 2014 | QUICK DISCONNECT DEVICES FOR USE WITH GAS FUEL APPLIANCES |
| NFPA 88B : 1997 | REPAIR GARAGES |
| ANSI Z21.18 : 2007 : R2012 | GAS APPLIANCE PRESSURE REGULATORS |
| BS ISO 12648:2006 | Graphic technology. Safety requirements for printing press systems |
| ANSI/ASSE A10.27 : 1998 | SAFETY REQUIREMENTS FOR HOT MIX ASPHALT FACILITIES |
| CSA 6.3 : 2007 | GAS APPLIANCES PRESSURE REGULATORS |
| ANSI/CSA FC 1:2014 | FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY |
| UFC 1-200-01 : 20071127 | UNIFIED FACILITIES CRITERIA (UFC) DOD BUILDING CODE(GENERAL BUILDING REQUIREMENTS) |
| CSA 6.8 : 2005 : INC : ADD A : 2010 : R2015 | PILOT GAS FILTERS |
| ANSI Z21-101 : 2012 : R2017 | GAS HOSE CONNECTORS FOR PORTABLE AND MOVEABLE GAS APPLIANCES |
| ANSI Z21.54 : 2014 | GAS HOSE CONNECTORS FOR PORTABLE OUTDOOR GAS-FIRED APPLIANCES |
| ANSI Z21.12 : 1990 : R2000 | DRAFT HOODS |
| ANSI Z21.87 :2007 | AUTOMATIC GAS SHUTOFF DEVICES FOR HOT WATER SUPPLY SYSTEMS |
| CSA C22.2 No. 199 : 2007 : INC : ADD A : 2010 : R2012 | AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 2: PARTICULAR REQUIREMENTS FOR AUTOMATIC BURNER IGNITION SYSTEMS AND COMPONENTS |
| ANSI Z21.60-2017/CSA 2.26-2017 | Decorative gas appliances for installation in solid-fuel burning fireplaces |
| NFPA 56 (PS) : 2012 | FIRE AND EXPLOSION PREVENTION DURING CLEANING AND PURGING OF FLAMMABLE GAS PIPING SYSTEMS |
| ANSI Z21.50 : 2016 | VENTED DECORATIVE GAS APPLIANCES |
| ANSI Z21.20-2005 (R2016) | Automatic Gas Ignition Systems and Components |
| ANSI Z21.72 : 2016 | PORTABLE TYPE GAS CAMP STOVES |
| ANSI Z21.92 : 2001 : INC : ADD B : 2010 | MANUALLY OPERATED ELECTRIC GAS IGNITION SYSTEMS AND COMPONENTS |
| ANSI Z21.78 : 2010 : R2015 | COMBINATION GAS CONTROLS FOR GAS APPLIANCES |
| ANSI Z21.15 : 2009 : INC : ADD B : 2013 : R2014 | MANUALLY OPERATED GAS VALVES FOR APPLIANCES, APPLIANCE CONNECTOR VALVES AND HOSE END VALVES |
| ANSI Z21.88 : 2017 | VENTED GAS FIREPLACE HEATERS |
| ANSI Z83.20-2016/CSA 2.34-2016 | Gas-fired tubular and low-intensity infrared heaters |
| CSA 6.31 : 2006 | AUTOMATIC FLAMMABLE VAPOR SENSOR SYSTEMS AND COMPONENTS |
| CSA 6.31 : 2006 : INC : ADD A : 2007 : R2011 | AUTOMATIC FLAMMABLE VAPOR SENSOR SYSTEMS AND COMPONENTS |
| NFPA 61 : 2017 | PREVENTION OF FIRES AND DUST EXPLOSIONS IN AGRICULTURAL AND FOOD PROCESSING FACILITIES |
| ANSI Z21.89-2017/CSA 1.18-2017 | Outdoor cooking specialty gas appliances |
| NFPA 160 : 2016 | USE OF FLAME EFFECTS BEFORE AN AUDIENCE |
| NFPA 232AM : 1991 | FIRE PROTECTION FOR ARCHIVES AND RECORDS CENTERS |
| NFPA 19911 : 1991 | FIRE PROTECTION OF MUSEUMS AND MUSEUM COLLECTIONS |
| NFPA 802 : 1993 | NUCLEAR RESEARCH AND PRODUCTION REACTORS |
| ANSI Z21.97 : 2017 | OUTDOOR DECORATIVE GAS APPLIANCES |
| NFPA 8501 : 1997 | SINGLE BURNER BOILER OPERATION |
| NFPA 913 : 1992 | HISTORIC SITES AND STRUCTURES |
| ASTM F 2521 : 2009 : R2014 | Standard Specification for Heavy-Duty Ranges, Gas and Electric |
| ANSI Z21-10-3 : 2017 | GAS-FIRED WATER HEATERS, VOLUME 3, STORAGE WATER HEATERS WITH INPUT RATINGS ABOVE 75,000 BTU PER HOUR, CIRCULATING AND INSTANTANEOUS |
| CSA 6.22 : 2011 : ADD 1 : INC : ADD A : 2012 | LINE PRESSURE REGULATORS |
| CSA 6.22 : 2011 : INC : ADD A : 2012 : R2016 | LINE PRESSURE REGULATORS |
| NFPA 921 : 2017 | GUIDE FOR FIRE AND EXPLOSION INVESTIGATIONS |
| ANSI Z21.18 : 2007 : INC : ADD A : 2010 | GAS APPLIANCE PRESSURE REGULATORS |
| ANSI Z21.18 : 2007 | GAS APPLIANCE PRESSURE REGULATORS |
| ASTM C 1321 : 2015 : REDLINE | Standard Practice for Installation and Use of Interior Radiation Control Coating Systems (IRCCS) in Building Construction |
| ASTM C 727 : 2012 : REDLINE | Standard Practice for Installation and Use of Reflective Insulation in Building Constructions |
| ASTM F 2796 : 2009 | Standard Specification for Hot Food Holding Tables |
| API 14F : 2008 : R2013 | DESIGN, INSTALLATION, AND MAINTENANCE OF ELECTRICAL SYSTEMS FOR FIXED AND FLOATING OFFSHORE PETROLEUM FACILITIES FOR UNCLASSIFIED AND CLASS 1, DIVISION 1 AND DIVISION 2 LOCATIONS |
| API 540 : 1999 : R2006 | ELECTRICAL INSTALLATIONS IN PETROLEUM PROCESSING PLANTS |
| NFPA 101 : 2018 | LIFE SAFETY CODE |
| ISO 12643-1:2009 | Graphic technology — Safety requirements for graphic technology equipment and systems — Part 1: General requirements |
| ANSI Z21.91 : 2017 | VENTLESS FIREBOX ENCLOSURES FOR GAS-FIRED UNVENTED DECORATIVE ROOM HEATERS |
| CSA 6.25 : 2005 | CYLINDER CONNECTION DEVICES |
| NFPA 61 : 2020 | PREVENTION OF FIRES AND DUST EXPLOSIONS IN AGRICULTURAL AND FOOD PROCESSING FACILITIES |
| CSA 6.20 : 2010 : R2015 | COMBINATION GAS CONTROLS FOR GAS APPLIANCES |
| CSA 11.2 : 2016 | PORTABLE TYPE GAS CAMP STOVES |
| ASHRAE GUIDELINE 24 : 2015 | VENTILATION AND INDOOR AIR QUALITY IN LOW-RISE RESIDENTIAL BUILDINGS |
| CSA 6.20 : 2010 | COMBINATION GAS CONTROLS FOR GAS APPLIANCES |
| ANSI Z21.23:2010 | GAS APPLIANCE THERMOSTATS |
| CSA/ANSI Z21.10.1:19/CSA 4.1:19 | Gas water heaters, volume I, storage water heaters with input ratings of 75,000 Btu per hour or less |
| CSA 9.1 : 2009 : INC : ADD B : 2013 : R2014 | MANUALLY OPERATED GAS VALVES FOR APPLIANCES, APPLIANCE CONNECTOR VALVES AND HOSE END VALVES |
| CSA 6.29 : 2001 : INC : ADD B : 2010 | MANUALLY OPERATED ELECTRIC GAS IGNITION SYSTEMS AND COMPONENTS |
| CSA 6.29 : 2001 | MANUALLY OPERATED ELECTRIC GAS IGNITION SYSTEMS AND COMPONENTS |
| CSA 9.1 : 2009 : INC : ADD A : 2012 | MANUALLY OPERATED GAS VALVES FOR APPLIANCES, APPLIANCE CONNECTOR VALVES AND HOSE END VALVES |
| ANSI Z83.8 : 2016 | GAS UNIT HEATERS, GAS PACKAGED HEATERS, GAS UTILITY HEATERS, AND GAS-FIRED DUCT FURNACES |
| CSA 9.1 : 2009 : INC : ADD B : 2013 | MANUALLY OPERATED GAS VALVES FOR APPLIANCES, APPLIANCE CONNECTOR VALVES AND HOSE END VALVES |
| CSA 6.29 : 2001 : INC : ADD B : 2010 : R2012 | MANUALLY OPERATED ELECTRIC GAS IGNITION SYSTEMS AND COMPONENTS |
| CSA 2.37 : 2014 | GAS-FIRED OUTDOOR INFRARED PATIO HEATERS |
| CSA/ANSI Z21.72:19/CSA 11.2:19 | Portable type gas camp stoves |
| ANSI Z21.89 : 2017 | OUTDOOR COOKING SPECIALTY GAS APPLIANCES |
| ANSI Z21.23 : 2010 : R2015 | GAS APPLIANCE THERMOSTATS |
| NASA SSTD 8070 0047 : 2016 | STANDARD FOR STAINLESS STEEL PIPING SYSTEMS AA, ACK1, ACK4, ACK6, B, BCK1, BCK3, BCK4, BCK6, BCK10, C, EE, G, H, JJ, K3, L1, L2, NCK1, NCK2, NCK3, NCK10, NCK11, P, R, T, AND Z |
| CSA 9.1 : 2009 | MANUALLY OPERATED GAS VALVES FOR APPLIANCES, APPLIANCE CONNECTOR VALVES AND HOSE END VALVES |
| ASHRAE HDBK REFRIGERATION : 2014 | ASHRAE HANDBOOK - REFRIGERATION |
| NASA STD 8719.11 : 2008 | SAFETY STANDARD FOR FIRE PROTECTION |
| NFPA 86D : 1999 | INDUSTRIAL FURNACES USING VACUUM AS AN ATMOSPHERE |
| NFPA 85C : 1991 | PREVENTION OF FURNACE EXPLOSIONS & IMPLOSIONS IN MULTIPLE BURNER BOILER FURNACES |
| API PUBL 2510A : 1996 | FIRE-PROTECTION CONSIDERATIONS FOR THE DESIGN AND OPERATION OF LIQUEFIED PETROLEUM GAS (LPG) STORAGE FACILITIES |
| NASA SSTD 8070 0092 : 2013 | DESIGN, INSTALLATION AND MAINTENANCE OF SITEWIDE NATURAL GAS DISTRIBUTION SYSTEM |
| ANSI Z21.69 : 2015 | CONNECTORS FOR MOVEABLE GAS APPLIANCES |
| ANSI/ASSE A10.10 : 2014 | SAFETY REQUIREMENTS FOR TEMPORARY AND PORTABLE SPACE HEATING DEVICES |
| ANSI Z21.18 : 2007 : INC : ADD A : 2010 : R2012 | GAS APPLIANCE PRESSURE REGULATORS |
| CSA/ANSI Z21.42:13 (R2018) | Gas-fired illuminating appliances |
| ASTM F 2786 : 2016 : REDLINE | Standard Practice for Field Leak Testing of Polyethylene (PE) Pressure Piping Systems Using Gaseous Testing Media Under Pressure (Pneumatic Leak Testing) |
| 08/30190505 DC : 0 | BS ISO 12643-1 - GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR GRAPHIC TECHNOLOGY EQUIPMENT AND SYSTEMS - PART 1: GENERAL REQUIREMENTS |
| BS ISO 12643-1:2009 | Graphic technology. Safety requirements for graphic technology equipment and systems General requirements |
| NFPA 409 : 2016 | AIRCRAFT HANGARS |
| NFPA 56 : 2017 | FIRE AND EXPLOSION PREVENTION DURING CLEANING AND PURGING OF FLAMMABLE GAS PIPING SYSTEMS |
| CSA LC 3 : 2000(R2005) | APPLIANCE STANDS AND DRAIN PANS |
| NFPA 85 : 2015 | BOILER AND COMBUSTION SYSTEMS HAZARDS CODE |
| CSA 8.4 : 2014 | GAS HOSE CONNECTORS FOR PORTABLE OUTDOOR GAS-FIRED APPLIANCES |
| ANSI Z21.21 : 2015 | AUTOMATIC VALVES FOR GAS APPLIANCES |
| ANSI Z21.77 : 2005 | MANUALLY OPERATED PIEZO-ELECTRIC SPARK GAS IGNITION SYSTEMS AND COMPONENTS |
| ANSI Z83.26 : 2014 | GAS-FIRED OUTDOOR INFRARED PATIO HEATERS |
| ANSI Z83.18 : 2017 | RECIRCULATING DIRECT GAS-FIRED HEATING AND FORCED VENTILATION APPLIANCES FOR COMMERCIAL AND INDUSTRIAL APPLICATIONS |
| ANSI Z83.4-2017/CSA 3.7-2017 | NON-RECIRCULATING DIRECT GAS-FIRED HEATING AND FORCED VENTILATION APPLIANCES FOR COMMERCIAL AND INDUSTRIAL APPLICATION |
| ANSI Z21.47 : 2016 | GAS-FIRED CENTRAL FURNACES |
| ANSI Z21.94 : 2006 : INC : ADD A : 2007 : R2016 | AUTOMATIC FLAMMABLE VAPOR SENSOR SYSTEMS AND COMPONENTS |
| ANSI Z21.81 : 2005 | CYLINDER CONNECTION DEVICES |
| ANSI Z21.15 : 2009 : INC : ADD B : 2013 | MANUALLY OPERATED GAS VALVES FOR APPLIANCES, APPLIANCE CONNECTOR VALVES AND HOSE END VALVES |
| ANSI LC 4 : 2012 : INC : ADD A : 2013 | PRESS-CONNECT METALLIC FITTINGS FOR USE IN FUEL GAS DISTRIBUTION SYSTEMS |
| ANSI Z21.19 : 2014 | REFRIGERATORS USING GAS FUEL |
| ANSI Z21.60-2017/CSA 2.26-2017 | DECORATIVE GAS APPLIANCES FOR INSTALLATION IN SOLID-FUEL BURNING FIREPLACES |
| ANSI Z21.92 : 2001 : INC : ADD B : 2010 : R2016 | MANUALLY OPERATED ELECTRIC GAS IGNITION SYSTEMS AND COMPONENTS |
| ANSI Z21.84-2017 | Manually lighted, natural gas, decorative gas appliances for installation in solid-fuel burning appliances |
| ANSI Z21.41 : 2014 | QUICK DISCONNECT DEVICES FOR USE WITH GAS FUEL APPLIANCES |
| ANSI Z21.81 : 2005 : INC : ADD A : 2007 : R2015 | CYLINDER CONNECTION DEVICES |
| ANSI Z21.15:2009 | MANUALLY OPERATED GAS VALVES FOR APPLIANCES, APPLIANCE CONNECTOR VALVES AND HOSE END VALVES |
| ANSI Z21.78 : 2010 | COMBINATION GAS CONTROLS FOR GAS APPLIANCES |
| ANSI Z21.94 : 2006 | AUTOMATIC FLAMMABLE VAPOR SENSOR SYSTEMS AND COMPONENTS |
| ANSI Z21.20 : 2005 : INC : ADD A : 2008 | AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 2-5: PARTICULAR REQUIREMENTS FOR AUTOMATIC ELECTRICAL BURNER CONTROL SYSTEMS |
| CSA C22.2 No. 199 : 2007 : INC : ADD A : 2010 | AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 2: PARTICULAR REQUIREMENTS FOR AUTOMATIC BURNER IGNITION SYSTEMS AND COMPONENTS |
| CSA 6.3 : 2007 : INC : ADD A : 2010 | GAS APPLIANCES PRESSURE REGULATORS |
| ANSI Z21.92 : 2001 : INC : ADD B : 2010 : R2012 | MANUALLY OPERATED ELECTRIC GAS IGNITION SYSTEMS AND COMPONENTS |
| ANSI Z21.87 : 2007 : INC : ADD A : 2010 : R2017 | AUTOMATIC GAS SHUTOFF DEVICES FOR HOT WATER SUPPLY SYSTEMS |
| CSA C22.2 No. 199 : 2007 : R2011 | AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 2: PARTICULAR REQUIREMENTS FOR AUTOMATIC BURNER IGNITION SYSTEMS AND COMPONENTS |
| CSA 6.31 : 2006 : INC : ADD A : 2007 : R2016 | AUTOMATIC FLAMMABLE VAPOR SENSOR SYSTEMS AND COMPONENTS |
| ANSI Z21.5.2 : 2016 | GAS CLOTHES DRYERS, VOLUME 2, TYPE 2 CLOTHES DRYERS |
| CSA/ANSI NGV 5.2-2017 | Vehicle fueling appliances (VFA) |
| ANSI Z83.19-2017/CSA 2.35-2017 | GAS-FIRED HIGH-INTENSITY INFRARED HEATERS |
| ANSI Z21.73-2017/CSA 11.1-2017 | PORTABLE TYPE GAS CAMP LIGHTS |
| ASTM F 1047 : 2017 : REDLINE | Standard Specification for Frying and Braising Pans, Tilting Type |
| ANSI Z21.90 : 2015 | GAS CONVENIENCE OUTLETS AND OPTIONAL ENCLOSURES |
| ANSI/ASSE A10.27 : 1998 : R2011 | SAFETY REQUIREMENTS FOR HOT MIX ASPHALT FACILITIES |
| NFPA 97 : 2003 | GLOSSARY OF TERMS RELATING TO CHIMNEYS, VENTS, AND HEAT-PRODUCING APPLIANCES |
| ANSI/ASSE A10.10 : 2014 | SAFETY REQUIREMENTS FOR TEMPORARY AND PORTABLE SPACE HEATING DEVICES |
| API 505 : 1997 | RECOMMENDED PRACTICE FOR CLASSIFICATION OF LOCATIONS FOR ELECTRICAL INSTALLATIONS AT PETROLEUM FACILITIES CLASSIFIED AS CLASS I, ZONE 0, ZONE 1, AND ZONE 2 |
| CSA 6.22 : 2011 | LINE PRESSURE REGULATORS |
| NFPA 1452 : 2015 | TRAINING FIRE SERVICE PERSONNEL TO CONDUCT COMMUNITY RISK REDUCTION |
| CSA 6.26 : 2018 | FUEL GAS PIPING SYSTEMS USING CORRUGATED STAINLESS STEEL TUBING |
| API 14F:2008 | DESIGN, INSTALLATION, AND MAINTENANCE OF ELECTRICAL SYSTEMS FOR FIXED AND FLOATING OFFSHORE PETROLEUM FACILITIES FOR UNCLASSIFIED AND CLASS 1, DIVISION 1 AND DIVISION 2 LOCATIONS |
| API 540:1999 | ELECTRICAL INSTALLATIONS IN PETROLEUM PROCESSING PLANTS |
| ANSI/CSA-B149.6-15 | Code for digester gas, landfill gas, and biogas generation and utilization |
| 13/30276640 DC : 0 | BS EN 62282-4-101 ED 1.0 - FUEL CELL TECHNOLOGIES - PART 4-101: FUEL CELL POWER SYSTEMS FOR PROPULSION FOR OTHER THAN ROAD VEHICLES AND AUXILIARY POWER UNITS - FUEL CELL POWER SYSTEMS FOR ELECTRICALLY POWERED INDUSTRIAL TRUCKS - SAFETY |
| CSA 6.25 : 2005 : INC : ADD A : 2007 : R2015 | CYLINDER CONNECTION DEVICES |
| BS EN 62282-4-101:2014 | Fuel cell technologies Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU). Safety of electrically powered industrial trucks |
| IEC 62282-4-101:2014 | Fuel cell technologies - Part 4-101: Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU) - Safety of electrically powered industrial trucks |
| ASTM E 2267 : 2004 : R2013 | Standard Guide for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings—Indoor Air Quality (Withdrawn 2022) |
| ASTM E 2267 : 2004 | Standard Guide for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings-Indoor Air Quality |
| BS ISO 13577-2:2014 | Industrial furnaces and associated processing equipment. Safety Combustion and fuel handling systems |
| AGA XH0201 : 2002 | FUNDAMENTALS OF GAS APPLIANCE VENTING & VENTILATION, COMBINED MANUAL & WORKBOOK |
| ANSI Z21.12 : 1990 | DRAFT HOODS |
| API 2510A : 1996 : R2015 | FIRE-PROTECTION CONSIDERATIONS FOR THE DESIGN AND OPERATION OF LIQUEFIED PETROLEUM GAS (LPG) STORAGE FACILITIES |
| MSS SP 133 : 2010 | EXCESS FLOW VALVES FOR LOW PRESSURE FUEL GAS APPLIANCES |
| AGA XH0205 : 2002 | FUNDAMENTALS OF GAS CONTROLS - COMBINED MANUAL & WORKBOOK |
| API 2510A : 1996 : R2010 | FIRE-PROTECTION CONSIDERATIONS FOR THE DESIGN AND OPERATION OF LIQUEFIED PETROLEUM GAS (LPG) STORAGE FACILITIES |
| NFPA 8506 : 1998 | HEAT RECOVERY STEAM GENERATOR SYSTEMS |
| ANSI Z21.58-2018/CSA 1.6-2018 | Outdoor cooking gas appliances |
| CSA 6.8 : 2005 | PILOT GAS FILTERS |
| CSA 6.32 : 2012 : INC : ADD A : 2013 | PRESS-CONNECT METALLIC FITTINGS FOR USE IN FUEL GAS DISTRIBUTION SYSTEMS |
| ANSI Z21.71:1993 | AUTOMATIC INTERMITTENT PILOT IGNITION SYSTEMS FOR FIELD INSTALLATION |
| ASTM F 2092 : 2014 : REDLINE | Standard Specification for Convection Oven Gas or Electric |
| ANSI Z21.80:2011 | LINE PRESSURE REGULATORS |
| CSA 6.3 : 2007 : INC : ADD B : 2012 : R2016 | GAS APPLIANCES PRESSURE REGULATORS |
| CSA 1.6 : 2018 | OUTDOOR COOKING GAS APPLIANCES |
| ANSI Z83.19-2017/CSA 2.35-2017 | Gas-fired high-intensity infrared heaters |
| ANSI/ASSE A10.27 : 1998 : R2005 | SAFETY REQUIREMENTS FOR HOT MIX ASPHALT FACILITIES |
| ANSI Z21.71 : 1993 : INC : ADD A : 2005 : R2012 | AUTOMATIC INTERMITTENT PILOT IGNITION SYSTEMS FOR FIELD INSTALLATION |
| CSA 6.3 : 2007 : INC : ADD A : 2010 : R2012 | GAS APPLIANCES PRESSURE REGULATORS |
| CSA C22.2 No. 199 :2007 | AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 2: PARTICULAR REQUIREMENTS FOR AUTOMATIC BURNER IGNITION SYSTEMS AND COMPONENTS |
| ANSI Z21.92 :2001 | MANUALLY OPERATED ELECTRIC GAS IGNITION SYSTEMS AND COMPONENTS |
| CSA 6.3 : 2007 : INC : ADD B : 2012 | GAS APPLIANCES PRESSURE REGULATORS |
| NFPA 484 : 2015 | COMBUSTIBLE METALS |
| ANSI Z21.73-2017/CSA 11.1-2017 | Portable type gas camp lights |
| CSA 11.3 : 2014 | PORTABLE TYPE GAS CAMP HEATERS |
| CSA N393:13 (R2018) | Fire protection for facilities that process, handle, or store nuclear substances |
| NFPA 1402 : 2012 | BUILDING FIRE SERVICE TRAINING CENTERS |
| ASAE EP364.1 : 1993 | INSTALLATION AND MAINTENANCE OF FARM STANDBY ELECTRIC POWER |
| NFPA 61D : 1989 | PREVENTION OF FIRE AND DUST EXPLOSIONS IN THE MILLING OF AGRICULTURAL COMMODITIES FOR HUMAN CONSUMPTION |
| NFPA 61A : 1989 | PREVENTION OF FIRE AND DUST EXPLOSIONS IN FACILITIES MANUFACTURING AND HANDLING STARCH |
| ASCE/SEI 25 16 : 2016 | EARTHQUAKE-ACTUATED AUTOMATIC GAS SHUTOFF DEVICES |
| CSA 6.5 : 2015 | AUTOMATIC VALVES FOR GAS APPLIANCES |
| ASTM F 1919 : 2014 : REDLINE | Standard Specification for Griddles, Single-Sided and Double-Sided, Gas and Electric |
| ANSI Z21.24 : 2015 | CONNECTORS FOR GAS APPLIANCES |
| ASTM F 2521 : 2009 | Standard Specification for Heavy-Duty Ranges, Gas and Electric |
| API 14FZ : 2013 | RECOMMENDED PRACTICE FOR DESIGN, INSTALLATION, AND MAINTENANCE OF ELECTRICAL SYSTEMS FOR FIXED AND FLOATING OFFSHORE PETROLEUM FACILITIES FOR UNCLASSIFIED AND CLASS 1, ZONE 0, ZONE 1, AND ZONE 2 LOCATIONS |
| API 14F REDLINE : 2008 | DESIGN, INSTALLATION, AND MAINTENANCE OF ELECTRICAL SYSTEMS FOR FIXED AND FLOATING OFFSHORE PETROLEUM FACILITIES FOR UNCLASSIFIED AND CLASS 1, DIVISION 1 AND DIVISION 2 LOCATIONS |
| ISO 13577-2:2014 | Industrial furnaces and associated processing equipment — Safety — Part 2: Combustion and fuel handling systems |
| API 500 : 2012 | RECOMMENDED PRACTICE FOR CLASSIFICATION OF LOCATIONS FOR ELECTRICAL INSTALLATIONS AT PETROLEUM FACILITIES CLASSIFIED AS CLASS 1, DIVISION 1 AND DIVISION 2 |
| ANSI LC 1 : 2018 | FUEL GAS PIPING SYSTEMS USING CORRUGATED STAINLESS STEEL TUBING |
| NFPA 1 : 2018 | FIRE CODE |
| NFPA 804 : 2020 | FIRE PROTECTION FOR ADVANCED LIGHT WATER REACTOR ELECTRIC GENERATING PLANTS |
| EN 62282-4-101:2014 | Fuel cell technologies - Part 4-101: Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU) - Safety of electrically powered industrial trucks |
| ASME B16.33 : 2012 : R2017 | MANUALLY OPERATED METALLIC GAS VALVES FOR USE IN GAS PIPING SYSTEMS UPTO 175 PSI (SIZES NPS 1/2 THROUGH NPS 2) |
| ASME B16.33 : 2012 | MANUALLY OPERATED METALLIC GAS VALVES FOR USE IN GAS PIPING SYSTEMS UPTO 175 PSI (SIZES NPS 1/2 THROUGH NPS 2) |
| CSA 6.16 : 2015 | CONNECTORS FOR MOVEABLE GAS APPLIANCES |
| CSA NGV1 : 2017 | COMPRESSED NATURAL GAS VEHICLE (NGV) FUELING CONNECTION DEVICES |
| ANSI Z83.21 : 2016 | COMMERCIAL DISHWASHERS |
| AWS B2.2/B2.2M : 2010 | SPECIFICATION FOR BRAZING PROCEDURE AND PERFORMANCE QUALIFICATION |
| ANSI Z83.4-2017/CSA 3.7-2017 | Non-recirculating direct gas-fired heating and forced ventilation appliances for commercial and industrial application |
| ANSI Z21.84 : 2012 | MANUALLY LIGHTED, NATURAL GAS, DECORATIVE GAS APPLIANCES FOR INSTALLATION IN SOLID-FUEL BURNING APPLIANCES |
| UL 103:11ED 2010-10 | Factory-Built Chimneys for Residential Type and Building Heating Appliances |
| ANSI Z21.75 : 2016 | CONNECTORS FOR OUTDOOR GAS APPLIANCES AND MANUFACTURED HOMES |
| ANSI NGV2 : 2016 | COMPRESSED NATURAL GAS VEHICLE FUEL CONTAINERS |
| API STD 1104:2013 | WELDING OF PIPELINES AND RELATED FACILITIES |
| ASTM A 254/A254M : 2012 : REDLINE | Standard Specification for Copper-Brazed Steel Tubing |
| CSA 6.24 : 2015 | GAS CONVENIENCE OUTLETS AND OPTIONAL ENCLOSURES |
| ANSI Z21.21 : 2015 | AUTOMATIC VALVES FOR GAS APPLIANCES |
| ANSI Z21.10.1 : 2014 | GAS WATER HEATERS, VOLUME 1, STORAGE WATER HEATERS WITH INPUT RATINGS OF 75,000 BTU PER HOUR OR LESS |
| CSA 2.6 : 2016 | GAS UNIT HEATERS, GAS PACKAGED HEATERS, GAS UTILITY HEATERS, AND GAS-FIRED DUCT FURNACES |
| ANSI Z21.58 : 2015 | OUTDOOR COOKING GAS APPLIANCES |
| CSA C22.2 No. 60730-2-5 : 2014 | AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 2-5: PARTICULAR REQUIREMENTS FOR AUTOMATIC ELECTRICAL BURNER CONTROL SYSTEMS |
| CSA 4.9 : 2014 | GAS-FIRED LOW PRESSURE STEAM AND HOT WATER BOILERS |
| ANSI Z21.13 : 2014 | GAS-FIRED LOW PRESSURE STEAM AND HOT WATER BOILERS |
| ANSI NGV1 : 2017 | COMPRESSED NATURAL GAS VEHICLE (NGV) FUELING CONNECTION DEVICES |
| NFPA 31 : 2016 | INSTALLATION OF OIL-BURNING EQUIPMENT |
| NFPA 58 : 2017 | LIQUEFIED PETROLEUM GAS CODE |
| MSS SP 6 : 2017 | STANDARD FINISHES FOR CONTACT FACES OF PIPE FLANGES AND CONNECTING-END FLANGES OF VALVES AND FITTINGS |
| UL 2561:2ED 2016-01 | 1400 Degree Fahrenheit Factory-Built Chimneys |
| NFPA 96 : 2017 | VENTILATION CONTROL AND FIRE PROTECTION OF COMMERCIAL COOKING OPERATIONS |
| ANSI Z21.11.2 : 2013 | GAS-FIRED ROOM HEATERS, VOLUME II, UNVENTED ROOM HEATERS |
| NFPA 30A : 2018 | MOTOR FUEL DISPENSING FACILITIES AND REPAIR GARAGES |
| NFPA 61 : 2017 | PREVENTION OF FIRES AND DUST EXPLOSIONS IN AGRICULTURAL AND FOOD PROCESSING FACILITIES |
| ANSI Z21.69 : 2015 | CONNECTORS FOR MOVEABLE GAS APPLIANCES |
| ASME PV CODE 9 : 2017 | BOILER AND PRESSURE VESSEL CODE - WELDING, BRAZING, AND FUSING QUALIFICATIONS - QUALIFICATION STANDARD FOR WELDING, BRAZING, AND FUSING PROCEDURES; WELDERS; BRAZERS; AND WELDING, BRAZING, AND FUSING OPERATORS |
| NFPA 853 : 2010 | INSTALLATION OF STATIONARY FUEL CELL POWER SYSTEMS |
| NFPA 780 : 2017 | INSTALLATION OF LIGHTNING PROTECTION SYSTEMS |
| ANSI Z21.22 : 2015 | RELIEF VALVES FOR HOT WATER SUPPLY SYSTEMS |
| CSA 6.5 : 2015 | AUTOMATIC VALVES FOR GAS APPLIANCES |
| CSA 4.7 : 2014 | GAS-FIRED POOL HEATERS |
| ANSI Z21.40.1 : 1996 | GAS-FIRED, HEAT ACTIVATED AIR CONDITIONING AND HEAT PUMP APPLIANCES |
| NFPA 101 : 2018 | LIFE SAFETY CODE |
| CSA 2.33 : 2016 | VENTED GAS FIREPLACE HEATERS |
| CSA 4.3 : 2014 | GAS-FIRED WATER HEATERS, VOLUME 3, STORAGE WATER HEATERS WITH INPUT RATINGS ABOVE 75,000 BTU PER HOUR, CIRCULATING AND INSTANTANEOUS |
| CSA 6.22 : 2011 | LINE PRESSURE REGULATORS |
| ANSI FC 1 : 2012 | STATIONARY FUEL CELL POWER SYSTEMS |
| ANSI NGV3.1 : 2014 | FUEL SYSTEM COMPONENTS FOR COMPRESSED NATURAL GAS POWERED VEHICLES |
| ASME B16.42 : 2016 | DUCTILE IRON PIPE FLANGES AND FLANGED FITTINGS - CLASSES 150 AND 300 |
| ANSI Z21.5.2 : 2016 | GAS CLOTHES DRYERS, VOLUME 2, TYPE 2 CLOTHES DRYERS |
| ANSI Z83.18 : 2015 | RECIRCULATING DIRECT GAS-FIRED HEATING AND FORCED VENTILATION APPLIANCES FOR COMMERCIAL AND INDUSTRIAL APPLICATIONS |
| NFPA 90A : 2018 | INSTALLATION OF AIR-CONDITIONING AND VENTILATING SYSTEMS |
| NFPA 501 : 2017 | MANUFACTURED HOUSING |
| NFPA 5000 : 2018 | BUILDING CONSTRUCTION AND SAFETY CODE |
| ASME PV CODE 4 : 2017 | BPVC Section IV-BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF HEATING BOILERS |
| CSA 12.3 : 2014 | FUEL SYSTEM COMPONENTS FOR COMPRESSED NATURAL GAS POWERED VEHICLES |
| CSA 4.4 : 2015 | RELIEF VALVES FOR HOT WATER SUPPLY SYSTEMS |
| UL 378:4ED 2006-10 | Standard for Draft Equipment |
| NFPA 88A : 2015 | PARKING STRUCTURES |
| NFPA 90B : 2018 | INSTALLATION OF WARM AIR HEATING AND AIR-CONDITIONING SYSTEMS |
| ASME B16.20 : 2012 | METALLIC GASKETS FOR PIPE FLANGES |
| NFPA 501A : 2017 | FIRE SAFETY CRITERIA FOR MANUFACTURED HOME INSTALLATIONS, SITES, AND COMMUNITIES |
| CSA 7.1 : 2016 | GAS CLOTHES DRYERS, VOLUME 1, TYPE 1 CLOTHES DRYERS |
| ANSI Z21.90 : 2015 | GAS CONVENIENCE OUTLETS AND OPTIONAL ENCLOSURES |
| ASHRAE HDBK FUNDAMENTALS : 2013 | ASHRAE HANDBOOK - FUNDAMENTALS |
| CSA 6.27 : 2016 | CONNECTORS FOR OUTDOOR GAS APPLIANCES AND MANUFACTURED HOMES |
| ASTM A 254 : 1997 | Standard Specification for Copper-Brazed Steel Tubing |
| ANSI Z83.20 : 2016 | GAS-FIRED TUBULAR AND LOW-INTENSITY INFRARED HEATERS |
| ANSI Z21.50 : 2016 | VENTED DECORATIVE GAS APPLIANCES |
| UL 651:8ED 2011-10 | Schedule 40, 80, Type EB and A Rigid PVC Conduit and Fittings |
| CSA/ANSI Z21.42:13 (R2018) | Gas-fired illuminating appliances |
| CSA 2.22 : 2016 | VENTED DECORATIVE GAS APPLIANCES |
| ANSI Z21.61 : 1983 | GAS-FIRED TOILETS |
| ANSI Z21.86-2016/CSA 2.32-2016 | VENTED GAS-FIRED SPACE HEATING APPLIANCES |
| ASME B16.1 : 2015 | Gray Iron Pipe Flanges and Flanged Fittings: Classes 25, 125, and 250 |
| ASTM D 2385 : 1981 : R1990 | Test Method for Hydrogen Sulfide and Mercaptan Sulfur in Natural Gas (Cadmium Sulfate-Iodometric Titration Method) (Withdrawn 1995) |
| ASME B1.20.1 : 2013(R2018) | PIPE THREADS, GENERAL PURPOSE (INCH) |
| CSA 6.10 : 2015 | CONNECTORS FOR GAS APPLIANCES |
| UL 959:9ED 2010-12 | Medium Heat Appliance Factory-Built Chimneys |
| NFPA 68 : 2013 | EXPLOSION PROTECTION BY DEFLAGRATION VENTING |
| ASTM D 2513 : 2017-01 | SPECIFICATION FOR POLYETHYLENE (PE) GAS PRESSURE PIPE, TUBING, AND FITTINGS |
| ANSI/CSA FC 1:2014 | FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY |
| ANSI Z21.47 : 2016 | GAS-FIRED CENTRAL FURNACES |
| NFPA 86 : 2015 | OVENS AND FURNACES |
| ASTM B 88 : 2016 : REDLINE | Standard Specification for Seamless Copper Water Tube |
| CSA 4.1 : 2014 | GAS WATER HEATERS, VOLUME 1, STORAGE WATER HEATERS WITH INPUT RATINGS OF 75,000 BTU PER HOUR OR LESS |
| UL 441:11ED 2016-04 | Gas Vents |
| AWS B2.1/B2.1M : 2014 | SPECIFICATION FOR WELDING PROCEDURE AND PERFORMANCE QUALIFICATION |
| NFPA 52 : 2016 | VEHICULAR NATURAL GAS FUEL SYSTEMS CODE |
| NFPA 1192 : 2018 | RECREATIONAL VEHICLES |
| ANSI Z21.88 : 2016 | VENTED GAS FIREPLACE HEATERS |
| NFPA 59 : 2018 | UTILITY LP-GAS PLANT CODE |
| ASME B36.10M : 2015 | WELDED AND SEAMLESS WROUGHT STEEL PIPE |
| ANSI Z21.19-2014/CSA 1.4-2014 | REFRIGERATORS USING GAS FUEL |
| NFPA 70 : 2017 | NATIONAL ELECTRICAL CODE |
| CSA 6.9 : 2014 | QUICK DISCONNECT DEVICES FOR USE WITH GAS FUEL APPLIANCES |
| ASTM F 2509 : 2015-12 | SPECIFICATION FOR FIELD-ASSEMBLED ANODELESS RISER KITS FOR USE ON OUTSIDE DIAMETER CONTROLLED POLYETHYLENE GAS DISTRIBUTION PIPE AND TUBING |
| NFPA 56 : 2017 | FIRE AND EXPLOSION PREVENTION DURING CLEANING AND PURGING OF FLAMMABLE GAS PIPING SYSTEMS |
| ANSI Z21.93 : 2013 | EXCESS FLOW VALVES FOR NATURAL AND PROPANE GAS WITH PRESSURES UP TO 5 PSIG |
| NACE SP 01 69 : 2013 | CONTROL OF EXTERNAL CORROSION ON UNDERGROUND OR SUBMERGED METALLIC PIPING SYSTEMS |
| CSA 2.26 : 2012 | DECORATIVE GAS APPLIANCES FOR INSTALLATION IN SOLID-FUEL BURNING FIREPLACES |
| NFPA 51 : 2018 | DESIGN AND INSTALLATION OF OXYGEN-FUEL GAS SYSTEMS FOR WELDING, CUTTING, AND ALLIED PROCESSES |
| CSA 8.4 : 2014 | GAS HOSE CONNECTORS FOR PORTABLE OUTDOOR GAS-FIRED APPLIANCES |
| NFPA 409 : 2016 | AIRCRAFT HANGARS |
| ASME B16.5 : 2017 | PIPE FLANGES AND FLANGED FITTINGS: NPS 1/2 THROUGH NPS 24 METRIC/INCH STANDARD |
| ANSI Z83.4-2017/CSA 3.7-2017 | NON-RECIRCULATING DIRECT GAS-FIRED HEATING AND FORCED VENTILATION APPLIANCES FOR COMMERCIAL AND INDUSTRIAL APPLICATION |
| ASME B16.21 : 2016 | NONMETALLIC FLAT GASKETS FOR PIPE FLANGES |
| ANSI Z21.54 : 2014 | GAS HOSE CONNECTORS FOR PORTABLE OUTDOOR GAS-FIRED APPLIANCES |
| CSA 1.8 : 2016 | GAS FOOD SERVICE EQUIPMENT |
| ANSI Z21.91 : 2007 | VENTLESS FIREBOX ENCLOSURES FOR GAS-FIRED UNVENTED DECORATIVE ROOM HEATERS |
| NFPA 30 : 2018 | FLAMMABLE AND COMBUSTIBLE LIQUIDS CODE |
| ANSI Z21.56 : 2014 | GAS-FIRED POOL HEATERS |
| ANSI Z21.60 : 2012 | DECORATIVE GAS APPLIANCES FOR INSTALLATION IN SOLID-FUEL BURNING FIREPLACES |
| CSA NGV 5.1 : 2016 | RESIDENTIAL FUELING APPLIANCES |
| ANSI Z21.41 : 2014 | QUICK DISCONNECT DEVICES FOR USE WITH GAS FUEL APPLIANCES |
| CFR 49(PTS178-199) : OCT 2017 | TRANSPORTATION |
| UL 641:8ED 2010-12 | Standard for Type L Low-Temperature Venting Systems |
| CSA C22.2 No. 168 : 2016 | COMMERCIAL DISHWASHERS |
| ANSI Z83.20-2016/CSA 2.34-2016 | Gas-fired tubular and low-intensity infrared heaters |
| CSA 6.26 : 2016 | FUEL GAS PIPING SYSTEMS USING CORRUGATED STAINLESS STEEL TUBING |
| ASTM B 241/B241M : 2016 : REDLINE | Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube |
| ANSI Z21.86-2016/CSA 2.32-2016 | Vented gas-fired space heating appliances |
| ANSI Z83.11 : 2016 | GAS FOOD SERVICE EQUIPMENT |
| NFPA 82 : 2014 | INCINERATORS AND WASTE AND LINEN HANDLING SYSTEMS AND EQUIPMENT |
| NFPA 37 : 2018 | INSTALLATION AND USE OF STATIONARY COMBUSTION ENGINES AND GAS TURBINES |
| ANSI Z21.1 : 2016 | HOUSEHOLD COOKING GAS APPLIANCES |
| ANSI Z21.19 : 2014 | REFRIGERATORS USING GAS FUEL |
| CSA 1.6 : 2015 | OUTDOOR COOKING GAS APPLIANCES |
| SAE J 533 : 2017 | FLARES FOR TUBING |
| ASME B16.47 : 2017 | LARGE DIAMETER STEEL FLANGES: NPS 26 THROUGH NPS 60 METRIC/INCH STANDARD |
| NFPA 211 : 2016 | CHIMNEYS, FIREPLACES, VENTS, AND SOLID FUEL-BURNING APPLIANCES |
| ANSI Z21.5.1 : 2016 | GAS CLOTHES DRYERS, VOLUME 1, TYPE 1 CLOTHES DRYERS |
| ANSI Z21.24 : 2015 | CONNECTORS FOR GAS APPLIANCES |
| ANSI Z21.66 : 2015 | AUTOMATIC DAMPER DEVICES FOR USE WITH GAS-FIRED APPLIANCES |
| CSA 1.1 : 2016 | HOUSEHOLD COOKING GAS APPLIANCES |
| CSA 2.3 : 2016 | GAS-FIRED CENTRAL FURNACES |
| ANSI Z21.5.2-2016/CSA 7.2:2016 | GAS CLOTHES DRYERS, VOLUME 2, TYPE 2 CLOTHES DRYERS |
| ANSI LC 1 : 2016 | FUEL GAS PIPING SYSTEMS USING CORRUGATED STAINLESS STEEL TUBING |
| MSS SP 58 : 2009 | PIPE HANGERS AND SUPPORTS - MATERIALS, DESIGN, MANUFACTURE, SELECTION, APPLICATION, AND INSTALLATION |
| ANSI Z21.12 : 1990 | DRAFT HOODS |
| ANSI Z83.8 : 2016 | GAS UNIT HEATERS, GAS PACKAGED HEATERS, GAS UTILITY HEATERS, AND GAS-FIRED DUCT FURNACES |
| CSA 6.30 : 2013 | EXCESS FLOW VALVES FOR NATURAL AND PROPANE GAS WITH PRESSURES UP TO 5 PSIG |
| ASHRAE HDBK HVAC SYSTEMS & EQUIPMENT : 2012 | ASHRAE HANDBOOK - HVAC SYSTEMS AND EQUIPMENT |
| CGA 6.14 : 2015 | AUTOMATIC DAMPER DEVICES FOR USE WITH GAS-FIRED APPLIANCES |
US$117.60
Excluding Tax where applicable
USD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.