• There are no items in your cart

PREN 17175 : DRAFT 2017

Current
Current

The latest, up-to-date edition.

GAS-FIRED OVERHEAD RADIANT STRIP HEATERS AND MULTI-BURNER CONTINUOUS RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - SAFETY AND ENERGY EFFICIENCY
Published date

01-09-2018

European foreword
1 Scope
2 Normative references
3 Terms, definitions and symbols
4 Classification of appliances
5 Constructional requirements
6 Operational requirements
7 Energy Efficiency
8 Requirements of energy efficiency (rational use of energy)
9 Risk assessment
10 Marking and instructions
Annex ZA (informative) - Relationship between this European
         Standard and the essential requirements of Regulation
         EU 2016/426 aimed to be covered
Annex ZB (informative) - Relationship between this European
         Standard and the ecodesign requirements of Commission
         Regulation (EU) No 2015/1188 aimed to be covered
Bibliography

Defines the requirements and test methods for the construction, safety, classification, marking and efficiency of non-domestic gas-fired overhead radiant strips heaters and multi-burner continuous radiant tube heater systems (referred to in the body of the text as the 'system') with each burner unit under the control of an automatic burner control system.

Committee
TC 180
DocumentType
Draft
PublisherName
Comite Europeen de Normalisation
Status
Current

Standards Relationship
17/30363959 DC : DRAFT DEC 2017 Identical

EN 1859:2009+A1:2013 Chimneys - Metal chimneys - Test methods
ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories
IEC 60730-2-9:2015 RLV Automatic electrical controls - Part 2-9: Particular requirements for temperature sensing controls
ISO 7005-2:1988 Metallic flanges — Part 2: Cast iron flanges
ISO 6976:2016 Natural gas — Calculation of calorific values, density, relative density and Wobbe indices from composition
EN 10226-2:2005 Pipe threads where pressure tight joints are made on the threads - Part 2: Taper external threads and taper internal threads - Dimensions, tolerances and designation
EN 12067-2:2004 Gas/air ratio controls for gas burners and gas burning appliances - Part 2: Electronic types
EN 1057:2006+A1:2010 Copper and copper alloys - Seamless, round copper tubes for water and gas in sanitary and heating applications
EN 60730-2-9:2010 Automatic electrical controls for household and similar use - Part 2-9: Particular requirements for temperature sensing controls
EN 13216-1:2004 Chimneys - Test methods for system chimneys - Part 1: General test methods
ISO 7005-3:1988 Metallic flanges Part 3: Copper alloy and composite flanges
EN ISO 1182:2010 Reaction to fire tests for products - Non-combustibility test (ISO 1182:2010)
EN 14597:2012 Temperature control devices and temperature limiters for heat generating systems
EN 416-1:2009 Single burner gas-fired overhead radiant tube heaters for non-domestic use - Part 1: Safety
EN 13410:2001/AC:2002 GAS-FIRED OVERHEAD RADIANT HEATERS - VENTILATION REQUIREMENTS FOR NON-DOMESTIC PREMISES
EN ISO 3166-1:2014 Codes for the representation of names of countries and their subdivisions - Part 1: Country codes (ISO 3166-1:2013)
EN 161:2011+A3:2013 Automatic shut-off valves for gas burners and gas appliances
IEC 60335-2-10:2002+AMD1:2008 CSV Household and similar electrical appliances - Safety - Part 2-10: Particular requirements for floor treatment machines and wet scrubbing machines
EN 15266:2007 Stainless steel pliable corrugated tubing kits in buildings for gas with an operating pressure up to 0,5 bar
ISO 1182:2010 Reaction to fire tests for products Non-combustibility test
EN ISO 228-1:2003 Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000)
EN 14459:2015 Safety and control devices for burners and appliances burning gaseous or liquid fuels - Control functions in electronic systems - Methods for classification and assessment
ISO 7-1:1994 Pipe threads where pressure-tight joints are made on the threads Part 1: Dimensions, tolerances and designation
EN 437:2003+A1:2009 Test gases - Test pressures - Appliance categories
EN 125:2010+A1:2015 Flame supervision devices for gas burning appliances - Thermoelectric flame supervision devices
EN 60751:2008 INDUSTRIAL PLATINUM RESISTANCE THERMOMETERS AND PLATINUM TEMPERATURE SENSORS
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV Degrees of protection provided by enclosures (IP Code)
EN 126:2012 Multifunctional controls for gas burning appliances
EN 60584-1:2013 Thermocouples - Part 1: EMF specifications and tolerances
EN 13611:2015/AC:2016 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
CEN/TR 1749:2014 European scheme for the classification of gas appliances according to the method of evacuation of the combustion products (types)
CR 1404:1994 Determination of emissions from appliances burning gaseous fuels during type-testing
IEC 60730-2-1:1989 Automatic electrical controls for household and similar use. Part 2: Particular requirements for electrical controls for electrical household appliances
EN 60335-2-102:2016 Household and similar electrical appliances - Safety - Part 2-102: Particular requirements for gas, oil and solid-fuel burning appliances having electrical connections
EN 14471:2013+A1:2015 CHIMNEYS - SYSTEM CHIMNEYS WITH PLASTIC FLUE LINERS - REQUIREMENTS AND TEST METHODS
EN 60730-2-1 : 97 AMD 11 2005 AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 2-1: PARTICULAR REQUIREMENTS FOR ELECTRICAL CONTROLS FOR ELECTRICAL HOUSEHOLD APPLIANCES
EN 12828:2012+A1:2014 Heating systems in buildings - Design for water-based heating systems
IEC 60751:2008 Industrial platinum resistance thermometers and platinum temperature sensors
IEC 60730-2-5:2013+AMD1:2017 CSV Automatic electrical controls - Part 2-5: Particular requirements for automatic electrical burner control systems
ISO 3166-1:2013 Codes for the representation of names of countries and their subdivisions Part 1: Country codes
EN 15502-2-1:2012+A1:2016 Gas-fired central heating boilers - Part 2-1: Specific standard for type C appliances and type B2, B3 and B5 appliances of a nominal heat input not exceeding 1 000 kW
EN 60335-1:2012/A13:2017 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60335-1:2010, MODIFIED)
EN 60730-2-5:2015 Automatic electrical controls - Part 2-5: Particular requirements for automatic electrical burner control systems
EN 298:2012 Automatic burner control systems for burners and appliances burning gaseous or liquid fuels
ISO 7005-1:2011 Pipe flanges — Part 1: Steel flanges for industrial and general service piping systems
EN 60529:1991/AC:2016-12 DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015)
EN ISO 6976:2016 Natural gas - Calculation of calorific values, density, relative density and Wobbe indices from composition (ISO 6976:2016)
EN 1856-1:2009 Chimneys - Requirements for metal chimneys - Part 1: System chimney products
EN 1106:2010 Manually operated taps for gas burning appliances
EN 10226-1:2004 Pipe threads where pressure tight joints are made on the threads - Part 1: Taper external threads and parallel internal threads - Dimensions, tolerances and designation
IEC 60584-1:2013 Thermocouples - Part 1: EMF specifications and tolerances
EN 88-1:2011+A1:2016 Pressure regulators and associated safety devices for gas appliances - Part 1: Pressure regulators for inlet pressures up to and including 50 kPa
ISO 228-1:2000 Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designation
EN 14800:2007 Corrugated safety metal hose assemblies for the connection of domestic appliances using gaseous fuels
EN 60730-1:2016 Automatic electrical controls - Part 1: General requirements
EN 257:2010 Mechanical thermostats for gas-burning appliances

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.