PREN 4632-003 : DRAFT 2008

Withdrawn

AEROSPACE SERIES - WELDABILITY AND BRAZEABILITY OF MATERIALS IN AEROSPACE CONSTRUCTIONS - PART 003: HOMOGENEOUS ASSEMBLIES OF UNALLOYED AND LOW ALLOY STEELS

Withdrawn date

12-26-2023

Published date

01-12-2013

Publisher

Aerospace & Defence Industries Association of Europe

Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Use of this standard
5 Updating this standard
6 Index of steel sheets
7 Material sheets
Bibliography

Describes degrees of weldability and brazeability for materials or families of materials used in the aerospace industry.

DocumentType	Draft
ProductNote	Superseded by EN 4632-003:2010
PublisherName	Aerospace & Defence Industries Association of Europe
Status	Withdrawn

Standards	Relationship
NF EN 4632-003 : 2010	Identical

EN 10052:1993	Vocabulary of heat treatment terms for ferrous products
EN 1045:1997	Brazing - Fluxes for brazing - Classification and technical delivery conditions
EN 439 : 1994	WELDING CONSUMABLES - SHIELDING GASES FOR ARC WELDING AND CUTTING
EN 440 : 1994	WELDING CONSUMABLES - WIRE ELECTRODES AND DEPOSITS FOR GAS SHIELDED METAL ARC WELDING OF NON ALLOY AND FINE GRAIN STEELS - CLASSIFICATION
EN 3969:2006	Aerospace series - Steel FE-PL1507 (40CrMoV12) - Air melted - Annealed - Forging stock - a or D ≤ 350 mm
PREN 2220 : 1
EN 10028-1:2017	Flat products made of steels for pressure purposes - Part 1: General requirements
EN 10028-3:2017	Flat products made of steels for pressure purposes - Part 3: Weldable fine grain steels, normalized
PREN 3522 : 200P1	AEROSPACE SERIES - STEEL FE-PL79 - SOFTENED - REFERENCE HEAT TREATMENT: CARBURIZED, HARDENED AND TEMPERED - FORGING STOCK - D[E] <= 200 MM
EN 3972:2006	Aerospace series - Steel FE-PL1507 (40CrMoV12) - Consumable electrode remelted - Hardened and tempered - Bar for machining - De ≤ 50 mm - 1 250 MPa ≤ Rm ≤ 1 400 MPa
PREN 3526 : 200P2	AEROSPACE SERIES - STEEL FE-PL1505 (15CRMOV6) - AIR MELTED - HARDENED AND TEMPERED - SHEET AND STRIP - 0,5 MM <= A <= 6 MM - 980 MPA <= R[M] <= 1180 MPA
EN 4332:2002	Aerospace series - Steel FE-WL1805 (8CrMnMo12-4-9) - Filler metal for welding - Wire and rod
EN 4632-001:2008	Aerospace series - Welded and brazed assemblies for aerospace constructions - Weldability and brazeability of materials - Part 001: General requirements
ASTM A 516/A516M : 2017 : REDLINE	Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service
EN ISO 4063:2010	Welding and allied processes - Nomenclature of processes and reference numbers (ISO 4063:2009, Corrected version 2010-03-01)
EN 10025:1990/A1:1993	HOT ROLLED PRODUCTS OF NON-ALLOY STRUCTURAL STEELS - TECHNICAL DELIVERY CONDITIONS
AWS A5.5 : 1996	SPECIFICATION FOR LOW ALLOY STEEL ELECTRODES FOR SHIELDED METAL ARC WELDING
EN 4334:2002	Aerospace series - Steel FE-WL1806 (15CrMnMoV5-4-9-3) - Filler metal for welding - Wire and rod
EN 4098:2007	Aerospace series - Steel FE-PL1507 (40CrMoV12) - Remelted, hardened and tempered, forgings De ≤ 50 mm, 1 250 MPa ≤ Rm ≤ 1 400 MPa
PREN 2135 : 200P1	AEROSPACE SERIES - STEEL FE-PL61 - CARBURIZED, HARDENED AND TEMPERED - BAR D[E] <= 40 MM
EN 10028-2:2017	Flat products made of steels for pressure purposes - Part 2: Non-alloy and alloy steels with specified elevated temperature properties
ISO/TR 17671-2:2002	Welding Recommendations for welding of metallic materials Part 2: Arc welding of ferritic steels
PREN 2768 : 200P2	AEROSPACE SERIES - STEEL FE-PL79 - CARBURIZED, HARDENED AND TEMPERED -1180 <= R[M] <= 1550 MPA - FORGINGS - D[E] <= 150 MM
EN 3524:2007	Aerospace series - Steel FE-PL1505 (15CrMoV6) - Air melted - Hardened and tempered - Sheet and strip - 2 mm ≤ a ≤ 6 mm - 1 080 MPa ≤ Rm ≤ 1 280 MPa
EN 1599 : 1997	WELDING CONSUMABLES - COVERED ELECTRODES FOR MANUAL METAL ARC WELDING OF CREEP-RESISTING STEELS - CLASSIFICATION
EN 3525:2007	Aerospace series - Steel FE-PL1505 (15CrMoV6) - Air melted - Hardened and tempered - Plate - 6 mm < a ≤ 20 mm - 1 080 MPa ≤ Rm ≤ 1 280 MPa
PREN 2780 : 200P1	AEROSPACE SERIES - STEEL FE-PL56 - HARDENED AND TEMPERED - 1250 <= R[M] <= 1400 MPA - FORGINGS - D[E] <= 70 MM
EN 10222-3:2017	Steel forgings for pressure purposes - Part 3: Nickel steels with specified low temperature properties
EN 4331:2002	Aerospace series - Steel FE-WL1804 (25CrMnMo4-2-2) - Filler metal for welding - Wire and rod
EN 10222-4:2017	Steel forgings for pressure purposes - Part 4: Weldable fine grain steels with high proof strength
PREN 3523 : 200P2
EN 10222-2:2017	Steel forgings for pressure purposes - Part 2: Ferritic and martensitic steels with specified elevated temperatures properties
PREN 2779 : 200P1	AEROSPACE SERIES - STEEL FE-PL56 - HARDENED AND TEMPERED - 1250 <= R[M] <= 1400 MPA - BAR - D[E] <= 70 MM
EN 499 : 1994	WELDING CONSUMABLES - COVERED ELECTRODES FOR MANUAL METAL ARC OF NON ALLOY AND FINE GRAIN STEELS - CLASSIFICATION
EN 10083-1:2006	Steels for quenching and tempering - Part 1: General technical delivery conditions
EN 10027-1:2016	Designation systems for steels - Part 1: Steel names
EN 10084:2008	Case hardening steels - Technical delivery conditions
EN 758 : 1997	WELDING CONSUMABLES - TUBULAR COVERED ELECTRODES FOR METAL ARC WELDING WITH AND WITHOUT A GAS SHIELD OF NON ALLOY AND FINE GRAIN STEELS - CLASSIFICATION
PREN 2767 : 200P2	AEROSPACE SERIES - STEEL FE-PL79 - CARBURIZED, HARDENED AND TEMPERED - 1180 <= R[M] <= 1550 MPA - BAR FOR MACHINING - D[E] <= 150 MM
PREN 2213 : 200P1	AEROSPACE SERIES - STEEL FE-PL1505 (15CRMOV6) - AIR MELTED - HARDENED AND TEMPERED - BARS - D[E] <= 16 MM - 980 MPA <= R[M] <= 1180 MPA
ISO 636:2017	Welding consumables — Rods, wires and deposits for tungsten inert gas welding of non-alloy and fine-grain steels — Classification
AWS A5.28 : 1996	SPECIFICATION FOR LOW ALLOY STEEL FILLER METALS FOR GAS SHIELDED ARC WELDING
EN 3971:2006	Aerospace series - Steel FE-PL1507 (40CrMoV12) - Consumable electrode remelted - Annealed - Forging stock - a or D ≤ 350 mm
EN 10222-1:2017	Steel forgings for pressure purposes - Part 1: General requirements for open die forgings
PREN 2218 : 1	AEROSPACE SERIES - STEEL FE-PL52 S - 980 MPA <= R[M] <= 1180 MPA - TUBES FOR STRUCTURES A <= 4 MM D >= 5A