QQ-N-286 Revision G:2000
Current
Current
The latest, up-to-date edition.
NICKEL-COPPER ALUMINUM ALLOY, WROUGHT (UNS N05500)
Available format(s)
PDF
Language(s)
English
Publisher
Requirements for all wrought forms of UNS N05500 nickel-copper-aluminum alloy.
| Committee |
FSC 9535
|
| DevelopmentNote |
Supersedes MIL W 4471, MIL F 23999 and MIL N 17506 (A). (07/2004)
|
| DocumentType |
Standard
|
| Pages |
42
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| SAE AMS 4676 : 2017 | Similar to |
| SAE AMS 4677 : 2017 | Similar to |
| DOD-HDBK-249 Revision A:1984 | METALS AND ALLOYS RAPID ON-SITE IDENTIFICATION OF (RECOMMENDED PROCEDURE FOR CHEMICAL SPOT TESTING AND ASSOCIATED PHYSICAL TESTS TO VERIFY METAL ALLOY CLASSIFICATION) (METRIC) |
| MIL V 1189 : D | VALVE, GATE, BRONZE, FLANGED ENDS, WORKING PRESSURES UP TO 400 PS [SHIPBOARD USE] |
| MIL-G-24745 Base Document:1990 | GOVERNORS, STEAM DRIVEN PUMP, PRESSURE REGULATING, NAVAL SHIPBOARD, 600 POUNDS PER SQUARE INCH STEAM SERVICE |
| MIL H 24136/4 : A | HOSE, SYNTHETIC RUBBER, SYNTHETIC FIBER REINFORCED, FOR FLEXIBLE HOSE ASSEMBLIES (LOW PRESSURE SIZES -40, -48 AND -64) |
| MIL-L-16383 Revision H:1988 | LIFE PRESERVER, CARBON DIOXIDE INFLATABLE, UNDERWATER DEMOLITION TEAM |
| MIL F 24787/5 : 0 | FITTINGS, END, TYPE D, HOSE TO HOSE 90 DEGREES ELBOW, REUSABLE FOR FLEXIBLE HOSE ASSEMBLIES |
| MIL-E-16400 Revision H:1987 | ELECTRONIC, INTERIOR COMMUNICATIONS AND NAVIGATION EQUIPMENT, NAVAL SHIP AND SHORE, GENERAL SPECIFICATION FOR |
| MIL-HDBK-2189-243-1 Base Document:1994 | DESIGN METHODS FOR NAVAL SHIPBOARD SYSTEMS - SECTION 243-1 - PART 1: PROPULSION SHAFTING |
| MIL C 24231 : D | CONNECTOR, PLUGS, RECEPTACLES, ADAPTORS, HULL INSERTS AND HULL INSERT PLUGS, PRESSURE-PROOF, GENERAL SPECIFICATION FOR |
| MIL-PRF-32307 Revision A:2017 | VALVE, QUARTER TURN, TRIPLE-OFFSET, TORQUE SEATED, SHIPBOARD USE |
| MIL-V-24384 Revision B:1988 | Valve, Pressure Regulating, for Low Pressure Air or Nitrogen Systems |
| MIL V 24569 : 0 | VALVE, QUICK CLOSING, FOR FUEL OIL AND AUXILIARY STEAM EMERGENCY SHUTDOWN |
| DOD-B-82737 Base Document:1987 | BALLS, BEARING, FERROUS AND NON-FERROUS, (FOR USE IN BEARINGS, VALVES AND BEARING APPLICATIONS) - GENERAL SPECIFICATION FOR |
| MIL C 24774 : 0 | CHAIN, STUD LINK, ANCHOR, FLASH BUTT WELDED, NONMAGNETIC |
| MIL-H-21367 Revision E:1985 | HULL FITTINGS: CONNECTORS, ADAPTER, END SEALS, AND STUFFING TUBES FOR FLEXIBLE, SOLID-DIELECTRIC, RADIO-FREQUENCY CABLES |
| MIL-HDBK-11991 Base Document:1996 | DESIGN OF ELECTRICAL, ELECTRONIC, AND ELECTRO-MECHANICAL EQUIPMENT, GUIDED MISSILE AND ASSOCIATED WEAPONS SYSTEMS |
| MIL-H-24520 Base Document:1975 | MILITARY SPECIFICATION - HOSE AND HOSE ASSEMBLY FOR WATER COOLING OF ELECTRONIC EQUIPMENT |
| MIL H 52471 : D | HOSE AND HOSE ASSEMBLIES, RUBBER, HYDRAULIC PRESSURE TYPE, GENERAL SPECIFICATION FOR |
| MIL-P-18324 Revision D:1964 | PLASTIC MATERIAL, LAMINATED PHENOLIC, FOR BEARINGS (WATER OR GREASE LUBRICATION) |
| MIL-DTL-18030 Revision F:2018 | Valves, Control, Air-Diaphragm-Operated (Complete with Pneumatic Instrumentation) |
| MIL-U-18033 Revision F:1962 | UNDERWATER LOG EQUIPMENT, ELECTROMAGNETIC TYPE |
| MIL L 24047 : A | LIFE PRESERVER, YOKE TYPE, SCUBA, U.S. NAVY MARK 3 |
| MIL H 24136/1 : A | HOSE, SYNTHETIC RUBBER, SYNTHETIC FIBER REINFORCED FOR FLEXIBLE HOSE ASSEMBLIES (LOW PRESSURE SIZES -80 THROUGH -192) |
| FF-B-584 Revision F:1989 | BOLTS, FINNED NECK, KEY HEAD, MACHINE, RIBBED NECK, SQUARE NECK, TEE HEAD |
| MIL-F-24787-7 Base Document:1993 | FITTINGS, END, TYPES B AND BL, GASKET SEAL UNION, REUSABLE FOR FLEXIBLE HOSE ASSEMBLIES |
| ASTM F 3042 : 2013 | Standard Specification for Nonferrous Hex Socket, Slotted Headless, and Square Head Set Screws |
| SAE J 2655 : 2015 | FASTENER PART STANDARD - WASHERS AND LOCKWASHERS (INCH DIMENSIONED) |
| ASTM F 2215 : 2015 : REDLINE | Standard Specification for Balls, Bearings, Ferrous and Nonferrous for Use in Bearings, Valves, and Bearing Applications |
| ASTM F 1387 : 1999 | Standard Specification for Performance of Piping and Tubing Mechanically Attached Fittings |
| MIL-S-21472 Revision C:1988 | SCREW, SHOULDER, HEXAGON SOCKET-HEAD AND SLOTTED-HEAD GENERAL SPECIFICATION FOR |
| MIL-DTL-1222 Revision J:2000 | STUDS, BOLTS, SCREWS AND NUTS FOR APPLICATIONS WHERE A HIGH DEGREE OF RELIABILITY IS REQUIRED; GENERAL SPECIFICATION FOR |
| MIL-S-24686 Revision A:1992 | SPRINKLER, AUTOMATIC, QUICK RESPONSE |
| FF-S-85 Revision D:2005 | Screw, Cap, Slotted and Hexagon Head |
| MIL STD 11991 : A | GENERAL STANDARD FOR PARTS, MATERIALS, AND PROCESSES |
| MIL-DTL-24299 Revision B:2017 | HEATERS, LUBRICATING OIL AND FUEL, ELECTRIC, NAVAL SHIPBOARD |
| MIL-DTL-20064 Revision F:2014 | VALVE, NONFERROUS, FOR USE WITH HALOGENATED REFRIGERANTS |
| MIL V 24624 : 0 | VALVE, BUTTERFLY, WAFER AND LUG STYLE, SHIPBOARD SERVICE |
| MIL-DTL-24800 Base Document:1996 | CLEANING COMPOUND - AQUEOUS - OXYGEN SYSTEMS COMPONENTS |
| DOD-P-24639 Base Document:1984 | PROPELLER, FIXED PITCH, SHIP (METRIC) |
| MIL-DTL-24509 Revision B:2017 | Valves, Flanged, Balland Plugfor Sewageand Seawater Service |
| MIL F 24787/3 : 0 | FITTINGS, END, TYPES C & CL, O-RING SEAL UNION, REUSABLE FOR FLEXIBLE HOSE ASSEMBLIES |
| FF-B-575 Revision C:1970 | BOLTS, HEXAGON AND SQUARE |
| MIL S 1222 : H | STUD, BOLTS, HEX CAP SCREWS, SOCKET HEAD CAP SCREWS AND NUTS |
| MIL-I-24783 Base Document:1993 | ISOLATOR, RING TYPE, PRESSURE, FOR SHIPBOARD SEWAGE SERVICE |
| MIL-F-19700 Revision A:1987 | FASTENERS, SCREW THREADED, AND RELATED ITEMS, NON-MAGNETIC |
| MIL F 24787/2 : 0 | FITTINGS, END, TYPE A, 37 DEGREES FLARE, REUSABLE FOR FLEXIBLE HOSE ASSEMBLIES |
| MIL-G-24659 Revision A:1993 | GAGE, DIFFERENTIAL, DIAL INDICATING |
| MIL-DTL-24231 Revision E:2013 | Connectors, Plugs, Receptacles, Adapters, Hull Inserts, and Hull Insert Plugs, Pressure-Proof, General Specification for |
| MIL-DTL-32408 Base Document:2012 | INTEGRAL MOTOR PUMP (IMP) |
| MIL-B-1083 Revision D:1987 | BALLS, BEARING, FERROUS AND NON-FERROUS (FOR USE IN BEARINGS, VALVES AND BEARING APPLICATIONS) GENERAL SPECIFICATION FOR |
| NASM35338:2014 | WASHER, LOCK-SPRING, HELICAL, REGULAR (MEDIUM) SERIES |
| NASM35338:2013 | WASHER, LOCK-SPRING, HELICAL, REGULAR (MEDIUM) SERIES |
| ASTM F 1508 : 1996 : R2010 | Standard Specification for Angle Style, Pressure Relief Valves for Steam, Gas and Liquid Services |
| MIL-G-18997 Revision E:1991 | GAUGE, PRESSURE, DIAL INDICATING |
| MIL-STD-186 Revision F:2002 | PROTECTIVE FINISHING SYSTEMS FOR ROCKETS, GUIDED MISSILES, SUPPORT EQUIPMENT AND RELATED MATERIALS |
| MIL W 22176 : A NOTICE 1 | WATCH, WRIST, SUBMERSIBLE (4OO-FOOT), NON-MAGNETIC |
| MIL C 19836 : B | COOLER, FLUID, INDUSTRIAL, AIR MOTOR AND GENERATOR, NAVAL SHIPBOARD |
| MIL-DTL-5675 Revision C:2005 | Shackle: Cable, Aircraft |
| MIL V 17547 : A | VALVES, CHECK, BRONZE (NAVY) |
| MIL-V-2042 Revision E:1990 | VALVE, REDUCING, WATER SERVICE, FOR NAVAL SHIPBOARD USE |
| DOD V 24657 : 0 | VALVE, ACTUATOR, DIRECT COUPLED, GEAR DRIVEN ELECTRICALLY POWERED FOR NAVAL SHIPBOARD PROPULSION AND AUXILIARY SYSTEMS (METRIC) |
| DOD-V-24675 Base Document:1986 | VALVES, BOILER BLOW SERVICE, MONEL, SHIPBOARD USE |
| FF-W-84 Revision A:1967 | WASHER, LOCK (SPRING) |
| ASTM F 1370 : 1992 | Standard Specification for Pressure-Reducing Valves for Water Systems, Shipboard |
| FF-N-836 Revision E:1994 | Nut: Square, Hexagon, Cap, Slotted, Castle, Knurled, Welding and Single Ball Seat |
| SAE J 2271M : 2015 | SHIP SYSTEMS AND EQUIPMENT - PART STANDARD FOR STUDS - CONTINUOUS AND DOUBLE END (METRIC) |
| MS35338 Revision L:1994 | WASHER, LOCK SPRING, HELICAL, REGULAR (MEDIUM) SERIES |
| DOD HDBK 270 : 0 | METALLIC MATERIALS, MAGNETIC PERMEABILITY AND ELECTRICAL CONDUCTIVITY, CHARACTERISTICS OF (METRIC) |
| MIL-HDBK-270 Revision A:1991 | METALLIC MATERIALS FOR LOW MAGNETIC APPLICATIONS, MAGNETIC PERMEABILITY AND ELECTRICAL CONDUCTIVITY, CHARACTERISTICS OF (METRIC) |
| MIL STD 2189/243 1 : NOTICE 1 | DESIGN METHODS FOR NAVAL SHIPBOARD SYSTEMS: PROPULSION SHAFTING |
| MIL-T-19646 Revision A:1990 | THERMOMETER, REMOTE READING, SELF-INDICATING DIAL, GAS ACTUATED |
| MIL-DTL-17840 Revision D:2018 | PUMPS, CENTRIFUGAL, CLOSE-COUPLED, NAVY STANDARD (FOR SURFACE SHIP APPLICATION) |
| ASTM F 1370 : 1992 : R2011 | Standard Specification for Pressure-Reducing Valves for Water Systems, Shipboard |
| ASTM F 1387 : 1999 : R2012 | Standard Specification for Performance of Piping and Tubing Mechanically Attached Fittings |
| ASTM F 1387 : 1999 : R2005 | Standard Specification for Performance of Piping and Tubing Mechanically Attached Fittings |
| ASTM F 1508 : 1996 : R2004 | Standard Specification for Angle Style, Pressure Relief Valves for Steam, Gas and Liquid Services |
| ASTM F 1508 : 1996 | Standard Specification for Angle Style, Pressure Relief Valves for Steam, Gas and Liquid Services |
| MIL V 23953 : C | VALVE, COMBINED VENT-CHECK FOR SUBMARINE MBT BLOW LINES (SIZES 1-1/2 TO 2-1/2 INCHES) |
| MIL-B-18558 Revision B:1988 | Bearing, Propulsion Line Shaft, Oil Disc Lubricated |
| MIL V 24509 : A | VALVES, FLANGED, BALL & PLUG FOR SEWAGE & SEA WATER SERVICE |
| MIL-DTL-1189 Revision E:2018 | VALVE, GATE, BRONZE |
| MIL F 24787/6 : 0 | FITTINGS, END TYPE U, 180 DEGREES RETURN, HOSE TO HOSE, REUSABLE FOR FLEXIBLE HOSE ASSEMBLIES |
| ASTM F 1370 : 1992 : R2005 | Standard Specification for Pressure-Reducing Valves for Water Systems, Shipboard |
| SAE J 2295 : 2016 | FASTENER PART STANDARD - CAP SCREWS, HEX, HEAVY HEX AND HEAVY HEX STRUCTURAL BOLTS, AND HEX NUTS (INCH DIMENSIONED) |
| MIL-STD-777 Revision F:2012 | SCHEDULE OF PIPING, VALVES, FITTINGS, AND ASSOCIATED PIPING COMPONENTS FOR NAVAL SURFACE SHIPS |
| ASTM F 1508 : 1996 : R2016 : EDT 1 | Standard Specification for Angle Style, Pressure Relief Valves for Steam, Gas, and Liquid Services |
| ASM E B18.21.1 : 2009 | WASHERS: HELICAL SPRING-LOCK, TOOTH LOCK, AND PLAIN WASHERS (INCH SERIES) |
| ASME B18.21.2M : 1999(R2014) | LOCK WASHERS (METRIC SERIES) |
| ASME B18.21.2M:1999 | LOCK WASHERS (METRIC SERIES) |
| ASME B18.21.2M : 1999(R2005) | LOCK WASHERS (METRIC SERIES) |
| ASME B18.21.1 : 2009 : R2016 | WASHERS: HELICAL SPRING-LOCK, TOOTH LOCK, AND PLAIN WASHERS (INCH SERIES) |
| MIL-STD-271 Revision F:1986 | REQUIREMENTS FOR NONDESTRUCTIVE TESTING METHODS |
| ASTM E 10 : 2017-05 | TEST METHOD FOR BRINELL HARDNESS OF METALLIC MATERIALS |
| MIL-STD-163 Revision C:1978 | STEEL MILL PRODUCTS PREPARATION FOR SHIPMENT AND STORAGE |
| ASTM E 8 : 2004 | Standard Test Methods for Tension Testing of Metallic Materials |
| MIL-STD-105 Revision E:1989 | SAMPLING PROCEDURES AND TABLES FOR INSPECTION BY ATTRIBUTES |
| FED-STD-182 Revision B:1977 | CONTINUOUS IDENTIFICATION MARKING OF NICKEL AND NICKEL BASE ALLOYS |
US$20.00
Excluding Tax where applicable
USD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
PDF - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.