PLATING, ELECTROLESS NICKEL

Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

01-01-2013

Publisher

SAE International

This specification covers the requirements for electroless nickel deposited on various materials.

Committee	AMS B
DocumentType	Standard
Pages	9
PublisherName	SAE International
Status	NA
SupersededBy	SAE AMS 2404 : 2017
Supersedes	SAE AMS 2404 : 2008

DSCC 04028 : 0	CONNECTOR, HIGH DENSITY, BLADE AND FORK, BACKPANEL, EIGHT ROW, 452 CONTACT POSITIONS
DSCC 93006 : B	CONNECTOR, HIGH DENSITY, BLADE AND FORK, DAUGHTER BOARD, EIGHT ROW, 296 CONTACT, 2 POWER POSITIONS
DSCC 93007 : B	CONNECTOR, HIGH DENSITY, BLADE AND FORK, BACKPANEL, EIGHT ROW, 296 CONTACT POSITIONS
MIL-DTL-23971 Revision E:2017	POWER DIVIDERS, POWER COMBINERS, AND POWER DIVIDER/COMBINERS, GENERAL SPECIFICATION FOR
MIL-DTL-5002 Revision E:2011	SURFACE TREATMENTS AND INORGANIC COATINGS FOR METAL SURFACES OF WEAPONS SYSTEMS
NASA PRC 5007 : 2012	PROCESS SPECIFICATION FOR ELECTROLESS NICKEL PLATING
MIL-DTL-22992 Revision H:2015	Connectors, Plugsand Receptacles, Electrical, Waterproof, Quick Disconnect, Heavy Duty Type, General Specification for
SAE AS 81511 : 2016	CONNECTORS, ELECTRICAL, CIRCULAR, HIGH DENSITY, QUICK DISCONNECT, ENVIRONMENT RESISTING AND ACCESSORIES, GENERAL SPECIFICATION FOR
SAE AS 4775 : 2017	AIRCRAFT MAINTENANCE JACKS - GENERAL REQUIREMENTS
MIL-DTL-39030 Revision F:2014	DUMMY LOADS, ELECTRICAL, COAXIAL AND STRIPLINE, GENERAL SPECIFICATION FOR
DSCC 93012 : B	CONNECTOR, HIGH DENSITY, BLADE AND FORK, DAUGHTER BOARD, EIGHT ROW, 280 CONTACT, 2 POWER POSITIONS
AWS C3.5 : 1999	SPECIFICATION FOR INDUCTION BRAZING
AWS C3.4M/C3.4 : 2016	SPECIFICATION FOR TORCH BRAZING
DSCC 93002 : B	CONNECTOR, HIGH DENSITY, BLADE AND FORK, DAUGHTER BOARD, EIGHT ROW, 372 CONTACT POSITIONS
SAE AS 12500 : 2018	CORROSION PREVENTION AND DETERIORATION CONTROL IN ELECTRONIC COMPONENTS AND ASSEMBLIES
MIL-DTL-83513 Revision G:2008	Connectors, Electrical, Rectangular, Microminiature, Polarized Shell, General Specification for
MIL-DTL-14072 Revision F:2013	FINISHES FOR GROUND BASED ELECTRONIC EQUIPMENT
MIL PRF 83513 : D	CONNECTORS, ELECTRICAL, RECTANGULAR, MICROMINIATURE, POLARIZED SHELL, GENERAL SPECIFICATION FOR
MIL-STD-1678-1 Revision D:2016	FIBER OPTIC CABLING SYSTEMS REQUIREMENTS AND MEASUREMENTS - PART 1: DESIGN, INSTALLATION AND MAINTENANCE REQUIREMENTS (PART 1 OF 6 PARTS)
MIL-DTL-32139 Revision B:2017	Connectors, Electrical, Rectangular, Nanominiature, Polarized Shell, General Specification for
MIL-DTL-5523 Revision E:2011	VALVE; RELIEF, HYDRAULIC PRESSURE
A-A-59590 Revision D:2014	HOLDER, ELECTRICAL CARD, WEDGE RETAINERS, 3 PIECE, FOR COLD PLATE APPLICATIONS, GENERAL REQUIREMENTS FOR
MIL-DTL-3933 Revision L:2014	Attenuators, Fixed, Space Level, Non-Space Level General Specification for
DSCC 02007 : A	CONNECTOR, HIGH DENSITY, BLADE AND FORK, BACKPANEL, EIGHT ROW, 396 CONTACT POSITIONS
DSCC 89017 : D	CONNECTOR ACCESSORIES, ELECTRICAL, ADAPTER, SHRINK BOOT, RFI/EMI, 45 DEGREES, CATEGORY 3C, FOR MIL-DTL-83723 SERIES 3, SAE-AS50151 (SAE-AS34001 AND AS34501), SAE-AS81703 SERIES 3, AND MIL-DTL-26482 SERIES 2
MIL-STD-1250 Revision A:1992	CORROSION PREVENTION AND DETERIORATION CONTROL IN ELECTRONIC COMPONENTS AND ASSEMBLIES
MIL-DTL-28837 Revision D:2015	MIXER STAGES, RADIO FREQUENCY GENERAL SPECIFICATION FOR
DSCC 04027 : A	CONNECTOR, HIGH DENSITY, BLADE AND FORK, DAUGHTER BOARD, EIGHT ROWS, 452 CONTACT POSITIONS
MIL-HDBK-1250 Revision A:1995	CORROSION PREVENTION AND DETERIORATION CONTROL IN ELECTRONIC COMPONENTS AND ASSEMBLIES
MIL-STD-1516 Revision B:1990	UNIFIED CODE FOR COATINGS AND FINISHES FOR DOD MATERIAL
DSCC 93005 : B	CONNECTOR, HIGH DENSITY, BLADE AND FORK, BACKPANEL, EIGHT ROW, 300 CONTACT, 8 FIBER OPTIC POSITIONS
SAE AS 81659 : 2017	CONNECTORS, ELECTRICAL, RECTANGULAR CRIMP CONTACTS, GENERAL SPECIFICATION FOR
AWS C3.4 : 1999	SPECIFICATION FOR TORCH BRAZING
AWS C3.6 : 1999	SPECIFICATION FOR FURNACE BRAZING
MIL-DTL-15370 Revision K:2015	COUPLERS, DIRECTIONAL, GENERAL SPECIFICATION FOR
MIL-DTL-55302-122 Revision B:2004	CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, PIN CONTACTS, 184 CONTACT POSITIONS, FOR PRINTED WIRING BOARDS (.050 INCH SPACING)
MIL-DTL-3928 Revision H:2016	SWITCHES, RADIO-FREQUENCY TRANSMISSION LINE, (COAXIAL AND MICROSTRIP), GENERAL SPECIFICATION FOR
MIL-DTL-23971-5 Revision D:2013	POWER DIVIDERS, N-WAY, O DEGREES, FLAT PACK
MIL-DTL-32234 Base Document:2007	CONNECTORS, ELECTRICAL, ULTRA HIGH DENSITY, MODULAR, BLADE AND FORK, EIGHT ROW, GENERAL SPECIFICATION FOR
SAE AS 4941 : 2015	AEROSPACE - GENERAL REQUIREMENTS FOR COMMERCIAL AIRCRAFT HYDRAULIC COMPONENTS
DSCC 93004 : B	CONNECTOR, HIGH DENSITY, BLADE AND FORK, DAUGHTER BOARD, EIGHT ROW, 300 CONTACT, 8 FIBER OPTIC POSITIONS
DSCC 93013 : B	CONNECTOR, HIGH DENSITY, BLADE AND FORK, BACKPANEL, EIGHT ROW, 280 CONTACT, 2 POWER POSITIONS, WITH SAFETY GROUND
A-A-55563 Revision D:2013	Holder, Electrical Card, Metal Card Guide, General Requirements for
MIL-DTL-55181 Revision F:2012	CONNECTORS, PLUG AND RECEPTACLE, INTERMEDIATE POWER (ELECTRICAL, WATERPROOF), TYPE MW, GENERAL SPECIFICATION FOR
DSCC 93011 : B	CONNECTOR, HIGH DENSITY, BLADE AND FORK, BACKPANEL, EIGHT ROW, 284 CONTACT, 8 FIBER OPTIC AND SAFETY GROUND
SAE AS 19692 : 2016	Aerospace – Military Type Variable Delivery, Pressure Compensated Hydraulic Pump
NASA STD 5005 : 2013	STANDARD FOR THE DESIGN AND FABRICATION OF GROUND SUPPORT EQUIPMENT
NASA KSC DE 512-SM : 2012	FACILITY SYSTEMS, GROUND SUPPORT SYSTEMS, AND GROUND SUPPORT EQUIPMENT GENERAL DESIGN REQUIREMENTS
NASA STD 6016 : 2016	STANDARD MATERIALS AND PROCESSES REQUIREMENTS FOR SPACECRAFT
NASA JSC 27301 : 2009	MATERIALS AND PROCESSES SELECTION, CONTROL, AND IMPLEMENTATION PLAN FOR JSC FLIGHT HARDWARE
NASA MSFC HDBK 3697 : 2014	ELECTRICAL BONDING DESIGN GUIDE HANDBOOK
AWS C3.6M/C3.6 : 2016	SPECIFICATION FOR FURNACE BRAZING
MIL-DTL-83723 Revision H:2016	CONNECTORS, ELECTRICAL, CIRCULAR, ENVIRONMENT RESISTING AND HERMETICALLY SEALED, RECEPTACLES AND PLUGS, GENERAL SPECIFICATION FOR
MIL-DTL-24308 Revision G:2009	Connectors, Electric, Rectangular, Nonenvironmental, Miniature, Polarized Shell, Rack and Panel, General Specification for
DSCC 03023 : A	CONNECTOR, HIGH DENSITY, BLADE AND FORK, DAUGHTER BOARD, EIGHT ROW, 396 CONTACT POSITIONS
MIL-DTL-83733 Revision E:2006	CONNECTORS, ELECTRICAL MINIATURE, RECTANGULAR TYPE, RACK TO PANEL, ENVIRONMENT RESISTING, 200 DEGREES C TOTAL CONTINUOUS OPERATING TEMPERATURE, GENERAL SPECIFICATION FOR
MIL-STD-1276 Revision H:2013	Leads for Electronic Component Parts
DSCC 93009 : B	CONNECTOR, HIGH DENSITY, BLADE AND FORK, BACKPANEL, EIGHT ROW, 356 CONTACT, WITH SAFETY GROUND
AWS C3.11M/C3.11:2011	SPECIFICATION FOR TORCH SOLDERING
ASTM B 656 : 1991	Standard Guide for Autocatalytic (Electroless) Nickel-Phosphorus Deposition on Metals for Engineering Use (Withdrawn 2000)
MIL-DTL-7793 Revision H:2016	METER, TIME TOTALIZING
SAE AS 85049 : 2016	CONNECTOR ACCESSORIES, ELECTRICAL GENERAL SPECIFICATION FOR
AWS C3.9M/C3.9 : 2009	SPECIFICATION FOR RESISTANCE BRAZING
DSCC 93010 : B	CONNECTOR, HIGH DENSITY, BLADE AND FORK, DAUGHTER BOARD, EIGHT ROW, 284 CONTACT, 8 FIBER OPTIC AND SAFETY GROUND
MIL-STD-2193 Revision C:2012	Ship Hydraulic System Components
MIL-DTL-28754-67 Revision A:2016	CONNECTORS, ELECTRICAL, MODULAR, CONNECTOR FRAME, TYPE 4, DOUBLE SPAN, CENTER
DSCC 93003 : C	CONNECTOR, HIGH DENSITY, BLADE AND FORK, BACKPANEL, EIGHT ROW, 372 CONTACT POSITIONS
MIL-DTL-28754-70 Revision A:2015	CONNECTORS, ELECTRICAL, MODULAR, CONNECTOR FRAME, TYPE 4, SINGLE SPAN, CENTER
MIL-DTL-28754-68 Revision A:2015	CONNECTORS, ELECTRICAL, MODULAR, CONNECTOR FRAME, TYPE 4, DOUBLE SPAN, T-DIP
MIL-DTL-28875 Revision C:2012	Amplifiers, Radio-Frequency and Microwave, Solid-State, General Specification for
DSCC 89015 : E	CONNECTOR ACCESSORIES, ELECTRICAL, ADAPTER, SHRINK BOOT, RFI/EMI, 45 DEGREE, CATEGORY 3C (FOR MIL-DTL-38999 SERIES 1 AND 2)
AWS C3.5M/C3.5 : 2016	SPECIFICATION FOR INDUCTION BRAZING
DSCC 93008 : B	CONNECTOR, HIGH DENSITY, BLADE AND FORK, DAUGHTER BOARD, EIGHT ROW, 356 CONTACT, WITH SAFETY GROUND