|
SAE AMS 5934/H1000 : 2015
|
STEEL, EXTRA HIGH TOUGHNESS, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, RINGS, AND EXTRUSIONS 13CR - 8.0NI - 2.2MO - 1.1AL VACUUM INDUCTION PLUS CONSUMABLE ELECTRODE MELTED SOLUTION HEAT TREATED, PRECIPITATION HARDENED (H1000)
|
|
SAE AS 1576 : 2016
|
FITTINGS, WELDED, HYDRAULIC, TITANIUM, CORROSION RESISTANT STEEL AND NICKEL, 3000 PSI HYDRAULIC
|
|
MIL-H-6875 Revision H:1989
|
HEAT TREATMENT OF STEEL RAW MATERIALS
|
|
SAE MA 4368 : 2018
|
NUT, PLAIN ROUND - SPANNER WRENCHING, SHAFT MOUNTED, UNS S66286, PROCUREMENT SPECIFICATION FOR, METRIC
|
|
SAE AS 4891 : 1999
|
STUD, LOCKED IN, KEY LOCKED, UNS S66286, CLASSIFICATION: 140 KSI PROCUREMENT SPECIFICATION FOR
|
|
SAE MA 3399 : 2012
|
CLAMP - TUBE SUPPORT, SPRING CLIPS AND PTFE CUSHION PROCUREMENT SPECIFICATION FOR
|
|
SAE AS 7481:1996(S2015)
|
STUDS, STEEL, UNS S66286 AGED AFTER ROLL THREADED PROCUREMENT SPECIFICATION FOR
|
|
SAE AS 7474 : 2018
|
BOLTS AND SCREWS, STEEL, CORROSION RESISTANT, UNS S17400 TENSILE STRENGTH 140 KSI PROCUREMENT SPECIFICATION
|
|
SAE AS 18280 : 2017
|
FITTINGS, 24 DEGREES CONE FLARELESS, FLUID CONNECTION, 3000 PSI
|
|
SAE AMS 5643/H1100 : 2014
|
STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, TUBING AND RINGS 16CR - 4.0NI - 0.30CB (NB) - 4.0CU, SOLUTION AND PRECIPITATION HEAT TREATED (H1100)
|
|
SAE AMS 2759 : 2014
|
HEAT TREATMENT OF STEEL PARTS, GENERAL REQUIREMENTS
|
|
SAE AS 7479 : 2013
|
BOLTS AND SCREWS, STEEL, UNS S66286, 1650 DEGREES F SOLUTION HEAT TREATED, PRECIPITATION HEAT TREATED BEFORE ROLL THREADED
|
|
SAE MA 3375 : 2011
|
STUDS, CORROSION AND HEAT RESISTANT STEEL, UNS S66286 TENSILE STRENGTH 900 MPA, PROCUREMENT SPECIFICATION, METRIC, FSC 5307
|
|
SAE AS 5887 : 2014
|
INSERT, SCREW THREAD, SELF-LOCKING, UNS S66286, LOCKED IN, KEY LOCKED PROCUREMENT SPECIFICATION FOR
|
|
SAE AS 4726 : 2017
|
NUTS, SELF-LOCKING, UNS S66286 CLASSIFICATION: 220 KSI/850 DEGREE F PROCUREMENT SPECIFICATION
|
|
SAE AMS 5643/H1025 : 2014
|
STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, TUBING AND RINGS, 16CR - 4.0NI - 0.30CB (NB) - 4.0CU, SOLUTION AND PRECIPITATION HEAT TREATED (H1025)
|
|
SAE AMS 5659/H1025 : 2013
|
STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, RINGS, AND EXTRUSIONS, 15CR - 4.5NI - 0.30CB (NB) - 3.5CU, CONSUMABLE REMELTED, SOLUTION AND PRECIPITATION HEAT TREATED (H1025)
|
|
SAE AMS 5643/H1150 : 2013
|
STEEL, CORROSION RESISTANT, BARS, WIRE, FORGINGS, TUBING AND RINGS, 16CR - 4.0NI - 0.30CB (NB) - 4.0CU, SOLUTION AND PRECIPITATION HEAT TREATED (H1150)
|
|
NASA STD 5005(INT) : 2007
|
THE DESIGN AND FABRICATION OF GROUND SUPPORT EQUIPMENT
|
|
SAE AMS 5629/H1000 : 2015
|
STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, RINGS, AND EXTRUSIONS, 13CR - 8.0NI - 2.2MO - 1.1AL, VACUUM INDUCTION PLUS CONSUMABLE ELECTRODE MELTED, SOLUTION HEAT TREATED, PRECIPITATION HARDENED (H1000)
|
|
SAE AS 7478 : 2017
|
BOLTS AND SCREWS, STEEL, UNS S66286, CLASSIFICATION: 130 KSI/1200 DEGREES F, 1800 DEGREES F SOLUTION HEAT TREATED, AGED AFTER ROLL THREADED, PROCUREMENT SPECIFICATION FOR
|
|
SAE AMS 5622/H1025 : 2015
|
STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS 16CR - 4.0NI - 0.30CB - 4.0CU SOLUTION HEAT TREATED, PRECIPITATION HARDENED (H1025) CONSUMABLE ELECTRODE REMELTED
|
|
SAE AS 4976 : 2012
|
Insert, Screw Thread, Non-Locking, UNS S66286, Locked in, Key Locked, Procurement Specification for(STABILIZED Mar 2019)
|
|
SAE AS 4959 : 2018
|
BOLTS AND SCREWS, STEEL, UNS S66286 TENSILE STRENGTH 140 KSI 1650 DEGREES F SOLUTION HEAT TREATMENT AGED BEFORE FILLET AND THREAD ROLLING PROCUREMENT SPECIFICATION
|
|
SAE AS 7482 : 2015
|
STUDS, CORROSION AND HEAT RESISTANT STEEL, UNS S66286, TENSILE STRENGTH 130 KSI, 1800 DEGREES F SOLUTION HEAT TREATED, AGED BEFORE ROLL THREADING PROCUREMENT SPECIFICATION
|
|
SAE AS 7477 : 2017
|
BOLTS AND SCREWS, STEEL, UNS S66286 TENSILE STRENGTH 130 KSI, PROCUREMENT SPECIFICATION
|
|
SAE AS 4892 : 2012
|
INSERT, SCREW THREAD, SELF-LOCKING, UNS S66286, LOCKED IN, KEY LOCKED, PROCUREMENT SPECIFICATION FOR
|
|
MIL-PRF-32587 Base Document:2018
|
Remover, Paint, Hap-Free, Neutral
|
|
SAE AS 5377 : 2000
|
NUT, SELF-LOCKING, 0.7500 THRU 1.5000 THREAD SIZES, UNS S66286, 160,000 PSI, 800 DEGREE F, UNJ THREAD - PROCUREMENT SPECIFICATION
|
|
SAE AS 4393 : 2015
|
NUT, SELF-LOCKING, UNS S66286, 1200 DEGREES F, 160,000 PSI, UNJ THREAD
|
|
SAE MA 3374 : 2012
|
BOLTS AND SCREWS, UNS S66286, CORROSION AND HEAT RESISTANT STEEL, PROCUREMENT SPECIFICATION, METRIC
|
Important note : All end users must be registered with an Account prior to user licenses being assigned.