SAE AMS 2806D : 2013
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
IDENTIFICATION BARS, WIRE, MECHANICAL TUBING, AND EXTRUSIONS, CARBON AND ALLOY STEELS AND CORROSION AND HEAT-RESISTANT STEELS AND ALLOYS
Available format(s)
Hardcopy , PDF
Superseded date
08-08-2020
Language(s)
English
Published date
01-01-2013
Publisher
1 SCOPE
2 APPLICABLE DOCUMENTS
3 TECHNICAL REQUIREMENTS
4 QUALITY ASSURANCE PROVISIONS
5 PREPARATION FOR DELIVERY
6 ACKNOWLEDGMENT
7 REJECTIONS
8 NOTES
This specification covers procedures for identifying bars, wire, mechanical tubing, and extrusions of carbon and alloy steels and corrosion and heat-resistant steels and alloys.
| Committee |
AMS B
|
| DevelopmentNote |
Together with SAE AMS 2807 supersedes SAE AMS STD 182 (04/2003) Supersedes FED STD 182 (B) and FED STD 183 (C). (08/2005)
|
| DocumentType |
Standard
|
| Pages |
3
|
| PublisherName |
SAE International
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| SAE AMS 5925 : 2012 | STEEL, CORROSION -RESISTANT, BARS, WIRE, AND FORGINGS, 15.5CR - 1.8MO - 0.20N (0.37 - 0.45C), ELECTROSLAG REMELTED |
| SAE AMS 5697 : 2018 | STEEL, CORROSION-RESISTANT, WIRE, 19CR - 9.5NI (304), SOLUTION HEAT TREATED |
| SAE AMS 7713 : 2016 | IRON, ELECTRICAL, BAR AND STRIP, COLD FINISHED, ANNEALED |
| MIL-DTL-32477 Base Document:2013 | Rod and Bar, Cobalt-Nickel-Chromium-Iron-Molybdenum Alloy, for use in Critical Seawater Applications |
| SAE AMS 6260S : 2016 | STEEL, BARS, FORGINGS, AND TUBING, 1.2CR - 3.2NI - 0.12MO (0.07 - 0.13C) (9310) |
| SAE AMS 6263 : 2016 | STEEL BARS, FORGINGS, AND TUBING, 1.2CR - 3.2NI - 0.12MO (0.11 - 0.17C) (9315) |
| SAE AMS 5747 : 2012 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 72NI - 15.5CR - 0.95CB(NB) - 2.5TI - 0.70AL - 7.0FE, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE |
| SAE AMS 5070 : 2016 | STEEL, BARS AND FORGINGS, 0.18 - 0.23C (SAE 1022) |
| SAE AMS 5843 : 2016 | COBALT-NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS 19CR - 36CO - 25NI - 7.0MO - 0.50CB (NB) - 2.9TI - 0.20AL - 9.0FE VACUUM INDUCTION PLUS VACUUM CONSUMABLE ELECTRODE MELTED SOLUTION HEAT TREATED, WORK STRENGTHENED, AND AGED |
| SAE AMS 5937 : 2012 | STEEL, CORROSION-RESISTANT, BARS, WIRE, AND FORGINGS, 12CR - 11NI - 2MO - 1.5AL - 0.3TI, VACUUM INDUCTION PLUS VACUUM CONSUMABLE ELECTRODE MELTED, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE |
| SAE AMS 6330 : 2017 | STEEL BARS, FORGINGS, AND TUBING, 0.65CR - 1.25NI (0.33 - 0.38C) |
| SAE AMS 5935 : 2016 | STEEL, CORROSION-RESISTANT, BARS, WIRE, AND FORGINGS, 12CR - 10NI - 2MO - 0.9AL - 0.3TI, VACUUM INDUCTION PLUS VACUUM CONSUMABLE ELECTRODE MELTED SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE |
| SAE AMS 5645 : 2016 | STEEL, CORROSION AND HEAT RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 18CR - 10NI - 0.40TI (321), SOLUTION HEAT TREATED |
| SAE MAM 6304 : 1994 | LOW-ALLOY STEEL, HEAT-RESISTANT, BARS, FORGINGS, AND TUBING, 0.95CR - 0.55MO - 0.30V (0.40 - 0.50C) |
| SAE AMS 5663 : 2016 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS 52.5NI - 19CR - 3.0MO - 5.1CB (NB) - 0.90TI - 0.50AL - 18FE CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED 1775 DEGREES F (968 DEGREES C) SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 6527 : 2018 | STEEL, BARS AND FORGINGS, 2.0CR - 10NI - 14CO - 1.0MO (0.15 - 0.19C), VACUUM MELTED, NORMALIZED AND OVERAGED |
| SAE AMS 5625 : 2018 | STEEL BARS, HIGH EXPANSION, 9.5NI - 5.5MN (0.55 - 0.65C), COLD FINISHED |
| SAE AMS 5732 : 2012 | STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING AND RINGS, 15CR - 25.5NI - 1.2MO - 2.1TI - 0.006B - 0.30V, CONSUMABLE ELECTRODE MELTED 1800 DEGREES F (982 DEGREES C), SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS6328N : 2017 | STEEL, BARS, FORGINGS, AND TUBING, 0.50CR - 0.55NI - 0.25MO (0.48 TO 0.53C) (SAE 8750) |
| SAE AMS 7913 : 2015 | ALUMINUM-BERYLLIUM ALLOY, SHEET AND PLATE, 38AL - 62BE |
| SAE AMS 6274 : 2016 | STEEL BARS, FORGINGS AND TUBING, 0.50CR - 0.55NI - 0.20MO (0.18 - 0.23C) (SAE 8620) |
| SAE AMS 5731 : 2012 | STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 15CR - 25.5NI - 1.2MO - 2.1TI - 0.006B - 0.30V, CONSUMABLE ELECTRODE MELTED, 1800 DEGREES F (982 DEGREES C) SOLUTION HEAT TREATED |
| SAE AMS 5653 : 2012 | STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 17CR - 12NI - 2.5MO (0.030 MAX C) (316L), SOLUTION HEAT TREATED |
| SAE AMS 5622 : 2013 | STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 16CR - 4.0NI - 0.30CB - 4.0CU, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE, CONSUMABLE ELECTRODE REMELTED |
| SAE AMS 6257 : 2016 | STEEL BARS, FORGINGS, AND TUBING, 1.6SI - 0.82CR - 1.8NI - 0.40MO - 0.08V (0.40 - 0.44C), CONSUMABLE ELECTRODE VACUUM REMELTED, NORMALIZED AND TEMPERED |
| SAE AMS 6539 : 2013 | STEEL BARS, FORGINGS, AND TUBING, 1.7CR - 3.8NI - 0.3MO - (0.32-0.38 C), AIRCRAFT-QUALITY |
| SAE AMS5624F:1989(S2017) | Steel Bars, High Expansion 4.5Mn - 4.0Cr - 12.5Ni (0.50 - 0.60C) Cold Finished(STABILIZED Apr 2017) |
| SAE AMS 5853 : 2012 | STEEL, CORROSION AND HEAT-RESISTANT, BARS AND WIRE, 15CR - 25.5NI - 1.2MO - 2.1TI - 0.006B - 0.30V, CONSUMABLE ELECTRODE MELTED 1800 DEGREES F (982 DEGREES C) SOLUTION TREATED AND WORK-STRENGTHENED, 160 KSI (1103 MPA) TENSILE STRENGTH |
| SAE AMS 6519 : 2014 | STEEL, MARAGING, BARS, FORGINGS, TUBING, AND RINGS 19NI - 3.0MO - 1.4TI - 0.10AL PREMIUM AIRCRAFT QUALITY DOUBLE VACUUM MELTED, ANNEALED |
| SAE AMS4675E : 2017 | NICKEL-COPPER ALLOY, CORROSION-RESISTANT, BARS AND FORGINGS, 67NI - 30CU |
| SAE AMS 7908 : 2015 | BERYLLIUM NEAR-NET PREFORMS, STANDARD GRADE, HOT ISOSTATIC PRESSED |
| SAE AMS 6282 : 2015 | STEEL TUBING, MECHANICAL, 0.50CR - 0.55NI - 0.25MO (0.33 - 0.38C) (SAE 8735) |
| SAE AMS 5764 : 2014 | STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, EXTRUSIONS, AND RINGS 5.0MN - 22CR - 12.5NI - 2.2MO - 0.20CB - 0.30N - 0.20V SOLUTION HEAT TREATED |
| SAE AMS 5674 : 2012 | STEEL, CORROSION AND HEAT RESISTANT, WIRE 18CR - 11.5NI - 0.70 CB (SAE 30347) SOLUTION HEAT TREATED |
| SAE AMS 5010 : 2014 | STEEL BARS FREE-MACHINING COLD DRAWN (SAE 1212 OR SAE 1215) |
| SAE AMS 5024 : 2015 | STEEL, BARS, FORGINGS, AND TUBING, FREE-CUTTING, 1.5MN (0.32 - 0.39C) (SAE 1137) |
| SAE AMS 5834 : 2014 | COBALT ALLOY, CORROSION AND HEAT-RESISTANT, ROUND WIRE 20CR - 15NI - 40CO - 7.0MO - 16FE VACUUM INDUCTION PLUS CONSUMABLE ELECTRODE MELTED SOLUTION HEAT TREATED, COLD DRAWN, AND AGED |
| SAE AMS 6516 : 2017 | STEEL, BARS AND FORGINGS 1CR - 10NI - 7CO - 2MO - 1.3W - 0.1V - (0.28 - 0.32C) VACUUM INDUCTION MELTED, VACUUM ARC REMELTED, NORMALIZED AND ANNEALED PRECIPITATION HARDENABLE |
| SAE AMS 7910 : 2015 | BERYLLIUM NEAR-NET PREFORMS, STANDARD GRADE, COLD ISOSTATIC PRESSED, SINTERED |
| SAE AMS 5646 : 2014 | STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 18CR - 11NI - 0.60CB(NB) (347), SOLUTION HEAT TREATED |
| SAE AMS 5842 : 2016 | COBALT-NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS 19CR - 36CO - 25NI - 7.0MO - 0.50CB (NB) - 2.9TI - 0.20AL - 9.0FE VACUUM INDUCTION PLUS VACUUM CONSUMABLE ELECTRODE MELTED SOLUTION HEAT TREATED AND WORK STRENGTHENED |
| SAE AMS 5665 : 2012 | NICKEL ALLOY, CORROSION AND HEAT RESISTANT, BARS, FORGINGS, AND RINGS, 74NI - 15.5CR - 8.0FE |
| SAE AMS 6528 : 2017 | STEEL, BARS, 0.95CR - 0.20MO (0.28 - 0.33C) (SAE 4130), SPECIAL AIRCRAFT QUALITY CLEANLINESS, NORMALIZED |
| SAE AMS 6471 : 2014 | STEEL, NITRIDING, BARS, FORGINGS, AND TUBING 1.6CR - 0.35MO - 1.13AL (0.38 - 0.43C) (135 MOD) CONSUMABLE ELECTRODE VACUUM MELTED |
| SAE AMS 5886 : 2014 | ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS 50NI - 20CR - 20CO - 5.8MO - 2.2TI - 0.45AL CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED 2100 DEGREES F (1149 DEGREES C) SOLUTION HEAT TREATED |
| SAE AMS 5771 : 2014 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 74NI - 7.0CR - 16.5 MO, SOLUTION HEAT TREATED |
| SAE AMS 7902 : 2015 | BERYLLIUM SHEET AND PLATE, 98BE |
| SAE AMS 5955 : 2016 | STEEL, CORROSION-RESISTANT, BARS, WIRE, AND FORGINGS 10CR - 12NI - 2MO - 1.45AL - 1.15TI VACUUM INDUCTION PLUS VACUUM CONSUMABLE ELECTRODE MELTED SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE |
| SAE AMS 5734 : 2012 | STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, AND TUBING, 15CR - 25.5NI - 1.2MO - 2.1TI - 0.006B - 0.30V, CONSUMABLE ELECTRODE MELTED, 1650 DEGREES F (899 DEGREES C) SOLUTION HEAT TREATED |
| SAE AMS 6443 : 1988 | STEEL BARS, FORGINGS, AND TUBING - 1.0CR (0.98-1.10C) (SAE 51100) CONSUMABLE ELECTRODE VACUUM MELTED |
| SAE AMS 5706 : 2015 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 57NI - 19.5CR - 13.5CO - 4.3MO - 3.0TI - 1.4AL - 0.006B - 0.05ZR, CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED, 1825 TO 1900 DEGREES F SOLUTION HEAT TREATED |
| SAE AMS 5631 : 2018 | STEEL, CORROSION-RESISTANT, BARS AND FORGINGS, 17CR (0.60 - 0.75C) (440A) |
| SAE AMS 5628 : 2015 | STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, AND TUBING, 16CR - 2.5NI (SAE 51431) |
| SAE AMS 7907D : 2015(R2018) | BERYLLIUM BARS, RODS, TUBING, AND SHAPES, INSTRUMENT GRADE |
| SAE AMS 5643 : 2018 | STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, MECHANICAL TUBING, AND RINGS, 16CR - 4.0NI - 0.30CB (NB) - 4.0CU, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE |
| SAE AMS 6558 : 2013 | STEEL, BARS, WIRE, AND FORGINGS 10.5MO - 6W - 3.75CR - 2V (1.25 - 1.40C) POWDER METALLURGY PRODUCT HOT ISOSTATICALLY PRESSED |
| SAE AMS 5923 : 2013 | STEEL, CORROSION-RESISTANT, BARS, WIRE, AND FORGINGS,17CR - 0.52MO (0.95 - 1.20C) (SAE 51440C), FOR BEARING APPLICATIONS |
| SAE AMS 5667 : 2015 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS 72NI - 15.5CR - 0.95CB - 2.5TI - 0.70AL - 7.0FE EQUALIZED, PRECIPITATION HARDENABLE |
| SAE AMS 5940 : 2014 | ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS 34CO - 3.0CR - 28NI - 3.0CB(NB) - 5.5AL - 0.008B - 25.5FE MULTIPLE MELTED, HIGH TEMPERATURE, OXIDATION-RESISTANT, LOW EXPANSION SOLUTION HEAT TREATED, PRECIPITATION-HARDENABLE |
| SAE AMS 6514 : 2017 | STEEL, MARAGING, BARS, FORGINGS, TUBING, AND RINGS 18.5NI - 9.0CO - 4.9MO - 0.65TI - 0.10AL CONSUMABLE ELECTRODE VACUUM MELTED, ANNEALED |
| SAE AMS 5651 : 2012 | STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 25CR - 20NI (SAE 30310), SOLUTION HEAT TREATED |
| SAE AMS 5900 : 2000 | STEEL BARS, FORGINGS, AND TUBING, CORROSION RESISTANT, 14CR - 2.1MO - 0.30CB - 1.0V (1.05 - 1.15C), PREMIUM AIRCRAFT QUALITY FOR BEARING APPLICATIONS, DOUBLE VACUUM MELTED |
| SAE AMS 6280 : 2017 | STEEL BARS, FORGINGS, AND RINGS, 0.50CR - 0.55NI - 0.20MO (0.28 - 0.33C) (SAE 8630) |
| SAE AMS 6304 : 2016 | LOW-ALLOY STEEL, HEAT-RESISTANT, BARS, FORGINGS, AND TUBING, 0.95CR - 0.55MO - 0.30V (0.40 - 0.50C) |
| SAE AMS 6378 : 2014 | STEEL BARS, 1.0CR - 0.20MO - 0.45SE (0.39 - 0.48C) (4142H MODIFIED), DIE-DRAWN, 130 KSI (896 MPA) YIELD STRENGTH, FREE MACHINING |
| SAE AMS 7906D : 2015(R2018) | BERYLLIUM BARS, RODS, TUBING, AND SHAPES, STANDARD GRADE |
| SAE AMS 6475 : 2013 | STEEL, NITRIDING, BARS, FORGINGS, AND TUBING, 1.1CR - 3.5NI - 0.25MO - 1.2AL (0.21 - 0.26C) |
| SAE AMS 5621 : 2015 | STEEL, CORROSION RESISTANT, BARS, WIRE, AND FORGINGS, 13CR (0.30-0.40C) (51420), ANNEALED |
| SAE AMS 5636 : 2006 | STEEL, CORROSION-RESISTANT, BARS AND WIRE, 18CR - 9.0NI (SAE 30302), SOLUTION HEAT TREATED AND COLD DRAWN, 100 KSI (689 MPA) TENSILE STRENGTH |
| SAE AMS 6370 : 2016 | STEEL, BARS, FORGINGS, AND RINGS, 0.95CR - 0.20MO (0.28 - 0.33C) (SAE 4130) |
| SAE AMS 6413 : 2016 | STEEL, MECHANICAL TUBING 0.80CR - 1.8NI - 0.25MO (0.35 - 0.40C) (4337) |
| SAE AMS 5442 : 2017 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, NI - 18CR - 2.8MO - 5.5CB(NB) - 0.70TI - 1.50AL - 10FE - 9CO - 1W, CONSUMABLE ELECTRODE REMELTED OR VACUUM INDUCTION MELTED, 1775 DEGREES F (968 DEGREES C) SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 5922 : 2015 | STEEL, CORROSION-RESISTANT, BARS, AND FORGINGS, 10CR - 5.5NI - 14CO - 2MO - 1W (0.19-0.23C), VACUUM INDUCTION MELTED, VACUUM ARC REMELTED, NORMALIZED, ANNEALED |
| SAE AMS 5642 : 2013 | STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, AND FORGINGS, 18CR - 10.5NI - 0.60CB, FREE-MACHINING, SOLUTION HEAT TREATED |
| SAE AMS 5743 : 2014 | STEEL, CORROSION AND HEAT-RESISTANT, BARS AND FORGINGS 15.5CR - 4.5NI - 2.9MO - 0.10N SOLUTION HEAT TREATED, SUB-ZERO COOLED, EQUALIZED, AND OVER-TEMPERED |
| SAE AMS 6551 : 2013 | STEEL BARS, FORGINGS AND TUBING 1.75CR - 4.0NI - 0.5MO - (0.35 - 0.40C) PREMIUM AIRCRAFT QUALITY CONSUMABLE ELECTRODE VACUUM REMELTED |
| SAE AMS 5629H : 2016 | STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, RINGS, AND EXTRUSIONS, 13CR - 8.0NI - 2.2MO - 1.1AL, VACUUM INDUCTION PLUS CONSUMABLE ELECTRODE MELTED, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE |
| SAE AMS 5726 : 2015 | STEEL, CORROSION AND HEAT-RESISTANT, BARS AND WIRE, 15CR - 25.5NI - 1.2MO - 2.1TI - 0.006B - 0.30V, 1800 DEGREES F (982 DEGREES C) SOLUTION HEAT TREATED AND WORK-STRENGTHENED, CONSUMABLE ELECTRODE REMELTED, 200 KSI (1379 MPA) TENSILE STRENGTH CAPABILITY |
| SAE AMS 6423 : 2016 | STEEL BARS, FORGINGS, AND TUBING, 0.92CR - 0.75NI - 0.52MO - 0.003B - 0.04V (MODIFIED 98BV40) |
| SAE AMS 5845 : 2014 | ALLOY, CORROSION-RESISTANT, ROUND BARS 20CR - 35NI - 35CO - 10MO VACUUM INDUCTION PLUS CONSUMABLE ELECTRODE VACUUM REMELTED SOLUTION HEAT TREATED, WORK STRENGTHENED, AND AGED |
| SAE AMS 5709 : 2013 | NICKEL ALLOY, CORROSION AND HEAT RESISTANT, BARS AND FORGINGS, 58NI - 19.5CR - 13.5CO - 4.3MO - 3.0TI - 1.4AL - 0.05ZR - 0.006B, CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED, 1975 DEGREE F (1079 DEGREE C) SOLUTION, STABILIZATION, AND PRECIPITATION HEAT TREATED |
| SAE AMS 6427 : 2014 | STEEL BARS, FORGINGS, AND TUBING, 0.88CR - 1.8NI - 0.42MO - 0.08V (0.25 - 0.33C) (4330 MOD) |
| SAE AMS 6547 : 2013 | STEEL BARS, FORGINGS, AND TUBINGS, 1.0CR - 3.2NI - 0.2MO - (0.12 - 0.17C), AIRCRAFT QUALITY |
| SAE AMS 5611 : 2013 | STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 12CR, FERRITE CONTROLLED, CONSUMABLE ELECTRODE MELTED |
| SAE AMS 6407 : 2017 | STEEL, BARS, FORGINGS, AND TUBING, 1.2CR - 2.0NI - 0.45MO (0.27 - 0.33C) |
| SAE AMS 5656F : 2015 | STEEL, CORROSION RESISTANT, BARS, WIRE, FORGINGS, EXTRUSIONS, AND RINGS, 9.0MN - 20CR - 6.5NI - 0.27N, SOLUTION HEAT TREATED |
| SAE AMS 5655 : 2016 | STEEL, CORROSION AND HEAT RESISTANT, BARS, WIRE, AND FORGINGS 12.5CR - 0.75NI - 1.0MO - 1.0W - 0.24V (0.20-0.25C) HARDENED AND TEMPERED |
| SAE AMS 6447 : 2016 | STEEL, BARS, FORGINGS, AND TUBING, 1.4CR (0.93-1.05C) (SAE 52100), ELECTROSLAG REMELTED |
| SAE AMS 6431 : 2017 | STEEL, BARS, FORGINGS, AND TUBING, 1.05CR - 0.55NI - 1.0MO - 0.11V (0.45 - 0.50C) (D6AC), VACUUM CONSUMABLE ELECTRODE REMELTED |
| SAE AMS 5841 : 2016 | COBALT-NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS 19CR - 36CO - 25NI - 7.0MO - 0.50CB (NB) - 2.9TI - 0.20AL - 9.0FE VACUUM INDUCTION PLUS VACUUM CONSUMABLE ELECTRODE MELTED SOLUTION HEAT TREATED FOR WORK STRENGTHENING |
| SAE AMS 7909 : 2015 | ALUMINUM BERYLLIUM, NNS PREFORMS HOT ISOSTATIC PRESSED 38AL - 62BE |
| SAE AMS 7727F : 2017(S2019) | IRON-NICKEL-COBALT ALLOY, BARS AND FORGINGS, 53FE - 29NI - 17CO, LOW EXPANSION, GLASS SEALING |
| SAE AMS 6511 : 2012 | STEEL, MARAGING, BARS, FORGINGS, TUBING, AND RINGS 18NI - 8.5CO - 3.2MO - 0.20TI - 0.10AL DOUBLE VACUUM MELTED, ANNEALED |
| SAE AMS 5666H : 2016 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, EXTRUSIONS, AND RINGS, 62NI - 21.5CR - 9.0MO - 3.65CB (NB), ANNEALED |
| SAE AMS 5701 : 2015 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 41.5NI - 16CR - 37FE - 2.9CB (NB) - 1.8TI, CONSUMABLE ELECTRODE REMELTED OR VACUUM INDUCTION MELTED, 1800 DEGREES F (982 DEGREES C) SOLUTION HEAT TREATED |
| SAE AMS 6300 : 2015 | STEEL BARS AND FORGINGS, 0.25MO (0.35 - 0.40C) (SAE 4037) |
| SAE AMS 5857 : 2013 | STEEL, CORROSION-RESISTANT, BARS AND WIRE, 19CR - 10NI (304), HIGH YIELD STRENGTH, SOLUTION HEAT TREATED AND COLD WORKED |
| SAE AMS 5768 : 2018 | ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 21CR - 20NI - 20CO - 3.0MO - 2.5W - 1.0CB - 0.15N - 31FE, SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 5745 : 2014 | STEEL, CORROSION AND HEAT-RESISTANT, BARS AND FORGINGS 16.5CR - 4.5NI - 2.9MO - 0.10N EQUALIZED AND OVER-TEMPERED |
| SAE AMS 6472 : 2014 | STEEL, BARS AND FORGINGS, NITRIDING 1.6CR - 0.35MO - 1.1AL (0.38 - 0.43C) (135 MOD) HARDENED AND TEMPERED, 112 KSI (772 MPA) TENSILE STRENGTH |
| SAE AMS 5635 : 2018 | STEEL, CORROSION-RESISTANT, BARS, WIRE, AND FORGINGS, 18CR - 9NI - 0.21PB (303PB), FREE-MACHINING, SOLUTION HEAT TREATED |
| SAE AMS 6494 : 2016 | STEEL BARS, FORGINGS, AND TUBING, 1.0CR - 2.50NI - 2.0MO - 1.10SI (0.10 - 0.20C) AIRCRAFT-QUALITY |
| SAE AMS 5715 : 2014 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 60.5NI - 23CR - 14FE - 1.4AL, ANNEALED |
| SAE AMS 5618 : 2017 | STEEL, CORROSION-RESISTANT, BARS, WIRE, AND FORGINGS, 17CR - 0.52MO (0.95 - 1.20C) (440C), CONSUMABLE ELECTRODE VACUUM MELTED |
| SAE AMS 6417 : 2015 | STEEL, BARS, FORGINGS, AND TUBING, 1.6SI - 0.82CR - 1.8NI - 0.40MO - 0.08V (0.38 - 0.43C), CONSUMABLE ELECTRODE VACUUM REMELTED |
| SAE AMS 5754 : 2012 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 47.5NI - 22CR - 1.5CO - 9.0MO - 0.60W - 18.5FE, SOLUTION HEAT TREATED |
| SAE AMS 5755 : 2014 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 64NI - 5.0CR - 24.5MO - 5.5FE, SOLUTION HEAT TREATED |
| SAE AMS 5716 : 2016 | IRON-NICKEL ALLOY, HEAT RESISTANT, BARS, WIRE, FORGINGS, AND RINGS, 44FE - 18.5CR - 35.5NI - 1.1SI, SOLUTION HEAT TREATED |
| SAE AMS 5931 : 2012 | STEEL, BARS, WIRE, FORGINGS, EXTRUSIONS, TUBING, AND RINGS WEAR, GALLING, AND CORROSION RESISTANT - 5.0MN - 3.5SI - 16.5CR - 5.0NI - 0.14N - SOLUTION HEAT TREATED |
| SAE AMS 6478 : 2001 | STEEL, BARS AND FORGINGS - 3.1CR - 11.5NI - 13.5CO - 1.2MO (0.21 - 0.25C) VACUUM MELTED, ANNEALED HEAT TREATABLE TO 290 KSI (1999 MPA) TENSILE STRENGTH |
| SAE AMS 6264 : 2014 | STEEL, CARBURIZING GRADE, BARS, FORGINGS, AND TUBING 1.2CR - 3.2NI - 0.12MO (0.14 - 0.20C) (9317) |
| SAE AMS 6340 : 2014 | STEEL BARS, FORGINGS, AND TUBING 0.88CR - 1.8NI - 0.42MO - 0.08V (0.28 - 0.33C) (4330 MOD) CONSUMABLE ELECTRODE VACUUM REMELTED |
| SAE AMS 5700G : 2018 | STEEL, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 13.5CR - 13.5NI - 0.35MO - 2.2W, ANNEALED |
| SAE AMS 6348 : 2013 | STEEL, BARS, 0.95CR - 0.20MO (0.28 TO 0.33C) (SAE 4130), NORMALIZED |
| SAE AMS 6444 : 2015 | STEEL, BARS, FORGINGS, AND TUBING, 1.45CR (0.93 - 1.05C) (SAE 52100), PREMIUM AIRCRAFT-QUALITY, CONSUMABLE ELECTRODE VACUUM REMELTED |
| SAE AMS 5702 : 2018 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 41.5NI - 16CR - 37FE - 2.9CB (NB) - 1.8TI, CONSUMABLE ELECTRODE REMELTED OR VACUUM INDUCTION MELTED, 1750 DEGREES F (954 DEGREES C) SOLUTION HEAT TREATED |
| SAE AMS 5894 : 2016 | COBALT ALLOYS, BARS, SHEET, AND PLATE, 60CO - 28CR - 4.5W - 1.15C, SOLUTION HEAT TREATED |
| SAE AMS 5932 : 2012 | STEEL, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS AND TUBING 14.5CR - 2.3NI - 12.5CO - 4.0MO - 0.60V - 0.03CB(NB), CARBURIZING, PREMIUM AIRCRAFT-QUALITY, DOUBLE VACUUM MELTED |
| SAE AMS 5895 : 2015 | STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 15CR - 25.5NI - 1.2MO - 2.1TI - 0.006B - 0.30V, CONSUMABLE ELECTRODE MELTED, 1750 DEGREES F (954 DEGREES C) SOLUTION HEAT TREATED, WELDING GRADE, PRECIPITATION HARDENABLE |
| SAE AMS5061H:2009(R2017) | STEEL, LOW CARBON BARS, AND WIRE, 0.08 - 0.20 |
| SAE AMS 5022 : 2015 | STEEL, BARS, FORGINGS, AND TUBING, FREE-CUTTING, 0.14 - 0.20C (SAE 1117) |
| SAE AMS 6371L : 2017 | STEEL, MECHANICAL TUBING, 0.95CR - 0.20MO (0.28 - 0.33C) (SAE 4130) |
| SAE AMS 6278 : 2016 | STEEL, BARS, FORGINGS, AND TUBING, 4.1CR - 3.4NI - 4.2MO - 1.2V (0.11 - 0.15C), PREMIUM AIRCRAFT-QUALITY FOR BEARING APPLICATIONS, DOUBLE VACUUM MELTED |
| SAE AMS 6327L : 2017 | STEEL BARS AND FORGINGS, 0.50CR - 0.55NI - 0.25MO (0.38 - 0.43C) (SAE 8740), HEAT TREATED, 125 KSI (862 MPA) TENSILE STRENGTH (COMPOSITION SIMILAR TO UNS G87400) |
| SAE AMS 6549 : 2013 | STEEL BARS, FORGINGS, AND TUBING, 1.0CR - 3.2NI - 0.2MO (0.12 - 0.17C), PREMIUM AIRCRAFT-QUALITY, DOUBLE VACUUM MELTED |
| SAE MAM 6415 : 1998 | STEEL, BARS, FORGINGS, AND TUBING, 0.80CR - 1.8NI - 0.25MO (0.38 - 0.43C) (SAE 4340) |
| SAE AMS 6409E : 2016 | STEEL, BARS, FORGINGS, AND TUBING 0.80CR - 1.8NI - 0.25MO (0.38 - 0.43C) (SAE 4340) SPECIAL AIRCRAFT QUALITY CLEANLINESS, NORMALIZED AND TEMPERED |
| SAE AMS 6320 : 2017 | STEEL BARS, FORGINGS, AND RINGS 0.50CR - 0.55NI - 0.25MO (0.33 - 0.38C) (8735) |
| SAE AMS 5652J : 2016 | STEEL, CORROSION AND HEAT RESISTANT, BARS, WIRE, FORGINGS, MECHANICAL TUBING, AND RINGS 25CR - 20NI - 2.0SI (314) SOLUTION HEAT TREATED |
| SAE AMS5766E:2014 | ALLOY, CORROSION AND HEAT-RESISTANT, BARS AND FORGINGS, 21CR - 32.5NI - 0.38TI - 0.38AL - 45FE, SOLUTION HEAT TREATED |
| SAE AMS 5938 : 2011 | STEEL, CORROSION-RESISTANT, BARS, WIRE, AND FORGINGS, 10CR - 12NI - 2MO - 1.45AL - 1.15TI, VACUUM INDUCTION PLUS VACUUM CONSUMABLE ELECTRODE MELTED, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE |
| SAE AMS 6323 : 2017 | STEEL, MECHANICAL TUBING 0.50CR - 0.55NI - 0.25MO (0.38 - 0.43C) (SAE 8740) |
| SAE AMS 4676 : 2017 | NICKEL-COPPER ALLOY, CORROSION-RESISTANT, BARS AND FORGINGS, 66.5NI - 3.0AL - 0.62TI - 28CU, HOT-FINISHED, PRECIPITATION HARDENABLE |
| SAE AMS5751F : 1982(S2017) | Alloy Bars, Forgings, and Rings, Corrosion and Heat Resistant 54Ni - 17.5Cr - 16.5Co - 4.0Mo - 2.9Ti - 2.9Al - 0.006B Solution, Stabilization, and Precipitation Heat Treated Consumable Electrode or Vacuum Induction Melted |
| SAE AMS 6477 : 2015 | STEEL, BARS, FORGINGS, AND TUBING, 0.80CR (0.90 - 1.03C), FOR BEARING APPLICATIONS |
| SAE AMS 5623 D :1990(S2017) | STEEL BARS AND FORGINGS, HIGH EXPANSION, 9.5NO - 5.5MN (0.55 - 0.65C) ANNEALED |
| SAE AMS 6509A : 2017 | STEEL BARS AND FORGINGS 3.5CR - 7.5NI - 16.3CO - 1.75MO - 0.2W - (0.09 - 0.13C) DOUBLE VACUUM MELTED, NORMALIZED, ANNEALED |
| SAE AMS 5650 : 2018 | STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, MECHANICAL TUBING, AND RINGS, 23CR - 13.5NI (309S), SOLUTION HEAT TREATED |
| SAE AMS 6302K : 2017 | LOW-ALLOY STEEL, HEAT-RESISTANT, BARS, FORGINGS, AND TUBING, 0.65SI - 1.25CR - 0.50MO - 0.25V (0.28 - 0.33C) |
| SAE AMS 5713K : 2016 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 53NI - 19CR - 11CO - 9.8MO - 3.2TI - 1.6AL - 0.006B, VACUUM MELTED, SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 6292 : 2014 | STEEL BARS AND FORGINGS, CARBURIZING 1.8NI - 0.25MO (0.15 - 0.20C) (SAE 4617) |
| SAE AMS 5772 E: 2016 | COBALT ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 40CO - 22CR - 22NI - 14.5W - 0.07LA, SOLUTION HEAT TREATED |
| SAE AMS 5069 : 2001(S2016) | STEEL BARS, FORGINGS, AND TUBING 0.15 - 0.20C (SAE 1018) |
| SAE AMS 6324 : 2014 | STEEL BARS, FORGINGS, AND TUBING, 0.65CR - 0.70NI - 0.25MO (0.38 - 0.43C) (8740 MODIFIED) |
| SAE AMS 6415 : 2016 | STEEL, BARS, FORGINGS, AND TUBING 0.80CR - 1.8NI - 0.25MO (0.38 - 0.43C) (SAE 4340) |
| SAE AMS 5854 : 2015 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, AND RINGS, 61NI - 20.5CR - 8.5MO - 3.4CB(NB) - 1.3TI - 5.0FE, CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED SOLUTION HEAT TREATED |
| SAE AMS 6490 : 2014 | STEEL BARS, FORGINGS, AND TUBING 4.0CR - 4.2MO - 1.0V (0.77 - 0.85C) (M-50) PREMIUM AIRCRAFT-QUALITY FOR BEARING APPLICATIONS CONSUMABLE ELECTRODE VACUUM MELTED |
| SAE AMS 6381 : 2017 | STEEL, MECHANICAL TUBING, 0.95CR - 0.20MO (0.38 - 0.43C) (SAE 4140) |
| SAE AMS 5661 : 2012 | NICKEL-IRON ALLOY, CORROSION AND HEAT RESISTANT, BARS, FORGINGS, AND RINGS - 42.5NI - 12.5CR - 5.8MO - 2.9TI - 0.015B - 35FE - CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED SOLUTION, STABILIZATION, AND PRECIPITATION HEAT TREATED |
| SAE AMS 6414 : 2016 | STEEL, BARS, FORGINGS, AND TUBING 0.80CR - 1.8NI - 0.25MO (0.38 - 0.43C) (SAE 4340) VACUUM CONSUMABLE ELECTRODE REMELTED |
| SAE AMS5640V:2016 | STEEL, CORROSION-RESISTANT, BARS, WIRE, AND FORGINGS, 18CR - 9.0NI, FREE MACHINING |
| SAE AMS 5763E : 2016 | STEEL, CORROSION RESISTANT BARS, FORGINGS, TUBING, AND RINGS, 15CR - 6.5NI - 0.75MO - 0.50CB (NB) - 1.5CU, SOLUTION HEAT TREATED |
| SAE AMS 5630 : 2013 | STEEL, CORROSION-RESISTANT, BARS, WIRE, AND FORGINGS, 17CR - 0.52MO (0.95 - 1.20C) (440C) |
| SAE AMS 5641 : 2016 | STEEL, CORROSION-RESISTANT, BARS, WIRE, AND FORGINGS, 18.5CR - 10NI - 0.22SE (303SE), FREE-MACHINING; SWAGING OR UPSETTING SOLUTION HEAT TREATED |
| SAE AMS 5637 : 2012 | STEEL, CORROSION RESISTANT, BARS AND WIRE 18CR - 9.0NI (SAE 30302) SOLUTION HEAT TREATED, COLD DRAWN AND STRESS RELIEVED 125 KSI (862 MPA) TENSILE STRENGTH |
| SAE AMS 5649 : 2012 | STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, AND FORGINGS, 18CR - 13NI - 2.1MO, FREE MACHINING, SOLUTION HEAT TREATED |
| SAE AMS 5632 : 2018 | STEEL, CORROSION-RESISTANT, BARS, WIRE, AND FORGINGS, 17CR - 0.50MO (0.95 - 1.20C) (440F), FREE-MACHINING, ANNEALED |
| SAE AMS 6529 : 2017 | STEEL, BARS, 0.95CR - 0.20MO (0.38 - 0.43C) (SAE 4140), SPECIAL AIRCRAFT-QUALITY CLEANLINESS, NORMALIZED |
| SAE AMS 5833 : 2014 | COBALT ALLOY, CORROSION AND HEAT-RESISTANT, ROUND WIRE 20CR - 15NI - 40CO - 7.0MO - 16FE SOLUTION HEAT TREATED AND COLD DRAWN |
| SAE AMS 6346 : 2013 | STEEL BARS, 0.95CR - 0.20MO (0.28 TO 0.33C) (SAE 4130), HARDENED AND TEMPERED, 125 KSI (862 MPA) TENSILE STRENGTH |
| SAE AMS 5844 : 2014 | ALLOY, CORROSION-RESISTANT, ROUND BARS, 20CR - 35NI - 35CO - 10MO, VACUUM INDUCTION PLUS CONSUMABLE ELECTRODE VACUUM REMELTED, SOLUTION HEAT TREATED AND WORK STRENGTHENED |
| SAE AMS 6270 : 2014 | STEEL, BARS, FORGINGS, AND TUBING 0.50CR - 0.55NI - 0.20MO (0.13 - 0.18C) (SAE 8615) |
| SAE AMS 6303 : 2018 | STEEL BARS AND FORGINGS, LOW ALLOY, HEAT-RESISTANT, 0.65SI - 1.25CR - 0.50MO - 0.85V (0.25 - 0.30C) |
| SAE AMS 5678 : 2013 | STEEL, CORROSION RESISTANT, WIRE, 17CR - 7.1NI - 1.1AL, COLD DRAWN, PRECIPITATION-HARDENABLE |
| SAE AMS 5890 : 2015 | NICKEL, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND EXTRUSIONS, THORIA DISPERSION STRENGTHENED, 2.2THO[2], STRESS-RELIEVED |
| SAE AMS 6277 : 2016 | STEEL BARS, FORGINGS, AND TUBING, 0.50CR - 0.55NI - 0.20MO (0.18 - 0.23C) (SAE 8620), VACUUM ARC OR ELECTROSLAG REMELTED |
| SAE AMS 5762 : 2016 | STEEL, CORROSION RESISTANT, BARS, WIRE, AND FORGINGS, 5.8MN - 17CR - 5.8NI - 2.0CU - 0.26S, FREE MACHINING, SOLUTION HEAT TREATED |
| SAE AMS 5929 : 2014 | STEEL, CORROSION-RESISTANT, BARS AND FORGINGS, 11.5CR -10NI - 1.0AL - 0.5TI - 1.0CU - 1.0W, VACUUM INDUCTION PLUS VACUUM CONSUMABLE ELECTRODE MELTED SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE |
| SAE AMS 6281 : 2015 | STEEL, MECHANICAL TUBING, 0.50CR - 0.55NI - 0.20MO (0.28 - 0.33C) (SAE 8630) |
| SAE AMS 7911 : 2015 | ALUMINUM BERYLLIUM, PREFORMS HOT ISOSTATIC PRESSED AND HEAT TREATED 38AL - 62BE |
| SAE AMS 6479 : 2015 | STEEL, BARS, FORGINGS, AND TUBING 1.45CR (0.93-1.05C) (SAE 52100) SPECIAL AIRCRAFT-QUALITY CLEANLINESS |
| SAE AMS 6255F : 2016 | STEEL BARS, FORGINGS, AND TUBING, 1.1SI - 1.45CR - 1.0MO - 0.08AL (0.16 - 0.22C), DOUBLE VACUUM MELTED |
| NASA STD 6002 : 2008 | APPLYING DATA MATRIX IDENTIFICATION SYMBOLS ON AEROSPACE PARTS |
| SAE AMS7910D:2015(R2018) | BERYLLIUM NEAR-NET PREFORMS, STANDARD GRADE, COLD ISOSTATIC PRESSED, SINTERED |
| NASA HDBK 6003 : 2008 | APPLICATION OF DATA MATRIX IDENTIFICATION SYMBOLS TO AEROSPACE PARTS USING DIRECT PART MARKING METHODS/TECHNIQUES |
| SAE AMS 7904E : 2015(R2018) | Beryllium Bars, Rods, Tubing, and Shapes High Ductility Grade |
| SAE AMS 6276 : 2016 | STEEL, BARS, FORGINGS, AND TUBING, 0.50CR - 0.55NI - 0.20MO (0.18 - 0.23C) (SAE 8620), CONSUMABLE ELECTRODE VACUUM REMELTED |
| SAE AMS 5441 : 2016 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, NI - 18CR - 2.8MO - 5.5CB(NB) - 0.70TI - 1.50AL - 10FE - 9CO - 1W, CONSUMABLE ELECTRODE REMELTED OR VACUUM INDUCTION MELTED, 1775 DEGREES F (968 DEGREES C) SOLUTION HEAT TREATED, PRECIPITATION-HARDENABLE |
| SAE AMS 6429 : 2014 | STEEL BARS, FORGINGS, TUBING, AND RINGS 0.78CR - 1.8NI - 0.35MO - 0.20V (0.33 - 0.38C) (4335 MOD) CONSUMABLE ELECTRODE VACUUM MELTED |
| SAE AMS 6412 : 2015 | STEEL, BARS AND FORGINGS 0.80CR - 1.8NI - 0.25MO (0.35 - 0.40C) (4337) |
| SAE AMS 5738 : 2013 | STEEL, CORROSION-RESISTANT, BARS AND WIRE, 18CR - 9NI (SAE 30303F), FREE MACHINING, HIGH YIELD STRENGTH, SOLUTION HEAT TREATED AND COLD WORKED |
| SAE AMS 5614 : 2013 | STEEL, CORROSION AND HEAT RESISTANT, BARS, WIRE, AND FORGINGS 12CR - 0.50MO, ANNEALED |
| SAE AMS 5744 : 2013 | STEEL, CORROSION AND HEAT-RESISTANT, BARS AND FORGINGS, 15.5CR - 4.5NI - 2.9MO - 0.10N, HEAT TREATED, 170 KSI (1172 MPA) TENSILE STRENGTH |
| SAE AMS 5627 : 2013 | STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 17CR (SAE 51430), ANNEALED |
| MIL S 18728 : D | STEEL PLATE, SHEET, AND STRIP, ALLOY, 8630, AIRCRAFT QUALITY |
| SAE AMS 6482 : 2015 | STEEL BARS, FORGINGS, AND TUBING, 1.5SI - 1.25CR - 3.8NI - 0.50MO - 0.30V (0.40C) VACUUM REMELTED, ANNEALED |
| SAE AMS 5612 : 2012 | STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 12CR, FERRITE CONTROLLED, ANNEALED |
| SAE AMS 6294 : 2014 | STEEL BARS AND FORGINGS, CARBURIZING 1.8NI - 0.25MO (0.17 - 0.22C) (SAE 4620) |
| SAE AMS 6499 : 2015 | STEEL, BARS, FORGINGS, AND TUBING, 2.7SI - 0.85CR - 1.8NI - 0.4MO - 0.2V - (0.37 - 0.44C), DOUBLE VACUUM MELTED |
| SAE AMS 5749 : 2014 | STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, AND TUBING 14.5CR - 4.0MO - 1.2V (1.10-1.20C) PREMIUM QUALITY FOR BEARING APPLICATIONS, DOUBLE VACUUM MELTED |
| SAE AMS 6493 : 2013 | STEEL BARS, FORGINGS, AND TUBING, 1.0CR - 3.25NI - 0.40MO (0.17 - 0.22C), ELECTROSLAG REMELTED OR CONSUMABLE ELECTRODE VACUUM REMELTED, PREMIUM AIRCRAFT-QUALITY |
| SAE AMS 6497 : 2013 | STEEL BARS, FORGINGS, AND TUBING, NITRIDING 1.4CR - 1.2MO - 0.3V (0.29 - 0.36C), ELECTROSLAG REMELTED OR CONSUMABLE ELECTRODE VACUUM REMELTED, PREMIUM AIRCRAFT-QUALITY FOR BEARING APPLICATIONS |
| SAE AMS 5737 : 2012 | STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS AND TUBING, 15CR - 25.5NI - 1.2MO - 2.1TI - 0.006B - 0.30V, CONSUMABLE ELECTRODE MELTED, 1650 DEGREES F (899 DEGREES C), SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 6512 H : 2017 | STEEL, MARAGING, BARS, FORGINGS, TUBING, AND RINGS 18NI - 7.8CO - 4.9MO - 0.40TI - 0.10AL CONSUMABLE ELECTRODE VACUUM MELTED, ANNEALED |
| SAE AMS 6308 : 2012 | STEEL, BARS AND FORGINGS, 0.90SI - 1.0CR - 2.0NI - 3.2MO - 2.0CU - 0.10V (0.07 - 0.13C), VACUUM ARC OR ELECTROSLAG REMELTED |
| SAE AMS 6421 : 2016 | STEEL BARS, FORGINGS, AND TUBING 0.80CR - 0.85NI - 0.20MO - 0.003B (0.35 - 0.40C) (MODIFIED 98B37) |
| SAE AMS 5915 : 2014 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS AND FORGINGS, 57NI - 20CR - 10CO - 8.5MO - 2.1TI - 1.5AL - 0.005B, VACUUM INDUCTION AND CONSUMABLE ELECTRODE MELTED, SOLUTION HEAT TREATED, PRECIPITATION HEAT TREATABLE |
| SAE AMS 5711 : 2015 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 65NI - 15.8CR - 15.2MO - 0.30AL - 0.05LA, SOLUTION HEAT TREATED |
| SAE AMS 5671 : 2013 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 72NI - 15.5CR - 0.95CB - 2.5TI - 0.70AL - 7.0FE, CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED, 1800 DEGREES F (982 DEGREES C) SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE |
| SAE AMS 6496 : 2013 | STEEL BARS, FORGINGS, AND TUBING, NITRIDING, 1.4CR - 1.2MO - 0.3V (0.29 - 0.36C) AIRCRAFT-QUALITY FOR BEARING APPLICATIONS |
| SAE AMS 6515 : 2012 | STEEL, MARAGING, BARS, FORGINGS, TUBING, AND RINGS 18.5NI - 12.0CO - 4.9MO - 1.40TI - 0.10AL DOUBLE VACUUM MELTED, ANNEALED |
| SAE AMS 6372 : 2017 | STEEL, MECHANICAL TUBING, 0.95CR - 0.20MO (0.33 - 0.38C) (SAE 4135) |
| SAE AMS 5689 : 2018 | STEEL, CORROSION AND HEAT RESISTANT, WIRE 18CR - 10.5NI - 0.40TI (321) SOLUTION HEAT TREATED |
| SAE AMS 5664 : 2017 | NICKEL ALLOY, CORROSION AND HEAT RESISTANT, BARS, FORGINGS, AND RINGS, 52.5NI - 19CR - 3.0MO - 5.1CB (NB) - 0.90TI - 0.50AL - 18FE, CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED 1950 DEGREES F (1066 DEGREES C) SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE |
| SAE AMS 6382 : 2014 | STEEL, BARS, FORGINGS, AND RINGS 0.95CR - 0.20MO (0.38 - 0.43C) (SAE 4140) ANNEALED |
| SAE AMS 5708 : 2015 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, WIRE FORGINGS, AND RINGS, 58NI - 19.5CR - 13.5CO - 4.3MO - 3.0TI - 1.4AL - 0.05ZR - 0.006B, CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED, 1975 DEGREES F (1079 DEGREES C) SOLUTION HEAT TREATED |
| SAE AMS5062J:2004(S2017) | STEEL, LOW CARBON, BARS, FORGINGS, TUBING, SHEET, STRIP, AND PLATE, 0.25 CARBON, MAXIMUM |
| SAE AMS 5746 : 2012 | ALLOY, CORROSION AND HEAT RESISTANT, BARS AND FORGINGS - 15CR - 45NI - 4.1MO - 4.1W - 3.0TI - 1.0AL - 31FE (D979) CONSUMABLE ELECTRODE VACUUM MELTED, SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 5898 : 2018 | STEEL, CORROSION RESISTANT, BARS, WIRE, AND FORGINGS, 15.2CR - 1.0MO - 0.40N - (0.28 - 0.34C), CONSUMABLE ELECTRODE MELTED UNDER PRESSURE |
| SAE AMS 6492 : 2013 | STEEL BARS, FORGINGS, AND TUBING, 1.0CR - 3.25NI - 0.40MO (0.17 - 0.22C) AIRCRAFT QUALITY |
| SAE AMS 6317K : 2017 | STEEL BARS AND FORGINGS, 1.8NI - 0.25MO (0.38 - 0.43C) (4640), HEAT TREATED, 125 KSI (862 MPA) TENSILE STRENGTH |
| SAE AMS 5887 : 2015 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 54NI - 22CR - 12.5CO - 9.0MO - 1.2AL, CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED, ANNEALED |
| SAE AMS 6312 : 2015 | STEEL BARS, FORGINGS, AND TUBING, 1.8NI - 0.25MO (0.38 - 0.43C) (4640) |
| SAE AMS 6272 : 2014 | STEEL BARS, FORGINGS, AND TUBING 0.50CR - 0.55NI - 0.20MO (0.15 - 0.20C) (SAE 8617) |
| SAE AMS 5962 : 2012 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, ROUND BARS AND WIRE, 52.5NI - 19CR - 3.0MO - 5.1CB - 0.90TI - 0.50AL - 18FE, CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED, 1775 DEGREES F (968 DEGREES C) SOLUTION TREATED AND WORK STRENGTHENED, PRECIPITATION HARDENABLE |
| SAE AMS 6517A : 2015 | STEEL, BARS, AND FORGINGS, 3.5CR - 9.5NI - 18CO - 1.1MO (0.13 - 0.17C) DOUBLE VACUUM MELTED, NORMALIZED, ANNEALED |
| SAE AMS 5759M : 2015 | COBALT ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGING STOCK, FORGINGS, AND RINGS 52CO - 20CR - 10NI - 15W |
| SAE AMS 5703 : 2018 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 41.5NI - 16CR - 37FE - 2.9CB - 1.8TI, CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED, 1750 DEGREES F (954 DEGREES C) SOLUTION, STABILIZATION, AND PRECIPITATION HEAT TREATED |
| SAE AMS 6325 : 2015 | STEEL, BARS, AND FORGINGS 0.50CR - 0.55NI - 0.25MO (0.38 - 0.43C) (SAE 8740) HEAT TREATED, 105 KSI (724 MPA) TENSILE STRENGTH |
| SAE AMS 5934 : 2016 | STEEL, EXTRA HIGH TOUGHNESS, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, RINGS, AND EXTRUSIONS, 13CR - 8.0NI - 2.2MO - 1.1AL, VACUUM INDUCTION PLUS CONSUMABLE ELECTRODE MELTED, SOLUTION HEAT TREATED, PRECIPITATION-HARDENABLE |
| SAE AMS 6426 : 1990(S2016) | STEEL BARS, FORGINGS, AND TUBING, 0.75SI - 1.0CR - 0.58MO (0.80 - 0.90C), CONSUMABLE ELECTRODE VACUUM MELTED |
| SAE AMS 6419 : 2015 | STEEL, BARS, FORGINGS, AND TUBING, 1.6SI - 0.82CR - 1.8NI - 0.40MO - 0.08V (0.40 - 0.45C), CONSUMABLE ELECTRODE VACUUM REMELTED |
| SAE AMS 6470 : 2014 | STEEL, NITRIDING, BARS, FORGINGS, AND TUBING 1.6CR - 0.35MO - 1.13AL (0.38 - 0.43C) (135 MOD) |
| SAE AMS 7912 : 2015 | ALUMINUM-BERYLLIUM ALLOY, EXTRUSIONS, 38AL - 62BE, ANNEALED |
| SAE AMS 5662 : 2016 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS 52.5NI - 19CR - 3.0MO - 5.1CB (NB) - 0.90TI - 0.50AI - 18FE CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED 1775 DEGREES F (968 DEGREES C) SOLUTION HEAT TREATED, PRECIPITATION-HARDENABLE |
| SAE AMS 6250 : 2015 | STEEL BARS, FORGINGS, AND TUBING, 1.5CR - 3.5NI (0.07 - 0.13C) (3310) |
| SAE AMS 5769 : 2014 | ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 21CR - 20NI - 20CO - 3.0MO - 2.5W - 1.0(CB+TA) - 0.15N - 32FE SOLUTION HEAT TREATED |
| SAE AMS 5707 : 2017 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS 57NI - 19.5CR - 13.5CO - 4.3MO - 3.0TI - 1.4AL - 0.05ZR - 0.006B CONSUMABLE ELECTRODE REMELTED OR VACUUM INDUCTION MELTED 1825 TO 1900 DEGREES F (996 TO 1038 DEGREES C) SOLUTION, STABILIZATION, AND PRECIPITATION HEAT TREATED |
| SAE AMS 6543 : 2016 | STEEL, BARS AND FORGINGS, 2.0CR - 10NI - 8.0CO - 1.0MO (0.10 - 0.14C) (HY-180), DOUBLE VACUUM MELTED, SOLUTION HEAT TREATED, MARAGE HARDENABLE |
| SAE AMS 5717 : 2014 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS 45.5NI - 25.5CR - 3.2CO - 3.2MO - 3.2W - 18.5FE SOLUTION HEAT TREATED |
| SAE AMS 6305 : 2016 | STEEL, HEAT-RESISTANT, BARS, FORGINGS, AND TUBING, 0.95CR - 0.55MO - 0.30V (0.40 - 0.50C), VACUUM ARC REMELTED |
| SAE AMS 6424 : 2017 | STEEL BARS, FORGINGS, AND TUBING 0.80CR - 1.8NI - 0.25MO (0.49 - 0.55C) |
| SAE AMS 6532 : 2014 | STEEL, BARS AND FORGINGS, 3.1CR - 11.5NI - 13.5CO - 1.2MO (0.21 - 0.25C) VACUUM MELTED, NORMALIZED AND OVERAGED, PRECIPITATION HARDENABLE |
| SAE AMS 6290 : 2013 | STEEL, BARS AND FORGINGS, CARBURIZING, 1.8NI - 0.25MO (0.11 - 0.17C) (SAE 4615) |
| SAE AMS 5718E : 2016 | STEEL, BARS, FORGINGS, TUBING, AND RINGS, CORROSION RESISTANT, 11.8CR - 2.5NI - 1.8MO - 0.33V (0.08 - 0.15C), ANNEALED |
| SAE AMS 5919 : 2013 | COBALT-NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, ROUND BARS 19CR - 36CO - 25NI - 7.0MO - 0.50CB (NB) - 2.9TI - 0.20AL - 9.0FE VACUUM INDUCTION PLUS VACUUM CONSUMABLE ELECTRODE MELTED SOLUTION HEAT TREATED AND WORK STRENGTHENED, MODIFIED STRENGTH |
| SAE AMS 5933 : 1999 | STEEL, CORROSION RESISTANT BARS AND FORGINGS, 12.5CR - 1.0NI - 15.5CO - 2.0MO, VACUUM INDUCTION PLUS, VACUUM CONSUMABLE ELECTRODE REMELTED |
| SAE AMS 5670 : 2012 | NICKEL ALLOY, CORROSION AND HEAT RESISTANT, BARS, FORGINGS, AND RINGS - 72NI - 15.5CR - 0.95CB - 2.5TI - 0.70AL - 7.0FE, 1800 DEGREE F (982 DEGREE C) SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE |
| SAE AMS 6560 : 2013 | STEEL BARS, WIRE AND FORGINGS 10CO - 7MO - 6V - 6W - 4CR (2.2 - 2.4C) PREMIUM AIRCRAFT-QUALITY FOR BEARING APPLICATIONS INERT GAS ATOMIZED AND HOT ISOSTATICALLY PRESSED CONSOLIDATED |
| SAE AMS 5920 : 2013 | COBALT-NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, ROUND BARS 19CR - 36CO - 25NI - 7.0MO - 0.50CB (NB) - 2.9TI - 0.20AL - 9.0FE VACUUM INDUCTION PLUS VACUUM CONSUMABLE ELECTRODE MELTED SOLUTION HEAT TREATED, WORK STRENGTHENED AND AGED, MODIFIED STRENGTH |
| SAE AMS6481D:2017 | STEEL BARS, FORGINGS, AND TUBING, NITRIDING, 3CR - 1MO - 0.2V - (0.29 - 0.36C), PREMIUM AIRCRAFT-QUALITY FOR BEARING APPLICATIONS, DOUBLE VACUUM MELTED |
| SAE AMS 6448 : 2013 | STEEL, BARS, FORGINGS AND TUBING 0.95CR - 0.22V (0.48 - 0.53C) (SAE 6150) |
| SAE AMS 6299 : 2014 | STEEL BARS, FORGINGS, AND TUBING, CARBURIZING, 0.50CR - 1.8NI - 0.25MO (0.17 - 0.23C) (SAE 4320H) |
| SAE AMS 7726 H : 2000(S2017) | IRON-NICKEL-COBALT ALLOY, WIRE, 53FE - 2.9NI - 17CO, LOW EXPANSION, GLASS SEALING, ANNEALED |
| SAE AMS 6430J : 2017 | STEEL, BARS, FORGINGS, TUBING, AND RINGS, 0.75MN - 0.78CR - 1.8NI - 0.35MO - 0.20V (0.32 - 0.38C), (4335 MODIFIED) |
| SAE AMS 6484 : 2016 | STEEL, BARS, FORGINGS, AND TUBING 0.80CR - 1.8NI - 0.25MO (0.38 - 0.43C) (SAE 4340) NORMALIZED AND TEMPERED |
| SAE AMS 6526 : 2016 | STEEL, BARS, FORGINGS, TUBING, AND RINGS, 1.0CR - 7.5NI - 4.5CO - 1.0MO - 0.09V (0.29 - 0.34C), CONSUMABLE ELECTRODE VACUUM REMELTED, ANNEALED |
| SAE AMS 6498 : 2013 | STEEL BARS, FORGINGS, AND TUBING, NITRIDING, 1.4CR - 1.2MO - 0.3V (0.29 - 0.36C), DOUBLE VACUUM MELTED, PREMIUM AIRCRAFT-QUALITY FOR BEARING APPLICATIONS |
| SAE AMS 6342 K:1990(S2015) | STEEL BARS, FORGINGS, AND TUBING, 0.80CR - 1.0NI - 0.25MO (0.38 - 0.43C) (SAE 9840) |
| SAE AMS 7718 : 2015 | NICKEL-IRON ALLOY, MAGNETIC, BARS, RODS, TUBING, AND FORGINGS 50NI - 50FE |
| SAE AMS 5060 : 2003(S2016) | STEEL, BARS, FORGINGS AND TUBING 0.13 - 0.18C (SAE 1015) |
| SAE AMS 5080 : 2016 | STEEL, BARS, FORGINGS, AND TUBING, 0.31 - 0.38C (SAE 1035) |
| SAE MAM 5706 : 2003 | ALLOY BARS, FORGINGS, AND RINGS, CORROSION AND HEAT RESISTANT, 57NI - 19.5CR - 13.5CO - 4.3MO - 3.0TI - 1.4A1 - 0.006B - 0.05ZR, CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED, 995 DEGREES - 1040 DEGREES C SOLUTION HEAT TREATED |
| SAE AMS 6408 : 2018 | STEEL, HOTWORK TOOL, BARS AND FORGINGS, 5.25CR - 1.5MO - 1.0V (0.35-0.45C) (H-13), ELECTROSLAG REMELTED (ESR) OR CONSUMABLE ELECTRODE VACUUM ARC REMELTED (VAR), ANNEALED |
| SAE AMS 6548 : 2013 | STEEL BARS, FORGINGS, AND TUBING, 1.0CR - 3.2NI - 0.2MO (0.12 - 0.17C), PREMIUM AIRCRAFT-QUALITY, ELECTROSLAG REMELTED OR CONSUMABLE ELECTRODE VACUUM REMELTED |
| SAE AMS 6425 : 2015 | STEEL, BARS, FORGINGS, AND TUBING, 1.4MN - 1.5SI - 0.30CR - 1.8NI - 0.40MO (0.23 - 0.28C), CONSUMABLE ELECTRODE VACUUM MELTED |
| SAE AMS5659S : 2016 | Steel, Corrosion-Resistant, Bars, Wire, Forgings, Rings, and Extrusions 15Cr - 4.5Ni - 0.30Cb (Nb) - 3.5Cu<br> |
| SAE AMS 5639 : 2017 | STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, MECHANICAL TUBING, AND RINGS, 19CR - 10NI, SOLUTION HEAT TREATED |
| SAE AMS 5648 : 2016 | STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 17CR - 12NI - 2.5MO (316), SOLUTION HEAT TREATED |
| SAE AMS 5660 : 2015 | NICKEL-IRON ALLOY, CORROSION AND HEAT-RESISTANT, BARS AND FORGINGS, 12.5CR - 42.5NI - 6.0MO - 2.7TI - 0.015B - 34FE, CONSUMABLE ELECTRODE REMELTED OR VACUUM INDUCTION MELTED SOLUTION, STABILIZATION, AND PRECIPITATION HEAT TREATED |
| SAE AMS 5930 : 2017 | STEEL, CORROSION-RESISTANT, BARS AND FORGINGS 13.0CR - 2.5NI - 5.5CO - 2.0MO - 0.60V (0.05 - 0.09C) VACUUM INDUCTION PLUS VACUUM CONSUMABLE ELECTRODE MELTED |
| SAE AMS 5891 : 2013 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 60NI - 22CR - 2.0MO - 14W - 0.35AL - 0.03LA, ANNEALED |
| SAE AMS 5620 : 2012 | STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, AND FORGINGS, 13CR (0.30 - 0.40C) (SAE 51420F, 51420FSE), FREE-MACHINING GRADE |
| MIL-DTL-15119 Revision B:2012 | Tubing, Round, Seamless Alloy Steel |
| SAE AMS 5647 : 2017 | STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, MECHANICAL TUBING, AND RINGS, 19CR - 9.5NI, SOLUTION HEAT TREATED |
| SAE AMS 5758 : 2014 | ALLOY, CORROSION-RESISTANT, BARS, 20CR - 35NI - 35CO - 10MO, VACUUM INDUCTION PLUS CONSUMABLE ELECTRODE VACUUM REMELTED, SOLUTION HEAT TREATED FOR WORK STRENGTHENING |
| SAE AMS 5884 : 2016 | IRON-NICKEL ALLOY, BARS, FORGINGS, AND RINGS, 42FE - 37.5NI - 14CO - 4.8CB(NB) - 1.6TI, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE MULTIPLE MELTED, HIGH TEMPERATURE, LOW EXPANSION |
| SAE AMS 6491 : 2014 | STEEL BARS, FORGINGS, AND TUBING 4.1CR - 4.2MO - 1.0V (0.80 - 0.85C) (M-50) PREMIUM AIRCRAFT-QUALITY FOR BEARING APPLICATIONS, DOUBLE VACUUM MELTED |
| SAE AMS 6411 : 2018 | STEEL BARS, FORGINGS, AND TUBING, 0.88CR - 1.8NI - 0.42MO - 0.08V (0.28 - 0.33C) (4330 MOD) CONSUMABLE ELECTRODE REMELTED |
| SAE AMS 6265 : 2016 | STEEL, BARS, FORGINGS, AND TUBING, 1.2CR - 3.25NI - 0.12MO (0.07 - 0.13C) (9310), VACUUM CONSUMABLE ELECTRODE REMELTED |
| SAE AMS 6495 : 2016 | STEEL BARS, FORGINGS, AND TUBING, 1.0CR - 2.50NI - 2.0MO - 1.10SI (0.10 - 0.20C), PREMIUM AIRCRAFT-QUALITY, ELECTROSLAG REMELTED OR CONSUMABLE ELECTRODE VACUUM REMELTED |
| SAE AMS 5712 : 2016 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 53NI - 19CR - 11CO - 9.8MO - 3.2TI - 1.6AL - 0.006B, VACUUM MELTED, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE |
| SAE AMS 6322 : 2014 | STEEL BARS, FORGINGS, AND RINGS, 0.50CR - 0.55NI - 0.25MO (0.38 - 0.43C) (SAE 8740) |
| SAE AMS 5773 : 2012 | STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, MECHANICAL TUBING, AND RINGS, 15CR - 6.5NI - 0.75MO - 0.30 CB (NB) - 1.5CU, CONSUMABLE ELECTRODE REMELTED, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE |
| SAE AMS 5899 : 2013 | STEEL, CORROSION-RESISTANT, BARS, WIRE, AND FORGINGS, 17CR - 0.52MO (0.95 - 1.20C), POWDER METALLURGY PRODUCT, HOT ISOSTATICALLY PRESSED |
| SAE AMS 6349 : 2017 | STEEL BARS, 0.95CR - 0.20MO (0.38 TO 0.43C) (SAE 4140), NORMALIZED |
| SAE AMS 4677 : 2017 | NICKEL-COPPER ALLOY, CORROSION RESISTANT, BARS AND FORGINGS 66.5NI - 2.9AL - 30CU ANNEALED |
| SAE AMS 6487 : 2016 | STEEL, BARS, AND FORGINGS, 5.0CR - 1.3MO - 0.50V (0.38 - 0.43C) (H-11), CONSUMABLE ELECTRODE VACUUM MELTED |
| SAE AMS 5877 : 2012 | IRON ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 29FE - 22CR - 21NI - 18.5CO - 3.2MO - 2.8W - 0.78TA - 0.30AL - 0.05LA - 0.20N, SOLUTION HEAT TREATED |
| SAE AMS 6557 : 2013 | STEEL, BARS, WIRE, AND FORGINGS, 9V - 5.25CR - 1.3MO (1.80 - 1.95C), POWDER METALLURGY PRODUCT, HOT ISOSTATICALLY PRESSED |
| SAE AMS 6442 : 1987 | STEEL BARS AND FORGINGS 0.50Cr (0.98-1.10C) (SAE 50100) FOR BEARING APPLICATIONS |
| SAE AMS 6428 : 2014 | STEEL, BARS, FORGINGS, AND TUBING 0.78CR - 1.8NI - 0.35MO - 0.20V (0.32 - 0.38C) (4335 MOD) |
| SAE AMS 5616 : 2014 | STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS 13CR - 2.0NI - 3.0W ANNEALED |
| SAE AMS 5846 : 2016 | ALLOY, CORROSION AND HEAT-RESISTANT, BARS AND FORGINGS, 53NI - 15CR - 18.5CO - 5.0MO - 3.2TI - 4.2AL - 0.03B, DOUBLE VACUUM MELTED SOLUTION, STABILIZATION, AND PRECIPITATION HEAT TREATED |
| SAE AMS 6440 : 2015 | STEEL, BARS, FORGINGS, AND TUBING, 1.45CR (0.93 - 1.05C) (SAE 52100), FOR BEARING APPLICATIONS |
| SAE AMS 5926 : 2016 | STEEL, CORROSION-RESISTANT, BARS, WIRE, TUBING, AND FORGINGS 15.5CR - 1.5SI - 0.3MO - 0.1N (0.45 - 0.60C) FOR BEARING APPLICATIONS |
| SAE AMS 6525 : 2016 | STEEL, BARS, FORGINGS, TUBING, AND RINGS, 0.75CR - 9.0NI - 4.5CO - 1.0MO - 0.09V (0.17 - 0.23C), CONSUMABLE ELECTRODE VACUUM MELTED |
| SAE AMS 6559 : 2013 | STEEL, BARS, WIRE, AND FORGINGS 9.75V - 5.25CR - 1.3MO (2.40 - 2.55C) POWDER METALLURGY PRODUCT HOT ISOSTATICALLY PRESSED |
| SAE AMS 6267J: 2016 | STEEL BARS, FORGINGS, AND TUBING, 1.2CR - 3.25NI - 0.12MO (0.07 - 0.13C) (9310), ELECTROSLAG REMELTED OR CONSUMABLE ELECTRODE VACUUM REMELTED |
| SAE AMS 5719 : 2012 | STEEL BARS, WIRE, FORGINGS, TUBING, RINGS, AND EXTRUSIONS, CORROSION-RESISTANT, 11.8CR - 2.5NI - 1.8MO - 0.33V (0.08 - 0.15C), ANNEALED, VACUUM ARC OR ELECTROSLAG REMELTED |
| SAE AMS 6556 : 2013 | STEEL, BARS, WIRE, AND FORGINGS, 8V - 4CR - 4W - 3MO (2.45 - 2.55C), POWDER METALLURGY PRODUCT, HOT ISOSTATICALLY PRESSED |
| SAE AMS 5714 : 2018 | ALLOY BARS, FORGINGS, AND RINGS, CORROSION AND HEAT-RESISTANT, 73NI - 15.5CR - 2.5TI - 0.70AL - 7.0FE, PRECIPITATION-HARDENABLE |
| SAE AMS 5613 : 2013 | STEEL, CORROSION AND HEAT RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS 12.5CR (SAE 51410) ANNEALED |
| SAE AMS 5638 : 2015 | STEEL, CORROSION-RESISTANT, BARS AND FORGINGS, 0.14S - 18CR - 9.5NI - 0.50MO - 0.80AL (303MA), FREE-MACHINING; SWAGING OR UPSETTING, SOLUTION HEAT TREATED |
| SAE AMS 6422K : 2016 | STEEL, BARS, FORGINGS, AND TUBING, 0.80CR - 0.85NI - 0.20MO - 0.003B - 0.04V (0.38 - 0.43C) (MODIFIED 98BV40) |
| SAE AMS 7707 : 2018 | IRON, COMMERCIALLY PURE, BAR, SHEET, STRIP, AND PLATE HOT ROLLED, UNANNEALED |
US$57.82
Excluding Tax where applicable
USD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.