ALUMINUM ALLOY 2024, PLATE AND SHEET

Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

02-05-2015

Publisher

SAE International

1. SCOPE AND CLASSIFICATION
2. APPLICABLE DOCUMENTS
3. REQUIREMENTS
4. QUALITY ASSURANCE PROVISIONS
5. PREPARATION FOR DELIVERY
6. NOTES

Describes the specific requirements for 2024 aluminum alloy plate and sheet; the general requirements are covered in AMS-QQ-A-250.

Committee	AMS-D
DevelopmentNote	Supersedes QQ A 250/4 (E) (05/2004)
DocumentType	Standard
Pages	7
ProductNote	This version is now stabilised
PublisherName	SAE International
Status	Current

MIL-PRF-7907 Revision C:2007	Cleaning Compound, Decontaminating (for Soiled and Radioactive Contaminated Surfaces)
SAE AMS 3240 : 2011	CHLOROPRENE (CR) RUBBER, WEATHER RESISTANT, 35-45
MIL-PRF-32239 Revision A:2014	COATING SYSTEM, ADVANCED PERFORMANCE, FOR AEROSPACE APPLICATIONS
SAE AMS 3166 : 2014	SOLVENTS, CLEANING, CLEANING PRIOR TO APPLICATION OF SEALING COMPOUNDS
SAE AS 4723 : 2012	INSERT, SCREW THREAD, SELF-LOCKING, UNS S66286, KEY LOCKED, PLASTIC SELF LOCKING DEVICE, SOLID FILM LUBRICANT, PROCUREMENT SPECIFICATION FOR
MIL-DTL-4339 Revision E:2009	CORROSION PREVENTIVE, SOLUBLE OIL FOR WATER INJECTION SYSTEMS (NATO CODE NUMBER C-630)
MIL-PRF-32405 Base Document:2013	CLEANER, HAND WIPE, FOR AVIATION AND MISSILE SYSTEMS, METALLIC SUBSTRATES, LOW OR EXEMPT VOC
MIL-PRF-81309 Revision G:2014	CORROSION PREVENTIVE COMPOUNDS, WATER DISPLACING, ULTRA-THIN FILM
SAE AMS 1640 : 2011	CORROSION REMOVING COMPOUND, FOR AIRCRAFT SURFACES
SAE AS 1241 : 2016	FIRE RESISTANT PHOSPHATE ESTER HYDRAULIC FLUID FOR AIRCRAFT
SAE AS 4976 : 2012	Insert, Screw Thread, Non-Locking, UNS S66286, Locked in, Key Locked, Procurement Specification for(STABILIZED Mar 2019)
SAE AMS 3144 : 2012	PRIMER, ANODIC ELECTRODEPOSITION FOR AIRCRAFT APPLICATIONS
ASTM F 1110 : 2009	Standard Test Method for Sandwich Corrosion Test
MIL-DTL-83513 Revision G:2008	Connectors, Electrical, Rectangular, Microminiature, Polarized Shell, General Specification for
MIL-DTL-83454 Revision B:2016	TERMINALS, STUD, BLIND PLATE, FOR ELECTRICAL BONDING AND GROUNDING (NONINSULATED)
MS35759 Revision C:2008	CUPS, GREASE, AUTOMATIC FEED
P-W-2891 Revision A:2002	WIPE SOLVENTS, EXEMPT AND NON-EXEMPT
BS IEC 63004:2015	Standard for receiver fixture interface
SAE AMS P 5510 : 2013	O-RING, PREFORMED, STRAIGHT THREAD TUBE FITTING BOSS, TYPE 1 HYDRAULIC (-65 TO 160 DEGREES F)
MIL-PRF-85570 Revision E:2012	CLEANING COMPOUNDS, AIRCRAFT, EXTERIOR
MIL-DTL-81716 Revision A:2009	PACKING, PREFORMED, STRAIGHT THREADED TUBE FITTING BOSS, TYPE 2 HYDRAULIC (-65 DEGREES F TO +275 DEGREES F)
MIL-PRF-23377 Revision K:2012	PRIMER COATINGS: EPOXY, HIGH-SOLIDS
SAE AS 6449 : 2017	SOLID FILM LUBRICANT
MIL-PRF-81705 Revision E:2009	Barrier Materials, Flexible, Electrostatic Discharge Protective, Heat-Sealable
SAE AMS 3603 : 2002	PROTECTIVE FILM, HIGH PERFORMANCE, POLYMERIC PRESSURE SENSITIVE ADHESIVE, FOR AIRCRAFT EXTERIOR APPLICATIONS
SAE AMS C 7438 : 2014	CORE MATERIAL, ALUMINUM, FOR SANDWICH CONSTRUCTION
IEC 63004:2015	Standard for receiver fixture interface
SAE AMS 3167 : 2005	SOLVENTS, WIPE FOR CLEANING PRIOR TO APPLICATION OF PRIMER AND TOP COAT MATERIALS, OR SEALING COMPOUNDS
SAE AMS 3100 : 2013	ADHESION PROMOTER FOR POLYSULFIDE SEALING COMPOUNDS
MIL-PRF-6864 Revision F:2010	CLEANING COMPOUND, SOLVENT, OIL COOLER
SAE AS 4892 : 2012	INSERT, SCREW THREAD, SELF-LOCKING, UNS S66286, LOCKED IN, KEY LOCKED, PROCUREMENT SPECIFICATION FOR
MIL-PRF-85285 Revision E:2012	COATING: POLYURETHANE, AIRCRAFT AND SUPPORT EQUIPMENT
MIL-PRF-32295 Revision B:2017	CLEANER, NON-AQUEOUS, LOW-VOC, HAP-FREE
SAE AMS R 7362 : 2012	NITRILE RUBBER, SYNTHETIC, SOLID, SHEET, STRIP AND FABRICATED PARTS, SYNTHETIC OIL RESISTANT
ASTM F 1110 : 2009 : R2014	Standard Test Method for Sandwich Corrosion Test
MIL-STD-186 Revision F:2002	PROTECTIVE FINISHING SYSTEMS FOR ROCKETS, GUIDED MISSILES, SUPPORT EQUIPMENT AND RELATED MATERIALS
SAE AMS 3604 : 2015	HEAT RESISTANT ALUMINIZED PAINT
MIL-PRF-29602 Revision A:2005	CLEANING COMPOUNDS, PARTS WASHER AND SPRAY CABINET
MIL-DTL-5516 Revision D:2008	Packing, Preformed, Petroleum Hydraulic Fluid Resistant, 160 Degrees F (71 Degrees C)
MIL-PRF-32597 Base Document:2018	CLEANER, POLYMER AND POLYMER MATRIX COMPOSITE (PMC) MATERIAL, NON-AQUEOUS, HAP-FREE
SAE AMS 3241 : 2011	CHLOROPRENE (CR) RUBBER, WEATHER RESISTANT, 55-65
SAE AS 5887 : 2014	INSERT, SCREW THREAD, SELF-LOCKING, UNS S66286, LOCKED IN, KEY LOCKED PROCUREMENT SPECIFICATION FOR
SAE AMS 3143 : 2016	POWDER COATING MATERIAL
MIL-DTL-5521 Revision C:2007	Washer, Aircraft Hydraulic Packing Back-Up
MIL-DTL-83488 Revision D:1999	COATING, ALUMINUM, HIGH PURITY
MIL-PRF-85582 Revision E:2012	PRIMER COATINGS: EPOXY, WATERBORNE
SAE AMS 3242 : 2011	CHLOROPRENE (CR) RUBBER, WEATHER RESISTANT, 75-85
MIL-PRF-32587 Base Document:2018	Remover, Paint, Hap-Free, Neutral
MIL-DTL-85054 Revision D:2010	CORROSION PREVENTIVE COMPOUND, WATER-DISPLACING, TRANSPARENT (FORMERLY AMLGUARD)
SAE AMS 3092 : 2015	RELEASE AGENT, FOR USE DURING FORM-IN-PLACE GASKET PREPARATION