SAE AMS QQ S 763D : 2013(S2015)
Current
Current
The latest, up-to-date edition.
STEEL, CORROSION RESISTANT, BARS, WIRE, SHAPES, AND FORGINGS
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
03-02-2015
Publisher
1. SCOPE AND CLASSIFICATION
2. APPLICABLE DOCUMENTS
3. REQUIREMENTS
4. QUALITY ASSURANCE PROVISIONS
5. PACKAGING
6. NOTES
This specification covers corrosion-resistant steel bars, wire, shapes, and forgings.
| Standards | Relationship |
| QQ-S-763 Revision F:1996 | Similar to |
| SAE AS 4468 G : 2017 | HOSE ASSEMBLY, 125 PSI, LINED SILICONE, POTABLE WATER, PROCUREMENT SPECIFICATION |
| MIL-DTL-24704 Revision B:2011 | Flanges, Four-Bolt, Square, for Hydraulic Systems, General Specification for |
| MIL-DTL-3922-75 Revision D:2013 | Flanges, Waveguide, Reduced Height |
| AN915 Revision 14:2015 | ELBOW, PIPE, 45 DEGREES |
| MIL-DTL-23971 Revision E:2017 | POWER DIVIDERS, POWER COMBINERS, AND POWER DIVIDER/COMBINERS, GENERAL SPECIFICATION FOR |
| 17/30369678 DC : 0 | PREN 7010 - AEROSPACE SERIES - USER GUIDE FOR CREATION AND DESIGNATION OF BOLTS |
| MS27086 Revision D:2013 | Elbow, Nipple End, Flared, Tube to Hose - 90 Degrees Swivel Nut |
| MS27087 Revision D:2013 | Elbow, Nipple End, Flared, Tube to Hose - 45 Degrees Swivel Nut |
| MIL-DTL-15743-9 Revision C:2007 | SWITCHES, ROTARY, ENCLOSED, SUBMERSIBLE (15 FEET), SNAP ACTION, 500 VOLTS ALTERNATING CURRENT/250 VOLTS DIRECT CURRENT, 30 AMPERE, SYMBOLS 839.1 (4PDT), 848.1 (TPDT), AND 2752.1 (SPECIAL) |
| MIL-DTL-3655 Revision D:2004 | Connector, Plug and Receptacle, Electrical (Coaxial, Series Twin), and Associated Fittings, General Specification for |
| BS ISO 7169:2014 | Aerospace. Separable tube fittings for fluid systems, for 24° cones, for pressures up to 3 000 psi or 21 000 kPa. Procurement specification, inch/metric |
| AN849 Revision 13:2015 | NIPPLE, HOSE |
| AN838 Revision 9:2011 | Elbow, Tube to Hose, 90 Degrees |
| SAE AS18280H:2021 | Fittings, 24 Degree Cone Flareless, Fluid Connection, 3000 psi |
| MS27077 Revision D:2014 | FLANGE, SWIVEL, RETAINING |
| AN815 Revision 10:2015 | UNION - FLARED TUBE |
| MS27076 Revision E:2013 | Nipple, Straight, Swivel Flange |
| AN846 Revision 9:2013 | ELBOW, HOSE, 45 DEGREES |
| MIL-DTL-16356 Revision E:2013 | GAUGES, DIRECT READING, OBLONG GLASS |
| MIL-PRF-23145 Revision C:2018 | Inflation Assemblies, Life Preserver |
| MIL-DTL-3922-67 Revision E:2013 | Flanges, Waveguide (Contact) (Round, 4 Hole) (Millimeter) |
| PREN 3778 : 200P1 | AEROSPACE SERIES - PINS, QUICK RELEASE, TWO BALLS, DOUBLE ACTING, SINGLE LOCKING, "L" TYPE HANDLE, IN CORROSION RESISTING STEEL |
| PREN 6068 : 200P2 | AEROSPACE SERIES - PIN, QUICK RELEASE, SELF-RETAINING, POSITIVE LOCKING, SINGLE ACTING, BUTTON HANDLE |
| SAE AS 4623 : 2016 | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, PARA-ARAMID REINFORCED, 3,000 PSI, 275 DEGREES F, HEAVY DUTY, AIRCRAFT HYDRAULIC SYSTEMS |
| NASM 21083 : 2004 | NUT, SELF-LOCKING, HEXAGON, NON-METALLIC INSERT, LOW HEIGHT, 250 DEGREES F |
| SAE AS 50151 : 2015 | CONNECTORS, ELECTRICAL, CIRCULAR THREADED, AN TYPE, GENERAL SPECIFICATION FOR |
| ASTM F 2332 : 2006 | Standard Specification for Annular Ball Bearings for Instruments and Precision Rotating Components |
| SAE AS 95234A : 2020 | CONNECTORS, ELECTRICAL, REVERSE BAYONET, GENERAL SPECIFICATION FOR |
| MIL-DTL-45952 Revision A:2014 | PIN, QUICK-RELEASE, DETENT GENERAL SPECIFICATION FOR |
| MIL-DTL-87104 Revision C:2014 | COAXIAL ASSEMBLIES, GENERAL SPECIFICATION FOR |
| MIL-DTL-24694 Revision A:2011 | VALVE, HYDRAULIC RELIEF, 1.5 - 35 BARS (22 - 500 POUNDS PER SQUARE INCH) CARTRIDGE TYPE, GENERAL SPECIFICATION FOR (METRIC) |
| MIL-DTL-25579 Revision H:2014 | Hose Assembly, Polytetrafluoroethylene, High Temperature, Medium Pressure, General Specification for |
| MIL-STD-2003-4 Revision A:2009 | ELECTRIC PLANT INSTALLATION STANDARD METHODS FOR SURFACE SHIPS AND SUBMARINES (CABLEWAYS) |
| A-A-59590 Revision D:2014 | HOLDER, ELECTRICAL CARD, WEDGE RETAINERS, 3 PIECE, FOR COLD PLATE APPLICATIONS, GENERAL REQUIREMENTS FOR |
| MIL-DTL-11996 Revision C:2015 | HANDSETS, GENERAL SPECIFICATION FOR |
| MIL-DTL-55041 Revision F:2012 | Switches, Waveguide, General Specification for |
| A-A-59789 Revision B:2014 | HOLDER, ELECTRICAL CARD, WEDGE RETAINERS, 5 PIECE, FOR COLD PLATE APPLICATIONS, GENERAL REQUIREMENTS FOR |
| MS27082 Revision E:2014 | ELBOW, NIPPLE END, SWIVEL FLANGE TO HOSE - 90 DEGREES |
| AN841 Revision 7:2013 | ADAPTER - HOSE TO FLARED TUBE |
| MIL-C-83522-1 Revision F:2006 | CONNECTOR, PLUG, FIBER OPTIC, SINGLE TERMINUS, THREADED, (STEP-DOWN NOSE INTERFACE), LENSLESS, EPOXY, FOR 50/125 MICROMETER, 62.5/125 MICROMETER, AND 100/140 MICROMETER |
| BS IEC 63004:2015 | Standard for receiver fixture interface |
| MIL-DTL-24749 Revision B:2014 | GROUNDING STRAPS AND BOSSES, ELECTROMAGNETIC |
| MIL-C-83522-7 Revision C:2006 | CONNECTOR, RECEPTACLE, FIBER OPTIC, SINGLE TERMINUS, THREADED, PARALLEL PC MOUNT |
| A-A-59950 Base Document:2014 | HOLDER, ELECTRICAL CARD, WEDGE RETAINERS, 7 BODY, FOR COLD PLATE APPLICATIONS, GENERAL REQUIREMENTS FOR |
| MIL-DTL-24695 Revision C:2012 | VALVE, HOSE ASSEMBLY, AND ADAPTER, VENT AND TEST HYDRAULIC SERVICE, GENERAL SPECIFICATION FOR |
| MIL-DTL-28837 Revision D:2015 | MIXER STAGES, RADIO FREQUENCY GENERAL SPECIFICATION FOR |
| AN844 Revision 13:2013 | ELBOW - PIPE TO HOSE, 45 DEGREES |
| MIL-DTL-83522-16 Revision C:2013 | Connector, Fiber Optic, Single Terminus, Plug, Bayonet Coupling (ST Style), 2.5 Millimeters Diameter Ferrule, Epoxy |
| AN807 Revision 7:2007 | Adapter, Straight, Tube to Hose |
| MIL-DTL-28754 Revision E:2016 | Connectors, Electrical, Modular, and Component Parts General Specification for |
| PREN 3776 : 200P1 | AEROSPACE SERIES - PINS, QUICK RELEASE, TWO BALLS, SINGLE ACTING, SINGLE LOCKING, "L" TYPE HANDLE, IN CORROSION RESISTING STEEL |
| SAE AS 620 : 2012 | HOSE ASSEMBLIES, CONVOLUTED POLYTETRAFLUOROETHYLENE METALLIC REINFORCED, HIGH TEMPERATURE, MEDIUM PRESSURE, AIRCRAFT |
| SAE ARP 81490 : 2016 | TRANSMISSION LINES, TRANSVERSE ELECTROMAGNETIC MODE |
| SAE AS 1975 : 2016 | Hose Assembly, Polytetrafluoroethylene, Para-Aramid Reinforced, 3000/4000 psi, 275 °F, Standard Duty, Hydraulic, Aircraft Systems |
| IEC 63004:2015 | Standard for receiver fixture interface |
| MIL-DTL-5015 Revision H:2000 | CONNECTORS, ELECTRICAL, CIRCULAR THREADED, AN TYPE - GENERAL SPECIFICATION FOR |
| DSCC 84103 : J | HOLDER, ELECTRICAL CARD, WEDGE RETAINER, 3-PIECE, SCREW ACTUATED |
| MIL-STD-186 Revision F:2002 | PROTECTIVE FINISHING SYSTEMS FOR ROCKETS, GUIDED MISSILES, SUPPORT EQUIPMENT AND RELATED MATERIALS |
| MIL-DTL-26482 Revision H:2007 | Connectors, Electrical, Circular, Miniature, Quick Disconnect, Environment Resisting, Receptacles and Plugs, General Specification for |
| MS27075 Revision D:2013 | NIPPLE, FLARED, TUBE TO HOSE - SWIVEL NUT |
| MS27071 Revision D:2013 | UNION, NIPPLE |
| MIL-DTL-15370 Revision K:2015 | COUPLERS, DIRECTIONAL, GENERAL SPECIFICATION FOR |
| MIL-DTL-3928 Revision H:2016 | SWITCHES, RADIO-FREQUENCY TRANSMISSION LINE, (COAXIAL AND MICROSTRIP), GENERAL SPECIFICATION FOR |
| SAE AMS P 5510 : 2013 | O-RING, PREFORMED, STRAIGHT THREAD TUBE FITTING BOSS, TYPE 1 HYDRAULIC (-65 TO 160 DEGREES F) |
| AN842 Revision 13:2013 | ELBOW - PIPE TO HOSE, 90 DEGREES |
| MIL-DTL-55116 Revision D:2013 | CONNECTORS: MINIATURE AUDIO, FIVE-PIN AND SIX-PIN - GENERAL SPECIFICATION FOR |
| MIL-DTL-12520 Revision D:2005 | Connectors, Plug and Receptacle (Electrical, Waterproof), and Accessories; General Specification for |
| MIL-DTL-2 Revision G:2006 | VALVES, CYLINDER, GAS (FOR COMPRESSED OR LIQUEFIED GASES), GENERAL SPECIFICATION FOR |
| AN914 Revision 11:2012 | ELBOW, PIPE, INTERNAL AND EXTERNAL THREAD, 90 DEGREES |
| PREN 6067 : 200P2 | AEROSPACE SERIES - PIN, QUICK RELEASE, SELF-RETAINING, POSITIVE LOCKING, DOUBLE ACTING, BUTTON HANDLE |
| SAE AS 604 : 2012 | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, METALLIC REINFORCED, 3000 PSI, 400 DEGREES F, HEAVYWEIGHT, HYDRAULIC |
| SAE AS 22227 : 2014(S2018) | BEARING, BALL, ANNULAR, GENERATOR AND MOTOR GENERATOR |
| SAE J 24714 : 2001 | Fluid Systems—Connector Tubes—General Specification and Part Standard |
| DSCC 85116 : D | CONTACT ASSEMBLY, ELECTRICAL |
| N291-15 | Requirements for safety-related structures for nuclear power plants |
| SAE AS 614 : 2017 | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, METALLIC REINFORCED, 4000 PSI, 400 DEGREES F, HEAVY DUTY, HYDRAULIC AND PNEUMATIC |
| SAE AS 5420 : 2017 | HOSE ASSEMBLY, HEATED, 125 PSIG, LINED SILICONE, POTABLE WATER, PROCUREMENT SPECIFICATION |
| NASA SSTD 8070 0122 : 2014 | PROCEDURE FOR GTAW OF 625 ALLOY TO 300 SERIES STAINLESS STEEL |
| MIL-C-83522-4 Revision F:2006 | CONNECTOR, RECEPTACLE, FIBER OPTIC, SINGLE TERMINUS, THREADED, RECEPTACLE, LOW PROFILE PARALLEL PC MOUNT |
| MIL-DTL-38394 Revision E:2009 | Transmitter, Pressure TRU-81/A, Oil, 0-500 PSI |
| MIL-DTL-55074 Revision G:2013 | Connectors, Plug and Receptacle, Telephone, Electrical, Subassembly and Accessories and Contact Assembly, Electrical, General Specification for |
| MIL-DTL-26500 Revision G:2011 | CONNECTORS, GENERAL PURPOSE, ELECTRICAL, MINIATURE, CIRCULAR, ENVIRONMENT RESISTING OR HERMETICALLY SEALED, GENERAL SPECIFICATION FOR |
| MIL-DTL-83517 Revision B:2015 | Connector, Coaxial, Radio Frequency for Coaxial, Strip or Microstrip Transmission Line General Specification for |
| MIL-DTL-83522 Revision E:2013 | Connectors, Fiber Optic, Single Ferrule, General Specification for |
| AN848 Revision 13:2015 | Elbow, Hose, 90 Degree |
| AN 840 : 0011 | ADAPTER, STRAIGHT, PIPE TO HOSE |
| AN 839 : 0009 | ELBOW, TUBE TO HOSE, 45 DEGREES |
| MIL-C-83522-3 Revision G:2006 | CONNECTOR, ADAPTER, FIBER OPTIC, BULKHEAD MOUNT, FOR SINGLE FIBER |
| MIL-C-83522-5 Revision E:2006 | CONNECTOR, RECEPTACLE, FIBER OPTIC, BULKHEAD MOUNT, FOR SINGLE FIBER |
| MS27394 Revision C:2014 | ELBOW, FLARELESS, TUBE TO HOSE - 90 DEGREE SWIVEL NUT |
| SAE AS 1424 : 2014 | HOSE ASSEMBLIES, METAL, MEDIUM PRESSURE, HIGH TEMPERATURE |
| SAE AS 1339 : 2017 | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, METALLIC REINFORCED, 3000 PSI, 400 DEGREES F, LIGHTWEIGHT, HYDRAULIC AND PNEUMATIC |
| SAE AS 81969 : 2016 | INSTALLING AND REMOVAL TOOLS, CONNECTOR ELECTRICAL CONTACT, GENERAL SPECIFICATION FOR |
| ASTM F 2332 : 2006 : R2013 | Standard Specification for Annular Ball Bearings for Instruments and Precision Rotating Components |
| ISO 7169:2014 | Aerospace Separable tube fittings for fluid systems, for 24 degree cones, for pressures up to 3 000 psi or 21 000 kPa Procurement specification, inch/metric |
| MIL-DTL-24630 Revision A:2014 | VALVES, CHECK, IN-LINE, FOR HYDRAULIC FLUID AND LUBRICATING OIL FLUID, GENERAL SPECIFICATION FOR |
| MIL-DTL-23928 Revision G:2014 | PANELS, ELECTRICAL, POWER DISTRIBUTION AND MANUAL TRANSFER, CIRCUIT BREAKER TYPE |
| SAE AIR 5693 : 2014 | COMPATIBILITY OF PTFE HOSE ASSEMBLIES WITH TYPICAL FLUIDS FOUND IN AEROSPACE APPLICATIONS |
| MIL-DTL-24215 Revision E:2015 | ATTENUATORS, VARIABLE (COAXIAL), GENERAL SPECIFICATION FOR |
| MIL-DTL-24578 Revision C:2015 | Valves, Globe, Pressure Instrument, Stem Test Connection, Union End |
| MIL-PRF-26626 Revision F:2008 | HOSE ASSEMBLY, REINFORCED, CRYOGENIC, OXYGEN |
| MIL-DTL-28875 Revision C:2012 | Amplifiers, Radio-Frequency and Microwave, Solid-State, General Specification for |
| MIL-DTL-43695 Revision C:2000 | FRAME SECTIONS, TENT, FRAME TYPE, EXPANDABLE |
| MS27084 Revision D:2014 | ELBOW, NIPPLE END, SWIVEL FLANGE TO HOSE - 45 DEGREES |
| MIL-C-83522-8 Revision C:2006 | CONNECTOR, RECEPTACLE, FIBER OPTIC, SINGLE TERMINUS, THREADED, BULKHEAD, HEX NUT MOUNT |
| MIL-C-83522-2 Revision G:2006 | CONNECTOR, PLUG, FIBER OPTIC, SINGLE TERMINUS, THREADED, (STRAIGHT NOSE INTERFACE), LENSLESS, EPOXY, FOR 50/125 MICROMETER, 62.5/125 MICROMETER, AND 100/140 MICROMETER |
| SAE AS 85049 : 2016 | CONNECTOR ACCESSORIES, ELECTRICAL GENERAL SPECIFICATION FOR |
| SAE AS 95234 : 2014 | CONNECTORS, ELECTRICAL, REVERSE BAYONET, GENERAL SPECIFICATION FOR |
| ASTM A 262 : 2015 : REDLINE | Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels |
| MIL-H-6875 Revision H:1989 | HEAT TREATMENT OF STEEL RAW MATERIALS |
| FED-STD-123 Revision H:2007 | MARKING FOR SHIPMENT (CIVIL AGENCIES) |
| MIL-STD-163 Revision C:1978 | STEEL MILL PRODUCTS PREPARATION FOR SHIPMENT AND STORAGE |
| FED-STD-183 Revision C:1980 | CONTINUOUS IDENTIFICATION MARKING OF IRON AND STEEL PRODUCTS |
US$141.60
Excluding Tax where applicable
USD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.