SAE AS 45909 : 2015

Withdrawn

View Superseded by

STUD, LOCKED IN, RING LOCKED, SERRATED, GENERAL SPECIFICATION FOR

Available format(s)

Hardcopy , PDF

Withdrawn date

12-06-2015

Language(s)

English

Published date

01-01-2015

Publisher

SAE International

1. SCOPE
2. APPLICABLE DOCUMENTS
3. REQUIREMENTS
4. QUALITY ASSURANCE PROVISIONS
5. PACKAGING
6. NOTES

Specifies the requirements for locked-in studs.

Committee	E-25
DocumentType	Standard
Pages	25
PublisherName	SAE International
Status	Withdrawn
SupersededBy	NASM45909:2016

SAE AMS 5663 : 2016	NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS 52.5NI - 19CR - 3.0MO - 5.1CB (NB) - 0.90TI - 0.50AL - 18FE CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED 1775 DEGREES F (968 DEGREES C) SOLUTION AND PRECIPITATION HEAT TREATED
SAE AMS 5737 : 2012	STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS AND TUBING, 15CR - 25.5NI - 1.2MO - 2.1TI - 0.006B - 0.30V, CONSUMABLE ELECTRODE MELTED, 1650 DEGREES F (899 DEGREES C), SOLUTION AND PRECIPITATION HEAT TREATED
SAE AMS QQ P 416 : 2016	PLATING, CADMIUM (ELECTRODEPOSITED)
SAE AMS 5662 : 2016	NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS 52.5NI - 19CR - 3.0MO - 5.1CB (NB) - 0.90TI - 0.50AI - 18FE CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED 1775 DEGREES F (968 DEGREES C) SOLUTION HEAT TREATED, PRECIPITATION-HARDENABLE
SAE AMS 6322 : 2014	STEEL BARS, FORGINGS, AND RINGS, 0.50CR - 0.55NI - 0.25MO (0.38 - 0.43C) (SAE 8740)
SAE AMS 2488 : 2000	ANODIC TREATMENT - TITANIUM AND TITANIUM ALLOYS SOLUTION PH 13 OR HIGHER
MIL-STD-2073-1 Revision E:2008	STANDARD PRACTICE FOR MILITARY PACKAGING
ASME B46.1 : 2009	SURFACE TEXTURE (SURFACE ROUGHNESS, WAVINESS, AND LAY)
SAE AS 51989 : 2016	STUD, LOCKED IN-RING LOCKED, SERRATED
SAE AMS 4965 : 2014	TITANIUM ALLOY, BARS, WIRE, FORGINGS, AND RINGS, 6.0AL 4.0V, SOLUTION HEAT TREATED AND AGED
SAE AMS 5734 : 2012	STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, AND TUBING, 15CR - 25.5NI - 1.2MO - 2.1TI - 0.006B - 0.30V, CONSUMABLE ELECTRODE MELTED, 1650 DEGREES F (899 DEGREES C) SOLUTION HEAT TREATED
SAE AMS 5732 : 2012	STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING AND RINGS, 15CR - 25.5NI - 1.2MO - 2.1TI - 0.006B - 0.30V, CONSUMABLE ELECTRODE MELTED 1800 DEGREES F (982 DEGREES C), SOLUTION AND PRECIPITATION HEAT TREATED
NASM1312-6:2013	FASTENER TEST METHODS, METHOD 6, HARDNESS
FED-STD-H28-2 Revision B:1991	Screw-Thread Standards for Federal Services Section 2 Unified Inch Screw Threads- UN and UNR Thread Forms
SAE AS 8879 : 2004	SCREW THREADS - UNJ PROFILE, INCH CONTROLLED RADIUS ROOT WITH INCREASED MINOR DIAMETER
SAE AMS 2401 : 2013	PLATING, CADMIUM, LOW HYDROGEN CONTENT DEPOSIT
SAE AMS H 81200 : 2014	HEAT TREATMENT OF TITANIUM AND TITANIUM ALLOYS
SAE AMS 5731 : 2012	STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 15CR - 25.5NI - 1.2MO - 2.1TI - 0.006B - 0.30V, CONSUMABLE ELECTRODE MELTED, 1800 DEGREES F (982 DEGREES C) SOLUTION HEAT TREATED
MS51995 Revision D:2015	FASTENERS, RING LOCKED INSERTS AND STUDS, INSTALLATION AND REPLACEMENT OF
SAE AS 51997 : 2013	RING, LOCKED, SERRATED-HIGH STRENGTH
ASTM E 1444 : 2005	Standard Practice for Magnetic Particle Testing
MS51497 Base Document:1985	STUD, LOCKED-IN, RING-LOCKED,SERRATED HIGH STRENGTH, OVERSIZE REPLACER
SAE AS 51990 : 2016	RING, LOCK, SERRATED
SAE AMS 2700E : 2011	PASSIVATION OF CORROSION RESISTANT STEELS
MS51994 Revision A:1988	HOLE PREPARATION - RING LOCKED INSERTS AND STUDS, STANDARD DIMENSIONS FOR
SAE AMS 6370 : 2016	STEEL, BARS, FORGINGS, AND RINGS, 0.95CR - 0.20MO (0.28 - 0.33C) (SAE 4130)
FED-STD-H28-20 Revision B:1994	SCREW THREAD STANDARDS FOR FEDERAL SERVICES, SECTION 20, INSPECTION METHODS FOR ACCEPTABILITY OF UN, UNR, UNJ, M, AND MJ SCREW THREADS
SAE AMS 4967 : 2014	TITANIUM ALLOY, BARS, WIRE, FORGINGS, AND RINGS 6.0AL - 4.0V ANNEALED, HEAT TREATABLE
NASM 1312-8 : 2001	FASTENER TEST METHODS, METHOD 8, TENSILE STRENGTH
SAE AS 51992 : 2016	STUD, LOCKED IN-RING, SERRATED, HIGH STRENGTH