Hose Assembly, Polytetrafluoroethylene, Para Aramid Reinforced Heavy-Duty, 21 000 kPa, 135 °C, Aircraft Hydraulic Systems, Metric

Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

08-21-2015

Publisher

SAE International

1 SCOPE
2 APPLICABLE DOCUMENTS
3 TECHNICAL REQUIREMENTS
4 QUALITY ASSURANCE PROVISIONS
5 PREPARATION FOR DELIVERY
6 NOTES

This document defines the requirements for heavy-duty hose assemblies suitable for use in 21 000 kPa, 135 °C aircraft systems where rapid rate pressure pulsing and torsional/longitudinal flexing may occur in addition to normal hydraulic system loading.

Committee	G-3
DocumentType	Standard
Pages	24
PublisherName	SAE International
Status	Current
Supersedes	SAE MA 4623 : 1994

SAE AMS 2486 : 2010	CONVERSION COATING OF TITANIUM ALLOYS FLUORIDE-PHOSPHATE TYPE
SAE MA 4624 : 2015	HOSE ASSEMBLY, PTFE, PARA ARAMID REINFORCED, HEAVY-DUTY 21000 kPa, 135 DEG C, FLARELESS, TITANIUM FITTINGS, JUMP SIZES, STRAIGHT TO STRAIGHT, METRIC
SAE AMS5659S : 2016	Steel, Corrosion-Resistant, Bars, Wire, Forgings, Rings, and Extrusions 15Cr - 4.5Ni - 0.30Cb (Nb) - 3.5Cu<br>
SAE AMS 5645 : 2016	STEEL, CORROSION AND HEAT RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 18CR - 10NI - 0.40TI (321), SOLUTION HEAT TREATED
SAE ARP 1835 : 2013	PREPARATION FOR DELIVERY, GENERAL REQUIREMENTS FOR HOSE ASSEMBLIES
SAE ARP 603 : 1985	IMPULSE TESTING OF HYDRAULIC HOSE, TUBING, AND FITTING ASSEMBLIES
SAE AS 611F : 2010	HOSE ASSEMBLY AND TUBING, POLYTETRAFLUOROETHYLENE, CLEANING METHODS FOR
ASTM A 262 : 2015 : REDLINE	Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels
MIL-STD-130 Revision N:2007	IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY
QQ-P-35 Revision C:1988	PASSIVATION TREATMENTS FOR CORROSION-RESISTANT STEEL
ASTM B 348 : 2013 : REDLINE	Standard Specification for Titanium and Titanium Alloy Bars and Billets
SAE MA 4627 : 2015	HOSE ASSEMBLY, PTFE, PARA ARAMID REINFORCED, HEAVY-DUTY 21000 kPa, 135 DEG C, FLARELESS, TITANIUM FITTINGS, JUMP SIZES, 45 TO 45 DEGREES, METRIC
SAE MA 2014 : 2015	FITTING END, ACORN FLARELESS, DESIGN STANDARD, METRIC
SAE MA 4626 : 2015	HOSE ASSEMBLY, PTFE, PARA ARAMID REINFORCED, HEAVY-DUTY 21000 kPa, 135 DEG C, FLARELESS, TITANIUM FITTINGS, JUMP SIZES, STRAIGHT TO 90 DEGREES, METRIC
SAE MA 2002 : 2013	IMPULSE TESTING OF HYDRAULIC HOSE, TUBING AND FITTING ASSEMBLIES
MIL-T-8808 Revision B:1981	TUBING, STEEL, CORROSION RESISTANT (18.8 STABILIZED) AIRCRAFT HYDRAULIC QUALITY
SAE AMS 5571J:2012(R2018)	STEEL, CORROSION AND HEAT-RESISTANT, SEAMLESS TUBING, 18CR - 10.5NI - 0.70CB (NB) (347), SOLUTION HEAT TREATED
SAE AMS 5643 : 2016	STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, MECHANICAL TUBING, AND RINGS, 16CR - 4.0NI - 0.30CB (NB) - 4.0CU, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE
SAE AS 1055 : 2013	FIRE TESTING OF FLEXIBLE HOSE, TUBE ASSEMBLIES, COILS, FITTINGS AND SIMILAR SYSTEM COMPONENTS
SAE AS 1073B : 2013(S2019)	SLEEVE HOSE ASSEMBLY, HEAT SHRINKABLE
SAE MA 2096 : 2015	FITTING END, 24 DEGREES CONE, BULKHEAD, DESIGN STANDARD, METRIC
SAE AMS 5647 : 2017	STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, MECHANICAL TUBING, AND RINGS, 19CR - 9.5NI, SOLUTION HEAT TREATED
SAE MA 2273 : 2015	FITTING END, BEAM SEAL, EXTERNAL THREAD, DESIGN STANDARD, METRIC
SAE ARP 908 : 2013	TORQUE REQUIREMENTS, INSTALLATION AND QUALIFICATION TEST, HOSE AND TUBE FITTING
SAE AMS 4965 : 2014	TITANIUM ALLOY, BARS, WIRE, FORGINGS, AND RINGS, 6.0AL 4.0V, SOLUTION HEAT TREATED AND AGED
SAE MA 2095 : 2015	FITTING END, 24 DEGREES CONE, DESIGN STANDARD, METRIC
MIL-STD-831 Base Document:1963	TEST REPORTS, PREPARATION OF
SAE AMS 5567 : 2015	STEEL, CORROSION RESISTANT, SEAMLESS OR WELDED HYDRAULIC TUBING, 19CR - 10NI (304), SOLUTION HEAT TREATED
SAE MA 2274 : 2015	FITTING END, BEAM SEAL, BULKHEAD, EXTERNAL THREAD, DESIGN STANDARD, METRIC
SAE AIR 1228 : 2009	STANDARD IMPULSE MACHINE EQUIPMENT AND OPERATION
SAE AS 4265 : 2013	IMPULSE TESTING OF HYDRAULIC TUBING AND FITTINGS, S-N CURVE
SAE AMS 5637 : 2012	STEEL, CORROSION RESISTANT, BARS AND WIRE 18CR - 9.0NI (SAE 30302) SOLUTION HEAT TREATED, COLD DRAWN AND STRESS RELIEVED 125 KSI (862 MPA) TENSILE STRENGTH
SAE AMS 5646 : 2014	STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 18CR - 11NI - 0.60CB(NB) (347), SOLUTION HEAT TREATED
MIL H 83282 : C	HYDRAULIC FLUID, FIRE RESISTANT, SYNTHETIC HYDROCARBON BASE, AIRCRAFT, METRIC, NATO CODE NUMBER H 537
SAE MA 1370 : 2012	SCREW THREADS - MJ PROFILE, METRIC
SAE MA 4625 : 2015	HOSE ASSEMBLY, PTFE, PARA ARAMID REINFORCED, HEAVY-DUTY 21000 kPa, 135 DEG C, FLARELESS, TITANIUM FITTINGS, JUMP SIZES, STRAIGHT TO 45 DEGREES, METRIC
SAE AMS 4945 : 2014	TITANIUM ALLOY TUBING, SEAMLESS, HYDRAULIC 3AL - 2.5V, CONTROLLED CONTRACTILE STRAIN RATIO COLD WORKED, STRESS RELIEVED
SAE AS 1072F : 2013(S2019)	SLEEVE, HOSE ASSEMBLY, FIRE PROTECTION
SAE MA 4628 : 2015	HOSE ASSEMBLY, PTFE, PARA ARAMID REINFORCED, HEAVY-DUTY, 21 000 KPA, 135 °C, FLARELESS, TITANIUM FITTINGS, JUMP SIZES, 45° TO 90°, METRIC
SAE AMS 5575 : 2013	STEEL, CORROSION AND HEAT-RESISTANT, WELDED TUBING, 18CR - 10.5NI - 0.70CB (NB) (347), SOLUTION HEAT TREATED
SAE AMS 5570 : 2013	STEEL, CORROSION AND HEAT-RESISTANT, SEAMLESS TUBING 18CR - 11NI - 0.40TI (321), SOLUTION HEAT TREATED
QQ-S-763 Revision F:1996	STEEL BARS, WIRE, SHAPES AND FORGINGS; CORROSION RESISTANT
MIL-STD-100 Revision G:1997	ENGINEERING DRAWINGS
SAE AS 1241 : 2016	FIRE RESISTANT PHOSPHATE ESTER HYDRAULIC FLUID FOR AIRCRAFT
SAE MA 2078 : 1992	TEST METHODS, HOSE ASSEMBLIES, POLYTETRAFLUOROETHYLENE (PTFE), METRIC
SAE AMS 5639 : 2017	STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, MECHANICAL TUBING, AND RINGS, 19CR - 10NI, SOLUTION HEAT TREATED
SAE MA 4629 : 2015	HOSE ASSEMBLY, PTFE, PARA ARAMID REINFORCED, HEAVY-DUTY 21000 kPa, 135 DEG C, FLARELESS, TITANIUM FITTINGS, JUMP SIZES, 90 TO 90 DEGREES, METRIC
MIL H 5606 : G	HYDRAULIC FLUID, PETROLEUM BASE; AIRCRAFT; MISSILE AND ORDNANCE
SAE AS 4488 : 2013	TUBULAR ASSEMBLIES, FUSION WELDED, INSPECTION PROCESSES AND ACCEPTANCE STANDARDS FOR
SAE AMS 5636 : 2006	STEEL, CORROSION-RESISTANT, BARS AND WIRE, 18CR - 9.0NI (SAE 30302), SOLUTION HEAT TREATED AND COLD DRAWN, 100 KSI (689 MPA) TENSILE STRENGTH
MIL-STD-105 Revision E:1989	SAMPLING PROCEDURES AND TABLES FOR INSPECTION BY ATTRIBUTES
SAE AMS 5576 : 2005	STEEL, CORROSION AND HEAT RESISTANT, WELDED TUBING - 18CR - 10.5NI - 0.40TI (SAE 30321) SOLUTION HEAT TREATED
SAE AMS 5556 : 2016	STEEL, CORROSION AND HEAT-RESISTANT, SEAMLESS OR WELDED HYDRAULIC TUBING 18CR - 11NI - 0.70CB (347) SOLUTION HEAT TREATED
MIL-F-85421 Revision B:1986	FITTINGS, TUBE, FLUID SYSTEMS, SEPARABLE, BEAM SEAM, 3000/4000 PSI - GENERAL SPECIFICATION FOR
SAE AMS 4928 : 2016	TITANIUM ALLOY BARS, WIRE, FORGINGS, RINGS, AND DRAWN SHAPES, 6AL - 4V, ANNEALED
MIL-PRF-46010 Revision H:2013	LUBRICANT, SOLID FILM, HEAT CURED, CORROSION INHIBITING NATO CODE S-1738
SAE AMS 5557 : 2012	STEEL, CORROSION AND HEAT RESISTANT, SEAMLESS OR WELDED HYDRAULIC TUBING, 18.5CR - 10.5NI - 0.40TI (SAE 30321), SOLUTION HEAT TREATED