HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE (PTFE), METALLIC REINFORCED, 28,000 KPA, 204 DEGREES C, HYDRAULIC, METRIC

Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

07-27-2015

Publisher

SAE International

1 SCOPE
2 REFERENCES
3 TECHNICAL REQUIREMENTS
4 QUALITY ASSURANCE PROVISIONS
5 PREPARATION FOR DELIVERY
6 NOTES

This SAE Aerospace Standard (AS) establishes the requirements for polytetrafluoroethylene (PTFE) hose assemblies for use in aerospace hydraulic systems at temperatures between -55 °C and 204 °C and at a nominal pressure up to 28,000 kPa (280 bar).

Committee	G-3
DocumentType	Standard
Pages	23
PublisherName	SAE International
Status	Current
Supersedes	SAE MA 614 : 1986

SAE AMS 5689 : 2012	STEEL, CORROSION AND HEAT RESISTANT, WIRE 18CR - 10.5NI - 0.40TI (321) SOLUTION HEAT TREATED
SAE AMS 2486 : 2010	CONVERSION COATING OF TITANIUM ALLOYS FLUORIDE-PHOSPHATE TYPE
SAE AMS5659S : 2016	Steel, Corrosion-Resistant, Bars, Wire, Forgings, Rings, and Extrusions 15Cr - 4.5Ni - 0.30Cb (Nb) - 3.5Cu<br>
SAE AMS 5645 : 2016	STEEL, CORROSION AND HEAT RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 18CR - 10NI - 0.40TI (321), SOLUTION HEAT TREATED
SAE ARP 1835 : 2013	PREPARATION FOR DELIVERY, GENERAL REQUIREMENTS FOR HOSE ASSEMBLIES
ISO 5855-2:1999	Aerospace MJ threads Part 2: Limit dimensions for bolts and nuts
SAE AS 611F : 2010	HOSE ASSEMBLY AND TUBING, POLYTETRAFLUOROETHYLENE, CLEANING METHODS FOR
ASTM A 262 : 2015 : REDLINE	Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels
ISO 5855-1:1999	Aerospace MJ threads Part 1: General requirements
QQ-P-35 Revision C:1988	PASSIVATION TREATMENTS FOR CORROSION-RESISTANT STEEL
SAE AMS 5581 : 2010	NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, SEAMLESS OR WELDED TUBING, 62NI - 21.5CR - 9.0MO - 3.7CB (NB), ANNEALED
SAE MA 2014 : 2015	FITTING END, ACORN FLARELESS, DESIGN STANDARD, METRIC
SAE AMS 5571J:2012(R2018)	STEEL, CORROSION AND HEAT-RESISTANT, SEAMLESS TUBING, 18CR - 10.5NI - 0.70CB (NB) (347), SOLUTION HEAT TREATED
SAE AMS 5643 : 2016	STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, MECHANICAL TUBING, AND RINGS, 16CR - 4.0NI - 0.30CB (NB) - 4.0CU, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE
ISO 6771:2007	Aerospace Fluid systems and components Pressure and temperature classifications
SAE AMS 5743 : 2014	STEEL, CORROSION AND HEAT-RESISTANT, BARS AND FORGINGS 15.5CR - 4.5NI - 2.9MO - 0.10N SOLUTION HEAT TREATED, SUB-ZERO COOLED, EQUALIZED, AND OVER-TEMPERED
SAE AMS 5697 : 2012	STEEL, CORROSION-RESISTANT, WIRE, 19CR - 9.5NI (304), SOLUTION HEAT TREATED
SAE AMS 5690 : 2015	STEEL, CORROSION AND HEAT RESISTANT, WIRE, 17CR - 12NI - 2.5MO (316), SOLUTION HEAT TREATED
SAE AMS 5573 : 2012	STEEL, CORROSION AND HEAT-RESISTANT, SEAMLESS TUBING, 17CR - 12NI - 2.5MO (SAE 30316), SOLUTION HEAT TREATED
SAE AMS 5561 : 2012	STEEL, CORROSION AND HEAT-RESISTANT, WELDED AND DRAWN OR SEAMLESS AND DRAWN TUBING, 9.0MN - 20CR - 6.5NI - 0.28N, HIGH-PRESSURE HYDRAULIC
SAE AS 1055 : 2013	FIRE TESTING OF FLEXIBLE HOSE, TUBE ASSEMBLIES, COILS, FITTINGS AND SIMILAR SYSTEM COMPONENTS
ASME B46.1 : 2009	SURFACE TEXTURE (SURFACE ROUGHNESS, WAVINESS, AND LAY)
SAE AMS 5647 : 2017	STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, MECHANICAL TUBING, AND RINGS, 19CR - 9.5NI, SOLUTION HEAT TREATED
SAE AMS 5648 : 2016	STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 17CR - 12NI - 2.5MO (316), SOLUTION HEAT TREATED
ISO 8829:1990	Aerospace Polytetrafluoroethylene (PTFE) hose assemblies Test methods
SAE ARP 908 : 2013	TORQUE REQUIREMENTS, INSTALLATION AND QUALIFICATION TEST, HOSE AND TUBE FITTING
SAE AMS 4965 : 2014	TITANIUM ALLOY, BARS, WIRE, FORGINGS, AND RINGS, 6.0AL 4.0V, SOLUTION HEAT TREATED AND AGED
SAE MA 2095 : 2015	FITTING END, 24 DEGREES CONE, DESIGN STANDARD, METRIC
MIL-STD-831 Base Document:1963	TEST REPORTS, PREPARATION OF
SAE AMS 5567 : 2015	STEEL, CORROSION RESISTANT, SEAMLESS OR WELDED HYDRAULIC TUBING, 19CR - 10NI (304), SOLUTION HEAT TREATED
SAE AMS 5637 : 2012	STEEL, CORROSION RESISTANT, BARS AND WIRE 18CR - 9.0NI (SAE 30302) SOLUTION HEAT TREATED, COLD DRAWN AND STRESS RELIEVED 125 KSI (862 MPA) TENSILE STRENGTH
SAE AMS 5646 : 2014	STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 18CR - 11NI - 0.60CB(NB) (347), SOLUTION HEAT TREATED
ISO 5855-3:1999	Aerospace MJ threads Part 3: Limit dimensions for fittings for fluid systems
SAE AMS 5688 : 2012	STEEL, CORROSION-RESISTANT, WIRE, 18CR - 9.0NI (SAE 30302), SPRING TEMPER
SAE MA 1370 : 2012	SCREW THREADS - MJ PROFILE, METRIC
SAE AMS 4945 : 2014	TITANIUM ALLOY TUBING, SEAMLESS, HYDRAULIC 3AL - 2.5V, CONTROLLED CONTRACTILE STRAIN RATIO COLD WORKED, STRESS RELIEVED
SAE AMS 5575 : 2013	STEEL, CORROSION AND HEAT-RESISTANT, WELDED TUBING, 18CR - 10.5NI - 0.70CB (NB) (347), SOLUTION HEAT TREATED
SAE AMS 5570 : 2013	STEEL, CORROSION AND HEAT-RESISTANT, SEAMLESS TUBING 18CR - 11NI - 0.40TI (321), SOLUTION HEAT TREATED
QQ-S-763 Revision F:1996	STEEL BARS, WIRE, SHAPES AND FORGINGS; CORROSION RESISTANT
MIL-STD-100 Revision G:1997	ENGINEERING DRAWINGS
SAE MA 2078 : 1992	TEST METHODS, HOSE ASSEMBLIES, POLYTETRAFLUOROETHYLENE (PTFE), METRIC
SAE AMS 5639 : 2017	STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, MECHANICAL TUBING, AND RINGS, 19CR - 10NI, SOLUTION HEAT TREATED
SAE MA 2001 : 1993	AEROSPACE FLUID SYSTEMS AND COMPONENTS - PRESSURE AND TEMPERATURE CLASSIFICATIONS
SAE AS 150 : 2014	HOSE ASSEMBLY, TYPE CLASSIFICATIONS OF, BASIC PERFORMANCE AND FIRE RESISTANCE
SAE AMS5644E:1964(S2017)	STEEL, BARS AND FORGINGS, CORROSION RESISTANT, 17CR - 7NI - 1AL
SAE AMS 5636 : 2006	STEEL, CORROSION-RESISTANT, BARS AND WIRE, 18CR - 9.0NI (SAE 30302), SOLUTION HEAT TREATED AND COLD DRAWN, 100 KSI (689 MPA) TENSILE STRENGTH
SAE AS 478 : 2015	IDENTIFICATION MARKING METHODS
SAE AMS 5653 : 2012	STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 17CR - 12NI - 2.5MO (0.030 MAX C) (316L), SOLUTION HEAT TREATED
SAE AMS 5666H : 2016	NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, EXTRUSIONS, AND RINGS, 62NI - 21.5CR - 9.0MO - 3.65CB (NB), ANNEALED
SAE AMS 5576 : 2005	STEEL, CORROSION AND HEAT RESISTANT, WELDED TUBING - 18CR - 10.5NI - 0.40TI (SAE 30321) SOLUTION HEAT TREATED
SAE AMS 5556 : 2016	STEEL, CORROSION AND HEAT-RESISTANT, SEAMLESS OR WELDED HYDRAULIC TUBING 18CR - 11NI - 0.70CB (347) SOLUTION HEAT TREATED
MIL-F-85421 Revision B:1986	FITTINGS, TUBE, FLUID SYSTEMS, SEPARABLE, BEAM SEAM, 3000/4000 PSI - GENERAL SPECIFICATION FOR
SAE AMS 4928 : 2016	TITANIUM ALLOY BARS, WIRE, FORGINGS, RINGS, AND DRAWN SHAPES, 6AL - 4V, ANNEALED
SAE AMS 5557 : 2012	STEEL, CORROSION AND HEAT RESISTANT, SEAMLESS OR WELDED HYDRAULIC TUBING, 18.5CR - 10.5NI - 0.40TI (SAE 30321), SOLUTION HEAT TREATED