SAE MS 1001 : 2017
Current
The latest, up-to-date edition.
LUBRICANTS, INDUSTRIAL OILS, AND RELATED PRODUCTS TYPE A LUBRICANT FOR GENERAL PURPOSE AND TOTAL LOSS SYSTEMS - SPECIFICATION
Hardcopy , PDF
English
08-18-2017
FOREWORD
1. SCOPE
2. REFERENCES
3. CONCEPT
4. REQUIREMENTS AND TESTING
5. NOTES
DocumentType |
Standard
|
Pages |
14
|
ProductNote |
This standard is now stabilized
|
PublisherName |
SAE International
|
Status |
Current
|
Supersedes |
ISO 3016:1994 | Petroleum products Determination of pour point |
SAE MS 1003 : 2012 | LUBRICANTS, INDUSTRIAL OILS, AND RELATED PRODUCTS TYPE D COMPRESSOR OILS - SPECIFICATION |
SAE MS 1008 : 2007 | LUBRICANTS, INDUSTRIAL OILS AND RELATED PRODUCTS TYPE M (METAL REMOVAL FLUIDS) - SPECIFICATION |
IP 71 : 1995 | SECTION 1: PETROLEUM PRODUCTS - TRANSPARENT AND OPAQUE LIQUIDS - DETERMINATION OF KINEMATIC VISCOSITY AND CALCULATION OF DYNAMIC VISCOSITY - SECTION 2: GLASS CAPILLARY KINEMATIC VISCOMETERS - SPECIFICATIONS AND OPERATING INSTRUCTIONS (TWO PART SET) |
ASTM D 892 : 2013-07 | TEST METHOD FOR FOAMING CHARACTERISTICS OF LUBRICATING OILS |
SAE MS 1010 : 2012 | LUBRICANTS, INDUSTRIAL OILS, AND RELATED PRODUCTS TYPE T TURBINE OILS - SPECIFICATION |
SAE MS 1002 : 2010 | LUBRICANTS, INDUSTRIAL OILS, AND RELATED PRODUCTS TYPE C (GEARS) SPECIFICATION |
BS 4385:1980 | Method for determination of water in petroleum products and bituminous materials (distillation method) |
DIN 51566:1983-12 (Draft) | TESTING OF LUBRICANTS; DETERMINATION OF FOAMING CHARACTERISTICS |
ASTM D 2422 : 1997 | Standard Classification of Industrial Fluid Lubricants by Viscosity System |
ISO 3675:1998 | Crude petroleum and liquid petroleum products Laboratory determination of density Hydrometer method |
ASTM D 2070 : 2017-02 | TEST METHOD FOR THERMAL STABILITY OF HYDRAULIC OILS |
ASTM D 665 : 2014-11 | TEST METHOD FOR RUST-PREVENTING CHARACTERISTICS OF INHIBITED MINERAL OIL IN THE PRESENCE OF WATER |
ISO 4263:1986 | Petroleum products Inhibited mineral oils Determination of oxidation characteristics |
DIN 51569:1978-12 | TESTING OF MINERAL OILS, LIQUID FUELS AND RELATED LIQUIDS; MEASUREMENT OF VISCOSITY USING THE VOGEL-OSSAG VISCOMETER; TEMPERATURE RANGE: -55 TO APPROXIMATELY + 10-DEG C |
ISO 7120:1987 | Petroleum products and lubricants — Petroleum oils and other fluids — Determination of rust-preventing characteristics in the presence of water |
ISO 6614:1994 | Petroleum products — Determination of water separability of petroleum oils and synthetic fluids |
IP 334 : 2015 | DETERMINATION OF LOAD CARRYING CAPACITY OF LUBRICANTS - FZG GEAR MACHINE METHOD |
ISO 6247:1998 | Petroleum products — Determination of foaming characteristics of lubricating oils |
SAE MS 1000 : 2013 | LUBRICANTS, INDUSTRIAL OILS, AND RELATED PRODUCTS - CLASSIFICATION |
IP 166 : 77(R1992) | DETERMINATION OF LOAD-CARRYING CAPACITY OF LUBRICANTS - IAE GEAR MACHINE METHOD |
ISO 2160:1998 | Petroleum products Corrosiveness to copper Copper strip test |
MS 1011 : 2013(s2018) | LUBRICANTS, INDUSTRIAL OILS AND RELATED PRODUCTS - TYPE X (GREASES) - SPECIFICATION |
SAE MS 1005 : 2010 | LUBRICANTS, INDUSTRIAL OILS, AND RELATED PRODUCTS TYPE HF FIRE-RESISTANT HYDRAULIC FLUIDS - SPECIFICATION |
SAE MS 1004 : 2010 | LUBRICANTS, INDUSTRIAL OILS, AND RELATED PRODUCTS TYPE H (HYDRAULIC FLUIDS) - SPECIFICATION |
ISO 6072:2011 | Rubber Compatibility between hydraulic fluids and standard elastomeric materials |
DIN 51561:1978-12 | TESTING OF MINERAL OILS, LIQUID FUELS AND RELATED LIQUIDS; MEASUREMENT OF VISCOSITY USING THE VOGEL-OSSAG VISCOMETER; TEMPERATURE RANGE: APPROXIMATELY 10 TO 150-DEG C |
ISO 7619:1997 | Rubber Determination of indentation hardness by means of pocket hardness meters |
ISO 3733:1999 | Petroleum products and bituminous materials — Determination of water — Distillation method |
ASTM D 5182 : 1997 : EDT 1 | Standard Test Method for Evaluating the Scuffing Load Capacity of Oils (FZG Visual Method) |
DIN 51759-1:1988-01 | TESTING OF LIQUID MINERAL OIL PRODUCTS; METHOD OF TEST FOR COPPER CORROSION; COPPER STRIP TEST |
IP 278 : 1972(R1988) | DETERMINATION OF SEAL COMPATIBILITY INDEX OF PETROLEUM OILS |
DIN 51354-2:1990-04 | TESTING OF LUBRICANTS; FZG GEAR TEST RIG; METHOD A/8.3/90 FOR LUBRICATING OILS |
DIN 53505:2000-08 | TESTING OF RUBBER - SHORE A AND SHORE D HARDNESS TEST |
ASTM D 3705 : 2014 : REDLINE | Standard Test Method for Misting Properties of Lubricating Fluids |
IP 15 : 2015 | PETROLEUM PRODUCTS - DETERMINATION OF POUR POINT |
SAE MS 1007 : 2001 | LUBRICANTS, INDUSTRIAL OILS, AND RELATED PRODUCTS TYPE G SLIDEWAY LUBRICANTS - SPECIFICATION |
ASTM D 2711 : 2017 : REDLINE | Standard Test Method for Demulsibility Characteristics of Lubricating Oils |
IP 157 : 2015 | DETERMINATION OF THE OXIDATION STABILITY OF INHIBITED MINERAL OILS (THE TOST TEST) |
ISO 6743-0:1981 | Lubricants, industrial oils and related products (class L) — Classification — Part 0: General |
SAE MS 1009 : 2012 | LUBRICANTS, INDUSTRIAL OILS, AND RELATED PRODUCTS TYPE P PNEUMATIC TOOL OILS - SPECIFICATION |
ASTM D 471 : 2016-02 | TEST METHOD FOR RUBBER PROPERTY - EFFECT OF LIQUIDS |
ISO 3448:1992 | Industrial liquid lubricants — ISO viscosity classification |
SAE MS 1006 : 2011 | LUBRICANTS, INDUSTRIAL OILS, AND RELATED PRODUCTS TYPE F LUBRICANT FOR SPINDLE BEARINGS, AND ASSOCIATED CLUTCHES - SPECIFICATION |
IP 135 : 2015 | DETERMINATION OF RUST-PREVENTING CHARACTERISTICS OF STEAM-TURBINE OIL IN THE PRESENCE OF WATER |
ASTM D 943 : 2017-08 | TEST METHOD FOR OXIDATION CHARACTERISTICS OF INHIBITED MINERAL OILS |
ASTM D 1744 : 2013 | Standard Test Method for Determination of Water in Liquid Petroleum Products by Karl Fischer Reagent (Withdrawn 2016) |
ISO 868:2003 | Plastics and ebonite — Determination of indentation hardness by means of a durometer (Shore hardness) |
ISO 1817:2015 | Rubber, vulcanized or thermoplastic Determination of the effect of liquids |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.