S.R. CWA 16106:2010
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
Hardcopy , PDF
05-13-2021
English
01-01-2010
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Risk management
5 Threat Scenarios
6 Stakeholders in an Incident
7 Selection of PPE in CBRN incidents:
8 Performance requirements - Protection
9 Requirements
10 Training
11 Recovery
Annex A (Informative)
Annex B (Informative)
Annex C (Informative)
Bibliography
Provides guidance on selection, as well as safety and effectiveness of PPE for CBRN scenarios.
DocumentType |
Standard
|
Pages |
36
|
PublisherName |
National Standards Authority of Ireland
|
Status |
Withdrawn
|
EN 943-1:2015 | Protective clothing against dangerous solid, liquid and gaseous chemicals, including liquid and solid aerosols - Part 1: Performance requirements for Type 1 (gas-tight) chemical protective suits |
EN 1827:1999+A1:2009 | Respiratory protective devices - Half masks without inhalation valves and with separable filters to protect against gases or gases and particles or particles only - Requirements, testing, marking |
EN 407:2004 | Protective gloves against thermal risks (heat and/or fire) |
EN 14387:2004+A1:2008 | Respiratory protective devices - Gas filter(s) and combined filter(s) - Requirements, testing, marking |
EN 145:1997/A1:2000 | RESPIRATORY PROTECTIVE DEVICES - SELF-CONTAINED CLOSED-CIRCUIT BREATHING APPARATUS COMPRESSED OXYGEN OR COMPRESSED OXYGEN-NITROGEN TYPE - REQUIREMENTS, TESTING, MARKING |
EN 943-2:2002 | Protective clothing against liquid and gaseous chemicals, including liquid aerosols and solid particles - Part 2: Performance requirements for "gas-tight" (Type 1) chemical protective suits for emergency teams (ET) |
EN 374-1:2003 | Protective gloves against chemicals and micro-organisms - Part 1: Terminology and performance requirements |
EN ISO 13982-2:2004 | Protective clothing for use against solid particulates - Part 2: Test method of determination of inward leakage of aerosols of fine particles into suits (ISO 13982-2:2004) |
EN 14360:2004 | Protective clothing against rain - Test method for ready made garments - Impact from above with high energy droplets |
EN 13034:2005+A1:2009 | Protective clothing against liquid chemicals - Performance requirements for chemical protective clothing offering limited protective performance against liquid chemicals (Type 6 and Type PB [6] equipment) |
EN 149:2001+A1:2009 | Respiratory protective devices - Filtering half masks to protect against particles - Requirements, testing, marking |
ISO 11612:2015 | Protective clothing — Clothing to protect against heat and flame — Minimum performance requirements |
EN ISO 14116:2015 | Protective clothing - Protection against flame - Limited flame spread materials, material assemblies and clothing (ISO 14116:2015) |
EN 388 : 1994 | PROTECTIVE GLOVES AGAINST MECHANICAL RISKS |
EN 1073-1:2016/AC:2016 | PROTECTIVE CLOTHING AGAINST SOLID AIRBORNE PARTICLES INCLUDING RADIOACTIVE CONTAMINATION - PART 1: REQUIREMENTS AND TEST METHODS FOR COMPRESSED AIR LINE VENTILATED PROTECTIVE CLOTHING, PROTECTING THE BODY AND THE RESPIRATORY TRACT |
EN 529:2005 | Respiratory protective devices - Recommendations for selection, use, care and maintenance - Guidance document |
EN 136:1998/AC:2003 | RESPIRATORY PROTECTIVE DEVICES - FULL-FACE MASKS - REQUIREMENTS, TESTING, MARKING |
DIN 58647-7:1997-12 | RESPIRATORY PROTECTIVE DEVICES FOR SELF RESCUE - : FILTERING DEVICES FOR SELF-RESCUE; REQUIREMENTS, TESTING, MARKING |
BS 8468-1:2006 | Respiratory equipment for use against chemical, biological, radiological and nuclear (CBRN) agents Positive pressure, self-contained, open-circuit breathing apparatus. Specification |
EN 12477:2001/A1:2005 | PROTECTIVE GLOVES FOR WELDERS |
EN 812:2012 | Industrial bump caps |
EN ISO 13982-1:2004/A1:2010 | Protective clothing for use against solid particulates - Part 1: Performance requirements for chemical protective clothing providing protection to the full body against airborne solid particulates (type 5 clothing) - Amendment 1 (ISO 13982-1:2004/Amd 1:2010) |
AAP-21 : 2004 | NATO GLOSSARY OF CHEMICAL, BIOLOGICAL, RADIOLOGICAL AND NUCLEAR TERMS AND DEFINITIONS |
ISEA 110 : 2009 CORR 2010 | AIR-PURIFYING RESPIRATORY PROTECTIVE SMOKE ESCAPE DEVICES (RPEDS) |
EN 420:2003+A1:2009 | Protective gloves - General requirements and test methods |
EN 405:2001+A1:2009 | Respiratory protective devices - Valved filtering half masks to protect against gases or gases and particles - Requirements, testing, marking |
EN 659:2003+A1:2008/AC:2009 | PROTECTIVE GLOVES FOR FIREFIGHTERS |
BS 8468-3.2:2009 | Respiratory protective devices for use against chemical, biological, radiological and nuclear (CBRN) agents Air-purifying devices incorporating a hood for escape. Specification |
EN 374-2:2014 | Protective gloves against dangerous chemicals and micro-organisms - Part 2: Determination of resistance to penetration |
BS 8468-4:2008 | Respiratory protective devices for use against chemical, biological, radiological and nuclear (CBRN) agents Powered air-purifying respirators. Specification |
EN 140:1998/AC:1999 | Respiratory protective devices - Half masks and quarter masks - Requirements, testing, marking |
EN 471:2003+A1:2007 | High-visibility warning clothing for professional use - Test methods and requirements |
EN 374-3:2003/AC:2006 | PROTECTIVE GLOVES AGAINST CHEMICALS AND MICRO-ORGANISMS - PART 3: DETERMINATION OF RESISTANCE TO PERMEATION BY CHEMICALS |
EN 12941:1998/A2:2008 | RESPIRATORY PROTECTIVE DEVICES - POWERED FILTERING DEVICES INCORPORATING A HELMET OR A HOOD - REQUIREMENTS, TESTING, MARKING |
EN 469:2005/A1:2006 | PROTECTIVE CLOTHING FOR FIREFIGHTERS - PERFORMANCE REQUIREMENTS FOR PROTECTIVE CLOTHING FOR FIREFIGHTING |
EN 443:2008 | Helmets for fire fighting in buildings and other structures |
EN 340:2003 | Protective clothing - General requirements |
EN 143:2000/A1:2006 | RESPIRATORY PROTECTIVE DEVICES - PARTICLE FILTERS - REQUIREMENTS, TESTING, MARKING |
BS 8467:2006 | Protective clothing. Personal protective ensembles for use against chemical, biological, radiological and nuclear (CBRN) agents. Categorization, performance requirements and test methods |
EN 373 : 1993 | PROTECTIVE CLOTHING - ASSESSMENT OF RESISTANCE OF MATERIALS TO MOLTEN METAL SPLASH |
EN 14605:2005+A1:2009 | Protective clothing against liquid chemicals - performance requirements for clothing with liquid-tight (Type 3) or spray-tight (Type 4) connections, including items providing protection to parts of the body only (Types PB [3] and PB [4]) |
EN 367:1992/AC:1992 | PROTECTIVE CLOTHING - PROTECTION AGAINST HEAT AND FIRE - METHOD OF DETERMINING HEAT TRANSMISSION ON EXPOSURE TO FLAME |
EN 343:2003+A1:2007/AC:2009 | PROTECTIVE CLOTHING - PROTECTION AGAINST RAIN |
EN 12942:1998/A2:2008 | RESPIRATORY PROTECTIVE DEVICES - POWER ASSISTED FILTERING DEVICES INCORPORATING FULL FACE MASKS, HALF MASKS OR QUARTER MASKS - REQUIREMENTS, TESTING, MARKING |
NFPA 1991 : 2016 | Standard on Vapor-Protective Ensembles for Hazardous Materials Emergencies |
EN 421:2010 | Protective gloves against ionizing radiation and radioactive contamination |
BS 8468-2:2006 | Respiratory protective devices for use against chemical, biological, radiological and nuclear (CBRN) agents Negative pressure, air purifying devices with full face mask. Specification |
EN 397:2012+A1:2012 | Industrial safety helmets |
EN 14126:2003/AC:2004 | PROTECTIVE CLOTHING - PERFORMANCE REQUIREMENTS AND TESTS METHODS FOR PROTECTIVE CLOTHING AGAINST INFECTIVE AGENTS |
EN 1073-2:2002 | Protective clothing against radioactive contamination - Part 2: Requirements and test methods for non-ventilated protective clothing against particulate radioactive contamination |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.