• There are no items in your cart

TIA 232 : F1997(R2012)

Current
Current

The latest, up-to-date edition.

INTERFACE BETWEEN DATA TERMINAL EQUIPMENT AND DATA CIRCUIT-TERMINATING EQUIPMENT EMPLOYING SERIAL BINARY DATA INTERCHANGE
Published date

01-12-2013

Section one
1.0 Scope
1.1 Abstracts, sections two through seven
1.2 Interface configurations
1.3 Data signaling rates
1.4 Signal common
1.5 Synchronous/nonsynchronous communication
1.6 Classes of service
1.7 Allocation of functions
1.8 Modes of operation
Section two
2.0 Signal characteristics
2.1 Electrical characteristics
2.1.1 Equivalent circuit
2.1.2 Safety considerations
2.1.3 Definition of signal states on interchange
        circuits
2.1.4 Receiver impedance
2.1.5 "Fail safe" interchange circuits
2.1.6 Generator potentials and currents
2.1.7 Requirements in transition region
2.2 Protective ground (frame ground)
2.3 Shield
Section three
3.0 Interface mechanical characteristics
3.1 Definition of mechanical interface
3.2 Cable length
3.3 25-position interface connector
3.4 Alt A 26-position interface connector
3.5 Connector pin identification
Section four
4.0 Functional description of interchange circuits
4.1 General
4.2 Categories
4.3 Signal characteristics, general
4.4 Interchange circuits
4.4.1 Circuit AB Signal common
4.4.2 Circuit BA Transmitted data
4.4.3 Circuit BB Received data
4.4.4 Circuit CA Request to send
4.4.5 Circuit CB Clear to send
4.4.6 Circuit CC DCE ready
4.4.7 Circuit CD DTE ready
4.4.8 Circuit CE Ring indicator
4.4.9 Circuit CF Received line signal detector
4.4.10 Circuit CG Signal quality detector
4.4.11 Circuit CH Data signal rate selector (DTE
                     source)
4.4.12 Circuit CI Data signal rate selector (DCE
                     source)
4.4.13 Circuit CJ Ready for receiving
4.4.14 Circuit LL Local loopback
4.4.15 Circuit RL Remote loopback
4.4.16 Circuit TM Test mode
4.4.17 Circuit DA Transmitter signal element timing
                     (DTE source)
4.4.18 Circuit DB Transmitter signal element timing
                     (DCE source)
4.4.19 Circuit DD Receiver signal element timing
4.4.20 Circuit SBA Secondary transmitted data
4.4.21 Circuit SBB Secondary received data
4.4.22 Circuit SCA Secondary request to send
4.4.23 Circuit SCB Secondary clear to send
4.4.24 Circuit SCF Secondary received line signal
                     detector
Section five
5.0 Standard interfaces for selected communication
        system configurations
5.1 Abstract
5.2 Conditions
5.3 Configurations
5.4 Use of signal common
Section six
6.0 Recommendations and explanatory notes
6.1 Classes of service
6.2 Noise considerations
6.3 Use of relays
6.4 Circuit capacitance
6.5 Test receivers
6.6 Distortion
6.7 Line signals
6.8 Use of circuit LL for "busy out"
Section seven
7.0 Glossary
Appendix A
A.1 Interconnecting cable characteristics
A.2 Example
Appendix B - References

Defines the interconnection of data terminal equipment (DTE) and data circuit-terminating equipment (DCE) employing binary data interchange.

Committee
TR-30.2
DevelopmentNote
Supersedes EIA TSB 26 (07/2004)
DocumentType
Standard
PublisherName
Telecommunications Industry Association
Status
Current

I.S. EN 50201:2002 INTERFACES FOR DVB-IRD
ES 202 218 : 1.1.1 FINAL DRAFT DIGITAL VIDEO BROADCASTING (DVB); INTERACTIVE CHANNEL THROUGH THE GENERAL PACKET RADIO SYSTEM (GPRS)
DIN EN 15430-1 E : 2015 WINTER AND ROAD SERVICE AREA MAINTENANCE EQUIPMENT - DATA ACQUISITION AND TRANSMISSION - PART 1: INVEHICLE DATA ACQUISITION
ANSI INCITS 178 : 1990 : R2000 PACKET-SWITCHED SIGNALING SYSTEM BETWEEN PUBLIC NETWORKS PROVIDING DATA TRANSMISSION SERVICES
03/114802 DC : DRAFT SEP 2003 BS EN ISO/IEEE 11073-30200 - HEALTH INFORMATICS - POINT-OF-CARE MEDICAL DEVICE COMMUNICATIONS - PART 30200 - TRANSPORT PROFILE - IRDA BASED - CABLE CONNECTED
BS IEC 62529:2012 IEEE standard for signal and test definition
09/30198404 DC : DRAFT JAN 2009 BS EN 61784-1 - INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 1: FIELD BUS PROFILES
MIL-PRF-71185 Revision A:2013 Dynamic Reference Unit-Hybrid-Replacement (DRU-H-R)
EN 61326-1:2013 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 1: General requirements
FIPS PUB 146-1 : NOTICE 1 GOVERNMENT OPEN SYSTEMS INTERCONNECTION PROFILE (GOSIP)
CSA ISO/IEC 16500-1 : 2002 : R2015 INFORMATION TECHNOLOGY - GENERIC DIGITAL AUDIO-VISUAL SYSTEMS - PART 1: SYSTEM REFERENCE MODELS AND SCENARIOS
CSA ISO/IEC 16500-5 : 2002 : R2015 INFORMATION TECHNOLOGY - GENERIC DIGITAL AUDIO-VISUAL SYSTEMS - PART 5: HIGH AND MID-LAYER PROTOCOLS
CSA ISO/IEC 16500-1 : 2002 : R2010 INFORMATION TECHNOLOGY - GENERIC DIGITAL AUDIO-VISUAL SYSTEMS - PART 1: SYSTEM REFERENCE MODELS AND SCENARIOS
ANSI INCITS 178 : 1990 : R2005 PACKET-SWITCHED SIGNALING SYSTEM BETWEEN PUBLIC NETWORKS PROVIDING DATA TRANSMISSION SERVICES
IEEE/ANSI N42.38-2015 American National Standard for Performance Criteria for Spectroscopy-Based Portal Monitors Used in Homeland Security
ISO 15745-3:2003 Industrial automation systems and integration Open systems application integration framework Part 3: Reference description for IEC 61158-based control systems
GR 828 CORE : ISSUE 1 REV 2 OPERATIONS TECHNOLOGY GENERIC REQUIREMENTS (OTGR): GENERIC OPERATIONS INTERFACE - OSI COMMUNICATIONS ARCHITECTURE
ASTM E 2077 : 2000 : R2010 Standard Specification for Analytical Data Interchange Protocol for Mass Spectrometric Data
EN 50201:2001 Interfaces for DVB-IRD
MIL-DTL-29563 Revision B:2014 ANTENNA SYSTEM, AIMS SHIPBOARD, ELECTRONICALLY STEERED OE-120/UPX
A-A-59459 Base Document:1999 GRINDING MACHINE, TOOL AND CUTTER, COMPUTER NUMERICAL CONTROL (CNC)
A-A-59415 Base Document:1999 Grinding Machine, Universal, Vertical-Spindle, Nontraversing Rotary Table, Computer Numerical Control (CNC)
ASHRAE GUIDELINE 13 : 2014 SPECIFYING BUILDING AUTOMATION SYSTEMS
GS LTN 002 : 1.1.1 LOW THROUGHPUT NETWORKS (LTN); FUNCTIONAL ARCHITECTURE
I.S. EN 61326-1:2013 ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - EMC REQUIREMENTS - PART 1: GENERAL REQUIREMENTS (IEC 61326-1:2012 (EQV))
BS IEC 61671-2:2016 Standard for automatic test markup language (ATML) instrument description
OIML R 100 : 1991 ATOMIC ABSORPTION SPECTROMETERS FOR MEASURING METAL POLLUTANTS IN WATER
ARINC 828-4:2015 ELECTRONIC FLIGHT BAG (EFB) STANDARD INTERFACE
A-A-59332 Revision A:2013 GRINDING MACHINE, CYLINDRICAL, EXTERNAL, CENTER-TYPE, COMPUTER NUMERICAL CONTROL (CNC)
BS 6513-5:1987 Wideband cabled distribution systems Recommendations for one-way and interactive data services
BS EN 61209:1999 Maritime navigation and radiocommunication equipment and systems. Integrated bridge systems (IBS). Operational and performance requirements, methods of testing and required test results
IEC 61671:2012 Automatic Test Markup Language (ATML) for Exchanging Automatic Test Equipment and Test Information via XML
MIL-PRF-32006 Base Document:2004 PROGRAMMABLE CONTROLLER, NAVAL SHIPBOARD
CSA ISO/IEC 16500-5 : 2002 INFORMATION TECHNOLOGY - GENERIC DIGITAL AUDIO-VISUAL SYSTEMS - PART 5: HIGH AND MID-LAYER PROTOCOLS
IEC PAS 62030:2004 Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Section 1: MODBUS® Application Protocol Specification V1.1a - Section 2: Real-Time Publish-Subscribe (RTPS) Wire Protocol Specification Version 1.0
TS 102 358 : 1.1.1 DIGITAL RADIO MONDIALE (DRM); SPECIFIC RESTRICTIONS FOR THE USE OF THE DISTRIBUTION AND COMMUNICATION PROTOCOL (DCP)
ANSI INCITS 100 : 1989 : R2000 INTERFACE BETWEEN DATA TERMINAL EQUIPMENT (DTE) AND DATA CIRCUIT-TERMINATING EQUIPMENT (DCE) FOR OPERATION WITH PACKET-SWITCHED DATA NETWORKS (PSDN), OR BETWEEN TWO DTES, BY DEDICATED CIRCUIT
CEI EN 50201 : 2002 INTERFACES FOR DVB-IRD
SCTE 104 : 2017 AUTOMATION SYSTEM TO COMPRESSION SYSTEM COMMUNICATIONS APPLICATIONS PROGRAM INTERFACE (API)
ISO/IEC 16500-1:1999 Information technology Generic digital audio-visual systems Part 1: System reference models and scenarios
ASTM E 2077 : 2000 : R2016 Standard Specification for Analytical Data Interchange Protocol for Mass Spectrometric Data
BS EN ISO 16484-5:2014 Building automation and control systems (BACS) Data communication protocol
ISO/IEEE 11073-30200:2004 Health informatics — Point-of-care medical device communication — Part 30200: Transport profile — Cable connected
09/30205023 DC : 0 BS EN 61158-2 - INDUSTRIAL COMMUNICATION NETWORKS - FIELDBUS SPECIFICATIONS - PART 2: PHYSICAL LAYER SPECIFICATION AND SERVICE DEFINITION
IEC 61326-1:2012 RLV Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 1: General requirements
VDI 4201 Blatt 3:2012-07 Performance criteria on automated measuring and electronic data evaluation systems for monitoring emissions - Digital interface - Specific requirements for Modbus
NEMA TS 3.3 : 1996 NATIONAL TRANSPORTATION COMMUNICATIONS FOR ITS PROTOCOL (NTCIP) CLASS B PROFILE
NEMA ICS 16:2001 Motion/Position Control Motors, Controls and Feedback Devices
NEMA MG 7 : 93 REV 1 96 MOTION/POSITION CONTROL MOTORS AND CONTROLS
IEEE 1671.3-2007 IEEE Standard for Automatic Test Markup Language (ATML) for Exchanging Automatic Test Information via XML (eXtensible Markup Language): Exchanging UUT (Unit Under Test) Description Information
NEMA TS 3.1 : 1996 NATIONAL TRANSPORTATION COMMUNICATIONS FOR ITS PROTOCOL (NTCIP) OVERVIEW
IEC 61671-2:2016 Standard for automatic test markup language (ATML) instrument description
ASTM F 1757 : 1996 : R2002 Standard Guide for Digital Communication Protocols for Computerized Systems
BS IEC 61671:2012 IEEE standard for automatic test markup language (ATML) for exchanging automatic test equipment and test information via XML
MIL-DTL-2212 Revision K:2014 CONTACTORS AND CONTROLLERS, ELECTRIC MOTOR AC OR DC, AND ASSOCIATED SWITCHING DEVICES
ANSI INCITS 100 : 1989 : R2005 INTERFACE BETWEEN DATA TERMINAL EQUIPMENT (DTE) AND DATA CIRCUIT-TERMINATING EQUIPMENT (DCE) FOR OPERATION WITH PACKET-SWITCHED DATA NETWORKS (PSDN), OR BETWEEN TWO DTES, BY DEDICATED CIRCUIT
MIL-M-80255 Revision B:1990 MACHINING CENTERS, VERTICAL, SINGLE SPINDLE, COMPUTER NUMERICAL CONTROL (CNC)
MIL-C-85518 Base Document:1984 COMPUTER SET, STANDARD AIRBORNE AN/AYK-14(V) GENERAL SPECIFICATION FOR
03/114805 DC : DRAFT SEP 2003 BS EN ISO/IEEE 11073-30300 - HEALTH INFORMATICS - POINT-OF-CARE MEDICAL DEVICE COMMUNICATIONS - PART 30300: TRANSPORT PROFILE - IRDA BASED - INFRARED WIRELESS
CSA ISO/IEC 16500-5 : 2002 : R2010 INFORMATION TECHNOLOGY - GENERIC DIGITAL AUDIO-VISUAL SYSTEMS - PART 5: HIGH AND MID-LAYER PROTOCOLS
A-A-58089 Base Document:1996 Comparator, Bench Type, Electronically Amplified
I.S. EN 15430-1:2015 WINTER AND ROAD SERVICE AREA MAINTENANCE EQUIPMENTS - DATA ACQUISITION AND TRANSMISSION - PART 1: IN VEHICLE DATA ACQUISITION
ASTM F 1757 : 1996 : R2008 Standard Guide for Digital Communication Protocols for Computerized Systems
IEC 61326-1 REDLINE : 2.0 ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - EMC REQUIREMENTS - PART 1: GENERAL REQUIREMENTS
ASHRAE 135 : 2016 BACNET - A DATA COMMUNICATION PROTOCOL FOR BUILDING AUTOMATION AND CONTROL NETWORKS
IEEE DRAFT 743 : D2 JUN 95 STANDARD EQUIPMENT REQUIREMENTS AND MEASUREMENT TECHNIQUES FOR ANALOG TRANSMISSION PARAMETERS FOR TELECOMMUNICATIONS
IES TM 23 : 2011 LIGHTING CONTROL PROTOCOLS
ANSI INCITS 105 : 1983 INFORMATION SYSTEMS - DATA LINK ENCRYPTION
TIA/EIA 592 : A1998(R2014) ASYNCHRONOUS FACSIMILE DCE CONTROL STANDARD - SERVICE CLASS 2
12/30264885 DC : 0 BS EN 61784-1 - INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 1: FIELDBUS PROFILES
BS EN 61326-1:2013 Electrical equipment for measurement, control and laboratory use. EMC requirements General requirements
DIN EN 15430-1:2015-10 Winter and road service area maintenance equipment - Data acquisition and transmission - Part 1: In-vehicle data acquisition
MIL-P-80054 Revision D:1988 PUNCHING MACHINE, METAL, TURRET TYPE, NUMERICALLY CONTROLLED
MIL-PRF-52955 Revision D:2009 IMPROVED POSITION AND AZIMUTH DETERMINING SYSTEM (IPADS)
MIL-P-80276 Base Document:1988 PRESS BRAKES, HYDRAULICALLY OPERATED, SHEET AND PLATE, COMPUTER NUMERICALLY CONTROLLED (CNC)
ASTM E 1381 : 2002 Standard Specification for Low-Level Protocol to Transfer Messages Between Clinical Laboratory Instruments and Computer Systems (Withdrawn 2002)
MIL-DTL-62421 Revision A:2009 CONTROL, UNIT, ELECTRONIC, DIGITAL
CSA ISO/IEC 16500-1:2002 INFORMATION TECHNOLOGY - GENERIC DIGITAL AUDIO-VISUAL SYSTEMS - PART 1: SYSTEM REFERENCE MODELS AND SCENARIOS
MIL-STD-1397 Revision C:1995 INPUT/OUTPUT INTERFACES, STANDARD DIGITAL DATA, NAVY SYSTEMS
MIL-P-80172 Revision C:1988 PUNCHING MACHINE, METAL SINGLE END TYPE, NUMERICALLY CONTROLLED
API 554-2 : 2008 : R2016 PROCESS CONTROL SYSTEMS - PROCESS CONTROL SYSTEM DESIGN
IEEE 1073.3.2-2000 IEEE Standard for Medical Device Communications - Transport Profile - IrDA Based - Cable Connected
IEEE 1671.2-2012 IEEE Standard for Automatic Test Markup Language (ATML) Instrument Description
ISO 18186:2011 Freight containers RFID cargo shipment tag system
SR 2751 : ISSUE 2 OCS OS-NE INTERFACE SUPPORT FOR THE OSI/CMISE PROTOCOL STACK
ASTM F 1757 : 1996 : R2015 Standard Guide for Digital Communication Protocols for Computerized Systems
I.S. EN ISO 16484-5:2017 BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS) - PART 5: DATA COMMUNICATION PROTOCOL (ISO 16484-5:2017)
IEC 62529:2012 Standard for Signal and Test Definition
IEC 61097-7:1996+AMD1:2018 CSV Global maritime distress and safety system (GMDSS) - Part 7: Shipborne VHF radiotelephone transmitter and receiver - Operational and performance requirements, methods of testing and required test results
IEEE/ANSI N42.43-2006 American National Standard Performance Criteria for Mobile and Transportable Radiation Monitors Used for Homeland Security
BS EN ISO 11073-30300:2005 Health informatics. Point-of-care medical device communication Transport profile. Infrared wireless
EN ISO 16484-5:2017 Building automation and control systems (BACS) - Part 5: Data communication protocol (ISO 16484-5:2017)
ISO/IEEE 11073-30300:2004 Health informatics — Point-of-care medical device communication — Part 30300: Transport profile — Infrared wireless
BS EN ISO 11073-30200 : 2005 HEALTH INFORMATICS - POINT-OF-CARE MEDICAL DEVICE COMMUNICATION - PART 30200: TRANSPORT PROFILE - CABLE CONNECTED
EN ISO 11073-30200:2005/A1:2015 HEALTH INFORMATICS - POINT-OF-CARE MEDICAL DEVICE COMMUNICATION - PART 30200: TRANSPORT PROFILE - CABLE CONNECTED (ISO/IEEE 11073- 30200:2004/AMD 1:2015)
EN ISO 11073-30300:2005 Health informatics - Point-of-care medical device communication - Part 30300: Transport profile - Infrared wireless (ISO/IEEE 11073-30300:2004)
EN 15430-1:2015 Winter and road service area maintenance equipment - Data acquisition and transmission - Part 1: In-vehicle data acquisition
SMPTE ST 273 : 1995 TELEVISION - STATUS MONITORING AND DIAGNOSTICS PROTOCOL
ISO/IEC 16500-5:1999 Information technology Generic digital audio-visual systems Part 5: High and mid-layer protocols
UNI TS 11291-1 : 2013 GAS MEASUREMENT SYSTEMS - HOURLY BASED GAS METERING SYSTEMS - PART 1: GENERAL REQUIREMENTS FOR REMOTE READING OR REMOTE MANAGEMENT SYSTEM
BS ISO 18186:2011 Freight containers. RFID cargo shipment tag system
00/561904 DC : DRAFT APR 2000 BS EN ISO 15751 - OPHTHALMIC OPTICS - DATA TRANSMISSION INTERCHANGEFOR OPHTHALMIC INSTRUMENTS
10/30216008 DC : 0 BS EN 61326-1 - ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - EMC REQUIREMENTS - PART 1: GENERAL REQUIREMENTS
11/30244172 DC : 0 BS EN 61326-1 IEC 61326-1 ED. 2 - ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE EMC REQUIREMENTS - PART 1: GENERAL REQUIREMENTS
ANSI Z80.26 : 1996 OPHTHALMICS - DATA PROCESSING AND INFORMATION INTERCHANGE FOR OPHTHALMIC INSTRUMENTS
01/615003 DC : DRAFT JAN 2001 ISO/DIS 15745-3 - INDUSTRIAL AUTOMATION SYSTEMS AND INTEGRATION - OPEN SYSTEMS APPLICATION INTEGRATION FRAMEWORKS - PART 3: REFERENCE DESCRIPTION FOR EN 50170 AND EN 50254 BASED CONTROL SYSTEMS
TS 102 201 : 1.2.1 DIGITAL VIDEO BROADCASTING (DVB); INTERFACES FOR DVB INTEGRATED RECEIVER DECODER (DVB-IRD)
ASTM F 1757 : 1996 Standard Guide for Digital Communication Protocols for Computerized Systems
API 554-2 : 2008 PROCESS CONTROL SYSTEMS - PROCESS CONTROL SYSTEM DESIGN
IEEE C37.236-2013 IEEE Guide for Power System Protective Relay Applications Over Digital Communication Channels
IEEE 1815-2012 REDLINE IEEE Standard for Electric Power Systems Communications-Distributed Network Protocol (DNP3)
BS EN 15430-1:2015 Winter and road service area maintenance equipment. Data acquisition and transmission In-vehicle data acquisition
TR 102 021-9 : 1.2.1 TERRESTRIAL TRUNKED RADIO (TETRA); USER REQUIREMENT SPECIFICATION TETRA RELEASE 2.1; PART 9: PERIPHERAL EQUIPMENT INTERFACE
TR 102 068 : 1.1.3 HUMAN FACTORS (HF); REQUIREMENTS FOR ASSISTIVE TECHNOLOGY DEVICES IN ICT
ASTM E 2077 : 2000 : R2005 Standard Specification for Analytical Data Interchange Protocol for Mass Spectrometric Data
ASTM E 2077 : 2000 Standard Specification for Analytical Data Interchange Protocol for Mass Spectrometric Data
ISO 16484-5:2017 Building automation and control systems (BACS) — Part 5: Data communication protocol

TIA/EIA 334 : C2000(R2014) SIGNAL QUALITY AT INTERFACE BETWEEN DATA TERMINAL EQUIPMENT AND SYNCHRONOUS DATA CIRCUIT-TERMINATING EQUIPMENT FOR SERIAL DATA TRANSMISSION
ISO/IEC 11560:1992 Information technology Information interchange on 130 mm optical disk cartridges using the magneto-optical effect, for write once, read multiple functionality
TIA/EIA 602 : A2000(R2014) DATA TRANSMISSION SYSTEMS AND EQUIPMENT - SERIAL ASYNCHRONOUS AUTOMATIC DIALING AND CONTROL

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.