UNE-EN 1090-3:2011
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Execution of steel structures and aluminium structures - Part 3: Technical requirements for aluminium structures
Hardcopy , PDF
11-13-2019
English, Spanish, Castilian
05-18-2011
Committee |
CTN 76
|
DocumentType |
Standard
|
Pages |
116
|
PublisherName |
Asociacion Espanola de Normalizacion
|
Status |
Superseded
|
SupersededBy |
Standards | Relationship |
EN 1090-3:2019 | Identical |
EN 1090-3:2008 | Identical |
EN ISO 1479:2011 | Hexagon head tapping screws (ISO 1479:2011) |
ISO 10511:2012 | Prevailing torque type hexagon thin nuts (with non-metallic insert) |
ISO 8839:1986 | Mechanical properties of fasteners Bolts, screws, studs and nuts made of non-ferrous metals |
EN ISO 15981 : 2002 | OPEN END BLIND RIVETS WITH BREAK PULL MANDREL AND PROTRUDING HEAD ALA/ALA (ISO 15981:2002) |
ISO 9018:2015 | Destructive tests on welds in metallic materials Tensile test on cruciform and lapped joints |
EN 14399-8:2007 | High-strength structural bolting assemblies for preloading - Part 8: System HV - Hexagon fit bolt and nut assemblies |
EN ISO 6520-1:2007 | Welding and allied processes - Classification of geometric imperfections in metallic materials - Part 1: Fusion welding (ISO 6520-1:2007) |
ISO 898-2:2012 | Mechanical properties of fasteners made of carbon steel and alloy steel — Part 2: Nuts with specified property classes — Coarse thread and fine pitch thread |
ISO 7090:2000 | Plain washers, chamfered Normal series Product grade A |
EN ISO 15481 : 1999 | CROSS RECESSED PAN HEAD DRILLING SCREWS WITH TAPPING SCREW THREAD (ISO 15481:1999) |
EN 485-1:2016 | Aluminium and aluminium alloys - Sheet, strip and plate - Part 1: Technical conditions for inspection and delivery |
EN ISO 3834-3:2005 | Quality requirements for fusion welding of metallic materials - Part 3: Standard quality requirements (ISO 3834-3:2005) |
ISO 2553:2013 | Welding and allied processes Symbolic representation on drawings Welded joints |
EN 1337-6:2004 | Structural bearings - Part 6: Rocker bearings |
EN 755-1:2016 | Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 1: Technical conditions for inspection and delivery |
EN ISO 10511:2012 | Prevailing torque type hexagon thin nuts (with non-metallic insert) (ISO 10511:2012) |
ISO 13918:2008 | Welding Studs and ceramic ferrules for arc stud welding |
EN 754-3:2008 | Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 3: Round bars, tolerances on dimensions and form |
ISO 15974:2000 | Closed end blind rivets with break pull mandrel and countersunk head AlA/St |
ISO 15480:1999 | Hexagon washer head drilling screws with tapping screw thread |
EN ISO 7049:2011 | Cross-recessed pan head tapping screws (ISO 7049:2011) |
ISO 6520-1:2007 | Welding and allied processes Classification of geometric imperfections in metallic materials Part 1: Fusion welding |
EN 754-7:2016 | Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 7: Seamless tubes, tolerances on dimensions and form |
ISO 1479:2011 | Hexagon head tapping screws |
EN ISO 3834-2:2005 | Quality requirements for fusion welding of metallic materials - Part 2: Comprehensive quality requirements (ISO 3834-2:2005) |
EN ISO 7091 : 2000 | PLAIN WASHERS - NORMAL SERIES - PRODUCT GRADE C |
EN 755-5:2008 | Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 5: Rectangular bars, tolerances on dimensions and form |
EN ISO 6789:2003 | Assembly tools for screws and nuts - Hand torque tools - Requirements and test methods for design conformance testing, quality conformance testing and recalibration procedure (ISO 6789:2003) |
EN ISO 7040:2012 | Prevailing torque type hexagon regular nuts (with non-metallic insert) - Property classes 5, 8 and 10 (ISO 7040:2012) |
EN 1301-1:2008 | Aluminium and aluminium alloys - Drawn wire - Part 1: Technical conditions for inspection and delivery |
ISO 13920:1996 | Welding — General tolerances for welded constructions — Dimensions for lengths and angles — Shape and position |
EN ISO 7094:2000/AC:2002 | PLAIN WASHERS - EXTRA LARGE SERIES - PRODUCT GRADE C |
EN 14399-3:2015 | High-strength structural bolting assemblies for preloading - Part 3: System HR - Hexagon bolt and nut assemblies |
ISO 9606-2:2004 | Qualification test of welders — Fusion welding — Part 2: Aluminium and aluminium alloys |
EN 12487:2007/AC:2008 | CORROSION PROTECTION OF METALS - RINSED AND NON-RINSED CHROMATE CONVERSION COATINGS ON ALUMINIUM AND ALUMINIUM ALLOYS |
EN ISO 7093-2 : 2000 | PLAIN WASHERS - LARGE SERIES - PART 2: PRODUCT GRADE C |
ISO 7042:2012 | Prevailing torque type all-metal hexagon high nuts — Property classes 5, 8, 10 and 12 |
ISO 3506-1:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners Part 1: Bolts, screws and studs |
ISO 10042:2005 | Welding Arc-welded joints in aluminium and its alloys Quality levels for imperfections |
ISO 3834-4:2005 | Quality requirements for fusion welding of metallic materials Part 4: Elementary quality requirements |
EN ISO 15613:2004 | Specification and qualification of welding procedures for metallic materials - Qualification based on pre-production welding test (ISO 15613:2004) |
EN 573-2:1994 | Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 2: Chemical symbol based designation system |
EN 1337-4:2004/AC:2007 | STRUCTURAL BEARINGS - PART 4: ROLLER BEARINGS |
ISO 15614-2:2005 | Specification and qualification of welding procedures for metallic materials Welding procedure test Part 2: Arc welding of aluminium and its alloys |
ISO 10642:2004 | Hexagon socket countersunk head screws |
EN 1011-4:2000/A1:2003 | WELDING - RECOMMENDATIONS FOR WELDING OF METALLIC MATERIALS - PART 4: ARC WELDING OF ALUMINIUM AND ALUMINIUM ALLOYS |
EN 1321:1996 | Destructive tests on welds in metallic materials - Macroscopic and microscopic examination of welds |
EN ISO 3506-1:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners - Part 1: Bolts, screws and studs (ISO 3506-1:2009) |
EN ISO 4288 : 1997 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - RULES AND PROCEDURES FOR THE ASSESSMENT OF SURFACE TEXTURE |
EN 485-3:2003 | Aluminium and aluminium alloys - Sheet, strip and plate - Part 3: Tolerances on dimensions and form for hot-rolled products |
EN ISO 15612:2004 | Specification and qualification of welding procedures for metallic materials - Qualification by adoption of a standard welding procedure (ISO 15612:2004) |
EN 755-9:2016 | Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 9: Profiles, tolerances on dimensions and form |
ISO 4016:2011 | Hexagon head bolts Product grade C |
EN ISO 3834-4:2005 | Quality requirements for fusion welding of metallic materials - Part 4: Elementary quality requirements (ISO 3834-4:2005) |
EN ISO 7042:2012 | Prevailing torque type all-metal hexagon high nuts - Property classes 5, 8, 10 and 12 (ISO 7042:2012) |
EN ISO 15977 : 2002 | OPEN END BLIND RIVETS WITH BREAK PULL MANDREL AND PROTRUDING HEAD ALA/ST |
ISO 4034:2012 | Hexagon regular nuts (style 1) Product grade C |
CR ISO 17663 : 2001 | WELDING - GUIDELINES FOR QUALITY REQUIREMENTS FOR HEAT TREATMENT IN CONNECTION WITH WELDING AND ALLIED PROCESSES |
EN ISO 1481:2011 | Slotted pan head tapping screws (ISO 1481:2011) |
EN 485-4:1993 | Aluminium and aluminium alloys - Sheet, strip and plate - Part 4: Tolerances on shape and dimensions for cold-rolled products |
EN 755-3:2008 | Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 3: Round bars, tolerances on dimensions and form |
ISO 2320:2015 | Fasteners Prevailing torque steel nuts Functional properties |
EN 1714:1997/A2:2003 | NON-DESTRUCTIVE TESTING OF WELDS - ULTRASONIC TESTING OF WELDED JOINTS |
EN ISO 7090 : 2000 | PLAIN WASHERS, CHAMFERED - NORMAL SERIES - PRODUCT GRADE A (ISO 7090:2000) |
EN 1999-1-1:2007/A2:2013 | EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 1-1: GENERAL STRUCTURAL RULES |
ISO 17123-7:2005 | Optics and optical instruments Field procedures for testing geodetic and surveying instruments Part 7: Optical plumbing instruments |
ISO 10509:2012 | Hexagon flange head tapping screws |
EN 1011-1:2009 | Welding - Recommendations for welding of metallic materials - Part 1: General guidance for arc welding |
ISO 14731:2006 | Welding coordination Tasks and responsibilities |
EN 1999-1-4:2007/A1:2011 | EUROCODE 9 - DESIGN OF ALUMINIUM STRUCTURES - PART 1-4: COLD-FORMED STRUCTURAL SHEETING |
EN ISO 7719:2012 | Prevailing torque type all-metal hexagon regular nuts - Property classes 5, 8 and 10 (ISO 7719:2012) |
ISO 7049:2011 | Cross-recessed pan head tapping screws |
EN 755-8:2016 | Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 8: Porthole tubes, tolerances on dimensions and form |
ISO 7976-2:1989 | Tolerances for building — Methods of measurement of buildings and building products — Part 2: Position of measuring points |
EN ISO 2009:2011 | Slotted countersunk flat head screws - Product grade A (ISO 2009:2011) |
EN ISO 4063:2010 | Welding and allied processes - Nomenclature of processes and reference numbers (ISO 4063:2009, Corrected version 2010-03-01) |
EN 755-4:2008 | Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 4: Square bars, tolerances on dimensions and form |
ISO/TR 17663:2001 | Welding Guidelines for quality requirements for heat treatment in connection with welding and allied processes |
EN ISO 7093-1 : 2000 | PLAIN WASHERS - LARGE SERIES - PART 1: PRODUCT GRADE A (ISO 7093-1:2000) |
ISO 4017:2014 | Fasteners Hexagon head screws Product grades A and B |
EN ISO 4016:2011 | Hexagon head bolts - Product grade C (ISO 4016:2011) |
EN ISO 4014:2011 | Hexagon head bolts - Product grades A and B (ISO 4014:2011) |
EN 20898-2 : 1993 | MECHANICAL PROPERTIES OF FASTENERS - PART 2: NUTS WITH SPECIFIED PROOF LOAD VALUES - COARSE THREAD (ISO 898-2:1992) |
ISO 4032:2012 | Hexagon regular nuts (style 1) — Product grades A and B |
ISO 18273:2015 | Welding consumables Wire electrodes, wires and rods for welding of aluminium and aluminium alloys Classification |
EN 586-3:2001 | Aluminium and aluminium alloys - Forgings - Part 3: Tolerances on dimensions and form |
ISO 9013:2017 | Thermal cutting — Classification of thermal cuts — Geometrical product specification and quality tolerances |
EN 755-7:2016 | Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 7: Seamless tubes, tolerances on dimensions and form |
EN ISO 9018:2015 | DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS - TENSILE TEST ON CRUCIFORM AND LAPPED JOINTS (ISO 9018:2015) |
EN 1999-1-5:2007/AC:2009 | EUROCODE 9 - DESIGN OF ALUMINIUM STRUCTURES - PART 1-5: SHELL STRUCTURES |
EN 473:2008 | Non-destructive testing - Qualification and certification of NDT personnel - General principles |
ISO 17123-3:2001 | Optics and optical instruments Field procedures for testing geodetic and surveying instruments Part 3: Theodolites |
ISO 15481:1999 | Cross recessed pan head drilling screws with tapping screw thread |
EN 1337-8:2007 | Structural bearings - Part 8: Guide Bearings and Restraint Bearings |
EN 12020-2:2016/AC:2017 | ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED PRECISION PROFILES IN ALLOYS EN AW-6060 AND EN AW-6063 - PART 2: TOLERANCES ON DIMENSIONS AND FORM |
EN 1301-3:2008 | Aluminium and aluminium alloys - Drawn wire - Part 3: Tolerances on dimensions |
EN 754-6:2008 | Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 6: Hexagonal bars, tolerances on dimensions and form |
ISO 15612:2004 | Specification and qualification of welding procedures for metallic materials Qualification by adoption of a standard welding procedure |
EN ISO 4034:2012/AC:2013 | HEXAGON REGULAR NUTS (STYLE 1) - PRODUCT GRADE C (ISO 4034:2012/COR 1:2013) |
EN 755-6:2008 | Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 6: Hexagonal bars, tolerances on dimensions and form |
ISO 4762:2004 | Hexagon socket head cap screws |
EN 1337-11:1997 | Structural bearings - Part 11: Transport, storage and installation |
ISO 15977:2002 | Open end blind rivets with break pull mandrel and protruding head — AIA/St |
EN ISO 4018:2011 | Hexagon head screws - Product grade C (ISO 4018:2011) |
ISO 15609-1:2004 | Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 1: Arc welding |
EN ISO 13920:1996 | Welding - General tolerances for welded constructions - Dimensions for lengths and angles - Shape and position (ISO 13920:1996) |
ISO 15978:2002 | Open end blind rivets with break pull mandrel and countersunk head — AIA/St |
ISO 1481:2011 | Slotted pan head tapping screws |
EN 12373-1 : 2001 | ALUMINIUM AND ALUMINIUM ALLOYS - ANODIZING - PART 1: METHOD FOR SPECIFYING DECORATIVE AND PROTECTIVE ANODIC OXIDATION COATINGS ON ALUMINIUM |
ISO 7089:2000 | Plain washers Normal series Product grade A |
ISO 3834-2:2005 | Quality requirements for fusion welding of metallic materials Part 2: Comprehensive quality requirements |
EN 1706:2010 | Aluminium and aluminium alloys - Castings - Chemical composition and mechanical properties |
EN ISO 15974 : 2000 | CLOSED END BLIND RIVETS WITH BREAK PULL MANDREL AND COUNTERSUNK HEAD - ALA/ST |
ISO 4463-1:1989 | Measurement methods for building — Setting-out and measurement — Part 1: Planning and organization, measuring procedures, acceptance criteria |
ISO 7719:2012 | Prevailing torque type all-metal hexagon regular nuts — Property classes 5, 8 and 10 |
ISO 15973:2000 | Closed end blind rivets with break pull mandrel and protruding head AlA/St |
ISO 2009:2011 | Slotted countersunk flat head screws Product grade A |
EN 22553:1994 | Welded, brazed and soldered joints - Symbolic representation on drawings (ISO 2553:1992) |
EN ISO 15614-2:2005 | Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 2: Arc welding of aluminium and its alloys (ISO 15614-2:2005) |
ISO 7091:2000 | Plain washers Normal series Product grade C |
EN 754-1:2016 | Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 1: Technical conditions for inspection and delivery |
EN ISO 2320:2015 | Fasteners - Prevailing torque steel nuts - Functional properties (ISO 2320:2015) |
EN ISO 9606-2:2004 | Qualification test of welders - Fusion welding - Part 2: Aluminium and aluminium alloys (ISO 9606-2:2004) |
EN ISO 10513:2012 | Prevailing torque type all-metal hexagon high nuts with metric fine pitch thread - Property classes 8, 10 and 12 (ISO 10513:2012) |
EN 1559-1:2011 | Founding - Technical conditions of delivery - Part 1: General |
ISO 10513:2012 | Prevailing torque type all-metal hexagon high nuts with metric fine pitch thread — Property classes 8, 10 and 12 |
EN 14399-6:2015 | High-strength structural bolting assemblies for preloading - Part 6: Plain chamfered washers |
EN 515:2017 | Aluminium and aluminium alloys - Wrought products - Temper designations |
ISO 10512:2012 | Prevailing torque type hexagon regular nuts (with non-metallic insert) with metric fine pitch thread — Property classes 6, 8 and 10 |
EN 754-5:2008 | Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 5: Rectangular bars, tolerances on dimensions and form |
ISO 7040:2012 | Prevailing torque type hexagon regular nuts (with non-metallic insert) — Property classes 5, 8 and 10 |
EN ISO 7046-2:2011 | Countersunk flat head screws (common head style) with type H or type Z cross recess - Product grade A - Part 2: Steel screws of property class 8.8, stainless steel screws and non-ferrous metal screws (ISO 7046-2:2011) |
EN ISO 18273:2015 | WELDING CONSUMABLES - WIRE ELECTRODES, WIRES AND RODS FOR WELDING OF ALUMINIUM AND ALUMINIUM ALLOYS - CLASSIFICATION (ISO 18273:2015) |
EN 1337-3:2005 | Structural bearings - Part 3: Elastomeric bearings |
EN ISO 14731:2006 | Welding coordination - Tasks and responsibilities (ISO 14731:2006) |
EN 10204:2004 | Metallic products - Types of inspection documents |
EN 586-1:1997 | Aluminium and aluminium alloys - Forgings - Part 1: Technical conditions for inspection and delivery |
EN ISO 4017:2014 | Fasteners - Hexagon head screws - Product grades A and B (ISO 4017:2014) |
EN ISO 15609-1:2004 | Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 1: Arc welding (ISO 15609-1:2004) |
EN ISO 10642:2004/A1:2012 | HEXAGON SOCKET COUNTERSUNK HEAD SCREWS (ISO 10642:2004/AMD 1:2012) |
EN 754-8:2016 | Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 8: Porthole tubes, tolerances on dimensions and form |
EN 14399-4:2015 | High-strength structural bolting assemblies for preloading - Part 4: System HV - Hexagon bolt and nut assemblies |
EN ISO 898-1:2013 | Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread (ISO 898-1:2013) |
EN 1090-2:2008+A1:2011 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
ISO 9000:2015 | Quality management systems — Fundamentals and vocabulary |
ISO 7976-1:1989 | Tolerances for building — Methods of measurement of buildings and building products — Part 1: Methods and instruments |
ISO 6789:2003 | Assembly tools for screws and nuts Hand torque tools Requirements and test methods for design conformance testing, quality conformance testing and recalibration procedure |
EN 12206-1:2004 | Paints and varnishes - Coating of aluminium and aluminium alloys for architectural purposes - Part 1: Coatings prepared from coating powder |
EN 14399-7:2007 | High-strength structural bolting assemblies for preloading - Part 7: System HR - Countersunk head bolt and nut assemblies |
EN ISO 4032:2012 | Hexagon regular nuts (style 1) - Product grades A and B (ISO 4032:2012) |
EN 1999-1-2:2007/AC:2009 | EUROCODE 9 - DESIGN OF ALUMINIUM STRUCTURES - PART 1-2: STRUCTURAL FIRE DESIGN |
ISO 7093-2:2000 | Plain washers Large series Part 2: Product grade C |
EN 14399-5:2015 | High-strength structural bolting assemblies for preloading - Part 5: Plain washers |
ISO 15613:2004 | Specification and qualification of welding procedures for metallic materials Qualification based on pre-production welding test |
ISO 4063:2009 | Welding and allied processes — Nomenclature of processes and reference numbers |
EN ISO 15480 : 1999 | HEXAGON WASHER HEAD DRILLING SCREWS WITH TAPPING SCREW THREAD |
EN 1559-4:2015 | Founding - Technical conditions of delivery - Part 4: Additional requirements for aluminium alloy castings |
ISO 17123-4:2012 | Optics and optical instruments — Field procedures for testing geodetic and surveying instruments — Part 4: Electro-optical distance meters (EDM measurements to reflectors) |
EN 28839 : 1991 | MECHANICAL PROPERTIES OF FASTENERS - BOLTS, SCREWS, STUDS AND NUTS MADE OF NON-FERROUS METALS (ISO 8839:1986) |
EN ISO 9013:2017 | Thermal cutting - Classification of thermal cuts - Geometrical product specification and quality tolerances (ISO 9013:2017) |
EN 571-1:1997 | Non destructive testing - Penetrant testing - Part 1: General principles |
ISO 17123-1:2014 | Optics and optical instruments — Field procedures for testing geodetic and surveying instruments — Part 1: Theory |
EN 1418:1997 | Welding personnel - Approval testing of welding operators for fusion welding and resistance weld setters for fully mechanized and automatic welding of metallic materials |
EN ISO 7089 : 2000 | PLAIN WASHERS - NORMAL SERIES - PRODUCT GRADE A |
ISO 3506-2:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners Part 2: Nuts |
EN 970:1997 | Non-destructive examination of fusion welds - Visual examination |
EN 1337-5:2005 | Structural bearings - Part 5: Pot bearings |
EN ISO 15973 : 2000 | CLOSED END BLIND RIVETS WITH BREAK PULL MANDREL AND PROTRUDING HEAD - ALA/ST |
ISO 15981:2002 | Open end blind rivets with break pull mandrel and protruding head — AIA/AIA |
EN ISO 15978 : 2002 | OPEN END BLIND RIVETS WITH BREAK PULL MANDREL AND COUNTERSUNK HEAD ALA/ST |
EN 754-4:2008 | Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 4: Square bars, tolerances on dimensions and form |
ISO 7046-2:2011 | Countersunk flat head screws (common head style) with type H or type Z cross recess Product grade A Part 2: Steel screws of property class 8.8, stainless steel screws and non-ferrous metal screws |
EN ISO 10512:2012 | Prevailing torque type hexagon regular nuts (with non-metallic insert) with metric fine pitch thread - Property classes 6, 8 and 10 (ISO 10512:2012) |
EN 573-3:2013 | Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 3: Chemical composition and form of products |
EN ISO 17659:2004 | Welding - Multilingual terms for welded joints with illustrations (ISO 17659:2002) |
ISO 17659:2002 | Welding — Multilingual terms for welded joints with illustrations |
EN 573-1:2004 | Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 1: Numerical designation system |
ISO 3834-3:2005 | Quality requirements for fusion welding of metallic materials Part 3: Standard quality requirements |
EN ISO 9000:2015 | Quality management systems - Fundamentals and vocabulary (ISO 9000:2015) |
EN 1999-1-3:2007/A1:2011 | EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 1-3: STRUCTURES SUSCEPTIBLE TO FATIGUE |
EN 15088:2005 | Aluminium and aluminium alloys - Structural products for construction works - Technical conditions for inspection and delivery |
EN 12020-1:2008 | Aluminium and aluminium alloys - Extruded precision profiles in alloys EN AW-6060 and EN AW-6063 - Part 1: Technical conditions for inspection and delivery |
EN 1435:1997/A2:2003 | NON-DESTRUCTIVE TESTING OF WELDS - RADIOGRAPHIC TESTING OF WELDED JOINTS |
ISO 8062:1994 | Castings System of dimensional tolerances and machining allowances |
EN ISO 4762:2004 | Hexagon socket head cap screws (ISO 4762:2004) |
EN 14399-2:2015 | High-strength structural bolting assemblies for preloading - Part 2: Suitability for preloading |
ISO 898-1:2013 | Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread |
ISO 4014:2011 | Hexagon head bolts Product grades A and B |
ISO 4018:2011 | Hexagon head screws Product grade C |
EN 1320:1996 | Destructive tests on welds in metallic materials - Fracture test |
ISO 7093-1:2000 | Plain washers Large series Part 1: Product grade A |
EN ISO 3506-2:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners - Part 2: Nuts (ISO 3506-2:2009) |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.