|
IEC 60243-1:2013
|
Electric strength of insulating materials - Test methods - Part 1: Tests at power frequencies
|
|
EN 13480-6:2017
|
Metallic industrial piping - Part 6: Additional requirements for buried piping
|
|
EN 13160-7:2016
|
Leak detection systems - Part 7: Requirements and test/assessment methods for interstitial spaces, leak detection linings and leak detection jackets
|
|
EN 13480-2:2017
|
Metallic industrial piping - Part 2: Materials
|
|
EN 1555-1:2010
|
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 1: General
|
|
EN 1555-3:2010+A1:2012
|
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 3: Fittings
|
|
ISO/IEC Guide 62:1996
|
General requirements for bodies operating assessment and certification/registration of quality systems
|
|
EN 12201-4:2012
|
Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 4: Valves
|
|
EN 61340-5-1:2016/AC:2017-05
|
ELECTROSTATICS - PART 5-1: PROTECTION OF ELECTRONIC DEVICES FROM ELECTROSTATIC PHENOMENA - GENERAL REQUIREMENTS (IEC 61340-5-1:2016/COR1:2017)
|
|
DIN IEC 60093 : 1993
|
METHODS OF TEST FOR INSULATING MATERIALS FOR ELECTRICAL PURPOSES; VOLUME RESISTIVITY AND SURFACE RESISTIVITY OF SOLID ELECTRICAL INSULATING MATERIALS
|
|
EN 13480-4:2017
|
Metallic industrial piping - Part 4: Fabrication and installation
|
|
ISO 1167-2:2006
|
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids — Determination of the resistance to internal pressure — Part 2: Preparation of pipe test pieces
|
|
EN ISO 11306 : 1998
|
CORROSION OF METALS AND ALLOYS - GUIDELINES FOR EXPOSING AND EVALUATING METALS AND ALLOYS IN SURFACE SEA WATER
|
|
EN 12201-3:2011+A1:2012
|
Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 3: Fittings
|
|
EN 13160-2:2016
|
Leak detection systems - Part 2: Requirements and test/assessment methods for pressure and vacuum systems
|
|
IEC 61340-5-1:2016
|
Electrostatics - Part 5-1: Protection of electronic devices from electrostatic phenomena - General requirements
|
|
EN 13463-1:2009
|
Non-electrical equipment for use in potentially explosive atmospheres - Part 1: Basic method and requirements
|
|
EN ISO 16871:2003
|
Plastics piping and ducting systems - Plastics pipes and fittings - Method for exposure to direct (natural) weathering (ISO 16871:2003)
|
|
EN ISO 1167-2:2006
|
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 2: Preparation of pipe test pieces (ISO 1167-2:2006)
|
|
EN ISO 1167-1:2006
|
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 1: General method (ISO 1167-1:2006)
|
|
ISO 1167-4:2007
|
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids Determination of the resistance to internal pressure Part 4: Preparation of assemblies
|
|
ISO 9080:2012
|
Plastics piping and ducting systems — Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation
|
|
ISO 17456:2006
|
Plastics piping systems Multilayer pipes Determination of long-term strength
|
|
ISO 11306:1998
|
Corrosion of metals and alloys Guidelines for exposing and evaluating metals and alloys in surface sea water
|
|
EN 13480-1:2017
|
Metallic industrial piping - Part 1: General
|
|
EN ISO 9080:2012
|
Plastics piping and ducting systems - Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation (ISO 9080:2012)
|
|
EN 15376:2014
|
Automotive fuels - Ethanol as a blending component for petrol - Requirements and test methods
|
|
EN 28510-1:2014
|
Adhesives - Peel test for a flexible-bonded-to-rigid test specimen assembly - Part 1: 90º peel
|
|
EN 13480-3:2017
|
Metallic industrial piping - Part 3: Design and calculation
|
|
ISO 11922-1:1997
|
Thermoplastics pipes for the conveyance of fluids — Dimensions and tolerances — Part 1: Metric series
|
|
ISO 11339:2010
|
Adhesives T-peel test for flexible-to-flexible bonded assemblies
|
|
IEC 60093:1980
|
Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials
|
|
ISO 16871:2003
|
Plastics piping and ducting systems — Plastics pipes and fittings — Method for exposure to direct (natural) weathering
|
|
EN ISO 1167-4:2007
|
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 4: Preparation of assemblies (ISO 1167-4:2007)
|
|
EN ISO 9001:2015
|
Quality management systems - Requirements (ISO 9001:2015)
|
|
EN 12201-5:2011
|
Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 5: Fitness for purpose of the system
|
|
ISO 1167-3:2007
|
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids Determination of the resistance to internal pressure Part 3: Preparation of components
|
|
EN 1555-4:2011
|
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 4: Valves
|
|
ISO 8510-2:2006
|
Adhesives Peel test for a flexible-bonded-to-rigid test specimen assembly Part 2: 180 peel
|
|
EN 13636:2004
|
Cathodic protection of buried metallic tanks and related piping
|
|
EN 60243-1:2013
|
ELECTRIC STRENGTH OF INSULATING MATERIALS - TEST METHODS - PART 1: TESTS AT POWER FREQUENCIES (IEC 60243-1:2013)
|
|
ISO 9001:2015
|
Quality management systems — Requirements
|
|
EN 12201-2:2011+A1:2013
|
Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 2: Pipes
|
|
EN 1555-5:2010
|
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 5: Fitness for purpose of the system
|
|
EN 12295:1999
|
Plastics piping systems - Thermoplastics pipes and associated fittings for hot and cold water - Test method for resistance of joints to pressure cycling
|
|
EN 1555-2:2010
|
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 2: Pipes
|
|
ISO 4892-2:2013
|
Plastics — Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps
|
|
IEC 60243-2:2013
|
Electric strength of insulating materials - Test methods - Part 2: Additional requirements for tests using direct voltage
|
|
ISO 6259-3:2015
|
Thermoplastics pipes Determination of tensile properties Part 3: Polyolefin pipes
|
|
ISO 8510-1:1990
|
Adhesives Peel test for a flexible-bonded-to-rigid test specimen assembly Part 1: 90 degree peel
|
|
EN 12294:1999
|
Plastics piping systems - Systems for hot and cold water - Test method for leaktightness under vacuum
|
|
EN ISO 11339:2010
|
Adhesives - T-peel test for flexible-to-flexible bonded assemblies (ISO 11339:2010)
|
|
EN 12201-1:2011
|
Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 1: General
|
|
EN 13480-5:2017
|
Metallic industrial piping - Part 5: Inspection and testing
|
|
EN 45012 : 1998
|
GENERAL REQUIREMENTS FOR BODIES OPERATING ASSESSMENT AND CERTIFICATION/REGISTRATION OF QUALITY SYSTEMS
|
|
EN 60243-2:2014
|
Electric strength of insulating materials - Test methods - Part 2: Additional requirements for tests using direct voltage
|
|
EN 13160-1:2016
|
Leak detection systems - Part 1: General Principles
|
|
EN ISO 1167-3:2007
|
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 3: Preparation of components (ISO 1167-3:2007)
|
|
ISO 1817:2015
|
Rubber, vulcanized or thermoplastic Determination of the effect of liquids
|
|
1997/23/EC : 1997
|
DIRECTIVE 97/23/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 29 MAY 1997 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES CONCERNING PRESSURE EQUIPMENT
|
|
ISO 1167-1:2006
|
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids Determination of the resistance to internal pressure Part 1: General method
|
Important note : All end users must be registered with an Account prior to user licenses being assigned.