IEC 60112:2003+AMD1:2009 CSV
|
Method for the determination of the proof and the comparative tracking indices of solid insulating materials
|
IEC 61936-1:2010+AMD1:2014 CSV
|
Power installations exceeding 1 kV a.c. - Part 1: Common rules
|
EN 62271-1:2017
|
High-voltage switchgear and controlgear - Part 1: Common specifications for alternating current switchgear and controlgear
|
IEC 60099-4:2014
|
Surge arresters - Part 4: Metal-oxide surge arresters without gaps for a.c. systems
|
EN 60060-1:2010
|
High-voltage test techniques - Part 1: General definitions and test requirements
|
IEC 60383-1:1993
|
Insulators for overhead lines with a nominal voltage above 1000 V - Part 1: Ceramic or glass insulator units for a.c. systems - Definitions, test methods and acceptance criteria
|
EN 50153 : 2014 AMD 1 2017
|
RAILWAY APPLICATIONS - ROLLING STOCK - PROTECTIVE PROVISIONS RELATING TO ELECTRICAL HAZARDS
|
IEC 61109:2008
|
Insulators for overhead lines - Composite suspension and tension insulators for a.c. systems with a nominal voltage greater than 1 000 V - Definitions, test methods and acceptance criteria
|
IEC 60660:1999
|
Insulators - Tests on indoor post insulators of organic material for systems with nominal voltages greater than 1 000 V up to but not including 300 kV
|
EN 60660:1999
|
Insulators - Tests on indoor post insulators of organic material for systems with nominal voltages greater than 1 kV up to but not including 300 kV
|
EN 60099-4:2014
|
Surge arresters - Part 4: Metal-oxide surge arresters without gaps for a.c. systems
|
EN 60383-1:1996/A11:1999
|
INSULATORS FOR OVERHEAD LINES WITH A NOMINAL VOLTAGE ABOVE 1 KV - CERAMIC OR GLASS INSULATOR UNITS FOR A.C. SYSTEMS - DEFINITIONS, TEST METHODS AND ACCEPTANCE CRITERIA
|
EN 60099-1:1994/A1:1999
|
SURGE ARRESTERS - PART 1: NON-LINEAR RESISTOR TYPE GAPPED SURGE ARRESTERS FOR A.C. SYSTEMS
|
EN 60947-1:2007/A2:2014
|
LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: GENERAL RULES (IEC 60947-1:2007/A2:2014)
|
EN 60587:2007
|
Electrical insulating materials used under severe ambient conditions - Test methods for evaluating resistance to tracking and erosion
|
EN 60112 : 2003 AMD 1 2009
|
METHOD FOR THE DETERMINATION OF THE PROOF AND THE COMPARATIVE TRACKING INDICES OF SOLID INSULATING MATERIALS
|
EN 60507:2014
|
Artificial pollution tests on high-voltage ceramic and glass insulators to be used on a.c. systems
|
EN 61936-1 : 2010 AMD 1 2014
|
POWER INSTALLATIONS EXCEEDING 1 KV A.C. - PART 1: COMMON RULES (IEC 61936-1:2010/A1:2014)
|
EN 50119 : 2009 AMD 1 2013
|
RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRIC TRACTION OVERHEAD CONTACT LINES
|
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV
|
Degrees of protection provided by enclosures (IP Code)
|
IEC TS 61245:2015
|
Artificial pollution tests on high-voltage ceramic and glass insulators to be used on d.c. systems
|
EN 50129 : 2003 COR 2010
|
RAILWAY APPLICATIONS - COMMUNICATION, SIGNALLING AND PROCESSING SYSTEMS - SAFETY RELATED ELECTRONIC SYSTEMS FOR SIGNALLING
|
IEC 60099-1:1991+AMD1:1999 CSV
|
Surge arresters - Part 1: Non-linear resistor type gapped surge arresters for a.c. systems
|
IEC 60947-1:2007+AMD1:2010+AMD2:2014 CSV
|
Low-voltage switchgear and controlgear - Part 1: General rules
|
EN 60664-1:2007
|
Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests
|
EN 60071-1:2006/A1:2010
|
INSULATION CO-ORDINATION - PART 1: DEFINITIONS, PRINCIPLES AND RULES
|
IEC 60664-5:2007
|
Insulation coordination for equipment within low-voltage systems - Part 5: Comprehensive method for determining clearances and creepage distances equal to or less than 2 mm
|
EN 50163 : 2004 COR 2013
|
RAILWAY APPLICATIONS - SUPPLY VOLTAGES OF TRACTION SYSTEMS
|
IEC 62271-1:2017
|
High-voltage switchgear and controlgear - Part 1: Common specifications for alternating current switchgear and controlgear
|
IEC 60071-2:1996
|
Insulation co-ordination - Part 2: Application guide
|
EN 60071-2:1997
|
Insulation co-ordination - Part 2: Application guide
|
EN 60168:1994/A2:2000
|
TESTS ON INDOOR AND OUTDOOR POST INSULATORS OF CERAMIC MATERIAL OR GLASS FOR SYSTEMS WITH NOMINAL VOLTAGES GREATER THAN 1KV
|
IEC 60664-3:2016
|
Insulation coordination for equipment within low-voltage systems - Part 3: Use of coating, potting or moulding for protection against pollution
|
IEC 60587:2007
|
Electrical insulating materials used under severe ambient conditions - Test methods for evaluating resistance to tracking and erosion
|
EN 61109:2008
|
Insulators for overhead lines - Composite suspension and tension insulators for a.c. systems with a nominal voltage greater than 1 000 V - Definitions, test methods and acceptance criteria
|
EN 60529:1991/AC:2016-12
|
DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015)
|
IEC 60060-1:2010
|
High-voltage test techniques - Part 1: General definitions and test requirements
|
IEC 60507:2013
|
Artificial pollution tests on high-voltage ceramic and glass insulators to be used on a.c. systems
|
EN 60664-5:2007
|
Insulation coordination for equipment within low-voltage systems - Part 5: Comprehensive method for determining clearances and creepage distances equal to or less than 2 mm
|
IEC 60071-1:2006+AMD1:2010 CSV
|
Insulation co-ordination - Part 1: Definitions, principles and rules
|
IEC 60077-1:2017
|
Railway applications - Electric equipment for rolling stock - Part 1: General service conditions and general rules
|
IEC 60664-1:2007
|
Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests
|
EN 60664-3:2017
|
Insulation coordination for equipment within low-voltage systems - Part 3: Use of coating, potting or moulding for protection against pollution
|
IEC 60383-2:1993
|
Insulators for overhead lines with a nominal voltage above 1000 V - Part 2: Insulator strings and insulator sets for a.c. systems - Definitions, test methods and acceptance criteria
|
EN 60383-2:1995
|
Insulators for overhead lines with a nominal voltage above 1 kV - Part 2: Insulator strings and insulator sets for a.c. systems - Definitions, test methods and acceptance criteria
|
IEC 60168:1994+AMD1:1997+AMD2:2000 CSV
|
Tests on indoor and outdoor post insulators of ceramic material or glass for systems with nominal voltages greater than 1000 V
|