|
IEC 60112:2003+AMD1:2009 CSV
|
Method for the determination of the proof and the comparative tracking indices of solid insulating materials
|
|
EN 60999-2:2003
|
Connecting devices - Electrical copper conductors - Safety requirements for screw-type and screwless-type clamping units - Part 2: Particular requirements for clamping units for conductors above 35 mm² up to 300 mm² (included)
|
|
IEC 60079-1:2014 RLV
|
Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d"
|
|
IEC 61347-2-3:2011+AMD1:2016 CSV
|
Lamp control gear - Part 2-3: Particular requirements for a.c. and/or d.c. supplied electronic control gear for fluorescent lamps
|
|
IEC 60238:2016+AMD1:2017 CSV
|
Edison screw lampholders
|
|
IEC 60947-7-2:2009
|
Low-voltage switchgear and controlgear - Part 7-2: Ancillary equipment - Protective conductor terminal blocks for copper conductors
|
|
IEC 60228:2004
|
Conductors of insulated cables
|
|
EN 60079-1:2014
|
Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d"
|
|
EN 61048:2006/A1:2016
|
AUXILIARIES FOR LAMPS - CAPACITORS FOR USE IN TUBULAR FLUORESCENT AND OTHER DISCHARGE LAMP CIRCUITS - GENERAL AND SAFETY REQUIREMENTS (IEC 61048:2006/A1:2015)
|
|
EN 60238 : 2004 AMD 2 2011
|
EDISON SCREW LAMPHOLDERS (IEC 60238:2004/A2:2011)
|
|
EN 61347-2-9:2013
|
Lamp controlgear - Part 2-9: Particular requirements for electromagnetic controlgear for discharge lamps (excluding fluorescent lamps)
|
|
IEC 60068-2-27:2008
|
Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock
|
|
IEC 61048:2006+AMD1:2015 CSV
|
Auxiliaries for lamps - Capacitors for use in tubular fluorescent and other discharge lamp circuits - General and safety requirements
|
|
EN 60034-1:2010/corrigendum Oct. 2010
|
ROTATING ELECTRICAL MACHINES - PART 1: RATING AND PERFORMANCE
|
|
IEC 60998-2-4:2004
|
Connecting devices for low-voltage circuits for household and similar purposes - Part 2-4: Particular requirements for twist-on connecting devices
|
|
EN 60079-0:2012/A11:2013
|
EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS (IEC 60079-0:2011, MODIFIED)
|
|
IEC 60079-17:2013
|
Explosive atmospheres - Part 17: Electrical installations inspection and maintenance
|
|
IEC 61347-2-9:2012
|
Lamp controlgear - Part 2-9: Particular requirements for electromagnetic controlgear for discharge lamps (excluding fluorescent lamps)
|
|
IEC 60050-411:1996
|
International Electrotechnical Vocabulary (IEV) - Part 411: Rotating machinery
|
|
IEC 60999-2:2003
|
Connecting devices - Electrical copper conductors - Safety requirements for screw-type and screwless-type clamping units - Part 2: Particular requirements for clamping units for conductors above 35 mm2 up to 300 mm2 (included)
|
|
IEC 60079-18:2014 RLV
|
Explosive atmospheres - Part 18: Equipment protection by encapsulation “m”
|
|
EN 60400:2017
|
Lampholders for tubular fluorescent lamps and starterholders
|
|
IEC 61347-1:2015 RLV
|
Lamp controlgear - Part 1: General and safety requirements
|
|
EN 60228:2005 COR 2005
|
CONDUCTORS OF INSULATED CABLES
|
|
EN 61347-2-1:2001/A2:2014
|
LAMP CONTROLGEAR - PART 2-1: PARTICULAR REQUIREMENTS FOR STARTING DEVICES (OTHER THAN GLOW STARTERS) (IEC 61347-2-1:2000/A2:2013)
|
|
EN 61347-2-4:2001/corrigendum:2010
|
LAMP CONTROLGEAR - PART 2-4: PARTICULAR REQUIREMENTS FOR D.C. SUPPLIED ELECTRONIC BALLASTS FOR GENERAL LIGHTING
|
|
IEC 60400:2017
|
Lampholders for tubular fluorescent lamps and starterholders
|
|
IEC 60947-7-1:2009
|
Low-voltage switchgear and controlgear - Part 7-1: Ancillary equipment - Terminal blocks for copper conductors
|
|
IEC TS 60034-18-41:2006
|
Rotating electrical machines - Part 18-41: Qualification and type tests for Type I electrical insulation systems used in rotating electrical machines fed from voltage converters
|
|
IEC 60050-426:2008
|
International Electrotechnical Vocabulary (IEV) - Part 426: Equipment for explosive atmospheres
|
|
EN 60112 : 2003 AMD 1 2009
|
METHOD FOR THE DETERMINATION OF THE PROOF AND THE COMPARATIVE TRACKING INDICES OF SOLID INSULATING MATERIALS
|
|
IEC 61347-2-1:2000+AMD1:2005+AMD2:2013 CSV
|
Lamp controlgear - Part 2-1: Particular requirements for startingdevices (other than glow starters)
|
|
EN 60998-2-4:2005
|
Connecting devices for low voltage circuits for household and similar purposes - Part 2-4: Particular requirements for twist-on connecting devices
|
|
IEC 61347-2-4:2000
|
Lamp controlgear - Part 2-4: Particular requirements for d.c. supplied electronic ballasts for general lighting
|
|
IEC 60999-1:1999
|
Connecting devices - Electrical copper conductors - Safety requirements for screw-type and screwless-type clamping units - Part 1: General requirements and particular requirements for clamping units for conductors from 0,2 mm2 up to 35 mm2 (included)
|
|
EN 61347-2-3:2011/A1:2017
|
LAMP CONTROL GEAR - PART 2-3: PARTICULAR REQUIREMENTS FOR A.C. AND/OR D.C. SUPPLIED ELECTRONIC CONTROL GEAR FOR FLUORESCENT LAMPS (IEC 61347-2-3:2011/A1:2016)
|
|
EN 60927:2007/A1:2013
|
AUXILIARIES FOR LAMPS - STARTING DEVICES (OTHER THAN GLOW STARTERS) - PERFORMANCE REQUIREMENTS (IEC 60927:2007/A1:2013 (34C/951/CDV))
|
|
IEC 60085:2007
|
Electrical insulation - Thermal evaluation and designation
|
|
EN 60079-11:2012
|
Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i"
|
|
IEC 60079-11:2011
|
Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i"
|
|
EN 60068-2-27:2009
|
Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock
|
|
EN 61347-2-7:2012
|
Lamp controlgear - Part 2-7: Particular requirements for battery supplied electronic controlgear for emergency lighting (self-contained)
|
|
IEC TS 60034-25:2014
|
Rotating electrical machines - Part 25: AC electrical machines used in power drive systems - Application guide
|
|
EN 61347-1:2015
|
Lamp controlgear - Part 1: General and safety requirements
|
|
IEC 61347-2-7:2011+AMD1:2017 CSV
|
Lamp controlgear - Part 2-7: Particular requirements for battery supplied electronic controlgear for emergency lighting (self-contained)
|
|
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV
|
Degrees of protection provided by enclosures (IP Code)
|
|
IEC 60269-3:2010+AMD1:2013 CSV
|
Low-voltage fuses - Part 3: Supplementary requirements for fuses foruse by unskilled persons (fuses mainly for household or similar applications) - Examples of standardized systems of fuses A to F
|
|
IEC TS 60034-17:2006
|
Rotating electrical machines - Part 17: Cage induction motors when fed from converters - Application guide
|
|
IEC 60079-29-2:2015 RLV
|
Explosive atmospheres - Part 29-2: Gas detectors - Selection, installation, use and maintenance of detectors for flammable gases and oxygen
|
|
IEC 60598-1:2014+AMD1:2017 CSV
|
Luminaires - Part 1: General requirements and tests
|
|
EN 60664-1:2007
|
Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests
|
|
IEC 60079-0:2011
|
Explosive atmospheres - Part 0: Equipment - General requirements
|
|
IEC 60061-1:2005 CSV
|
Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps
|
|
CLC/TS 60034-25:2008
|
Rotating electrical machines - Part 25: Guidance for the design and performance of a.c. motors specifically designed for converter supply
|
|
IEC 60034-1:2017
|
Rotating electrical machines - Part 1: Rating and performance
|
|
IEC 61347-2-2:2011
|
Lamp controlgear - Part 2-2: Particular requirements for d.c. or a.c. supplied electronic step-down convertors for filament lamps
|
|
IEC 60927:2007+AMD1:2013 CSV
|
Auxiliaries for lamps - Starting devices (other than glow starters)- Performance requirements
|
|
EN 60155:1995/A2:2007
|
GLOW-STARTERS FOR FLUORESCENT LAMPS
|
|
EN 61184:2017
|
Bayonet lampholders
|
|
EN 60999-1:2000
|
Connecting devices - Electrical copper conductors - Safety requirements for screw-type and screwless-type clamping units - Part 1: General requirements and particular requirements for clamping units for conductors from 0,2 mm² up to 35 mm² (included)
|
|
EN 60529:1991/AC:2016-12
|
DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015)
|
|
IEC 60155:1993
|
Glow-starters for fluorescent lamps
|
|
EN 60947-7-1:2009
|
LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 7-1: ANCILLARY EQUIPMENT - TERMINAL BLOCKS FOR COPPER CONDUCTORS
|
|
IEC 60664-1:2007
|
Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests
|
|
HD 60269-3:2010/A1:2013
|
LOW-VOLTAGE FUSES - PART 3: SUPPLEMENTARY REQUIREMENTS FOR FUSES FOR USE BY UNSKILLED PERSONS (FUSES MAINLY FOR HOUSEHOLD AND SIMILAR APPLICATIONS) - EXAMPLES OF STANDARDIZED SYSTEMS OF FUSES A TO F
|
|
IEC 61347-2-8:2000+AMD1:2006 CSV
|
Lamp controlgear - Part 2-8: Particular requirements for ballasts for fluorescent lamps
|
|
IEC 61184:2017
|
Bayonet lampholders
|
|
EN 61195:1999/A2:2015
|
DOUBLE-CAPPED FLUORESCENT LAMPS - SAFETY SPECIFICATIONS (IEC 61195:1999/A2:2014)
|
|
EN 61347-2-2:2012
|
Lamp controlgear - Part 2-2: Particular requirements for d.c. or a.c. supplied electronic step-down convertors for filament lamps
|
|
IEC 61195:1999+AMD1:2012+AMD2:2014 CSV
|
Double-capped fluorescent lamps - Safety specifications
|
|
EN 60947-7-2:2009
|
Low-voltage switchgear and controlgear - Part 7-2: Ancillary equipment - Protective conductor terminal blocks for copper conductors
|
Important note : All end users must be registered with an Account prior to user licenses being assigned.