UNE EN ISO 15494 : 2016

Add To Cart

Product Format

Table of Contents - (Show below) - (Hide below)

Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and abbreviated terms
5 Material
6 General characteristic
7 Geometrical characteristics
8 Mechanical characteristics
9 Physical characteristics
10 Chemical characteristics
11 Electrical characteristics
12 Performance requirements
13 Classification of components
14 Design of a thermoplastics piping system for
   industrial applications
15 Installation of piping systems
16 Declaration of compliance
17 Marking
Annex A (normative) Specific characteristics and
        requirements for industrial piping systems made
        from polybutene (PB)
Annex B (normative) Specific characteristics and
        requirements for industrial piping systems made
        from polyethylene (PE)
Annex C (normative) Specific characteristics and
        requirements for industrial piping systems made
        from polypropylene (PP)
Bibliography

Abstract - (Show below) - (Hide below)

Defines the characteristics and requirements for components such as pipes, fittings and valves made from one of the following materials: 1. Polybutene (PB); 2. Polyethylene (PE); 3. Polypropylene (PP)

General Product Information - (Show below) - (Hide below)

Published
Document Type	Standard
Status	Cancelled
Publisher	Asociacion Espanola de Normalizacion
Pages
ISBN
Committee	CTN 53
Superseded By	UNE-EN ISO 15494:2019

International Equivalents – Equivalent Standard(s) & Relationship - (Show below) - (Hide below)

Equivalent Standard(s)	Relationship
BS EN ISO 15494 : 2015	Identical
UNI EN ISO 15494 : 2005	Identical
ONORM EN ISO 15494 : 2016	Identical
I.S. EN ISO 15494:2015	Identical
EN ISO 15494:2018	Identical
NS EN ISO 15494 : 2003	Identical
EN ISO 15494 : 2015	Identical
ISO 15494 : 2015	Identical
NEN EN ISO 15494 : 2015	Identical
SN EN ISO 15494 : 2016	Identical
NF EN ISO 15494 : 2015	Identical
DIN EN ISO 15494 : 2016	Identical
DIN EN ISO 15494 E : 2016	Identical
NBN EN ISO 15494 : 2015	Identical
EN ISO 15494:2018	Identical
NBN EN ISO 15494 : 2015	Identical
ISO 15494 : 2015	Identical
EN ISO 15494 : 2015	Identical
NS EN ISO 15494 : 2003	Identical
DIN EN ISO 15494 E : 2016	Identical
I.S. EN ISO 15494:2015	Identical
NEN EN ISO 15494 : 2015	Identical
NF EN ISO 15494 : 2015	Identical
DIN EN ISO 15494 : 2016	Identical
UNI EN ISO 15494 : 2005	Identical
ONORM EN ISO 15494 : 2016	Identical
BS EN ISO 15494 : 2015	Identical
SN EN ISO 15494 : 2016	Identical

Standards Referencing This Book - (Show below) - (Hide below)

ISO 16135 : 2006(R2015)	INDUSTRIAL VALVES - BALL VALVES OF THERMOPLASTICS MATERIALS
ISO TR 10358 : 1993(R2009)	PLASTICS PIPES AND FITTINGS - COMBINED CHEMICAL RESISTANCE CLASSIFICATION TABLE
ISO 3213 : 2009(R2015)	POLYPROPYLENE (PP) PIPES - EFFECT OF TIME AND TEMPERATURE ON THE EXPECTED STRENGTH
ISO 1167-2 : 2006(R2014)	THERMOPLASTICS PIPES, FITTINGS AND ASSEMBLIES FOR THE CONVEYANCE OF FLUIDS - DETERMINATION OF THE RESISTANCE TO INTERNAL PRESSURE - PART 2: PREPARATION OF PIPE TEST PIECES
ISO 265-1 : 1988(R2015)	PIPES AND FITTINGS OF PLASTIC MATERIALS - FITTINGS FOR DOMESTIC AND INDUSTRIAL WASTE PIPES - BASIC DIMENSIONS: METRIC SERIES - PART 1: UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U)
ISO 1133-1 : 2011(R2016)	PLASTICS - DETERMINATION OF THE MELT MASS-FLOW RATE (MFR) AND MELT VOLUME-FLOW RATE (MVR) OF THERMOPLASTICS - PART 1: STANDARD METHOD
ISO 10146 : 1997(R2014)
ISO 4427-1 : 2007(R2010)	PLASTICS PIPING SYSTEMS - POLYETHYLENE (PE) PIPES AND FITTINGS FOR WATER SUPPLY - PART 1: GENERAL
ISO 6964 : 1986(R2006)	POLYOLEFIN PIPES AND FITTINGS - DETERMINATION OF CARBON BLACK CONTENT BY CALCINATION AND PYROLYSIS - TEST METHOD AND BASIC SPECIFICATION
ISO 14531-1 : 2002(R2019)	PLASTICS PIPES AND FITTINGS - CROSSLINKED POLYETHYLENE (PE-X) PIPE SYSTEMS FOR THE CONVEYANCE OF GASEOUS FUELS - METRIC SERIES - SPECIFICATIONS - PART 1: PIPES
ISO 1167-4 : 2007(R2016)	THERMOPLASTICS PIPES, FITTINGS AND ASSEMBLIES FOR THE CONVEYANCE OF FLUIDS - DETERMINATION OF THE RESISTANCE TO INTERNAL PRESSURE - PART 4: PREPARATION OF ASSEMBLIES
ISO 9080 : 2012(R2018)	PLASTICS PIPING AND DUCTING SYSTEMS - DETERMINATION OF THE LONG-TERM HYDROSTATIC STRENGTH OF THERMOPLASTICS MATERIALS IN PIPE FORM BY EXTRAPOLATION
ISO 13477 : 2008(R2018)	THERMOPLASTICS PIPES FOR THE CONVEYANCE OF FLUIDS - DETERMINATION OF RESISTANCE TO RAPID CRACK PROPAGATION (RCP) - SMALL-SCALE STEADY-STATE TEST (S4 TEST)
ISO 3 : 1973(R2008)	PREFERRED NUMBERS - SERIES OF PREFERRED NUMBERS
ISO 4433-1 : 1997(R2013)	THERMOPLASTICS PIPES - RESISTANCE TO LIQUID CHEMICALS - CLASSIFICATION - IMMERSION TEST METHOD
ISO 4437-2 : 2014	PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - POLYETHYLENE (PE) - PART 2: PIPES
ISO 18553 : 2002(R2014)	METHOD FOR THE ASSESSMENT OF THE DEGREE OF PIGMENT OR CARBON BLACK DISPERSION IN POLYOLEFIN PIPES, FITTINGS AND COMPOUNDS
ISO 12230 : 2012(R2017)	POLYBUTENE-1 (PB-1) PIPES - EFFECT OF TIME AND TEMPERATURE ON THE EXPECTED STRENGTH
CEN/TR 15438 : 2007	PLASTICS PIPING SYSTEMS - GUIDANCE FOR CODING OF PRODUCTS AND THEIR INTENDED USES
ISO 12162 : 2009(R2015)	THERMOPLASTICS MATERIALS FOR PIPES AND FITTINGS FOR PRESSURE APPLICATIONS - CLASSIFICATION, DESIGNATION AND DESIGN COEFFICIENT
ISO 15853 : 1999(R2016)	THERMOPLASTICS MATERIALS - PREPARATION OF TUBULAR TEST PIECES FOR THE DETERMINATION OF THE HYDROSTATIC STRENGTH OF MATERIALS USED FOR INJECTION MOULDING
ISO 13478 : 2007(R2016)	THERMOPLASTICS PIPES FOR THE CONVEYANCE OF FLUIDS - DETERMINATION OF RESISTANCE TO RAPID CRACK PROPAGATION (RCP) - FULL-SCALE TEST (FST)
ISO 3126 : 2005(R2015)	PLASTICS PIPING SYSTEMS - PLASTICS COMPONENTS - DETERMINATION OF DIMENSIONS
ISO 11922-1 : 1997	THERMOPLASTICS PIPES FOR THE CONVEYANCE OF FLUIDS - DIMENSIONS AND TOLERANCES - PART 1: METRIC SERIES
ISO 7-1 : 1994(R2015)	PIPE THREADS WHERE PRESSURE-TIGHT JOINTS ARE MADE ON THE THREADS - DIMENSIONS, TOLERANCES AND DESIGNATION
HD 60364-1 : 2008 AMD 11 2017	LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 1: FUNDAMENTAL PRINCIPLES, ASSESSMENT OF GENERAL CHARACTERISTICS, DEFINITIONS
ISO 16871 : 2003(R2014)	PLASTICS PIPING AND DUCTING SYSTEMS - PLASTICS PIPES AND FITTINGS - METHOD FOR EXPOSURE TO DIRECT (NATURAL) WEATHERING
ISO 472 : 2013	PLASTICS - VOCABULARY
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV	DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE)
ISO 4433-2 : 1997(R2013)	THERMOPLASTICS PIPES - RESISTANCE TO LIQUID CHEMICALS - CLASSIFICATION - POLYOLEFIN PIPES
ISO 1167-3 : 2007(R2016)	THERMOPLASTICS PIPES, FITTINGS AND ASSEMBLIES FOR THE CONVEYANCE OF FLUIDS - DETERMINATION OF THE RESISTANCE TO INTERNAL PRESSURE - PART 3: PREPARATION OF COMPONENTS
ISO 24033 : 2009(R2014)	POLYETHYLENE OF RAISED TEMPERATURE RESISTANCE (PE-RT) PIPES - EFFECT OF TIME AND TEMPERATURE ON THE EXPECTED STRENGTH
ISO 17885 : 2015	PLASTICS PIPING SYSTEMS - MECHANICAL FITTINGS FOR PRESSURE PIPING SYSTEMS - SPECIFICATIONS
ISO 1183-1 : 2012	PLASTICS - METHODS FOR DETERMINING THE DENSITY OF NON-CELLULAR PLASTICS - PART 1: IMMERSION METHOD, LIQUID PYKNOMETER METHOD AND TITRATION METHOD
ISO 16138 : 2006(R2015)	INDUSTRIAL VALVES - DIAPHRAGM VALVES OF THERMOPLASTICS MATERIALS
ISO 1183-2 : 2004(R2012)	PLASTICS - METHODS FOR DETERMINING THE DENSITY OF NON-CELLULAR PLASTICS - PART 2: DENSITY GRADIENT COLUMN METHOD
ISO 16137 : 2006	INDUSTRIAL VALVES - CHECK VALVES OF THERMOPLASTICS MATERIALS
ISO 15512 : 2016	PLASTICS - DETERMINATION OF WATER CONTENT
ISO 11357-6 : 2008	PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 6: DETERMINATION OF OXIDATION INDUCTION TIME (ISOTHERMAL OIT) AND OXIDATION INDUCTION TEMPERATURE (DYNAMIC OIT)
ISO 4065 : 1996	THERMOPLASTICS PIPES - UNIVERSAL WALL THICKNESS TABLE
ISO 16136 : 2006(R2015)	INDUSTRIAL VALVES - BUTTERFLY VALVES OF THERMOPLASTICS MATERIALS
ISO 497 : 1973(R2008)	GUIDE TO THE CHOICE OF SERIES OF PREFERRED NUMBERS AND OF SERIES CONTAINING MORE ROUNDED VALUES OF PREFERRED NUMBERS
ISO 16139 : 2006(R2015)	INDUSTRIAL VALVES - GATE VALVES OF THERMOPLASTICS MATERIALS
ISO 13760 : 1998(R2014)	PLASTICS PIPES FOR THE CONVEYANCE OF FLUIDS UNDER PRESSURE - MINER'S RULE - CALCULATION METHOD FOR CUMULATIVE DAMAGE
ISO 10147 : 2011(R2017)	PIPES AND FITTINGS MADE OF CROSSLINKED POLYETHYLENE (PE-X) - ESTIMATION OF THE DEGREE OF CROSSLINKING BY DETERMINATION OF THE GEL CONTENT
ISO 760 : 1978(R2016)	DETERMINATION OF WATER - KARL FISCHER METHOD (GENERAL METHOD)
ISO 21787 : 2006(R2015)	INDUSTRIAL VALVES - GLOBE VALVES OF THERMOPLASTICS MATERIALS
ISO 1043-1 : 2011(R2016)	PLASTICS - SYMBOLS AND ABBREVIATED TERMS - PART 1: BASIC POLYMERS AND THEIR SPECIAL CHARACTERISTICS
EN 12099 : 1997	PLASTICS PIPING SYSTEMS - POLYETHYLENE PIPING MATERIALS AND COMPONENTS - DETERMINATION OF VOLATILE CONTENT
ISO 228-1 : 2000(R2016)	PIPE THREADS WHERE PRESSURE-TIGHT JOINTS ARE NOT MADE ON THE THREADS - PART 1: DIMENSIONS, TOLERANCES AND DESIGNATION
EN 712 : 1993	THERMOPLASTICS PIPING SYSTEMS - END-LOAD BEARING MECHANICAL JOINTS BETWEEN PRESSURE PIPES AND FITTINGS - TEST METHOD FOR RESISTANCE TO PULL-OUT UNDER CONSTANT LONGITUDINAL FORCE
1997/23/EC : 1997	DIRECTIVE 97/23/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 29 MAY 1997 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES CONCERNING PRESSURE EQUIPMENT
ISO 1167-1 : 2006(R2015)	THERMOPLASTICS PIPES, FITTINGS AND ASSEMBLIES FOR THE CONVEYANCE OF FLUIDS - DETERMINATION OF THE RESISTANCE TO INTERNAL PRESSURE - PART 1: GENERAL METHOD
ISO 2505 : 2005(R2015)	THERMOPLASTICS PIPES - LONGITUDINAL REVERSION - TEST METHOD AND PARAMETERS

Publisher