• There are no items in your cart

UNI EN 1020 : 2009

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

NON-DOMESTIC FORCED CONVECTION GAS- FIRED AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 300 KW INCORPORATING A FAN TO ASSIST TRANSPORTATION OF COMBUSTION AIR OR COMBUSTION PRODUCTS
Superseded date

05-12-2022

Published date

01-01-2009

Foreword
1 Scope
2 Normative references
3 Terms and definitions
  3.1 Appliance and its constituent parts
4 Classification of systems
  4.1 Classification according to the nature of the gases
       used (Categories)
  4.2 Classification of appliances according to the gases
       capable of being used
  4.3 Classification of appliances according to the mode
       of evacuation of the combustion products
5 Constructional requirements
  5.1 General
  5.2 Adjusting, control and safety devices
  5.3 Ignition devices
  5.4 Transportation of combustion air and/or flue gases
  5.5 Flame supervision system
  5.6 Start-gas flame establishment
  5.7 Main flame establishment
  5.8 Main burner
  5.9 Facility for remote control
  5.10 Thermostats and air temperature control
  5.11 Gas pressure test points
  5.12 Combustion chamber pressure relief
  5.13 Facilities for commissioning and testing
  5.14 Additional requirements for appliances designed for
       outdoor installation
6 Operational requirements
  6.1 Safety of operation
  6.2 Efficiency
7 Test methods
  7.1 General
  7.2 Construction and design
  7.3 Safety of operation
  7.4 Efficiency
8 Marking and instructions
  8.1 Marking of the appliance
  8.2 Marking of the packaging
  8.3 Utilization of symbols on the appliance and packaging
  8.4 Instructions
9 Evaluation of conformity of POCED's and their associated
  terminals
  9.1 General
  9.2 Type testing
  9.3 Factory production control (FPC)
Annex A (informative) - National situations
Annex B (informative) - Equivalence rules
Annex C (normative) - Classification according to the
  evacuation of the combustion
Annex D (normative) - Requirements and test methods
  for separate air supply and combustion products
  evacuation ducts
Annex E (informative) - Facilities for commissioning and
  testing
Annex F (informative) - Identification of gas types in use
  in various countries
Annex G (informative) - Requirements in EN 1020 which
  relate to the design and construction of forced draught
  burners covered in EN 676:1996
Annex H (informative) - A-deviations
Annex I (normative) - Special national conditions
Annex J (informative) - National solutions for countries
  whose national bodies are Affiliate
  Members of CEN
Annex K (informative) - Calculation of conversions of NOx
Annex L (informative) - Sampling plan example
Annex ZA (informative) - Relationship between this European
  Standard and the Essential Requirements of EU Directives
Annex ZB (informative) - Clauses of this European Standard
  addressing the provisions of the EU Construction Products
  Directive
Bibliography

Describes the requirements and test methods for the safety and efficiency of non-domestic gas-fired air heaters having a fan to assist the transportation of combustion air and/or flue gases. Also covers appliances having forced draught burners.

DevelopmentNote
Together with UNI EN 525, UNI EN 621, UNI EN 778 and UNI EN 1319, it supersedes UNI 8124 and UNI 8125. (08/2001)
DocumentType
Standard
PublisherName
Ente Nazionale Italiano di Unificazione (UNI)
Status
Superseded
SupersededBy
Supersedes

Standards Relationship
NEN EN 1020 : 2009 Identical
DIN EN 1020:2010-05 Identical
NBN EN 1020 : 2010 Identical
UNE-EN 1020:2010 Identical
NS EN 1020 : 2009 Identical
SN EN 1020 : 2010 Identical
NF EN 1020 : 2010 Identical
I.S. EN 1020:2009 Identical
BS EN 1020:2009 Identical
EN 1020:2009 Identical

EN 1859:2009+A1:2013 Chimneys - Metal chimneys - Test methods
EN 676:2003+A2:2008/AC:2008 AUTOMATIC FORCED DRAUGHT BURNERS FOR GASEOUS FUELS
IEC 60335-2-102:2004+AMD1:2008+AMD2:2012 CSV Household and similar electrical appliances - Safety - Part 2-102:Particular requirements for gas, oil and solid-fuel burning appliances having electrical connections
IEC 60730-2-9:2015 RLV Automatic electrical controls - Part 2-9: Particular requirements for temperature sensing controls
ISO 7005-2:1988 Metallic flanges — Part 2: Cast iron flanges
ISO 6976:2016 Natural gas — Calculation of calorific values, density, relative density and Wobbe indices from composition
EN 10226-2:2005 Pipe threads where pressure tight joints are made on the threads - Part 2: Taper external threads and taper internal threads - Dimensions, tolerances and designation
EN 60584-2:1993 Thermocouples - Part 2: Tolerances
EN 60730-2-9:2010 Automatic electrical controls for household and similar use - Part 2-9: Particular requirements for temperature sensing controls
EN 12067-1 : 98 AMD 1 2003 GAS/AIR RATIO CONTROLS FOR GAS BURNERS AND GAS BURNING APPLIANCES - PART 1: PNEUMATIC TYPES
ISO 7005-3:1988 Metallic flanges Part 3: Copper alloy and composite flanges
EN ISO 3166-1:2014 Codes for the representation of names of countries and their subdivisions - Part 1: Country codes (ISO 3166-1:2013)
IEC 61558-2-6:2009 Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2-6: Particular requirements and tests for safety isolating transformers and power supply units incorporating safety isolating transformers
EN 161:2011+A3:2013 Automatic shut-off valves for gas burners and gas appliances
ISO 1182:2010 Reaction to fire tests for products Non-combustibility test
EN ISO 228-1:2003 Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000)
ISO 7-1:1994 Pipe threads where pressure-tight joints are made on the threads Part 1: Dimensions, tolerances and designation
EN 437:2003+A1:2009 Test gases - Test pressures - Appliance categories
EN 125:2010+A1:2015 Flame supervision devices for gas burning appliances - Thermoelectric flame supervision devices
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV Degrees of protection provided by enclosures (IP Code)
EN 126:2012 Multifunctional controls for gas burning appliances
IEC 61058-1:2016 Switches for appliances - Part 1: General requirements
EN 60584-1:2013 Thermocouples - Part 1: EMF specifications and tolerances
CR 1404:1994 Determination of emissions from appliances burning gaseous fuels during type-testing
IEC 60730-2-1:1989 Automatic electrical controls for household and similar use. Part 2: Particular requirements for electrical controls for electrical household appliances
EN 60335-2-102:2016 Household and similar electrical appliances - Safety - Part 2-102: Particular requirements for gas, oil and solid-fuel burning appliances having electrical connections
EN 60730-2-1 : 97 AMD 11 2005 AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 2-1: PARTICULAR REQUIREMENTS FOR ELECTRICAL CONTROLS FOR ELECTRICAL HOUSEHOLD APPLIANCES
ISO 3166-1:2013 Codes for the representation of names of countries and their subdivisions Part 1: Country codes
EN 61058-1:2002/A2:2008 SWITCHES FOR APPLIANCES - PART 1: GENERAL REQUIREMENTS
EN 61558-2-6:2009 Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2-6: Particular requirements and tests for safety isolating transformers and power supply units incorporating safety isolating transformers
EN 60335-1:2012/A13:2017 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60335-1:2010, MODIFIED)
EN 298:2012 Automatic burner control systems for burners and appliances burning gaseous or liquid fuels
ISO 7005-1:2011 Pipe flanges — Part 1: Steel flanges for industrial and general service piping systems
EN 60529:1991/AC:2016-12 DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015)
EN ISO 6976:2016 Natural gas - Calculation of calorific values, density, relative density and Wobbe indices from composition (ISO 6976:2016)
EN 10226-1:2004 Pipe threads where pressure tight joints are made on the threads - Part 1: Taper external threads and parallel internal threads - Dimensions, tolerances and designation
IEC 60584-1:2013 Thermocouples - Part 1: EMF specifications and tolerances
EN 88-1:2011+A1:2016 Pressure regulators and associated safety devices for gas appliances - Part 1: Pressure regulators for inlet pressures up to and including 50 kPa
ISO 228-1:2000 Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designation
EN 60730-1:2016 Automatic electrical controls - Part 1: General requirements
IEC 60730-1:2013+AMD1:2015 CSV Automatic electrical controls - Part 1: General requirements
EN 257:2010 Mechanical thermostats for gas-burning appliances

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.