• There are no items in your cart

UNI EN 10208-2 : 2009

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 2: PIPES OF REQUIREMENT CLASS B
Superseded date

12-11-2012

Published date

01-01-2009

Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and abbreviations
5 Classification and designation
   5.1 Classification
   5.2 Designation
6 Information to be supplied by the purchaser
   6.1 Mandatory information
   6.2 Options
   6.3 Example of ordering
7 Manufacturing
   7.1 General
   7.2 Steelmaking
   7.3 Pipe manufacture
   7.4 Heat treatment condition
   7.5 Sizing
   7.6 Strip end welds
   7.7 Jointers
   7.8 General requirements for non-destructive testing
8 Requirements
   8.1 General
   8.2 Chemical composition
   8.3 Mechanical properties
   8.4 Weldability
   8.5 Appearance and soundness
   8.6 Dimensions, masses and tolerances
9 Inspection
   9.1 Types of inspection and inspection documents
   9.2 Summary of inspection and testing
   9.3 Selection and preparation of samples and test pieces
   9.4 Test methods
   9.5 Retests, sorting and reprocessing
10 Marking of the pipes
   10.1 General marking
   10.2 Special marking
11 Coating for temporary protection
Annex A (normative) Manufacturing procedure qualification
Annex B (normative) Treatment of imperfections and defects
        disclosed by visual examination
Annex C (normative) Non-destructive testing
Bibliography

Describes the technical delivery conditions for seamless and welded steel pipes for the on land transport of combustible fluids primarily in gas supply systems but excluding pipeline applications in the petroleum and natural gas industries. Also includes more stringent quality and testing requirements than those in EN 10208-1.

DevelopmentNote
Supersedes UNI 8488. (06/2004)
DocumentType
Standard
PublisherName
Ente Nazionale Italiano di Unificazione (UNI)
Status
Superseded
SupersededBy
Supersedes

Standards Relationship
NEN EN 10208-2 : 2009 Identical
SN EN 10208-2 : 2009 Identical
BS EN 10208-2:2009 Identical
UNE-EN 10208-2:2011 Identical
NBN EN 10208-2 : 2009 Identical
NF EN 10208-2 : 2009 Identical
NS EN 10208-2 : 2009 Identical
EN 10208-2:2009 Identical
I.S. EN 10208-2:2009 Identical
DIN EN 10208-2:2009-07 Identical

UNI 9167 : 2009 INITIAL PRESSURE AND REDUCTION PLANTS FOR NATURAL GAS - DESIGN, CONSTRUCTION AND TESTING
UNI 7133-4 : 2012 GAS ODORISATION FOR DOMESTIC AND SIMILAR USES - PART 4: ODORANT REQUIREMENTS
UNI 10682 : 2010 SMALL BULK LPG FACILITIES FOR DISTRIBUTION NETWORK - DESIGN, CONSTRUCTION, INSTALLATION, TESTING AND OPERATION

EN ISO 14284:2002 Steel and iron - Sampling and preparation of samples for the determination of chemical composition (ISO 14284:1996)
EN 10002-1 : 2001 METALLIC MATERIALS - TENSILE TESTING - PART 1: METHOD OF TEST AT AMBIENT TEMPERATURE
EN 10052:1993 Vocabulary of heat treatment terms for ferrous products
EN 10246-17:2000 Non-destructive testing of steel tubes - Part 17: Ultrasonic testing of tube ends of seamless and welded steel tubes for the detection of laminar imperfections
EN ISO 6508-1:2016 Metallic materials - Rockwell hardness test - Part 1: Test method (ISO 6508-1:2016)
EN ISO 6506-1:2014 Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:2014)
ISO 6506-1:2014 Metallic materials Brinell hardness test Part 1: Test method
EN 10079:2007 Definition of steel products
EN 10027-2:2015 DESIGNATION SYSTEMS FOR STEELS - PART 2: NUMERICAL SYSTEM
CEN/TR 10261:2013 Iron and steel - European standards for the determination of chemical composition
EN ISO 377:2017 Steel and steel products - Location and preparation of samples and test pieces for mechanical testing (ISO 377:2017)
ISO 6508-1:2016 Metallic materials — Rockwell hardness test — Part 1: Test method
EN 1594:2013 Gas infrastructure - Pipelines for maximum operating pressure over 16 bar - Functional requirements
EN 10256:2000 Non-destructive testing of steel tubes - Qualification and competence of level 1 and 2 non-destructive testing personnel
EN 1011-1:2009 Welding - Recommendations for welding of metallic materials - Part 1: General guidance for arc welding
ISO 3183:2012 Petroleum and natural gas industries Steel pipe for pipeline transportation systems
EN 10168:2004 Steel products - Inspection documents - List of information and description
EN ISO 2566-1:1999 Steel - Conversion of elongation values - Part 1: Carbon and low alloy steels (ISO 2566-1:1984)
EN 473:2008 Non-destructive testing - Qualification and certification of NDT personnel - General principles
API 5L : 2012 LINE PIPE
EN 10274:1999 Metallic materials - Drop weight tear test
EN 910 : 1996 DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS - BEND TESTS
EN 1011-2:2001/A1:2003 WELDING - RECOMMENDATIONS FOR WELDING OF METALLIC MATERIALS - PART 2: ARC WELDING OF FERRITIC STEELS
EN 10045-1 : 1990 METALLIC MATERIALS - CHARPY IMPACT TEST - PART 1: TEST METHOD
EN 10246-7:2005 Non-destructive testing of steel tubes - Part 7: Automatic full peripheral ultrasonic testing of seamless and welded (except submerged arc welded) tubes for the detection of longitudinal imperfections
EN 10246-16:2000 Non-destructive testing of steel tubes - Part 16: Automatic ultrasonic testing of the area adjacent to the weld seam of welded steel tubes for the detection of laminar imperfections
EN 10021:2006 General technical delivery conditions for steel products
EN 10246-10:2000 Non-destructive testing of steel tubes - Part 10: Radiographic testing of the weld seam of automatic fusion arc welded steel tubes for the detection of imperfections
ISO 2566-1:1984 Steel Conversion of elongation values Part 1: Carbon and low alloy steels
EN 10204:2004 Metallic products - Types of inspection documents
EN 10246-9:2000 Non-destructive testing of steel tubes - Part 9: Automatic ultrasonic testing of the weld seam of submerged arc welded steel tubes for the detection of longitudinal and/or transverse imperfections
EN 10246-3:1999 Non-destructive testing of steel tubes - Part 3: Automatic eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections
ISO 19232-1:2013 Non-destructive testing — Image quality of radiographs — Part 1: Determination of the image quality value using wire-type image quality indicators
EN 10027-1:2016 Designation systems for steels - Part 1: Steel names
ISO 8492:2013 Metallic materials Tube Flattening test
EN 10020:2000 Definition and classification of grades of steel
EN ISO 8492:2013 Metallic materials - Tube - Flattening test (ISO 8492:2013)
EN 10246-15:2000 Non-destructive testing of steel tubes - Part 15: Automatic ultrasonic testing of strip/plate used in the manufacture of welded steel tubes for the detection of laminar imperfections
EN 10246-14:1999 Non-destructive testing of steel tubes - Part 14: Automatic ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of laminar imperfections
EN 10266:2003 Steel tubes, fittings and structural hollow sections - Symbols and definitions of terms for use in product standards
EN 10220:2002 Seamless and welded steel tubes - Dimensions and masses per unit length
ISO 377:2017 Steel and steel products — Location and preparation of samples and test pieces for mechanical testing
ISO 14284:1996 Steel and iron — Sampling and preparation of samples for the determination of chemical composition
EN 10246-8:1999 Non-destructive testing of steel tubes - Part 8: Automatic ultrasonic testing of the weld seam of electric welded steel tubes for the detection of longitudinal imperfections
EN 10246-5 : 1999 NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 5: AUTOMATIC FULL PERIPHERAL MAGNETIC TRANSDUCER/FLUX LEAKAGE TESTING OF SEAMLESS AND WELDED (EXCEPT SUBMERGED ARC WELDED) FERROMAGNETIC STEEL TUBES FOR THE DETECTION OF LONGITUDINAL IMPERFECTIONS

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.