BGR 149 : 1995
|
|
VDI 2397:2000-03
|
Selection of operational speeds for overhead travelling cranes
|
DIN EN 12644-2:2009-06
|
CRANES - INFORMATION FOR USE AND TESTING - PART 2: MARKING
|
BGV A 8 : 2002
|
|
EN 13557:2003+A2:2008
|
Cranes - Controls and control stations
|
ISO 14122-3:2016
|
Safety of machinery — Permanent means of access to machinery — Part 3: Stairs, stepladders and guard-rails
|
ISO 14122-1:2016
|
Safety of machinery — Permanent means of access to machinery — Part 1: Choice of fixed means and general requirements of access
|
DIN 15428:1978-08
|
LIFTING APPLIANCES; LOAD SUSPENDING DEVICES, TECHNICAL SPECIFICATIONS
|
EN 13155:2003+A2:2009
|
Cranes - Safety - Non-fixed load lifting attachments
|
VDI 3575:2000-10
|
Path limiters for cranes - Mechanical and electromechanical components
|
BGV D 8 : 1997
|
WINCHES, LIFTING APPLIANCES AND DRAWING MACHINES
|
EN 12644-2:2000+A1:2008
|
Cranes - Information for use and testing - Part 2: Marking
|
IEC 60364-4-41:2005+AMD1:2017 CSV
|
Low voltage electrical installations - Part 4-41: Protection for safety - Protection against electric shock
|
DIN EN 13001-1:2015-06
|
CRANES - GENERAL DESIGN - PART 1: GENERAL PRINCIPLES AND REQUIREMENTS
|
DIN EN 50110-1 : 2014-02
|
OPERATION OF ELECTRICAL INSTALLATIONS - PART 1: GENERAL REQUIREMENTS
|
VDI 3650:2013-02
|
Equipment for protecting cranes against drifting caused by wind
|
BGV D 6 : 2000
|
CRANES
|
VDE 0298-4 : 2013
|
Application of cables and cords in power installations – Part 4: Recommended current-carrying capacity for sheathed and nonsheathed cables for fixed wirings in and around buildings and for flexible cables and cords<br>
|
ISO 12488-1:2012
|
Cranes — Tolerances for wheels and travel and traversing tracks — Part 1: General
|
VDE 0105-1 : 2014-02
|
BETRIEB VON ELEKTRISCHEN ANLAGEN - TEIL 1: ALLGEMEINE ANFORDERUNGEN
|
DIN 15404-1:1989-12
|
LIFTING HOOKS, TECHNICAL CONDITIONS FOR FORGED HOOKS
|
ISO 1219-2:2012
|
Fluid power systems and components — Graphical symbols and circuit diagrams — Part 2: Circuit diagrams
|
DIN EN 13557:2009-07
|
CRANES - CONTROLS AND CONTROL STATIONS
|
VDI 3570:2013-08
|
Overload safeguards for cranes
|
IEC 60204-32:2008
|
Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines
|
EN 13586:2004+A1:2008
|
Cranes - Access
|
DIN VDE 0100 : 1973
|
ERECTION OF POWER INSTALLATIONS WITH RATED VOLTAGES BELOW 1000 V
|
DIN ISO 1219-2:1996-11
|
FLUID POWER SYSTEMS AND COMPONENTS - GRAPHIC SYMBOLS AND CIRCUIT DIAGRAMS - PART 2: CIRCUIT DIAGRAMS
|
ISO 14122-4:2016
|
Safety of machinery — Permanent means of access to machinery — Part 4: Fixed ladders
|
EN 60204-32:2008
|
Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines
|
EN 13001-2:2014
|
Crane safety - General design - Part 2: Load actions
|
DIN EN 13586:2009-05
|
Cranes - Access (includes Amendment A1:2008)
|
ISO 12488-4:2004
|
Cranes Tolerances for wheels and travel and traversing tracks Part 4: Jib cranes
|
VDE 0100-410 : 2007
|
LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 4-41: PROTECTION FOR SAFETY - PROTECTION AGAINST ELECTRIC SHOCK
|
VDI 1000:2017-02
|
VDI Standardisation Work - Principles and procedures
|
SEB 664035 : 1990
|
KRANE UND KRANBAHNEN EINSCHLIESSLICH GESCHWEISSTER KRANSCHIENEN- STOESSE - TOLERANZEN FUER DAS FAHRSYSTEM LAUFRAD-SCHIENE
|
ZH 1/547 : 1976
|
|
DIN EN 12644-1:2009-06
|
CRANES - INFORMATION FOR USE AND TESTING - PART 1: INSTRUCTIONS
|
EN ISO 14122-3:2016
|
Safety of machinery - Permanent means of access to machinery - Part 3: Stairs, stepladders and guard-rails (ISO 14122-3:2016)
|
DIN VDE 0298-4 : 1998
|
APPLICATION OF CABLES AND CORDS IN POWER INSTALLATIONS - PART 4: RECOMMENDED CURRENT-CARRYING CAPACITY FOR SHEATHED AND NONSHEATHED CABLES FOR FIXED WIRINGS IN AND AROUND BUILDINGS AND FOR FLEXIBLE CABLES AND CORDS
|
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV
|
Degrees of protection provided by enclosures (IP Code)
|
EN 13001-1:2015
|
Cranes - General design - Part 1: General principles and requirements
|
EN ISO 14122-4:2016
|
Safety of machinery - Permanent means of access to machinery - Part 4: Fixed ladders (ISO 14122-4:2016)
|
SEB 660035 : 1991
|
KRANE MIT DRAHTLOSER STEUERUNG - GRUNDLAGEN UND SICHERHEITSTECHNISCHE ANFORDERUNGEN
|
BGG 905 : 2012
|
|
EN ISO 14122-2:2016
|
Safety of machinery - Permanent means of access to machinery - Part 2: Working platforms and walkways (ISO 14122-2:2016)
|
VDE 0100-731 : 2014-10
|
Low voltage electrical installations – Part 7-731: Requirements for special installations or locations – Closed electrical operating areas
|
EN 14492-2:2006+A1:2009/AC:2010
|
CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS
|
DIN EN 60529 : 2014-09
|
DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529:1989 + A1:1999 + A2:2013)
|
DIN EN 12077-2:2008-12
|
CRANES SAFETY - REQUIREMENTS FOR HEALTH AND SAFETY - PART 2: LIMITING AND INDICATING DEVICES
|
DIN VDE 0100-731 : 2014-10
|
LOW VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-731: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - CLOSED ELECTRICAL OPERATING AREA
|
DIN EN 14492-2:2016-08 (Draft)
|
CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS
|
EN 60529:1991/AC:2016-12
|
DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015)
|
VDE 0113-32 : 2009-03
|
SAFETY OF MACHINERY ELECTRICAL EQUIPMENT OF MACHINES - PART 32: REQUIREMENTS FOR HOISTING MACHINES
|
ISO 14122-2:2016
|
Safety of machinery — Permanent means of access to machinery — Part 2: Working platforms and walkways
|
VDE 0100 : 1973
|
REGULATIONS FOR THE SETTING-UP OF POWER PLANTS WITH RATED VOLTAGES UP TO 1000 V
|
VDI 3576:2011-03
|
Rails for crane systems - Rail connections, rail beddings, rail fastenings, tolerances for crane tracks
|
BGR 500 : SEP 2008
|
|
EN ISO 14122-1:2016
|
Safety of machinery - Permanent means of access to machinery - Part 1: Choice of fixed means and general requirements of access (ISO 14122-1:2016)
|
DIN EN 13155:2009-08
|
Cranes - Safety - Non-fixed load lifting attachments (includes Amendment A2:2009)
|
DIN EN 13001-2:2014-12
|
Crane safety - General design - Part 2: Load actions
|
DIN EN 60204-32 : 2009-03
|
SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 32: REQUIREMENTS FOR HOISTING MACHINES
|
DIN 15404-2:1988-11
|
LIFTING HOOKS - TECHNICAL CONDITIONS FOR LAMINATED HOOKS
|
BGV A 1 : 2008
|
|