VDI 2700 Blatt 7:2014-07
Current
Current
The latest, up-to-date edition.
Securing of loads on road vehicles - Safety of loads in combined transport
Available format(s)
Hardcopy , PDF
Language(s)
German - English
Published date
07-01-2014
Publisher
Preliminary note
1 Scope
2 Normative references
3 Basic principles
4 Stresses arising in transport
5 Requirements applicable to large
load units
6 Securing of loads inside large
load units
7 Additional
Bibliography
Pertains to given relates to stresses arising during transportation, requirements applicable to large load units and securing cargo in large load units, as they are specified by VDI 2700, the CTU packing guidelines and the UIC.
| DevelopmentNote |
Supersedes VDI 2707. (08/2000)
|
| DocumentType |
Standard
|
| Pages |
12
|
| PublisherName |
Verlag des Vereins Deutscher Ingenieure
|
| Status |
Current
|
| Supersedes |
| VDI 2700 Blatt 16:2009-07 | Securing of loads on road vehicles - Securing of loads on transporter up to a total mass of 7,5 t |
| VDI 2700 Blatt 3.3:2013-05 | Securing of loads on road vehicles - Cargo nets for load securing |
| VDI 2700 Blatt 17:2009-04 | Securing of loads on road vehicles - Securing of skips on skip loader vehicles and their trailers |
| VDI 2700 Blatt 9:2006-04 | Securing loads on road vehicles - Securing of hard paperrolls |
| VDI 3968 Blatt 1:2013-04 | Securing of load units - Specification of requirements |
| VDI 2700 Blatt 5:2011-12 | Securing of loads on road vehicles - Quality management systems |
| VDI 2700 Blatt 14:2011-09 | Securing of loads on road vehicles - Determination of coefficients of friction |
| VDI 2700 Blatt 4:2012-03 | Securing of loads on road vehicles - Load distribution plan |
| VDI 2700 Blatt 19:2011-01 | Securing of loads on road vehicles - Rolled steel strip, sheets, and section steel |
| VDI 2700 Blatt 2:2014-07 | Securing of loads on road vehicles - Calculation of tie-down forces - Fundamentals |
| VDI 2700:2004-11 | Securing of loads on road vehicles |
| VDI 2700 Blatt 15:2009-05 | Securing of loads on road vehicles - Slip-inhibiting materials |
| VDI 2700 Blatt 8.1:2009-04 | Securing of loads on road vehicles - Securing of passenger cars and cargo minivans on vehicle transporters |
| VDI 2700 Blatt 12:2009-01 | Securing of loads on road vehicles - Securing of beverage products |
| VDI 2700 Blatt 8.2:2010-12 | Securing of loads on road vehicles - Securing of trucks on vehicle transporters |
| VDI 2700 Blatt 6:2006-10 | Securing of loads on road vehicles - Part-load consignment |
| VDI 2700 Blatt 3.2:2006-09 | Securing of loads on road vehicles - Vehicles equipments and securing aids for load |
| DIN ISO 27955:2012-01 | Road vehicles - Securing of cargo in passenger cars, station wagons and multi-purpose vehicles - Requirements and test methods (ISO 27955:2010) |
| EN 13044:2000 | Swap bodies - Coding, identification and marking |
| VDI 2700 Blatt 4:2012-03 | Securing of loads on road vehicles - Load distribution plan |
| UIC 596-6 : 6ED 2014 | CONDITIONS FOR CODING INTERMODAL TRANSPORT UNITS IN COMBINED TRANSPORT, COMBINED TRANSPORT LINES AND WAGONS |
| DIN EN 13044:2000-12 | SWAP BODIES - CODING, IDENTIFICATION AND MARKING |
| VDI 2700 Blatt 3.1:2006-10 | Securing of loads on road vehicles - Instruction manual for lashings |
| VDI 2700 Blatt 3.3:2013-05 | Securing of loads on road vehicles - Cargo nets for load securing |
| DIN EN 12195-1:2011-06 | LOAD RESTRAINING ON ROAD VEHICLES - SAFETY - PART 1: CALCULATION OF SECURING FORCES |
| UIC 592-3 : 2ED 1998 | LARGE CONTAINERS (CT), SWAP BODIES (CM) AND TRANSPORT FRAMES FOR HORIZONTAL TRANSHIPMENT (CA) - STANDARD REPORT ON ACCEPTANCE TESTS |
| VDI 2700 Blatt 13:2010-05 | Securing of loads on road vehicles - Oversized and heavy load transportation |
| ISO 1496-1:2013 | Series 1 freight containers — Specification and testing — Part 1: General cargo containers for general purposes |
| VDI 2700 Blatt 5:2011-12 | Securing of loads on road vehicles - Quality management systems |
| DIN EN 12642:2015-08 (Draft) | SECURING OF CARGO ON ROAD VEHICLES - BODY STRUCTURE OF COMMERCIAL VEHICLES - MINIMUM REQUIREMENTS |
| ISO 6346:1995 | Freight containers Coding, identification and marking |
| DIN EN ISO 6346:1996-01 | FREIGHT CONTAINERS - CODING, IDENTIFICATION AND MARKING |
| EN 12406:1999 | Swap bodies - Thermal swap bodies of Class C - Dimensions and general requirements |
| EN 12642:2016 | Securing of cargo on road vehicles - Body structure of commercial vehicles - Minimum requirements |
| EN 12195-1:2010/AC:2014 | LOAD RESTRAINING ON ROAD VEHICLES - SAFETY - PART 1: CALCULATION OF SECURING FORCES |
| VDI 2700 Blatt 12:2009-01 | Securing of loads on road vehicles - Securing of beverage products |
| VDI 2700 Blatt 1:2014-05 | Securing of loads on road vehicles - Training and contents of training |
| DIN 75410-1:2003-07 | Securing of cargo road vehicles - Part 1: Lashing points on commercial vehicles for goods transportation up to a total mass of 3,5 t; Minimum requirements |
| UIC 599 : 1986 AMD 2 | EQUIPMENT FOR LOADING AND UNLOADING CONTAINERS OR VEHICLES USED IN COMBINED TRANSPORT ON/FROM WAGONS |
| VDI 2700:2004-11 | Securing of loads on road vehicles |
| VDI 2700 Blatt 8.1:2009-04 | Securing of loads on road vehicles - Securing of passenger cars and cargo minivans on vehicle transporters |
| ISO 27955:2010 | Road vehicles Securing of cargo in passenger cars, station wagons and multi-purpose vehicles Requirements and test methods |
| UIC 592 : 2ED 2013 | INTERMODAL TRANSPORT UNITS (OTHER THAN SEMI-TRAILERS) FOR VERTICAL TRANSHIPMENT AND SUITABLE FOR CARRIAGE ON WAGONS - MINIMUM REQUIREMENTS |
| EN 284:2006 | Swap bodies - Non-stackable swap bodies of class C - Dimensions and general requirements |
| DIN EN 12406:1999-08 | SWAP BODIES - THERMAL SWAP BODIES OF CLASS C - DIMENSIONS AND GENERAL REQUIREMENTS |
| DIN ISO 27956:2011-11 | Road vehicles - Securing of cargo in delivery vans - Requirements and test methods (ISO 27956:2009) |
| EN 12195-3:2001 | Load restraint assemblies on road vehicles - Safety - Part 3: Lashing chains |
| EN 12641-1:2005 | Swap bodies and commercial vehicles - Tarpaulins - Part 1: Minimum requirements |
| EN 12195-2:2000 | Load restraint assemblies on road vehicles - Safety - Part 2: Web lashing made from man-made fibres |
| DIN 15190-101:1991-04 | Freight containers; land containers; principal dimensions, corner fittings, test |
| VDI 2700 Blatt 9:2006-04 | Securing loads on road vehicles - Securing of hard paperrolls |
| VDI 1000:2017-02 | VDI Standardisation Work - Principles and procedures |
| VDI 2700 Blatt 11:2006-10 | Securing of loads on road vehicles - Securing of reinforcing steel |
| EN 452:1995 | Swap bodies - Swap bodies of Class A - Dimensions and general requirements |
| VDI 2700 Blatt 2:2014-07 | Securing of loads on road vehicles - Calculation of tie-down forces - Fundamentals |
| VDI 2700 Blatt 16:2009-07 | Securing of loads on road vehicles - Securing of loads on transporter up to a total mass of 7,5 t |
| DIN EN 12195-4:2004-04 | Load restraint assemblies on road vehicles - Safety - Part 4: Lashing steel wire ropes |
| VDI 2700 Blatt 3.2:2006-09 | Securing of loads on road vehicles - Vehicles equipments and securing aids for load |
| VDI 2700 Blatt 15:2009-05 | Securing of loads on road vehicles - Slip-inhibiting materials |
| EN ISO 6346:1995/A3:2012 | Freight containers - Coding, identification and marking - Amendment 3 (ISO 6346:1995/Amd 3:2012) |
| EN 12640:2000 | Securing of cargo on road vehicles - Lashing points on commercial vehicles for goods transportation - Minimum requirements and testing |
| EN 12195-4:2003 | Load restraint assemblies on road vehicles - Safety - Part 4: Lashing steel wire ropes |
| UIC 591 : 3ED 2007 | ROLLER UNITS FOR HORIZONTAL TRANSSHIPMENT - TECHNICAL CONDITIONS GOVERNING THEIR USE IN INTERNATIONAL TRAFFIC |
| EN 12410:1999 | Swap bodies - Thermal swap bodies of Class A - Dimensions and general requirements |
| ISO 668:2013 | Series 1 freight containers Classification, dimensions and ratings |
| DIN EN 12195-3:2001-07 | LOAD RESTRAINT ASSEMBLIES ON ROAD VEHICLES - SAFETY - PART 3: LASHING CHAINS |
| VDI 2700 Blatt 14:2011-09 | Securing of loads on road vehicles - Determination of coefficients of friction |
| DIN EN 12195-2:2001-02 | LOAD RESTRAINT ASSEMBLIES ON ROAD VEHICLES - SAFETY - PART 2: WEB LASHING MADE FROM MAN-MADE FIBRES |
| VDI 2700 Blatt 17:2009-04 | Securing of loads on road vehicles - Securing of skips on skip loader vehicles and their trailers |
| ISO 27956:2009 | Road vehicles — Securing of cargo in delivery vans — Requirements and test methods |
| DIN 70010:2001-04 | SYSTEM OF ROAD VEHICLES - VOCABULARY OF POWER-DRIVEN VEHICLES, COMBINATIONS OF VEHICLES AND TOWED VEHICLES |
| VDI 2700 Blatt 8.2:2010-12 | Securing of loads on road vehicles - Securing of trucks on vehicle transporters |
| UIC 596-5 : 5ED 2014 | TRANSPORT OF ROAD VEHICLES ON WAGONS - TECHNICAL ORGANISATION - CONVEYANCE OF SEMI-TRAILERS WITH P CODING OR N CODING ON RECESS WAGONS |
| EN 12641-2:2006 | Swap bodies and commercial vehicles - Tarpaulins - Part 2: Minimum requirements for curtainsiders |
| UIC 597 : 1991 REPRINT 1993 | PIGGYBACK SYSTEM - SEMI-TRAILERS ON BOGIES - CHARACTERISTICS |
| ISO 8323:1985 | Freight containers — Air/surface (intermodal) general purpose containers — Specification and tests |
| DIN EN 283:1991-08 | SWAP BODIES - TESTING |
| VDI 2700 Blatt 19:2011-01 | Securing of loads on road vehicles - Rolled steel strip, sheets, and section steel |
| DIN EN 12410:1999-08 | SWAP BODIES - THERMAL SWAP BODIES OF CLASS A - DIMENSIONS AND GENERAL REQUIREMENTS |
| DIN ISO 1161:1981-07 | SERIES 1 FREIGHT CONTAINERS - CORNER FITTINGS - SPECIFICATION |
| EN 283:1991 | Swap bodies - Testing |
| VDI 2700 Blatt 6:2006-10 | Securing of loads on road vehicles - Part-load consignment |
US$59.43
Excluding Tax where applicable
USD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - German - English
PDF - German - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.