• There are no items in your cart

VDI 3456:2009-12

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Emission control - Refinishing and finishing of vehicles
Available format(s)

Hardcopy , PDF

Superseded date

04-08-2022

Language(s)

German - English

Published date

12-01-2009

Preliminary note
Introduction
1. Scope
2. Terms and definitions
3. Technology
4. Measures for emission control
5. Emission limits
6. Instructions for calculating emissions and
    VOC values
7. Other effects on the environment (solid
    and liquid waste, noise, soil contamination)
8. Energy saving measures
9. Occupational health and safety and accident
    prevention
10. Future technical measures for reducing
    emissions and saving energy
Annex - Example of a reduction scheme and proof of
        compliance by means of a solvent management plan
Bibliography

Describes the covers paint applications for vehicles governed by Directive 2007/46/EC (supersedes Directive 70/156/EEC) in the version that is currently in force.

DevelopmentNote
DRAFT 2017 issued in February 2017. (02/2017)
DocumentType
Standard
Pages
96
PublisherName
Verlag des Vereins Deutscher Ingenieure
Status
Superseded
SupersededBy
Supersedes

VDI 3457:2016-06 Emission control - Powder coating
VDI 4075 Blatt 2:2015-08 Cleaner production (PIUS) - Painting processes
VDI 3455:2013-08 Emission control - High-volume car body painting plants
VDI 3781 Blatt 4:2017-07 Environmental meteorology - Discharge conditions for exhaust gases - Small and medium combustion systems and other installations

EN 12921-2:2005+A1:2008 Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 2: Safety of machines using water based cleaning liquids
BGI 509 : 2009
VDI 2448 Blatt 1:1992-04 Planning of spot sampling measurements of stationary source emissions
EN 14387:2004+A1:2008 Respiratory protective devices - Gas filter(s) and combined filter(s) - Requirements, testing, marking
DIN EN 12921-1:2011-02 Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 1: Common safety requirements (includes Amendment A1:2010)
EN 12757-1:2005+A1:2010 Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery for use in vehicle refinishing
BGV A 8 : 2002
BGI 503 : 2011
BGR 190 : 2011
BGR 157 : 2005
EN 1953:2013 Atomising and spraying equipment for coating materials - Safety requirements
EN 12021:2014 Respiratory equipment - Compressed gases for breathing apparatus
DIN EN ISO 11890-2:2013-07 PAINTS AND VARNISHES - DETERMINATION OF VOLATILE ORGANIC COMPOUND (VOC) CONTENT - PART 2: GAS-CHROMATOGRAPHIC METHOD (ISO 11890-2:2013)
DIN EN ISO 11890-1:2007-09 PAINTS AND VARNISHES - DETERMINATION OF VOLATILE ORGANIC COMPOUND (VOC) CONTENT - PART 1: DIFFERENCE METHOD
TRGS 440 : 2002 ERMITTELN UND BEURTEILEN DER GEFAEHRDUNGEN DURCH GEFAHRSTOFFE AM ARBEITSPLATZ: ERMITTELN VON GEFAHRSTOFFEN UND METHODEN ZUR ERSATZSTOFFPRUEFUNG
DIN EN 12021:2014-07 RESPIRATORY EQUIPMENT - COMPRESSED GASES FOR BREATHING APPARATUS
BGV B 3 : 1997
EN ISO 11890-2:2013 PAINTS AND VARNISHES - DETERMINATION OF VOLATILE ORGANIC COMPOUND (VOC) CONTENT - PART 2: GAS-CHROMATOGRAPHIC METHOD (ISO 11890-2:2013)
DIN EN 12921-2:2010-01 Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 2: Safety of machines using water based cleaning liquids (includes Amendment A1:2008)
EN 12921-4:2005+A1:2008 Machines for surface cleaning and pretreatment of industrial items using liquids and vapours - Part 4: Safety of machines using halogenated solvents
DIN EN 13966-1:2003-09 DETERMINATION OF THE TRANSFER EFFICIENCY OF ATOMISING AND SPRAYING EQUIPMENT FOR LIQUID COATING MATERIALS - PART 1: FLAT PANELS
DIN EN 12921-3:2010-02 Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 3: Safety of machines using flammable cleaning liquids (includes Amendment A1:2008)
EN 13966-1 : 2003 DETERMINATION OF THE TRANSFER EFFICIENCY OF ATOMISING AND SPRAYING EQUIPMENT FOR LIQUID COATING MATERIALS - PART 1: FLAT PANELS
VDI 2280:2005-08 Requirements for discharge of organic solvents
VDI 3455:2013-08 Emission control - High-volume car body painting plants
VDMA 24366 : 1998 MASCHINEN UND ANLAGEN FUER DIE OBERFLAECHENTECHNIK - BESTIMMUNG DES AUFTRAGSWIRKUNGSGRADES FUER LACKZERSTAEUBER OHNE ELEKTROSTATISCHE UNTERSTUETZUNG
DIN EN ISO 4618:2015-01 Paints and varnishes - Terms and definitions (ISO 4618:2014); Trilingual version EN ISO 4618:2014
EN 13649:2001 Stationary source emissions - Determination of the mass concentration of individual gaseous organic compounds - Activated carbon and solvent desorption method
BGR A1 : 2009
EN ISO 3251:2008 Paints, varnishes and plastics - Determination of non-volatile-matter content (ISO 3251:2008)
VDI 3476 Blatt 1:2015-06 Waste gas cleaning - Methods of catalytic waste gas cleaning - Fundamentals
BGR 133 : 2004 RULES FOR THE EQUIPMENT OF WORK PLACES WITH FIRE EXTINGUISHERS
EN 13526:2001 Stationary source emissions - Determination of the mass concentration of total gaseous organic carbon in flue gases from solvent using processes - Continuous flame ionisation detector method
EN 13725:2003/AC:2006 AIR QUALITY - DETERMINATION OF ODOUR CONCENTRATION BY DYNAMIC OLFACTOMETRY
TRGS 602 : 1988 ERSATZSTOFFE UND VERWENDUNGSBESCHRAENKUNGEN - ZINKCHROMATE UND STRONTIUMCHROMAT ALS PIGMENTE FUER KORROSIONSSCHUTZ-BESCHICHTUNGSSTOFFE
DIN EN 12921-4:2010-06 Machines for surface cleaning and pretreatment of industrial items using liquids and vapours - Part 4: Safety of machines using halogenated solvents (includes Amendment A1:2008)
BGR 121 : 2004
EN 15259:2007 Air quality - Measurement of stationary source emissions - Requirements for measurement sections and sites and for the measurement objective, plan and report
BGR 231 : 2006
EN 12215:2004+A1:2009 Coating plants - Spray booths for application of organic liquid coating materials - Safety requirements
BGI 560 : 2010
VDI 4220:2011-04 Quality assurance - Requirements on bodies for the determination of air pollutants at stationary sources and in ambient air
VDI 3781 Blatt 4:2017-07 Environmental meteorology - Discharge conditions for exhaust gases - Small and medium combustion systems and other installations
BGR 104 : 2014
VDI 1000:2017-02 VDI Standardisation Work - Principles and procedures
VDI 3481 Blatt 4:2007-02 Gaseous emission measurement - Measurement of the concentrations of total organic carbon and methane carbon using the flame ionisation detector (FID)
EN 12921-1:2005+A1:2010 Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 1: Common safety requirements
ISO 11890-1:2007 Paints and varnishes — Determination of volatile organic compound (VOC) content — Part 1: Difference method
EN 12753:2005+A1:2010 Thermal cleaning systems for exhaust gas from surface treatment equipment - Safety requirements
TRGS 400 : 2017
TRGS 402 : 2010 AMD 2016 IDENTIFICATION AND ASSESSMENT OF THE RISKS FROM ACTIVITIES INVOLVING HAZARDOUS SUBSTANCES: INHALATION EXPOSURE
DIN EN 14387:2008-05 Respiratory protective devices - Gas filter(s) and combined filter(s) - Requirements, testing, marking (includes Amendment A1:2008)
EN 12921-3:2005+A1:2008 Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 3: Safety of machines using flammable cleaning liquids
DIN EN 13355:2010-06 COATING PLANTS - COMBINED BOOTHS - SAFETY REQUIREMENTS
PREN 1539 : DRAFT 2012 DRYERS AND OVENS, IN WHICH FLAMMABLE SUBSTANCES ARE RELEASED - SAFETY REQUIREMENTS
DIN EN 12753:2011-02 Thermal cleaning systems for exhaust gas from surface treatment equipment - Safety requirements (includes Amendment A1:2010)
VDI 3674:2013-04 Waste gas cleaning by adsorption - Process gas and waste gas cleaning
BGI 508 : 2005
DIN EN 12757-1:2011-02 Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery for use in vehicle refinishing (includes Amendment A1:2010)
DIN EN 746-2:2011-02 Industrial thermoprocessing equipment - Part 2: Safety requirements for combustion and fuel handling systems
DIN EN ISO 3251:2008-06 PAINTS, VARNISHES AND PLASTICS - DETERMINATION OF NON-VOLATILE MATTER CONTENT
EN ISO 11890-1:2007 Paints and varnishes - Determination of volatile organic compound (VOC) content - Part 1: Difference method (ISO 11890-1:2007)
ISO 4618:2014 Paints and varnishes — Terms and definitions
DIN EN 13526:2002-05 STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE MASS CONCENTRATION OF TOTAL GASEOUS ORGANIC CARBON IN FLUE GASES FROM SOLVENT USING PROCESSES - CONTINUOUS FLAME IONISATION DETECTOR METHOD
VDI 3477:2016-03 Biological waste gas purification - Biofilters
DIN EN 143:2007-02 Respiratory protective devices - Particle filters - Requirements, testing, marking (includes Corrigendum AC:2005 + Amendment A1:2006)
VDI 4075 Blatt 2:2015-08 Cleaner production (PIUS) - Painting processes
BGR 180 : 1992
DIN EN 13725:2003-07 Air quality - Determination of odour concentration by dynamic olfactometry
VDI 2066 Blatt 1:1975-10 Particulate matter measurement; measuring of particulate matter in flowing gases; gravimetric determination of dust load; fundamentals
DIN EN 1953:2013-12 ATOMISING AND SPRAYING EQUIPMENT FOR COATING MATERIALS - SAFETY REQUIREMENTS
EN 13355:2004+A1:2009 Coating plants - Combined booths - Safety requirements
VDI 3478 Blatt 2:2008-04 Biological waste gas purification - Biological trickle bed-reactors
TRGS 430 : 2009
ISO 11890-2:2013 Paints and varnishes Determination of volatile organic compound (VOC) content Part 2: Gas-chromatographic method
BGR 500 : SEP 2008
VDI 3781 Blatt 2:1981-08 Dispersion of pollutants in the atmosphere; stack heights with regard to rugged terrain
VDI 3478 Blatt 1:2011-03 Biological waste gas purification - Bioscrubbers
DIN EN 15259:2008-01 Air quality - Measurement of stationary source emissions - Requirements for measurement sections and sites and for the measurement objective, plan and report
DIN 55945:2016-08 PAINTS AND VARNISHES - ADDITIONAL TERMS AND DEFINITIONS TO DIN EN ISO 4618
TRGS 403 : 1989
EN ISO 4618:2014 Paints and varnishes - Terms and definitions (ISO 4618:2014)
VDI 3462 Blatt 6:2009-03 Emission control - Wood machining and processing - Facility-specific measuring instructions
BGV A 1 : 2008

View more information
US$218.43
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.