EN 50268-1:1999
|
Common test methods for cables under fire conditions - Measurement of smoke density of cables burning under defined conditions - Part 1: Apparatus
|
EN 50266-2-4 : 2001 COR 2002
|
COMMON TEST METHODS FOR CABLES UNDER FIRE CONDITIONS - TEST FOR VERTICAL FLAME SPREAD OF VERTICALLY- MOUNTED BUNCHED WIRES OR CABLES - PART 2-4: PROCEDURES - CATEGORY C
|
ISO 5660-1:2015
|
Reaction-to-fire tests Heat release, smoke production and mass loss rate Part 1: Heat release rate (cone calorimeter method) and smoke production rate (dynamic measurement)
|
ISO 3261:1975
|
Fire tests — Vocabulary
|
ISO 5658-2:2006
|
Reaction to fire tests Spread of flame Part 2: Lateral spread on building and transport products in vertical configuration
|
ISO 9705:1993
|
Fire tests Full-scale room test for surface products
|
PREN 45545-5 : DRAFT 2010
|
RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 5: FIRE SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT INCLUDING THAT OF TROLLEY BUSES, TRACK GUIDED BUSES AND MAGNETIC LEVITATION VEHICLES
|
IEC 60695-1-1:1999
|
Fire hazard testing - Part 1-1: Guidance for assessing the fire hazard of electrotechnical products - General guidelines
|
IEC 60695-4:2012
|
Fire hazard testing - Part 4: Terminology concerning fire tests for electrotechnical products
|
IEC TS 60695-1-40:2002
|
Fire hazard testing - Part 1-40: Guidance for assessing the fire hazard of electrotechnical products - Insulating liquids
|
PREN 45545-3 : DRAFT 2010
|
RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 3: FIRE RESISTANCE REQUIREMENTS FOR FIRE BARRIERS
|
ISO 5659-2:2017
|
Plastics — Smoke generation — Part 2: Determination of optical density by a single-chamber test
|
EN ISO 5659-2:2017
|
Plastics - Smoke generation - Part 2: Determination of optical density by a single-chamber test (ISO 5659-2:2017)
|
ISO 11925-2:2010
|
Reaction to fire tests Ignitability of products subjected to direct impingement of flame Part 2: Single-flame source test
|
ISO 13943:2017
|
Fire safety — Vocabulary
|
EN 50266-1:2001
|
Common test methods for cables under fire conditions - Test for vertical flame spread of vertically-mounted bunched wires or cables - Part 1: Apparatus
|
ISO 12952-4:1998
|
Textiles Burning behaviour of bedding items Part 4: Specific test methods for the ignitability by a small open flame
|
EN 13238:2010
|
Reaction to fire tests for building products - Conditioning procedures and general rules for selection of substrates
|
PREN 45545-6 : DRAFT 2010
|
RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 6: FIRE CONTROL AND MANAGEMENT SYSTEMS
|
PREN 45545-1 : DRAFT 2010
|
RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 1: GENERAL
|
ISO 15540:2016
|
Ships and marine technology — Fire resistance of non-metallic hose assemblies and non-metallic compensators — Test methods
|
ISO/TR 9705-2:2001
|
Reaction-to-fire tests Full-scale room tests for surface products Part 2: Technical background and guidance
|
EN ISO 9239-1:2010
|
Reaction to fire tests for floorings - Part 1: Determination of the burning behaviour using a radiant heat source (ISO 9239-1:2010)
|
EN ISO 12952-4 : 1998
|
TEXTILES - BURNING BEHAVIOUR OF BEDDING ITEMS - PART 4: SPECIFIC TEST METHODS FOR THE IGNITABILITY BY A SMALL OPEN FLAME
|
EN 60695-4:2012
|
FIRE HAZARD TESTING - PART 4: TERMINOLOGY CONCERNING FIRE TESTS FOR ELECTROTECHNICAL PRODUCTS (IEC 60695-4:2012)
|
NFX 70 100-1 : 2006
|
FIRE TESTS - ANALYSIS OF GASEOUS EFFLUENTS - PART 1: METHODS FOR ANALYSING GASES STEMMING FROM THERMAL DEGRADATION
|
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV
|
Degrees of protection provided by enclosures (IP Code)
|
EN 50268-2:1999
|
Common test methods for cables under fire conditions - Measurement of smoke density of cables burning under defined conditions - Part 2: Procedure
|
ISO 12952-3:1998
|
Textiles Burning behaviour of bedding items Part 3: General test methods fot the ignitability by a small open flame
|
ISO 8421-1:1987
|
Fire protection — Vocabulary — Part 1: General terms and phenomena of fire
|
EN ISO 13943:2017
|
Fire safety - Vocabulary (ISO 13943:2017)
|
EN ISO 4589-2:2017
|
Plastics - Determination of burning behaviour by oxygen index - Part 2: Ambient-temperature test (ISO 4589-2:2017)
|
ISO 4589-2:2017
|
Plastics — Determination of burning behaviour by oxygen index — Part 2: Ambient-temperature test
|
EN ISO 12952-3 : 1998
|
TEXTILES - BURNING BEHAVIOUR OF BEDDING ITEMS - PART 3: GENERAL TEST METHODS FOR THE IGNITABILITY BY A SMALL OPEN FLAME
|
EN 60529:1991/AC:2016-12
|
DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015)
|
ISO 9239-1:2010
|
Reaction to fire tests for floorings Part 1: Determination of the burning behaviour using a radiant heat source
|
EN ISO 11925-2:2010/AC:2011
|
REACTION TO FIRE TESTS - IGNITABILITY OF PRODUCTS SUBJECTED TO DIRECT IMPINGEMENT OF FLAME - PART 2: SINGLE-FLAME SOURCE TEST
|
NFF 00 201 : 1993
|
RAILWAY MATERIAL IN GENERAL - ANTIVANDALISM PROTECTION - TEST METHOD OF LACERATION RESISTANCE, WITH A BLADE, OF VANDAL-PROOF COVERING
|