EN 326-3:2003
|
Wood-based panels - Sampling, cutting and inspection - Part 3: Inspection of an isolated lot of panels
|
EN 321:2001
|
Wood-based panels - Determination of moisture resistance under cyclic test conditions
|
EN 319:1993
|
Particleboards and fibreboards - Determination of tensile strength perpendicular to the plane of the board
|
EN 13986:2004
|
Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking
|
EN 310:1993
|
Wood-based panels - Determination of modulus of elasticity in bending and of bending strength
|
EN 1087-1:1995
|
Particleboards - Determination of moisture resistance - Part 1: Boil test
|
EN 326-1:1994
|
Wood-based panels - Sampling, cutting and inspection - Part 1: Sampling and cutting of test pieces and expression of test results
|
EN 326-2:2010+A1:2014
|
Wood-based panels - Sampling, cutting and inspection - Part 2: Initial type testing and factory production control
|
ENV 1156:1998
|
Wood-based panels - Determination of duration of load and creep factors
|
EN 317:1993
|
Particleboards and fibreboards - Determination of swelling in thickness after immersion in water
|
EN 1058:2009
|
Wood-based panels - Determination of characteristic 5-percentile values and characteristic mean values
|
EN 789:2004
|
Timber structures - Test methods - Determination of mechanical properties of wood based panels
|
EN 320:2011
|
Particleboards and fibreboards - Determination of resistance to axial withdrawal of screws
|
EN 12369-1:2001
|
Wood-based panels - Characteristic values for structural design - Part 1: OSB, particleboards and fibreboards
|
EN 318:2002
|
Wood based panels - Determination of dimensional changes associated with changes in relative humidity
|
EN 335-3:1995
|
Durability of wood and wood-based products - Definition of hazard classes of biological attack - Part 3: Application to wood-based panels
|
EN 382-1:1993
|
Fibreboards - Determination of surface absorption - Part 1: Test method for dry process fibreboards
|
EN 622-3:2004
|
Fibreboards - Specifications - Part 3: Requirements for medium boards
|
EN 316:2009
|
Wood fibre boards - Definition, classification and symbols
|
EN 622-2:2004/AC:2005
|
FIBREBOARDS - SPECIFICATIONS - PART 2: REQUIREMENTS FOR HARDBOARDS
|
EN 622-4:2009
|
Fibreboards - Specifications - Part 4: Requirements for softboards
|
EN 12871:2013
|
Wood-based panels - Determination of performance characteristics for load bearing panels for use in floors, roofs and walls
|
ENV 12872 : DRAFT 2000
|
WOOD-BASED PANELS - GUIDANCE ON THE USE OF LOAD-BEARING BOARDS IN FLOORS, WALLS AND ROOFS
|
EN 622-1:2003
|
Fibreboards - Specifications - Part 1: General requirements
|
EN 311:2002
|
Wood-based panels - Surface soundness - Test method
|
ISO 3340:1976
|
Fibre building boards — Determination of sand content
|