• There are no items in your cart

05/30128234 DC : DRAFT FEB 2005

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

EN 1473 - INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN OF ONSHORE INSTALLATIONS
Superseded date

02-28-2007

Published date

11-23-2012

EN 1473.

Committee
GSE/38
DocumentType
Draft
PublisherName
British Standards Institution
Status
Superseded
SupersededBy

EN 1127-1:2011 Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology
IEC 60079-1:2014 RLV Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d"
IEC 60364-5-54:2011 Low-voltage electrical installations - Part 5-54: Selection and erection of electrical equipment - Earthing arrangements and protective conductors
EN 13766:2010 Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of liquid petroleum gas and liquefied natural gas - Specification
ENV 1992-1-2 : DRAFT 95 COR 96 EUROCODE 2 - DESIGN OF CONCRETE STRUCTURES - GENERAL RULES - STRUCTURAL FIRE DESIGN
IEC 60079-10:2002 Electrical apparatus for explosive gas atmospheres - Part 10: Classification of hazardous areas
EN 1514-1:1997 Flanges and their joints - Dimensions of gaskets for PN-designated flanges - Part 1: Non-metallic flat gaskets with or without inserts
IEC TS 60079-27:2002 Electrical apparatus for explosive gas atmospheres - Part 27: Fieldbus intrinsically safe concept (FISCO)
EN 12162:2001+A1:2009 Liquid pumps - Safety requirements - Procedure for hydrostatic testing
EN 12838:2000 Installations and equipment for liquefied natural gas - Suitability testing of LNG sampling systems
ISO 15664:2001 Acoustics — Noise control design procedures for open plant
NFPA 921 : 2017 GUIDE FOR FIRE AND EXPLOSION INVESTIGATIONS
EN ISO 10456:2007/AC:2009 BUILDING MATERIALS AND PRODUCTS - HYGROTHERMAL PROPERTIES - TABULATED DESIGN VALUES AND PROCEDURES FOR DETERMINING DECLARED AND DESIGN THERMAL VALUES
EN 61508-1:2010 Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 1: General requirements
EN 288-1:1992/A1:1997 SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - GENERAL RULES FOR FUSION WELDING
ENV 1998-5 : 1994 EUROCODE 8: DESIGN PROVISIONS FOR EARTHQUAKE RESISTANCE OF STRUCTURES - FOUNDATIONS, RETAINING STRUCTURES AND GEOTECHNICAL ASPECTS
IEC 60502:1994 Extruded solid dielectric insulated power cables for rated voltages from 1 kV up to 30 kV
IEC TR 60079-20:1996 Electrical apparatus for explosive gas atmospheres - Part 20: Data for flammable gases and vapours, relating to the use of electrical apparatus
EN 288-3:1992/A1:1997 SPECIFICATION AND APPROVAL OF WELDING PROCEDURES FOR METALLIC MATERIALS - PART 3: WELDING PROCEDURE TESTS FOR THE ARC WELDING OF STEELS
EN 50054:1998 Electrical apparatus for the detection and measurement of combustible gases - General requirements and test methods
IEC 60079-19:2010+AMD1:2015 CSV Explosive atmospheres - Part 19: Equipment repair, overhaul and reclamation
EN ISO 1461:2009 Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test methods (ISO 1461:2009)
EN 1474 : 1997 INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN AND TESTING OF LOADING/UNLOADING ARMS
IEC 60079-17:2013 Explosive atmospheres - Part 17: Electrical installations inspection and maintenance
EN 12483:1999 Liquid pumps - Pump units with frequency inverters - Guarantee and compatibility tests
EN 12065 : 1997 INSTALLATIONS AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - TESTING OF FOAM CONCENTRATES DESIGNED FOR GENERATION OF MEDIUM AND HIGH EXPANSION FOAM AND OF EXTINGUISHING POWDERS USED ON LIQUEFIED NATURAL GAS FIRES
EN 1714:1997/A2:2003 NON-DESTRUCTIVE TESTING OF WELDS - ULTRASONIC TESTING OF WELDED JOINTS
EN 1594:2013 Gas infrastructure - Pipelines for maximum operating pressure over 16 bar - Functional requirements
ENV 1991-2-2 : 1995 EUROCODE 1 - BASIS OF DESIGN AND ACTIONS ON STRUCTURES - ACTIONS ON STRUCTURES EXPOSED TO FIRE
NFA 49 244 : 1993 STEEL TUBES - WELDED AUSTENITIC STAINLESS AND AUSTENITIC FERRITIC STEEL ROLLED TUBES FOR PRESSURE SERVICE - DIMENSIONS, TECHNICAL CONDITIONS FOR DELIVERY
IEC 60079-18:2014 RLV Explosive atmospheres - Part 18: Equipment protection by encapsulation “m”
EN 823:2013 Thermal insulating products for building applications - Determination of thickness
EN ISO 5199 : 2002 TECHNICAL SPECIFICATIONS FOR CENTRIFUGAL PUMPS - CLASS 2
EN ISO 9002:1994/AC:1997 QUALITY SYSTEMS - SPECIFICATION FOR PRODUCTION AND INSTALLATION
EN 1050 : 1996 SAFETY OF MACHINERY - PRINCIPLES FOR RISK ASSESSMENT
ENV 1994-1-2 : 94 AC 95 EUROCODE 4: DESIGN OF COMPOSITE STEEL AND CONCRETE STRUCTURES - GENERAL RULES - STRUCTURAL FIRE DESIGN
EN 13645:2001 Installations and equipment for liquefied natural gas - Design of onshore installations with a storage capacity between 5 t and 200 t
EN 473:2008 Non-destructive testing - Qualification and certification of NDT personnel - General principles
IEC TR 60079-16:1990 Electrical apparatus for explosive gas atmospheres. Part 16: Artificial ventilation for the protection of analyser(s) houses
IEC 60079-5:2015 RLV Explosive atmospheres - Part 5: Equipment protection by powder filling "q"
ENV 1994-1-1 : 1992 EUROCODE 4 - DESIGN OF COMPOSITE STEEL AND CONCRETE STRUCTURES - GENERAL RULES FOR BUILDINGS
EN 50057:1998 Electrical apparatus for the detection and measurement of combustible gases - Performance requirements for Group II apparatus indicating up to 100 % lower explosive limit
NFC 17 100 : 1997 PROTECTION OF STRUCTURES AGAINST LIGHTNING - INSTALLATION OF LIGHTNING PROTECTIVE SYSTEM
EN 288-2:1992/A1:1997 SPECIFICATION AND APPROVAL OF WELDING PROCEDURES FOR METALLIC MATERIALS - PART 2: WELDING PROCEDURE SPECIFICATION FOR ARC WELDING
IEC 60079-11:2011 Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i"
EN ISO 1460 : 1994 METALLIC COATINGS - HOT DIP GALVANIZED COATINGS ON FERROUS MATERIALS - GRAVIMETRIC DETERMINATION OF THE MASS PER UNIT AREA
EN ISO 9001:2015 Quality management systems - Requirements (ISO 9001:2015)
EN 809 : 1998 COR 2010 PUMPS AND PUMP UNITS FOR LIQUIDS - COMMON SAFETY REQUIREMENTS
EN 12308 : 1998 INSTALLATIONS AND EQUIPMENT FOR LNG - SUITABILITY TESTING OF GASKETS DESIGNED FOR FLANGED JOINTS USED ON LNG PIPING
IEC 60079-25:2010 Explosive atmospheres - Part 25: Intrinsically safe electrical systems
IEC 60079-6:2015 Explosive atmospheres - Part 6: Equipment protection by liquid immersion "o"
ENV 1998-1-2 : 1994 EUROCODE 8: DESIGN PROVISIONS FOR EARTHQUAKE RESISTANCE OF STRUCTURES - GENERAL RULES - GENERAL RULES FOR BUILDINGS
IEC 60079-0:2011 Explosive atmospheres - Part 0: Equipment - General requirements
EN 1160 : 1996 INSTALLATIONS AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - GENERAL CHARACTERISTICS OF LIQUEFIED NATURAL GAS
EN 10204:2004 Metallic products - Types of inspection documents
EN 60079-10:2003 Electrical apparatus for explosive gas atmospheres - Part 10: Classification of hazardous areas
IEC 60079-14:2013 Explosive atmospheres - Part 14: Electrical installations design, selection and erection
EN ISO 12241:2008 Thermal insulation for building equipment and industrial installations - Calculation rules (ISO 12241:2008)
EN ISO 14001:2015 Environmental management systems - Requirements with guidance for use (ISO 14001:2015)
EN ISO 9906:2012 Rotodynamic pumps - Hydraulic performance acceptance tests - Grades 1, 2 and 3 (ISO 9906:2012)
EN 60079-14:2014/AC:2016 EXPLOSIVE ATMOSPHERES - PART 14: ELECTRICAL INSTALLATIONS DESIGN, SELECTION AND ERECTION (IEC 60079-14:2013/COR1:2016)
ISO 13709:2009 Centrifugal pumps for petroleum, petrochemical and natural gas industries
EN 1532 : 1997 INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - SHIP TO SHORE INTERFACE
ENV 1998-1-1 : 1994 EUROCODE 8: DESIGN PROVISIONS FOR EARTHQUAKE RESISTANCE OF STRUCTURES - GENERAL RULES - SEISMIC ACTIONS AND GENERAL REQUIREMENTS FOR STRUCTURES
EN 60529:1991/AC:2016-12 DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015)
EN 12567:2000 Industrial valves - Isolating valves for LNG - Specification for suitability and appropriate verification tests
ENV 1993-1-2 : DRAFT 95 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN
ENV 1992-1-1 : DRAFT 91 COR 1992 EUROCODE 2: DESIGN OF CONCRETE STRUCTURES - GENERAL RULES AND RULES FOR BUILDINGS
EN 571-1:1997 Non destructive testing - Penetrant testing - Part 1: General principles
EN 970:1997 Non-destructive examination of fusion welds - Visual examination
ENV 1993-1-1:1992/A2:1998 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - GENERAL RULES AND RULES FOR BUILDINGS
EN ISO 9000:2015 Quality management systems - Fundamentals and vocabulary (ISO 9000:2015)
IEC 60079-15:2010 Explosive atmospheres - Part 15: Equipment protection by type of protection "n"
IEC 60079-13:2017 Explosive atmospheres - Part 13: Equipment protection by pressurized room "p" and artificially ventilated room "v"
IEC 60079-26:2014 RLV Explosive atmospheres - Part 26: Equipment with Equipment Protection Level (EPL) Ga
EN 1435:1997/A2:2003 NON-DESTRUCTIVE TESTING OF WELDS - RADIOGRAPHIC TESTING OF WELDED JOINTS
EN 60034-5:2001/A1:2007 ROTATING ELECTRICAL MACHINES - PART 5: DEGREES OF PROTECTION PROVIDED BY THE INTEGRAL DESIGN OF ROTATING ELECTRICAL MACHINES (IP CODE) - CLASSIFICATION
NFC 15 100 : 2002 AMD 5 2015 LOW-VOLTAGE ELECTRICAL INSTALLATIONS
EN 1776:2015 Gas infrastructure - Gas measuring systems - Functional requirements
EN 287-1:2011 Qualification test of welders - Fusion welding - Part 1: Steels
EN 12066 : 1997 INSTALLATIONS AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - TESTING OF INSULATING LININGS FOR LIQUEFIED NATURAL GAS IMPOUNDING AREAS

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.