ISO 12499:1999
|
Industrial fans Mechanical safety of fans Guarding
|
IEC 60079-10:2002
|
Electrical apparatus for explosive gas atmospheres - Part 10: Classification of hazardous areas
|
API 500 : 2012
|
RECOMMENDED PRACTICE FOR CLASSIFICATION OF LOCATIONS FOR ELECTRICAL INSTALLATIONS AT PETROLEUM FACILITIES CLASSIFIED AS CLASS 1, DIVISION 1 AND DIVISION 2
|
ISO 3744:2010
|
Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane
|
EN 1505:1997
|
Ventilation for buildings - Sheet metal air ducts and fittings with rectangular cross section - Dimensions
|
NS 5575 : 1ED 1987
|
VENTILATION DUCTS - IDENTIFICATION COLOURS
|
NFPA 96 : 2017
|
VENTILATION CONTROL AND FIRE PROTECTION OF COMMERCIAL COOKING OPERATIONS
|
EN 378-4:2016
|
Refrigerating systems and heat pumps - Safety and environmental requirements - Part 4: Operation, maintenance, repair and recovery
|
ISO 14694:2003
|
Industrial fans Specifications for balance quality and vibration levels
|
EN 378-1:2016
|
Refrigerating systems and heat pumps - Safety and environmental requirements - Part 1: Basic requirements, definitions, classification and selection criteria
|
EN 378-3:2016
|
Refrigerating systems and heat pumps - Safety and environmental requirements - Part 3: Installation site and personal protection
|
ISO 7547:2002
|
Ships and marine technology Air-conditioning and ventilation of accommodation spaces Design conditions and basis of calculations
|
ISO 5149:1993
|
Mechanical refrigerating systems used for cooling and heating Safety requirements
|
PREN 1886 : DRAFT 2003
|
VENTILATION FOR BUILDINGS - AIR HANDLING UNITS - MECHANICAL PERFORMANCE
|
PREN 1507 : DRAFT 1994
|
VENTILATION FOR BUILDINGS - DUCTWORK - RECTANGULAR SHEET METAL AIR DUCTS - STRENGTH AND LEAKAGE - REQUIREMENTS AND TESTING
|
ISO 9309:1989
|
Refrigerant compressors Presentation of performance data
|
ISO 8861:1998
|
Shipbuilding — Engine-room ventilation in diesel-engined ships — Design requirements and basis of calculations
|
ISO 1940-1:2003
|
Mechanical vibration Balance quality requirements for rotors in a constant (rigid) state Part 1: Specification and verification of balance tolerances
|
ISO 917:1989
|
Testing of refrigerant compressors
|
EN ISO 10088:2017
|
Small craft - Permanently installed fuel systems (ISO 10088:2013)
|
AMCA 500 : 1994
|
TEST METHODS FOR LOUVERS, DAMPERS AND SHUTTERS
|
EN 779:2012
|
Particulate air filters for general ventilation - Determination of the filtration performance
|
EN 1506:2007
|
Ventilation for buildings - Sheet metal air ducts and fittings with circular cross-section - Dimensions
|
AMCA 210 : 2016
|
LABORATORY METHODS OF TESTING FANS FOR CERTIFIED AERODYNAMIC PERFORMANCE RATING
|
ISO 5801:2017
|
Fans — Performance testing using standardized airways
|
EN 12237:2003
|
Ventilation for buildings - Ductwork - Strength and leakage of circular sheet metal ducts
|
ISO 12241:2008
|
Thermal insulation for building equipment and industrial installations Calculation rules
|
EN 50272-2:2001
|
Safety requirements for secondary batteries and battery installations - Part 2: Stationary batteries
|
IEC 60079-0:2011
|
Explosive atmospheres - Part 0: Equipment - General requirements
|
ISO 7730:2005
|
Ergonomics of the thermal environment — Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria
|
IP 15 : 2015
|
PETROLEUM PRODUCTS - DETERMINATION OF POUR POINT
|
EN 1751:2014
|
Ventilation for buildings - Air terminal devices - Aerodynamic testing of damper and valves
|
PREN 13053 : DRAFT 2017
|
VENTILATION FOR BUILDINGS - AIR HANDLING UNITS - RATING AND PERFORMANCE FOR UNITS, COMPONENTS AND SECTIONS
|
ISO 7235:2003
|
Acoustics — Laboratory measurement procedures for ducted silencers and air-terminal units — Insertion loss, flow noise and total pressure loss
|
API 4589 : 1993
|
Fugitive Hydrocarbon Emissions from Oil and Gas Production Operations
|
ISO 13702:2015
|
Petroleum and natural gas industries — Control and mitigation of fires and explosions on offshore production installations — Requirements and guidelines
|
EN 378-2:2016
|
Refrigerating systems and heat pumps - Safety and environmental requirements - Part 2: Design, construction, testing, marking and documentation
|
EN 12451:2012
|
Copper and copper alloys - Seamless, round tubes for heat exchangers
|