08/30178382 DC : 0

Superseded

BS EN 1218-4:2004/A2 - SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 4: EDGE BANDING MACHINES FED BY CHAIN(S)

Available format(s)

Hardcopy , PDF

Superseded date

08-31-2009

Language(s)

English

Publisher

British Standards Institution

Foreword
1 Modification to the Foreword
2 Modification to Clause 1, Scope
3 Modification to Clause 2, Normative references
4 Modification to 3.3, Definitions
5 Modification to Clause 4, List of hazards
6 Modification to 5.2.1, Safety and reliability of
control systems
7 Modification to 5.2.3, Starting
8 Modification to 5.2.4.1, Normal stopping
9 Modification to 5.2.4.2, All other stop controls
10 Modification to 5.2.5, Emergency stop
11 Modification to 5.2.7.2, Mode selection for adjustment
of tools and other processing units
12 Modification to 5.2.8, Speed changing
13 Modification to 5.2.10, Failure of the power supply
14 Modification to 5.2.11, Failure of the control circuits
15 Modification to 5.3.1, Stability
16 Modification to 5.3.2, Risk of break-up during operation
17 Modification to 5.3.3.2, Strength
18 Modification to 5.3.3.6, Spindle rings
19 Modification to 5.4.1, Fire
20 Modification to 5.4.4, Electricity
21 Modification to 5.4.5, Ergonomics and handling
22 Modification to 5.4.6, Lighting
23 Modification to 5.4.11, Radiation
24 Modification to 5.4.14, Isolation
25 Modification to 5.4.15, Maintenance
26 Modification to 6.2, Marking
27 Modification to 6.3, Instruction handbook
28 Modification to Annex A
29 Modification to Annex C
30 Modification to Annex ZA
31 Addition of Annex ZB
32 Modification to Bibliography

BS EN 1218-4:2004/A2

Committee	MTE/23
DocumentType	Draft
Pages	15
PublisherName	British Standards Institution
Status	Superseded
SupersededBy	BS EN 1218-4 : 2004

EN 1005-4:2005+A1:2008	Safety of machinery - Human physical performance - Part 4: Evaluation of working postures and movements in relation to machinery
EN 894-3:2000+A1:2008	Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 3: Control actuators
CLC/TS 61496-2:2006	Safety of machinery - Electro-sensitive protective equipment - Part 2: Particular requirements for equipment using active opto-electronic protective devices (AOPDs)
EN 894-2:1997+A1:2008	Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 2: Displays
IEC 60947-4-1:2009+AMD1:2012 CSV	Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters
EN 50370-2:2003	Electromagnetic compatibility (EMC) - Product family standard for machine tools - Part 2: Immunity
IEC 60204-1:2016	Safety of machinery - Electrical equipment of machines - Part 1: General requirements
EN ISO 13850:2015	Safety of machinery - Emergency stop function - Principles for design (ISO 13850:2015)
EN 1005-1:2001+A1:2008	Safety of machinery - Human physical performance - Part 1: Terms and definitions
EN 1005-2:2003+A1:2008	Safety of machinery - Human physical performance - Part 2: Manual handling of machinery and component parts of machinery
IEC 60947-5-1 : 4.0	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-1: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - ELECTROMECHANICAL CONTROL CIRCUIT DEVICES
EN 12779:2015	Safety of woodworking machines - Chip and dust extraction systems with fixed installation - Safety requirements
EN 614-1:2006+A1:2009	Safety of machinery - Ergonomic design principles - Part 1: Terminology and general principles
HD 21.1 : 200S4	CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V AND HAVING THERMOPLASTIC INSULATION - GENERAL REQUIREMENTS
EN 60947-4-1 : 2010 AMD 1 2012	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 4-1: CONTACTORS AND MOTOR-STARTERS - ELECTROMECHANICAL CONTACTORS AND MOTOR-STARTERS (IEC 60947-4-1:2009/A1:2012)
IEC 60439-1:1999+AMD1:2004 CSV	Low-voltage switchgear and controlgear assemblies - Part 1: Type-tested and partially type-tested assemblies
EN 60439-1:1999/A1:2004	LOW VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 1 - TYPE TESTED AND PARTIALLY TYPE TESTED ASSEMBLIES
EN 847-1:2017	Tools for woodworking - Safety requirements - Part 1: Milling tools, circular saw blades
EN ISO 13849-1:2015	Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015)
IEC 61310-1:2007	Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals
EN 1005-3:2002+A1:2008	Safety of machinery - Human physical performance - Part 3: Recommended force limits for machinery operation
EN 50370-1 : 2005	Electromagnetic compatibility (EMC) - Product family standard for machine tools - Part 1: Emission
EN 61310-1:2008	Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals
IEC 61496-2:2013	Safety of machinery - Electro-sensitive protective equipment - Part 2: Particular requirements for equipment using active opto-electronic protective devices (AOPDs)
EN 60204-1 : 2006 COR 2010	SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS
EN 894-1:1997+A1:2008	Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 1: General principles for human interactions with displays and control actuators