• There are no items in your cart

08/30190505 DC : 0

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

BS ISO 12643-1 - GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR GRAPHIC TECHNOLOGY EQUIPMENT AND SYSTEMS - PART 1: GENERAL REQUIREMENTS
Available format(s)

Hardcopy , PDF

Superseded date

07-31-2010

Language(s)

English

Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Effective date
5 Risk assessment
6 Guarding of significant hazards
   6.1 General
   6.2 Guards
   6.3 In-running (in-going) nips
   6.4 Guarding in-running nips
   6.5 Interlocks
   6.6 Hold-to-run controls
   6.7 Other safeguarding measures
   6.8 Guarding reel unwinding, rewinding and transport devices
   6.9 Threading of web material
   6.10 Feeding units, delivery units (pile lifting and lowering
         devices)
7 Requirements for protection against other hazards
   7.1 General
   7.2 Fire and explosion
   7.3 Electrical equipment
   7.4 Working platforms, access stairs, passageways and raised
         workplaces
   7.5 Stability
   7.6 High contact temperatures
   7.7 Noise
   7.8 Radiation hazards
   7.9 Stationary knives
   7.10 Rotary tools
   7.11 Transport and storage of hazardous tools
   7.12 Protruding machine parts
   7.13 Handwheels and cranks
   7.14 Routine handling of heavy machine parts
   7.15 Oxidizers, incinerators or thermal cleaning plants
   7.16 Protection against crushing and shearing hazards
8 Release from hazardous situation
9 Control zones
   9.1 General
   9.2 Purpose of zone configuration
   9.3 Motion-control stations in control zones
10 Controls
   10.1 General
   10.2 Manual control devices
   10.3 Initiating machine motion
   10.4 Hold-to-run controls
   10.5 Two-hand controls
   10.6 Electro-sensitive protective devices
   10.7 Pressure-sensitive mats, pressure-sensitive bumpers,
         trip devices
   10.8 Braking devices and clutches
11 Control stations
   11.1 Motion-control stations
   11.2 Remote access
12 Control systems
   12.1 Hydraulic, pneumatic, electric and electronic control
         systems
   12.2 Electronic adjustable speed drives
   12.3 Cut-off of main energy source
   12.4 Residual-pile monitoring systems
   12.5 Unobserved unguarded hazard zones
   12.6 Cableless controls
   12.7 Additional requirements for hand-fed machines
13 Ergonomics and labelling of indicators and actuators
14 Signals and warning devices
   14.1 General
   14.2 Audible warning system
   14.3 Area-light warning system
15 Safety signs and labels
   15.1 General
   15.2 Specific requirements for machine markings
16 Contents of instruction handbook
   16.1 Each machine
   16.2 Machines using flammable liquids
   16.3 Machines with cutting knives
   16.4 Handling heavy machine parts
   16.5 Machines with automatic paper loading
   16.6 Residual risks using ESPDs
   16.7 Pile turners and reel turners
   16.8 Pile carriers
   16.9 Residual risk for hold-to-run speeds of above 10 m/min
         under two-hand control
   16.10 Use of stroboscopes
Annex A (informative) Risk analysis relating to the pitch angle
        of access stairs
Annex B (informative) Noise
Annex C (normative) Area-light warning system
Annex D (informative) Example layout of instruction handbooks
Bibliography

Committee
PAI/43
DocumentType
Draft
Pages
88
PublisherName
British Standards Institution
Status
Superseded
SupersededBy

ISO 13855:2010 Safety of machinery Positioning of safeguards with respect to the approach speeds of parts of the human body
NFPA 91 : 2015 EXHAUST SYSTEMS FOR AIR CONVEYING OF VAPORS, GASES, MISTS, AND PARTICULATE SOLIDS
EN 1127-1:2011 Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology
IEC 60079-1:2014 RLV Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d"
EN 746-1:1997+A1:2009 Industrial thermoprocessing equipment - Part 1: Common safety requirements for industrial thermoprocessing equipment
IEC 60079-10:2002 Electrical apparatus for explosive gas atmospheres - Part 10: Classification of hazardous areas
EN 1010-2:2006+A1:2010 Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 2: Printing and varnishing machines including pre-press machinery
ISO 7010:2011 Graphical symbols Safety colours and safety signs Registered safety signs
EN 894-3:2000+A1:2008 Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 3: Control actuators
ISO 14119:2013 Safety of machinery Interlocking devices associated with guards Principles for design and selection
ISO 14122-3:2016 Safety of machinery — Permanent means of access to machinery — Part 3: Stairs, stepladders and guard-rails
ISO 14122-1:2016 Safety of machinery — Permanent means of access to machinery — Part 1: Choice of fixed means and general requirements of access
IEC 61310-2:2007 Safety of machinery - Indication, marking and actuation - Part 2: Requirements for marking
ISO/TR 11688-1:1995 Acoustics Recommended practice for the design of low-noise machinery and equipment Part 1: Planning
EN 894-2:1997+A1:2008 Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 2: Displays
NFPA 329 : 2015 HANDLING RELEASES OF FLAMMABLE AND COMBUSTIBLE LIQUIDS AND GASES
CFR 29(PTS1900-1910) : 0 LABOR - OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR
ISO 14120:2015 Safety of machinery Guards General requirements for the design and construction of fixed and movable guards
IEC 60073:2002 Basic and safety principles for man-machine interface, marking and identification - Coding principles for indicators and actuators
ANSI B65.1 : 2011 GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR GRAPHIC TECHNOLOGY EQUIPMENT AND SYSTEMS - PART 1: GENERAL REQUIREMENTS
ISO 3864-2:2016 Graphical symbols — Safety colours and safety signs — Part 2: Design principles for product safety labels
EN 378-1:2016 Refrigerating systems and heat pumps - Safety and environmental requirements - Part 1: Basic requirements, definitions, classification and selection criteria
ISO 13732-1:2006 Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 1: Hot surfaces
EN 614-2:2000+A1:2008 Safety of machinery - Ergonomic design principles - Part 2: Interactions between the design of machinery and work tasks
NFPA 79 : 2015 ELECTRICAL STANDARD FOR INDUSTRIAL MACHINERY
ISO 9355-1:1999 Ergonomic requirements for the design of displays and control actuators — Part 1: Human interactions with displays and control actuators
IEC 60204-1:2016 Safety of machinery - Electrical equipment of machines - Part 1: General requirements
IEC 60079-18:2014 RLV Explosive atmospheres - Part 18: Equipment protection by encapsulation “m”
ISO 11689:1996 Acoustics — Procedure for the comparison of noise-emission data for machinery and equipment
ISO 12643-3:2010 Graphic technology — Safety requirements for graphic technology equipment and systems — Part 3: Binding and finishing equipment and systems
IEC 61310-3:2007 Safety of machinery - Indication, marking and actuation - Part 3: Requirements for the location and operation of actuators
IEC 60204-11:2000 Safety of machinery - Electrical equipment of machines - Part 11: Requirements for HV equipment for voltages above 1 000 V a.c. or 1 500 V d.c. and not exceeding 36 kV
IEC 60947-5-1 : 4.0 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-1: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - ELECTROMECHANICAL CONTROL CIRCUIT DEVICES
IEC 60825-1:2014 Safety of laser products - Part 1: Equipment classification and requirements
ISO 14118:2000 Safety of machinery Prevention of unexpected start-up
NFPA 69 : 2014 EXPLOSION PREVENTION SYSTEMS
EN 1760-1:1997+A1:2009 Safety of machinery - Pressure sensitive protective devices - Part 1: General principles for the design and testing of pressure sensitive mats and pressure sensitive floors
ISO 13851:2002 Safety of machinery Two-hand control devices Functional aspects and design principles
ISO/TS 13732-2:2001 Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 2: Human contact with surfaces at moderate temperature
ISO 14123-1:2015 Safety of machinery Reduction of risks to health resulting from hazardous substances emitted by machinery Part 1: Principles and specifications for machinery manufacturers
ISO/TR 15847:2008 Graphic technology Graphical symbols for printing press systems and finishing systems, including related auxiliary equipment
IEC 60204-32:2008 Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines
ANSI B65.2 : 2011 GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR GRAPHIC TECHNOLOGY EQUIPMENT AND SYSTEMS - PART 2: PREPRESS AND PRESS EQUIPMENT AND SYSTEMS
EN 614-1:2006+A1:2009 Safety of machinery - Ergonomic design principles - Part 1: Terminology and general principles
IEC 60079-5:2015 RLV Explosive atmospheres - Part 5: Equipment protection by powder filling "q"
IEC 60079-11:2011 Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i"
NFPA 68 : 2013 EXPLOSION PROTECTION BY DEFLAGRATION VENTING
IEC 61491:2002 Electrical equipment of industrial machines - Serial data link for real-time communication between controls and drives
EN 1010-1:2004+A1:2010 Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 1: Common requirements
IEC 60447:2004 Basic and safety principles for man-machine interface, marking and identification - Actuating principles
EN 50081-2:1993 Electromagnetic compatibility - Generic emission standard - Part 2: Industrial environment
ISO 15534-3:2000 Ergonomic design for the safety of machinery — Part 3: Anthropometric data
EN 12753:2005+A1:2010 Thermal cleaning systems for exhaust gas from surface treatment equipment - Safety requirements
NFPA 86 : 2015 OVENS AND FURNACES
EN 1010-3:2002+A1:2009 Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 3: Cutting machines
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV Degrees of protection provided by enclosures (IP Code)
NFPA 70 : 2017 NATIONAL ELECTRICAL CODE
ISO 14121:1999 Safety of machinery Principles of risk assessment
EN 13023:2003+A1:2010 Noise measurement methods for printing, paper converting, paper making machines and auxiliary equipment - Accuracy grades 2 and 3
IEC 60079-6:2015 Explosive atmospheres - Part 6: Equipment protection by liquid immersion "o"
IEC 60079-0:2011 Explosive atmospheres - Part 0: Equipment - General requirements
EN 1010-4:2004+A1:2009 Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 4: Bookbinding, paper converting and finishing machines
ISO 12100-2:2003 Safety of machinery Basic concepts, general principles for design Part 2: Technical principles
ISO 13857:2008 Safety of machinery Safety distances to prevent hazard zones being reached by upper and lower limbs
IEC 61496-1:2012 Safety of machinery - Electro-sensitive protective equipment - Part 1: General requirements and tests
IEC 60079-14:2013 Explosive atmospheres - Part 14: Electrical installations design, selection and erection
ISO 3864-1:2011 Graphical symbols Safety colours and safety signs Part 1: Design principles for safety signs and safety markings
ISO 13854:2017 Safety of machinery — Minimum gaps to avoid crushing of parts of the human body
ISO 13856-1:2013 Safety of machinery — Pressure-sensitive protective devices — Part 1: General principles for design and testing of pressure-sensitive mats and pressure-sensitive floors
EN 12198-1:2000+A1:2008 Safety of machinery - Assessment and reduction of risks arising from radiation emitted by machinery - Part 1: General principles
ISO 12100-1:2003 Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology
ISO 15534-1:2000 Ergonomic design for the safety of machinery — Part 1: Principles for determining the dimensions required for openings for whole-body access into machinery
NFPA 77 : 2014 STATIC ELECTRICITY
ISO 3864-3:2012 Graphical symbols — Safety colours and safety signs — Part 3: Design principles for graphical symbols for use in safety signs
ISO 13850:2015 Safety of machinery Emergency stop function Principles for design
IEC 61310-1:2007 Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals
IEC 60947-3:2008+AMD1:2012+AMD2:2015 CSV Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units
EN 1760-2:2001+A1:2009 Safety of machinery - Pressure sensitive protective devices - Part 2: General principles for the design and testing of pressure sensitive edges and pressure sensitive bars
NFPA 54 : 2018 NATIONAL FUEL GAS CODE
EN 1760-3:2004+A1:2009 Safety of machinery - Pressure sensitive protective devices - Part 3: General principles for the design and testing of pressure sensitive bumpers, plates, wires and similar devices
IEC 60947-2:2016 Low-voltage switchgear and controlgear - Part 2: Circuit-breakers
IEC 62061:2005+AMD1:2012+AMD2:2015 CSV Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems
ISO 14122-2:2016 Safety of machinery — Permanent means of access to machinery — Part 2: Working platforms and walkways
ISO 11228-1:2003 Ergonomics Manual handling Part 1: Lifting and carrying
ISO 12643-2:2010 Graphic technology — Safety requirements for graphic technology equipment and systems — Part 2: Prepress and press equipment and systems
IEC 61010-1:2010+AMD1:2016 CSV Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements
ISO 13849-1:2015 Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design
ISO 15534-2:2000 Ergonomic design for the safety of machinery — Part 2: Principles for determining the dimensions required for access openings
ISO 9355-2:1999 Ergonomic requirements for the design of displays and control actuators — Part 2: Displays
IEC 61496-2:2013 Safety of machinery - Electro-sensitive protective equipment - Part 2: Particular requirements for equipment using active opto-electronic protective devices (AOPDs)
ISO 8031:2009 Rubber and plastics hoses and hose assemblies Determination of electrical resistance and conductivity
ISO 14123-2:2015 Safety of machinery Reduction of risks to health resulting from hazardous substances emitted by machinery Part 2: Methodology leading to verification procedures
ISO 11553-1:2005 Safety of machinery Laser processing machines Part 1: General safety requirements
ANSI/ASSE Z244.1 : 2016 THE CONTROL OF HAZARDOUS ENERGY LOCKOUT, TAGOUT AND ALTERNATIVE METHODS
EN 894-1:1997+A1:2008 Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 1: General principles for human interactions with displays and control actuators

View more information
US$23.96
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.